Compare commits

...
236 Commits
Author SHA1 Message Date
Michael Roth db51dfc1fc Update version for 2.5.1.1 release
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com
2016-05-09 11:55:58 -05:00
Michael S. Tsirkin 5b7236f725 cadence_uart: bounds check write offset
cadence_uart_init() initializes an I/O memory region of size 0x1000
bytes.  However in uart_write(), the 'offset' parameter (offset within
region) is divided by 4 and then used to index the array 'r' of size
CADENCE_UART_R_MAX which is much smaller: (0x48/4).  If 'offset>>=2'
exceeds CADENCE_UART_R_MAX, this will cause an out-of-bounds memory
write where the offset and the value are controlled by guest.

This will corrupt QEMU memory, in most situations this causes the vm to
crash.

Fix by checking the offset against the array size.

Cc: qemu-stable@nongnu.org
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20160418100735.GA517@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 5eb0b194e9)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-05-09 11:55:58 -05:00
Gerd Hoffmann 0bcdb632f8 Revert "ehci: make idt processing more robust"
This reverts commit 156a2e4dbf.

Breaks FreeBSD.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit a49923d283)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-05-08 22:37:18 -05:00
Gerd Hoffmann 706bab670b ehci: apply limit to iTD/sidt descriptors
Commit "156a2e4 ehci: make idt processing more robust" tries to avoid a
DoS by the guest (create a circular iTD queue and let qemu ehci
emulation run in circles forever).  Unfortunately this has two problems:
First it misses the case of siTDs, and second it reportedly breaks
FreeBSD.

So lets go for a different approach: just count the number of iTDs and
siTDs we have seen per frame and apply a limit.  That should really
catch all cases now.

Reported-by: 杜少博 <dushaobo@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 1ae3f2f178)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-05-08 22:37:09 -05:00
Gerd Hoffmann 44b86aa32e vga: make sure vga register setup for vbe stays intact (CVE-2016-3712).
Call vbe_update_vgaregs() when the guest touches GFX, SEQ or CRT
registers, to make sure the vga registers will always have the
values needed by vbe mode.  This makes sure the sanity checks
applied by vbe_fixup_regs() are effective.

Without this guests can muck with shift_control, can turn on planar
vga modes or text mode emulation while VBE is active, making qemu
take code paths meant for CGA compatibility, but with the very
large display widths and heigts settable using VBE registers.

Which is good for one or another buffer overflow.  Not that
critical as they typically read overflows happening somewhere
in the display code.  So guests can DoS by crashing qemu with a
segfault, but it is probably not possible to break out of the VM.

Fixes: CVE-2016-3712
Reported-by: Zuozhi Fzz <zuozhi.fzz@alibaba-inc.com>
Reported-by: P J P <ppandit@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-05-08 20:56:43 -05:00
Gerd Hoffmann a6e5e5dd4b vga: update vga register setup on vbe changes
Call the new vbe_update_vgaregs() function on vbe configuration
changes, to make sure vga registers are up-to-date.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-05-08 20:56:40 -05:00
Gerd Hoffmann 2f2f74e87c vga: factor out vga register setup
When enabling vbe mode qemu will setup a bunch of vga registers to make
sure the vga emulation operates in correct mode for a linear
framebuffer.  Move that code to a separate function so we can call it
from other places too.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-05-08 20:56:38 -05:00
Gerd Hoffmann 46aff2c7e9 vga: add vbe_enabled() helper
Makes code a bit easier to read.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-05-08 20:56:34 -05:00
Gerd Hoffmann 4f0323d26c vga: fix banked access bounds checking (CVE-2016-3710)
vga allows banked access to video memory using the window at 0xa00000
and it supports a different access modes with different address
calculations.

The VBE bochs extentions support banked access too, using the
VBE_DISPI_INDEX_BANK register.  The code tries to take the different
address calculations into account and applies different limits to
VBE_DISPI_INDEX_BANK depending on the current access mode.

Which is probably effective in stopping misprogramming by accident.
But from a security point of view completely useless as an attacker
can easily change access modes after setting the bank register.

Drop the bogus check, add range checks to vga_mem_{readb,writeb}
instead.

Fixes: CVE-2016-3710
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-05-08 20:56:30 -05:00
Michael Roth a58047f7fb Update version for 2.5.1 release
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-29 15:47:56 -05:00
Denis V. Lunev 5f409b108f hyperv: cpu hotplug fix with HyperV enabled
With Hyper-V enabled CPU hotplug stops working. The CPU appears
in device manager on Windows but does not appear in peformance
monitor and control panel.

The root of the problem is the following. Windows checks
HV_X64_CPU_DYNAMIC_PARTITIONING_AVAILABLE bit in CPUID. The
presence of this bit is enough to cure the situation.

The bit should be set when CPU hotplug is allowed for HyperV VM.
The check that hot_add_cpu callback is defined is enough from the
protocol point of view. Though this callback is defined almost
always thus there is no need to export that knowledge in the
other way.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Andreas Färber" <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
(cherry picked from commit 4467c6c118)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-22 18:02:30 -05:00
Fam Zheng 078de11898 vmdk: Fix converting to streamOptimized
Commit d62d9dc4b8 lifted streamOptimized images's version to 3, but we
now refuse to open version 3 images read-write.  We need to make
streamOptimized an exception to allow converting to it. This fixes the
accidentally broken iotests case 059 for the same reason.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
(cherry picked from commit 3db1d98a20)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-22 17:41:10 -05:00
Fam Zheng acea76c162 vmdk: Create streamOptimized as version 3
VMware products accept only version 3 for streamOptimized, let's bump
the version.

Reported-by: Radoslav Gerganov <rgerganov@vmware.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit d62d9dc4b8)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-22 17:41:04 -05:00
Prasad J Pandit 80b6e5723f usb: check USB configuration descriptor object
When processing remote NDIS control message packets, the USB Net
device emulator checks to see if the USB configuration descriptor
object is of RNDIS type(2). But it does not check if it is null,
which leads to a null dereference error. Add check to avoid it.

Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 1455188480-14688-1-git-send-email-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 80eecda8e5)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-22 17:40:56 -05:00
Prasad J Pandit 9bddb45dbc usb: check RNDIS message length
When processing remote NDIS control message packets, the USB Net
device emulator uses a fixed length(4096) data buffer. The incoming
packet length could exceed this limit. Add a check to avoid it.

Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 1455648821-17340-2-git-send-email-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 64c9bc181f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-22 17:40:52 -05:00
Prasad J Pandit e3a2cdfcb5 usb: check RNDIS buffer offsets & length
When processing remote NDIS control message packets,
the USB Net device emulator uses a fixed length(4096) data buffer.
The incoming informationBufferOffset & Length combination could
overflow and cross that range. Check control message buffer
offsets and length to avoid it.

Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 1455648821-17340-3-git-send-email-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit fe3c546c5f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-22 17:40:46 -05:00
Prasad J Pandit 4dcd2f13b1 usb: check page select value while processing iTD
While processing isochronous transfer descriptors(iTD), the page
select(PG) field value could lead to an OOB read access. Add
check to avoid it.

Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 1453233406-12165-1-git-send-email-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 49d925ce50)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-22 17:40:40 -05:00
Prasad J Pandit 38e09211b6 net: ne2000: fix bounds check in ioport operations
While doing ioport r/w operations, ne2000 device emulation suffers
from OOB r/w errors. Update respective array bounds check to avoid
OOB access.

Reported-by: Ling Liu <liuling-it@360.cn>
Cc: qemu-stable@nongnu.org
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit aa7f9966df)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-22 17:40:34 -05:00
Prasad J Pandit d0ee85b4e4 net: check packet payload length
While computing IP checksum, 'net_checksum_calculate' reads
payload length from the packet. It could exceed the given 'data'
buffer size. Add a check to avoid it.

Reported-by: Liu Ling <liuling-it@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 362786f14a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-22 17:40:27 -05:00
Prasad J Pandit 4f046a6ba1 ide: ahci: reset ncq object to unused on error
When processing NCQ commands, AHCI device emulation prepares a
NCQ transfer object; To which an aio control block(aiocb) object
is assigned in 'execute_ncq_command'. In case, when the NCQ
command is invalid, the 'aiocb' object is not assigned, and NCQ
transfer object is left as 'used'. This leads to a use after
free kind of error in 'bdrv_aio_cancel_async' via 'ahci_reset_port'.
Reset NCQ transfer object to 'unused' to avoid it.

[Maintainer edit: s/ACHI/AHCI/ in the commit message. --js]

Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1452282511-4116-1-git-send-email-ppandit@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
(cherry picked from commit 4ab0359a8a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-22 17:40:20 -05:00
P J P b47809c6b3 i386: avoid null pointer dereference
Hello,

A null pointer dereference issue was reported by Mr Ling Liu, CC'd here. It
occurs while doing I/O port write operations via hmp interface. In that,
'current_cpu' remains null as it is not called from cpu_exec loop, which
results in the said issue.

Below is a proposed (tested)patch to fix this issue; Does it look okay?

===
From ae88a4947fab9a148cd794f8ad2d812e7f5a1d0f Mon Sep 17 00:00:00 2001
From: Prasad J Pandit <pjp@fedoraproject.org>
Date: Fri, 18 Dec 2015 11:16:07 +0530
Subject: [PATCH] i386: avoid null pointer dereference

When I/O port write operation is called from hmp interface,
'current_cpu' remains null, as it is not called from cpu_exec()
loop. This leads to a null pointer dereference in vapic_write
routine. Add check to avoid it.

Reported-by: Ling Liu <liuling-it@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <alpine.LFD.2.20.1512181129320.9805@wniryva>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: P J P <ppandit@redhat.com>
(cherry picked from commit 4c1396cb57)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-22 17:39:27 -05:00
Wolfgang Bumiller 24fe899c3c hmp: fix sendkey out of bounds write (CVE-2015-8619)
When processing 'sendkey' command, hmp_sendkey routine null
terminates the 'keyname_buf' array. This results in an OOB
write issue, if 'keyname_len' was to fall outside of
'keyname_buf' array.

Since the keyname's length is known the keyname_buf can be
removed altogether by adding a length parameter to
index_from_key() and using it for the error output as well.

Reported-by: Ling Liu <liuling-it@360.cn>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Message-Id: <20160113080958.GA18934@olga>
[Comparison with "<" dumbed down, test for junk after strtoul()
tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>

(cherry picked from commit 64ffbe04ea)

Conflicts:
	hmp.c

*removed dependency on 7fb1cf16

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-22 17:38:16 -05:00
John Snow aaf4fb6afb ahci: Do not unmap NULL addresses
Definitely don't try to unmap a garbage address.

Reported-by: Zuozhi fzz <zuozhi.fzz@alibaba-inc.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1454103689-13042-2-git-send-email-jsnow@redhat.com
(cherry picked from commit 99b4cb7106)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-22 17:35:36 -05:00
Greg Kurz a2ae168821 migration: allow machine to enforce configuration section migration
Migration of pseries-2.3 doesn't have configuration section. Unfortunately,
QEMU 2.4/2.4.1/2.5 are buggy and always stream and expect the configuration
section, and break migration both ways.

This patch introduces a property which allows to enforce a configuration
section for machines who don't have one.

It can be set at startup:

-machine enforce-config-section=on

or later from the QEMU monitor:

qom-set /machine enforce-config-section on

It is up to the tooling to set or unset this property according to the
version of the QEMU at the other end of the pipe.

Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
(cherry picked from commit 902c053d83)

Conflicts:
	qemu-options.hx

* removed context dependency on 87252e1b
* added to provide 2.5<->2.5.1 migration compat option for
  pseries-2.3 machines

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-22 17:20:12 -05:00
Marcel Apfelbaum bad094d524 vl.c: Fix regression in machine error message
Commit e1ce0c3cb (vl.c: fix regression when reading machine type
from config file) fixed the error message when the machine type
was supplied inside the config file. However now the option name
is not displayed correctly if the error happens when the machine
is specified at command line.

Running
    ./x86_64-softmmu/qemu-system-x86_64 -M q35-1.5 -redir tcp:8022::22
will result in the error message:
    qemu-system-x86_64: -redir tcp:8022::22: unsupported machine type
    Use -machine help to list supported machines

Fixed it by restoring the error location and also extracted the code
dealing with machine options into a separate function.

Reported-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1455303747-19776-2-git-send-email-ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
(cherry picked from commit 34f405ae6d)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-17 18:21:32 -05:00
Alberto Garcia 4b0b1ec8e0 quorum: Fix crash in quorum_aio_cb()
quorum_aio_cb() emits the QUORUM_REPORT_BAD event if there's
an I/O error in a Quorum child. However sacb->aiocb must be
correctly initialized for this to happen. read_quorum_children() and
read_fifo_child() are not doing this, which results in a QEMU crash.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 8138570d071ba7e25db3736979234a1fd71dbd05.1457610443.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
(cherry picked from commit b9c600d207)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-17 18:18:19 -05:00
Peter Maydell cab1cc7245 target-arm: Make reserved ranges in ID_AA64* spaces RAZ, not UNDEF
The v8 ARM ARM defines that unused spaces in the ID_AA64* system
register ranges are Reserved and must RAZ, rather than being UNDEF.
Implement this.

In particular, ARM v8.2 adds a new feature register ID_AA64MMFR2,
and newer versions of the Linux kernel will attempt to read this,
which causes them not to boot up on versions of QEMU missing this fix.

Since the encoding .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 6
is actually defined in ARMv8 (as ID_MMFR4), we give it an entry in
the ARMCPU struct so CPUs can override it, though since none do
this too will just RAZ.

Cc: qemu-stable@nongnu.org
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1455890863-11203-1-git-send-email-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
(cherry picked from commit e20d84c140)

Conflicts:
	target-arm/helper.c

* remove context dep on 4054bfa9

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-17 17:48:45 -05:00
Michael S. Tsirkin 9ae02175b4 vhost-user: don't merge regions with different fds
vhost currently merges regions with contiguious virtual and physical
addresses.  This breaks for vhost-user since that also needs fds to
match.

Add a vhost_ops entry to compare the fds for vhost-user only.

Cc: qemu-stable@nongnu.org
Cc: Victor Kaplansky <victork@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit ffe42cc14c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-17 17:36:07 -05:00
Laszlo Ersek 30929793b0 fw_cfg: unbreak migration compatibility for 2.4 and earlier machines
When I reviewed Marc's fw_cfg DMA patches, I completely missed that the
way we set dma_enabled would break migration.

Gerd explained the right way (see reference below): dma_enabled should be
set to true by default, and only true->false transitions should be
possible:

- when the user requests that with

    -global fw_cfg_mem.dma_enabled=off

  or

   -global fw_cfg_io.dma_enabled=off

  as appropriate for the platform,

- when HW_COMPAT_2_4 dictates it,

- when board code initializes fw_cfg without requesting DMA support.

Cc: Marc Marí <markmb@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Alexandre DERUMIER <aderumier@odiso.com>
Cc: qemu-stable@nongnu.org
Ref: http://thread.gmane.org/gmane.comp.emulators.qemu/390272/focus=391042
Ref: https://bugs.launchpad.net/qemu/+bug/1536487
Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1455823860-22268-1-git-send-email-lersek@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit e6915b5f3a)

Conflicts:
	include/hw/compat.h

* remove cosmetic dep on c9c0afbb

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-17 17:33:59 -05:00
Marcel Apfelbaum c5c9841ce8 hw/virtio: group virtio flags into an enum
Minimizes the possibility to assign
the same bit to different features.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit fc1769b758)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-17 17:25:13 -05:00
Marcel Apfelbaum 6b62303eb8 hw/virtio: fix double use of a virtio flag
Commits 1811e64c and a6df8adf use the same virtio feature bit 4
for different features.

Fix it by using different bits.

Reported-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 631a438755)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-17 17:24:57 -05:00
Greg Kurz c06f342009 spapr: skip configuration section during migration of older machines
Since QEMU 2.4, we have a configuration section in the migration stream.
This must be skipped for older machines, like it is already done for x86.

This patch fixes the migration of pseries-2.3 from/to QEMU 2.3, but it
breaks migration of the same machine from/to QEMU 2.4/2.4.1/2.5. We do
that anyway because QEMU 2.3 is likely to be more widely deployed than
newer QEMU versions.

Fixes: 61964c23e5
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
(cherry picked from commit 09b5e30da5)

Conflicts:
	hw/ppc/spapr.c

*remove dep on 5013c5474

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-17 17:17:33 -05:00
Laszlo Ersek cb873eaa6d e1000: eliminate infinite loops on out-of-bounds transfer start
The start_xmit() and e1000_receive_iov() functions implement DMA transfers
iterating over a set of descriptors that the guest's e1000 driver
prepares:

- the TDLEN and RDLEN registers store the total size of the descriptor
  area,

- while the TDH and RDH registers store the offset (in whole tx / rx
  descriptors) into the area where the transfer is supposed to start.

Each time a descriptor is processed, the TDH and RDH register is bumped
(as appropriate for the transfer direction).

QEMU already contains logic to deal with bogus transfers submitted by the
guest:

- Normally, the transmit case wants to increase TDH from its initial value
  to TDT. (TDT is allowed to be numerically smaller than the initial TDH
  value; wrapping at or above TDLEN bytes to zero is normal.) The failsafe
  that QEMU currently has here is a check against reaching the original
  TDH value again -- a complete wraparound, which should never happen.

- In the receive case RDH is increased from its initial value until
  "total_size" bytes have been received; preferably in a single step, or
  in "s->rxbuf_size" byte steps, if the latter is smaller. However, null
  RX descriptors are skipped without receiving data, while RDH is
  incremented just the same. QEMU tries to prevent an infinite loop
  (processing only null RX descriptors) by detecting whether RDH assumes
  its original value during the loop. (Again, wrapping from RDLEN to 0 is
  normal.)

What both directions miss is that the guest could program TDLEN and RDLEN
so low, and the initial TDH and RDH so high, that these registers will
immediately be truncated to zero, and then never reassume their initial
values in the loop -- a full wraparound will never occur.

The condition that expresses this is:

  xdh_start >= s->mac_reg[XDLEN] / sizeof(desc)

i.e., TDH or RDH start out after the last whole rx or tx descriptor that
fits into the TDLEN or RDLEN sized area.

This condition could be checked before we enter the loops, but
pci_dma_read() / pci_dma_write() knows how to fill in buffers safely for
bogus DMA addresses, so we just extend the existing failsafes with the
above condition.

This is CVE-2016-1981.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Petr Matousek <pmatouse@redhat.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Prasad Pandit <ppandit@redhat.com>
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: qemu-stable@nongnu.org
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1296044
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit dd793a7488)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-17 16:55:27 -05:00
Jeff Cody 4853a5a80f block: qemu-iotests - add test for snapshot, commit, snapshot bug
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 2dbc05efba2f683cb3aaf71aaa9b776ebf7ec57c.1454376655.git.jcody@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
[Moved test number from 143 to 144]
Signed-off-by: Max Reitz <mreitz@redhat.com>

(cherry picked from commit 8983b670f6)

Conflicts:
	tests/qemu-iotests/group

*removed context dependencies on newer test groups

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-17 16:53:35 -05:00
Jeff Cody a375e0b03e block: set device_list.tqe_prev to NULL on BDS removal
This fixes a regression introduced with commit 3f09bfbc7.  Multiple
bugs arise in conjunction with live snapshots and mirroring operations
(which include active layer commit).

After a live snapshot occurs, the active layer and the base layer both
have a non-NULL tqe_prev field in the device_list, although the base
node's tqe_prev field points to a NULL entry.  This non-NULL tqe_prev
field occurs after the bdrv_append() in the external snapshot calls
change_parent_backing_link().

In change_parent_backing_link(), when the previous active layer is
removed from device_list, the device_list.tqe_prev pointer is not
set to NULL.

The operating scheme in the block layer is to indicate that a BDS belongs
in the bdrv_states device_list iff the device_list.tqe_prev pointer
is non-NULL.

This patch does two things:

1.) Introduces a new block layer helper bdrv_device_remove() to remove a
    BDS from the device_list, and
2.) uses that new API, which also fixes the regression once used in
    change_parent_backing_link().

Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 0cd51e11c0666c04ddb7c05293fe94afeb551e89.1454376655.git.jcody@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
(cherry picked from commit f8aa905a4f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-17 16:51:48 -05:00
Eric Blake a38a283fc7 qmp: Fix reference-counting of qnull on empty output visit
Commit 6c2f9a15 ensured that we would not return NULL when the
caller used an output visitor but had nothing to visit. But
in doing so, it added a FIXME about a reference count leak
that could abort qemu in the (unlikely) case of SIZE_MAX such
visits (more plausible on 32-bit).  (Although that commit
suggested we might fix it in time for 2.5, we ran out of time;
fortunately, it is unlikely enough to bite that it was not
worth worrying about during the 2.5 release.)

This fixes things by documenting the internal contracts, and
explaining why the internal function can return NULL and only
the public facing interface needs to worry about qnull(),
thus avoiding over-referencing the qnull_ global object.

It does not, however, fix the stupidity of the stack mixing
up two separate pieces of information; add a FIXME to explain
that issue, which will be fixed shortly in a future patch.

Signed-off-by: Eric Blake <eblake@redhat.com>
Cc: qemu-stable@nongnu.org
Message-Id: <1454075341-13658-25-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
(cherry picked from commit a861564015)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-17 16:50:34 -05:00
Dr. David Alan Gilbert 225d50fbb1 cpus: use broadcast on qemu_pause_cond
Jiri saw a hang on pause_all_vcpus called from postcopy_start,
where the cpus are all apparently stopped ('stopped' flag set)
but pause_all_vcpus is still stuck on a cond_wait on qemu_paused_cond.
We suspect this is happening if a qmp_stop is called at about the
same time as the postcopy code calls that pause_all_vcpus;
although they both should have the main lock held, Paolo spotted
the cond_wait unlocks the global lock so perhaps they both
could end up waiting at the same time?

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reported-by: Jiri Denemark <jdenemar@redhat.com>
Message-Id: <1453716498-27238-1-git-send-email-dgilbert@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 96bce6831b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-17 16:47:04 -05:00
Gabriel L. Somlo 020282d3e6 fw_cfg: avoid calculating invalid current entry pointer
When calculating a pointer to the currently selected fw_cfg item, the
following is used:

  FWCfgEntry *e = &s->entries[arch][s->cur_entry & FW_CFG_ENTRY_MASK];

When s->cur_entry is FW_CFG_INVALID, we are calculating the address of
a non-existent element in s->entries[arch][...], which is undefined.

This patch ensures the resulting entry pointer is set to NULL whenever
s->cur_entry is FW_CFG_INVALID.

Reported-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Message-id: 1446733972-1602-5-git-send-email-somlo@cmu.edu
Cc: Marc Marí <markmb@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 66f8fd9dda)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-17 16:45:24 -05:00
Halil Pasic 091af18104 s390x/css: fix control flags during csch
From the beginning, css support contained an error in csch handling:
instead of setting the clear bit in the function control bits twice, we
need to set the clear pending bit in the activity control bits. Let's
fix this.

Cc: qemu-stable@nongnu.org
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
(cherry picked from commit 4c6bf79a22)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-17 16:42:26 -05:00
Pierre Morel d98392379a s390x/ioinst: set type and len for SEI response
If no event information is pending, the return code
is set to 0x0005 and the length of the response is
set to 8 bytes.

Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Song Shan Gong <gongss@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
(cherry picked from commit f70202be53)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-17 16:42:13 -05:00
Christian Borntraeger 643c8d8ec1 block/raw-posix: avoid bogus fixup for cylinders on DASD disks
large volume DASD that have > 64k cylinders do claim to have
0xFFFE cylinders as special value in the old 16 bit field. We
want to pass this "token" along to the guest, instead of
calculating the real number. Otherwise qemu might fail with
"cyls must be between 1 and 65535"

Cc: qemu-stable@nongnu.org
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 972b543c6b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-17 16:41:43 -05:00
Gerd Hoffmann 3ede27db32 ehci: update irq on reset
After clearing the status register we also have to update the irq line
status.  Otherwise a irq which happends to be pending at reset time
causes a interrupt storm.  And the guest can't stop as the status
register doesn't indicate any pending interrupt.

Both NetBSD and FreeBSD hang on shutdown because of that.

Cc: qemu-stable@nongnu.org
Reported-by: Andrey Korolyov <andrey@xdel.ru>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1453203884-4125-1-git-send-email-kraxel@redhat.com
(cherry picked from commit 5a8660741a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-17 16:41:14 -05:00
Laurent Vivier 9849b1912f net: set endianness on all backend devices
commit 5be7d9f1b1
       vhost-net: tell tap backend about the vnet endianness

makes vhost net to set the endianness of the device, but only for
the first device.

In case of multiqueue, we have multiple devices... This patch sets the
endianness for all the devices of the interface.

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit a407644079)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-17 16:36:19 -05:00
Prasad J Pandit fe90bdc25b net: ne2000: check ring buffer control registers
Ne2000 NIC uses ring buffer of NE2000_MEM_SIZE(49152)
bytes to process network packets. Registers PSTART & PSTOP
define ring buffer size & location. Setting these registers
to invalid values could lead to infinite loop or OOB r/w
access issues. Add check to avoid it.

Reported-by: Yang Hongke <yanghongke@huawei.com>
Tested-by: Yang Hongke <yanghongke@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 415ab35a44)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-17 16:34:56 -05:00
Li Zhijian aaa5271327 net/filter: fix nf->netdev_id leak
Cc: Jason Wang <jasowang@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 671f66f87f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-17 16:34:23 -05:00
Li Zhijian abda95cb01 net/dump: fix nfds->filename leak
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit b50c7d452f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-17 16:34:15 -05:00
Max Reitz 6a49a71cc6 blockdev: Fix 'change' for slot devices
'change' and related operations did not work when used on guest devices
featuring removable media but no actual tray, because
blk_dev_is_tray_open() always returned false for them and the
blockdev-{insert,remove}-medium commands required it to return true.

Fix this by making blockdev-{insert,remove}-medium work on tray-less
devices. Also, blockdev-{open,close}-tray are now explicitly no-ops when
invoked on such devices, and blk_dev_change_media_cb() is instead
called by blockdev-{insert,remove}-medium (for tray-less devices only).

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 1454096953-31773-3-git-send-email-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 12c7ec87a7)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-17 16:23:54 -05:00
Max Reitz e1a8a09124 block: Add blk_dev_has_tray()
Pull out the check whether a block device has a tray from
blk_dev_is_tray_open() into its own function so both attributes (whether
there is a tray vs. whether that tray is open) can be queried
independently.

Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 1454096953-31773-2-git-send-email-mreitz@redhat.com
(cherry picked from commit 8f3a73bc57)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-17 16:23:28 -05:00
Prasad J Pandit 7a2c1c8e66 net: rocker: fix an incorrect array bounds check
While processing transmit(tx) descriptors in 'tx_consume' routine
the switch emulator suffers from an off-by-one error, if a
descriptor was to have more than allowed(ROCKER_TX_FRAGS_MAX=16)
fragments. Fix an incorrect bounds check to avoid it.

Reported-by: Qinghao Tang <luodalongde@gmail.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 007cd223de)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-15 12:39:32 -05:00
Marc-André Lureau 702a8d165c ivshmem: remove redundant assignment, fix crash with msi=off
Fix crash when msi=false introduced in 660c97ee (msi_vectors is NULL in
this case)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
(cherry picked from commit 47213eb110)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-15 12:35:51 -05:00
Marc-André Lureau 3e96d5dcf2 ivshmem: no need for opaque argument
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
(cherry picked from commit 2c64846972)
*context dependency for 47213eb
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-15 12:35:25 -05:00
P J P 16a2875735 scsi: initialise info object with appropriate size
While processing controller 'CTRL_GET_INFO' command, the routine
'megasas_ctrl_get_info' overflows the '&info' object size. Use its
appropriate size to null initialise it.

Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <alpine.LFD.2.20.1512211501420.22471@wniryva>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: P J P <ppandit@redhat.com>
(cherry picked from commit 36fef36b91)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-15 12:21:11 -05:00
Greg Kurz 4588b0d856 virtio-9p: use accessor to get thread_pool
The aio_context_new() function does not allocate a thread pool. This is
deferred to the first call to the aio_get_thread_pool() accessor. It is
hence forbidden to access the thread_pool field directly, as it may be
NULL. The accessor *must* be used always.

Fixes: ebac1202c9
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: qemu-stable@nongnu.org
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
(cherry picked from commit 4b3a4f2d45)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-15 12:20:55 -05:00
Stefano Stabellini ff083d3c3b xenfb: avoid reading twice the same fields from the shared page
Reading twice the same field could give the guest an attack of
opportunity. In the case of event->type, gcc could compile the switch
statement into a jump table, effectively ending up reading the type
field multiple times.

This is part of XSA-155.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
(cherry picked from commit 7ea11bf376)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-15 12:20:35 -05:00
Stefano Stabellini 4d59e78dfe xen/blkif: Avoid double access to src->nr_segments
src is stored in shared memory and src->nr_segments is dereferenced
twice at the end of the function.  If a compiler decides to compile this
into two separate memory accesses then the size limitation could be
bypassed.

Fix it by removing the double access to src->nr_segments.

This is part of XSA-155.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
(cherry picked from commit f9e98e5d7a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-15 12:20:17 -05:00
Peter Maydell 52a7b27947 configure: Fix shell syntax to placate OpenBSD's pdksh
Unfortunately the OpenBSD pdksh does not like brackets inside
the right part of a ${variable+word} parameter expansion:

  $ echo "${a+($b)}"
  ksh: ${a+($b)}": bad substitution

though both bash and dash accept them. In any case this line
was causing odd output in the case where nettle is not present:
  nettle    no ()

(because if nettle is not present then $nettle will be "no",
not a null string or unset).

Rewrite it to just use an if.

This bug was originally introduced in becaeb726 and was present
in the 2.4.0 release.

Fixes: https://bugs.launchpad.net/qemu/+bug/1525682
Reported-by: Dmitrij D. Czarkoff
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1450105357-8516-1-git-send-email-peter.maydell@linaro.org
(cherry picked from commit 18f49881cf)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-15 12:19:47 -05:00
Greg Kurz d4aed70099 target-ppc: kvm: fix floating point registers sync on little-endian hosts
On VSX capable CPUs, the 32 FP registers are mapped to the high-bits
of the 32 first VSX registers. So if you have:

VSR31 = (uint128) 0x0102030405060708090a0b0c0d0e0f00

then

FPR31 = (uint64) 0x0102030405060708

The kernel stores the VSX registers in the fp_state struct following the
host endian element ordering.

