cadence_uart_init() initializes an I/O memory region of size 0x1000
bytes. However in uart_write(), the 'offset' parameter (offset within
region) is divided by 4 and then used to index the array 'r' of size
CADENCE_UART_R_MAX which is much smaller: (0x48/4). If 'offset>>=2'
exceeds CADENCE_UART_R_MAX, this will cause an out-of-bounds memory
write where the offset and the value are controlled by guest.
This will corrupt QEMU memory, in most situations this causes the vm to
crash.
Fix by checking the offset against the array size.
Cc: qemu-stable@nongnu.org
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20160418100735.GA517@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 5eb0b194e9)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Commit "156a2e4 ehci: make idt processing more robust" tries to avoid a
DoS by the guest (create a circular iTD queue and let qemu ehci
emulation run in circles forever). Unfortunately this has two problems:
First it misses the case of siTDs, and second it reportedly breaks
FreeBSD.
So lets go for a different approach: just count the number of iTDs and
siTDs we have seen per frame and apply a limit. That should really
catch all cases now.
Reported-by: 杜少博 <dushaobo@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 1ae3f2f178)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Call vbe_update_vgaregs() when the guest touches GFX, SEQ or CRT
registers, to make sure the vga registers will always have the
values needed by vbe mode. This makes sure the sanity checks
applied by vbe_fixup_regs() are effective.
Without this guests can muck with shift_control, can turn on planar
vga modes or text mode emulation while VBE is active, making qemu
take code paths meant for CGA compatibility, but with the very
large display widths and heigts settable using VBE registers.
Which is good for one or another buffer overflow. Not that
critical as they typically read overflows happening somewhere
in the display code. So guests can DoS by crashing qemu with a
segfault, but it is probably not possible to break out of the VM.
Fixes: CVE-2016-3712
Reported-by: Zuozhi Fzz <zuozhi.fzz@alibaba-inc.com>
Reported-by: P J P <ppandit@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Call the new vbe_update_vgaregs() function on vbe configuration
changes, to make sure vga registers are up-to-date.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When enabling vbe mode qemu will setup a bunch of vga registers to make
sure the vga emulation operates in correct mode for a linear
framebuffer. Move that code to a separate function so we can call it
from other places too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
vga allows banked access to video memory using the window at 0xa00000
and it supports a different access modes with different address
calculations.
The VBE bochs extentions support banked access too, using the
VBE_DISPI_INDEX_BANK register. The code tries to take the different
address calculations into account and applies different limits to
VBE_DISPI_INDEX_BANK depending on the current access mode.
Which is probably effective in stopping misprogramming by accident.
But from a security point of view completely useless as an attacker
can easily change access modes after setting the bank register.
Drop the bogus check, add range checks to vga_mem_{readb,writeb}
instead.
Fixes: CVE-2016-3710
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
With Hyper-V enabled CPU hotplug stops working. The CPU appears
in device manager on Windows but does not appear in peformance
monitor and control panel.
The root of the problem is the following. Windows checks
HV_X64_CPU_DYNAMIC_PARTITIONING_AVAILABLE bit in CPUID. The
presence of this bit is enough to cure the situation.
The bit should be set when CPU hotplug is allowed for HyperV VM.
The check that hot_add_cpu callback is defined is enough from the
protocol point of view. Though this callback is defined almost
always thus there is no need to export that knowledge in the
other way.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Andreas Färber" <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
(cherry picked from commit 4467c6c118)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Commit d62d9dc4b8 lifted streamOptimized images's version to 3, but we
now refuse to open version 3 images read-write. We need to make
streamOptimized an exception to allow converting to it. This fixes the
accidentally broken iotests case 059 for the same reason.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
(cherry picked from commit 3db1d98a20)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When processing remote NDIS control message packets,
the USB Net device emulator uses a fixed length(4096) data buffer.
The incoming informationBufferOffset & Length combination could
overflow and cross that range. Check control message buffer
offsets and length to avoid it.
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 1455648821-17340-3-git-send-email-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit fe3c546c5f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
While computing IP checksum, 'net_checksum_calculate' reads
payload length from the packet. It could exceed the given 'data'
buffer size. Add a check to avoid it.
Reported-by: Liu Ling <liuling-it@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 362786f14a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When processing NCQ commands, AHCI device emulation prepares a
NCQ transfer object; To which an aio control block(aiocb) object
is assigned in 'execute_ncq_command'. In case, when the NCQ
command is invalid, the 'aiocb' object is not assigned, and NCQ
transfer object is left as 'used'. This leads to a use after
free kind of error in 'bdrv_aio_cancel_async' via 'ahci_reset_port'.
Reset NCQ transfer object to 'unused' to avoid it.
[Maintainer edit: s/ACHI/AHCI/ in the commit message. --js]
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1452282511-4116-1-git-send-email-ppandit@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
(cherry picked from commit 4ab0359a8a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Hello,
A null pointer dereference issue was reported by Mr Ling Liu, CC'd here. It
occurs while doing I/O port write operations via hmp interface. In that,
'current_cpu' remains null as it is not called from cpu_exec loop, which
results in the said issue.
Below is a proposed (tested)patch to fix this issue; Does it look okay?
===
From ae88a4947fab9a148cd794f8ad2d812e7f5a1d0f Mon Sep 17 00:00:00 2001
From: Prasad J Pandit <pjp@fedoraproject.org>
Date: Fri, 18 Dec 2015 11:16:07 +0530
Subject: [PATCH] i386: avoid null pointer dereference
When I/O port write operation is called from hmp interface,
'current_cpu' remains null, as it is not called from cpu_exec()
loop. This leads to a null pointer dereference in vapic_write
routine. Add check to avoid it.
Reported-by: Ling Liu <liuling-it@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <alpine.LFD.2.20.1512181129320.9805@wniryva>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: P J P <ppandit@redhat.com>
(cherry picked from commit 4c1396cb57)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When processing 'sendkey' command, hmp_sendkey routine null
terminates the 'keyname_buf' array. This results in an OOB
write issue, if 'keyname_len' was to fall outside of
'keyname_buf' array.
Since the keyname's length is known the keyname_buf can be
removed altogether by adding a length parameter to
index_from_key() and using it for the error output as well.
Reported-by: Ling Liu <liuling-it@360.cn>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Message-Id: <20160113080958.GA18934@olga>
[Comparison with "<" dumbed down, test for junk after strtoul()
tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
(cherry picked from commit 64ffbe04ea)
Conflicts:
hmp.c
*removed dependency on 7fb1cf16
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Migration of pseries-2.3 doesn't have configuration section. Unfortunately,
QEMU 2.4/2.4.1/2.5 are buggy and always stream and expect the configuration
section, and break migration both ways.
