Compare commits

..
165 Commits
Author SHA1 Message Date
Michael Roth 1dfcf652e6 Update version for 3.0.1 release
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-11 22:27:39 -05:00
Ilya Maximets a4a5021413 vhost-user: Fix userfaultfd leak
'fd' received from the vhost side is never freed.
Also, everything (including 'postcopy_listen' state) should be
cleaned up on vhost cleanup.

Fixes: 46343570c0 ("vhost+postcopy: Wire up POSTCOPY_END notify")
Fixes: f82c11165f ("vhost+postcopy: Register shared ufd with postcopy")
Cc: qemu-stable@nongnu.org
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Message-Id: <20181008160536.6332-3-i.maximets@samsung.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
(cherry picked from commit c4f753859a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-08 16:50:20 -05:00
Ilya Maximets a0380bdae9 vhost-user: Don't ask for reply on postcopy mem table set
According to documentation, NEED_REPLY_MASK should not be set
for VHOST_USER_SET_MEM_TABLE request in postcopy mode.
This restriction was mistakenly applied to 'reply_supported'
variable, which is local and used only for non-postcopy case.

CC: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixes: 9bb3801994 ("vhost+postcopy: Send address back to qemu")
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Message-Id: <20181002140947.4107-1-i.maximets@samsung.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
(cherry picked from commit 5ce43896e1)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-08 16:47:37 -05:00
Prasad J Pandit 8d25276172 ppc/pnv: check size before data buffer access
While performing PowerNV memory r/w operations, the access length
'sz' could exceed the data[4] buffer size. Add check to avoid OOB
access.

Reported-by: Moguofang <moguofang@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
(cherry picked from commit d07945e78e)
*CVE-2018-18954
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-02 13:17:03 -05:00
Prasad J Pandit 345fab6ffe slirp: check data length while emulating ident function
While emulating identification protocol, tcp_emu() does not check
available space in the 'sc_rcv->sb_data' buffer. It could lead to
heap buffer overflow issue. Add check to avoid it.

Reported-by: Kira <864786842@qq.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
(cherry picked from commit a7104eda7d)
*CVE-2019-6778
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-02 13:16:34 -05:00
Prasad J Pandit bd6dd4eaa6 lsi53c895a: check message length value is valid
While writing a message in 'lsi_do_msgin', message length value
in 'msg_len' could be invalid due to an invalid migration stream.
Add an assertion to avoid an out of bounds access, and reject
the incoming migration data if it contains an invalid message
length.

Discovered by Deja vu Security. Reported by Oracle.

Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <20181026194314.18663-1-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit e58ccf0396)
*CVE-2018-18849
*avoid context dep. on c921370b22
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-02 13:15:18 -05:00
Marc-André Lureau f43a6b314a seccomp: set the seccomp filter to all threads
When using "-seccomp on", the seccomp policy is only applied to the
main thread, the vcpu worker thread and other worker threads created
after seccomp policy is applied; the seccomp policy is not applied to
e.g. the RCU thread because it is created before the seccomp policy is
applied and SECCOMP_FILTER_FLAG_TSYNC isn't used.

This can be verified with
for task in /proc/`pidof qemu`/task/*; do cat $task/status | grep Secc ; done
Seccomp:	2
Seccomp:	0
Seccomp:	0
Seccomp:	2
Seccomp:	2
Seccomp:	2

Starting with libseccomp 2.2.0 and kernel >= 3.17, we can use
seccomp_attr_set(ctx, > SCMP_FLTATR_CTL_TSYNC, 1) to update the policy
on all threads.

libseccomp requirement was bumped to 2.2.0 in previous patch.
libseccomp should fail to set the filter if it can't honour
SCMP_FLTATR_CTL_TSYNC (untested), and thus -sandbox will now fail on
kernel < 3.17.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Eduardo Otubo <otubo@redhat.com>
(cherry picked from commit 70dfabeaa7)
*CVE-2018-15746
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-02 13:11:49 -05:00
Marc-André Lureau 9d01327689 configure: require libseccomp 2.2.0
The following patch is going to require TSYNC, which is only available
since libseccomp 2.2.0.

libseccomp 2.2.0 was released February 12, 2015.

According to repology, libseccomp version in different distros:

  RHEL-7: 2.3.1
  Debian (Stretch): 2.3.1
  OpenSUSE Leap 15: 2.3.2
  Ubuntu (Xenial):  2.3.1

This will drop support for -sandbox on:

  Debian (Jessie): 2.1.1 (but 2.2.3 in backports)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Eduardo Otubo <otubo@redhat.com>
(cherry picked from commit d0699bd37c)
*CVE-2018-15746
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-02 13:11:31 -05:00
Marc-André Lureau 9ad3314fa3 seccomp: prefer SCMP_ACT_KILL_PROCESS if available
The upcoming libseccomp release should have SCMP_ACT_KILL_PROCESS
action (https://github.com/seccomp/libseccomp/issues/96).

SCMP_ACT_KILL_PROCESS is preferable to immediately terminate the
offending process, rather than having the SIGSYS handler running.

Use SECCOMP_GET_ACTION_AVAIL to check availability of kernel support,
as libseccomp will fallback on SCMP_ACT_KILL otherwise, and we still
prefer SCMP_ACT_TRAP.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Eduardo Otubo <otubo@redhat.com>
(cherry picked from commit bda08a5764)
*CVE-2018-15746
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-02 13:11:03 -05:00
Marc-André Lureau 8eba63e1d2 seccomp: use SIGSYS signal instead of killing the thread
The seccomp action SCMP_ACT_KILL results in immediate termination of
the thread that made the bad system call. However, qemu being
multi-threaded, it keeps running. There is no easy way for parent
process / management layer (libvirt) to know about that situation.

Instead, the default SIGSYS handler when invoked with SCMP_ACT_TRAP
will terminate the program and core dump.

This may not be the most secure solution, but probably better than
just killing the offending thread. SCMP_ACT_KILL_PROCESS has been
added in Linux 4.14 to improve the situation, which I propose to use
by default if available in the next patch.

Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1594456

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Eduardo Otubo <otubo@redhat.com>
(cherry picked from commit 6f2231e9b0)
*CVE-2018-15746
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-02 13:10:37 -05:00
Gerd Hoffmann 7347a04da3 usb-mtp: use O_NOFOLLOW and O_CLOEXEC.
Open files and directories with O_NOFOLLOW to avoid symlinks attacks.
While being at it also add O_CLOEXEC.

usb-mtp only handles regular files and directories and ignores
everything else, so users should not see a difference.

Because qemu ignores symlinks, carrying out a successful symlink attack
requires swapping an existing file or directory below rootdir for a
symlink and winning the race against the inotify notification to qemu.

Fixes: CVE-2018-16872
Cc: Prasad J Pandit <ppandit@redhat.com>
Cc: Bandan Das <bsd@redhat.com>
Reported-by: Michael Hanselmann <public@hansmi.ch>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael Hanselmann <public@hansmi.ch>
Message-id: 20181213122511.13853-1-kraxel@redhat.com
(cherry picked from commit bab9df35ce)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Gerd Hoffmann 61f87388af usb-mtp: outlaw slashes in filenames
Slash is unix directory separator, so they are not allowed in filenames.
Note this also stops the classic escape via "../".

Fixes: CVE-2018-16867
Reported-by: Michael Hanselmann <public@hansmi.ch>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181203101045.27976-3-kraxel@redhat.com
(cherry picked from commit c52d46e041)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Greg Kurz d086829e5b 9p: fix QEMU crash when renaming files
When using the 9P2000.u version of the protocol, the following shell
command line in the guest can cause QEMU to crash:

    while true; do rm -rf aa; mkdir -p a/b & touch a/b/c & mv a aa; done

With 9P2000.u, file renaming is handled by the WSTAT command. The
v9fs_wstat() function calls v9fs_complete_rename(), which calls
v9fs_fix_path() for every fid whose path is affected by the change.
The involved calls to v9fs_path_copy() may race with any other access
to the fid path performed by some worker thread, causing a crash like
shown below:

Thread 12 "qemu-system-x86" received signal SIGSEGV, Segmentation fault.
0x0000555555a25da2 in local_open_nofollow (fs_ctx=0x555557d958b8, path=0x0,
 flags=65536, mode=0) at hw/9pfs/9p-local.c:59
59          while (*path && fd != -1) {
(gdb) bt
#0  0x0000555555a25da2 in local_open_nofollow (fs_ctx=0x555557d958b8,
 path=0x0, flags=65536, mode=0) at hw/9pfs/9p-local.c:59
#1  0x0000555555a25e0c in local_opendir_nofollow (fs_ctx=0x555557d958b8,
 path=0x0) at hw/9pfs/9p-local.c:92
#2  0x0000555555a261b8 in local_lstat (fs_ctx=0x555557d958b8,
 fs_path=0x555556b56858, stbuf=0x7fff84830ef0) at hw/9pfs/9p-local.c:185
#3  0x0000555555a2b367 in v9fs_co_lstat (pdu=0x555557d97498,
 path=0x555556b56858, stbuf=0x7fff84830ef0) at hw/9pfs/cofile.c:53
#4  0x0000555555a1e9e2 in v9fs_stat (opaque=0x555557d97498)
 at hw/9pfs/9p.c:1083
#5  0x0000555555e060a2 in coroutine_trampoline (i0=-669165424, i1=32767)
 at util/coroutine-ucontext.c:116
#6  0x00007fffef4f5600 in __start_context () at /lib64/libc.so.6
#7  0x0000000000000000 in  ()
(gdb)

The fix is to take the path write lock when calling v9fs_complete_rename(),
like in v9fs_rename().