On big-endian:

fp_state.fpr[31][0] = 0x0102030405060708
fp_state.fpr[31][1] = 0x090a0b0c0d0e0f00

On little-endian:

fp_state.fpr[31][0] = 0x090a0b0c0d0e0f00
fp_state.fpr[31][1] = 0x0102030405060708

The KVM_GET_ONE_REG and KVM_SET_ONE_REG ioctls preserve this ordering, but
QEMU considers it as big-endian and always copies element [0] to the
fpr[] array and element [1] to the vsr[] array. This does not work with
little-endian hosts, and you will get:

(qemu) p $f31
0x90a0b0c0d0e0f00

instead of:

(qemu) p $f31
0x102030405060708

This patch fixes the element ordering for little-endian hosts.

Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
(cherry picked from commit 3a4b791b4c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-15 12:10:47 -05:00
P J P 42ae4a3c61 net: vmxnet3: avoid memory leakage in activate_device
Vmxnet3 device emulator does not check if the device is active
before activating it, also it did not free the transmit & receive
buffers while deactivating the device, thus resulting in memory
leakage on the host. This patch fixes both these issues to avoid
host memory leakage.

Reported-by: Qinghao Tang <luodalongde@gmail.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit aa4a3dce1c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-15 12:08:24 -05:00
Gerd Hoffmann 0d335804e3 ehci: make idt processing more robust
Make ehci_process_itd return an error in case we didn't do any actual
iso transfer because we've found no active transaction.  That'll avoid
ehci happily run in circles forever if the guest builds a loop out of
idts.

This is CVE-2015-8558.

Cc: qemu-stable@nongnu.org
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Tested-by: P J P <ppandit@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 156a2e4dbf)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-03-15 12:07:11 -05:00
Peter Maydell a8c40fa2d6 Update version for v2.5.0 release
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-16 16:10:14 +00:00
Peter Maydell f05b42d3fd Update version for v2.5.0-rc4 release
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-11 16:37:55 +00:00
Max Reitz 6e0abc251d blockdev: Mark {insert, remove}-medium experimental
While in the long term we want throttling to be its own block filter
BDS, in the short term we want it to be part of the BB instead of a BDS;
even in the long term we may want legacy throttling to be automatically
tied to the BB.

blockdev-insert-medium and blockdev-remove-medium do not retain
throttling information in the BB (deliberately so). Therefore, using
them means tying this information to a BDS, which would break the model
described above. (The same applies to other flags such as
detect_zeroes.) We probably want to move this information to the BB or
its own filter BDS before blockdev-{insert,remove}-medium can be
considered completely stable.

Therefore, mark these functions experimental for the time being.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1449847385-13986-2-git-send-email-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
[PMM: fixed format nit (underlining) in qmp-commands.hx]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-11 15:39:29 +00:00
Dr. David Alan Gilbert 3fd3c4b37c Fix xbzrle vs last_sent_block update
My fix (84e7b80a) replaced the last_sent_block update that I'd
removed earlier; however it was too aggressive in the xbzrle case.

save_xbzrle_page might return '0' to mean that the page didn't
need sending since it was the same as the last sent version;
in this case we can't update 'last_sent_block' since we didn't
actually send it.

Symptom: 'Illegal RAM offset 1018000' as we try and send a page
        to the wrong RAMBlock;  potentially that could be a data
        corruption if you were really unlucky.

Fixes: 84e7b80a05

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 1449765106-6528-1-git-send-email-dgilbert@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-11 12:51:27 +00:00
Peter Maydell b969526adf Update language files for QEMU 2.5.0
Update translation files (change created via 'make -C po update').

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1449754467-3496-1-git-send-email-peter.maydell@linaro.org
2015-12-10 13:50:45 +00:00
Alex Zuepke bd4e097a8e sparc: allow CASA with ASI 0xa from user space
LEON3 allows the CASA instruction to be used from user space
if the ASI is set to 0xa (user data).

Signed-off-by: Alex Zuepke <azu@sysgo.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-10 11:19:18 +00:00
Greg Kurz a3154ccabc MAINTAINERS: add maintainer to virtio-9p
As suggested by Paolo, I add myself as maintainer for virtio-9p.

Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Acked-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Message-id: 20151130154016.20108.79073.stgit@bahia.huguette.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-10 11:17:25 +00:00
Greg Kurz 6cecf09373 virtio-9p-device: add minimal unrealize handler
Since commit 4652f1640e "virtio-9p: add savevm
handlers", if the user hot-unplugs a quiescent 9p device and live
migrates, the source QEMU crashes before migration completetion...
This happens because virtio-9p devices have a realize handler which
calls virtio_init() and register_savevm().  Both calls store pointers
to the device internals, that get dereferenced during migration even
if the device got unplugged.

This patch simply adds an unrealize handler to perform minimal
cleanup and avoid the crash.  Hot unplug of non-quiescent 9p devices
is still not supported in QEMU, and not supported by linux guests
either.

Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20151208155457.27775.69441.stgit@bahia.huguette.org
[PMM: rewrapped long lines in commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-10 10:46:22 +00:00
Peter Maydell c3626ca7df Update version for v2.5.0-rc3 release
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-07 17:47:40 +00:00
Markus Armbruster ba306c7a55 sd: Mark brittle abuse of blk_attach_dev() FIXME
blk_attach_dev() fails here only when we're working for device
"sdhci-pci" (which already attached the backend), and then we don't
want to attach a second time.  If we ever create another failure mode,
we're setting up ourselves to using the same backend from multiple
frontends, which is likely to end in tears.  Can't clean this up this
close to the release, so mark it FIXME.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1449503710-3707-3-git-send-email-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-07 17:13:10 +00:00
Markus Armbruster 79f2170789 sdhci: Sanitize "sdhci-pci" properties for future qomification
We currently fuse controller and card into a single device model, but
we intend qomify things properly and separate the two.  The properties
that really belong to the card would then have to somehow pass-through
to the card's properties.  To avoid that complication, either mark
them experimental or drop them.

Properties "capareg", "maxcurr" and the usual PCI device properties
belong to the controller.  Property "drive" belongs to the card;
rename it to "x-drive".  Properties "logical_block_size",
"physical_block_size", "min_io_size", "opt_io_size",
"discard_granularity" belong to the card, but have no effect; drop
them.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1449503710-3707-2-git-send-email-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-07 17:13:10 +00:00
Fam Zheng a616fb75c2 virtio-blk: Drop x-data-plane option
The official way of enabling dataplane is through the "iothread"
property that references an iothread object created by "-object
iothread".  Since the old "x-data-plane=on" way now even crashes, it's
probably easier to just drop it:

$ qemu-system-x86_64 -drive file=null-co://,id=d0,if=none \
    -device virtio-blk-pci,drive=d0,x-data-plane=on

ERROR:/home/fam/work/qemu/qom/object.c:1515:
object_get_canonical_path_component: assertion failed: (obj->parent != NULL)
Aborted

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1449485967-19240-1-git-send-email-famz@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-07 16:47:16 +00:00
Peter Maydell 84942979de Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 07 Dec 2015 14:06:07 GMT using RSA key ID 398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
  lan9118: log and ignore access to invalid registers, rather than aborting
  lan9118: fix emulation of MAC address loaded bit in E2P_CMD register
  vmxnet3: silence warning
  pcnet: fix rx buffer overflow(CVE-2015-7512)
  net: pcnet: add check to validate receive data size(CVE-2015-7504)
  e1000: fix hang of win2k12 shutdown with flood ping

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-07 14:18:31 +00:00
Andrew Baumann 52b4bb7383 lan9118: log and ignore access to invalid registers, rather than aborting
With this change, access to invalid/unimplemented device registers are
logged as a "guest error" rather than aborting qemu with
hw_error. This enables drivers for similar devices (e.g. SMSC 9221),
by simply ignoring the unimplemented writes. It's also closer to what
real hardware does.

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-12-07 21:43:48 +08:00
Andrew Baumann 12fdd928c8 lan9118: fix emulation of MAC address loaded bit in E2P_CMD register
There appears to have been a longstanding typo in the implementation
of the "MAC address loaded" bit in the E2P_CMD (EEPROM command)
register. The code was using 0x10, but the controller spec says it
should be bit 8 (0x100).

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-12-07 21:43:48 +08:00
Michael S. Tsirkin 6a9c647095 vmxnet3: silence warning
vmxnet3 always produces a warning under qtest.

This is not a user error, don't warn.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-12-07 21:43:48 +08:00
Jason Wang 8b98a2f071 pcnet: fix rx buffer overflow(CVE-2015-7512)
Backends could provide a packet whose length is greater than buffer
size. Check for this and truncate the packet to avoid rx buffer
overflow in this case.

Cc: Prasad J Pandit <pjp@fedoraproject.org>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-12-07 21:43:48 +08:00
Prasad J Pandit 837f21aacf net: pcnet: add check to validate receive data size(CVE-2015-7504)
In loopback mode, pcnet_receive routine appends CRC code to the
receive buffer. If the data size given is same as the buffer size,
the appended CRC code overwrites 4 bytes after s->buffer. Added a
check to avoid that.

Reported by: Qinghao Tang <luodalongde@gmail.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-12-07 21:43:48 +08:00
Denis V. Lunev 9596ef7c7b e1000: fix hang of win2k12 shutdown with flood ping
e1000 driver in Win2k12 is really well rotten. It 100% hangs on shutdown
of UP VM under flood ping. The guest checks card state and reinjects
itself interrupt in a loop. This is fatal for UP machine.

There is no good way to fix this misbehavior but to kludge it. The
emulation has interrupt throttling register aka ITR which limits
interrupt rate and allows the guest to proceed this phase.
There is no problem with this kludge for Linux guests - it adjust the
value of it itself.

On the other hand according to the initial research in
    commit e9845f0985
    Author: Vincenzo Maffione <v.maffione@gmail.com>
    Date:   Fri Aug 2 18:30:52 2013 +0200

    e1000: add interrupt mitigation support

    ...

    Interrupt mitigation boosts performance when the guest suffers from
    an high interrupt rate (i.e. receiving short UDP packets at high packet
    rate). For some numerical results see the following link
    http://info.iet.unipi.it/~luigi/papers/20130520-rizzo-vm.pdf

this should also boost performance a bit.

See https://bugzilla.redhat.com/show_bug.cgi?id=874406 for additional
details.

Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Vincenzo Maffione <v.maffione@gmail.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-12-07 21:43:43 +08:00
Peter Maydell a5582eac15 Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging
QOM infrastructure fixes and device conversions

* Documentation update
* qom-test and related fixes

# gpg: Signature made Fri 04 Dec 2015 17:54:55 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg:                 aka "Andreas Färber <afaerber@suse.com>"

* remotes/afaerber/tags/qom-devices-for-peter:
  qom-test: Fix qmp() leaks
  tests: Use proper functions types instead of void (*fn)
  qom: Update documentation comment of struct Object
  tests: Fix check-report-qtest-% target

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-04 18:11:40 +00:00
Marc-André Lureau 0d2cd785ef qom-test: Fix qmp() leaks
Before this patch ASAN reported:
SUMMARY: AddressSanitizer: 677165875 byte(s) leaked in 1272437 allocation(s)

After this patch:
SUMMARY: AddressSanitizer: 465 byte(s) leaked in 32 allocation(s)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1448551895-871-1-git-send-email-marcandre.lureau@redhat.com>
[Straightforwardly rebased onto the previous patch]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-12-04 18:29:31 +01:00
Markus Armbruster 041088c719 tests: Use proper functions types instead of void (*fn)
We have several function parameters declared as void (*fn).  This is
just a stupid way to write void *, and the only purpose writing it
like that could serve is obscuring the sin of bypassing the type
system without need.

The original sin is commit 49ee359: its qtest_add_func() is a wrapper
for g_test_add_func().  Fix the parameter type to match
g_test_add_func()'s.  This uncovers type errors in ide-test.c; fix
them.

Commit 7949c0e faithfully repeated the sin for qtest_add_data_func().
Fix it the same way, along with a harmless type error uncovered in
vhost-user-test.c.

Commit 063c23d repeated it for qtest_add_abrt_handler().  The screwy
parameter gets assigned to GHook member func, so change its type to
match.  Requires wrapping kill_qemu() to keep the type checker happy.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[AF/armbru: Inline GTestFunc/GTestDataFunc typedef for old GLib]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-12-04 18:25:42 +01:00
Peter Maydell 61e3aa25b1 Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2015-12-04' into staging
trivial patches for 2015-12-04

# gpg: Signature made Fri 04 Dec 2015 06:40:23 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"

* remotes/mjt/tags/pull-trivial-patches-2015-12-04:
  bt: check struct sizes
  typedefs: Put them back into alphabetical order
  scsi: remove scsi_req_free prototype
  gt64xxx: fix decoding of ISD register
  configure: use appropriate code fragment for -fstack-protector checks
  crypto: avoid two coverity false positive error reports
  configure: Diagnose broken linkers directly
  bt: avoid unintended sign extension
  util/id: fully allocate names table

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-04 10:55:03 +00:00
Peter Maydell f33d046d23 Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.5-20151204' into staging
ppc patch queue for 2.5 2015-12-04

This contains some last minute QOM behaviour fixes from Markus
Armbruster.

# gpg: Signature made Fri 04 Dec 2015 06:43:54 GMT using RSA key ID 20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.5-20151204:
  spapr_drc: Change value of property "fdt" from null back to {}
  spapr_drc: Make device "spapr-dr-connector" unavailable with -device
  spapr_drc: Handle visitor errors properly

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-04 09:49:28 +00:00
Paolo Bonzini 98475746b3 bt: check struct sizes
See http://permalink.gmane.org/gmane.linux.bluez.kernel/36505.  For historical
reasons these do not use sizeof, and Coverity caught a mistake in
EVT_ENCRYPT_CHANGE_SIZE.

In addition:

- remove status from create_conn_cancel_cp; the "status" field is only
in rp structs.  Note that this means that the OCF_CREATE_CONN_CANCEL
could never have worked (it would have failed the LENGTH_CHECK), but
I am keeping it anyway.

- OCF_READ_LINK_QUALITY similarly could never have worked, but I am
fixing read_link_quality_cp anyway.

- fix inquiry_info which is shorter by one: the kernel has a struct that
is 14 byte long, but not counting the initial num_responses byte which
the kernel parses separately;

- remove extended_inquiry_info altogether, since it's not used and unlike
the other inquiry structs does not have the initial num_responses byte.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-12-04 09:39:55 +03:00
Markus Armbruster 2988cbeaf9 typedefs: Put them back into alphabetical order
"Please keep this list in alphabetical order" has been more honoured
in the breach than in the observance.  Clean up.

While there, drop a redundant struct declaration.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-12-04 09:39:55 +03:00
Hervé Poussineau 8ea9900330 scsi: remove scsi_req_free prototype
Function has been deleted in ad2d30f79d.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-12-04 09:39:55 +03:00
Paolo Bonzini 63fc7375d6 gt64xxx: fix decoding of ISD register
The GT64xxx's internal registers can be placed above the first 4 GiB
in the address space, but not above the first 64 GiB.  Correctly cast
the register to a 64-bit integer, and mask away bits above bit 35.

Datasheet at http://pdf.datasheetarchive.com/datasheetsmain/Datasheets-33/DSA-655889.pdf
(bug reported by Coverity).

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-12-04 09:39:55 +03:00
Rodrigo Rebello fccd35a046 configure: use appropriate code fragment for -fstack-protector checks
The check for stack-protector support consisted in compiling and linking
the test program below (output by function write_c_skeleton()) with the
compiler flag -fstack-protector-strong first and then with
-fstack-protector-all if the first one failed to work:

  int main(void) { return 0; }

This caused false positives when using certain toolchains in which the
compiler accepted -fstack-protector-strong but no support was provided
by the C library, since for this stack-protector variant the compiler
emits canary code only for functions that meet specific conditions
(local arrays, memory references to local variables, etc.) and the code
fragment under test included none of them (hence no stack protection
code generated, no link failure).

This fix changes the test program used for -fstack-protector checks to
include a function that meets conditions which cause the compiler to
generate canary code in all variants.

Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-12-04 09:39:55 +03:00
Daniel P. Berrange 0e1d02452b crypto: avoid two coverity false positive error reports
In qcrypto_tls_creds_get_path() coverity complains that
we are checking '*creds' for NULL, despite having
dereferenced it previously. This is harmless bug due
to fact that the trace call was too early. Moving it
after the cleanup gets the desired semantics.

In qcrypto_tls_creds_check_cert_key_purpose() coverity
complains that we're passing a pointer to a previously
free'd buffer into gnutls_x509_crt_get_key_purpose_oid()
This is harmless because we're passing a size == 0, so
gnutls won't access the buffer, but rather just report
what size it needs to be. We can avoid it though by
explicitly setting the buffer to NULL after free'ing
it.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-12-04 09:39:55 +03:00
Peter Maydell 0ef74c7496 configure: Diagnose broken linkers directly
Currently if the user's compiler works for creating .o files but
their linker is broken such that compiling an executable from a
C file does not work, we will report a misleading error message
about the compiler not supporting __thread (since that happens
to be the first test we run which requires a working linker).
Explicitly check that compile_prog works as well as compile_object,
so that people whose toolchain setup is broken get a more helpful
error message.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-12-04 09:39:55 +03:00
Paolo Bonzini e0df8f18f7 bt: avoid unintended sign extension
In the case of a 4-byte length, shifting a value by 24 may cause
an unintended sign extension when converting from int to size_t.
Use a uint32_t variable instead.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-12-04 09:39:55 +03:00
John Snow 624533e5a5 util/id: fully allocate names table
Trivial: this array should be allocated to have ID_MAX entries always.
Otherwise if someone were to forget to expand this table, the assertion
in the id generator won't actually trigger; it will read junk data.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-12-04 09:39:55 +03:00
Markus Armbruster ab8bf1d735 spapr_drc: Change value of property "fdt" from null back to {}
prop_get_fdt() misuses the visitor API: when fdt is null, it doesn't
visit anything.  object_property_get_qobject() happily
object_property_get_qobject().  Amazingly, the latter survives the
misuse.  Turns out we've papered over it long before prop_get_fdt()
existed, in commit 1d10b44.

However, commit 6c2f9a1 changed how we paper over it, and as a side
effect changed qom-get's value from {} to null.  Change it right back
by fixing the visitor misuse.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-12-04 16:50:59 +11:00
Markus Armbruster c401ae8c9c spapr_drc: Make device "spapr-dr-connector" unavailable with -device
It should only be created via spapr_dr_connector_new().  Attempting to
create it with -device crashes.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-12-04 10:56:29 +11:00
Markus Armbruster c75304a139 spapr_drc: Handle visitor errors properly
Since prop_get_fdt() is only used with QmpOutputVisitor, errors
shouldn't actually happen, so this is only a latent bug.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-12-04 10:56:29 +11:00
Cao jin 70ae0b6d0e qom: Update documentation comment of struct Object
It doesn't have "GSList *interfaces" anymore, drop the paragraph.

Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-12-03 20:10:22 +01:00
Andreas Färber b5e62af8aa tests: Fix check-report-qtest-% target
Commit e253c28 ("tests: Fix how qom-test is run") introduced
$(qtest-generic-y) and used it for check-qtest-% target, but did not
update check-report-qtest-%. This causes check-report-qtest-aarch64.xml
target to fail with a gtester usage error for lack of test arguments.

Fix this by adding $(qtest-generic-y) in check-report-qtest-%.
Also add it in check-clean target, spotted by Markus.

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-12-03 20:07:05 +01:00
Prasad J Pandit 4c65fed8bd ui: vnc: avoid floating point exception
While sending 'SetPixelFormat' messages to a VNC server,
the client could set the 'red-max', 'green-max' and 'blue-max'
values to be zero. This leads to a floating point exception in
write_png_palette while doing frame buffer updates.

Reported-by: Lian Yihan <lianyihan@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-03 13:34:50 +00:00
Peter Maydell efdeb96c5a Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
# gpg: Signature made Thu 03 Dec 2015 04:59:48 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/block-pull-request:
  iotests: Add regresion test case for write notifier assertion failure
  iotests: Add "add_drive_raw" method
  block: Don't wait serialising for non-COR read requests
  iothread: include id in thread name

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-03 11:08:43 +00:00
Peter Maydell eab0ebc7fe Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20151203' into staging
migration/next for 20151203

# gpg: Signature made Wed 02 Dec 2015 23:19:10 GMT using RSA key ID 5872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg:                 aka "Juan Quintela <quintela@trasno.org>"

* remotes/juanquintela/tags/migration/20151203:
  migration: do floating-point division
  migration: Clean up use of g_poll() in socket_writev_buffer()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-03 10:43:43 +00:00
Fam Zheng 9cc0f19de2 iotests: Add regresion test case for write notifier assertion failure
The idea is to let the top level bs have a big request alignment with
blkdebug, so that the aio_write request issued from monitor will be
serialised. This tests that QEMU doesn't crash upon the read request
from the backup job's write notifier, which is a very special case of
"reentrant" request.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1448962590-2842-4-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-12-03 11:08:07 +08:00
Fam Zheng 78b666f46b iotests: Add "add_drive_raw" method
This offers full manual control over the "-drive" options.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1448962590-2842-3-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-12-03 11:08:07 +08:00
Fam Zheng 61408b250e block: Don't wait serialising for non-COR read requests
The assertion problem was noticed in 06c3916b35, but it wasn't
completely fixed, because even though the req is not marked as
serialising, it still gets serialised by wait_serialising_requests
against other serialising requests, which could lead to the same
assertion failure.

Fix it by even more explicitly skipping the serialising for this
specific case.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1448962590-2842-2-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-12-03 11:08:07 +08:00
Paolo Bonzini d21e8776f6 iothread: include id in thread name
This makes it easier to find the desired thread.  Use "IO" plus the id;
even with the 14 character limit on the thread name, enough of the id should
be readable (e.g. "IO iothreadNNN" with three characters for the number).

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1448372804-5034-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-12-03 11:08:01 +08:00
Peter Maydell ec1b9aa89d Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio,vhost,mmap fixes for 2.5

vhost test patches to fix the travis build
virtio ccw patch to fix virtio 1
virtio pci patch to fix pci express
vhost user bridge patch to fix fd leaks
mmap-alloc patch to fix hugetlbfs on ppc64
remove dead code for vhost (trivial)

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Wed 02 Dec 2015 20:38:41 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  util/mmap-alloc: fix hugetlb support on ppc64
  virtio-pci: Set the QEMU_PCI_CAP_EXPRESS capability early in its DeviceClass realize method
  virtio: handle non-virtio-1-capable backend for ccw
  tests/vhost-user-bridge.c: fix fd leakage
  vhost: drop dead code
  vhost-user: verify that number of queues is non-zero
  vhost-user-test: fix crash with glib < 2.36
  vhost-user-test: use unix port for migration
  vhost-user-test: fix chardriver race

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-02 23:11:24 +00:00
Paolo Bonzini a694ee343d migration: do floating-point division
Dividing integer expressions transferred_bytes and time_spent, and then converting
the integer quotient to type double. Any remainder, or fractional part of the
quotient, is ignored.  Fix this.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-12-03 00:03:00 +01:00
Markus Armbruster 4e39f57c00 migration: Clean up use of g_poll() in socket_writev_buffer()
socket_writev_buffer() writes in a loop, using g_poll() to block.  If
g_poll() fails, it tries to write more before the file descriptor is
ready.  In theory, this could go into a tight loop.  In practice,
errors other than EINTR are really unlikely, and when they happen,
we're probably screwed anyway, so we can just as well loop.

Clean it up a bit: retry poll on EINTR, keep ignoring other errors.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-12-03 00:03:00 +01:00
Michael S. Tsirkin 7197fb4058 util/mmap-alloc: fix hugetlb support on ppc64
Since commit 8561c9244d "exec: allocate PROT_NONE pages on top of
RAM", it is no longer possible to back guest RAM with hugepages on ppc64
hosts:

mmap(NULL, 285212672, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0x3fff57000000
mmap(0x3fff57000000, 268435456, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED, 19, 0) = -1 EBUSY (Device or resource busy)

This is because on ppc64, Linux fixes a page size for a virtual address
at mmap time, so we can't switch a range of memory from anonymous
small pages to hugetlbs with MAP_FIXED.

See commit d0f13e3c20b6fb73ccb467bdca97fa7cf5a574cd
("[POWERPC] Introduce address space "slices"") in Linux
history for the details.

Detect this and create the PROT_NONE mapping using the same fd.

Naturally, this makes the guard page bigger with hugetlbfs.

Based on patch by Greg Kurz.

Acked-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-02 22:38:23 +02:00
Shmulik Ladkani 0560b0e97d virtio-pci: Set the QEMU_PCI_CAP_EXPRESS capability early in its DeviceClass realize method
In 1811e64 'hw/virtio: Add PCIe capability to virtio devices', the
QEMU_PCI_CAP_EXPRESS capability was added to virtio's pci_dev, within
'virtio_pci_realize' - the pci device object realization method.

This occurs to late, as 'pci_qdev_realize' (DeviceClass.realize of
TYPE_PCI_DEVICE) has already been called, without knowing that the
device instance is indeed an "express" instance, thus allocating
insufficient pci config space.

As a result, device may crash upon attempt to write to the PCIE config
space.

Fix, by arming the QEMU_PCI_CAP_EXPRESS capability early in virtio-pci's
own DeviceClass realize method.

This also makes code cleaner, as 'virtio_pci_realize' may now access the
'pci_is_express' predicate when needed.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-02 21:51:33 +02:00
Cornelia Huck 11380b3619 virtio: handle non-virtio-1-capable backend for ccw
If you run a qemu advertising VERSION_1 with an old kernel where
vhost did not yet support VERSION_1, you'll end up with a device
that is {modern pci|ccw revision 1} but does not advertise VERSION_1.
This is not a sensible configuration and is rejected by the Linux
guest drivers.

To fix this, add a ->post_plugged() callback invoked after features
have been queried that can handle the VERSION_1 bit being withdrawn
and change ccw to fall back to revision 0 if VERSION_1 is gone.

Note that pci is _not_ fixed; we'll need to rethink the approach
for the next release but at least for pci it's not a regression.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-02 19:34:11 +02:00
Victor Kaplansky 6d0b908a62 tests/vhost-user-bridge.c: fix fd leakage
This fixes file descriptor leakage in vhost-user-bridge
application. Whenever a new callfd or kickfd is set, the previous
one should be explicitly closed. File descriptors used to map
guest's memory are closed immediately after mmap call.

Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-02 19:27:26 +02:00
Peter Maydell cf22132367 Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches

# gpg: Signature made Wed 02 Dec 2015 15:57:35 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"

* remotes/kevin/tags/for-upstream:
  blkdebug: silence warning under qtest
  qcow2: Fix potential qemu-img check crash on 32 bit hosts

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-02 17:05:34 +00:00
Peter Maydell 2196b6f5dd Merge remote-tracking branch 'remotes/cody/tags/block-pull-request' into staging
# gpg: Signature made Wed 02 Dec 2015 15:45:36 GMT using RSA key ID C0DE3057
# gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>"
# gpg:                 aka "Jeffrey Cody <jeff@codyprime.org>"
# gpg:                 aka "Jeffrey Cody <codyprime@gmail.com>"

* remotes/cody/tags/block-pull-request:
  mirror: Quiesce source during "mirror_exit"

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-02 16:24:26 +00:00
Michael S. Tsirkin b0ae1536c5 vhost: drop dead code
commit 1e7398a1 ("vhost: enable vhost without without MSI-X"_
dropped the implementation of vhost_dev_query,
drop it from the header file as well.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
2015-12-02 17:59:13 +02:00
Fam Zheng 176c36997f mirror: Quiesce source during "mirror_exit"
With dataplane, the ioeventfd events could be dispatched after
mirror_run releases the dirty bitmap, but before mirror_exit actually
does the device switch, because the iothread will still be running, and
it will cause silent data loss.

Fix this by adding a bdrv_drained_begin/end pair around the window, so
that no new external request will be handled.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
2015-12-02 10:44:06 -05:00
Peter Maydell 30a9fd5d13 Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* exec.c use after free
* Xen 32-on-64 breakage
* missing EINTR
* naughty warning under qtest

# gpg: Signature made Wed 02 Dec 2015 12:13:55 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"

* remotes/bonzini/tags/for-upstream:
  translate-all: ensure host page mask is always extended with 1's
  main-loop: suppress warnings under qtest
  qemu-char: retry g_poll on EINTR
  exec: Stop using memory after free

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-02 15:41:38 +00:00
Kevin Wolf ab7fe3a29a Merge remote-tracking branch 'mreitz/tags/pull-block-for-kevin-2015-12-02' into queue-block
One block patch for qemu 2.5-rc3.

# gpg: Signature made Wed Dec  2 16:29:17 2015 CET using RSA key ID E838ACAD
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"

* mreitz/tags/pull-block-for-kevin-2015-12-02:
  blkdebug: silence warning under qtest

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-12-02 16:38:03 +01:00
Michael S. Tsirkin 20873526a3 blkdebug: silence warning under qtest
make check always outputs warnings, this
is not nice.  Disable blkdebug warnings under qtest.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1448883874-17933-1-git-send-email-mst@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-12-02 16:28:10 +01:00
Victor Kaplansky 6f6f9512ea vhost-user: verify that number of queues is non-zero
Fix QEMU crash when -netdev type=vhost-user,queues=n is passed
with zero number of queues.

Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
2015-12-02 16:42:27 +02:00
Marc-André Lureau 45ce512670 vhost-user-test: fix crash with glib < 2.36
The prepare callback needs to be implemented with glib < 2.36,
quoting glib documentation:
"Since 2.36 this may be NULL, in which case the effect is as if the
function always returns FALSE with a timeout of -1."

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-02 16:42:26 +02:00
Marc-André Lureau a899b1ea2a vhost-user-test: use unix port for migration
TCP port 1234 may be used by another process concurrently. Instead use a
temporary unix socket.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-02 16:42:26 +02:00
Marc-André Lureau 9732baf678 vhost-user-test: fix chardriver race
vhost-user-tests uses a helper thread to dispatch the vhost-user servers
sources. However the CharDriverState is not thread-safe. Therefore, when
it's given to the thread, it shouldn't be manipulated concurrently.

We dispatch cleaning the server in an idle source. By the end of the
test, we ensure not to leave anything behind by joining the thread and
finishing the sources dispatch.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-02 16:42:26 +02:00
Kevin Wolf c2551b47c9 qcow2: Fix potential qemu-img check crash on 32 bit hosts
This crash was caught with qemu-iotests test case 138.