This patch introduces a property which allows to enforce a configuration
section for machines who don't have one.
It can be set at startup:
-machine enforce-config-section=on
or later from the QEMU monitor:
qom-set /machine enforce-config-section on
It is up to the tooling to set or unset this property according to the
version of the QEMU at the other end of the pipe.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
(cherry picked from commit 902c053d83)
Conflicts:
qemu-options.hx
* removed context dependency on 87252e1b
* added to provide 2.5<->2.5.1 migration compat option for
pseries-2.3 machines
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Commit e1ce0c3cb (vl.c: fix regression when reading machine type
from config file) fixed the error message when the machine type
was supplied inside the config file. However now the option name
is not displayed correctly if the error happens when the machine
is specified at command line.
Running
./x86_64-softmmu/qemu-system-x86_64 -M q35-1.5 -redir tcp:8022::22
will result in the error message:
qemu-system-x86_64: -redir tcp:8022::22: unsupported machine type
Use -machine help to list supported machines
Fixed it by restoring the error location and also extracted the code
dealing with machine options into a separate function.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1455303747-19776-2-git-send-email-ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
(cherry picked from commit 34f405ae6d)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The v8 ARM ARM defines that unused spaces in the ID_AA64* system
register ranges are Reserved and must RAZ, rather than being UNDEF.
Implement this.
In particular, ARM v8.2 adds a new feature register ID_AA64MMFR2,
and newer versions of the Linux kernel will attempt to read this,
which causes them not to boot up on versions of QEMU missing this fix.
Since the encoding .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 6
is actually defined in ARMv8 (as ID_MMFR4), we give it an entry in
the ARMCPU struct so CPUs can override it, though since none do
this too will just RAZ.
Cc: qemu-stable@nongnu.org
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1455890863-11203-1-git-send-email-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
(cherry picked from commit e20d84c140)
Conflicts:
target-arm/helper.c
* remove context dep on 4054bfa9
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
vhost currently merges regions with contiguious virtual and physical
addresses. This breaks for vhost-user since that also needs fds to
match.
Add a vhost_ops entry to compare the fds for vhost-user only.
Cc: qemu-stable@nongnu.org
Cc: Victor Kaplansky <victork@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit ffe42cc14c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Since QEMU 2.4, we have a configuration section in the migration stream.
This must be skipped for older machines, like it is already done for x86.
This patch fixes the migration of pseries-2.3 from/to QEMU 2.3, but it
breaks migration of the same machine from/to QEMU 2.4/2.4.1/2.5. We do
that anyway because QEMU 2.3 is likely to be more widely deployed than
newer QEMU versions.
Fixes: 61964c23e5
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
(cherry picked from commit 09b5e30da5)
Conflicts:
hw/ppc/spapr.c
*remove dep on 5013c5474
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The start_xmit() and e1000_receive_iov() functions implement DMA transfers
iterating over a set of descriptors that the guest's e1000 driver
prepares:
- the TDLEN and RDLEN registers store the total size of the descriptor
area,
- while the TDH and RDH registers store the offset (in whole tx / rx
descriptors) into the area where the transfer is supposed to start.
Each time a descriptor is processed, the TDH and RDH register is bumped
(as appropriate for the transfer direction).
QEMU already contains logic to deal with bogus transfers submitted by the
guest:
- Normally, the transmit case wants to increase TDH from its initial value
to TDT. (TDT is allowed to be numerically smaller than the initial TDH
value; wrapping at or above TDLEN bytes to zero is normal.) The failsafe
that QEMU currently has here is a check against reaching the original
TDH value again -- a complete wraparound, which should never happen.
- In the receive case RDH is increased from its initial value until
"total_size" bytes have been received; preferably in a single step, or
in "s->rxbuf_size" byte steps, if the latter is smaller. However, null
RX descriptors are skipped without receiving data, while RDH is
incremented just the same. QEMU tries to prevent an infinite loop
(processing only null RX descriptors) by detecting whether RDH assumes
its original value during the loop. (Again, wrapping from RDLEN to 0 is
normal.)
What both directions miss is that the guest could program TDLEN and RDLEN
so low, and the initial TDH and RDH so high, that these registers will
immediately be truncated to zero, and then never reassume their initial
values in the loop -- a full wraparound will never occur.
The condition that expresses this is:
xdh_start >= s->mac_reg[XDLEN] / sizeof(desc)
i.e., TDH or RDH start out after the last whole rx or tx descriptor that
fits into the TDLEN or RDLEN sized area.
This condition could be checked before we enter the loops, but
pci_dma_read() / pci_dma_write() knows how to fill in buffers safely for
bogus DMA addresses, so we just extend the existing failsafes with the
above condition.
This is CVE-2016-1981.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Petr Matousek <pmatouse@redhat.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Prasad Pandit <ppandit@redhat.com>
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: qemu-stable@nongnu.org
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1296044
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit dd793a7488)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This fixes a regression introduced with commit 3f09bfbc7. Multiple
bugs arise in conjunction with live snapshots and mirroring operations
(which include active layer commit).
After a live snapshot occurs, the active layer and the base layer both
have a non-NULL tqe_prev field in the device_list, although the base
node's tqe_prev field points to a NULL entry. This non-NULL tqe_prev
field occurs after the bdrv_append() in the external snapshot calls
change_parent_backing_link().
In change_parent_backing_link(), when the previous active layer is
removed from device_list, the device_list.tqe_prev pointer is not
set to NULL.
The operating scheme in the block layer is to indicate that a BDS belongs
in the bdrv_states device_list iff the device_list.tqe_prev pointer
is non-NULL.
This patch does two things:
1.) Introduces a new block layer helper bdrv_device_remove() to remove a
BDS from the device_list, and
2.) uses that new API, which also fixes the regression once used in
change_parent_backing_link().
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 0cd51e11c0666c04ddb7c05293fe94afeb551e89.1454376655.git.jcody@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
(cherry picked from commit f8aa905a4f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Commit 6c2f9a15 ensured that we would not return NULL when the
caller used an output visitor but had nothing to visit. But
in doing so, it added a FIXME about a reference count leak
that could abort qemu in the (unlikely) case of SIZE_MAX such
visits (more plausible on 32-bit). (Although that commit
suggested we might fix it in time for 2.5, we ran out of time;
fortunately, it is unlikely enough to bite that it was not
worth worrying about during the 2.5 release.)
This fixes things by documenting the internal contracts, and
explaining why the internal function can return NULL and only
the public facing interface needs to worry about qnull(),
thus avoiding over-referencing the qnull_ global object.
