omegablast2002@yahoo.com be33659081
fix for cumulative upcost, extra cost were not being multiplied ...
[card]
name=Phyrexian Soulgorger
auto=cumulativeupcost[{S(creature|myBattlefield)}] sacrifice
text=Cumulative upkeep - Sacrifice a creature. (At the beginning of your upkeep, put an age counter on this permanent, then sacrifice it unless you pay its upkeep cost for each age counter on it.)
mana={3}
type=Snow Artifact Creature
subtype=Construct
power=8
toughness=8
[/card]
was only charging you 1 sacrifice per upkeep.
added thisTargetComparison, this(cantargetcard(targetchooser))...its a thisdescriptor that compares if the card can be targeted by a target chooser...
2011-12-29 19:55:45 +00:00
2011-10-26 22:14:12 +00:00
2011-11-29 21:50:16 +00:00
2011-12-25 01:01:20 +00:00
2011-11-19 14:07:57 +00:00
2011-09-20 03:06:06 +00:00
2011-11-06 17:31:44 +00:00
2011-12-11 13:48:24 +00:00
2011-11-19 14:07:57 +00:00
2011-10-01 13:30:30 +00:00
2011-01-21 18:01:14 +00:00
2011-12-25 01:01:20 +00:00
2011-12-08 20:50:36 +00:00
2011-09-01 20:03:26 +00:00
2011-10-01 13:30:30 +00:00
2011-01-21 18:01:14 +00:00
2011-10-13 12:25:58 +00:00
2011-12-25 01:01:20 +00:00
2011-12-18 09:40:35 +00:00
2011-10-01 13:30:30 +00:00
2011-09-20 11:32:24 +00:00
2011-07-29 17:43:45 +00:00
2011-10-02 09:05:39 +00:00
2011-10-02 14:11:30 +00:00
2011-01-21 18:01:14 +00:00
2011-01-21 18:01:14 +00:00
2011-01-28 06:00:51 +00:00
2011-11-23 19:11:48 +00:00
Resuming on my threading support work with the card caching mechanism. This change unfortunately touches quite a few files, but I needed to get it out of the way before things got out of hand: one significant hurdle is the assumed lifetime of a JQuad pointer. In a single threaded model, the life time of the pointer is clear: you fetch it into the cache, the cache makes room, you use the pointer immediately. In a multithreaded context however, it's unsafe, as the drawing thread can request a few JQuads, and the cache operating on a separate thread can potentially bounce a JQuad out of the cache before the draw routine is done using it, which ends up in an access violation when you attempt to draw using an invalidated quad pointer. To prevent this, the bulk of this change swaps out the use of naked JQuad* pointers in the code with a JQuadPtr, which is basically a typedef to a boost shared_ptr<JQuad>.
2011-02-01 10:37:21 +00:00
2011-06-03 20:01:50 +00:00
2011-05-06 06:40:00 +00:00
2011-02-10 17:19:11 +00:00
2011-11-23 19:11:48 +00:00
2011-01-21 18:01:14 +00:00
2011-11-09 14:27:56 +00:00
2011-10-26 22:14:12 +00:00
2011-11-29 21:50:16 +00:00
2011-12-15 11:11:08 +00:00
2011-09-04 02:45:18 +00:00
2011-09-06 21:08:25 +00:00
2011-10-13 12:25:58 +00:00
2011-11-23 19:11:48 +00:00
2011-12-11 13:48:24 +00:00
2011-01-21 18:01:14 +00:00
2011-12-13 15:14:47 +00:00
2011-01-21 18:01:14 +00:00
2011-01-21 18:01:14 +00:00
2011-10-01 13:30:30 +00:00
2011-10-01 13:30:30 +00:00
2011-10-01 13:30:30 +00:00
2011-10-01 13:30:30 +00:00
2011-10-01 13:30:30 +00:00
2011-10-01 13:30:30 +00:00
2011-10-01 13:30:30 +00:00
Resuming on my threading support work with the card caching mechanism. This change unfortunately touches quite a few files, but I needed to get it out of the way before things got out of hand: one significant hurdle is the assumed lifetime of a JQuad pointer. In a single threaded model, the life time of the pointer is clear: you fetch it into the cache, the cache makes room, you use the pointer immediately. In a multithreaded context however, it's unsafe, as the drawing thread can request a few JQuads, and the cache operating on a separate thread can potentially bounce a JQuad out of the cache before the draw routine is done using it, which ends up in an access violation when you attempt to draw using an invalidated quad pointer. To prevent this, the bulk of this change swaps out the use of naked JQuad* pointers in the code with a JQuadPtr, which is basically a typedef to a boost shared_ptr<JQuad>.