Commit b6d36de already fixed a few 32 bit truncation bugs that could
cause qemu-img check to allocate too little memory and consequently
it would segfault. On 32 bit hosts, there is one more place that needs
to be fixed because size_t was involved in the calculation and is a
32 bit type there.

Cc: qemu-stable@nongnu.org
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-02 13:22:29 +01:00
Paolo Bonzini 0c2d70c448 translate-all: ensure host page mask is always extended with 1's
Anthony reported that >4GB guests on Xen with 32bit QEMU broke after
commit 4ed023c ("Round up RAMBlock sizes to host page sizes", 2015-11-05).

In that patch sizes are masked against qemu_host_page_size/mask which
are uintptr_t, and thus 32bit on a 32bit QEMU, even though the ram space
might be bigger than 4GB on Xen.

Since ram_addr_t is not available on user-mode emulation targets, ensure
that we get a sign extension when masking away the low bits of the address.
Remove the ~10 year old scary comment that the type of these variables
is probably wrong, with another equally scary comment.  The new comment
however does not have "???" in it, which is arguably an improvement.

For completeness use the alignment macros in linux-user and bsd-user
instead of manually doing an &.  linux-user and bsd-user are not affected
by the Xen issue, however.

Reviewed-by: Juan Quintela <quintela@redhat.com>
Reported-by: Anthony PERARD <anthony.perard@citrix.com>
Fixes: 4ed023ce2a
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-02 13:12:30 +01:00
Michael S. Tsirkin 21a24302e8 main-loop: suppress warnings under qtest
commit 01c22f2cdd ("main-loop: Suppress
"I/O thread spun" warnings for qtest") doesn't actually disable the
warning for everyone since some tests don't run under the qtest
accelerator.

Check qtest_driver instead.

Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <1448882964-22433-1-git-send-email-mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-02 12:01:43 +01:00
Paolo Bonzini c1f2448998 qemu-char: retry g_poll on EINTR
This is a case where pty_chr_update_read_handler_locked's lack
of error checking can produce incorrect values.  We are not using
SIGUSR1 anymore, so this is quite theoretical, but easy to fix.

Reported-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-02 12:01:43 +01:00
Don Slutz 55b4e80b04 exec: Stop using memory after free
memory_region_unref(mr) can free memory.

For example I got:

Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7f43280d4700 (LWP 4462)]
0x00007f43323283c0 in phys_section_destroy (mr=0x7f43259468b0)
    at /home/don/xen/tools/qemu-xen-dir/exec.c:1023
1023        if (mr->subpage) {
(gdb) bt
    at /home/don/xen/tools/qemu-xen-dir/exec.c:1023
    at /home/don/xen/tools/qemu-xen-dir/exec.c:1034
    at /home/don/xen/tools/qemu-xen-dir/exec.c:2205
(gdb) p mr
$1 = (MemoryRegion *) 0x7f43259468b0

And this change prevents this.

Signed-off-by: Don Slutz <Don.Slutz@Gmail.com>
Message-Id: <1448921464-21845-1-git-send-email-Don.Slutz@Gmail.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-02 12:01:43 +01:00
Peter Maydell 9d7b969ea6 Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20151201' into staging
Last minute fix

# gpg: Signature made Tue 01 Dec 2015 22:37:25 GMT using RSA key ID 4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"

* remotes/rth/tags/pull-tcg-20151201:
  tcg: Increase the highwater reservation

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-02 10:16:53 +00:00
Richard Henderson b17a6d3390 tcg: Increase the highwater reservation
If there are a lot of guest memory ops in the TB, the amount of
code generated by tcg_out_tb_finalize could be well more than 1k.
In the short term, increase the reservation larger than any TB
seen in practice.

Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-12-01 14:36:32 -08:00
Peter Maydell 8d3a5d9b0f ui/cocoa.m: Prevent activation clicks from going to guest
When QEMU is brought to the foreground, the click event that activates QEMU
should not go to the guest. Accidents happen when they do go to the guest
without giving the user a chance to handle them. In particular, if the
guest input device is not an absolute-position one then the location of
the guest cursor (and thus the click) will likely not be the location of
the host cursor when it is clicked, and could be completely obscured
below another window. Don't send mouse clicks to QEMU unless the
window either has focus or has grabbed mouse events.

Reported-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 1448551168-13196-1-git-send-email-peter.maydell@linaro.org
2015-12-01 21:22:41 +00:00
Peter Maydell e3d58827fe Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20151201' into staging
Last round of s390x fixes for 2.5:
- The bios should be built for the first z machine, so that newer
  instructions don't creep in.
- Silence annoying message when running make check.
- Fix a problem with the pci iommu exposed by recent changes.

# gpg: Signature made Tue 01 Dec 2015 08:59:42 GMT using RSA key ID C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>"

* remotes/cohuck/tags/s390x-20151201:
  s390x/pci: fix up IOMMU size
  s390x: no deprecation warning while testing
  pc-bios/s390-ccw: rebuild image
  pc-bios/s390-ccw: build for z900

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-01 16:30:27 +00:00
Yi Min Zhao f0a399dbae s390x/pci: fix up IOMMU size
Present code uses @size==UINT64_MAX to initialize IOMMU. It infers that it
can map any 64-bit IOVA whatsoever. But in fact, the largest DMA range for
each PCI Device on s390x is from ZPCI_SDMA_ADDR to ZPCI_EDMA_ADDR. The largest
value is returned from hardware, which is to indicate the largest range
hardware can support. But the real IOMMU size for specific PCI Device is
obtained once qemu intercepts mpcifc instruction that guest is requesting a
DMA range for that PCI Device. Therefore, before intercepting mpcifc instruction,
qemu cannot be aware of the size of IOMMU region that guest will use.

Moreover, iommu replay during device initialization for the whole region in
4k steps takes a very long time.

In conclusion, this patch intializes IOMMU region for each PCI Device when
intercept mpcifc instruction which is to register DMA range for the PCI Device.
And then, destroy IOMMU region when guest wants to deregister IOAT.

Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-12-01 09:57:28 +01:00
Cornelia Huck 567c88c354 s390x: no deprecation warning while testing
'make check' tries to start all available machines; the deprecation
message for the s390-virtio machine is both useless and annoying
there. Silence it while testing.

Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-01 09:57:27 +01:00
Cornelia Huck 07af4c53a5 pc-bios/s390-ccw: rebuild image
Contains:
- pc-bios/s390-ccw: build for z900

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-12-01 09:57:27 +01:00
Christian Borntraeger 7619562a64 pc-bios/s390-ccw: build for z900
Newer distributions have an architecture level set to z9, z196
or similar - also as default option for the compiler.

We should build the bios for z900 to allow it to run with
all 64bit CPUs. This will become more important as soon as
QEMU/KVM does support CPU models.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-By: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-12-01 09:57:27 +01:00
Peter Maydell d90eb45902 Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging
Two fixes for virtfs/9p from Paolo.

# gpg: Signature made Mon 30 Nov 2015 14:10:47 GMT using DSA key ID 0101DBC2
# gpg: Good signature from "Greg Kurz <gkurz@fr.ibm.com>"
# gpg:                 aka "Greg Kurz <groug@free.fr>"
# gpg:                 aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg:                 aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg:                 aka "Gregory Kurz (Cimai Technology) <gkurz@cimai.com>"
# gpg:                 aka "Gregory Kurz (Meiosys Technology) <gkurz@meiosys.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894  DBA2 02FC 3AEB 0101 DBC2

* remotes/gkurz/tags/for-upstream:
  virtio-9p: use QEMU thread pool
  fsdev-proxy-helper: avoid TOC/TOU race

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-30 21:59:22 +00:00
Peter Maydell a2485925f7 Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.5-20151130' into staging
ppc patch queue for qemu-2.5 20151130

target-ppc and related bugfix patches for qemu-2.5

I don't have the facilities to test the Macintosh and BookE related
patches.  I've sanity checked them (inspection + make check), but I'm
otherwise relying on the submitters.

# gpg: Signature made Mon 30 Nov 2015 08:42:01 GMT using RSA key ID 20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.5-20151130:
  target-ppc/fpu_helper: fix FPSCR_FX bit shift operation
  target-ppc: Move the FPSCR bit update macros to cpu.h
  hw/ppc/ppc405_boards: Fix infinite recursion by converting taihu_cpld from old_mmio
  hw/ppc/spapr: Remove duplicated "pseries" alias
  mac_dbdma: always initialize channel field in DBDMA_channel

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-30 17:09:35 +00:00
Peter Maydell 680617ed43 Merge remote-tracking branch 'remotes/weil/tags/pull-wxx-20151130' into staging
wxx patch queue

# gpg: Signature made Mon 30 Nov 2015 05:48:33 GMT using RSA key ID 677450AD
# gpg: Good signature from "Stefan Weil <sw@weilnetz.de>"
# gpg:                 aka "Stefan Weil <stefan.weil@weilnetz.de>"
# gpg:                 aka "Stefan Weil <stefan.weil@bib.uni-mannheim.de>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 4923 6FEA 75C9 5D69 8EC2  B78A E08C 21D5 6774 50AD

* remotes/weil/tags/pull-wxx-20151130:
  w32: Use gcc option -mthreads
  oslib-win32: Change return type of function getpagesize
  trace/simple: Fix warning and wrong trace file name for MinGW

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-30 15:35:20 +00:00
Paolo Bonzini ebac1202c9 virtio-9p: use QEMU thread pool
The QEMU thread pool already has a mechanism to invoke callbacks in the main
thread.  It does not need an EventNotifier and it is more efficient too.
Use it instead of GAsyncQueue + GThreadPool + glue.

As a side effect, it silences Coverity's complaint about an unchecked
return value for event_notifier_init.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
(removed no more needed #include <glib.h> from virtio-9p-coth.h)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
2015-11-30 12:36:12 +01:00
Paolo Bonzini 49f817caaf fsdev-proxy-helper: avoid TOC/TOU race
There is a minor time of check/time of use race between statfs and chroot.
It can be fixed easily by stat-ing the root after it has been changed.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
2015-11-30 12:31:53 +01:00
Madhavan Srinivasan 7624789234 target-ppc/fpu_helper: fix FPSCR_FX bit shift operation
Currently in TCG mode, updating floating exception
summary bit (FPSCR_FX) in fpscr also updates
the upper 32bits of fpscr with all 1s.
Modify the bit shift operation statement to use
1ULL instead.

Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-30 19:39:01 +11:00
Madhavan Srinivasan dbdc13a1ac target-ppc: Move the FPSCR bit update macros to cpu.h
Move the FPSCR bit update macros defined in dfp_helper
to cpu.h. This way, fpu_helper functions can also use them

Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-30 19:39:01 +11:00
Peter Maydell e2a176dfda hw/ppc/ppc405_boards: Fix infinite recursion by converting taihu_cpld from old_mmio
The taihu_cpld_writel() function had an obvious typo that meant that
if it was ever called it would go into an infinite recursion. Newer
versions of clang will detect and warn about this:
  hw/ppc/ppc405_boards.c:481:1: warning: all paths through this function will call itself [-Winfinite-recursion]

Fix this by converting taihu_cpld from the legacy old_mmio accessors
to new-style ones, with an impl {} declaration to cause the core
memory code to do the splitting of 16 bit and 32 bit accesses into
multiple 8-bit accesses.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-30 19:39:00 +11:00
Thomas Huth 9b7a70e63e hw/ppc/spapr: Remove duplicated "pseries" alias
The "pseries" alias is currently set twice, one time for the
pseries-2.4 machine and one time for the "pseries-2.5" machine.
To avoid confusion with the alias, let's remove the one from
the older machine class. And while we're at it, also remove
the "is_default = 0" there since the is_default variable
should be set to zero by default already.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-30 19:39:00 +11:00
Hervé Poussineau 7f0d763ce6 mac_dbdma: always initialize channel field in DBDMA_channel
dbdma_from_ch() uses channel field to return the right DBDMA object.
Previous code was working if guest OS was only using registered DMA channels.
However, it lead to QEMU crashes if guest OS was using unregistered DMA channels.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-30 19:38:44 +11:00
Stefan Weil 78e9d4ad11 w32: Use gcc option -mthreads
QEMU uses threads / coroutines, therefore support for thread local storage
and thread safe libraries (-D_MT) must be enabled by using -mthreads.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
2015-11-30 06:47:02 +01:00
Stefan Weil a28c2f2df7 oslib-win32: Change return type of function getpagesize
getpagesize on Linux returns an int. Fix QEMU's implementation for
Windows to return an int (instead of size_t), too.

This fixes a compiler warning which was introduced recently
(commit 093e3c42).

Signed-off-by: Stefan Weil <sw@weilnetz.de>
2015-11-30 06:47:02 +01:00
Stefan Weil 857a0e387a trace/simple: Fix warning and wrong trace file name for MinGW
On Windows, getpid() always returns an int value, but pid_t (which is
expected by the format string) is either a 32 bit or a 64 bit value.

Without a type cast (or a modified format string), the compiler prints
a warning when building for 64 bit Windows and the resulting trace_file_name
will include a wrong pid:

trace/simple.c:332:9: warning:
 format ‘%lld’ expects argument of type ‘long long int’,
 but argument 2 has type ‘int’ [-Wformat=]

Signed-off-by: Stefan Weil <sw@weilnetz.de>
2015-11-30 06:47:02 +01:00
Peter Maydell 714487515d Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Fri 27 Nov 2015 02:42:02 GMT using RSA key ID 398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
  tap-win32: disable broken async write path
  tap-win32: skip unexpected nodes during registry enumeration
  eepro100: Prevent two endless loops

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-27 10:44:42 +00:00
Andrew Baumann b73c184914 tap-win32: disable broken async write path
The code under the TUN_ASYNCHRONOUS_WRITES path makes two incorrect
assumptions about the behaviour of the WriteFile API for overlapped
file handles. First, WriteFile does not update the
lpNumberOfBytesWritten parameter when the write completes
asynchronously (the number of bytes written is known only when the
operation completes). Second, the buffer shouldn't be touched (or
freed) until the operation completes. This led to at least one bug
where tap_win32_write returned zero bytes written, which in turn
caused further writes ("receives") to be disabled for that device.

This change disables the asynchronous write path, while keeping most
of the code around in case someone sees value in resurrecting it. It
also adds some conditional debug output, similar to the read path.

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Acked-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-11-27 10:39:55 +08:00
Andrew Baumann ee0428e3ac tap-win32: skip unexpected nodes during registry enumeration
In order to find a named tap device, get_device_guid() enumerates children of
HKLM\SYSTEM\CCS\Control\Network\{4D36E972-E325-11CE-BFC1-08002BE10318}
(aka NETWORK_CONNECTIONS_KEY). For each child, it then looks for a
"Connection" subkey, but if this key doesn't exist, it aborts the
entire search. This was observed to fail on at least one Windows 10
machine, where there is an additional child of NETWORK_CONNECTIONS_KEY
(named "Descriptions"). Since registry enumeration doesn't guarantee
any particular sort order, we should continue to search for matching
children rather than aborting the search.

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-11-27 10:39:55 +08:00
Stefan Weil 00837731d2 eepro100: Prevent two endless loops
http://lists.nongnu.org/archive/html/qemu-devel/2015-11/msg04592.html
shows an example how an endless loop in function action_command can
be achieved.

During my code review, I noticed a 2nd case which can result in an
endless loop.

Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-11-27 10:39:55 +08:00
Peter Maydell b04fc42835 Update version for v2.5.0-rc2 release
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-26 17:50:12 +00:00
Peter Maydell 72f75c76d8 Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
vhost, pc: fixes for 2.5

Minor vhost fixes.  HW version tweak for PC.
Documentation and test updates.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 26 Nov 2015 16:40:25 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  vhost-user-test: fix migration overlap test
  Fix memory leak on error
  Revert "vhost: send SET_VRING_ENABLE at start/stop"
  tests/vhost-user-bridge: read command line arguments
  tests/vhost-user-bridge: propose GUEST_ANNOUNCE feature
  vhost-user: clarify start and enable
  vhost-user: set link down when the char device is closed
  pc: Don't set hw_version on pc-*-2.5
  osdep: Change default value of qemu_hw_version() to "2.5+"

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-26 16:50:59 +00:00
Michael S. Tsirkin d08e42a112 vhost-user-test: fix migration overlap test
During migration, source does GET_BASE, destination does SET_BASE.
Use that as opposed to fds being configured to detect
vhost user running on both source and destination.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-11-26 18:39:34 +02:00
Peter Maydell a5df35070a Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2015-11-26' into staging
QMP and QObject patches

# gpg: Signature made Thu 26 Nov 2015 09:07:18 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"

* remotes/armbru/tags/pull-monitor-2015-11-26:
  qjson: Limit number of tokens in addition to total size
  qjson: surprise, allocating 6 QObjects per token is expensive
  qjson: store tokens in a GQueue
  qjson: Convert to parser to recursive descent
  qjson: replace QString in JSONLexer with GString
  qjson: Inline token_is_escape() and simplify
  qjson: Inline token_is_keyword() and simplify
  qjson: Give each of the six structural chars its own token type
  qjson: Spell out some silent assumptions
  check-qjson: Add test for JSON nesting depth limit
  qjson: Don't crash when input exceeds nesting limit
  qjson: Apply nesting limit more sanely
  monitor: Plug memory leak on QMP error

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-26 16:27:26 +00:00
Peter Maydell 317e4db6e9 Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Small patches, without the one that introduces -fwrapv.

# gpg: Signature made Thu 26 Nov 2015 15:48:53 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"

* remotes/bonzini/tags/for-upstream:
  target-i386: kvm: Print warning when clearing mcg_cap bits
  target-i386: kvm: Use env->mcg_cap when setting up MCE
  target-i386: kvm: Abort if MCE bank count is not supported by host
  virtio-scsi: don't crash without a valid device
  target-sparc: fix 32-bit truncation in fpackfix
  exec: remove warning about mempath and hugetlbfs
  Revert "exec: silence hugetlbfs warning under qtest"
  call bdrv_drain_all() even if the vm is stopped
  MAINTAINERS: Update TCG CPU cores section

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-26 15:56:53 +00:00
Eduardo Habkost 5120901a37 target-i386: kvm: Print warning when clearing mcg_cap bits
Instead of silently clearing mcg_cap bits when the host doesn't
support them, print a warning when doing that.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[Avoid \n at end of error_report. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1448471956-66873-10-git-send-email-pbonzini@redhat.com>
2015-11-26 16:48:16 +01:00
Eduardo Habkost 2590f15b13 target-i386: kvm: Use env->mcg_cap when setting up MCE
When setting up MCE, instead of using the MCE_*_DEF macros
directly, just filter the existing env->mcg_cap value.

As env->mcg_cap is already initialized as
MCE_CAP_DEF|MCE_BANKS_DEF at target-i386/cpu.c:mce_init(), this
doesn't change any behavior. But it will allow us to change
mce_init() in the future, to implement different defaults
depending on CPU model, machine-type or command-line parameters.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1448471956-66873-9-git-send-email-pbonzini@redhat.com>
2015-11-26 16:48:11 +01:00
Eduardo Habkost 49b69cbfcd target-i386: kvm: Abort if MCE bank count is not supported by host
Instead of silently changing the number of banks in mcg_cap based
on kvm_get_mce_cap_supported(), abort initialization if the host
doesn't support MCE_BANKS_DEF banks.

Note that MCE_BANKS_DEF was always 10 since it was introduced in
QEMU, and Linux always returned 32 at KVM_CAP_MCE since
KVM_CAP_MCE was introduced, so no behavior is being changed and
the error can't be triggered by any Linux version. The point of
the new check is to ensure we won't silently change the bank
count if we change MCE_BANKS_DEF or make the bank count
configurable in the future.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[Avoid Yoda condition and \n at end of error_report. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1448471956-66873-8-git-send-email-pbonzini@redhat.com>
2015-11-26 16:48:07 +01:00
Eugene (jno) Dvurechenski 3e32e8a96e virtio-scsi: don't crash without a valid device
Make sure that we actually have a device when checking the aio
context. Otherwise guests could trigger QEMU crashes.

Signed-off-by: "Eugene (jno) Dvurechenski" <jno@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1448549135-6582-2-git-send-email-jno@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-26 16:47:44 +01:00
Paolo Bonzini 12a3567c40 target-sparc: fix 32-bit truncation in fpackfix
This is reported by Coverity.  The algorithm description at
ftp://ftp.icm.edu.pl/packages/ggi/doc/hw/sparc/Sparc.pdf suggests
that the 32-bit parts of rs2, after the left shift, is treated
as a 64-bit integer.  Bits 32 and above are used to do the
saturating truncation.

Message-Id: <1446473134-4330-1-git-send-email-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-26 16:47:44 +01:00
Daniel P. Berrange bfc2a1a1f4 exec: remove warning about mempath and hugetlbfs
The gethugepagesize() method in exec.c printed a warning if
the file path for "-mem-path" or "-object memory-backend-file"
was not on a hugetlbfs filesystem. This warning is bogus, because
QEMU functions perfectly well with the path on a regular tmpfs
filesystem. Use of hugetlbfs vs tmpfs is a choice for the management
application or end user to make as best fits their needs. As such it
is inappropriate for QEMU to have an opinion on whether the user's
choice is right or wrong in this case.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1448448749-1332-3-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-26 16:47:44 +01:00
Daniel P. Berrange 2c189a4e12 Revert "exec: silence hugetlbfs warning under qtest"
This reverts commit 1c7ba94a18.

That commit changed QEMU initialization order from

 - object-initial, chardev, qtest, object-late

to

 - chardev, qtest, object-initial, object-late

This breaks chardev setups which need to rely on objects
having been created. For example, when chardevs use TLS
encryption in the future, they need to have tls credential
objects created first.

This revert, restores the ordering introduced in

  commit f08f9271bf
  Author: Daniel P. Berrange <berrange@redhat.com>
  Date:   Wed May 13 17:14:04 2015 +0100

    vl: Create (most) objects before creating chardev backends

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1448448749-1332-2-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-26 16:47:44 +01:00
Wen Congyang b2780d3253 call bdrv_drain_all() even if the vm is stopped
There are still I/O operations when the vm is stopped. For example,
stop the vm, and do block migration. In this case, we don't drain all
I/O operation, and may meet the following problem:

qemu-system-x86_64: migration/block.c:731: block_save_complete: Assertion `block_mig_state.submitted == 0' failed.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Message-Id: <564EE92E.4070701@cn.fujitsu.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-26 16:47:44 +01:00
Stefano Dong (董兴水) 903a41d341 Fix memory leak on error
hw/ppc/spapr.c: Fix memory leak on error, it was introduced in bc09e0611
hw/acpi/memory_hotplug.c: Fix memory leak on error, it was introduced in 34f2af3d

Signed-off-by: Stefano Dong (董兴水) <opensource.dxs@aliyun.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-11-26 14:27:52 +02:00
Peter Maydell fe4cf57da7 Merge remote-tracking branch 'remotes/kraxel/tags/pull-vnc-20151126-1' into staging
vnc: fix segfault

# gpg: Signature made Thu 26 Nov 2015 07:37:43 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-vnc-20151126-1:
  vnc: fix segfault

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-26 10:58:10 +00:00
Peter Maydell b8b0ee0ea3 Merge remote-tracking branch 'remotes/mdroth/tags/qga-pull-2015-11-25-v2-tag' into staging
qemu-ga patch queue for 2.5

* include additional w32 MSI install components needed for
  guest-exec
* fix 'make install' when compiling with --disable-tools
* fix potential data corruption/loss when accessing files
  bi-directionally via guest-file-{read,write}
* explicitly document how integer args for guest-file-seek map to
  SEEK_SET/SEEK_CUR/etc to avoid platform-specific differences

v2:
* fixed missing SoB

# gpg: Signature made Wed 25 Nov 2015 23:58:45 GMT using RSA key ID F108B584
# gpg: Good signature from "Michael Roth <flukshun@gmail.com>"
# gpg:                 aka "Michael Roth <mdroth@utexas.edu>"
# gpg:                 aka "Michael Roth <mdroth@linux.vnet.ibm.com>"

* remotes/mdroth/tags/qga-pull-2015-11-25-v2-tag:
  qga: added another non-interactive gspawn() helper file.
  qga: Better mapping of SEEK_* in guest-file-seek
  tests: add file-write-read test
  qga: flush explicitly when needed
  qga: gspawn() console helper to Windows guest agent msi build
  makefile: fix qemu-ga make install for --disable-tools

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-26 10:24:18 +00:00
Michael S. Tsirkin 449e357810 Revert "vhost: send SET_VRING_ENABLE at start/stop"
This reverts commit 3a12f32229.

In case of live migration several queues can be enabled and not only the
first one. So informing backend that only the first queue is enabled is
wrong.

Reported-by: Thibaut Collet <thibaut.collet@6wind.com>
Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
2015-11-26 12:02:11 +02:00
Peter Maydell 7ef7ddf376 Merge remote-tracking branch 'remotes/jnsnow/tags/ide-pull-request' into staging
# gpg: Signature made Wed 25 Nov 2015 20:25:21 GMT using RSA key ID AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>"

* remotes/jnsnow/tags/ide-pull-request:
  ide-test: fix timeouts
  atapi: Fix code indentation
  atapi: Account for failed and invalid operations in cd_read_sector()
  ide-test: cdrom_pio_impl fixup

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-26 09:44:25 +00:00
Markus Armbruster df649835fe qjson: Limit number of tokens in addition to total size
Commit 29c75dd "json-streamer: limit the maximum recursion depth and
maximum token count" attempts to guard against excessive heap usage by
limiting total token size (it says "token count", but that's a lie).

Total token size is a rather imprecise predictor of heap usage: many
small tokens use more space than few large tokens with the same input
size, because there's a constant per-token overhead: 37 bytes on my
system.

Tighten this up: limit the token count to 2Mi.  Chosen to roughly
match the 64MiB total token size limit.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1448486613-17634-13-git-send-email-armbru@redhat.com>
2015-11-26 10:07:07 +01:00
Paolo Bonzini 9bada89711 qjson: surprise, allocating 6 QObjects per token is expensive
Replace the contents of the tokens GQueue with a simple struct.  This cuts
the amount of memory allocated by tests/check-qjson from ~500MB to ~20MB,
and the execution time from 600ms to 80ms on my laptop.  Still a lot (some
could be saved by using an intrusive list, such as QSIMPLEQ, instead of
the GQueue), but the savings are already massive and the right thing to
do would probably be to get rid of json-streamer completely.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1448300659-23559-5-git-send-email-pbonzini@redhat.com>
[Straightforwardly rebased on my patches]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-11-26 10:07:07 +01:00
Paolo Bonzini 95385fe9ac qjson: store tokens in a GQueue
Even though we still have the "streamer" concept, the tokens can now
be deleted as they are read.  While doing so convert from QList to
GQueue, since the next step will make tokens not a QObject and we
will have to do the conversion anyway.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1448300659-23559-4-git-send-email-pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-11-26 10:07:07 +01:00
Markus Armbruster d538b25543 qjson: Convert to parser to recursive descent
We backtrack in parse_value(), even though JSON is LL(1) and thus can
be parsed by straightforward recursive descent.  Do exactly that.

Based on an almost-correct patch from Paolo Bonzini.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1448486613-17634-10-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-11-26 10:06:57 +01:00
Paolo Bonzini d2ca7c0b0d qjson: replace QString in JSONLexer with GString
JSONLexer only needs a simple resizable buffer.  json-streamer.c
can allocate memory for each token instead of relying on reference
counting of QStrings.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1448300659-23559-2-git-send-email-pbonzini@redhat.com>
[Straightforwardly rebased on my patches, checkpatch made happy]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-11-26 09:31:22 +01:00
Markus Armbruster 6b9606f68e qjson: Inline token_is_escape() and simplify
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1448486613-17634-8-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-11-26 09:27:23 +01:00
Markus Armbruster 50e2a467f5 qjson: Inline token_is_keyword() and simplify
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1448486613-17634-7-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-11-26 09:22:57 +01:00
Markus Armbruster c54616608a qjson: Give each of the six structural chars its own token type
Simplifies things, because we always check for a specific one.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1448486613-17634-6-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-11-26 09:22:54 +01:00
Markus Armbruster b8d3b1da3c qjson: Spell out some silent assumptions
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1448486613-17634-5-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-11-26 09:18:45 +01:00
Markus Armbruster f0ae0304c7 check-qjson: Add test for JSON nesting depth limit
This would have prevented the regression mentioned in the previous
commit.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1448486613-17634-4-git-send-email-armbru@redhat.com>
2015-11-26 09:18:38 +01:00
Markus Armbruster 0753113a26 qjson: Don't crash when input exceeds nesting limit
We limit nesting depth and input size to defend against input
triggering excessive heap or stack memory use (commit 29c75dd
json-streamer: limit the maximum recursion depth and maximum token
count).  However, when the nesting limit is exceeded,
parser_context_peek_token()'s assertion fails.

Broken in commit 65c0f1e "json-parser: don't replicate tokens at each
level of recursion".

To reproduce stuff 1025 open braces or brackets into QMP.

Fix by taking the error exit instead of the normal one.

Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1448486613-17634-3-git-send-email-armbru@redhat.com>
2015-11-26 09:18:04 +01:00
Markus Armbruster 4f2d31fbc0 qjson: Apply nesting limit more sanely
The nesting limit from commit 29c75dd "json-streamer: limit the
maximum recursion depth and maximum token count" applies separately to
braces and brackets.  This makes no sense.  Apply it to their sum,
because that's actually a measure of recursion depth.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1448486613-17634-2-git-send-email-armbru@redhat.com>
2015-11-26 09:17:57 +01:00
Markus Armbruster 3a81a10179 monitor: Plug memory leak on QMP error
Leak introduced in commit 8a4f501..710aec9, v2.4.0.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1446117309-15322-1-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-11-26 09:15:37 +01:00
Gerd Hoffmann 7fe4a41c26 vnc: fix segfault
Commit "c7628bf vnc: only alloc server surface with clients connected"
missed one rarely used codepath (cirrus with guest drivers using 2d
accel) where we have to check for the server surface being present,
to avoid qemu crashing with a NULL pointer dereference.  Add the check.

Reported-by: Anthony PERARD <anthony.perard@citrix.com>
Tested-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-11-26 08:32:11 +01:00
Yuri Pudgorodskiy 44c6e00c3f qga: added another non-interactive gspawn() helper file.
With previous commit we added gspawn-win64-helper-console.exe,
required for gspawn() mingw implementation.
Unfortunatly when running as a service without interactive
desktop, gspawn() also requires another helper app.

Added gspawn-win64-helper.exe and gspawn-win32-helper.exe
for corresponding architectures.