It does not, however, fix the stupidity of the stack mixing
up two separate pieces of information; add a FIXME to explain
that issue, which will be fixed shortly in a future patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Cc: qemu-stable@nongnu.org
Message-Id: <1454075341-13658-25-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
(cherry picked from commit a861564015)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Jiri saw a hang on pause_all_vcpus called from postcopy_start,
where the cpus are all apparently stopped ('stopped' flag set)
but pause_all_vcpus is still stuck on a cond_wait on qemu_paused_cond.
We suspect this is happening if a qmp_stop is called at about the
same time as the postcopy code calls that pause_all_vcpus;
although they both should have the main lock held, Paolo spotted
the cond_wait unlocks the global lock so perhaps they both
could end up waiting at the same time?
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reported-by: Jiri Denemark <jdenemar@redhat.com>
Message-Id: <1453716498-27238-1-git-send-email-dgilbert@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 96bce6831b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When calculating a pointer to the currently selected fw_cfg item, the
following is used:
FWCfgEntry *e = &s->entries[arch][s->cur_entry & FW_CFG_ENTRY_MASK];
When s->cur_entry is FW_CFG_INVALID, we are calculating the address of
a non-existent element in s->entries[arch][...], which is undefined.
This patch ensures the resulting entry pointer is set to NULL whenever
s->cur_entry is FW_CFG_INVALID.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Message-id: 1446733972-1602-5-git-send-email-somlo@cmu.edu
Cc: Marc Marí <markmb@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 66f8fd9dda)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
large volume DASD that have > 64k cylinders do claim to have
0xFFFE cylinders as special value in the old 16 bit field. We
want to pass this "token" along to the guest, instead of
calculating the real number. Otherwise qemu might fail with
"cyls must be between 1 and 65535"
Cc: qemu-stable@nongnu.org
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 972b543c6b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
After clearing the status register we also have to update the irq line
status. Otherwise a irq which happends to be pending at reset time
causes a interrupt storm. And the guest can't stop as the status
register doesn't indicate any pending interrupt.
Both NetBSD and FreeBSD hang on shutdown because of that.
Cc: qemu-stable@nongnu.org
Reported-by: Andrey Korolyov <andrey@xdel.ru>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1453203884-4125-1-git-send-email-kraxel@redhat.com
(cherry picked from commit 5a8660741a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
commit 5be7d9f1b1
vhost-net: tell tap backend about the vnet endianness
makes vhost net to set the endianness of the device, but only for
the first device.
In case of multiqueue, we have multiple devices... This patch sets the
endianness for all the devices of the interface.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit a407644079)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Ne2000 NIC uses ring buffer of NE2000_MEM_SIZE(49152)
bytes to process network packets. Registers PSTART & PSTOP
define ring buffer size & location. Setting these registers
to invalid values could lead to infinite loop or OOB r/w
access issues. Add check to avoid it.
Reported-by: Yang Hongke <yanghongke@huawei.com>
Tested-by: Yang Hongke <yanghongke@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 415ab35a44)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
'change' and related operations did not work when used on guest devices
featuring removable media but no actual tray, because
blk_dev_is_tray_open() always returned false for them and the
blockdev-{insert,remove}-medium commands required it to return true.
Fix this by making blockdev-{insert,remove}-medium work on tray-less
devices. Also, blockdev-{open,close}-tray are now explicitly no-ops when
invoked on such devices, and blk_dev_change_media_cb() is instead
called by blockdev-{insert,remove}-medium (for tray-less devices only).
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 1454096953-31773-3-git-send-email-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 12c7ec87a7)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
While processing transmit(tx) descriptors in 'tx_consume' routine
the switch emulator suffers from an off-by-one error, if a
descriptor was to have more than allowed(ROCKER_TX_FRAGS_MAX=16)
fragments. Fix an incorrect bounds check to avoid it.
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 007cd223de)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
While processing controller 'CTRL_GET_INFO' command, the routine
'megasas_ctrl_get_info' overflows the '&info' object size. Use its
appropriate size to null initialise it.
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <alpine.LFD.2.20.1512211501420.22471@wniryva>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: P J P <ppandit@redhat.com>
(cherry picked from commit 36fef36b91)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The aio_context_new() function does not allocate a thread pool. This is
deferred to the first call to the aio_get_thread_pool() accessor. It is
hence forbidden to access the thread_pool field directly, as it may be
NULL. The accessor *must* be used always.
Fixes: ebac1202c9
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: qemu-stable@nongnu.org
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
(cherry picked from commit 4b3a4f2d45)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reading twice the same field could give the guest an attack of
opportunity. In the case of event->type, gcc could compile the switch
statement into a jump table, effectively ending up reading the type
field multiple times.
This is part of XSA-155.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
(cherry picked from commit 7ea11bf376)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
src is stored in shared memory and src->nr_segments is dereferenced
twice at the end of the function. If a compiler decides to compile this
into two separate memory accesses then the size limitation could be
bypassed.
Fix it by removing the double access to src->nr_segments.
This is part of XSA-155.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
(cherry picked from commit f9e98e5d7a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Unfortunately the OpenBSD pdksh does not like brackets inside
the right part of a ${variable+word} parameter expansion:
$ echo "${a+($b)}"
ksh: ${a+($b)}": bad substitution
though both bash and dash accept them. In any case this line
was causing odd output in the case where nettle is not present:
nettle no ()
(because if nettle is not present then $nettle will be "no",
not a null string or unset).
Rewrite it to just use an if.
This bug was originally introduced in becaeb726 and was present
in the 2.4.0 release.
Fixes: https://bugs.launchpad.net/qemu/+bug/1525682
Reported-by: Dmitrij D. Czarkoff
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1450105357-8516-1-git-send-email-peter.maydell@linaro.org
(cherry picked from commit 18f49881cf)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
On VSX capable CPUs, the 32 FP registers are mapped to the high-bits
of the 32 first VSX registers. So if you have:
VSR31 = (uint128) 0x0102030405060708090a0b0c0d0e0f00
then
FPR31 = (uint64) 0x0102030405060708
The kernel stores the VSX registers in the fp_state struct following the
host endian element ordering.