Impact:  DoS triggered by unprivileged guest users.

Fixes: CVE-2018-19489
Cc: P J P <ppandit@redhat.com>
Reported-by: zhibin hu <noirfate@gmail.com>
Reviewed-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
(cherry picked from commit 1d20398694)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Paolo Bonzini e49f868dc0 nvme: fix out-of-bounds access to the CMB
Because the CMB BAR has a min_access_size of 2, if you read the last
byte it will try to memcpy *2* bytes from n->cmbuf, causing an off-by-one
error.  This is CVE-2018-16847.

Another way to fix this might be to register the CMB as a RAM memory
region, which would also be more efficient.  However, that might be a
change for big-endian machines; I didn't think this through and I don't
know how real hardware works.  Add a basic testcase for the CMB in case
somebody does this change later on.

Cc: Keith Busch <keith.busch@intel.com>
Cc: qemu-block@nongnu.org
Reported-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Tested-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 87ad860c62)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Daniel Henrique Barboza 2c4f6cabf5 qga: update docs with systemd suspend support info
Commit 067927d62e ("qga: systemd hibernate/suspend/hybrid-sleep
support") failed to update qapi-schema.json after adding systemd
hibernate/suspend/hybrid-sleep capabilities to guest-suspend-* QGA
commands.

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
(cherry picked from commit bb6c8d407e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Eric Blake 5d64550dc5 bitmap: Update count after a merge
We need an accurate count of the number of bits set in a bitmap
after a merge. In particular, since the merge operation short-circuits
a merge from an empty source, if you have bitmaps A, B, and C where
B started empty, then merge C into B, and B into A, an inaccurate
count meant that A did not get the contents of C.

In the worst case, we may falsely regard the bitmap as empty when
it has had new writes merged into it.

Fixes: be58721db
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20181002233314.30159-1-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
(cherry picked from commit d1dde7149e)
*drop functional dep. on fa000f2f
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Liam Merwick 7b8e8ff009 tpm_tis: fix loop that cancels any seizure by a lower locality
In tpm_tis_mmio_write() if the requesting locality is seizing
access, any seizure by a lower locality is cancelled.  However the
loop doing the seizure had an off-by-one error and the locality
immediately preceding the requesting locality was not being cleared.
This is fixed by adjusting the test in the for loop to check the
localities up to the requesting locality.

Signed-off-by: Liam Merwick <Liam.Merwick@oracle.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
(cherry picked from commit 37b55d67c0)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
William Bowling 690bb48e40 slirp: check sscanf result when emulating ident
When emulating ident in tcp_emu, if the strchr checks passed but the
sscanf check failed, two uninitialized variables would be copied and
sent in the reply, so move this code inside the if(sscanf()) clause.

Signed-off-by: William Bowling <will@wbowling.info>
Cc: qemu-stable@nongnu.org
Cc: secalert@redhat.com
Message-Id: <1551476756-25749-1-git-send-email-will@wbowling.info>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
(cherry picked from commit d3222975c7)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Marcel Apfelbaum f3200c4c20 hw/rdma: another clang compilation fix
Configuring QEMU with:
   configure --target-list="x86_64-softmmu" --cc=clang --enable-pvrdma
Results in:
   qemu/hw/rdma/rdma_rm_defs.h:108:3: error: redefinition of typedef 'RdmaDeviceResources' is a C11 feature [-Werror,-Wtypedef-redefinition]
   } RdmaDeviceResources;
     ^
   qemu/hw/rdma/rdma_backend_defs.h:24:36: note: previous definition is here
   typedef struct RdmaDeviceResources RdmaDeviceResources;

Fix by removing one of the 'typedef' definitions.

Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20190214154053.15050-1-marcel.apfelbaum@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
(cherry picked from commit 59f911938f)
*drop context dep. on c2dd117b38
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Stefan Berger 2251d74275 acpi: Make TPM 2.0 with TIS available as MSFT0101
This is a backport of rev 24cf5413aa to 3.0.x and 3.1.x.

This patch makes the a TPM 2.0 with TIS interface available under the
HID 'MSF0101'. This is supported by Linux and also Windows now
recognizes the TPM 2.0 with TIS interface. Leave the TPM 1.2 as before.

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Kevin Wolf 9f9a3548d3 block: Fix invalidate_cache error path for parent activation
bdrv_co_invalidate_cache() clears the BDRV_O_INACTIVE flag before
actually activating a node so that the correct permissions etc. are
taken. In case of errors, the flag must be restored so that the next
call to bdrv_co_invalidate_cache() retries activation.

Restoring the flag was missing in the error path for a failed
parent->role->activate() call. The consequence is that this attempt to
activate all images correctly fails because we still set errp, however
on the next attempt BDRV_O_INACTIVE is already clear, so we return
success without actually retrying the failed action.

An example where this is observable in practice is migration to a QEMU
instance that has a raw format block node attached to a guest device
with share-rw=off (the default) while another process holds
BLK_PERM_WRITE for the same image. In this case, all activation steps
before parent->role->activate() succeed because raw can tolerate other
writers to the image. Only the parent callback (in particular
blk_root_activate()) tries to implement the share-rw=on property and
requests exclusive write permissions. This fails when the migration
completes and correctly displays an error. However, a manual 'cont' will
incorrectly resume the VM without calling blk_root_activate() again.

This case is described in more detail in the following bug report:
https://bugzilla.redhat.com/show_bug.cgi?id=1531888

Fix this by correctly restoring the BDRV_O_INACTIVE flag in the error
path.

Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 78fc3b3a26)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Stefan Berger 4afb0370b9 tpm: Make sure the locality received from backend is valid
Make sure that the locality passed from the backend to
tpm_tis_request_completed() is valid.

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
(cherry picked from commit a639f96111)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Stefan Berger 66160b7aeb tpm: Make sure new locality passed to tpm_tis_prep_abort() is valid
Make sure that the new locality passed to tpm_tis_prep_abort()
is valid.

Add a comment to aborting_locty that it may be any locality, including
TPM_TIS_NO_LOCALITY.

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
(cherry picked from commit e92b63ea61)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Prasad J Pandit 3fd92155fd tpm: use loop iterator to set sts data field
When TIS request is done, set 'sts' data field across all localities.

Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
(cherry picked from commit 6a50bb98f2)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Stefan Berger 69ec5ee5ac tpm: Zero-init structure to avoid uninitialized variables in valgrind log
Zero-init the ptm_loc structure so that we don't have fields that
are not initialised.

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
(cherry picked from commit eff1fe9fd0)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Peter Maydell 16d1300e1a exec.c: Don't reallocate IOMMUNotifiers that are in use
The tcg_register_iommu_notifier() code has a GArray of
TCGIOMMUNotifier structs which it has registered by passing
memory_region_register_iommu_notifier() a pointer to the embedded
IOMMUNotifier field. Unfortunately, if we need to enlarge the
array via g_array_set_size() this can cause a realloc(), which
invalidates the pointer that memory_region_register_iommu_notifier()
put into the MemoryRegion's iommu_notify list. This can result
in segfaults.

Switch the GArray to holding pointers to the TCGIOMMUNotifier
structs, so that we can individually allocate and free them.

Cc: qemu-stable@nongnu.org
Fixes: 1f871c5e6b ("exec.c: Handle IOMMUs in address_space_translate_for_iotlb()")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190128174241.5860-1-peter.maydell@linaro.org
(cherry picked from commit 5601be3b01)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Janosch Frank 1c9b86daec s390x: Return specification exception for unimplemented diag 308 subcodes
The architecture specifies specification exceptions for all
unavailable subcodes.

The presence of subcodes is indicated by checking some query subcode.
For example 6 will indicate that 3-6 are available. So future systems
might call new subcodes to check for new features. This should not
trigger a hw error, instead we return the architectured specification
exception.

Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Cc: qemu-stable@nongnu.org
Message-Id: <20190111113657.66195-3-frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
(cherry picked from commit 37dbd1f4d4)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Peter Maydell 422bf25df1 linux-user: make pwrite64/pread64(fd, NULL, 0, offset) return 0
Linux returns success if pwrite64() or pread64() are called with a
zero length NULL buffer, but QEMU was returning -TARGET_EFAULT.

This is the same bug that we fixed in commit 58cfa6c2e6
for the write syscall, and long before that in 38d840e679
for the read syscall.

Fixes: https://bugs.launchpad.net/qemu/+bug/1810433

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190108184900.9654-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
(cherry picked from commit 2bd3f8998e)
*drop functional dep. on 2852aafd9d
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Tony Garnock-Jones 89d2237683 linux-user: write(fd, NULL, 0) parity with linux's treatment of same
Bring linux-user write(2) handling into line with linux for the case
of a 0-byte write with a NULL buffer. Based on a patch originally
written by Zhuowei Zhang.

Addresses https://bugs.launchpad.net/qemu/+bug/1716292.