Signed-off-by: Yuri Pudgorodskiy <yur@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
* remove trailing whitespace
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-11-25 17:56:45 -06:00
Eric Blake 0a982b1bf3 qga: Better mapping of SEEK_* in guest-file-seek
Exposing OS-specific SEEK_ constants in our qapi was a mistake
(if the host has SEEK_CUR as 1, but the guest has it as 2, then
the semantics are unclear what should happen); if we had a time
machine, we would instead expose only a symbolic enum.  It's too
late to change the fact that we have an integer in qapi, but we
can at least document what mapping we want to enforce for all
qga clients (and luckily, it happens to be the mapping that both
Linux and Windows use); then fix the code to match that mapping.
It also helps us filter out unsupported SEEK_DATA and SEEK_HOLE.

In the future, we may wish to move our QGA_SEEK_* constants into
qga/qapi-schema.json, along with updating the schema to take an
alternate type (either the integer, or the string value of the
enum name) - but that's too much risk during hard freeze.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-11-25 17:56:45 -06:00
Marc-André Lureau 4eaab85cb1 tests: add file-write-read test
This test exhibits a POSIX behaviour regarding switching between write
and read. It's undefined result if the application doesn't ensure a
flush between the two operations (with glibc, the flush can be implicit
when the buffer size is relatively small). The previous commit fixes
this test.

Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1210246

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-11-25 17:56:45 -06:00
Marc-André Lureau 895b00f62a qga: flush explicitly when needed
According to the specification:
http://pubs.opengroup.org/onlinepubs/9699919799/functions/fopen.html

"the application shall ensure that output is not directly followed by
input without an intervening call to fflush() or to a file positioning
function (fseek(), fsetpos(), or rewind()), and input is not directly
followed by output without an intervening call to a file positioning
function, unless the input operation encounters end-of-file."

Without this change, an fwrite() followed by an fread() may lose the
previously written content, as shown in the following test.

Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1210246

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
* don't confuse {write,read}() with f{write,read}() in
  commit msg (Laszlo)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-11-25 17:56:31 -06:00
John Snow 9c73517ca5 ide-test: fix timeouts
Use explicit timeouts instead of trying to approximate it by counting
the cumulative duration of nsleep calls.

In practice, the timeout if inb() dwarfed the nsleep delays, and as a
result the real timeout value became a lot larger than 5 seconds.

So: change the semantics from "Not sooner than 5 seconds" to "no more
than 5 seconds" to ensure we don't hang the tester for very long.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1448393771-15483-2-git-send-email-jsnow@redhat.com
2015-11-25 11:37:34 -05:00
Yuri Pudgorodskiy f2b608ab80 qga: gspawn() console helper to Windows guest agent msi build
This helper, gspawn-win64-helper-console.exe for 64-bit and
gspawn-win32-helper-console.exe for 32-bit environment,
is needed for gspawn() mingw implementation, used by guest-exec command.

Without these files guest-exec command on Windows will not
work with "file not found" diagnostic message.

Signed-off-by: Yuri Pudgorodskiy <yur@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-11-25 10:21:55 -06:00
Michael Roth 68aa262ad0 makefile: fix qemu-ga make install for --disable-tools
ab59e3e introduced a fix for `make install` on w32 that involved
filtering out qemu-ga from $TOOLS install recipe so that we could
append $(EXESUF) to it before attempting to install the binary
via install-prog function.

install-prog takes a list of binaries to install to a particular
directory. If the list is empty it breaks. We guard against this
by ensuring $TOOLS is not empty prior to calling.

However, ab59e3e introduces extra filtering after this check which
can still result on us attempting to call install-prog with an
empty list of binaries. In particular, this occurs if we
build with the --disable-tools configure option, which results
in qemu-ga being the only member of $TOOLS.

Fix this by doing a simple s/qemu-ga/qemu-ga$(EXESUF)/ pass through
$TOOLS instead of filtering out qemu-ga to handle it seperately.

Reported-by: Steve Ellcey <sellcey@imgtec.com>
Cc: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-11-25 10:21:54 -06:00
Peter Maydell c7933a80bc Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20151125' into staging
migration/next for 20151125

# gpg: Signature made Wed 25 Nov 2015 14:28:47 GMT using RSA key ID 5872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg:                 aka "Juan Quintela <quintela@trasno.org>"

* remotes/juanquintela/tags/migration/20151125:
  block-migration: limit the memory usage
  Assume madvise for (no)hugepage works

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-25 16:20:58 +00:00
Peter Maydell 1a4dab849d Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches

# gpg: Signature made Wed 25 Nov 2015 13:33:14 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"

* remotes/kevin/tags/for-upstream:
  qemu-iotests: Add -nographic when starting QEMU in 119 and 120
  block/qapi: Plug memory leak on query-block error path
  raw-posix.c: Make GetBSDPath() handle caching options
  nand: fix flash erase when oob is in memory
  test-aio: Fix event notifier cleanup
  tests/Makefile: Add more dependencies for test-timed-average

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-25 14:47:06 +00:00
Wen Congyang f77dcdbc76 block-migration: limit the memory usage
If we set migration speed in a very large value, block-migration will try to read
all data to the memory. Because
    (block_mig_state.submitted + block_mig_state.read_done) * BLOCK_SIZE
will be overflow, and it will be always less than rate limit.

There is no need to read too many data into memory when the rate limit is very large.
So limit the memory usage can fix the overflow problem.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-25 15:27:28 +01:00
Dr. David Alan Gilbert 1d7414396f Assume madvise for (no)hugepage works
madvise() returns EINVAL in the case of many failures, but also
returns it in cases where the host kernel doesn't have THP enabled.
Postcopy only really cares that THP is off before it detects faults,
and turns it back on afterwards; so we're going to have
to assume that if the madvise fails then the host just doesn't do
THP and we can carry on with the postcopy.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-25 15:27:28 +01:00
Kevin Wolf 8c34d891b1 Merge remote-tracking branch 'mreitz/tags/pull-block-for-kevin-2015-11-25' into queue-block
One block patch for qemu 2.5-rc2.

# gpg: Signature made Wed Nov 25 14:30:45 2015 CET using RSA key ID E838ACAD
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"

* mreitz/tags/pull-block-for-kevin-2015-11-25:
  qemu-iotests: Add -nographic when starting QEMU in 119 and 120

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-25 14:33:01 +01:00
Fam Zheng 4d7f853ff0 qemu-iotests: Add -nographic when starting QEMU in 119 and 120
Otherwise, a window flashes on my desktop (built with SDL). Add this as
other cases have it.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1448245930-15031-1-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-11-25 14:29:39 +01:00
Markus Armbruster 903c341d57 block/qapi: Plug memory leak on query-block error path
Spotted by Coverity.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-25 14:27:43 +01:00
Programmingkid 98caa5bc00 raw-posix.c: Make GetBSDPath() handle caching options
Add support for caching options that can be specified from the command
line.

The CD-ROM raw char device bypasses the host page cache and therefore
has alignment requirements.  Alignment probing is necessary so only use
the raw char device if BDRV_O_NOCACHE is set.

This patch fixes -cdrom /dev/cdrom on Mac OS X hosts, where bdrv_read()
used to fail due to misaligned requests during image format probing.

Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-25 14:27:43 +01:00
Ricard Wanderlof 8e37ca6d0b nand: fix flash erase when oob is in memory
For the "main area on file, oob in memory" case, fix the shifts so that
we erase the correct number of pages.

Signed-off-by: Ricard Wanderlöf <ricardw@axis.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-25 14:27:43 +01:00
Kevin Wolf 7595ed7439 test-aio: Fix event notifier cleanup
One test case closed an event notifier (event_notifier_cleanup())
without first disabling it (set_event_notifier(..., NULL)). This
resulted in a leftover handle 0 that was added to each subsequent
WaitForMultipleObjects() call, causing the function to fail (invalid
handle).

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-11-25 14:27:43 +01:00
Kevin Wolf 5e41fbffa1 tests/Makefile: Add more dependencies for test-timed-average
'make check' failed to compile the test case for mingw because of
undefined references. Pull in a few more dependencies so that it builds.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-11-25 14:27:43 +01:00
Peter Maydell e85dda8070 Merge remote-tracking branch 'remotes/sstabellini/tags/xen-20151125' into staging
Xen 2015/11/25

# gpg: Signature made Wed 25 Nov 2015 11:19:26 GMT using RSA key ID 70E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"

* remotes/sstabellini/tags/xen-20151125:
  xen_disk: Remove ioreq.postsync
  xen: fix usage of xc_domain_create in domain builder

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-25 12:09:34 +00:00
Paolo Bonzini 2b1641d0a2 MAINTAINERS: Update TCG CPU cores section
These are the people that I think have been touching it lately
or reviewing patches.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-25 12:50:20 +01:00
Victor Kaplansky 7cf32491ea tests/vhost-user-bridge: read command line arguments
Now some vhost-user-bridge parameters can be passed from the
command line:

Usage: prog [-u ud_socket_path] [-l lhost:lport] [-r rhost:rport]
        -u path to unix doman socket. default: /tmp/vubr.sock
        -l local host and port. default: 127.0.0.1:4444
        -r remote host and port. default: 127.0.0.1:5555

Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-11-25 13:42:38 +02:00
Victor Kaplansky 85ea9da5b8 tests/vhost-user-bridge: propose GUEST_ANNOUNCE feature
The backend has to know whether VIRTIO_NET_F_GUEST_ANNOUNCE was
negotiated, so, as a hack we propose the feature by
vhost-user-bridge during the feature negotiation.

Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-11-25 13:42:38 +02:00
Michael S. Tsirkin c61f09ed85 vhost-user: clarify start and enable
It seems that we currently have some duplication between
started and enabled states.

The actual reason is that enable is not documented correctly:
what it does is connecting ring to the backend.

This is important for MQ, because a Linux guest expects TX
packets to be completed even if it disables some queues
temporarily.

Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Cc: Victor Kaplansky <victork@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-11-25 13:42:38 +02:00
Wen Congyang d39c87d707 vhost-user: set link down when the char device is closed
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
2015-11-25 13:42:38 +02:00
Eduardo Habkost 463b52f285 pc: Don't set hw_version on pc-*-2.5
Now that qemu_hw_version() returns a fixed "2.5+" string instead
of QEMU_VERSION, we don't need to set hw_version on pc-*-2.5
explicitly.

Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-11-25 13:42:37 +02:00
Eduardo Habkost fac862ffa6 osdep: Change default value of qemu_hw_version() to "2.5+"
There are two issues with qemu_hw_version() today:

1) If a machine has hw_version set, the value returned by it is
   not very useful, because it is not the actual QEMU version.
2) If a machine does't set hw_version, the return value of
   qemu_hw_version() is broken, because it will change when
   upgrading QEMU.

For those reasons, using qemu_hw_version() is strongly
discouraged, and should be used only in code that used
QEMU_VERSION in the past and needs to keep compatibility.

To fix (2), instead of making every machine broken by default
unless they set hw_version, make qemu_hw_version() simply return
"2.5+" if qemu_set_hw_version() is not called.

Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-11-25 13:42:37 +02:00
Peter Maydell 1aae36df4b Merge remote-tracking branch 'remotes/armbru/tags/pull-ivshmem-2015-11-25' into staging
ivshmem patches for 2.5

# gpg: Signature made Wed 25 Nov 2015 09:25:38 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"

* remotes/armbru/tags/pull-ivshmem-2015-11-25:
  ivshmem: Rename property memdev to x-memdev for 2.5
  ivshmem: Mark questionable socket type test FIXME
  tests/ivshmem-test: Supply missing initializer in get_device()
  qemu-doc: Fix ivshmem usage example with shm=...
  qemu-doc: Fix ivshmem example markup

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-25 11:38:03 +00:00
Alberto Garcia 22037db38c xen_disk: Remove ioreq.postsync
This code has been dead for three years (since commit 7e7b7cba1).

Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-11-25 11:04:55 +00:00
Markus Armbruster 1d649244b3 ivshmem: Rename property memdev to x-memdev for 2.5
The device's guest interface and its QEMU user interface are
flawed^Whotly debated.  We'll resolve that in the next development
cycle, probably by deprecating the device in favour of a cleaned up,
but not quite compatible revision.

To avoid adding more baggage to the soon-to-be-deprecated interface,
mark property "memdev" as experimental, by renaming it to "x-memdev".
It's the only recent user interface change.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1448384789-14830-6-git-send-email-armbru@redhat.com>
[Update of qemu-doc.texi squashed in]
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2015-11-25 10:24:27 +01:00
Markus Armbruster 2825717c02 ivshmem: Mark questionable socket type test FIXME
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2015-11-25 10:24:15 +01:00
Markus Armbruster 1613094766 tests/ivshmem-test: Supply missing initializer in get_device()
If the device isn't found, the assertion uses dev without
initialization.  Fix that.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1448384789-14830-4-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2015-11-25 10:24:04 +01:00
Markus Armbruster a9282c25a5 qemu-doc: Fix ivshmem usage example with shm=...
The example suggests you can omit "shm".  This isn't true; you must
specify exactly one of "shm", "chardev", "memdev".  Fix it.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1448384789-14830-3-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2015-11-25 10:23:52 +01:00
Markus Armbruster 50d34c4e35 qemu-doc: Fix ivshmem example markup
Use @var{foo} like we do everywhere else, not <foo>.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1448384789-14830-2-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2015-11-25 10:23:33 +01:00
Alberto Garcia 73a27d9ac3 atapi: Fix code indentation
This was accidentally changed by commit 5f81724d

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 93fb43522e3b8dddb6c709d568919347d9a5ba3f.1448367341.git.berto@igalia.com
Signed-off-by: John Snow <jsnow@redhat.com>
2015-11-24 14:56:49 -05:00
Alberto Garcia 36be0929f5 atapi: Account for failed and invalid operations in cd_read_sector()
Commit 5f81724d made PIO read requests async but didn't add the
relevant block_acct_failed() and block_acct_invalid() calls.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 9b87e09d61019c128139b6c999ed0c07f0674170.1448367341.git.berto@igalia.com
Signed-off-by: John Snow <jsnow@redhat.com>
2015-11-24 14:56:48 -05:00
John Snow a421f3c385 ide-test: cdrom_pio_impl fixup
Final tidying: move the interrupt wait into the loop,
document that the status read clears the IRQ, and move
the final interrupt check outside of the loop.

This should be functionally equivalent to how it works
currently, but a little less ambiguous and slightly more
explicit about the state transitions.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1448060035-31973-3-git-send-email-jsnow@redhat.com
2015-11-24 14:51:43 -05:00
Peter Maydell 4b6eda626f Merge remote-tracking branch 'remotes/lalrae/tags/mips-20151124' into staging
MIPS patches 2015-11-24

Changes:
* Fixes for enabling/disabling 64-bit addressing

# gpg: Signature made Tue 24 Nov 2015 14:54:35 GMT using RSA key ID 0B29DA6B
# gpg: Good signature from "Leon Alrae <leon.alrae@imgtec.com>"

* remotes/lalrae/tags/mips-20151124:
  target-mips: flush QEMU TLB when disabling 64-bit addressing
  target-mips: Fix exceptions while UX=0

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-24 17:05:06 +00:00
Peter Maydell d9636b6c2b Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20151124' into staging
target-arm queue:
 * fix minimum RAM check warning on xlnx-ep108
 * remove unused define from aarch64-linux-user.mak config
 * don't mask out bits [47:40] in ARMv8 LPAE descriptors
 * correct unallocated instruction checks for ldst_excl

# gpg: Signature made Tue 24 Nov 2015 14:17:10 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"

* remotes/pmaydell/tags/pull-target-arm-20151124:
  target-arm/translate-a64.c: Correct unallocated checks for ldst_excl
  target-arm: Don't mask out bits [47:40] in LPAE descriptors for v8
  default-configs/aarch64-linux-user.mak: Remove unused define
  xlnx-ep108: Fix minimum RAM check

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-24 14:22:38 +00:00
Peter Maydell e14f0eb12f target-arm/translate-a64.c: Correct unallocated checks for ldst_excl
The checks for the unallocated encodings in the ldst_excl group
(exclusives and load-acquire/store-release) were not correct. This
error meant that in turn we ended up with code attempting to handle
the non-existent case of "non-exclusive load-acquire/store-release
pair". Delete that broken and now unreachable code.

Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
2015-11-24 14:12:15 +00:00
Peter Maydell 6109769a8b target-arm: Don't mask out bits [47:40] in LPAE descriptors for v8
In an LPAE format descriptor in ARMv8 the address field extends
up to bit 47, not just bit 39. Correct the masking so we don't
give incorrect results if the output address size is greater
than 40 bits, as it can be for AArch64.

(Note that we don't yet support the new-in-v8 Address Size fault which
should be generated if any translation table entry or TTBR contains
an address with non-zero bits above the most significant bit of the
maximum output address size.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1448029971-9875-1-git-send-email-peter.maydell@linaro.org
2015-11-24 14:12:15 +00:00
Peter Maydell f72c0a79f7 default-configs/aarch64-linux-user.mak: Remove unused define
The uses of the CONFIG_GDBSTUB_XML define were removed in commit
b77abd95a9, but the define in aarch64-linux-user.mak somehow
escaped the cull (the patchset probably crossed in the mail with
the patches adding aarch64 support). Remove the stray define.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 1447690178-4560-1-git-send-email-peter.maydell@linaro.org
2015-11-24 14:12:15 +00:00
Alistair Francis 5b4a047fbe xlnx-ep108: Fix minimum RAM check
The minimum RAM check logic for the Xiilnx EP108 was off by one,
which caused a false positive. Correct the logic to only print
warnings when the RAM is below 0x8000000.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: fba8112ca7b01efd72553332b8045ecf107b7662.1448021100.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-24 14:12:15 +00:00
Leon Alrae f93c3a8d0c target-mips: flush QEMU TLB when disabling 64-bit addressing
CP0.Status.KX/SX/UX bits are responsible for enabling access to 64-bit
Kernel/Supervisor/User Segments. If bit is cleared an access to
corresponding segment should generate Address Error Exception.

However, the guest may still be able to access some pages belonging to
the disabled 64-bit segment because we forget to flush QEMU TLB.

This patch fixes it.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-11-24 11:01:03 +00:00
James Hogan 7871abb94c target-mips: Fix exceptions while UX=0
Commit 01f7288579 ("target-mips: Status.UX/SX/KX enable 32-bit address
wrapping") added a new hflag MIPS_HFLAG_AWRAP, which indicates that
64-bit addressing is disallowed in the current mode, so hflag users
don't need to worry about the complexities of working that out, for
example checking both MIPS_HFLAG_KSU and MIPS_HFLAG_UX.

However when exceptions are taken outside of exception level,
mips_cpu_do_interrupt() manipulates the env->hflags directly rather than
using compute_hflags() to update them, and this code wasn't updated
accordingly. As a result, when UX is cleared, MIPS_HFLAG_AWRAP is set,
but it doesn't get cleared on entry back into kernel mode due to an
exception. Kernel mode then cannot access the 64-bit segments resulting
in a nested exception loop. The same applies to errors and debug
exceptions.

Fix by updating mips_cpu_do_interrupt() to clear the MIPS_HFLAG_WRAP
flag when necessary, according to compute_hflags().

Fixes: 01f7288579 ("target-mips: Status.UX/SX/KX enable 32-bit...")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-11-24 11:01:03 +00:00
Peter Maydell 229c0372cf Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
# gpg: Signature made Tue 24 Nov 2015 08:04:07 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/block-pull-request:
  virtio-blk: Move resetting of req->mr_next to virtio_blk_handle_rw_error
  parallels: dirty BAT properly for continuous allocations

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-24 10:27:19 +00:00
Fam Zheng 466138dc68 virtio-blk: Move resetting of req->mr_next to virtio_blk_handle_rw_error
"werror=report" would free the req in virtio_blk_handle_rw_error, we
mustn't write to it in that case.

Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1448239280-15025-1-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-11-24 09:27:49 +08:00
Vladimir Sementsov-Ogievskiy c9f6856ded parallels: dirty BAT properly for continuous allocations
This patch marks part of the BAT dirty properly. There is a possibility that
multy-block allocation could have one block allocated on one BAT page and
next block on the next page. The code without the patch could not save
updated position to the file.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-id: 1447779778-26062-1-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-11-24 09:25:36 +08:00
Peter Maydell 5522a841ca Merge remote-tracking branch 'remotes/ehabkost/tags/numa-pull-request' into staging
NUMA fix for -rc2

# gpg: Signature made Mon 23 Nov 2015 12:45:34 GMT using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"

* remotes/ehabkost/tags/numa-pull-request:
  hostmem: Ignore ENOSYS while setting MPOL_DEFAULT

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-23 16:07:49 +00:00
Peter Maydell 68c61282fe Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20151123' into staging
Last minute fix.

# gpg: Signature made Mon 23 Nov 2015 12:17:26 GMT using RSA key ID 4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"

* remotes/rth/tags/pull-tcg-20151123:
  tcg: Fix highwater check

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-23 13:54:41 +00:00
Pavel Fedin a3567ba1e6 hostmem: Ignore ENOSYS while setting MPOL_DEFAULT
Currently hostmem backend fails if CONFIG_NUMA is enabled in QEMU
(the default) but NUMA is not supported by the kernel. This makes
it impossible to use ivshmem in such configurations.

This patch fixes the problem by ignoring ENOSYS error if policy is set to
MPOL_DEFAULT. This way the code behaves in the same way as if CONFIG_NUMA
was not defined. qemu will still fail if the user specifies some other
policy, so that the user knows it.

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-11-23 10:43:38 -02:00
John Clarke 644da9b39e tcg: Fix highwater check
A simple typo in the variable to use when comparing vs the highwater mark.
Reports are that qemu can in fact segfault occasionally due to this mistake.

Signed-off-by: John Clarke <johnc@kirriwa.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-11-23 13:16:05 +01:00
Roger Pau Monne cdadde39a8 xen: fix usage of xc_domain_create in domain builder
Due to the addition of HVMlite and the requirement to always provide a
valid xc_domain_configuration_t, xc_domain_create now always takes an arch
domain config, which can be NULL in order to mimic previous behaviour.

Add a small stub called xen_domain_create that encapsulates the correct
call to xc_domain_create depending on the libxc version detected.

Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-11-13 17:38:06 +00:00
196 changed files with 2298 additions and 1223 deletions