On big-endian:
fp_state.fpr[31][0] = 0x0102030405060708
fp_state.fpr[31][1] = 0x090a0b0c0d0e0f00
On little-endian:
fp_state.fpr[31][0] = 0x090a0b0c0d0e0f00
fp_state.fpr[31][1] = 0x0102030405060708
The KVM_GET_ONE_REG and KVM_SET_ONE_REG ioctls preserve this ordering, but
QEMU considers it as big-endian and always copies element [0] to the
fpr[] array and element [1] to the vsr[] array. This does not work with
little-endian hosts, and you will get:
(qemu) p $f31
0x90a0b0c0d0e0f00
instead of:
(qemu) p $f31
0x102030405060708
This patch fixes the element ordering for little-endian hosts.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
(cherry picked from commit 3a4b791b4c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Vmxnet3 device emulator does not check if the device is active
before activating it, also it did not free the transmit & receive
buffers while deactivating the device, thus resulting in memory
leakage on the host. This patch fixes both these issues to avoid
host memory leakage.
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit aa4a3dce1c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Make ehci_process_itd return an error in case we didn't do any actual
iso transfer because we've found no active transaction. That'll avoid
ehci happily run in circles forever if the guest builds a loop out of
idts.
This is CVE-2015-8558.
Cc: qemu-stable@nongnu.org
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Tested-by: P J P <ppandit@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 156a2e4dbf)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
While in the long term we want throttling to be its own block filter
BDS, in the short term we want it to be part of the BB instead of a BDS;
even in the long term we may want legacy throttling to be automatically
tied to the BB.
blockdev-insert-medium and blockdev-remove-medium do not retain
throttling information in the BB (deliberately so). Therefore, using
them means tying this information to a BDS, which would break the model
described above. (The same applies to other flags such as
detect_zeroes.) We probably want to move this information to the BB or
its own filter BDS before blockdev-{insert,remove}-medium can be
considered completely stable.
Therefore, mark these functions experimental for the time being.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1449847385-13986-2-git-send-email-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
[PMM: fixed format nit (underlining) in qmp-commands.hx]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
My fix (84e7b80a) replaced the last_sent_block update that I'd
removed earlier; however it was too aggressive in the xbzrle case.
save_xbzrle_page might return '0' to mean that the page didn't
need sending since it was the same as the last sent version;
in this case we can't update 'last_sent_block' since we didn't
actually send it.
Symptom: 'Illegal RAM offset 1018000' as we try and send a page
to the wrong RAMBlock; potentially that could be a data
corruption if you were really unlucky.
Fixes: 84e7b80a05
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 1449765106-6528-1-git-send-email-dgilbert@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
LEON3 allows the CASA instruction to be used from user space
if the ASI is set to 0xa (user data).
Signed-off-by: Alex Zuepke <azu@sysgo.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since commit 4652f1640e "virtio-9p: add savevm
handlers", if the user hot-unplugs a quiescent 9p device and live
migrates, the source QEMU crashes before migration completetion...
This happens because virtio-9p devices have a realize handler which
calls virtio_init() and register_savevm(). Both calls store pointers
to the device internals, that get dereferenced during migration even
if the device got unplugged.
This patch simply adds an unrealize handler to perform minimal
cleanup and avoid the crash. Hot unplug of non-quiescent 9p devices
is still not supported in QEMU, and not supported by linux guests
either.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20151208155457.27775.69441.stgit@bahia.huguette.org
[PMM: rewrapped long lines in commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
blk_attach_dev() fails here only when we're working for device
"sdhci-pci" (which already attached the backend), and then we don't
want to attach a second time. If we ever create another failure mode,
we're setting up ourselves to using the same backend from multiple
frontends, which is likely to end in tears. Can't clean this up this
close to the release, so mark it FIXME.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1449503710-3707-3-git-send-email-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We currently fuse controller and card into a single device model, but
we intend qomify things properly and separate the two. The properties
that really belong to the card would then have to somehow pass-through
to the card's properties. To avoid that complication, either mark
them experimental or drop them.
Properties "capareg", "maxcurr" and the usual PCI device properties
belong to the controller. Property "drive" belongs to the card;
rename it to "x-drive". Properties "logical_block_size",
"physical_block_size", "min_io_size", "opt_io_size",
"discard_granularity" belong to the card, but have no effect; drop
them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1449503710-3707-2-git-send-email-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The official way of enabling dataplane is through the "iothread"
property that references an iothread object created by "-object
iothread". Since the old "x-data-plane=on" way now even crashes, it's
probably easier to just drop it:
$ qemu-system-x86_64 -drive file=null-co://,id=d0,if=none \
-device virtio-blk-pci,drive=d0,x-data-plane=on
ERROR:/home/fam/work/qemu/qom/object.c:1515:
object_get_canonical_path_component: assertion failed: (obj->parent != NULL)
Aborted
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1449485967-19240-1-git-send-email-famz@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# gpg: Signature made Mon 07 Dec 2015 14:06:07 GMT using RSA key ID 398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
lan9118: log and ignore access to invalid registers, rather than aborting
lan9118: fix emulation of MAC address loaded bit in E2P_CMD register
vmxnet3: silence warning
pcnet: fix rx buffer overflow(CVE-2015-7512)
net: pcnet: add check to validate receive data size(CVE-2015-7504)
e1000: fix hang of win2k12 shutdown with flood ping
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With this change, access to invalid/unimplemented device registers are
logged as a "guest error" rather than aborting qemu with
hw_error. This enables drivers for similar devices (e.g. SMSC 9221),
by simply ignoring the unimplemented writes. It's also closer to what
real hardware does.
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
There appears to have been a longstanding typo in the implementation
of the "MAC address loaded" bit in the E2P_CMD (EEPROM command)
register. The code was using 0x10, but the controller spec says it
should be bit 8 (0x100).
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
vmxnet3 always produces a warning under qtest.
This is not a user error, don't warn.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Backends could provide a packet whose length is greater than buffer
size. Check for this and truncate the packet to avoid rx buffer
overflow in this case.
Cc: Prasad J Pandit <pjp@fedoraproject.org>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
In loopback mode, pcnet_receive routine appends CRC code to the
receive buffer. If the data size given is same as the buffer size,
the appended CRC code overwrites 4 bytes after s->buffer. Added a
check to avoid that.
Reported by: Qinghao Tang <luodalongde@gmail.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
e1000 driver in Win2k12 is really well rotten. It 100% hangs on shutdown
of UP VM under flood ping. The guest checks card state and reinjects
itself interrupt in a loop. This is fatal for UP machine.
There is no good way to fix this misbehavior but to kludge it. The
emulation has interrupt throttling register aka ITR which limits
interrupt rate and allows the guest to proceed this phase.
There is no problem with this kludge for Linux guests - it adjust the
value of it itself.
On the other hand according to the initial research in
commit e9845f0985
Author: Vincenzo Maffione <v.maffione@gmail.com>
Date: Fri Aug 2 18:30:52 2013 +0200
e1000: add interrupt mitigation support
...