>From Zhuowei Zhang's patch (https://lists.gnu.org/archive/html/qemu-devel/2017-09/msg08073.html):

    Linux returns success for the special case of calling write with a
    zero-length NULL buffer: compiling and running

    int main() {
       ssize_t ret = write(STDOUT_FILENO, NULL, 0);
       fprintf(stderr, "write returned %ld\n", ret);
       return 0;
    }

    gives "write returned 0" when run directly, but "write returned
    -1" in QEMU.

    This commit checks for this situation and returns success if
    found.

Subsequent discussion raised the following questions (and my answers):

 - Q. Should TARGET_NR_read pass through to safe_read in this
      situation too?
   A. I'm wary of changing unrelated code to the specific problem I'm
      addressing. TARGET_NR_read is already consistent with Linux for
      this case.

 - Q. Do pread64/pwrite64 need to be changed similarly?
   A. Experiment suggests not: both linux and linux-user yield -1 for
      NULL 0-length reads/writes.

Signed-off-by: Tony Garnock-Jones <tonygarnockjones@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180908182205.GB409@mornington.dcs.gla.ac.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
(cherry picked from commit 58cfa6c2e6)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Thomas Huth 1f79226d22 hw/s390x: Fix bad mask in time2tod()
Since "s390x/tcg: avoid overflows in time2tod/tod2time", the
time2tod() function tries to deal with the 9 uppermost bits in the
time value, but uses the wrong mask for this: 0xff80000000000000 should
be used instead of 0xff10000000000000 here.

Fixes: 14055ce53c
Cc: qemu-stable@nongnu.org
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1544792887-14575-1-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
[CH: tweaked commit message]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
(cherry picked from commit aba7a5a2de)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Corey Minyard 02db60391f pc:piix4: Update smbus I/O space after a migration
Otherwise it won't be set up correctly and won't work after
miigration.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 2b4e573c7c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Zheng Xiang 9d61beac23 pcie: set link state inactive/active after hot unplug/plug
When VM boots from the latest version of linux kernel, after
hot-unpluging virtio-blk disks which are hotplugged into
pcie-root-port, the VM's dmesg log shows:

[  151.046242] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0001 from Slot Status
[  151.046365] pciehp 0000:00:05.0:pcie004: Slot(0-3): Attention button pressed
[  151.046369] pciehp 0000:00:05.0:pcie004: Slot(0-3): Powering off due to button press
[  151.046420] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status
[  151.046425] pciehp 0000:00:05.0:pcie004: pciehp_green_led_blink: SLOTCTRL a8 write cmd 200
[  151.046464] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status
[  151.046468] pciehp 0000:00:05.0:pcie004: pciehp_set_attention_status: SLOTCTRL a8 write cmd c0
[  156.163421] pciehp 0000:00:05.0:pcie004: pciehp_get_power_status: SLOTCTRL a8 value read 2f1
[  156.163427] pciehp 0000:00:05.0:pcie004: pciehp_unconfigure_device: domain:bus:dev = 0000:06:00
[  156.198736] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status
[  156.198772] pciehp 0000:00:05.0:pcie004: pciehp_power_off_slot: SLOTCTRL a8 write cmd 400
[  157.224124] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0018 from Slot Status
[  157.224194] pciehp 0000:00:05.0:pcie004: pciehp_green_led_off: SLOTCTRL a8 write cmd 300
[  157.224220] pciehp 0000:00:05.0:pcie004: pciehp_check_link_active: lnk_status = 2011
[  157.224223] pciehp 0000:00:05.0:pcie004: Slot(0-3): Link Up
[  157.224233] pciehp 0000:00:05.0:pcie004: pciehp_get_power_status: SLOTCTRL a8 value read 7f1
[  157.224281] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status
[  157.224285] pciehp 0000:00:05.0:pcie004: pciehp_power_on_slot: SLOTCTRL a8 write cmd 0
[  157.224300] pciehp 0000:00:05.0:pcie004: __pciehp_link_set: lnk_ctrl = 0
[  157.224336] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status
[  157.224339] pciehp 0000:00:05.0:pcie004: pciehp_green_led_blink: SLOTCTRL a8 write cmd 200
[  159.739294] pci 0000:06:00.0 id reading try 50 times with interval 20 ms to get ffffffff
[  159.739315] pciehp 0000:00:05.0:pcie004: pciehp_check_link_status: lnk_status = 2011
[  159.739318] pciehp 0000:00:05.0:pcie004: Failed to check link status
[  159.739371] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status
[  159.739394] pciehp 0000:00:05.0:pcie004: pciehp_power_off_slot: SLOTCTRL a8 write cmd 400
[  160.771426] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status
[  160.771452] pciehp 0000:00:05.0:pcie004: pciehp_green_led_off: SLOTCTRL a8 write cmd 300
[  160.771495] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status
[  160.771499] pciehp 0000:00:05.0:pcie004: pciehp_set_attention_status: SLOTCTRL a8 write cmd 40
[  160.771535] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status
[  160.771539] pciehp 0000:00:05.0:pcie004: pciehp_green_led_off: SLOTCTRL a8 write cmd 300

After analyzing the log information, it seems that qemu doesn't
change the Link Status from active to inactive after hot-unplug.
This results in the abnormal log after the linux kernel commit
d331710ea78fea merged.

Furthermore, If I hotplug the same virtio-blk disk after hot-unplug,
the virtio-blk would turn on and then back off.

So this patch set the Link Status inactive after hot-unplug and
active after hot-plug.

Signed-off-by: Zheng Xiang <zhengxiang9@huawei.com>
Signed-off-by: Zheng Xiang <xiang.zheng@linaro.org>
Cc: Wang Haibin <wanghaibin.wang@huawei.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 2f2b18f60b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Paul A. Clarke 2ce4635d9b Changes requirement for "vsubsbs" instruction
Changes requirement for "vsubsbs" instruction, which has been supported
since ISA 2.03. (Please see section 5.9.1.2 of ISA 2.03)

Reported-by: Paul A. Clarke <pc@us.ibm.com>
Signed-off-by: Paul A. Clarke <pc@us.ibm.com>
Signed-off-by: Leonardo Bras <leonardo@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
(cherry picked from commit fcfbc18d00)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Christian Borntraeger fc50e1fa79 iotests: make 235 work on s390 (and others)
"-machine pc" will not work all architectures. Lets fall back to the
default machine by not specifying it.

In addition we also need to specify -no-shutdown on s390 as qemu will
exit otherwise.

Cc: qemu-stable@nongnu.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 2c26e648e4)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Vladimir Sementsov-Ogievskiy e47e19ed21 iotests: simple mirror test with kvm on 1G image
This test is broken without previous commit fixing dead-lock in mirror.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Acked-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit db5e8210ad)
*drop context deps from test groups not in 3.0
*modify expected QMP output to match encoding for 3.0
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Vladimir Sementsov-Ogievskiy d02d6dd710 mirror: fix dead-lock
Let start from the beginning:

Commit b9e413dd37 (in 2.9)
"block: explicitly acquire aiocontext in aio callbacks that need it"
added pairs of aio_context_acquire/release to mirror_write_complete and
mirror_read_complete, when they were aio callbacks for blk_aio_* calls.

Then, commit 2e1990b26e (in 3.0) "block/mirror: Convert to coroutines"
dropped these blk_aio_* calls, than mirror_write_complete and
mirror_read_complete are not callbacks more, and don't need additional
aiocontext acquiring. Furthermore, mirror_read_complete calls
blk_co_pwritev inside these pair of aio_context_acquire/release, which
leads to the following dead-lock with mirror:

 (gdb) info thr
   Id   Target Id         Frame
   3    Thread (LWP 145412) "qemu-system-x86" syscall ()
   2    Thread (LWP 145416) "qemu-system-x86" __lll_lock_wait ()
 * 1    Thread (LWP 145411) "qemu-system-x86" __lll_lock_wait ()

 (gdb) bt
 #0  __lll_lock_wait ()
 #1  _L_lock_812 ()
 #2  __GI___pthread_mutex_lock
 #3  qemu_mutex_lock_impl (mutex=0x561032dce420 <qemu_global_mutex>,
     file=0x5610327d8654 "util/main-loop.c", line=236) at
     util/qemu-thread-posix.c:66
 #4  qemu_mutex_lock_iothread_impl
 #5  os_host_main_loop_wait (timeout=480116000) at util/main-loop.c:236
 #6  main_loop_wait (nonblocking=0) at util/main-loop.c:497
 #7  main_loop () at vl.c:1892
 #8  main

Printing contents of qemu_global_mutex, I see that "__owner = 145416",
so, thr1 is main loop, and now it wants BQL, which is owned by thr2.

 (gdb) thr 2
 (gdb) bt
 #0  __lll_lock_wait ()
 #1  _L_lock_870 ()
 #2  __GI___pthread_mutex_lock
 #3  qemu_mutex_lock_impl (mutex=0x561034d25dc0, ...
 #4  aio_context_acquire (ctx=0x561034d25d60)
 #5  dma_blk_cb
 #6  dma_blk_io
 #7  dma_blk_read
 #8  ide_dma_cb
 #9  bmdma_cmd_writeb
 #10 bmdma_write
 #11 memory_region_write_accessor
 #12 access_with_adjusted_size
 #15 flatview_write
 #16 address_space_write
 #17 address_space_rw
 #18 kvm_handle_io
 #19 kvm_cpu_exec
 #20 qemu_kvm_cpu_thread_fn
 #21 qemu_thread_start
 #22 start_thread
 #23 clone ()

Printing mutex in fr 2, I see "__owner = 145411", so thr2 wants aio
context mutex, which is owned by thr1. Classic dead-lock.