No files matched your search

+14 -4
View File
@@ -62,14 +62,22 @@ Guest CPU cores (TCG):
----------------------
Overall
L: qemu-devel@nongnu.org
S: Odd fixes
M: Paolo Bonzini <pbonzini@redhat.com>
M: Peter Crosthwaite <crosthwaite.peter@gmail.com>
M: Richard Henderson <rth@twiddle.net>
S: Maintained
F: cpu-exec.c
F: cpu-exec-common.c
F: cpus.c
F: cputlb.c
F: exec.c
F: softmmu_template.h
F: translate-all.c
F: include/exec/cpu_ldst.h
F: include/exec/cpu_ldst_template.h
F: translate-all.*
F: translate-common.c
F: include/exec/cpu*.h
F: include/exec/exec-all.h
F: include/exec/helper*.h
F: include/exec/tb-hash.h
Alpha
M: Richard Henderson <rth@twiddle.net>
@@ -855,6 +863,7 @@ F: net/vhost-user.c
virtio-9p
M: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
M: Greg Kurz <gkurz@linux.vnet.ibm.com>
S: Supported
F: hw/9pfs/
F: fsdev/
@@ -1042,6 +1051,7 @@ S: Supported
F: include/exec/ioport.h
F: ioport.c
F: include/exec/memory.h
F: include/exec/ram_addr.h
F: memory.c
F: include/exec/memory-internal.h
F: exec.c
+1 -4
View File
@@ -440,10 +440,7 @@ endif
install: all $(if $(BUILD_DOCS),install-doc) \
install-datadir install-localstatedir
ifneq ($(TOOLS),)
$(call install-prog,$(filter-out qemu-ga,$(TOOLS)),$(DESTDIR)$(bindir))
ifneq (,$(findstring qemu-ga,$(TOOLS)))
$(call install-prog,qemu-ga$(EXESUF),$(DESTDIR)$(bindir))
endif
$(call install-prog,$(subst qemu-ga,qemu-ga$(EXESUF),$(TOOLS)),$(DESTDIR)$(bindir))
endif
ifneq ($(CONFIG_MODULES),)
$(INSTALL_DIR) "$(DESTDIR)$(qemu_moddir)"
+1 -1
View File
@@ -1 +1 @@
2.4.91
2.5.1.1
+5 -3
View File
@@ -313,9 +313,11 @@ host_memory_backend_memory_complete(UserCreatable *uc, Error **errp)
assert(maxnode <= MAX_NODES);
if (mbind(ptr, sz, backend->policy,
maxnode ? backend->host_nodes : NULL, maxnode + 1, flags)) {
error_setg_errno(errp, errno,
"cannot bind memory to host NUMA nodes");
return;
if (backend->policy != MPOL_DEFAULT || errno != ENOSYS) {
error_setg_errno(errp, errno,
"cannot bind memory to host NUMA nodes");
return;
}
}
#endif
/* Preallocate memory after the NUMA policy has been instantiated.
+14 -10
View File
@@ -1976,21 +1976,25 @@ void bdrv_close_all(void)
}
}
/* Note that bs->device_list.tqe_prev is initially null,
* and gets set to non-null by QTAILQ_INSERT_TAIL(). Establish
* the useful invariant "bs in bdrv_states iff bs->tqe_prev" by
* resetting it to null on remove. */
void bdrv_device_remove(BlockDriverState *bs)
{
QTAILQ_REMOVE(&bdrv_states, bs, device_list);
bs->device_list.tqe_prev = NULL;
}
/* make a BlockDriverState anonymous by removing from bdrv_state and
* graph_bdrv_state list.
Also, NULL terminate the device_name to prevent double remove */
void bdrv_make_anon(BlockDriverState *bs)
{
/*
* Take care to remove bs from bdrv_states only when it's actually
* in it. Note that bs->device_list.tqe_prev is initially null,
* and gets set to non-null by QTAILQ_INSERT_TAIL(). Establish
* the useful invariant "bs in bdrv_states iff bs->tqe_prev" by
* resetting it to null on remove.
*/
/* Take care to remove bs from bdrv_states only when it's actually
* in it. */
if (bs->device_list.tqe_prev) {
QTAILQ_REMOVE(&bdrv_states, bs, device_list);
bs->device_list.tqe_prev = NULL;
bdrv_device_remove(bs);
}
if (bs->node_name[0] != '\0') {
QTAILQ_REMOVE(&graph_bdrv_states, bs, node_list);
@@ -2031,7 +2035,7 @@ static void change_parent_backing_link(BlockDriverState *from,
if (!to->device_list.tqe_prev) {
QTAILQ_INSERT_BEFORE(from, to, device_list);
}
QTAILQ_REMOVE(&bdrv_states, from, device_list);
bdrv_device_remove(from);
}
}
+1 -1
View File
@@ -132,7 +132,7 @@ static int coroutine_fn backup_do_cow(BlockDriverState *bs,
qemu_iovec_init_external(&bounce_qiov, &iov, 1);
if (is_write_notifier) {
ret = bdrv_co_no_copy_on_readv(bs,
ret = bdrv_co_readv_no_serialising(bs,
start * BACKUP_SECTORS_PER_CLUSTER,
n, &bounce_qiov);
} else {
+7 -2
View File
@@ -30,6 +30,7 @@
#include "qapi/qmp/qdict.h"
#include "qapi/qmp/qint.h"
#include "qapi/qmp/qstring.h"
#include "sysemu/qtest.h"
typedef struct BDRVBlkdebugState {
int state;
@@ -583,9 +584,13 @@ static void suspend_request(BlockDriverState *bs, BlkdebugRule *rule)
remove_rule(rule);
QLIST_INSERT_HEAD(&s->suspended_reqs, &r, next);
printf("blkdebug: Suspended request '%s'\n", r.tag);
if (!qtest_enabled()) {
printf("blkdebug: Suspended request '%s'\n", r.tag);
}
qemu_coroutine_yield();
printf("blkdebug: Resuming request '%s'\n", r.tag);
if (!qtest_enabled()) {
printf("blkdebug: Resuming request '%s'\n", r.tag);
}
QLIST_REMOVE(&r, next);
g_free(r.tag);
+9 -1
View File
@@ -457,6 +457,14 @@ bool blk_dev_has_removable_media(BlockBackend *blk)
return !blk->dev || (blk->dev_ops && blk->dev_ops->change_media_cb);
}
/*
* Does @blk's attached device model have a tray?
*/
bool blk_dev_has_tray(BlockBackend *blk)
{
return blk->dev_ops && blk->dev_ops->is_tray_open;
}
/*
* Notify @blk's attached device model of a media eject request.
* If @force is true, the medium is about to be yanked out forcefully.
@@ -473,7 +481,7 @@ void blk_dev_eject_request(BlockBackend *blk, bool force)
*/
bool blk_dev_is_tray_open(BlockBackend *blk)
{
if (blk->dev_ops && blk->dev_ops->is_tray_open) {
if (blk_dev_has_tray(blk)) {
return blk->dev_ops->is_tray_open(blk->dev_opaque);
}
return false;
+7 -5
View File
@@ -863,7 +863,9 @@ static int coroutine_fn bdrv_aligned_preadv(BlockDriverState *bs,
mark_request_serialising(req, bdrv_get_cluster_size(bs));
}
wait_serialising_requests(req);
if (!(flags & BDRV_REQ_NO_SERIALISING)) {
wait_serialising_requests(req);
}
if (flags & BDRV_REQ_COPY_ON_READ) {
int pnum;
@@ -952,7 +954,7 @@ static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
}
/* Don't do copy-on-read if we read data before write operation */
if (bs->copy_on_read && !(flags & BDRV_REQ_NO_COPY_ON_READ)) {
if (bs->copy_on_read && !(flags & BDRV_REQ_NO_SERIALISING)) {
flags |= BDRV_REQ_COPY_ON_READ;
}
@@ -1021,13 +1023,13 @@ int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num,
return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 0);
}
int coroutine_fn bdrv_co_no_copy_on_readv(BlockDriverState *bs,
int coroutine_fn bdrv_co_readv_no_serialising(BlockDriverState *bs,
int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
{
trace_bdrv_co_no_copy_on_readv(bs, sector_num, nb_sectors);
trace_bdrv_co_readv_no_serialising(bs, sector_num, nb_sectors);
return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov,
BDRV_REQ_NO_COPY_ON_READ);
BDRV_REQ_NO_SERIALISING);
}
int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs,
+4
View File
@@ -388,6 +388,7 @@ static void mirror_exit(BlockJob *job, void *opaque)
bdrv_unref(s->target);
block_job_completed(&s->common, data->ret);
g_free(data);
bdrv_drained_end(src);
bdrv_unref(src);
}
@@ -607,6 +608,9 @@ immediate_exit:
data = g_malloc(sizeof(*data));
data->ret = ret;
/* Before we switch to target in mirror_exit, make sure data doesn't
* change. */
bdrv_drained_begin(s->common.bs);
block_job_defer_to_main_loop(&s->common, mirror_exit, data);
}
+1 -1
View File
@@ -220,7 +220,7 @@ static int64_t allocate_clusters(BlockDriverState *bs, int64_t sector_num,
s->bat_bitmap[idx + i] = cpu_to_le32(s->data_end / s->off_multiplier);
s->data_end += s->tracks;
bitmap_set(s->bat_dirty_bmap,
bat_entry_off(idx) / s->bat_dirty_block, 1);
bat_entry_off(idx + i) / s->bat_dirty_block, 1);
}
return bat2sect(s, idx) + sector_num % s->tracks;
+3 -5
View File
@@ -436,7 +436,9 @@ BlockInfoList *qmp_query_block(Error **errp)
bdrv_query_info(blk, &info->value, &local_err);
if (local_err) {
error_propagate(errp, local_err);
goto err;
g_free(info);
qapi_free_BlockInfoList(head);
return NULL;
}
*p_next = info;
@@ -444,10 +446,6 @@ BlockInfoList *qmp_query_block(Error **errp)
}
return head;
err:
qapi_free_BlockInfoList(head);
return NULL;
}
BlockStatsList *qmp_query_blockstats(bool has_query_nodes,
+1 -1
View File
@@ -1244,7 +1244,7 @@ fail:
/* refcount checking functions */
static size_t refcount_array_byte_size(BDRVQcow2State *s, uint64_t entries)
static uint64_t refcount_array_byte_size(BDRVQcow2State *s, uint64_t entries)
{
/* This assertion holds because there is no way we can address more than
* 2^(64 - 9) clusters at once (with cluster size 512 = 2^9, and because
+7 -5
View File
@@ -646,8 +646,9 @@ static BlockAIOCB *read_quorum_children(QuorumAIOCB *acb)
}
for (i = 0; i < s->num_children; i++) {
bdrv_aio_readv(s->children[i]->bs, acb->sector_num, &acb->qcrs[i].qiov,
acb->nb_sectors, quorum_aio_cb, &acb->qcrs[i]);
acb->qcrs[i].aiocb = bdrv_aio_readv(s->children[i]->bs, acb->sector_num,
&acb->qcrs[i].qiov, acb->nb_sectors,
quorum_aio_cb, &acb->qcrs[i]);
}
return &acb->common;
@@ -662,9 +663,10 @@ static BlockAIOCB *read_fifo_child(QuorumAIOCB *acb)
qemu_iovec_init(&acb->qcrs[acb->child_iter].qiov, acb->qiov->niov);
qemu_iovec_clone(&acb->qcrs[acb->child_iter].qiov, acb->qiov,
acb->qcrs[acb->child_iter].buf);
bdrv_aio_readv(s->children[acb->child_iter]->bs, acb->sector_num,
&acb->qcrs[acb->child_iter].qiov, acb->nb_sectors,
quorum_aio_cb, &acb->qcrs[acb->child_iter]);
acb->qcrs[acb->child_iter].aiocb =
bdrv_aio_readv(s->children[acb->child_iter]->bs, acb->sector_num,
&acb->qcrs[acb->child_iter].qiov, acb->nb_sectors,
quorum_aio_cb, &acb->qcrs[acb->child_iter]);
return &acb->common;
}
+9 -13
View File
@@ -783,7 +783,6 @@ static int hdev_probe_geometry(BlockDriverState *bs, HDGeometry *geo)
{
BDRVRawState *s = bs->opaque;
struct hd_geometry ioctl_geo = {0};
uint32_t blksize;
/* If DASD, get its geometry */
if (check_for_dasd(s->fd) < 0) {
@@ -803,12 +802,6 @@ static int hdev_probe_geometry(BlockDriverState *bs, HDGeometry *geo)
}
geo->heads = ioctl_geo.heads;
geo->sectors = ioctl_geo.sectors;
if (!probe_physical_blocksize(s->fd, &blksize)) {
/* overwrite cyls: HDIO_GETGEO result is incorrect for big drives */
geo->cylinders = bdrv_nb_sectors(bs) / (blksize / BDRV_SECTOR_SIZE)
/ (geo->heads * geo->sectors);
return 0;
}
geo->cylinders = ioctl_geo.cylinders;
return 0;
@@ -1976,8 +1969,8 @@ BlockDriver bdrv_file = {
#if defined(__APPLE__) && defined(__MACH__)
static kern_return_t FindEjectableCDMedia( io_iterator_t *mediaIterator );
static kern_return_t GetBSDPath( io_iterator_t mediaIterator, char *bsdPath, CFIndex maxPathSize );
static kern_return_t GetBSDPath(io_iterator_t mediaIterator, char *bsdPath,
CFIndex maxPathSize, int flags);
kern_return_t FindEjectableCDMedia( io_iterator_t *mediaIterator )
{
kern_return_t kernResult;
@@ -2004,7 +1997,8 @@ kern_return_t FindEjectableCDMedia( io_iterator_t *mediaIterator )
return kernResult;
}
kern_return_t GetBSDPath( io_iterator_t mediaIterator, char *bsdPath, CFIndex maxPathSize )
kern_return_t GetBSDPath(io_iterator_t mediaIterator, char *bsdPath,
CFIndex maxPathSize, int flags)
{
io_object_t nextMedia;
kern_return_t kernResult = KERN_FAILURE;
@@ -2017,7 +2011,9 @@ kern_return_t GetBSDPath( io_iterator_t mediaIterator, char *bsdPath, CFIndex ma
if ( bsdPathAsCFString ) {
size_t devPathLength;
strcpy( bsdPath, _PATH_DEV );
strcat( bsdPath, "r" );
if (flags & BDRV_O_NOCACHE) {
strcat(bsdPath, "r");
}
devPathLength = strlen( bsdPath );
if ( CFStringGetCString( bsdPathAsCFString, bsdPath + devPathLength, maxPathSize - devPathLength, kCFStringEncodingASCII ) ) {
kernResult = KERN_SUCCESS;
@@ -2129,8 +2125,8 @@ static int hdev_open(BlockDriverState *bs, QDict *options, int flags,
int fd;
kernResult = FindEjectableCDMedia( &mediaIterator );
kernResult = GetBSDPath( mediaIterator, bsdPath, sizeof( bsdPath ) );
kernResult = GetBSDPath(mediaIterator, bsdPath, sizeof(bsdPath),
flags);
if ( bsdPath[ 0 ] != '\0' ) {
strcat(bsdPath,"s0");
/* some CDs don't have a partition 0 */
+12 -2
View File
@@ -570,6 +570,7 @@ static int vmdk_open_vmdk4(BlockDriverState *bs,
VmdkExtent *extent;
BDRVVmdkState *s = bs->opaque;
int64_t l1_backup_offset = 0;
bool compressed;
ret = bdrv_pread(file->bs, sizeof(magic), &header, sizeof(header));
if (ret < 0) {
@@ -644,6 +645,8 @@ static int vmdk_open_vmdk4(BlockDriverState *bs,
header = footer.header;
}
compressed =
le16_to_cpu(header.compressAlgorithm) == VMDK4_COMPRESSION_DEFLATE;
if (le32_to_cpu(header.version) > 3) {
char buf[64];
snprintf(buf, sizeof(buf), "VMDK version %" PRId32,
@@ -651,7 +654,8 @@ static int vmdk_open_vmdk4(BlockDriverState *bs,
error_setg(errp, QERR_UNKNOWN_BLOCK_FORMAT_FEATURE,
bdrv_get_device_or_node_name(bs), "vmdk", buf);
return -ENOTSUP;
} else if (le32_to_cpu(header.version) == 3 && (flags & BDRV_O_RDWR)) {
} else if (le32_to_cpu(header.version) == 3 && (flags & BDRV_O_RDWR) &&
!compressed) {
/* VMware KB 2064959 explains that version 3 added support for
* persistent changed block tracking (CBT), and backup software can
* read it as version=1 if it doesn't care about the changed area
@@ -1654,7 +1658,13 @@ static int vmdk_create_extent(const char *filename, int64_t filesize,
}
magic = cpu_to_be32(VMDK4_MAGIC);
memset(&header, 0, sizeof(header));
header.version = zeroed_grain ? 2 : 1;
if (compress) {
header.version = 3;
} else if (zeroed_grain) {
header.version = 2;
} else {
header.version = 1;
}
header.flags = VMDK4_FLAG_RGD | VMDK4_FLAG_NL_DETECT
| (compress ? VMDK4_FLAG_COMPRESS | VMDK4_FLAG_MARKER : 0)
| (zeroed_grain ? VMDK4_FLAG_ZERO_GRAIN : 0);
+35 -9
View File
@@ -2257,7 +2257,7 @@ void qmp_eject(const char *device, bool has_force, bool force, Error **errp)
return;
}
qmp_blockdev_remove_medium(device, errp);
qmp_x_blockdev_remove_medium(device, errp);
}
void qmp_block_passwd(bool has_device, const char *device,
@@ -2306,6 +2306,11 @@ void qmp_blockdev_open_tray(const char *device, bool has_force, bool force,
return;
}
if (!blk_dev_has_tray(blk)) {
/* Ignore this command on tray-less devices */
return;
}
if (blk_dev_is_tray_open(blk)) {
return;
}
@@ -2336,6 +2341,11 @@ void qmp_blockdev_close_tray(const char *device, Error **errp)
return;
}
if (!blk_dev_has_tray(blk)) {
/* Ignore this command on tray-less devices */
return;
}
if (!blk_dev_is_tray_open(blk)) {
return;
}
@@ -2343,7 +2353,7 @@ void qmp_blockdev_close_tray(const char *device, Error **errp)
blk_dev_change_media_cb(blk, true);
}
void qmp_blockdev_remove_medium(const char *device, Error **errp)
void qmp_x_blockdev_remove_medium(const char *device, Error **errp)
{
BlockBackend *blk;
BlockDriverState *bs;
@@ -2365,7 +2375,7 @@ void qmp_blockdev_remove_medium(const char *device, Error **errp)
return;
}
if (has_device && !blk_dev_is_tray_open(blk)) {
if (has_device && blk_dev_has_tray(blk) && !blk_dev_is_tray_open(blk)) {
error_setg(errp, "Tray of device '%s' is not open", device);
return;
}
@@ -2384,12 +2394,19 @@ void qmp_blockdev_remove_medium(const char *device, Error **errp)
/* This follows the convention established by bdrv_make_anon() */
if (bs->device_list.tqe_prev) {
QTAILQ_REMOVE(&bdrv_states, bs, device_list);
bs->device_list.tqe_prev = NULL;
bdrv_device_remove(bs);
}
blk_remove_bs(blk);
if (!blk_dev_has_tray(blk)) {
/* For tray-less devices, blockdev-open-tray is a no-op (or may not be
* called at all); therefore, the medium needs to be ejected here.
* Do it after blk_remove_bs() so blk_is_inserted(blk) returns the @load
* value passed here (i.e. false). */
blk_dev_change_media_cb(blk, false);
}
out:
aio_context_release(aio_context);
}
@@ -2415,7 +2432,7 @@ static void qmp_blockdev_insert_anon_medium(const char *device,
return;
}
if (has_device && !blk_dev_is_tray_open(blk)) {
if (has_device && blk_dev_has_tray(blk) && !blk_dev_is_tray_open(blk)) {
error_setg(errp, "Tray of device '%s' is not open", device);
return;
}
@@ -2428,10 +2445,19 @@ static void qmp_blockdev_insert_anon_medium(const char *device,
blk_insert_bs(blk, bs);
QTAILQ_INSERT_TAIL(&bdrv_states, bs, device_list);
if (!blk_dev_has_tray(blk)) {
/* For tray-less devices, blockdev-close-tray is a no-op (or may not be
* called at all); therefore, the medium needs to be pushed into the
* slot here.
* Do it after blk_insert_bs() so blk_is_inserted(blk) returns the @load
* value passed here (i.e. true). */
blk_dev_change_media_cb(blk, true);
}
}
void qmp_blockdev_insert_medium(const char *device, const char *node_name,
Error **errp)
void qmp_x_blockdev_insert_medium(const char *device, const char *node_name,
Error **errp)
{
BlockDriverState *bs;
@@ -2520,7 +2546,7 @@ void qmp_blockdev_change_medium(const char *device, const char *filename,
goto fail;
}
qmp_blockdev_remove_medium(device, &err);
qmp_x_blockdev_remove_medium(device, &err);
if (err) {
error_propagate(errp, err);
goto fail;
+1 -2
View File
@@ -740,8 +740,7 @@ static void padzero(abi_ulong elf_bss, abi_ulong last_bss)
size must be known */
if (qemu_real_host_page_size < qemu_host_page_size) {
abi_ulong end_addr, end_addr1;
end_addr1 = (elf_bss + qemu_real_host_page_size - 1) &
~(qemu_real_host_page_size - 1);
end_addr1 = REAL_HOST_PAGE_ALIGN(elf_bss);
end_addr = HOST_PAGE_ALIGN(elf_bss);
if (end_addr1 < end_addr) {
mmap((void *)g2h(end_addr1), end_addr - end_addr1,
Vendored
+37 -1
View File
@@ -727,6 +727,8 @@ if test "$mingw32" = "yes" ; then
QEMU_CFLAGS="-DWIN32_LEAN_AND_MEAN -DWINVER=0x501 $QEMU_CFLAGS"
# enable C99/POSIX format strings (needs mingw32-runtime 3.15 or later)
QEMU_CFLAGS="-D__USE_MINGW_ANSI_STDIO=1 $QEMU_CFLAGS"
# MinGW needs -mthreads for TLS and macro _MT.
QEMU_CFLAGS="-mthreads $QEMU_CFLAGS"
LIBS="-lwinmm -lws2_32 -liphlpapi $LIBS"
write_c_skeleton;
if compile_prog "" "-liberty" ; then
@@ -1426,6 +1428,9 @@ if compile_object ; then
else
error_exit "\"$cc\" either does not exist or does not work"
fi
if ! compile_prog ; then
error_exit "\"$cc\" cannot build an executable (is your linker broken?)"
fi
# Check that the C++ compiler exists and works with the C compiler
if has $cxx; then
@@ -1486,6 +1491,16 @@ for flag in $gcc_flags; do
done
if test "$stack_protector" != "no"; then
cat > $TMPC << EOF
int main(int argc, char *argv[])
{
char arr[64], *p = arr, *c = argv[0];
while (*c) {
*p++ = *c++;
}
return 0;
}
EOF
gcc_flags="-fstack-protector-strong -fstack-protector-all"
sp_on=0
for flag in $gcc_flags; do
@@ -1946,6 +1961,23 @@ EOF
elif
cat > $TMPC <<EOF &&
#include <xenctrl.h>
#include <stdint.h>
int main(void) {
xc_interface *xc = NULL;
xen_domain_handle_t handle;
xc_domain_create(xc, 0, handle, 0, NULL, NULL);
return 0;
}
EOF
compile_prog "" "$xen_libs"
then
xen_ctrl_version=470
xen=yes
# Xen 4.6
elif
cat > $TMPC <<EOF &&
#include <xenctrl.h>
#include <xenstore.h>
#include <stdint.h>
#include <xen/hvm/hvm_info_table.h>
@@ -4726,7 +4758,11 @@ echo "GTK GL support $gtk_gl"
echo "GNUTLS support $gnutls"
echo "GNUTLS hash $gnutls_hash"
echo "libgcrypt $gcrypt"
echo "nettle $nettle ${nettle+($nettle_version)}"
if test "$nettle" = "yes"; then
echo "nettle $nettle ($nettle_version)"
else
echo "nettle $nettle"
fi
echo "libtasn1 $tasn1"
echo "VTE support $vte"
echo "curses support $curses"
+4 -2
View File
@@ -986,7 +986,7 @@ static void qemu_wait_io_event_common(CPUState *cpu)
if (cpu->stop) {
cpu->stop = false;
cpu->stopped = true;
qemu_cond_signal(&qemu_pause_cond);
qemu_cond_broadcast(&qemu_pause_cond);
}
flush_queued_work(cpu);
cpu->thread_kicked = false;
@@ -1387,7 +1387,7 @@ void cpu_stop_current(void)
current_cpu->stop = false;
current_cpu->stopped = true;
cpu_exit(current_cpu);
qemu_cond_signal(&qemu_pause_cond);
qemu_cond_broadcast(&qemu_pause_cond);
}
}
@@ -1415,6 +1415,8 @@ int vm_stop_force_state(RunState state)
return vm_stop(state);
} else {
runstate_set(state);
bdrv_drain_all();
/* Make sure to return an error if the flush in a previous vm_stop()
* failed. */
return bdrv_flush_all();
+2 -2
View File
@@ -123,10 +123,10 @@ qcrypto_tls_creds_get_path(QCryptoTLSCreds *creds,
goto cleanup;
}
trace_qcrypto_tls_creds_get_path(creds, filename,
*cred ? *cred : "<none>");
ret = 0;
cleanup:
trace_qcrypto_tls_creds_get_path(creds, filename,
*cred ? *cred : "<none>");
return ret;
}
+1
View File
@@ -255,6 +255,7 @@ qcrypto_tls_creds_check_cert_key_purpose(QCryptoTLSCredsX509 *creds,
}
g_free(buffer);
buffer = NULL;
}
if (isServer) {
-2
View File
@@ -1,3 +1 @@
# Default configuration for aarch64-linux-user
CONFIG_GDBSTUB_XML=y
+15 -5
View File
@@ -148,13 +148,23 @@ a feature bit was dedicated for this purpose:
Starting and stopping rings
----------------------
Client must only process each ring when it is both started and enabled.
Client must only process each ring when it is started.
Client must only pass data between the ring and the
backend, when the ring is enabled.
If ring is started but disabled, client must process the
ring without talking to the backend.
For example, for a networking device, in the disabled state
client must not supply any new RX packets, but must process
and discard any TX packets.
If VHOST_USER_F_PROTOCOL_FEATURES has not been negotiated, the ring is initialized
in an enabled state.
If VHOST_USER_F_PROTOCOL_FEATURES has been negotiated, the ring is initialized
in a disabled state. Client must not process it until ring is enabled by
in a disabled state. Client must not pass data to/from the backend until ring is enabled by
VHOST_USER_SET_VRING_ENABLE with parameter 1, or after it has been disabled by
VHOST_USER_SET_VRING_ENABLE with parameter 0.
@@ -166,7 +176,7 @@ descriptor is readable) on the descriptor specified by
VHOST_USER_SET_VRING_KICK, and stop ring upon receiving
VHOST_USER_GET_VRING_BASE.
While processing the rings (when they are started and enabled), client must
While processing the rings (whether they are enabled or not), client must
support changing some configuration aspects on the fly.
Multiple queue support
@@ -309,11 +319,11 @@ Message types
Id: 4
Master payload: N/A
This is no longer used. Used to be sent to request stopping
This is no longer used. Used to be sent to request disabling
all rings, but some clients interpreted it to also discard
connection state (this interpretation would lead to bugs).
It is recommended that clients either ignore this message,
or use it to stop all rings.
or use it to disable all rings.
* VHOST_USER_SET_MEM_TABLE
+3 -7
View File
@@ -51,7 +51,6 @@
#include "qemu/main-loop.h"
#include "translate-all.h"
#include "sysemu/replay.h"
#include "sysemu/qtest.h"
#include "exec/memory-internal.h"
#include "exec/ram_addr.h"
@@ -1065,9 +1064,11 @@ static uint16_t phys_section_add(PhysPageMap *map,
static void phys_section_destroy(MemoryRegion *mr)
{
bool have_sub_page = mr->subpage;
memory_region_unref(mr);
if (mr->subpage) {
if (have_sub_page) {
subpage_t *subpage = container_of(mr, subpage_t, iomem);
object_unref(OBJECT(&subpage->iomem));
g_free(subpage);
@@ -1197,11 +1198,6 @@ static long gethugepagesize(const char *path, Error **errp)
return 0;
}
if (!qtest_driver() &&
fs.f_type != HUGETLBFS_MAGIC) {
fprintf(stderr, "Warning: path not on HugeTLBFS: %s\n", path);
}
return fs.f_bsize;
}
+10 -10
View File
@@ -1128,10 +1128,19 @@ int main(int argc, char **argv)
}
}
if (chdir("/") < 0) {
do_perror("chdir");
goto error;
}
if (chroot(rpath) < 0) {
do_perror("chroot");
goto error;
}
get_version = false;
#ifdef FS_IOC_GETVERSION
/* check whether underlying FS support IOC_GETVERSION */
retval = statfs(rpath, &st_fs);
retval = statfs("/", &st_fs);
if (!retval) {
switch (st_fs.f_type) {
case EXT2_SUPER_MAGIC:
@@ -1144,16 +1153,7 @@ int main(int argc, char **argv)
}
#endif
if (chdir("/") < 0) {
do_perror("chdir");
goto error;
}
if (chroot(rpath) < 0) {
do_perror("chroot");
goto error;
}
umask(0);
if (init_capabilities() < 0) {
goto error;
}
+8 -10
View File
@@ -1734,21 +1734,18 @@ void hmp_sendkey(Monitor *mon, const QDict *qdict)
int has_hold_time = qdict_haskey(qdict, "hold-time");
int hold_time = qdict_get_try_int(qdict, "hold-time", -1);
Error *err = NULL;
char keyname_buf[16];
char *separator;
int keyname_len;
while (1) {
separator = strchr(keys, '-');
keyname_len = separator ? separator - keys : strlen(keys);
pstrcpy(keyname_buf, sizeof(keyname_buf), keys);
/* Be compatible with old interface, convert user inputted "<" */
if (!strncmp(keyname_buf, "<", 1) && keyname_len == 1) {
pstrcpy(keyname_buf, sizeof(keyname_buf), "less");
if (keys[0] == '<' && keyname_len == 1) {
keys = "less";
keyname_len = 4;
}
keyname_buf[keyname_len] = 0;
keylist = g_malloc0(sizeof(*keylist));
keylist->value = g_malloc0(sizeof(*keylist->value));
@@ -1761,16 +1758,17 @@ void hmp_sendkey(Monitor *mon, const QDict *qdict)
}
tmp = keylist;