Interrupt mitigation boosts performance when the guest suffers from
an high interrupt rate (i.e. receiving short UDP packets at high packet
rate). For some numerical results see the following link
http://info.iet.unipi.it/~luigi/papers/20130520-rizzo-vm.pdf
this should also boost performance a bit.
See https://bugzilla.redhat.com/show_bug.cgi?id=874406 for additional
details.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Vincenzo Maffione <v.maffione@gmail.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We have several function parameters declared as void (*fn). This is
just a stupid way to write void *, and the only purpose writing it
like that could serve is obscuring the sin of bypassing the type
system without need.
The original sin is commit 49ee359: its qtest_add_func() is a wrapper
for g_test_add_func(). Fix the parameter type to match
g_test_add_func()'s. This uncovers type errors in ide-test.c; fix
them.
Commit 7949c0e faithfully repeated the sin for qtest_add_data_func().
Fix it the same way, along with a harmless type error uncovered in
vhost-user-test.c.
Commit 063c23d repeated it for qtest_add_abrt_handler(). The screwy
parameter gets assigned to GHook member func, so change its type to
match. Requires wrapping kill_qemu() to keep the type checker happy.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[AF/armbru: Inline GTestFunc/GTestDataFunc typedef for old GLib]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
ppc patch queue for 2.5 2015-12-04
This contains some last minute QOM behaviour fixes from Markus
Armbruster.
# gpg: Signature made Fri 04 Dec 2015 06:43:54 GMT using RSA key ID 20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.5-20151204:
spapr_drc: Change value of property "fdt" from null back to {}
spapr_drc: Make device "spapr-dr-connector" unavailable with -device
spapr_drc: Handle visitor errors properly
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
See http://permalink.gmane.org/gmane.linux.bluez.kernel/36505. For historical
reasons these do not use sizeof, and Coverity caught a mistake in
EVT_ENCRYPT_CHANGE_SIZE.
In addition:
- remove status from create_conn_cancel_cp; the "status" field is only
in rp structs. Note that this means that the OCF_CREATE_CONN_CANCEL
could never have worked (it would have failed the LENGTH_CHECK), but
I am keeping it anyway.
- OCF_READ_LINK_QUALITY similarly could never have worked, but I am
fixing read_link_quality_cp anyway.
- fix inquiry_info which is shorter by one: the kernel has a struct that
is 14 byte long, but not counting the initial num_responses byte which
the kernel parses separately;
- remove extended_inquiry_info altogether, since it's not used and unlike
the other inquiry structs does not have the initial num_responses byte.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
"Please keep this list in alphabetical order" has been more honoured
in the breach than in the observance. Clean up.
While there, drop a redundant struct declaration.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The check for stack-protector support consisted in compiling and linking
the test program below (output by function write_c_skeleton()) with the
compiler flag -fstack-protector-strong first and then with
-fstack-protector-all if the first one failed to work:
int main(void) { return 0; }
This caused false positives when using certain toolchains in which the
compiler accepted -fstack-protector-strong but no support was provided
by the C library, since for this stack-protector variant the compiler
emits canary code only for functions that meet specific conditions
(local arrays, memory references to local variables, etc.) and the code
fragment under test included none of them (hence no stack protection
code generated, no link failure).
This fix changes the test program used for -fstack-protector checks to
include a function that meets conditions which cause the compiler to
generate canary code in all variants.
Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In qcrypto_tls_creds_get_path() coverity complains that
we are checking '*creds' for NULL, despite having
dereferenced it previously. This is harmless bug due
to fact that the trace call was too early. Moving it
after the cleanup gets the desired semantics.
In qcrypto_tls_creds_check_cert_key_purpose() coverity
complains that we're passing a pointer to a previously
free'd buffer into gnutls_x509_crt_get_key_purpose_oid()
This is harmless because we're passing a size == 0, so
gnutls won't access the buffer, but rather just report
what size it needs to be. We can avoid it though by
explicitly setting the buffer to NULL after free'ing
it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently if the user's compiler works for creating .o files but
their linker is broken such that compiling an executable from a
C file does not work, we will report a misleading error message
about the compiler not supporting __thread (since that happens
to be the first test we run which requires a working linker).
Explicitly check that compile_prog works as well as compile_object,
so that people whose toolchain setup is broken get a more helpful
error message.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In the case of a 4-byte length, shifting a value by 24 may cause
an unintended sign extension when converting from int to size_t.
Use a uint32_t variable instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Trivial: this array should be allocated to have ID_MAX entries always.
Otherwise if someone were to forget to expand this table, the assertion
in the id generator won't actually trigger; it will read junk data.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
prop_get_fdt() misuses the visitor API: when fdt is null, it doesn't
visit anything. object_property_get_qobject() happily
object_property_get_qobject(). Amazingly, the latter survives the
misuse. Turns out we've papered over it long before prop_get_fdt()
existed, in commit 1d10b44.
However, commit 6c2f9a1 changed how we paper over it, and as a side
effect changed qom-get's value from {} to null. Change it right back
by fixing the visitor misuse.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It should only be created via spapr_dr_connector_new(). Attempting to
create it with -device crashes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since prop_get_fdt() is only used with QmpOutputVisitor, errors
shouldn't actually happen, so this is only a latent bug.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It doesn't have "GSList *interfaces" anymore, drop the paragraph.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit e253c28 ("tests: Fix how qom-test is run") introduced
$(qtest-generic-y) and used it for check-qtest-% target, but did not
update check-report-qtest-%. This causes check-report-qtest-aarch64.xml
target to fail with a gtester usage error for lack of test arguments.
Fix this by adding $(qtest-generic-y) in check-report-qtest-%.
Also add it in check-clean target, spotted by Markus.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
While sending 'SetPixelFormat' messages to a VNC server,
the client could set the 'red-max', 'green-max' and 'blue-max'
values to be zero. This leads to a floating point exception in
write_png_palette while doing frame buffer updates.
Reported-by: Lian Yihan <lianyihan@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# gpg: Signature made Thu 03 Dec 2015 04:59:48 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request:
iotests: Add regresion test case for write notifier assertion failure
iotests: Add "add_drive_raw" method
block: Don't wait serialising for non-COR read requests
iothread: include id in thread name
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
migration/next for 20151203
# gpg: Signature made Wed 02 Dec 2015 23:19:10 GMT using RSA key ID 5872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
* remotes/juanquintela/tags/migration/20151203:
migration: do floating-point division
migration: Clean up use of g_poll() in socket_writev_buffer()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The idea is to let the top level bs have a big request alignment with
blkdebug, so that the aio_write request issued from monitor will be
serialised. This tests that QEMU doesn't crash upon the read request
from the backup job's write notifier, which is a very special case of
"reentrant" request.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1448962590-2842-4-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The assertion problem was noticed in 06c3916b35, but it wasn't
completely fixed, because even though the req is not marked as
serialising, it still gets serialised by wait_serialising_requests
against other serialising requests, which could lead to the same
assertion failure.