Then, let's check that aio context is hold by mirror coroutine: just
print coroutine stack of first tracked request in mirror job target:

 (gdb) [...]
 (gdb) qemu coroutine 0x561035dd0860
 #0  qemu_coroutine_switch
 #1  qemu_coroutine_yield
 #2  qemu_co_mutex_lock_slowpath
 #3  qemu_co_mutex_lock
 #4  qcow2_co_pwritev
 #5  bdrv_driver_pwritev
 #6  bdrv_aligned_pwritev
 #7  bdrv_co_pwritev
 #8  blk_co_pwritev
 #9  mirror_read_complete () at block/mirror.c:232
 #10 mirror_co_read () at block/mirror.c:370
 #11 coroutine_trampoline
 #12 __start_context

Yes it is mirror_read_complete calling blk_co_pwritev after acquiring
aio context.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit d12ade5732)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Eric Blake 32e0caf8ff nbd/client: Send NBD_CMD_DISC if open fails after connect
If nbd_client_init() fails after we are already connected,
then the server will spam logs with:

Disconnect client, due to: Unexpected end-of-file before all bytes were read

unless we gracefully disconnect before closing the connection.

Ways to trigger this:

$ opts=driver=nbd,export=foo,server.type=inet,server.host=localhost,server.port=10809
$  qemu-img map --output=json --image-opts $opts,read-only=off
$  qemu-img map --output=json --image-opts $opts,x-dirty-bitmap=nosuch:

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181130023232.3079982-4-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
(cherry picked from commit c688e6ca7b)
*drop functional dep. on 6c2e581d4d
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Eric Blake 38490efee0 nbd/client: Make x-dirty-bitmap more reliable
The implementation of x-dirty-bitmap in qemu 3.0 (commit 216ee365)
silently falls back to treating the server as not supporting
NBD_CMD_BLOCK_STATUS if a requested meta_context name was not
negotiated, which in turn means treating the _entire_ image as
data. Since our hack relied on using 'qemu-img map' to view
which portions of the image were dirty by seeing what the
redirected bdrv_block_status() treats as holes, this means
that our fallback treats the entire image as clean.  Better
would have been to treat the entire image as dirty, or to fail
to connect because the user's request for a specific context
could not be honored. This patch goes with the latter.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181130023232.3079982-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
(cherry picked from commit 47829c4079)
*avoid context dep. on 6c2e581d
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Eric Blake e13f56a154 nbd/server: Advertise all contexts in response to bare LIST
The NBD spec, and even our code comment, says that if the client
asks for NBD_OPT_LIST_META_CONTEXT with 0 queries, then we should
reply with (a possibly-compressed representation of) ALL contexts
that we are willing to let them try.  But commit 3d068aff forgot
to advertise qemu:dirty-bitmap:FOO.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181130023232.3079982-2-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
(cherry picked from commit e31d802479)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Corey Minyard a69e9049d6 i2c: Add a length check to the SMBus write handling
Avoid an overflow.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: QEMU Stable <qemu-stable@nongnu.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 629457a130)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
BALATON Zoltan 22acdb9937 i2c: Move typedef of bitbang_i2c_interface to i2c.h
Clang 3.4 considers duplicate typedef in ppc4xx_i2c.h and
bitbang_i2c.h an error even if they are identical. Move it to a common
place to allow building with this clang version.

Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 2b4c1125ac)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Markus Armbruster 93ef995b2c vfio-helpers: Fix qemu_vfio_open_pci() crash
qemu_vfio_open_common() initializes s->lock only after passing s to
qemu_vfio_dma_map() via qemu_vfio_init_ramblock().
qemu_vfio_dma_map() tries to lock the uninitialized lock and crashes.

Fix by initializing s->lock first.

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1645840
Fixes: 418026ca43
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20181127084143.1113-1-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 549b50a31d)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Gerd Hoffmann e31de8e7bb fmops: fix off-by-one in AR_TABLE and DR_TABLE array size
Cc: P J P <ppandit@redhat.com>
Reported-by: Wangjunqing <wangjunqing@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181030082340.17170-1-kraxel@redhat.com
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 57ac4a7a28)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Max Reitz c192d40267 qemu-img: Fix leak
create_opts was leaked here.  This is not too bad since the process is
about to exit anyway, but relying on that does not make the code nicer
to read.

Fixes: d402b6a21a
Reported-by: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 3ecd5a4f19)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Max Reitz a36defa3c8 qemu-img: Fix typo
Fixes: d402b6a21a
Reported-by: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit f0998879e0)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Mark Cave-Ayland 81e38ad8d0 fdc: fix segfault in fdctrl_stop_transfer() when DMA is disabled
Commit c8a35f1cf0 "fdc: use IsaDma interface instead of global DMA_*
functions" accidentally introduced a segfault in fdctrl_stop_transfer() for
non-DMA transfers.

If fdctrl->dma_chann has not been configured then the fdctrl->dma interface
reference isn't initialised during isabus_fdc_realize(). Unfortunately
fdctrl_stop_transfer() unconditionally references the DMA interface when
finishing the transfer causing a NULL pointer dereference.

Fix the issue by adding a check in fdctrl_stop_transfer() so that the DMA
interface reference and release method is only invoked if fdctrl->dma_chann
has been set.

(This issue was discovered by Martin testing a recent change in the NetBSD
installer under qemu-system-sparc)

Cc: qemu-stable@nongnu.org
Reported-by: Martin Husemann <martin@duskware.de>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 441f6692ec)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Jason Wang b528bb2840 net: drop too large packet early
We try to detect and drop too large packet (>INT_MAX) in 1592a99470
("net: ignore packet size greater than INT_MAX") during packet
delivering. Unfortunately, this is not sufficient as we may hit
another integer overflow when trying to queue such large packet in
qemu_net_queue_append_iov():

- size of the allocation may overflow on 32bit
- packet->size is integer which may overflow even on 64bit

Fixing this by moving the check to qemu_sendv_packet_async() which is
the entrance of all networking codes and reduce the limit to
NET_BUFSIZE to be more conservative. This works since:

- For the callers that call qemu_sendv_packet_async() directly, they
  only care about if zero is returned to determine whether to prevent
  the source from producing more packets. A callback will be triggered
  if peer can accept more then source could be enabled. This is
  usually used by high speed networking implementation like virtio-net
  or netmap.
- For the callers that call qemu_sendv_packet() that calls
  qemu_sendv_packet_async() indirectly, they often ignore the return
  value. In this case qemu will just the drop packets if peer can't
  receive.

Qemu will copy the packet if it was queued. So it was safe for both
kinds of the callers to assume the packet was sent.

Since we move the check from qemu_deliver_packet_iov() to
qemu_sendv_packet_async(), it would be safer to make
qemu_deliver_packet_iov() static to prevent any external user in the
future.

This is a revised patch of CVE-2018-17963.

Cc: qemu-stable@nongnu.org
Cc: Li Qiang <liq3ea@163.com>
Fixes: 1592a99470 ("net: ignore packet size greater than INT_MAX")
Reported-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20181204035347.6148-2-jasowang@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 25c01bd19d)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
Michael Roth 53a69e7ee4 make-release: add skiboot .version file
This is needed to build skiboot from tarball-distributed sources
since the git data the make_release.sh script relies on to generate
it is not available.

Cc: qemu-stable@nongnu.org
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20181109161352.29873-1-mdroth@linux.vnet.ibm.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 3fccd3f26e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-04-01 20:36:21 -05:00
yuchenlin ca1b4263d9 vhost-scsi: prevent using uninitialized vqs
There are 3 virtqueues (ctrl, event and cmd) for virtio scsi device,
but seabios will only set the physical address for the 3rd one (cmd).
Then in vhost_virtqueue_start(), virtio_queue_get_desc_addr()
will be 0 for ctrl and event vq.

In this case, ctrl and event vq are not initialized.
vhost_verify_ring_mappings may use uninitialized vhost_virtqueue
such that vhost_verify_ring_part_mapping returns ENOMEM.

When encountered this problem, we got the following logs:

    qemu-system-x86_64: Unable to map available ring for ring 0
    qemu-system-x86_64: Verify ring failure on region 0

Signed-off-by: Forrest Liu <forrestl@synology.com>
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit e6cc11d64f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-27 01:31:28 -05:00
Ilya Maximets ef862b9e8e migration: Stop postcopy fault thread before notifying
POSTCOPY_NOTIFY_INBOUND_END handlers will remove userfault fds
from the postcopy_remote_fds array which could be still in
use by the fault thread. Let's stop the thread before
notification to avoid possible accessing wrong memory.