if (strstart(keyname_buf, "0x", NULL)) {
if (strstart(keys, "0x", NULL)) {
char *endp;
int value = strtoul(keyname_buf, &endp, 0);
if (*endp != '\0') {
int value = strtoul(keys, &endp, 0);
assert(endp <= keys + keyname_len);
if (endp != keys + keyname_len) {
goto err_out;
}
keylist->value->type = KEY_VALUE_KIND_NUMBER;
keylist->value->u.number = value;
} else {
int idx = index_from_key(keyname_buf);
int idx = index_from_key(keys, keyname_len);
if (idx == Q_KEY_CODE_MAX) {
goto err_out;
}
@@ -1792,7 +1790,7 @@ out:
return;
err_out:
monitor_printf(mon, "invalid parameter: %s\n", keyname_buf);
monitor_printf(mon, "invalid parameter: %.*s\n", keyname_len, keys);
goto out;
}
+19 -60
View File
@@ -12,71 +12,30 @@
*
*/
#include "fsdev/qemu-fsdev.h"
#include "qemu/thread.h"
#include "qemu/event_notifier.h"
#include "qemu-common.h"
#include "block/thread-pool.h"
#include "qemu/coroutine.h"
#include "qemu/main-loop.h"
#include "virtio-9p-coth.h"
/* v9fs glib thread pool */
static V9fsThPool v9fs_pool;
/* Called from QEMU I/O thread. */
static void coroutine_enter_cb(void *opaque, int ret)
{
Coroutine *co = opaque;
qemu_coroutine_enter(co, NULL);
}
/* Called from worker thread. */
static int coroutine_enter_func(void *arg)
{
Coroutine *co = arg;
qemu_coroutine_enter(co, NULL);
return 0;
}
void co_run_in_worker_bh(void *opaque)
{
Coroutine *co = opaque;
g_thread_pool_push(v9fs_pool.pool, co, NULL);
}
static void v9fs_qemu_process_req_done(EventNotifier *e)
{
Coroutine *co;
event_notifier_test_and_clear(e);
while ((co = g_async_queue_try_pop(v9fs_pool.completed)) != NULL) {
qemu_coroutine_enter(co, NULL);
}
}
static void v9fs_thread_routine(gpointer data, gpointer user_data)
{
Coroutine *co = data;
qemu_coroutine_enter(co, NULL);
g_async_queue_push(v9fs_pool.completed, co);
event_notifier_set(&v9fs_pool.e);
}
int v9fs_init_worker_threads(void)
{
int ret = 0;
V9fsThPool *p = &v9fs_pool;
sigset_t set, oldset;
sigfillset(&set);
/* Leave signal handling to the iothread. */
pthread_sigmask(SIG_SETMASK, &set, &oldset);
p->pool = g_thread_pool_new(v9fs_thread_routine, p, -1, FALSE, NULL);
if (!p->pool) {
ret = -1;
goto err_out;
}
p->completed = g_async_queue_new();
if (!p->completed) {
/*
* We are going to terminate.
* So don't worry about cleanup
*/
ret = -1;
goto err_out;
}
event_notifier_init(&p->e, 0);
event_notifier_set_handler(&p->e, v9fs_qemu_process_req_done);
err_out:
pthread_sigmask(SIG_SETMASK, &oldset, NULL);
return ret;
thread_pool_submit_aio(aio_get_thread_pool(qemu_get_aio_context()),
coroutine_enter_func, co, coroutine_enter_cb, co);
}
+1 -9
View File
@@ -18,14 +18,6 @@
#include "qemu/thread.h"
#include "qemu/coroutine.h"
#include "virtio-9p.h"
#include <glib.h>
typedef struct V9fsThPool {
EventNotifier e;
GThreadPool *pool;
GAsyncQueue *completed;
} V9fsThPool;
/*
* we want to use bottom half because we want to make sure the below
@@ -45,7 +37,7 @@ typedef struct V9fsThPool {
qemu_bh_schedule(co_bh); \
/* \
* yield in qemu thread and re-enter back \
* in glib worker thread \
* in worker thread \
*/ \
qemu_coroutine_yield(); \
qemu_bh_delete(co_bh); \
+12 -4
View File
@@ -116,10 +116,6 @@ static void virtio_9p_device_realize(DeviceState *dev, Error **errp)
" and export path:%s", s->fsconf.fsdev_id, s->ctx.fs_root);
goto out;
}
if (v9fs_init_worker_threads() < 0) {
error_setg(errp, "worker thread initialization failed");
goto out;
}
/*
* Check details of export path, We need to use fs driver
@@ -149,6 +145,17 @@ out:
v9fs_path_free(&path);
}
static void virtio_9p_device_unrealize(DeviceState *dev, Error **errp)
{
VirtIODevice *vdev = VIRTIO_DEVICE(dev);
V9fsState *s = VIRTIO_9P(dev);
virtio_cleanup(vdev);
unregister_savevm(dev, "virtio-9p", s);
g_free(s->ctx.fs_root);
g_free(s->tag);
}
/* virtio-9p device */
static Property virtio_9p_properties[] = {
@@ -165,6 +172,7 @@ static void virtio_9p_class_init(ObjectClass *klass, void *data)
dc->props = virtio_9p_properties;
set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
vdc->realize = virtio_9p_device_realize;
vdc->unrealize = virtio_9p_device_unrealize;
vdc->get_features = virtio_9p_get_features;
vdc->get_config = virtio_9p_get_config;
}
+1
View File
@@ -155,6 +155,7 @@ static void acpi_memory_hotplug_write(void *opaque, hwaddr addr, uint64_t data,
qapi_event_send_mem_unplug_error(dev->id,
error_get_pretty(local_err),
&error_abort);
error_free(local_err);
break;
}
trace_mhp_acpi_pc_dimm_deleted(mem_st->selector);
+1 -1
View File
@@ -51,7 +51,7 @@ static void xlnx_ep108_init(MachineState *machine)
machine->ram_size = EP108_MAX_RAM_SIZE;
}
if (machine->ram_size <= 0x08000000) {
if (machine->ram_size < 0x08000000) {
qemu_log("WARNING: RAM size " RAM_ADDR_FMT " is small for EP108",
machine->ram_size);
}
+2 -13
View File
@@ -45,7 +45,6 @@ struct VirtIOBlockDataPlane {
* use it).
*/
IOThread *iothread;
IOThread internal_iothread_obj;
AioContext *ctx;
EventNotifier host_notifier; /* doorbell */
@@ -149,14 +148,14 @@ void virtio_blk_data_plane_create(VirtIODevice *vdev, VirtIOBlkConf *conf,
*dataplane = NULL;
if (!conf->data_plane && !conf->iothread) {
if (!conf->iothread) {
return;
}
/* Don't try if transport does not support notifiers. */
if (!k->set_guest_notifiers || !k->set_host_notifier) {
error_setg(errp,
"device is incompatible with x-data-plane "
"device is incompatible with dataplane "
"(transport does not support notifiers)");
return;
}
@@ -179,16 +178,6 @@ void virtio_blk_data_plane_create(VirtIODevice *vdev, VirtIOBlkConf *conf,
if (conf->iothread) {
s->iothread = conf->iothread;
object_ref(OBJECT(s->iothread));
} else {
/* Create per-device IOThread if none specified. This is for
* x-data-plane option compatibility. If x-data-plane is removed we
* can drop this.
*/
object_initialize(&s->internal_iothread_obj,
sizeof(s->internal_iothread_obj),
TYPE_IOTHREAD);
user_creatable_complete(OBJECT(&s->internal_iothread_obj), &error_abort);
s->iothread = &s->internal_iothread_obj;
}
s->ctx = iothread_get_aio_context(s->iothread);
s->bh = aio_bh_new(s->ctx, notify_guest_bh, s);
+1 -1
View File
@@ -712,7 +712,7 @@ static void glue(nand_blk_erase_, PAGE_SIZE)(NANDFlashState *s)
memset(s->storage + (PAGE(addr) << OOB_SHIFT),
0xff, OOB_SIZE << s->erase_shift);
i = SECTOR(addr);
page = SECTOR(addr + (ADDR_SHIFT + s->erase_shift));
page = SECTOR(addr + (1 << (ADDR_SHIFT + s->erase_shift)));
for (; i < page; i ++)
if (blk_write(s->blk, i, iobuf, 1) < 0) {
printf("%s: write error in sector %" PRIu64 "\n", __func__, i);
+3 -5
View File
@@ -72,6 +72,9 @@ static int virtio_blk_handle_rw_error(VirtIOBlockReq *req, int error,
VirtIOBlock *s = req->dev;
if (action == BLOCK_ERROR_ACTION_STOP) {
/* Break the link as the next request is going to be parsed from the
* ring again. Otherwise we may end up doing a double completion! */
req->mr_next = NULL;
req->next = s->rq;
s->rq = req;
} else if (action == BLOCK_ERROR_ACTION_REPORT) {
@@ -112,10 +115,6 @@ static void virtio_blk_rw_complete(void *opaque, int ret)
* happen on the other side of the migration).
*/
if (virtio_blk_handle_rw_error(req, -ret, is_read)) {
/* Break the link in case the next request is added to the
* restart queue and is going to be parsed from the ring again.
*/
req->mr_next = NULL;
continue;
}
}
@@ -987,7 +986,6 @@ static Property virtio_blk_properties[] = {
#endif
DEFINE_PROP_BIT("request-merging", VirtIOBlock, conf.request_merging, 0,
true),
DEFINE_PROP_BIT("x-data-plane", VirtIOBlock, conf.data_plane, 0, false),
DEFINE_PROP_END_OF_LIST(),
};
+8 -4
View File
@@ -85,8 +85,10 @@ static inline void blkif_get_x86_32_req(blkif_request_t *dst, blkif_x86_32_reque
d->nr_sectors = s->nr_sectors;
return;
}
if (n > src->nr_segments)
n = src->nr_segments;
/* prevent the compiler from optimizing the code and using src->nr_segments instead */
barrier();
if (n > dst->nr_segments)
n = dst->nr_segments;
for (i = 0; i < n; i++)
dst->seg[i] = src->seg[i];
}
@@ -106,8 +108,10 @@ static inline void blkif_get_x86_64_req(blkif_request_t *dst, blkif_x86_64_reque
d->nr_sectors = s->nr_sectors;
return;
}
if (n > src->nr_segments)
n = src->nr_segments;
/* prevent the compiler from optimizing the code and using src->nr_segments instead */
barrier();
if (n > dst->nr_segments)
n = dst->nr_segments;
for (i = 0; i < n; i++)
dst->seg[i] = src->seg[i];
}
-8
View File
@@ -75,7 +75,6 @@ struct ioreq {
off_t start;
QEMUIOVector v;
int presync;
int postsync;
uint8_t mapped;
/* grant mapping */
@@ -144,7 +143,6 @@ static void ioreq_reset(struct ioreq *ioreq)
ioreq->status = 0;
ioreq->start = 0;
ioreq->presync = 0;
ioreq->postsync = 0;
ioreq->mapped = 0;
memset(ioreq->domids, 0, sizeof(ioreq->domids));
@@ -520,12 +518,6 @@ static void qemu_aio_complete(void *opaque, int ret)
if (ioreq->aio_inflight > 0) {
return;
}
if (ioreq->postsync) {
ioreq->postsync = 0;
ioreq->aio_inflight++;
blk_aio_flush(ioreq->blkdev->blk, qemu_aio_complete, ioreq);
return;
}
ioreq->status = ioreq->aio_errors ? BLKIF_RSP_ERROR : BLKIF_RSP_OKAY;
ioreq_unmap(ioreq);
+1 -1
View File
@@ -42,7 +42,7 @@ struct bt_l2cap_sdp_state_s {
static ssize_t sdp_datalen(const uint8_t **element, ssize_t *left)
{
size_t len = *(*element) ++ & SDP_DSIZE_MASK;
uint32_t len = *(*element) ++ & SDP_DSIZE_MASK;
if (!*left)
return -1;
+3
View File
@@ -374,6 +374,9 @@ static void uart_write(void *opaque, hwaddr offset,
DB_PRINT(" offset:%x data:%08x\n", (unsigned)offset, (unsigned)value);
offset >>= 2;
if (offset >= CADENCE_UART_R_MAX) {
return;
}
switch (offset) {
case R_IER: /* ier (wts imr) */
s->r[R_IMR] |= value;
+21
View File
@@ -283,6 +283,21 @@ static bool machine_get_suppress_vmdesc(Object *obj, Error **errp)
return ms->suppress_vmdesc;
}
static void machine_set_enforce_config_section(Object *obj, bool value,
Error **errp)
{
MachineState *ms = MACHINE(obj);
ms->enforce_config_section = value;
}
static bool machine_get_enforce_config_section(Object *obj, Error **errp)
{
MachineState *ms = MACHINE(obj);
return ms->enforce_config_section;
}
static int error_on_sysbus_device(SysBusDevice *sbdev, void *opaque)
{
error_report("Option '-device %s' cannot be handled by this machine",
@@ -437,6 +452,12 @@ static void machine_initfn(Object *obj)
object_property_set_description(obj, "suppress-vmdesc",
"Set on to disable self-describing migration",
NULL);
object_property_add_bool(obj, "enforce-config-section",
machine_get_enforce_config_section,
machine_set_enforce_config_section, NULL);
object_property_set_description(obj, "enforce-config-section",
"Set on to enforce configuration section migration",
NULL);
/* Register notifier when init is done for sysbus sanity checks */
ms->sysbus_notifier.notify = machine_init_notify;
+78 -44
View File
@@ -140,6 +140,13 @@ static uint32_t expand4[256];
static uint16_t expand2[256];
static uint8_t expand4to8[16];
static void vbe_update_vgaregs(VGACommonState *s);
static inline bool vbe_enabled(VGACommonState *s)
{
return s->vbe_regs[VBE_DISPI_INDEX_ENABLE] & VBE_DISPI_ENABLED;
}
static void vga_update_memory_access(VGACommonState *s)
{
hwaddr base, offset, size;
@@ -177,6 +184,7 @@ static void vga_update_memory_access(VGACommonState *s)
size = 0x8000;
break;
}
assert(offset + size <= s->vram_size);
memory_region_init_alias(&s->chain4_alias, memory_region_owner(&s->vram),
"vga.chain4", &s->vram, offset, size);
memory_region_add_subregion_overlap(s->legacy_address_space, base,
@@ -476,6 +484,7 @@ void vga_ioport_write(void *opaque, uint32_t addr, uint32_t val)
printf("vga: write SR%x = 0x%02x\n", s->sr_index, val);
#endif
s->sr[s->sr_index] = val & sr_mask[s->sr_index];
vbe_update_vgaregs(s);
if (s->sr_index == VGA_SEQ_CLOCK_MODE) {
s->update_retrace_info(s);
}
@@ -507,6 +516,7 @@ void vga_ioport_write(void *opaque, uint32_t addr, uint32_t val)
printf("vga: write GR%x = 0x%02x\n", s->gr_index, val);
#endif
s->gr[s->gr_index] = val & gr_mask[s->gr_index];
vbe_update_vgaregs(s);
vga_update_memory_access(s);
break;
case VGA_CRT_IM:
@@ -525,10 +535,12 @@ void vga_ioport_write(void *opaque, uint32_t addr, uint32_t val)
if (s->cr_index == VGA_CRTC_OVERFLOW) {
s->cr[VGA_CRTC_OVERFLOW] = (s->cr[VGA_CRTC_OVERFLOW] & ~0x10) |
(val & 0x10);
vbe_update_vgaregs(s);
}
return;
}
s->cr[s->cr_index] = val;
vbe_update_vgaregs(s);
switch(s->cr_index) {
case VGA_CRTC_H_TOTAL:
@@ -561,7 +573,7 @@ static void vbe_fixup_regs(VGACommonState *s)
uint16_t *r = s->vbe_regs;
uint32_t bits, linelength, maxy, offset;
if (!(r[VBE_DISPI_INDEX_ENABLE] & VBE_DISPI_ENABLED)) {
if (!vbe_enabled(s)) {
/* vbe is turned off -- nothing to do */
return;
}
@@ -636,6 +648,49 @@ static void vbe_fixup_regs(VGACommonState *s)
s->vbe_start_addr = offset / 4;
}
/* we initialize the VGA graphic mode */
static void vbe_update_vgaregs(VGACommonState *s)
{
int h, shift_control;
if (!vbe_enabled(s)) {
/* vbe is turned off -- nothing to do */
return;
}
/* graphic mode + memory map 1 */
s->gr[VGA_GFX_MISC] = (s->gr[VGA_GFX_MISC] & ~0x0c) | 0x04 |
VGA_GR06_GRAPHICS_MODE;
s->cr[VGA_CRTC_MODE] |= 3; /* no CGA modes */
s->cr[VGA_CRTC_OFFSET] = s->vbe_line_offset >> 3;
/* width */
s->cr[VGA_CRTC_H_DISP] =
(s->vbe_regs[VBE_DISPI_INDEX_XRES] >> 3) - 1;
/* height (only meaningful if < 1024) */
h = s->vbe_regs[VBE_DISPI_INDEX_YRES] - 1;
s->cr[VGA_CRTC_V_DISP_END] = h;
s->cr[VGA_CRTC_OVERFLOW] = (s->cr[VGA_CRTC_OVERFLOW] & ~0x42) |
((h >> 7) & 0x02) | ((h >> 3) & 0x40);
/* line compare to 1023 */
s->cr[VGA_CRTC_LINE_COMPARE] = 0xff;
s->cr[VGA_CRTC_OVERFLOW] |= 0x10;
s->cr[VGA_CRTC_MAX_SCAN] |= 0x40;
if (s->vbe_regs[VBE_DISPI_INDEX_BPP] == 4) {
shift_control = 0;
s->sr[VGA_SEQ_CLOCK_MODE] &= ~8; /* no double line */
} else {
shift_control = 2;
/* set chain 4 mode */
s->sr[VGA_SEQ_MEMORY_MODE] |= VGA_SR04_CHN_4M;
/* activate all planes */
s->sr[VGA_SEQ_PLANE_WRITE] |= VGA_SR02_ALL_PLANES;
}
s->gr[VGA_GFX_MODE] = (s->gr[VGA_GFX_MODE] & ~0x60) |
(shift_control << 5);
s->cr[VGA_CRTC_MAX_SCAN] &= ~0x9f; /* no double scan */
}
static uint32_t vbe_ioport_read_index(void *opaque, uint32_t addr)
{
VGACommonState *s = opaque;
@@ -712,13 +767,10 @@ void vbe_ioport_write_data(void *opaque, uint32_t addr, uint32_t val)
case VBE_DISPI_INDEX_Y_OFFSET:
s->vbe_regs[s->vbe_index] = val;
vbe_fixup_regs(s);
vbe_update_vgaregs(s);
break;
case VBE_DISPI_INDEX_BANK:
if (s->vbe_regs[VBE_DISPI_INDEX_BPP] == 4) {
val &= (s->vbe_bank_mask >> 2);
} else {
val &= s->vbe_bank_mask;
}
val &= s->vbe_bank_mask;
s->vbe_regs[s->vbe_index] = val;
s->bank_offset = (val << 16);
vga_update_memory_access(s);
@@ -726,52 +778,19 @@ void vbe_ioport_write_data(void *opaque, uint32_t addr, uint32_t val)
case VBE_DISPI_INDEX_ENABLE:
if ((val & VBE_DISPI_ENABLED) &&
!(s->vbe_regs[VBE_DISPI_INDEX_ENABLE] & VBE_DISPI_ENABLED)) {
int h, shift_control;
s->vbe_regs[VBE_DISPI_INDEX_VIRT_WIDTH] = 0;
s->vbe_regs[VBE_DISPI_INDEX_X_OFFSET] = 0;
s->vbe_regs[VBE_DISPI_INDEX_Y_OFFSET] = 0;
s->vbe_regs[VBE_DISPI_INDEX_ENABLE] |= VBE_DISPI_ENABLED;
vbe_fixup_regs(s);
vbe_update_vgaregs(s);
/* clear the screen */
if (!(val & VBE_DISPI_NOCLEARMEM)) {
memset(s->vram_ptr, 0,
s->vbe_regs[VBE_DISPI_INDEX_YRES] * s->vbe_line_offset);
}
/* we initialize the VGA graphic mode */
/* graphic mode + memory map 1 */
s->gr[VGA_GFX_MISC] = (s->gr[VGA_GFX_MISC] & ~0x0c) | 0x04 |
VGA_GR06_GRAPHICS_MODE;
s->cr[VGA_CRTC_MODE] |= 3; /* no CGA modes */
s->cr[VGA_CRTC_OFFSET] = s->vbe_line_offset >> 3;
/* width */
s->cr[VGA_CRTC_H_DISP] =
(s->vbe_regs[VBE_DISPI_INDEX_XRES] >> 3) - 1;
/* height (only meaningful if < 1024) */
h = s->vbe_regs[VBE_DISPI_INDEX_YRES] - 1;
s->cr[VGA_CRTC_V_DISP_END] = h;
s->cr[VGA_CRTC_OVERFLOW] = (s->cr[VGA_CRTC_OVERFLOW] & ~0x42) |
((h >> 7) & 0x02) | ((h >> 3) & 0x40);
/* line compare to 1023 */
s->cr[VGA_CRTC_LINE_COMPARE] = 0xff;
s->cr[VGA_CRTC_OVERFLOW] |= 0x10;
s->cr[VGA_CRTC_MAX_SCAN] |= 0x40;
if (s->vbe_regs[VBE_DISPI_INDEX_BPP] == 4) {
shift_control = 0;
s->sr[VGA_SEQ_CLOCK_MODE] &= ~8; /* no double line */
} else {
shift_control = 2;
/* set chain 4 mode */
s->sr[VGA_SEQ_MEMORY_MODE] |= VGA_SR04_CHN_4M;
/* activate all planes */
s->sr[VGA_SEQ_PLANE_WRITE] |= VGA_SR02_ALL_PLANES;
}
s->gr[VGA_GFX_MODE] = (s->gr[VGA_GFX_MODE] & ~0x60) |
(shift_control << 5);
s->cr[VGA_CRTC_MAX_SCAN] &= ~0x9f; /* no double scan */
} else {
s->bank_offset = 0;
}
@@ -817,13 +836,21 @@ uint32_t vga_mem_readb(VGACommonState *s, hwaddr addr)
if (s->sr[VGA_SEQ_MEMORY_MODE] & VGA_SR04_CHN_4M) {
/* chain 4 mode : simplest access */
assert(addr < s->vram_size);
ret = s->vram_ptr[addr];
} else if (s->gr[VGA_GFX_MODE] & 0x10) {
/* odd/even mode (aka text mode mapping) */
plane = (s->gr[VGA_GFX_PLANE_READ] & 2) | (addr & 1);
ret = s->vram_ptr[((addr & ~1) << 1) | plane];
addr = ((addr & ~1) << 1) | plane;
if (addr >= s->vram_size) {
return 0xff;
}
ret = s->vram_ptr[addr];
} else {
/* standard VGA latched access */
if (addr * sizeof(uint32_t) >= s->vram_size) {
return 0xff;
}
s->latch = ((uint32_t *)s->vram_ptr)[addr];
if (!(s->gr[VGA_GFX_MODE] & 0x08)) {
@@ -880,6 +907,7 @@ void vga_mem_writeb(VGACommonState *s, hwaddr addr, uint32_t val)
plane = addr & 3;
mask = (1 << plane);
if (s->sr[VGA_SEQ_PLANE_WRITE] & mask) {
assert(addr < s->vram_size);
s->vram_ptr[addr] = val;
#ifdef DEBUG_VGA_MEM
printf("vga: chain4: [0x" TARGET_FMT_plx "]\n", addr);
@@ -893,6 +921,9 @@ void vga_mem_writeb(VGACommonState *s, hwaddr addr, uint32_t val)
mask = (1 << plane);
if (s->sr[VGA_SEQ_PLANE_WRITE] & mask) {
addr = ((addr & ~1) << 1) | plane;
if (addr >= s->vram_size) {
return;
}
s->vram_ptr[addr] = val;
#ifdef DEBUG_VGA_MEM
printf("vga: odd/even: [0x" TARGET_FMT_plx "]\n", addr);
@@ -966,6 +997,9 @@ void vga_mem_writeb(VGACommonState *s, hwaddr addr, uint32_t val)
mask = s->sr[VGA_SEQ_PLANE_WRITE];
s->plane_updated |= mask; /* only used to detect font change */
write_mask = mask16[mask];
if (addr * sizeof(uint32_t) >= s->vram_size) {
return;
}
((uint32_t *)s->vram_ptr)[addr] =
(((uint32_t *)s->vram_ptr)[addr] & ~write_mask) |
(val & write_mask);
@@ -1044,7 +1078,7 @@ static void vga_get_offsets(VGACommonState *s,
{
uint32_t start_addr, line_offset, line_compare;
if (s->vbe_regs[VBE_DISPI_INDEX_ENABLE] & VBE_DISPI_ENABLED) {
if (vbe_enabled(s)) {
line_offset = s->vbe_line_offset;
start_addr = s->vbe_start_addr;
line_compare = 65535;
@@ -1369,7 +1403,7 @@ static int vga_get_bpp(VGACommonState *s)
{
int ret;
if (s->vbe_regs[VBE_DISPI_INDEX_ENABLE] & VBE_DISPI_ENABLED) {
if (vbe_enabled(s)) {
ret = s->vbe_regs[VBE_DISPI_INDEX_BPP];
} else {
ret = 0;
@@ -1381,7 +1415,7 @@ static void vga_get_resolution(VGACommonState *s, int *pwidth, int *pheight)
{
int width, height;
if (s->vbe_regs[VBE_DISPI_INDEX_ENABLE] & VBE_DISPI_ENABLED) {
if (vbe_enabled(s)) {
width = s->vbe_regs[VBE_DISPI_INDEX_XRES];
height = s->vbe_regs[VBE_DISPI_INDEX_YRES];
} else {
+6 -4
View File
@@ -784,18 +784,20 @@ static void xenfb_invalidate(void *opaque)
static void xenfb_handle_events(struct XenFB *xenfb)
{
uint32_t prod, cons;
uint32_t prod, cons, out_cons;
struct xenfb_page *page = xenfb->c.page;
prod = page->out_prod;
if (prod == page->out_cons)
out_cons = page->out_cons;
if (prod == out_cons)
return;
xen_rmb(); /* ensure we see ring contents up to prod */
for (cons = page->out_cons; cons != prod; cons++) {
for (cons = out_cons; cons != prod; cons++) {
union xenfb_out_event *event = &XENFB_OUT_RING_REF(page, cons);
uint8_t type = event->type;
int x, y, w, h;
switch (event->type) {
switch (type) {
case XENFB_TYPE_UPDATE:
if (xenfb->up_count == UP_QUEUE)
xenfb->up_fullscreen = 1;
+10 -5
View File
@@ -634,13 +634,18 @@ static int vapic_prepare(VAPICROMState *s)
static void vapic_write(void *opaque, hwaddr addr, uint64_t data,
unsigned int size)
{
CPUState *cs = current_cpu;
X86CPU *cpu = X86_CPU(cs);
CPUX86State *env = &cpu->env;
hwaddr rom_paddr;
VAPICROMState *s = opaque;
X86CPU *cpu;
CPUX86State *env;
hwaddr rom_paddr;
cpu_synchronize_state(cs);
if (!current_cpu) {
return;
}
cpu_synchronize_state(current_cpu);
cpu = X86_CPU(current_cpu);
env = &cpu->env;
/*
* The VAPIC supports two PIO-based hypercalls, both via port 0x7E.
-1
View File
@@ -472,7 +472,6 @@ static void pc_i440fx_machine_options(MachineClass *m)
static void pc_i440fx_2_5_machine_options(MachineClass *m)
{
pc_i440fx_machine_options(m);
m->hw_version = QEMU_VERSION;
m->alias = "pc";
m->is_default = 1;
}
-1
View File
@@ -373,7 +373,6 @@ static void pc_q35_machine_options(MachineClass *m)
static void pc_q35_2_5_machine_options(MachineClass *m)
{
pc_q35_machine_options(m);
m->hw_version = QEMU_VERSION;
m->alias = "q35";
}
+9
View File
@@ -661,6 +661,10 @@ static bool ahci_map_fis_address(AHCIDevice *ad)
static void ahci_unmap_fis_address(AHCIDevice *ad)
{
if (ad->res_fis == NULL) {
DPRINTF(ad->port_no, "Attempt to unmap NULL FIS address\n");
return;
}
dma_memory_unmap(ad->hba->as, ad->res_fis, 256,
DMA_DIRECTION_FROM_DEVICE, 256);
ad->res_fis = NULL;
@@ -677,6 +681,10 @@ static bool ahci_map_clb_address(AHCIDevice *ad)
static void ahci_unmap_clb_address(AHCIDevice *ad)
{
if (ad->lst == NULL) {
DPRINTF(ad->port_no, "Attempt to unmap NULL CLB address\n");
return;
}
dma_memory_unmap(ad->hba->as, ad->lst, 1024,
DMA_DIRECTION_FROM_DEVICE, 1024);
ad->lst = NULL;
@@ -910,6 +918,7 @@ static void ncq_err(NCQTransferState *ncq_tfs)
ide_state->error = ABRT_ERR;
ide_state->status = READY_STAT | ERR_STAT;
ncq_tfs->drive->port_regs.scr_err |= (1 << ncq_tfs->tag);
ncq_tfs->used = 0;
}
static void ncq_finish(NCQTransferState *ncq_tfs)
+5 -3
View File
@@ -148,17 +148,18 @@ static void cd_read_sector_cb(void *opaque, int ret)
{
IDEState *s = opaque;
block_acct_done(blk_get_stats(s->blk), &s->acct);
#ifdef DEBUG_IDE_ATAPI
printf("cd_read_sector_cb: lba=%d ret=%d\n", s->lba, ret);
#endif
if (ret < 0) {
block_acct_failed(blk_get_stats(s->blk), &s->acct);
ide_atapi_io_error(s, ret);
return;
}
block_acct_done(blk_get_stats(s->blk), &s->acct);
if (s->cd_sector_size == 2352) {
cd_data_to_raw(s->io_buffer, s->lba);
}
@@ -173,6 +174,7 @@ static void cd_read_sector_cb(void *opaque, int ret)
static int cd_read_sector(IDEState *s)
{
if (s->cd_sector_size != 2048 && s->cd_sector_size != 2352) {
block_acct_invalid(blk_get_stats(s->blk), BLOCK_ACCT_READ);
return -EINVAL;
}
@@ -441,7 +443,7 @@ eot:
if (ret < 0) {
block_acct_failed(blk_get_stats(s->blk), &s->acct);
} else {
block_acct_done(blk_get_stats(s->blk), &s->acct);
block_acct_done(blk_get_stats(s->blk), &s->acct);
}
ide_set_inactive(s, false);
}
+2 -1
View File
@@ -275,7 +275,8 @@ static void check_reserved_space (hwaddr *start,
static void gt64120_isd_mapping(GT64120State *s)
{
hwaddr start = s->regs[GT_ISD] << 21;
/* Bits 14:0 of ISD map to bits 35:21 of the start address. */
hwaddr start = ((hwaddr)s->regs[GT_ISD] << 21) & 0xFFFE00000ull;
hwaddr length = 0x1000;
if (s->ISD_length) {
+6 -10
View File
@@ -60,8 +60,6 @@
#define IVSHMEM(obj) \
OBJECT_CHECK(IVShmemState, (obj), TYPE_IVSHMEM)
#define IVSHMEM_MEMDEV_PROP "memdev"
typedef struct Peer {
int nb_eventfds;
EventNotifier *eventfds;
@@ -352,17 +350,14 @@ static void ivshmem_vector_poll(PCIDevice *dev,
}
}
static CharDriverState* create_eventfd_chr_device(void * opaque, EventNotifier *n,
static CharDriverState* create_eventfd_chr_device(IVShmemState *s,
EventNotifier *n,
int vector)
{
/* create a event character device based on the passed eventfd */
IVShmemState *s = opaque;
PCIDevice *pdev = PCI_DEVICE(s);
int eventfd = event_notifier_get_fd(n);
CharDriverState *chr;
s->msi_vectors[vector].pdev = pdev;
chr = qemu_chr_open_eventfd(eventfd);
if (chr == NULL) {
@@ -857,8 +852,8 @@ static void pci_ivshmem_realize(PCIDevice *dev, Error **errp)
PCI_BASE_ADDRESS_MEM_PREFETCH;
if (!!s->server_chr + !!s->shmobj + !!s->hostmem != 1) {
error_setg(errp, "You must specify either a shmobj, a chardev"
" or a hostmem");
error_setg(errp,
"You must specify either 'shm', 'chardev' or 'x-memdev'");
return;
}
@@ -939,6 +934,7 @@ static void pci_ivshmem_realize(PCIDevice *dev, Error **errp)
memory_region_add_subregion(&s->bar, 0, mr);
pci_register_bar(PCI_DEVICE(s), 2, attr, &s->bar);
} else if (s->server_chr != NULL) {
/* FIXME do not rely on what chr drivers put into filename */
if (strncmp(s->server_chr->filename, "unix:", 5)) {
error_setg(errp, "chardev is not a unix client socket");
return;
@@ -1181,7 +1177,7 @@ static void ivshmem_init(Object *obj)
{
IVShmemState *s = IVSHMEM(obj);