2011-02-01 10:37:21 +00:00
2011-10-01 13:30:30 +00:00
2011-10-01 13:30:30 +00:00
2011-07-04 19:09:19 +00:00
2011-11-13 22:36:34 +00:00
2011-12-29 19:55:45 +00:00
2011-04-28 07:49:51 +00:00
2011-08-14 14:42:37 +00:00
2011-10-13 12:25:58 +00:00
2011-11-29 21:50:16 +00:00
2011-08-07 04:01:56 +00:00
2011-12-25 01:01:20 +00:00
2011-10-13 12:25:58 +00:00
2011-11-29 21:50:16 +00:00
2011-11-23 19:11:48 +00:00
2011-10-26 22:14:12 +00:00
2011-01-21 18:01:14 +00:00
2011-11-19 14:07:57 +00:00
2011-10-01 14:24:07 +00:00
2011-03-13 21:19:02 +00:00
2011-04-23 08:43:34 +00:00
2011-04-20 07:50:00 +00:00
2011-01-21 18:01:14 +00:00
2011-11-29 21:50:16 +00:00
2011-11-19 14:07:57 +00:00
2011-01-21 18:01:14 +00:00
2011-06-02 05:33:45 +00:00
2011-10-01 13:30:30 +00:00
2011-08-14 18:09:02 +00:00
2011-04-29 17:30:57 +00:00
2011-04-20 07:50:00 +00:00
2011-01-21 18:01:14 +00:00
2011-09-01 20:03:26 +00:00
2011-11-29 21:50:16 +00:00
2011-11-13 22:36:34 +00:00
2011-06-04 16:22:45 +00:00
2011-12-15 11:11:08 +00:00
2011-01-28 06:00:51 +00:00
2011-09-17 21:27:36 +00:00
2011-01-21 18:01:14 +00:00
2011-05-16 23:19:08 +00:00
2011-11-19 14:07:57 +00:00
2011-10-01 13:30:30 +00:00
2011-11-23 19:11:48 +00:00
2011-10-01 13:30:30 +00:00
2011-11-29 21:50:16 +00:00
2011-01-28 06:00:51 +00:00
2011-12-29 19:55:45 +00:00
2011-11-29 21:50:16 +00:00
2011-01-21 18:01:14 +00:00
2010-02-27 18:49:03 +00:00
2011-11-06 19:58:23 +00:00
2011-12-29 13:15:44 +00:00
2011-04-20 06:27:44 +00:00
Resuming on my threading support work with the card caching mechanism. This change unfortunately touches quite a few files, but I needed to get it out of the way before things got out of hand: one significant hurdle is the assumed lifetime of a JQuad pointer. In a single threaded model, the life time of the pointer is clear: you fetch it into the cache, the cache makes room, you use the pointer immediately. In a multithreaded context however, it's unsafe, as the drawing thread can request a few JQuads, and the cache operating on a separate thread can potentially bounce a JQuad out of the cache before the draw routine is done using it, which ends up in an access violation when you attempt to draw using an invalidated quad pointer. To prevent this, the bulk of this change swaps out the use of naked JQuad* pointers in the code with a JQuadPtr, which is basically a typedef to a boost shared_ptr<JQuad>.
2011-02-01 10:37:21 +00:00
2011-11-09 14:27:56 +00:00
2011-01-30 11:14:36 +00:00
2011-01-21 18:01:14 +00:00
2011-10-09 05:51:45 +00:00
Resuming on my threading support work with the card caching mechanism. This change unfortunately touches quite a few files, but I needed to get it out of the way before things got out of hand: one significant hurdle is the assumed lifetime of a JQuad pointer. In a single threaded model, the life time of the pointer is clear: you fetch it into the cache, the cache makes room, you use the pointer immediately. In a multithreaded context however, it's unsafe, as the drawing thread can request a few JQuads, and the cache operating on a separate thread can potentially bounce a JQuad out of the cache before the draw routine is done using it, which ends up in an access violation when you attempt to draw using an invalidated quad pointer. To prevent this, the bulk of this change swaps out the use of naked JQuad* pointers in the code with a JQuadPtr, which is basically a typedef to a boost shared_ptr<JQuad>.
2011-02-01 10:37:21 +00:00
2011-08-21 09:04:59 +00:00
2011-10-02 09:05:39 +00:00
be33659081