Fixes: 46343570c0 ("vhost+postcopy: Wire up POSTCOPY_END notify")
Cc: qemu-stable@nongnu.org
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Message-Id: <20181008160536.6332-2-i.maximets@samsung.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
(cherry picked from commit 55d0fe8254)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-27 01:31:28 -05:00
Denis V. Lunev bbe21c6d30 nbd: fix NBD_FLAG_SEND_CACHE value
Commit bc37b06a5 added NBD_CMD_CACHE support, but used the wrong value
for NBD_FLAG_SEND_CACHE flag for negotiation. That commit picked bit 8,
which had already been assigned by the NBD specification to mean
NBD_FLAG_CAN_MULTI_CONN, and which was already implemented in the
Linux kernel as a part of stable userspace-kernel API since 4.10:

"bit 8, NBD_FLAG_CAN_MULTI_CONN: Indicates that the server operates
entirely without cache, or that the cache it uses is shared among all
connections to the given device. In particular, if this flag is
present, then the effects of NBD_CMD_FLUSH and NBD_CMD_FLAG_FUA
MUST be visible across all connections when the server sends its reply
to that command to the client. In the absense of this flag, clients
SHOULD NOT multiplex their commands over more than one connection to
the export.
...
bit 10, NBD_FLAG_SEND_CACHE: documents that the server understands
NBD_CMD_CACHE; however, note that server implementations exist
which support the command without advertising this bit, and
conversely that this bit does not guarantee that the command will
succeed or have an impact."

Consequences:
- a client trying to use NBD_CMD_CACHE per the NBD spec will not
see the feature as available from a qemu 3.0 server (not fatal,
clients already have to be prepared for caching to not exist)
- a client accidentally coded to the qemu 3.0 bit value instead
of following the spec may interpret NBD_CMD_CACHE as being available
when it is not (probably not fatal, the spec says the server should
gracefully fail unknown commands, and that clients of NBD_CMD_CACHE
should be prepared for failure even when the feature is advertised);
such clients are unlikely (perhaps only in unreleased Virtuozzo code),
and will disappear over time
- a client prepared to use multiple connections based on
NBD_FLAG_CAN_MULTI_CONN may cause data corruption when it assumes
that caching is consistent when in reality qemu 3.0 did not have
a consistent cache. Partially mitigated by using read-only
connections (where nothing needs to be flushed, so caching is
indeed consistent) or when using qemu-nbd with the default -e 1
(at most one client at a time); visible only when using -e 2 or
more for a writable export.

Thus the commit fixes negotiation flag in QEMU according to the
specification.

Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
CC: Valery Vdovin <valery.vdovin@acronis.com>
CC: Eric Blake <eblake@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: qemu-stable@nongnu.org
Message-Id: <20181004100313.4253-1-den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: enhance commit message, add defines for unimplemented flags]
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit df91328ada)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-27 01:31:28 -05:00
Peter Xu b7fce72779 intel_iommu: better handling of dmar state switch
QEMU is not handling the global DMAR switch well, especially when from
"on" to "off".

Let's first take the example of system reset.

Assuming that a guest has IOMMU enabled.  When it reboots, we will drop
all the existing DMAR mappings to handle the system reset, however we'll
still keep the existing memory layouts which has the IOMMU memory region
enabled.  So after the reboot and before the kernel reloads again, there
will be no mapping at all for the host device.  That's problematic since
any software (for example, SeaBIOS) that runs earlier than the kernel
after the reboot will assume the IOMMU is disabled, so any DMA from the
software will fail.

For example, a guest that boots on an assigned NVMe device might fail to
find the boot device after a system reboot/reset and we'll be able to
observe SeaBIOS errors if we capture the debugging log:

  WARNING - Timeout at nvme_wait:144!

Meanwhile, we should see DMAR errors on the host of that NVMe device.
It's the DMA fault that caused a NVMe driver timeout.

The correct fix should be that we do proper switching of device DMA
address spaces when system resets, which will setup correct memory
regions and notify the backend of the devices.  This might not affect
much on non-assigned devices since QEMU VT-d emulation will assume a
default passthrough mapping if DMAR is not enabled in the GCMD
register (please refer to vtd_iommu_translate).  However that's required
for an assigned devices, since that'll rebuild the correct GPA to HPA
mapping that is needed for any DMA operation during guest bootstrap.

Besides the system reset, we have some other places that might change
the global DMAR status and we'd better do the same thing there.  For
example, when we change the state of GCMD register, or the DMAR root
pointer.  Do the same refresh for all these places.  For these two
places we'll also need to explicitly invalidate the context entry cache
and iotlb cache.

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1625173
CC: QEMU Stable <qemu-stable@nongnu.org>
Reported-by: Cong Li <coli@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
--
v2:
- do the same for GCMD write, or root pointer update [Alex]
- test is carried out by me this time, by observing the
  vtd_switch_address_space tracepoint after system reboot
v3:
- rewrite commit message as suggested by Alex
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 2cc9ddcceb)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-27 01:08:50 -05:00
Peter Xu 0a818f87f7 intel_iommu: introduce vtd_reset_caches()
Provide the function and use it in vtd_init().  Used to reset both
context entry cache and iotlb cache for the whole IOMMU unit.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 06aba4ca52)
*functional dep. for 2cc9ddcceb
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-27 01:07:19 -05:00
Vladimir Sementsov-Ogievskiy 92c7eec109 nbd/server: fix NBD_CMD_CACHE
We should not go to structured-read branch on CACHE command, fix that.

Bug introduced in bc37b06a5c "nbd/server: introduce NBD_CMD_CACHE"
with the whole feature and affects 3.0.0 release.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
CC: qemu-stable@nongnu.org
Message-Id: <20181003144738.70670-1-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: commit message typo fix]
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 2f454defc2)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-27 01:05:11 -05:00
Peter Maydell 6abeb6d85e target/arm: Correct condition for v8M callee stack push
In v7m_exception_taken() we were incorrectly using a
"LR bit EXCRET.ES is 1" check when it should be 0
(compare the pseudocode ExceptionTaken() function).
This meant we didn't stack the callee-saved registers
when tailchaining from a NonSecure to a Secure exception.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181002145940.30931-1-peter.maydell@linaro.org
(cherry picked from commit 7b73a1ca05)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-27 01:05:11 -05:00
Kevin Wolf 399814e1a1 block-backend: Set werror/rerror defaults in blk_new()
Currently, the default values for werror and rerror have to be set
explicitly with blk_set_on_error() by the callers of blk_new(). The only
caller actually doing this is blockdev_init(), which is called for
BlockBackends created using -drive.

In particular, anonymous BlockBackends created with
-device ...,drive=<node-name> didn't get the correct default set and
instead defaulted to the integer value 0 (= BLOCKDEV_ON_ERROR_REPORT).
This is the intended default for rerror anyway, but the default for
werror should be BLOCKDEV_ON_ERROR_ENOSPC.

Set the defaults in blk_new() instead so that they apply no matter what
way the BlockBackend was created.

Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
(cherry picked from commit cb53460b70)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-27 00:58:34 -05:00
Paolo Bonzini ce2c15fdaf virtio: do not take address of packed members
The address of a packed member is not packed, which may cause accesses
to unaligned pointers.  Avoid this by reading the packed value before
passing it to another function.

Cc: Jason Wang <jasowang@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit d41ca5afe3)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-27 00:57:37 -05:00
Peter Maydell 15f40e2e63 virt: Suppress external aborts on virt-2.10 and earlier
In commit c79c0a314c we enabled emulation of external aborts
when the guest attempts to access a physical address with no
mapped device. In commit 4672cbd7be we suppress this for
most legacy boards to prevent breakage of previously working
guests, but we didn't suppress it in the 'virt' board, with
the rationale "we know that guests won't try to prod devices
that we don't describe in the device tree or ACPI tables". This
is mostly true, but we've had a report of a Linux guest image
that this did break. The problem seems to be that the guest
is (incorrectly) configured with a DEBUG_UART_PHYS value that
tells it there is a uart at 0x10009000 (which is true for
vexpress but not for virt), so in early bootup the kernel
probes this bogus address.

This is a misconfigured guest, so we don't need to worry
about it too much, but we can arrange that guests that ran
on QEMU v2.10 (before c79c0a314c) will still run on
the "virt-2.10" board model, by suppressing external aborts
only for that version and earlier. This seems a reasonable
compromise: "virt-2.10" is supposed to behave the same way
that "virt" did in the 2.10 release, and making it do that
provides a usable workaround for guests with bugs like this.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180925144127.31965-1-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
(cherry picked from commit 846690dee8)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-27 00:56:22 -05:00
Jason Wang 901d84e675 net: ignore packet size greater than INT_MAX
There should not be a reason for passing a packet size greater than
INT_MAX. It's usually a hint of bug somewhere, so ignore packet size
greater than INT_MAX in qemu_deliver_packet_iov()

CC: qemu-stable@nongnu.org
Reported-by: Daniel Shapira <daniel@twistlock.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 1592a99470)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-27 00:53:38 -05:00
Jason Wang 9d9430b75f pcnet: fix possible buffer overflow
In pcnet_receive(), we try to assign size_ to size which converts from
size_t to integer. This will cause troubles when size_ is greater
INT_MAX, this will lead a negative value in size and it can then pass
the check of size < MIN_BUF_SIZE which may lead out of bound access
for both buf and buf1.

Fixing by converting the type of size to size_t.