Fix it by even more explicitly skipping the serialising for this
specific case.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1448962590-2842-2-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This makes it easier to find the desired thread. Use "IO" plus the id;
even with the 14 character limit on the thread name, enough of the id should
be readable (e.g. "IO iothreadNNN" with three characters for the number).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1448372804-5034-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio,vhost,mmap fixes for 2.5
vhost test patches to fix the travis build
virtio ccw patch to fix virtio 1
virtio pci patch to fix pci express
vhost user bridge patch to fix fd leaks
mmap-alloc patch to fix hugetlbfs on ppc64
remove dead code for vhost (trivial)
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 02 Dec 2015 20:38:41 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
util/mmap-alloc: fix hugetlb support on ppc64
virtio-pci: Set the QEMU_PCI_CAP_EXPRESS capability early in its DeviceClass realize method
virtio: handle non-virtio-1-capable backend for ccw
tests/vhost-user-bridge.c: fix fd leakage
vhost: drop dead code
vhost-user: verify that number of queues is non-zero
vhost-user-test: fix crash with glib < 2.36
vhost-user-test: use unix port for migration
vhost-user-test: fix chardriver race
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Dividing integer expressions transferred_bytes and time_spent, and then converting
the integer quotient to type double. Any remainder, or fractional part of the
quotient, is ignored. Fix this.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
socket_writev_buffer() writes in a loop, using g_poll() to block. If
g_poll() fails, it tries to write more before the file descriptor is
ready. In theory, this could go into a tight loop. In practice,
errors other than EINTR are really unlikely, and when they happen,
we're probably screwed anyway, so we can just as well loop.
Clean it up a bit: retry poll on EINTR, keep ignoring other errors.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Since commit 8561c9244d "exec: allocate PROT_NONE pages on top of
RAM", it is no longer possible to back guest RAM with hugepages on ppc64
hosts:
mmap(NULL, 285212672, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0x3fff57000000
mmap(0x3fff57000000, 268435456, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED, 19, 0) = -1 EBUSY (Device or resource busy)
This is because on ppc64, Linux fixes a page size for a virtual address
at mmap time, so we can't switch a range of memory from anonymous
small pages to hugetlbs with MAP_FIXED.
See commit d0f13e3c20b6fb73ccb467bdca97fa7cf5a574cd
("[POWERPC] Introduce address space "slices"") in Linux
history for the details.
Detect this and create the PROT_NONE mapping using the same fd.
Naturally, this makes the guard page bigger with hugetlbfs.
Based on patch by Greg Kurz.
Acked-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In 1811e64 'hw/virtio: Add PCIe capability to virtio devices', the
QEMU_PCI_CAP_EXPRESS capability was added to virtio's pci_dev, within
'virtio_pci_realize' - the pci device object realization method.
This occurs to late, as 'pci_qdev_realize' (DeviceClass.realize of
TYPE_PCI_DEVICE) has already been called, without knowing that the
device instance is indeed an "express" instance, thus allocating
insufficient pci config space.
As a result, device may crash upon attempt to write to the PCIE config
space.
Fix, by arming the QEMU_PCI_CAP_EXPRESS capability early in virtio-pci's
own DeviceClass realize method.
This also makes code cleaner, as 'virtio_pci_realize' may now access the
'pci_is_express' predicate when needed.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
If you run a qemu advertising VERSION_1 with an old kernel where
vhost did not yet support VERSION_1, you'll end up with a device
that is {modern pci|ccw revision 1} but does not advertise VERSION_1.
This is not a sensible configuration and is rejected by the Linux
guest drivers.
To fix this, add a ->post_plugged() callback invoked after features
have been queried that can handle the VERSION_1 bit being withdrawn
and change ccw to fall back to revision 0 if VERSION_1 is gone.
Note that pci is _not_ fixed; we'll need to rethink the approach
for the next release but at least for pci it's not a regression.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This fixes file descriptor leakage in vhost-user-bridge
application. Whenever a new callfd or kickfd is set, the previous
one should be explicitly closed. File descriptors used to map
guest's memory are closed immediately after mmap call.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Block layer patches
# gpg: Signature made Wed 02 Dec 2015 15:57:35 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream:
blkdebug: silence warning under qtest
qcow2: Fix potential qemu-img check crash on 32 bit hosts
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
commit 1e7398a1 ("vhost: enable vhost without without MSI-X"_
dropped the implementation of vhost_dev_query,
drop it from the header file as well.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
With dataplane, the ioeventfd events could be dispatched after
mirror_run releases the dirty bitmap, but before mirror_exit actually
does the device switch, because the iothread will still be running, and
it will cause silent data loss.
Fix this by adding a bdrv_drained_begin/end pair around the window, so
that no new external request will be handled.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
* exec.c use after free
* Xen 32-on-64 breakage
* missing EINTR
* naughty warning under qtest
# gpg: Signature made Wed 02 Dec 2015 12:13:55 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream:
translate-all: ensure host page mask is always extended with 1's
main-loop: suppress warnings under qtest
qemu-char: retry g_poll on EINTR
exec: Stop using memory after free
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
One block patch for qemu 2.5-rc3.
# gpg: Signature made Wed Dec 2 16:29:17 2015 CET using RSA key ID E838ACAD
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
* mreitz/tags/pull-block-for-kevin-2015-12-02:
blkdebug: silence warning under qtest
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix QEMU crash when -netdev type=vhost-user,queues=n is passed
with zero number of queues.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
The prepare callback needs to be implemented with glib < 2.36,
quoting glib documentation:
"Since 2.36 this may be NULL, in which case the effect is as if the
function always returns FALSE with a timeout of -1."
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
TCP port 1234 may be used by another process concurrently. Instead use a
temporary unix socket.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost-user-tests uses a helper thread to dispatch the vhost-user servers
sources. However the CharDriverState is not thread-safe. Therefore, when
it's given to the thread, it shouldn't be manipulated concurrently.
We dispatch cleaning the server in an idle source. By the end of the
test, we ensure not to leave anything behind by joining the thread and
finishing the sources dispatch.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This crash was caught with qemu-iotests test case 138.