object_property_add_link(obj, IVSHMEM_MEMDEV_PROP, TYPE_MEMORY_BACKEND,
object_property_add_link(obj, "x-memdev", TYPE_MEMORY_BACKEND,
(Object **)&s->hostmem,
ivshmem_check_memdev_is_busy,
OBJ_PROP_LINK_UNREF_ON_RELEASE,
+1 -1
View File
@@ -557,7 +557,6 @@ void DBDMA_register_channel(void *dbdma, int nchan, qemu_irq irq,
DBDMA_DPRINTF("DBDMA_register_channel 0x%x\n", nchan);
ch->irq = irq;
ch->channel = nchan;
ch->rw = rw;
ch->flush = flush;
ch->io.opaque = opaque;
@@ -753,6 +752,7 @@ void* DBDMA_init (MemoryRegion **dbdma_mem)
for (i = 0; i < DBDMA_CHANNELS; i++) {
DBDMA_io *io = &s->channels[i].io;
qemu_iovec_init(&io->iov, 1);
s->channels[i].channel = i;
}
memory_region_init_io(&s->mem, NULL, &dbdma_ops, s, "dbdma", 0x1000);
+9 -2
View File
@@ -447,6 +447,11 @@ static void e1000_reset(void *opaque)
e1000_link_down(d);
}
/* Throttle interrupts to prevent guest (e.g Win 2012) from
* reinjecting interrupts endlessly. TODO: fix non ITR case.
*/
d->mac_reg[ITR] = 250;
/* Some guests expect pre-initialized RAH/RAL (AddrValid flag + MACaddr) */
d->mac_reg[RA] = 0;
d->mac_reg[RA + 1] = E1000_RAH_AV;
@@ -903,7 +908,8 @@ start_xmit(E1000State *s)
* bogus values to TDT/TDLEN.
* there's nothing too intelligent we could do about this.
*/
if (s->mac_reg[TDH] == tdh_start) {
if (s->mac_reg[TDH] == tdh_start ||
tdh_start >= s->mac_reg[TDLEN] / sizeof(desc)) {
DBGOUT(TXERR, "TDH wraparound @%x, TDT %x, TDLEN %x\n",
tdh_start, s->mac_reg[TDT], s->mac_reg[TDLEN]);
break;
@@ -1160,7 +1166,8 @@ e1000_receive_iov(NetClientState *nc, const struct iovec *iov, int iovcnt)
if (++s->mac_reg[RDH] * sizeof(desc) >= s->mac_reg[RDLEN])
s->mac_reg[RDH] = 0;
/* see comment in start_xmit; same here */
if (s->mac_reg[RDH] == rdh_start) {
if (s->mac_reg[RDH] == rdh_start ||
rdh_start >= s->mac_reg[RDLEN] / sizeof(desc)) {
DBGOUT(RXERR, "RDH wraparound @%x, RDT %x, RDLEN %x\n",
rdh_start, s->mac_reg[RDT], s->mac_reg[RDLEN]);
set_ics(s, 0, E1000_ICS_RXO);
+16
View File
@@ -774,6 +774,11 @@ static void tx_command(EEPRO100State *s)
#if 0
uint16_t tx_buffer_el = lduw_le_pci_dma(&s->dev, tbd_address + 6);
#endif
if (tx_buffer_size == 0) {
/* Prevent an endless loop. */
logout("loop in %s:%u\n", __FILE__, __LINE__);
break;
}
tbd_address += 8;
TRACE(RXTX, logout
("TBD (simplified mode): buffer address 0x%08x, size 0x%04x\n",
@@ -855,6 +860,10 @@ static void set_multicast_list(EEPRO100State *s)
static void action_command(EEPRO100State *s)
{
/* The loop below won't stop if it gets special handcrafted data.
Therefore we limit the number of iterations. */
unsigned max_loop_count = 16;
for (;;) {
bool bit_el;
bool bit_s;
@@ -870,6 +879,13 @@ static void action_command(EEPRO100State *s)
#if 0
bool bit_sf = ((s->tx.command & COMMAND_SF) != 0);
#endif
if (max_loop_count-- == 0) {
/* Prevent an endless loop. */
logout("loop in %s:%u\n", __FILE__, __LINE__);
break;
}
s->cu_offset = s->tx.link;
TRACE(OTHER,
logout("val=(cu start), status=0x%04x, command=0x%04x, link=0x%08x\n",
+13 -7
View File
@@ -56,6 +56,8 @@ do { fprintf(stderr, "lan9118: error: " fmt , ## __VA_ARGS__);} while (0)
#define CSR_E2P_CMD 0xb0
#define CSR_E2P_DATA 0xb4
#define E2P_CMD_MAC_ADDR_LOADED 0x100
/* IRQ_CFG */
#define IRQ_INT 0x00001000
#define IRQ_EN 0x00000100
@@ -352,14 +354,14 @@ static void lan9118_reload_eeprom(lan9118_state *s)
{
int i;
if (s->eeprom[0] != 0xa5) {
s->e2p_cmd &= ~0x10;
s->e2p_cmd &= ~E2P_CMD_MAC_ADDR_LOADED;
DPRINTF("MACADDR load failed\n");
return;
}
for (i = 0; i < 6; i++) {
s->conf.macaddr.a[i] = s->eeprom[i + 1];
}
s->e2p_cmd |= 0x10;
s->e2p_cmd |= E2P_CMD_MAC_ADDR_LOADED;
DPRINTF("MACADDR loaded from eeprom\n");
lan9118_mac_changed(s);
}
@@ -902,7 +904,8 @@ static void do_mac_write(lan9118_state *s, int reg, uint32_t val)
*/
break;
default:
hw_error("lan9118: Unimplemented MAC register write: %d = 0x%x\n",
qemu_log_mask(LOG_GUEST_ERROR,
"lan9118: Unimplemented MAC register write: %d = 0x%x\n",
s->mac_cmd & 0xf, val);
}
}
@@ -930,14 +933,16 @@ static uint32_t do_mac_read(lan9118_state *s, int reg)
case MAC_FLOW:
return s->mac_flow;
default:
hw_error("lan9118: Unimplemented MAC register read: %d\n",
qemu_log_mask(LOG_GUEST_ERROR,
"lan9118: Unimplemented MAC register read: %d\n",
s->mac_cmd & 0xf);
return 0;
}
}
static void lan9118_eeprom_cmd(lan9118_state *s, int cmd, int addr)
{
s->e2p_cmd = (s->e2p_cmd & 0x10) | (cmd << 28) | addr;
s->e2p_cmd = (s->e2p_cmd & E2P_CMD_MAC_ADDR_LOADED) | (cmd << 28) | addr;
switch (cmd) {
case 0:
s->e2p_data = s->eeprom[addr];
@@ -1128,7 +1133,8 @@ static void lan9118_writel(void *opaque, hwaddr offset,
break;
default:
hw_error("lan9118_write: Bad reg 0x%x = %x\n", (int)offset, (int)val);
qemu_log_mask(LOG_GUEST_ERROR, "lan9118_write: Bad reg 0x%x = %x\n",
(int)offset, (int)val);
break;
}
lan9118_update(s);
@@ -1246,7 +1252,7 @@ static uint64_t lan9118_readl(void *opaque, hwaddr offset,
case CSR_E2P_DATA:
return s->e2p_data;
}
hw_error("lan9118_read: Bad reg 0x%x\n", (int)offset);
qemu_log_mask(LOG_GUEST_ERROR, "lan9118_read: Bad reg 0x%x\n", (int)offset);
return 0;
}
+10 -4
View File
@@ -154,6 +154,10 @@ static int ne2000_buffer_full(NE2000State *s)
{
int avail, index, boundary;
if (s->stop <= s->start) {
return 1;
}
index = s->curpag << 8;
boundary = s->boundary << 8;
if (index < boundary)
@@ -467,8 +471,9 @@ static inline void ne2000_mem_writel(NE2000State *s, uint32_t addr,
uint32_t val)
{
addr &= ~1; /* XXX: check exact behaviour if not even */
if (addr < 32 ||
(addr >= NE2000_PMEM_START && addr < NE2000_MEM_SIZE)) {
if (addr < 32
|| (addr >= NE2000_PMEM_START
&& addr + sizeof(uint32_t) <= NE2000_MEM_SIZE)) {
stl_le_p(s->mem + addr, val);
}
}
@@ -497,8 +502,9 @@ static inline uint32_t ne2000_mem_readw(NE2000State *s, uint32_t addr)
static inline uint32_t ne2000_mem_readl(NE2000State *s, uint32_t addr)
{
addr &= ~1; /* XXX: check exact behaviour if not even */
if (addr < 32 ||
(addr >= NE2000_PMEM_START && addr < NE2000_MEM_SIZE)) {
if (addr < 32
|| (addr >= NE2000_PMEM_START
&& addr + sizeof(uint32_t) <= NE2000_MEM_SIZE)) {
return ldl_le_p(s->mem + addr);
} else {
return 0xffffffff;
+11 -3
View File
@@ -1064,6 +1064,12 @@ ssize_t pcnet_receive(NetClientState *nc, const uint8_t *buf, size_t size_)
int pktcount = 0;
if (!s->looptest) {
if (size > 4092) {
#ifdef PCNET_DEBUG_RMD
fprintf(stderr, "pcnet: truncates rx packet.\n");
#endif
size = 4092;
}
memcpy(src, buf, size);
/* no need to compute the CRC */
src[size] = 0;
@@ -1084,7 +1090,7 @@ ssize_t pcnet_receive(NetClientState *nc, const uint8_t *buf, size_t size_)
uint32_t fcs = ~0;
uint8_t *p = src;
while (p != &src[size-4])
while (p != &src[size])
CRC(fcs, *p++);
crc_err = (*(uint32_t *)p != htonl(fcs));
}
@@ -1233,8 +1239,10 @@ static void pcnet_transmit(PCNetState *s)
bcnt = 4096 - GET_FIELD(tmd.length, TMDL, BCNT);
/* if multi-tmd packet outsizes s->buffer then skip it silently.
Note: this is not what real hw does */
if (s->xmit_pos + bcnt > sizeof(s->buffer)) {
* Note: this is not what real hw does.
* Last four bytes of s->buffer are used to store CRC FCS code.
*/
if (s->xmit_pos + bcnt > sizeof(s->buffer) - 4) {
s->xmit_pos = -1;
goto txdone;
}
+4 -4
View File
@@ -232,6 +232,9 @@ static int tx_consume(Rocker *r, DescInfo *info)
frag_addr = rocker_tlv_get_le64(tlvs[ROCKER_TLV_TX_FRAG_ATTR_ADDR]);
frag_len = rocker_tlv_get_le16(tlvs[ROCKER_TLV_TX_FRAG_ATTR_LEN]);
if (iovcnt >= ROCKER_TX_FRAGS_MAX) {
goto err_too_many_frags;
}
iov[iovcnt].iov_len = frag_len;
iov[iovcnt].iov_base = g_malloc(frag_len);
if (!iov[iovcnt].iov_base) {
@@ -244,10 +247,7 @@ static int tx_consume(Rocker *r, DescInfo *info)
err = -ROCKER_ENXIO;
goto err_bad_io;
}
if (++iovcnt > ROCKER_TX_FRAGS_MAX) {
goto err_too_many_frags;
}
iovcnt++;
}
if (iovcnt) {
+11 -12
View File
@@ -300,21 +300,19 @@ int vhost_net_start(VirtIODevice *dev, NetClientState *ncs,
BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(dev)));
VirtioBusState *vbus = VIRTIO_BUS(qbus);
VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(vbus);
int r, e, i;
int r, e, i, j;
if (!k->set_guest_notifiers) {
error_report("binding does not support guest notifiers");
r = -ENOSYS;
goto err;
return -ENOSYS;
}
r = vhost_net_set_vnet_endian(dev, ncs[0].peer, true);
if (r < 0) {
goto err;
}
for (i = 0; i < total_queues; i++) {
vhost_net_set_vq_index(get_vhost_net(ncs[i].peer), i * 2);
for (j = 0; j < total_queues; j++) {
r = vhost_net_set_vnet_endian(dev, ncs[j].peer, true);
if (r < 0) {
goto err_endian;
}
vhost_net_set_vq_index(get_vhost_net(ncs[j].peer), j * 2);
}
r = k->set_guest_notifiers(qbus->parent, total_queues * 2, true);
@@ -343,8 +341,9 @@ err_start:
fflush(stderr);
}
err_endian:
vhost_net_set_vnet_endian(dev, ncs[0].peer, false);
err:
while (--j >= 0) {
vhost_net_set_vnet_endian(dev, ncs[j].peer, false);
}
return r;
}
+16 -9
View File
@@ -1194,8 +1194,13 @@ static void vmxnet3_reset_mac(VMXNET3State *s)
static void vmxnet3_deactivate_device(VMXNET3State *s)
{
VMW_CBPRN("Deactivating vmxnet3...");
s->device_active = false;
if (s->device_active) {
VMW_CBPRN("Deactivating vmxnet3...");
vmxnet_tx_pkt_reset(s->tx_pkt);
vmxnet_tx_pkt_uninit(s->tx_pkt);
vmxnet_rx_pkt_uninit(s->rx_pkt);
s->device_active = false;
}
}
static void vmxnet3_reset(VMXNET3State *s)
@@ -1204,7 +1209,6 @@ static void vmxnet3_reset(VMXNET3State *s)
vmxnet3_deactivate_device(s);
vmxnet3_reset_interrupt_states(s);
vmxnet_tx_pkt_reset(s->tx_pkt);
s->drv_shmem = 0;
s->tx_sop = true;
s->skip_current_tx_pkt = false;
@@ -1431,6 +1435,12 @@ static void vmxnet3_activate_device(VMXNET3State *s)
return;
}
/* Verify if device is active */
if (s->device_active) {
VMW_CFPRN("Vmxnet3 device is active");
return;
}
vmxnet3_adjust_by_guest_type(s);
vmxnet3_update_features(s);
vmxnet3_update_pm_state(s);
@@ -1627,7 +1637,7 @@ static void vmxnet3_handle_command(VMXNET3State *s, uint64_t cmd)
break;
case VMXNET3_CMD_QUIESCE_DEV:
VMW_CBPRN("Set: VMXNET3_CMD_QUIESCE_DEV - pause the device");
VMW_CBPRN("Set: VMXNET3_CMD_QUIESCE_DEV - deactivate the device");
vmxnet3_deactivate_device(s);
break;
@@ -1741,7 +1751,7 @@ vmxnet3_io_bar1_write(void *opaque,
* shared address only after we get the high part
*/
if (val == 0) {
s->device_active = false;
vmxnet3_deactivate_device(s);
}
s->temp_shared_guest_driver_memory = val;
s->drv_shmem = 0;
@@ -2015,16 +2025,13 @@ static bool vmxnet3_peer_has_vnet_hdr(VMXNET3State *s)
return true;
}
VMW_WRPRN("Peer has no virtio extension. Task offloads will be emulated.");
return false;
}
static void vmxnet3_net_uninit(VMXNET3State *s)
{
g_free(s->mcast_list);
vmxnet_tx_pkt_reset(s->tx_pkt);
vmxnet_tx_pkt_uninit(s->tx_pkt);
vmxnet_rx_pkt_uninit(s->rx_pkt);
vmxnet3_deactivate_device(s);
qemu_del_nic(s->nic);
}
+16 -10
View File
@@ -270,7 +270,8 @@ static int fw_cfg_select(FWCfgState *s, uint16_t key)
static uint8_t fw_cfg_read(FWCfgState *s)
{
int arch = !!(s->cur_entry & FW_CFG_ARCH_LOCAL);
FWCfgEntry *e = &s->entries[arch][s->cur_entry & FW_CFG_ENTRY_MASK];
FWCfgEntry *e = (s->cur_entry == FW_CFG_INVALID) ? NULL :
&s->entries[arch][s->cur_entry & FW_CFG_ENTRY_MASK];
uint8_t ret;
if (s->cur_entry == FW_CFG_INVALID || !e->data || s->cur_offset >= e->len)
@@ -338,7 +339,8 @@ static void fw_cfg_dma_transfer(FWCfgState *s)
}
arch = !!(s->cur_entry & FW_CFG_ARCH_LOCAL);
e = &s->entries[arch][s->cur_entry & FW_CFG_ENTRY_MASK];
e = (s->cur_entry == FW_CFG_INVALID) ? NULL :
&s->entries[arch][s->cur_entry & FW_CFG_ENTRY_MASK];
if (dma.control & FW_CFG_DMA_CTL_READ) {
read = 1;
@@ -780,17 +782,19 @@ FWCfgState *fw_cfg_init_io_dma(uint32_t iobase, uint32_t dma_iobase,
DeviceState *dev;
FWCfgState *s;
uint32_t version = FW_CFG_VERSION;
bool dma_enabled = dma_iobase && dma_as;
bool dma_requested = dma_iobase && dma_as;
dev = qdev_create(NULL, TYPE_FW_CFG_IO);
qdev_prop_set_uint32(dev, "iobase", iobase);
qdev_prop_set_uint32(dev, "dma_iobase", dma_iobase);
qdev_prop_set_bit(dev, "dma_enabled", dma_enabled);
if (!dma_requested) {
qdev_prop_set_bit(dev, "dma_enabled", false);
}
fw_cfg_init1(dev);
s = FW_CFG(dev);
if (dma_enabled) {
if (s->dma_enabled) {
/* 64 bits for the address field */
s->dma_as = dma_as;
s->dma_addr = 0;
@@ -816,11 +820,13 @@ FWCfgState *fw_cfg_init_mem_wide(hwaddr ctl_addr,
SysBusDevice *sbd;
FWCfgState *s;
uint32_t version = FW_CFG_VERSION;
bool dma_enabled = dma_addr && dma_as;
bool dma_requested = dma_addr && dma_as;
dev = qdev_create(NULL, TYPE_FW_CFG_MEM);
qdev_prop_set_uint32(dev, "data_width", data_width);
qdev_prop_set_bit(dev, "dma_enabled", dma_enabled);
if (!dma_requested) {
qdev_prop_set_bit(dev, "dma_enabled", false);
}
fw_cfg_init1(dev);
@@ -830,7 +836,7 @@ FWCfgState *fw_cfg_init_mem_wide(hwaddr ctl_addr,
s = FW_CFG(dev);
if (dma_enabled) {
if (s->dma_enabled) {
s->dma_as = dma_as;
s->dma_addr = 0;
sysbus_mmio_map(sbd, 2, dma_addr);
@@ -875,7 +881,7 @@ static Property fw_cfg_io_properties[] = {
DEFINE_PROP_UINT32("iobase", FWCfgIoState, iobase, -1),
DEFINE_PROP_UINT32("dma_iobase", FWCfgIoState, dma_iobase, -1),
DEFINE_PROP_BOOL("dma_enabled", FWCfgIoState, parent_obj.dma_enabled,
false),
true),
DEFINE_PROP_END_OF_LIST(),
};
@@ -915,7 +921,7 @@ static const TypeInfo fw_cfg_io_info = {
static Property fw_cfg_mem_properties[] = {
DEFINE_PROP_UINT32("data_width", FWCfgMemState, data_width, -1),
DEFINE_PROP_BOOL("dma_enabled", FWCfgMemState, parent_obj.dma_enabled,
false),
true),
DEFINE_PROP_END_OF_LIST(),
};
+8 -44
View File
@@ -408,7 +408,7 @@ struct taihu_cpld_t {
uint8_t reg1;
};
static uint32_t taihu_cpld_readb (void *opaque, hwaddr addr)
static uint64_t taihu_cpld_read(void *opaque, hwaddr addr, unsigned size)
{
taihu_cpld_t *cpld;
uint32_t ret;
@@ -429,8 +429,8 @@ static uint32_t taihu_cpld_readb (void *opaque, hwaddr addr)
return ret;
}
static void taihu_cpld_writeb (void *opaque,
hwaddr addr, uint32_t value)
static void taihu_cpld_write(void *opaque, hwaddr addr,
uint64_t value, unsigned size)
{
taihu_cpld_t *cpld;
@@ -447,48 +447,12 @@ static void taihu_cpld_writeb (void *opaque,
}
}
static uint32_t taihu_cpld_readw (void *opaque, hwaddr addr)
{
uint32_t ret;
ret = taihu_cpld_readb(opaque, addr) << 8;
ret |= taihu_cpld_readb(opaque, addr + 1);
return ret;
}
static void taihu_cpld_writew (void *opaque,
hwaddr addr, uint32_t value)
{
taihu_cpld_writeb(opaque, addr, (value >> 8) & 0xFF);
taihu_cpld_writeb(opaque, addr + 1, value & 0xFF);
}
static uint32_t taihu_cpld_readl (void *opaque, hwaddr addr)
{
uint32_t ret;
ret = taihu_cpld_readb(opaque, addr) << 24;
ret |= taihu_cpld_readb(opaque, addr + 1) << 16;
ret |= taihu_cpld_readb(opaque, addr + 2) << 8;
ret |= taihu_cpld_readb(opaque, addr + 3);
return ret;
}
static void taihu_cpld_writel (void *opaque,
hwaddr addr, uint32_t value)
{
taihu_cpld_writel(opaque, addr, (value >> 24) & 0xFF);
taihu_cpld_writel(opaque, addr + 1, (value >> 16) & 0xFF);
taihu_cpld_writel(opaque, addr + 2, (value >> 8) & 0xFF);
taihu_cpld_writeb(opaque, addr + 3, value & 0xFF);
}
static const MemoryRegionOps taihu_cpld_ops = {
.old_mmio = {
.read = { taihu_cpld_readb, taihu_cpld_readw, taihu_cpld_readl, },
.write = { taihu_cpld_writeb, taihu_cpld_writew, taihu_cpld_writel, },
.read = taihu_cpld_read,
.write = taihu_cpld_write,
.impl = {
.min_access_size = 1,
.max_access_size = 1,
},
.endianness = DEVICE_NATIVE_ENDIAN,
};
+2 -2
View File
@@ -125,6 +125,7 @@ static XICSState *xics_system_init(MachineState *machine,
error_report("kernel_irqchip requested but unavailable: %s",
error_get_pretty(err));
}
error_free(err);
}
if (!icp) {
@@ -2326,6 +2327,7 @@ static void spapr_compat_2_3(Object *obj)
{
savevm_skip_section_footers();
global_state_set_optional();
savevm_skip_configuration();
}
static void spapr_compat_2_2(Object *obj)
@@ -2422,8 +2424,6 @@ static void spapr_machine_2_4_class_init(ObjectClass *oc, void *data)
MachineClass *mc = MACHINE_CLASS(oc);
mc->desc = "pSeries Logical Partition (PAPR compliant) v2.4";
mc->alias = "pseries";
mc->is_default = 0;
mc->compat_props = compat_props;
}
+35 -6
View File
@@ -254,10 +254,16 @@ static void prop_get_fdt(Object *obj, Visitor *v, void *opaque,
const char *name, Error **errp)
{
sPAPRDRConnector *drc = SPAPR_DR_CONNECTOR(obj);
Error *err = NULL;
int fdt_offset_next, fdt_offset, fdt_depth;
void *fdt;
if (!drc->fdt) {
visit_start_struct(v, NULL, NULL, name, 0, &err);
if (!err) {
visit_end_struct(v, &err);
}
error_propagate(errp, err);
return;
}
@@ -276,24 +282,43 @@ static void prop_get_fdt(Object *obj, Visitor *v, void *opaque,
case FDT_BEGIN_NODE:
fdt_depth++;
name = fdt_get_name(fdt, fdt_offset, &name_len);
visit_start_struct(v, NULL, NULL, name, 0, NULL);
visit_start_struct(v, NULL, NULL, name, 0, &err);
if (err) {
error_propagate(errp, err);
return;
}
break;
case FDT_END_NODE:
/* shouldn't ever see an FDT_END_NODE before FDT_BEGIN_NODE */
g_assert(fdt_depth > 0);
visit_end_struct(v, NULL);
visit_end_struct(v, &err);
if (err) {
error_propagate(errp, err);
return;
}
fdt_depth--;
break;
case FDT_PROP: {
int i;
prop = fdt_get_property_by_offset(fdt, fdt_offset, &prop_len);
name = fdt_string(fdt, fdt32_to_cpu(prop->nameoff));
visit_start_list(v, name, NULL);
visit_start_list(v, name, &err);
if (err) {
error_propagate(errp, err);
return;
}
for (i = 0; i < prop_len; i++) {
visit_type_uint8(v, (uint8_t *)&prop->data[i], NULL, NULL);
visit_type_uint8(v, (uint8_t *)&prop->data[i], NULL, &err);
if (err) {
error_propagate(errp, err);
return;
}
}
visit_end_list(v, &err);
if (err) {
error_propagate(errp, err);
return;
}
visit_end_list(v, NULL);
break;
}
default:
@@ -574,6 +599,10 @@ static void spapr_dr_connector_class_init(ObjectClass *k, void *data)
drck->attach = attach;
drck->detach = detach;
drck->release_pending = release_pending;
/*
* Reason: it crashes FIXME find and document the real reason
*/
dk->cannot_instantiate_with_device_add_yet = true;
}
static const TypeInfo spapr_dr_connector_info = {
+1 -1
View File
@@ -701,7 +701,7 @@ int css_do_csch(SubchDev *sch)
/* Trigger the clear function. */
s->ctrl &= ~(SCSW_CTRL_MASK_FCTL | SCSW_CTRL_MASK_ACTL);
s->ctrl |= SCSW_FCTL_CLEAR_FUNC | SCSW_FCTL_CLEAR_FUNC;
s->ctrl |= SCSW_FCTL_CLEAR_FUNC | SCSW_ACTL_CLEAR_PEND;
do_subchannel_work(sch, NULL);
ret = 0;
+22 -4
View File
@@ -308,7 +308,7 @@ static IOMMUTLBEntry s390_translate_iommu(MemoryRegion *iommu, hwaddr addr,
{
uint64_t pte;
uint32_t flags;
S390PCIBusDevice *pbdev = container_of(iommu, S390PCIBusDevice, mr);
S390PCIBusDevice *pbdev = container_of(iommu, S390PCIBusDevice, iommu_mr);
S390pciState *s;
IOMMUTLBEntry ret = {
.target_as = &address_space_memory,
@@ -454,14 +454,32 @@ static const MemoryRegionOps s390_msi_ctrl_ops = {
.endianness = DEVICE_LITTLE_ENDIAN,
};
void s390_pcihost_iommu_configure(S390PCIBusDevice *pbdev, bool enable)
{
pbdev->configured = false;
if (enable) {
uint64_t size = pbdev->pal - pbdev->pba + 1;
memory_region_init_iommu(&pbdev->iommu_mr, OBJECT(&pbdev->mr),
&s390_iommu_ops, "iommu-s390", size);
memory_region_add_subregion(&pbdev->mr, pbdev->pba, &pbdev->iommu_mr);
} else {
memory_region_del_subregion(&pbdev->mr, &pbdev->iommu_mr);
}
pbdev->configured = true;
}
static void s390_pcihost_init_as(S390pciState *s)
{
int i;
S390PCIBusDevice *pbdev;
for (i = 0; i < PCI_SLOT_MAX; i++) {
memory_region_init_iommu(&s->pbdev[i].mr, OBJECT(s),
&s390_iommu_ops, "iommu-s390", UINT64_MAX);
address_space_init(&s->pbdev[i].as, &s->pbdev[i].mr, "iommu-pci");
pbdev = &s->pbdev[i];
memory_region_init(&pbdev->mr, OBJECT(s),
"iommu-root-s390", UINT64_MAX);
address_space_init(&pbdev->as, &pbdev->mr, "iommu-pci");
}
memory_region_init_io(&s->msix_notify_mr, OBJECT(s),
+2
View File
@@ -231,6 +231,7 @@ typedef struct S390PCIBusDevice {
AdapterRoutes routes;
AddressSpace as;
MemoryRegion mr;
MemoryRegion iommu_mr;
} S390PCIBusDevice;
typedef struct S390pciState {
@@ -244,6 +245,7 @@ typedef struct S390pciState {
int chsc_sei_nt2_get_event(void *res);
int chsc_sei_nt2_have_event(void);
void s390_pci_sclp_configure(int configure, SCCB *sccb);
void s390_pcihost_iommu_configure(S390PCIBusDevice *pbdev, bool enable);
S390PCIBusDevice *s390_pci_find_dev_by_idx(uint32_t idx);
S390PCIBusDevice *s390_pci_find_dev_by_fh(uint32_t fh);
S390PCIBusDevice *s390_pci_find_dev_by_fid(uint32_t fid);
+6 -1
View File
@@ -528,7 +528,7 @@ int rpcit_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
goto out;
}
mr = pci_device_iommu_address_space(pbdev->pdev)->root;
mr = &pbdev->iommu_mr;
while (start < end) {
entry = mr->iommu_ops->translate(mr, start, 0);
@@ -689,6 +689,9 @@ static int reg_ioat(CPUS390XState *env, S390PCIBusDevice *pbdev, ZpciFib fib)
pbdev->pba = pba;
pbdev->pal = pal;
pbdev->g_iota = g_iota;
s390_pcihost_iommu_configure(pbdev, true);
return 0;
}
@@ -697,6 +700,8 @@ static void dereg_ioat(S390PCIBusDevice *pbdev)
pbdev->pba = 0;
pbdev->pal = 0;
pbdev->g_iota = 0;
s390_pcihost_iommu_configure(pbdev, false);
}
int mpcifc_service_call(S390CPU *cpu, uint8_t r1, uint64_t fiba, uint8_t ar)
+6 -3
View File
@@ -33,6 +33,7 @@
#include "hw/virtio/virtio.h"
#include "sysemu/kvm.h"
#include "exec/address-spaces.h"
#include "sysemu/qtest.h"
#include "hw/s390x/s390-virtio-bus.h"
#include "hw/s390x/sclp.h"
@@ -268,9 +269,11 @@ static void s390_init(MachineState *machine)
hwaddr virtio_region_len;
hwaddr virtio_region_start;
error_printf("WARNING\n"
"The s390-virtio machine (non-ccw) is deprecated.\n"
"It will be removed in 2.6. Please use s390-ccw-virtio\n");
if (!qtest_enabled()) {
error_printf("WARNING\n"
"The s390-virtio machine (non-ccw) is deprecated.\n"
"It will be removed in 2.6. Please use s390-ccw-virtio\n");
}
if (machine->ram_slots) {
error_report("Memory hotplug not supported by the selected machine.");
+12
View File
@@ -1555,6 +1555,17 @@ static void virtio_ccw_device_plugged(DeviceState *d, Error **errp)
d->hotplugged, 1);
}
static void virtio_ccw_post_plugged(DeviceState *d, Error **errp)
{
VirtioCcwDevice *dev = VIRTIO_CCW_DEVICE(d);
VirtIODevice *vdev = virtio_bus_get_device(&dev->bus);
if (!virtio_host_has_feature(vdev, VIRTIO_F_VERSION_1)) {
/* A backend didn't support modern virtio. */
dev->max_rev = 0;
}
}
static void virtio_ccw_device_unplugged(DeviceState *d)
{
VirtioCcwDevice *dev = VIRTIO_CCW_DEVICE(d);
@@ -1891,6 +1902,7 @@ static void virtio_ccw_bus_class_init(ObjectClass *klass, void *data)
k->save_config = virtio_ccw_save_config;
k->load_config = virtio_ccw_load_config;
k->device_plugged = virtio_ccw_device_plugged;
k->post_plugged = virtio_ccw_post_plugged;
k->device_unplugged = virtio_ccw_device_unplugged;
}
+1 -1
View File
@@ -718,7 +718,7 @@ static int megasas_ctrl_get_info(MegasasState *s, MegasasCmd *cmd)
BusChild *kid;
int num_pd_disks = 0;
memset(&info, 0x0, cmd->iov_size);
memset(&info, 0x0, dcmd_size);
if (cmd->iov_size < dcmd_size) {
trace_megasas_dcmd_invalid_xfer_len(cmd->index, cmd->iov_size,
dcmd_size);
+1 -1
View File
@@ -250,7 +250,7 @@ static int virtio_scsi_do_tmf(VirtIOSCSI *s, VirtIOSCSIReq *req)
int target;
int ret = 0;
if (s->dataplane_started) {
if (s->dataplane_started && d) {
assert(blk_get_aio_context(d->conf.blk) == s->ctx);
}
/* Here VIRTIO_SCSI_S_OK means "FUNCTION COMPLETE". */
+1
View File
@@ -494,6 +494,7 @@ SDState *sd_init(BlockBackend *blk, bool is_spi)
if (sd->blk) {
/* Attach dev if not already attached. (This call ignores an
* error return code if sd->blk is already attached.) */
/* FIXME ignoring blk_attach_dev() failure is dangerously brittle */
blk_attach_dev(sd->blk, sd);
blk_set_dev_ops(sd->blk, &sd_block_ops, sd);
}
+7 -2
View File
@@ -1221,7 +1221,12 @@ const VMStateDescription sdhci_vmstate = {
/* Capabilities registers provide information on supported features of this
* specific host controller implementation */
static Property sdhci_pci_properties[] = {
DEFINE_BLOCK_PROPERTIES(SDHCIState, conf),
/*
* We currently fuse controller and card into a single device
* model, but we intend to separate them. For that purpose, the
* properties that belong to the card are marked as experimental.
*/
DEFINE_PROP_DRIVE("x-drive", SDHCIState, blk),
DEFINE_PROP_UINT32("capareg", SDHCIState, capareg,
SDHC_CAPAB_REG_DEFAULT),
DEFINE_PROP_UINT32("maxcurr", SDHCIState, maxcurr, 0),
@@ -1233,7 +1238,7 @@ static void sdhci_pci_realize(PCIDevice *dev, Error **errp)
SDHCIState *s = PCI_SDHCI(dev);
dev->config[PCI_CLASS_PROG] = 0x01; /* Standard Host supported DMA */