CC: qemu-stable@nongnu.org
Reported-by: Daniel Shapira <daniel@twistlock.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit b1d80d12c5)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-27 00:53:30 -05:00
Jason Wang b3f1083edb rtl8139: fix possible out of bound access
In rtl8139_do_receive(), we try to assign size_ to size which converts
from size_t to integer. This will cause troubles when size_ is greater
INT_MAX, this will lead a negative value in size and it can then pass
the check of size < MIN_BUF_SIZE which may lead out of bound access of
for both buf and buf1.

Fixing by converting the type of size to size_t.

CC: qemu-stable@nongnu.org
Reported-by: Daniel Shapira <daniel@twistlock.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 1a326646fe)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-27 00:53:20 -05:00
Jason Wang 9971a3fb90 ne2000: fix possible out of bound access in ne2000_receive
In ne2000_receive(), we try to assign size_ to size which converts
from size_t to integer. This will cause troubles when size_ is greater
INT_MAX, this will lead a negative value in size and it can then pass
the check of size < MIN_BUF_SIZE which may lead out of bound access of
for both buf and buf1.

Fixing by converting the type of size to size_t.

CC: qemu-stable@nongnu.org
Reported-by: Daniel Shapira <daniel@twistlock.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit fdc89e90fa)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-27 00:53:12 -05:00
Richard Henderson b05db67c98 target/arm: Fix cpu_get_tb_cpu_state() for non-SVE CPUs
Not only are the sve-related tb_flags fields unused when SVE is
disabled, but not all of the cpu registers are initialized properly
for computing same.  This can corrupt other fields by ORing in -1,
which might result in QEMU crashing.

This bug was not present in 3.0, but this patch is cc'd to
stable because adf92eab90 where the bug was
introduced was marked for stable.

Fixes: adf92eab90
Cc: qemu-stable@nongnu.org (3.0.1)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit e79b445d89)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-27 00:50:46 -05:00
Jeff Cody e9d87aa766 block/rbd: add deprecation documentation for filename keyvalue pairs
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 647f5b5ab7efd8bf567a504c832b1d2d6f719b23.1536704901.git.jcody@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
(cherry picked from commit 3bebd37e04)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-27 00:39:21 -05:00
Jeff Cody 5b2f6925e0 block/rbd: add iotest for rbd legacy keyvalue filename parsing
This is a small test that will check for the ability to parse
both legacy and modern options for rbd.

The way the test is set up is for failure to occur, but without
having to wait to timeout on a non-existent rbd server.  The error
messages in the success path show that the arguments were parsed.

The failure behavior prior to the patch series that has this test, is
qemu-img complaining about mandatory options (e.g. 'pool') not being
provided.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: f830580e339b974a83ed4870d11adcdc17f49a47.1536704901.git.jcody@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
(cherry picked from commit 66e6a735e9)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-27 00:39:12 -05:00
Jeff Cody 0bc2dc7357 block/rbd: Attempt to parse legacy filenames
When we converted rbd to get rid of the older key/value-centric
encoding format, we broke compatibility with image files with backing
file strings encoded in the old format.

This leaves a bit of an ugly conundrum, and a hacky solution.

If the initial attempt to parse the "proper" options fails, it assumes
that we may have an older key/value encoded filename.  Fall back to
attempting to parse the filename, and extract the required options from
it.  If that fails, pass along the original error message.

We do not support mixed modern usage alongside legacy keyvalue pair
usage.

A deprecation warning has been added, although care should be taken
when actually deprecating since the impact is not limited to
commandline or qapi usage, but also opening existing images.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 15b332e5432ad069441f7275a46080f465d789a0.1536704901.git.jcody@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
(cherry picked from commit 084d1d13bd)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-27 00:38:38 -05:00
Jeff Cody 22e766bcf3 block/rbd: pull out qemu_rbd_convert_options
Code movement to pull the conversion from Qdict to BlockdevOptionsRbd
into a helper function.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 5b49a980f2cde6610ab1df41bb0277d00b5db893.1536704901.git.jcody@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
(cherry picked from commit f24b03b56c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-27 00:38:24 -05:00
liujunjie 481be11cba clean up callback when del virtqueue
Before, we did not clear callback like handle_output when delete
the virtqueue which may result be segmentfault.
The scene is as follows:
1. Start a vm with multiqueue vhost-net,
2. then we write VIRTIO_PCI_GUEST_FEATURES in PCI configuration to
triger multiqueue disable in this vm which will delete the virtqueue.
In this step, the tx_bh is deleted but the callback virtio_net_handle_tx_bh
still exist.
3. Finally, we write VIRTIO_PCI_QUEUE_NOTIFY in PCI configuration to
notify the deleted virtqueue. In this way, virtio_net_handle_tx_bh
will be called and qemu will be crashed.

Although the way described above is uncommon, we had better reinforce it.

CC: qemu-stable@nongnu.org
Signed-off-by: liujunjie <liujunjie23@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 7da2d99fb9)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-27 00:37:20 -05:00
Vladimir Sementsov-Ogievskiy a8b436c88d nbd/server: fix bitmap export
bitmap_to_extents function is broken: it switches dirty variable after
every iteration, however it can process only part of dirty (or zero)
area during one iteration in case when this area is too large for one
extent.

Fortunately, the bug doesn't produce wrong extent flags: it just inserts
a zero-length extent between sequential extents representing large dirty
(or zero) area. However, zero-length extents are forbidden by the NBD
protocol. So, a careful client should consider such a reply as a server
fault, while a less-careful will likely ignore zero-length extents.

The bug can only be triggered by a client that requests block status
for nearly 4G at once (a request of 4G and larger is impossible per
the protocol, and requests smaller than 4G less the bitmap granularity
cause the loop to quit iterating rather than revisit the tail of the
large area); it also cannot trigger if the client used the
NBD_CMD_FLAG_REQ_ONE flag.  Since qemu 3.0 as client (using the
x-dirty-bitmap extension) always passes the flag, it is immune; and
we are not aware of other open-source clients that know how to request
qemu:dirty-bitmap:FOO contexts.  Clients that want to avoid the bug
could cap block status requests to a smaller length, such as 2G or 3G.

Fix this by more careful handling of dirty variable.

Bug was introduced in 3d068aff16
 "nbd/server: implement dirty bitmap export", with the whole function.
and is present in v3.0.0 release.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180914165116.23182-1-vsementsov@virtuozzo.com>
CC: qemu-stable@nongnu.org
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: improved commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 6545916d52)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-27 00:36:26 -05:00
Max Filippov ccdd67c8d9 target/xtensa: fix s32c1i TCGMemOp flags
s32c1i must load and store value with target endianness, not host.
This results in an infinite loop in atomic cmpxchg sequences when target
endianness doesn't match host endianness.

Fixes: 9fb40342d4 ("target/xtensa: support MTTCG")
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 7a54cfbcee)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-27 00:31:53 -05:00
Fam Zheng ef6de9e720 job: Fix nested aio_poll() hanging in job_txn_apply
All callers have acquired ctx already. Doing that again results in
aio_poll() hang. This fixes the problem that a BDRV_POLL_WHILE() in the
callback cannot make progress because ctx is recursively locked, for
example, when drive-backup finishes.

There are two callers of job_finalize():

    fam@lemon:~/work/qemu [master]$ git grep -w -A1 '^\s*job_finalize'
    blockdev.c:    job_finalize(&job->job, errp);
    blockdev.c-    aio_context_release(aio_context);
    --
    job-qmp.c:    job_finalize(job, errp);
    job-qmp.c-    aio_context_release(aio_context);
    --
    tests/test-blockjob.c:    job_finalize(&job->job, &error_abort);
    tests/test-blockjob.c-    assert(job->job.status == JOB_STATUS_CONCLUDED);

Ignoring the test, it's easy to see both callers to job_finalize (and
job_do_finalize) have acquired the context.

Cc: qemu-stable@nongnu.org
Reported-by: Gu Nini <ngu@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 49880165a4)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-27 00:29:12 -05:00
Alberto Garcia 9e25063bb0 block: Fix use after free error in bdrv_open_inherit()
When a block device is opened with BDRV_O_SNAPSHOT and the
bdrv_append_temp_snapshot() call fails then the error code path tries
to unref the already destroyed 'options' QDict.

This can be reproduced easily by setting TMPDIR to a location where
the QEMU process can't write:

   $ TMPDIR=/nonexistent $QEMU -drive driver=null-co,snapshot=on

Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 8961be33e8)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-27 00:28:49 -05:00
Michael S. Tsirkin 84cabd6c6c tests: update acpi expected files
Fixes: dbb6da8ba7 ("pc: acpi: revert back to 1 SRAT entry for hotpluggable area")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit d2a1b1d602)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-27 00:28:07 -05:00
Igor Mammedov f8d4616e62 pc: acpi: revert back to 1 SRAT entry for hotpluggable area
Commit
  10efd7e108 "pc: acpi: fix memory hotplug regression by reducing stub SRAT entry size"
attemped to fix hotplug regression introduced by
  848a1cc1e "hw/acpi-build: build SRAT memory affinity structures for DIMM devices"

fixed issue for Windows/3.0+ linux kernels, however it regressed 2.6 based
kernels (RHEL6) to the point where guest might crash at boot.
Reason is that 2.6 kernel discards SRAT table due too small last entry
which down the road leads to crashes. Hack I've tried in 10efd7e108 is also
not ACPI spec compliant according to which whole possible RAM should be
described in SRAT. Revert 10efd7e108 to fix regression for 2.6 based kernels.