Commit b6d36de already fixed a few 32 bit truncation bugs that could
cause qemu-img check to allocate too little memory and consequently
it would segfault. On 32 bit hosts, there is one more place that needs
to be fixed because size_t was involved in the calculation and is a
32 bit type there.
Cc: qemu-stable@nongnu.org
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Anthony reported that >4GB guests on Xen with 32bit QEMU broke after
commit 4ed023c ("Round up RAMBlock sizes to host page sizes", 2015-11-05).
In that patch sizes are masked against qemu_host_page_size/mask which
are uintptr_t, and thus 32bit on a 32bit QEMU, even though the ram space
might be bigger than 4GB on Xen.
Since ram_addr_t is not available on user-mode emulation targets, ensure
that we get a sign extension when masking away the low bits of the address.
Remove the ~10 year old scary comment that the type of these variables
is probably wrong, with another equally scary comment. The new comment
however does not have "???" in it, which is arguably an improvement.
For completeness use the alignment macros in linux-user and bsd-user
instead of manually doing an &. linux-user and bsd-user are not affected
by the Xen issue, however.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reported-by: Anthony PERARD <anthony.perard@citrix.com>
Fixes: 4ed023ce2a
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a case where pty_chr_update_read_handler_locked's lack
of error checking can produce incorrect values. We are not using
SIGUSR1 anymore, so this is quite theoretical, but easy to fix.
Reported-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
memory_region_unref(mr) can free memory.
For example I got:
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7f43280d4700 (LWP 4462)]
0x00007f43323283c0 in phys_section_destroy (mr=0x7f43259468b0)
at /home/don/xen/tools/qemu-xen-dir/exec.c:1023
1023 if (mr->subpage) {
(gdb) bt
at /home/don/xen/tools/qemu-xen-dir/exec.c:1023
at /home/don/xen/tools/qemu-xen-dir/exec.c:1034
at /home/don/xen/tools/qemu-xen-dir/exec.c:2205
(gdb) p mr
$1 = (MemoryRegion *) 0x7f43259468b0
And this change prevents this.
Signed-off-by: Don Slutz <Don.Slutz@Gmail.com>
Message-Id: <1448921464-21845-1-git-send-email-Don.Slutz@Gmail.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If there are a lot of guest memory ops in the TB, the amount of
code generated by tcg_out_tb_finalize could be well more than 1k.
In the short term, increase the reservation larger than any TB
seen in practice.
Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
When QEMU is brought to the foreground, the click event that activates QEMU
should not go to the guest. Accidents happen when they do go to the guest
without giving the user a chance to handle them. In particular, if the
guest input device is not an absolute-position one then the location of
the guest cursor (and thus the click) will likely not be the location of
the host cursor when it is clicked, and could be completely obscured
below another window. Don't send mouse clicks to QEMU unless the
window either has focus or has grabbed mouse events.
Reported-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 1448551168-13196-1-git-send-email-peter.maydell@linaro.org
Last round of s390x fixes for 2.5:
- The bios should be built for the first z machine, so that newer
instructions don't creep in.
- Silence annoying message when running make check.
- Fix a problem with the pci iommu exposed by recent changes.
# gpg: Signature made Tue 01 Dec 2015 08:59:42 GMT using RSA key ID C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
* remotes/cohuck/tags/s390x-20151201:
s390x/pci: fix up IOMMU size
s390x: no deprecation warning while testing
pc-bios/s390-ccw: rebuild image
pc-bios/s390-ccw: build for z900
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Present code uses @size==UINT64_MAX to initialize IOMMU. It infers that it
can map any 64-bit IOVA whatsoever. But in fact, the largest DMA range for
each PCI Device on s390x is from ZPCI_SDMA_ADDR to ZPCI_EDMA_ADDR. The largest
value is returned from hardware, which is to indicate the largest range
hardware can support. But the real IOMMU size for specific PCI Device is
obtained once qemu intercepts mpcifc instruction that guest is requesting a
DMA range for that PCI Device. Therefore, before intercepting mpcifc instruction,
qemu cannot be aware of the size of IOMMU region that guest will use.
Moreover, iommu replay during device initialization for the whole region in
4k steps takes a very long time.
In conclusion, this patch intializes IOMMU region for each PCI Device when
intercept mpcifc instruction which is to register DMA range for the PCI Device.
And then, destroy IOMMU region when guest wants to deregister IOAT.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
'make check' tries to start all available machines; the deprecation
message for the s390-virtio machine is both useless and annoying
there. Silence it while testing.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Newer distributions have an architecture level set to z9, z196
or similar - also as default option for the compiler.
We should build the bios for z900 to allow it to run with
all 64bit CPUs. This will become more important as soon as
QEMU/KVM does support CPU models.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-By: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Two fixes for virtfs/9p from Paolo.
# gpg: Signature made Mon 30 Nov 2015 14:10:47 GMT using DSA key ID 0101DBC2
# gpg: Good signature from "Greg Kurz <gkurz@fr.ibm.com>"
# gpg: aka "Greg Kurz <groug@free.fr>"
# gpg: aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg: aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg: aka "Gregory Kurz (Cimai Technology) <gkurz@cimai.com>"
# gpg: aka "Gregory Kurz (Meiosys Technology) <gkurz@meiosys.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2
* remotes/gkurz/tags/for-upstream:
virtio-9p: use QEMU thread pool
fsdev-proxy-helper: avoid TOC/TOU race
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ppc patch queue for qemu-2.5 20151130
target-ppc and related bugfix patches for qemu-2.5
I don't have the facilities to test the Macintosh and BookE related
patches. I've sanity checked them (inspection + make check), but I'm
otherwise relying on the submitters.
# gpg: Signature made Mon 30 Nov 2015 08:42:01 GMT using RSA key ID 20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.5-20151130:
target-ppc/fpu_helper: fix FPSCR_FX bit shift operation
target-ppc: Move the FPSCR bit update macros to cpu.h
hw/ppc/ppc405_boards: Fix infinite recursion by converting taihu_cpld from old_mmio
hw/ppc/spapr: Remove duplicated "pseries" alias
mac_dbdma: always initialize channel field in DBDMA_channel
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
wxx patch queue
# gpg: Signature made Mon 30 Nov 2015 05:48:33 GMT using RSA key ID 677450AD
# gpg: Good signature from "Stefan Weil <sw@weilnetz.de>"
# gpg: aka "Stefan Weil <stefan.weil@weilnetz.de>"
# gpg: aka "Stefan Weil <stefan.weil@bib.uni-mannheim.de>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 4923 6FEA 75C9 5D69 8EC2 B78A E08C 21D5 6774 50AD
* remotes/weil/tags/pull-wxx-20151130:
w32: Use gcc option -mthreads
oslib-win32: Change return type of function getpagesize
trace/simple: Fix warning and wrong trace file name for MinGW
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The QEMU thread pool already has a mechanism to invoke callbacks in the main
thread. It does not need an EventNotifier and it is more efficient too.