dev->config[PCI_INTERRUPT_PIN] = 0x01; /* interrupt pin A */
sdhci_initfn(s, s->conf.blk);
sdhci_initfn(s, s->blk);
s->buf_maxsz = sdhci_get_fifolen(s);
s->fifo_buffer = g_malloc0(s->buf_maxsz);
s->irq = pci_allocate_irq(dev);
+9 -9
View File
@@ -128,9 +128,16 @@ static void do_token_setup(USBDevice *s, USBPacket *p)
}
usb_packet_copy(p, s->setup_buf, p->iov.size);
s->setup_index = 0;
p->actual_length = 0;
s->setup_len = (s->setup_buf[7] << 8) | s->setup_buf[6];
s->setup_index = 0;
if (s->setup_len > sizeof(s->data_buf)) {
fprintf(stderr,
"usb_generic_handle_packet: ctrl buffer too small (%d > %zu)\n",
s->setup_len, sizeof(s->data_buf));
p->status = USB_RET_STALL;
return;
}
request = (s->setup_buf[0] << 8) | s->setup_buf[1];
value = (s->setup_buf[3] << 8) | s->setup_buf[2];
@@ -151,13 +158,6 @@ static void do_token_setup(USBDevice *s, USBPacket *p)
}
s->setup_state = SETUP_STATE_DATA;
} else {
if (s->setup_len > sizeof(s->data_buf)) {
fprintf(stderr,
"usb_generic_handle_packet: ctrl buffer too small (%d > %zu)\n",
s->setup_len, sizeof(s->data_buf));
p->status = USB_RET_STALL;
return;
}
if (s->setup_len == 0)
s->setup_state = SETUP_STATE_ACK;
else
@@ -176,7 +176,7 @@ static void do_token_in(USBDevice *s, USBPacket *p)
request = (s->setup_buf[0] << 8) | s->setup_buf[1];
value = (s->setup_buf[3] << 8) | s->setup_buf[2];
index = (s->setup_buf[5] << 8) | s->setup_buf[4];
switch(s->setup_state) {
case SETUP_STATE_ACK:
if (!(s->setup_buf[0] & USB_DIR_IN)) {
+8 -4
View File
@@ -653,7 +653,8 @@ typedef struct USBNetState {
static int is_rndis(USBNetState *s)
{
return s->dev.config->bConfigurationValue == DEV_RNDIS_CONFIG_VALUE;
return s->dev.config ?
s->dev.config->bConfigurationValue == DEV_RNDIS_CONFIG_VALUE : 0;
}
static int ndis_query(USBNetState *s, uint32_t oid,
@@ -914,8 +915,9 @@ static int rndis_query_response(USBNetState *s,
bufoffs = le32_to_cpu(buf->InformationBufferOffset) + 8;
buflen = le32_to_cpu(buf->InformationBufferLength);
if (bufoffs + buflen > length)
if (buflen > length || bufoffs >= length || bufoffs + buflen > length) {
return USB_RET_STALL;
}
infobuflen = ndis_query(s, le32_to_cpu(buf->OID),
bufoffs + (uint8_t *) buf, buflen, infobuf,
@@ -960,8 +962,9 @@ static int rndis_set_response(USBNetState *s,
bufoffs = le32_to_cpu(buf->InformationBufferOffset) + 8;
buflen = le32_to_cpu(buf->InformationBufferLength);
if (bufoffs + buflen > length)
if (buflen > length || bufoffs >= length || bufoffs + buflen > length) {
return USB_RET_STALL;
}
ret = ndis_set(s, le32_to_cpu(buf->OID),
bufoffs + (uint8_t *) buf, buflen);
@@ -1211,8 +1214,9 @@ static void usb_net_handle_dataout(USBNetState *s, USBPacket *p)
if (le32_to_cpu(msg->MessageType) == RNDIS_PACKET_MSG) {
uint32_t offs = 8 + le32_to_cpu(msg->DataOffset);
uint32_t size = le32_to_cpu(msg->DataLength);
if (offs + size <= len)
if (offs < len && size < len && offs + size <= len) {
qemu_send_packet(qemu_get_queue(s->nic), s->out_buf + offs, size);
}
}
s->out_ptr -= len;
memmove(s->out_buf, &s->out_buf[len], s->out_ptr);
+12 -5
View File
@@ -865,6 +865,7 @@ void ehci_reset(void *opaque)
s->usbsts = USBSTS_HALT;
s->usbsts_pending = 0;
s->usbsts_frindex = 0;
ehci_update_irq(s);
s->astate = EST_INACTIVE;
s->pstate = EST_INACTIVE;
@@ -1404,21 +1405,23 @@ static int ehci_process_itd(EHCIState *ehci,
if (itd->transact[i] & ITD_XACT_ACTIVE) {
pg = get_field(itd->transact[i], ITD_XACT_PGSEL);
off = itd->transact[i] & ITD_XACT_OFFSET_MASK;
ptr1 = (itd->bufptr[pg] & ITD_BUFPTR_MASK);
ptr2 = (itd->bufptr[pg+1] & ITD_BUFPTR_MASK);
len = get_field(itd->transact[i], ITD_XACT_LENGTH);
if (len > max * mult) {
len = max * mult;
}
if (len > BUFF_SIZE) {
if (len > BUFF_SIZE || pg > 6) {
return -1;
}
ptr1 = (itd->bufptr[pg] & ITD_BUFPTR_MASK);
qemu_sglist_init(&ehci->isgl, ehci->device, 2, ehci->as);
if (off + len > 4096) {
/* transfer crosses page border */
if (pg == 6) {
return -1; /* avoid page pg + 1 */
}
ptr2 = (itd->bufptr[pg + 1] & ITD_BUFPTR_MASK);
uint32_t len2 = off + len - 4096;
uint32_t len1 = len - len2;
qemu_sglist_add(&ehci->isgl, ptr1 + off, len1);
@@ -2000,6 +2003,7 @@ static int ehci_state_writeback(EHCIQueue *q)
static void ehci_advance_state(EHCIState *ehci, int async)
{
EHCIQueue *q = NULL;
int itd_count = 0;
int again;
do {
@@ -2024,10 +2028,12 @@ static void ehci_advance_state(EHCIState *ehci, int async)
case EST_FETCHITD:
again = ehci_state_fetchitd(ehci, async);
itd_count++;
break;
case EST_FETCHSITD:
again = ehci_state_fetchsitd(ehci, async);
itd_count++;
break;
case EST_ADVANCEQUEUE:
@@ -2076,7 +2082,8 @@ static void ehci_advance_state(EHCIState *ehci, int async)
break;
}
if (again < 0) {
if (again < 0 || itd_count > 16) {
/* TODO: notify guest (raise HSE irq?) */
fprintf(stderr, "processing error - resetting ehci HC\n");
ehci_reset(ehci);
again = 0;
+20
View File
@@ -612,6 +612,25 @@ static int vhost_user_migration_done(struct vhost_dev *dev, char* mac_addr)
return -1;
}
static bool vhost_user_can_merge(struct vhost_dev *dev,
uint64_t start1, uint64_t size1,
uint64_t start2, uint64_t size2)
{
ram_addr_t ram_addr;
int mfd, rfd;
MemoryRegion *mr;
mr = qemu_ram_addr_from_host((void *)(uintptr_t)start1, &ram_addr);
assert(mr);
mfd = qemu_get_ram_fd(ram_addr);
mr = qemu_ram_addr_from_host((void *)(uintptr_t)start2, &ram_addr);
assert(mr);
rfd = qemu_get_ram_fd(ram_addr);
return mfd == rfd;
}
const VhostOps user_ops = {
.backend_type = VHOST_BACKEND_TYPE_USER,
.vhost_backend_init = vhost_user_init,
@@ -634,4 +653,5 @@ const VhostOps user_ops = {
.vhost_set_vring_enable = vhost_user_set_vring_enable,
.vhost_requires_shm_log = vhost_user_requires_shm_log,
.vhost_migration_done = vhost_user_migration_done,
.vhost_backend_can_merge = vhost_user_can_merge,
};
+7 -9
View File
@@ -259,6 +259,13 @@ static void vhost_dev_assign_memory(struct vhost_dev *dev,
continue;
}
if (dev->vhost_ops->vhost_backend_can_merge &&
!dev->vhost_ops->vhost_backend_can_merge(dev, uaddr, size,
reg->userspace_addr,
reg->memory_size)) {
continue;
}
if (merged) {
--to;
assert(to >= 0);
@@ -1226,11 +1233,6 @@ int vhost_dev_start(struct vhost_dev *hdev, VirtIODevice *vdev)
}
}
if (hdev->vhost_ops->vhost_set_vring_enable) {
/* only enable first vq pair by default */
hdev->vhost_ops->vhost_set_vring_enable(hdev, hdev->vq_index == 0);
}
return 0;
fail_log:
vhost_log_put(hdev, false);
@@ -1261,10 +1263,6 @@ void vhost_dev_stop(struct vhost_dev *hdev, VirtIODevice *vdev)
hdev->vq_index + i);
}
if (hdev->vhost_ops->vhost_set_vring_enable) {
hdev->vhost_ops->vhost_set_vring_enable(hdev, 0);
}
vhost_log_put(hdev, true);
hdev->started = false;
hdev->log = NULL;
+3
View File
@@ -56,6 +56,9 @@ void virtio_bus_device_plugged(VirtIODevice *vdev, Error **errp)
assert(vdc->get_features != NULL);
vdev->host_features = vdc->get_features(vdev, vdev->host_features,
errp);
if (klass->post_plugged != NULL) {
klass->post_plugged(qbus->parent, errp);
}
}
/* Reset the virtio_bus */
+25 -5
View File
@@ -1814,13 +1814,10 @@ static void virtio_pci_realize(PCIDevice *pci_dev, Error **errp)
address_space_init(&proxy->modern_as, &proxy->modern_cfg, "virtio-pci-cfg-as");
if (!(proxy->flags & VIRTIO_PCI_FLAG_DISABLE_PCIE)
&& !(proxy->flags & VIRTIO_PCI_FLAG_DISABLE_MODERN)
&& pci_bus_is_express(pci_dev->bus)
&& !pci_bus_is_root(pci_dev->bus)) {
if (pci_is_express(pci_dev) && pci_bus_is_express(pci_dev->bus) &&
!pci_bus_is_root(pci_dev->bus)) {
int pos;
pci_dev->cap_present |= QEMU_PCI_CAP_EXPRESS;
pos = pcie_endpoint_cap_init(pci_dev, 0);
assert(pos > 0);
@@ -1832,6 +1829,12 @@ static void virtio_pci_realize(PCIDevice *pci_dev, Error **errp)
* PCI Power Management Interface Specification.
*/
pci_set_word(pci_dev->config + pos + PCI_PM_PMC, 0x3);
} else {
/*
* make future invocations of pci_is_express() return false
* and pci_config_size() return PCI_CONFIG_SPACE_SIZE.
*/
pci_dev->cap_present &= ~QEMU_PCI_CAP_EXPRESS;
}
virtio_pci_bus_new(&proxy->bus, sizeof(proxy->bus), proxy);
@@ -1879,10 +1882,25 @@ static Property virtio_pci_properties[] = {
DEFINE_PROP_END_OF_LIST(),
};
static void virtio_pci_dc_realize(DeviceState *qdev, Error **errp)
{
VirtioPCIClass *vpciklass = VIRTIO_PCI_GET_CLASS(qdev);
VirtIOPCIProxy *proxy = VIRTIO_PCI(qdev);
PCIDevice *pci_dev = &proxy->pci_dev;
if (!(proxy->flags & VIRTIO_PCI_FLAG_DISABLE_PCIE) &&
!(proxy->flags & VIRTIO_PCI_FLAG_DISABLE_MODERN)) {
pci_dev->cap_present |= QEMU_PCI_CAP_EXPRESS;
}
vpciklass->parent_dc_realize(qdev, errp);
}
static void virtio_pci_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
VirtioPCIClass *vpciklass = VIRTIO_PCI_CLASS(klass);
dc->props = virtio_pci_properties;
k->realize = virtio_pci_realize;
@@ -1890,6 +1908,8 @@ static void virtio_pci_class_init(ObjectClass *klass, void *data)
k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET;
k->revision = VIRTIO_PCI_ABI_VERSION;
k->class_id = PCI_CLASS_OTHERS;
vpciklass->parent_dc_realize = dc->realize;
dc->realize = virtio_pci_dc_realize;
dc->reset = virtio_pci_reset;
}
+11 -7
View File
@@ -59,30 +59,33 @@ typedef struct VirtioBusClass VirtioPCIBusClass;
#define VIRTIO_PCI_BUS_CLASS(klass) \
OBJECT_CLASS_CHECK(VirtioPCIBusClass, klass, TYPE_VIRTIO_PCI_BUS)
enum {
VIRTIO_PCI_FLAG_BUS_MASTER_BUG_MIGRATION_BIT,
VIRTIO_PCI_FLAG_USE_IOEVENTFD_BIT,
VIRTIO_PCI_FLAG_DISABLE_LEGACY_BIT,
VIRTIO_PCI_FLAG_DISABLE_MODERN_BIT,
VIRTIO_PCI_FLAG_MIGRATE_EXTRA_BIT,
VIRTIO_PCI_FLAG_MODERN_PIO_NOTIFY_BIT,
VIRTIO_PCI_FLAG_DISABLE_PCIE_BIT,
};
/* Need to activate work-arounds for buggy guests at vmstate load. */
#define VIRTIO_PCI_FLAG_BUS_MASTER_BUG_MIGRATION_BIT 0
#define VIRTIO_PCI_FLAG_BUS_MASTER_BUG_MIGRATION \
(1 << VIRTIO_PCI_FLAG_BUS_MASTER_BUG_MIGRATION_BIT)
/* Performance improves when virtqueue kick processing is decoupled from the
* vcpu thread using ioeventfd for some devices. */
#define VIRTIO_PCI_FLAG_USE_IOEVENTFD_BIT 1
#define VIRTIO_PCI_FLAG_USE_IOEVENTFD (1 << VIRTIO_PCI_FLAG_USE_IOEVENTFD_BIT)
/* virtio version flags */
#define VIRTIO_PCI_FLAG_DISABLE_LEGACY_BIT 2
#define VIRTIO_PCI_FLAG_DISABLE_MODERN_BIT 3
#define VIRTIO_PCI_FLAG_DISABLE_PCIE_BIT 4
#define VIRTIO_PCI_FLAG_DISABLE_LEGACY (1 << VIRTIO_PCI_FLAG_DISABLE_LEGACY_BIT)
#define VIRTIO_PCI_FLAG_DISABLE_MODERN (1 << VIRTIO_PCI_FLAG_DISABLE_MODERN_BIT)
#define VIRTIO_PCI_FLAG_DISABLE_PCIE (1 << VIRTIO_PCI_FLAG_DISABLE_PCIE_BIT)
/* migrate extra state */
#define VIRTIO_PCI_FLAG_MIGRATE_EXTRA_BIT 4
#define VIRTIO_PCI_FLAG_MIGRATE_EXTRA (1 << VIRTIO_PCI_FLAG_MIGRATE_EXTRA_BIT)
/* have pio notification for modern device ? */
#define VIRTIO_PCI_FLAG_MODERN_PIO_NOTIFY_BIT 5
#define VIRTIO_PCI_FLAG_MODERN_PIO_NOTIFY \
(1 << VIRTIO_PCI_FLAG_MODERN_PIO_NOTIFY_BIT)
@@ -105,6 +108,7 @@ typedef struct {
typedef struct VirtioPCIClass {
PCIDeviceClass parent_class;
DeviceRealize parent_dc_realize;
void (*realize)(VirtIOPCIProxy *vpci_dev, Error **errp);
} VirtioPCIClass;
+1 -1
View File
@@ -234,7 +234,7 @@ int xen_domain_build_pv(const char *kernel, const char *ramdisk,
int rc;
memcpy(uuid, qemu_uuid, sizeof(uuid));
rc = xc_domain_create(xen_xc, ssidref, uuid, flags, &xen_domid);
rc = xen_domain_create(xen_xc, ssidref, uuid, flags, &xen_domid);
if (rc < 0) {
fprintf(stderr, "xen: xc_domain_create() failed\n");
goto err;
+3 -2
View File
@@ -61,7 +61,7 @@ typedef enum {
* opened with BDRV_O_UNMAP.
*/
BDRV_REQ_MAY_UNMAP = 0x4,
BDRV_REQ_NO_COPY_ON_READ = 0x8,
BDRV_REQ_NO_SERIALISING = 0x8,
} BdrvRequestFlags;
typedef struct BlockSizes {
@@ -196,6 +196,7 @@ int bdrv_create(BlockDriver *drv, const char* filename,
int bdrv_create_file(const char *filename, QemuOpts *opts, Error **errp);
BlockDriverState *bdrv_new_root(void);
BlockDriverState *bdrv_new(void);
void bdrv_device_remove(BlockDriverState *bs);
void bdrv_make_anon(BlockDriverState *bs);
void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old);
void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top);
@@ -248,7 +249,7 @@ int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num,
int nb_sectors, QEMUIOVector *qiov);
int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs,
int64_t sector_num, int nb_sectors, QEMUIOVector *qiov);
int coroutine_fn bdrv_co_no_copy_on_readv(BlockDriverState *bs,
int coroutine_fn bdrv_co_readv_no_serialising(BlockDriverState *bs,
int64_t sector_num, int nb_sectors, QEMUIOVector *qiov);
int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num,
int nb_sectors, QEMUIOVector *qiov);
+1
View File
@@ -686,6 +686,7 @@ void blk_set_bs(BlockBackend *blk, BlockDriverState *bs);
void blk_dev_change_media_cb(BlockBackend *blk, bool load);
bool blk_dev_has_removable_media(BlockBackend *blk);
bool blk_dev_has_tray(BlockBackend *blk);
void blk_dev_eject_request(BlockBackend *blk, bool force);
bool blk_dev_is_tray_open(BlockBackend *blk);
bool blk_dev_is_medium_locked(BlockBackend *blk);
+5 -3
View File
@@ -174,11 +174,13 @@ extern unsigned long reserved_va;
#define TARGET_PAGE_MASK ~(TARGET_PAGE_SIZE - 1)
#define TARGET_PAGE_ALIGN(addr) (((addr) + TARGET_PAGE_SIZE - 1) & TARGET_PAGE_MASK)
/* ??? These should be the larger of uintptr_t and target_ulong. */
/* Using intptr_t ensures that qemu_*_page_mask is sign-extended even
* when intptr_t is 32-bit and we are aligning a long long.
*/
extern uintptr_t qemu_real_host_page_size;
extern uintptr_t qemu_real_host_page_mask;
extern intptr_t qemu_real_host_page_mask;
extern uintptr_t qemu_host_page_size;
extern uintptr_t qemu_host_page_mask;
extern intptr_t qemu_host_page_mask;
#define HOST_PAGE_ALIGN(addr) (((addr) + qemu_host_page_size - 1) & qemu_host_page_mask)
#define REAL_HOST_PAGE_ALIGN(addr) (((addr) + qemu_real_host_page_size - 1) & \
+6
View File
@@ -51,6 +51,11 @@ bool machine_mem_merge(MachineState *machine);
* used to provide @cpu_index to socket number mapping, allowing
* a machine to group CPU threads belonging to the same socket/package
* Returns: socket number given cpu_index belongs to.
* @hw_version:
* Value of QEMU_VERSION when the machine was added to QEMU.
* Set only by old machines because they need to keep
* compatibility on code that exposed QEMU_VERSION to guests in
* the past (and now use qemu_hw_version()).
*/
struct MachineClass {
/*< private >*/
@@ -119,6 +124,7 @@ struct MachineState {
char *firmware;
bool iommu;
bool suppress_vmdesc;
bool enforce_config_section;
ram_addr_t ram_size;
ram_addr_t maxram_size;
+4 -17
View File
@@ -504,7 +504,6 @@ typedef struct {
#define OCF_CREATE_CONN_CANCEL 0x0008
typedef struct {
uint8_t status;
bdaddr_t bdaddr;
} QEMU_PACKED create_conn_cancel_cp;
#define CREATE_CONN_CANCEL_CP_SIZE 6
@@ -1266,13 +1265,13 @@ typedef struct {
uint8_t status;
uint16_t handle;
} QEMU_PACKED reset_failed_contact_counter_rp;
#define RESET_FAILED_CONTACT_COUNTER_RP_SIZE 4
#define RESET_FAILED_CONTACT_COUNTER_RP_SIZE 3
#define OCF_READ_LINK_QUALITY 0x0003
typedef struct {
uint16_t handle;
} QEMU_PACKED read_link_quality_cp;
#define READ_LINK_QUALITY_CP_SIZE 4
#define READ_LINK_QUALITY_CP_SIZE 2
typedef struct {
uint8_t status;
@@ -1332,7 +1331,7 @@ typedef struct {
uint8_t dev_class[3];
uint16_t clock_offset;
} QEMU_PACKED inquiry_info;
#define INQUIRY_INFO_SIZE 14
#define INQUIRY_INFO_SIZE 15
#define EVT_CONN_COMPLETE 0x03
typedef struct {
@@ -1381,7 +1380,7 @@ typedef struct {
uint16_t handle;
uint8_t encrypt;
} QEMU_PACKED evt_encrypt_change;
#define EVT_ENCRYPT_CHANGE_SIZE 5
#define EVT_ENCRYPT_CHANGE_SIZE 4
#define EVT_CHANGE_CONN_LINK_KEY_COMPLETE 0x09
typedef struct {
@@ -1629,18 +1628,6 @@ typedef struct {
} QEMU_PACKED evt_sniff_subrate;
#define EVT_SNIFF_SUBRATE_SIZE 11
#define EVT_EXTENDED_INQUIRY_RESULT 0x2F
typedef struct {
bdaddr_t bdaddr;
uint8_t pscan_rep_mode;
uint8_t pscan_period_mode;
uint8_t dev_class[3];
uint16_t clock_offset;
int8_t rssi;
uint8_t data[240];
} QEMU_PACKED extended_inquiry_info;
#define EXTENDED_INQUIRY_INFO_SIZE 254
#define EVT_TESTING 0xFE
#define EVT_VENDOR 0xFF
+8
View File
@@ -18,6 +18,14 @@
.driver = "virtio-pci",\
.property = "migrate-extra",\
.value = "off",\
},{\
.driver = "fw_cfg_mem",\
.property = "dma_enabled",\
.value = "off",\
},{\
.driver = "fw_cfg_io",\
.property = "dma_enabled",\
.value = "off",\
},
#define HW_COMPAT_2_3 \
-1
View File
@@ -250,7 +250,6 @@ SCSIRequest *scsi_req_alloc(const SCSIReqOps *reqops, SCSIDevice *d,
SCSIRequest *scsi_req_new(SCSIDevice *d, uint32_t tag, uint32_t lun,
uint8_t *buf, void *hba_private);
int32_t scsi_req_enqueue(SCSIRequest *req);
void scsi_req_free(SCSIRequest *req);
SCSIRequest *scsi_req_ref(SCSIRequest *req);
void scsi_req_unref(SCSIRequest *req);
+1 -1
View File
@@ -39,7 +39,7 @@ typedef struct SDHCIState {
};
SDState *card;
MemoryRegion iomem;
BlockConf conf;
BlockBackend *blk;
QEMUTimer *insert_timer; /* timer for 'changing' sd card. */
QEMUTimer *transfer_timer;
+4
View File
@@ -70,6 +70,9 @@ typedef int (*vhost_set_vring_enable_op)(struct vhost_dev *dev,
typedef bool (*vhost_requires_shm_log_op)(struct vhost_dev *dev);
typedef int (*vhost_migration_done_op)(struct vhost_dev *dev,
char *mac_addr);
typedef bool (*vhost_backend_can_merge_op)(struct vhost_dev *dev,
uint64_t start1, uint64_t size1,
uint64_t start2, uint64_t size2);
typedef struct VhostOps {
VhostBackendType backend_type;
@@ -97,6 +100,7 @@ typedef struct VhostOps {
vhost_set_vring_enable_op vhost_set_vring_enable;
vhost_requires_shm_log_op vhost_requires_shm_log;
vhost_migration_done_op vhost_migration_done;
vhost_backend_can_merge_op vhost_backend_can_merge;
} VhostOps;
extern const VhostOps user_ops;
-1
View File
@@ -66,7 +66,6 @@ struct vhost_dev {
int vhost_dev_init(struct vhost_dev *hdev, void *opaque,
VhostBackendType backend_type);
void vhost_dev_cleanup(struct vhost_dev *hdev);
bool vhost_dev_query(struct vhost_dev *hdev, VirtIODevice *vdev);
int vhost_dev_start(struct vhost_dev *hdev, VirtIODevice *vdev);
void vhost_dev_stop(struct vhost_dev *hdev, VirtIODevice *vdev);
int vhost_dev_enable_notifiers(struct vhost_dev *hdev, VirtIODevice *vdev);
-1
View File
@@ -37,7 +37,6 @@ struct VirtIOBlkConf
char *serial;
uint32_t scsi;
uint32_t config_wce;
uint32_t data_plane;
uint32_t request_merging;
};
+5
View File
@@ -59,6 +59,11 @@ typedef struct VirtioBusClass {
* This is called by virtio-bus just after the device is plugged.
*/
void (*device_plugged)(DeviceState *d, Error **errp);
/*
* Re-evaluate setup after feature bits have been validated
* by the device backend.
*/
void (*post_plugged)(DeviceState *d, Error **errp);
/*
* transport independent exit function.
* This is called by virtio-bus just before the device is unplugged.
+16
View File
@@ -439,4 +439,20 @@ static inline int xen_xc_domain_add_to_physmap(XenXC xch, uint32_t domid,
}
#endif
#if CONFIG_XEN_CTRL_INTERFACE_VERSION < 470
static inline int xen_domain_create(XenXC xc, uint32_t ssidref,
xen_domain_handle_t handle, uint32_t flags,
uint32_t *pdomid)
{
return xc_domain_create(xc, ssidref, handle, flags, pdomid);
}
#else
static inline int xen_domain_create(XenXC xc, uint32_t ssidref,
xen_domain_handle_t handle, uint32_t flags,
uint32_t *pdomid)
{
return xc_domain_create(xc, ssidref, handle, flags, pdomid, NULL);
}
#endif
#endif /* QEMU_HW_XEN_COMMON_H */
+11 -5
View File
@@ -14,11 +14,16 @@
#ifndef QEMU_JSON_LEXER_H
#define QEMU_JSON_LEXER_H
#include "qapi/qmp/qstring.h"
#include "qapi/qmp/qlist.h"
#include "glib-compat.h"
typedef enum json_token_type {
JSON_OPERATOR = 100,
JSON_MIN = 100,
JSON_LCURLY = JSON_MIN,
JSON_RCURLY,
JSON_LSQUARE,
JSON_RSQUARE,
JSON_COLON,
JSON_COMMA,
JSON_INTEGER,
JSON_FLOAT,
JSON_KEYWORD,
@@ -30,13 +35,14 @@ typedef enum json_token_type {
typedef struct JSONLexer JSONLexer;
typedef void (JSONLexerEmitter)(JSONLexer *, QString *, JSONTokenType, int x, int y);
typedef void (JSONLexerEmitter)(JSONLexer *, GString *,
JSONTokenType, int x, int y);
struct JSONLexer
{
JSONLexerEmitter *emit;
int state;
QString *token;
GString *token;
int x, y;
};
+2 -2
View File
@@ -18,7 +18,7 @@
#include "qapi/qmp/qlist.h"
#include "qapi/error.h"
QObject *json_parser_parse(QList *tokens, va_list *ap);
QObject *json_parser_parse_err(QList *tokens, va_list *ap, Error **errp);
QObject *json_parser_parse(GQueue *tokens, va_list *ap);
QObject *json_parser_parse_err(GQueue *tokens, va_list *ap, Error **errp);
#endif
+12 -4
View File
@@ -14,21 +14,29 @@
#ifndef QEMU_JSON_STREAMER_H
#define QEMU_JSON_STREAMER_H
#include "qapi/qmp/qlist.h"
#include <stdint.h>
#include "glib-compat.h"
#include "qapi/qmp/json-lexer.h"
typedef struct JSONToken {
int type;
int x;
int y;
char str[];
} JSONToken;
typedef struct JSONMessageParser
{
void (*emit)(struct JSONMessageParser *parser, QList *tokens);
void (*emit)(struct JSONMessageParser *parser, GQueue *tokens);
JSONLexer lexer;
int brace_count;
int bracket_count;
QList *tokens;
GQueue *tokens;
uint64_t token_size;
} JSONMessageParser;
void json_message_parser_init(JSONMessageParser *parser,
void (*func)(JSONMessageParser *, QList *));
void (*func)(JSONMessageParser *, GQueue *));
int json_message_parser_feed(JSONMessageParser *parser,
const char *buffer, size_t size);
+2
View File
@@ -3,6 +3,8 @@
#include "qemu-common.h"
size_t qemu_fd_getpagesize(int fd);
void *qemu_ram_mmap(int fd, size_t size, size_t align, bool shared);
void qemu_ram_munmap(void *ptr, size_t size);
+4
View File
@@ -256,6 +256,10 @@ static inline void qemu_timersub(const struct timeval *val1,
void qemu_set_cloexec(int fd);
/* QEMU "hardware version" setting. Used to replace code that exposed
* QEMU_VERSION to guests in the past and need to keep compatibilty.
* Do not use qemu_hw_version() in new code.
*/
void qemu_set_hw_version(const char *);
const char *qemu_hw_version(void);
+6 -7
View File
@@ -3,7 +3,6 @@
/* A load of opaque types so that device init declarations don't have to
pull in all the real definitions. */
struct Monitor;
/* Please keep this list in alphabetical order */
typedef struct AdapterInfo AdapterInfo;
@@ -19,8 +18,8 @@ typedef struct BusState BusState;
typedef struct CharDriverState CharDriverState;
typedef struct CompatProperty CompatProperty;
typedef struct CPUAddressSpace CPUAddressSpace;
typedef struct DeviceState DeviceState;
typedef struct DeviceListener DeviceListener;
typedef struct DeviceState DeviceState;
typedef struct DisplayChangeListener DisplayChangeListener;
typedef struct DisplayState DisplayState;
typedef struct DisplaySurface DisplaySurface;
@@ -46,6 +45,7 @@ typedef struct MigrationIncomingState MigrationIncomingState;
typedef struct MigrationParams MigrationParams;
typedef struct MigrationState MigrationState;
typedef struct Monitor Monitor;
typedef struct MonitorDef MonitorDef;
typedef struct MouseTransformInfo MouseTransformInfo;
typedef struct MSIMessage MSIMessage;
typedef struct NetClientState NetClientState;
@@ -63,13 +63,13 @@ typedef struct PCIESlot PCIESlot;
typedef struct PCIExpressDevice PCIExpressDevice;
typedef struct PCIExpressHost PCIExpressHost;
typedef struct PCIHostState PCIHostState;
typedef struct PCMachineState PCMachineState;
typedef struct PCMachineClass PCMachineClass;
typedef struct PCMachineState PCMachineState;
typedef struct PCMCIACardState PCMCIACardState;
typedef struct PixelFormat PixelFormat;
typedef struct PostcopyDiscardState PostcopyDiscardState;
typedef struct PropertyInfo PropertyInfo;
typedef struct Property Property;
typedef struct PropertyInfo PropertyInfo;
typedef struct QEMUBH QEMUBH;
typedef struct QemuConsole QemuConsole;
typedef struct QEMUFile QEMUFile;
@@ -78,10 +78,10 @@ typedef struct QemuOpts QemuOpts;
typedef struct QemuOptsList QemuOptsList;
typedef struct QEMUSGList QEMUSGList;
typedef struct QEMUSizedBuffer QEMUSizedBuffer;
typedef struct QEMUTimerListGroup QEMUTimerListGroup;
typedef struct QEMUTimer QEMUTimer;
typedef struct Range Range;
typedef struct QEMUTimerListGroup QEMUTimerListGroup;
typedef struct RAMBlock RAMBlock;
typedef struct Range Range;
typedef struct SerialState SerialState;
typedef struct SHPCDevice SHPCDevice;
typedef struct SMBusDevice SMBusDevice;
@@ -89,6 +89,5 @@ typedef struct SSIBus SSIBus;
typedef struct uWireSlave uWireSlave;
typedef struct VirtIODevice VirtIODevice;
typedef struct Visitor Visitor;
typedef struct MonitorDef MonitorDef;
#endif /* QEMU_TYPEDEFS_H */
Loaded 100 of 196 files, more files were not shown because too many files have changed in this diff. Show more