With 10efd7e108 reverted, I've also tried splitting SRAT table statically
in different ways %/node and %/slot but Windows still fails to online
2nd pc-dimm hot-plugged into node 0 (as described in 10efd7e108) and
sometimes even coldplugged pc-dimms where affected with static SRAT
partitioning.
The only known so far way where Windows stays happy is when we have 1
SRAT entry in the last node covering all hotplug area.

Revert 848a1cc1e until we come up with a way to avoid regression
on Windows with hotplug area split in several entries.
Tested this with 2.6/3.0 based kernels (RHEL6/7) and WS20[08/12/12R2/16]).

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit dbb6da8ba7)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-27 00:27:56 -05:00
Yury Kotov bda7545118 vhost: fix invalid downcast
virtio_queue_get_desc_addr returns 64-bit hwaddr while int is usually 32-bit.
If returned hwaddr is not equal to 0 but least-significant 32 bits are
equal to 0 then this code will not actually stop running queue.

Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Acked-by: Jia He <hejianet@gmail.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit fa4ae4be15)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-21 15:49:14 -05:00
Fam Zheng 70b8acfa0d slirp: Add sanity check for str option length
When user provides a long domainname or hostname that doesn't fit in the
DHCP packet, we mustn't overflow the response packet buffer. Instead,
report errors, following the g_warning() in the slirp->vdnssearch
branch.

Also check the strlen against 256 when initializing slirp, which limit
is also from the protocol where one byte represents the string length.
This gives an early error before the warning which is harder to notice
or diagnose.

Reported-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
(cherry picked from commit 6e157a0339)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-21 15:47:26 -05:00
Prasad Singamsetty 2f5c767a82 kvm: add call to qemu_add_opts() for -overcommit option
qemu command fails to process -overcommit option. Add the missing
call to qemu_add_opts() in vl.c.

Signed-off-by: Prasad Singamsetty <prasad.singamsetty@oracle.com>
Message-Id: <20180815175704.105902-1-prasad.singamsetty@oracle.com>
Reviewed-by: Mark Kanda <mark.kanda@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 1fdd474871)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-21 15:46:48 -05:00
Max Filippov 32a51d0704 target/xtensa: fix FPU2000 bugs
- FPU2000 defines rfr and wfr opcodes, not rfr.s and wfr.s;
- movcond.s uses incorrect operand in tcg_gen_movcond: in case the
  condition is not satisfied it must not change its argument 0.

Fixes: c04e1692e3 ("target/xtensa: extract FPU2000 opcode
translators")
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
(cherry picked from commit e8e05fd472)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-21 15:46:17 -05:00
Paolo Bonzini a40e71884d virtio: update MemoryRegionCaches when guest negotiates features
Because the cache is sized to include the rings and the event indices,
negotiating the VIRTIO_RING_F_EVENT_IDX feature will result in the size
of the cache changing.  And because MemoryRegionCache accesses are
range-checked, if we skip this we end up with an assertion failure.
This happens with OpenBSD 6.3.

Reported-by: Fam Zheng <famz@redhat.com>
Fixes: 97cd965c07
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit db812c4073)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-21 15:45:33 -05:00
Jeff Cody 457b0e4761 block: iotest to catch abort on forced blockjob cancel
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: df317f617fbe5affcf699cb8560e7b0c2e028a64.1534868459.git.jcody@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
(cherry picked from commit 26bf474ba9)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-21 15:44:18 -05:00
Jeff Cody def983b923 block: for jobs, do not clear user_paused until after the resume
The function job_cancel_async() will always cause an assert for blockjob
user resume.  We set job->user_paused to false, and then call
job->driver->user_resume().  In the case of blockjobs, this is the
block_job_user_resume() function.

In that function, we assert that job.user_paused is set to true.
Unfortunately, right before calling this function, it has explicitly
been set to false.

The fix is pretty simple: set job->user_paused to false only after the
job user_resume() function has been called.

Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: bb183b77d8f2dd6bd67b8da559a90ac1e74b2052.1534868459.git.jcody@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
(cherry picked from commit e321c0597c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-21 15:44:09 -05:00
Eduardo Habkost 3dceceec72 i386: Disable TOPOEXT by default on "-cpu host"
Enabling TOPOEXT is always allowed, but it can't be enabled
blindly by "-cpu host" because it may make guests crash if the
rest of the cache topology information isn't provided or isn't
consistent.

This addresses the bug reported at:
https://bugzilla.redhat.com/show_bug.cgi?id=1613277

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180809221852.15285-1-ehabkost@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
(cherry picked from commit 7210a02c58)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-21 15:43:11 -05:00
Peter Wu 9431827af9 vnc: fix memleak of the "vnc-worker-output" name
Fixes repeated memory leaks of 18 bytes when using VNC:

    Direct leak of 831024 byte(s) in 46168 object(s) allocated from:
        ...
        #4 0x7f6d2f919bdd in g_strdup_vprintf glib/gstrfuncs.c:514
        #5 0x56085cdcf660 in buffer_init util/buffer.c:59
        #6 0x56085ca6a7ec in vnc_async_encoding_start ui/vnc-jobs.c:177
        #7 0x56085ca6b815 in vnc_worker_thread_loop ui/vnc-jobs.c:240

Fixes: 543b95801f ("vnc: attach names to buffers")
Cc: Gerd Hoffmann <kraxel@redhat.com>
CC: qemu-stable@nongnu.org
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180807221830.3844-1-peter@lekensteyn.nl
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 0ae0b069aa)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-21 15:42:17 -05:00
Marc-André Lureau d1c384fabc monitor: fix oob command leak
Spotted by ASAN, during make check...

Direct leak of 40 byte(s) in 1 object(s) allocated from:
    #0 0x7f8e27262c48 in malloc (/lib64/libasan.so.5+0xeec48)
    #1 0x7f8e26a5f3c5 in g_malloc (/lib64/libglib-2.0.so.0+0x523c5)
    #2 0x555ab67078a8 in qstring_from_str /home/elmarco/src/qq/qobject/qstring.c:67
    #3 0x555ab67071e4 in qstring_new /home/elmarco/src/qq/qobject/qstring.c:24
    #4 0x555ab6713fbf in qstring_from_escaped_str /home/elmarco/src/qq/qobject/json-parser.c:144
    #5 0x555ab671738c in parse_literal /home/elmarco/src/qq/qobject/json-parser.c:506
    #6 0x555ab67179c3 in parse_value /home/elmarco/src/qq/qobject/json-parser.c:569
    #7 0x555ab6715123 in parse_pair /home/elmarco/src/qq/qobject/json-parser.c:306
    #8 0x555ab6715483 in parse_object /home/elmarco/src/qq/qobject/json-parser.c:357
    #9 0x555ab671798b in parse_value /home/elmarco/src/qq/qobject/json-parser.c:561
    #10 0x555ab6717a6b in json_parser_parse_err /home/elmarco/src/qq/qobject/json-parser.c:592
    #11 0x555ab4fd4dcf in handle_qmp_command /home/elmarco/src/qq/monitor.c:4257
    #12 0x555ab6712c4d in json_message_process_token /home/elmarco/src/qq/qobject/json-streamer.c:105
    #13 0x555ab67e01e2 in json_lexer_feed_char /home/elmarco/src/qq/qobject/json-lexer.c:323
    #14 0x555ab67e0af6 in json_lexer_feed /home/elmarco/src/qq/qobject/json-lexer.c:373
    #15 0x555ab6713010 in json_message_parser_feed /home/elmarco/src/qq/qobject/json-streamer.c:124
    #16 0x555ab4fd58ec in monitor_qmp_read /home/elmarco/src/qq/monitor.c:4337
    #17 0x555ab6559df2 in qemu_chr_be_write_impl /home/elmarco/src/qq/chardev/char.c:175
    #18 0x555ab6559e95 in qemu_chr_be_write /home/elmarco/src/qq/chardev/char.c:187
    #19 0x555ab6560127 in fd_chr_read /home/elmarco/src/qq/chardev/char-fd.c:66
    #20 0x555ab65d9c73 in qio_channel_fd_source_dispatch /home/elmarco/src/qq/io/channel-watch.c:84
    #21 0x7f8e26a598ac in g_main_context_dispatch (/lib64/libglib-2.0.so.0+0x4c8ac)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180809114417.28718-4-marcandre.lureau@redhat.com>
[Screwed up in commit b27314567d]
Cc: qemu-stable@nongnu.org
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
(cherry picked from commit cb9ec42f33)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-18 21:41:22 -05:00
Fam Zheng 8f0e1478d0 aio: Do aio_notify_accept only during blocking aio_poll
An aio_notify() pairs with an aio_notify_accept(). The former should
happen in the main thread or a vCPU thread, and the latter should be
done in the IOThread.