Use it instead of GAsyncQueue + GThreadPool + glue.
As a side effect, it silences Coverity's complaint about an unchecked
return value for event_notifier_init.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
(removed no more needed #include <glib.h> from virtio-9p-coth.h)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
There is a minor time of check/time of use race between statfs and chroot.
It can be fixed easily by stat-ing the root after it has been changed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Currently in TCG mode, updating floating exception
summary bit (FPSCR_FX) in fpscr also updates
the upper 32bits of fpscr with all 1s.
Modify the bit shift operation statement to use
1ULL instead.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Move the FPSCR bit update macros defined in dfp_helper
to cpu.h. This way, fpu_helper functions can also use them
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The taihu_cpld_writel() function had an obvious typo that meant that
if it was ever called it would go into an infinite recursion. Newer
versions of clang will detect and warn about this:
hw/ppc/ppc405_boards.c:481:1: warning: all paths through this function will call itself [-Winfinite-recursion]
Fix this by converting taihu_cpld from the legacy old_mmio accessors
to new-style ones, with an impl {} declaration to cause the core
memory code to do the splitting of 16 bit and 32 bit accesses into
multiple 8-bit accesses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The "pseries" alias is currently set twice, one time for the
pseries-2.4 machine and one time for the "pseries-2.5" machine.
To avoid confusion with the alias, let's remove the one from
the older machine class. And while we're at it, also remove
the "is_default = 0" there since the is_default variable
should be set to zero by default already.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
dbdma_from_ch() uses channel field to return the right DBDMA object.
Previous code was working if guest OS was only using registered DMA channels.
However, it lead to QEMU crashes if guest OS was using unregistered DMA channels.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU uses threads / coroutines, therefore support for thread local storage
and thread safe libraries (-D_MT) must be enabled by using -mthreads.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
getpagesize on Linux returns an int. Fix QEMU's implementation for
Windows to return an int (instead of size_t), too.
This fixes a compiler warning which was introduced recently
(commit 093e3c42).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
On Windows, getpid() always returns an int value, but pid_t (which is
expected by the format string) is either a 32 bit or a 64 bit value.
Without a type cast (or a modified format string), the compiler prints
a warning when building for 64 bit Windows and the resulting trace_file_name
will include a wrong pid:
trace/simple.c:332:9: warning:
format ‘%lld’ expects argument of type ‘long long int’,
but argument 2 has type ‘int’ [-Wformat=]
Signed-off-by: Stefan Weil <sw@weilnetz.de>
# gpg: Signature made Fri 27 Nov 2015 02:42:02 GMT using RSA key ID 398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
tap-win32: disable broken async write path
tap-win32: skip unexpected nodes during registry enumeration
eepro100: Prevent two endless loops
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The code under the TUN_ASYNCHRONOUS_WRITES path makes two incorrect
assumptions about the behaviour of the WriteFile API for overlapped
file handles. First, WriteFile does not update the
lpNumberOfBytesWritten parameter when the write completes
asynchronously (the number of bytes written is known only when the
operation completes). Second, the buffer shouldn't be touched (or
freed) until the operation completes. This led to at least one bug
where tap_win32_write returned zero bytes written, which in turn
caused further writes ("receives") to be disabled for that device.
This change disables the asynchronous write path, while keeping most
of the code around in case someone sees value in resurrecting it. It
also adds some conditional debug output, similar to the read path.
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Acked-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
In order to find a named tap device, get_device_guid() enumerates children of
HKLM\SYSTEM\CCS\Control\Network\{4D36E972-E325-11CE-BFC1-08002BE10318}
(aka NETWORK_CONNECTIONS_KEY). For each child, it then looks for a
"Connection" subkey, but if this key doesn't exist, it aborts the
entire search. This was observed to fail on at least one Windows 10
machine, where there is an additional child of NETWORK_CONNECTIONS_KEY
(named "Descriptions"). Since registry enumeration doesn't guarantee
any particular sort order, we should continue to search for matching
children rather than aborting the search.
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
msgstr"- Appuyer sur Ctrl+Alt+G pour arrêter la capture"
#: ui/gtk.c:264
#: ui/gtk.c:275
msgid" [Paused]"
msgstr"[En pause]"
#: ui/gtk.c:1688
#: ui/gtk.c:1783
msgid"_Pause"
msgstr"_Pause"
#: ui/gtk.c:1694
#: ui/gtk.c:1789
msgid"_Reset"
msgstr"_Réinitialiser"
#: ui/gtk.c:1697
#: ui/gtk.c:1792
msgid"Power _Down"
msgstr"_Éteindre"
#: ui/gtk.c:1703
#: ui/gtk.c:1798
msgid"_Quit"
msgstr"_Quitter"
#: ui/gtk.c:1787
#: ui/gtk.c:1890
msgid"_Fullscreen"
msgstr"Mode _plein écran"
#: ui/gtk.c:1801
#: ui/gtk.c:1904
msgid"Zoom _In"
msgstr"Zoom _avant"
#: ui/gtk.c:1808
#: ui/gtk.c:1911
msgid"Zoom _Out"
msgstr"_Zoom arrière"
#: ui/gtk.c:1815
#: ui/gtk.c:1918
msgid"Best _Fit"
msgstr"Zoom _idéal"
#: ui/gtk.c:1822
#: ui/gtk.c:1925
msgid"Zoom To _Fit"
msgstr"Zoomer pour a_juster"
#: ui/gtk.c:1828
#: ui/gtk.c:1931
msgid"Grab On _Hover"
msgstr"Capturer en _survolant"
#: ui/gtk.c:1831
#: ui/gtk.c:1934
msgid"_Grab Input"
msgstr"_Capturer les entrées"
#: ui/gtk.c:1860
#: ui/gtk.c:1963
msgid"Show _Tabs"
msgstr"Montrer les _onglets"
#: ui/gtk.c:1863
#: ui/gtk.c:1966
msgid"Detach Tab"
msgstr"_Détacher l'onglet"
#: ui/gtk.c:1875
#: ui/gtk.c:1978
msgid"_Machine"
msgstr"_Machine"
#: ui/gtk.c:1880
#: ui/gtk.c:1983
msgid"_View"
msgstr"_Vue"
Loaded 100 of 149 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.