There is one rare case that the main thread or vCPU thread may "steal"
the aio_notify() event just raised by itself, in bdrv_set_aio_context()
[1]. The sequence is like this:

    main thread                     IO Thread
    ===============================================================
    bdrv_drained_begin()
      aio_disable_external(ctx)
                                    aio_poll(ctx, true)
                                      ctx->notify_me += 2
    ...
    bdrv_drained_end()
      ...
        aio_notify()
    ...
    bdrv_set_aio_context()
      aio_poll(ctx, false)
[1]     aio_notify_accept(ctx)
                                      ppoll() /* Hang! */

[1] is problematic. It will clear the ctx->notifier event so that
the blocked ppoll() will not return.

(For the curious, this bug was noticed when booting a number of VMs
simultaneously in RHV.  One or two of the VMs will hit this race
condition, making the VIRTIO device unresponsive to I/O commands. When
it hangs, Seabios is busy waiting for a read request to complete (read
MBR), right after initializing the virtio-blk-pci device, using 100%
guest CPU. See also https://bugzilla.redhat.com/show_bug.cgi?id=1562750
for the original bug analysis.)

aio_notify() only injects an event when ctx->notify_me is set,
correspondingly aio_notify_accept() is only useful when ctx->notify_me
_was_ set. Move the call to it into the "blocking" branch. This will
effectively skip [1] and fix the hang.

Furthermore, blocking aio_poll is only allowed on home thread
(in_aio_context_home_thread), because otherwise two blocking
aio_poll()'s can steal each other's ctx->notifier event and cause
hanging just like described above.

Cc: qemu-stable@nongnu.org
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20180809132259.18402-3-famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
(cherry picked from commit b37548fcd1)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-18 21:40:40 -05:00
Fam Zheng 98f6f21261 aio-posix: Don't count ctx->notifier as progress when polling
The same logic exists in fd polling. This change is especially important
to avoid busy loop once we limit aio_notify_accept() to blocking
aio_poll().

Cc: qemu-stable@nongnu.org
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20180809132259.18402-2-famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
(cherry picked from commit 70232b5253)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-18 21:40:26 -05:00
Fam Zheng ac141891ee nvme: Fix nvme_init error handling
It is wrong to leave this field as 1, as nvme_close() called in the
error handling code in nvme_file_open() will use it and try to free
s->queues again.

Another problem is the cleaning ups are duplicated between the fail*
labels of nvme_init() and nvme_file_open(), which calls nvme_close().

A third problem is nvme_close() misses g_free() and
event_notifier_cleanup().

Fix all of them.

Cc: qemu-stable@nongnu.org
Signed-off-by: Fam Zheng <famz@redhat.com>

Message-Id: <20180712025420.4932-1-famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
(cherry picked from commit 9582f357bb)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-18 21:40:15 -05:00
Daniel P. Berrangé 4b4201206c qemu-img: fix regression copying secrets during convert
When the convert command is creating an output file that needs
secrets, we need to ensure those secrets are passed to both the
blk_new_open and bdrv_create API calls.

This is done by qemu-img extracting all opts matching the name
suffix "key-secret". Unfortunately the code doing this was run after the
call to bdrv_create(), which meant the QemuOpts it was extracting
secrets from was now empty.

Previously this worked by luks as a bug meant the "key-secret"
parameters were not purged from the QemuOpts. This bug was fixed in

  commit b76b4f6045
  Author: Kevin Wolf <kwolf@redhat.com>
  Date:   Thu Jan 11 16:18:08 2018 +0100

    qcow2: Use visitor for options in qcow2_create()

Exposing the latent bug in qemu-img. This fix simply moves the copying
of secrets to before the bdrv_create() call.

Cc: qemu-stable@nongnu.org
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 8d65a3ccfd)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-18 21:39:20 -05:00
Kevin Wolf 1662d4d490 mirror: Fail gracefully for source == target
blockdev-mirror with the same node for source and target segfaults
today: A node is in its own backing chain, so mirror_start_job() decides
that this is an active commit. When adding the intermediate nodes with
block_job_add_bdrv(), it starts the iteration through the subchain with
the backing file of source, though, so it never reaches target and
instead runs into NULL at the base.

While we could fix that by starting with source itself, there is no
point in allowing mirroring a node into itself and I wouldn't be
surprised if this caused more problems later.

So just check for this scenario and error out.

Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 86fae10c64)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-18 21:38:54 -05:00
Kevin Wolf c89985bad9 block/qapi: Fix memory leak in qmp_query_blockstats()
For BlockBackends that are skipped in query-blockstats, we would leak
info since commit 567dcb31. Allocate info only later to avoid the memory
leak.

Fixes: CID 1394727
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
(cherry picked from commit f62492bb8d)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-18 21:36:39 -05:00
Richard Henderson fb661dac05 target/arm: Use FZ not FZ16 for SVE FCVT single-half and double-half
We were using the wrong flush-to-zero bit for the non-half input.

Fixes: 46d33d1e3c
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180810193129.1556-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit e4ab5124a5)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-18 21:23:27 -05:00
Richard Henderson aff596dcf4 target/arm: Use fp_status_fp16 for do_fmpa_zpzzz_h
This makes float16_muladd correctly use FZ16 not FZ.

Fixes: 6ceabaad11
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180810193129.1556-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 52a339b11d)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-18 21:21:13 -05:00
Richard Henderson a606615e2f target/arm: Ignore float_flag_input_denormal from fp_status_f16
When FZ is set, input_denormal exceptions are recognized, but this does
not happen with FZ16.  The softfloat code has no way to distinguish
these bits and will raise such exceptions into fp_status_f16.flags,
so ignore them when computing the accumulated flags.

Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180810193129.1556-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 19062c169e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-18 21:18:43 -05:00
Richard Henderson fbec38531c target/arm: Adjust FPCR_MASK for FZ16
When support for FZ16 was added, we failed to include the bit
within FPCR_MASK, which means that it could never be set.
Continue to zero FZ16 when ARMv8.2-FP16 is not enabled.

Fixes: d81ce0ef2c
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180810193129.1556-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 0b62159be3)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-18 21:18:31 -05:00
Bharata B Rao b7f525bf89 spapr_cpu_core: vmstate_[un]register per-CPU data from (un)realizefn
VMStateDescription vmstate_spapr_cpu_state was added by commit
b94020268e (spapr_cpu_core: migrate per-CPU data) to migrate per-CPU
data with the required vmstate registration and unregistration calls.
However the unregistration is being done only from vcpu creation error path
and not from CPU delete path.

This causes migration to fail with the following error if migration is
attempted after a CPU unplug like this:
Unknown savevm section or instance 'spapr_cpu' 16
Additionally this leaves the source VM unresponsive after migration failure.

Fix this by ensuring the vmstate_unregister happens during CPU removal.
Fixing this becomes easier when vmstate (un)registration calls are moved to
vcpu (un)realize functions which is what this patch does.

Fixes: https://bugs.launchpad.net/qemu/+bug/1785972
Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
(cherry picked from commit cc71c7760e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-18 21:04:30 -05:00
Richard Henderson 5a49083b1e target/arm: Add sve-max-vq cpu property to -cpu max
This allows the default (and maximum) vector length to be set
from the command-line.  Which is extraordinarily helpful in
debugging problems depending on vector length without having to
bake knowledge of PR_SET_SVE_VL into every guest binary.

Cc: qemu-stable@nongnu.org (3.0.1)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit adf92eab90)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-18 21:03:48 -05:00
Richard Henderson 192686a800 target/arm: Dump SVE state if enabled
Also fold the FPCR/FPSR state onto the same line as PSTATE,
and mention but do not dump disabled FPU state.

Cc: qemu-stable@nongnu.org (3.0.1)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 2bf5f3f91b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-18 21:03:33 -05:00
Richard Henderson 965307a713 target/arm: Reformat integer register dump
With PC, there are 33 registers.  Three per line lines up nicely
without overflowing 80 columns.

Cc: qemu-stable@nongnu.org (3.0.1)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 3cb506a399)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-18 21:03:20 -05:00
Richard Henderson 3d95093fa7 target/arm: Fix offset scaling for LD_zprr and ST_zprr
The scaling should be solely on the memory operation size; the number
of registers being loaded does not come in to the initial computation.

Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 50ef1cbf31)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-18 21:03:10 -05:00
Richard Henderson e97358cae4 target/arm: Fix offset for LD1R instructions
The immediate should be scaled by the size of the memory reference,
not the size of the elements into which it is loaded.

Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit d0e372b029)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-18 21:02:54 -05:00
Richard Henderson ca276173c9 target/arm: Fix sign-extension in sve do_ldr/do_str
The expression (int) imm + (uint32_t) len_align turns into uint32_t
and thus with negative imm produces a memory operation at the wrong
offset.  None of the numbers involved are particularly large, so
change everything to use int.

Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 19f2acc915)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-18 21:02:34 -05:00
Richard Henderson 471b5ae011 target/arm: Fix typo in helper_sve_ld1hss_r
Cc: qemu-stable@nongnu.org (3.0.1)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 573ec0fe40)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-18 21:02:18 -05:00
Richard Henderson d1d2721876 target/arm: Fix typo in helper_sve_movz_d
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180801123111.3595-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 054e7adf4e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-18 21:00:56 -05:00
Richard Henderson bfc23fb2f0 target/arm: Reorganize SVE WHILE
The pseudocode for this operation is an increment + compare loop,
so comparing <= the maximum integer produces an all-true predicate.

Rather than bound in both the inline code and the helper, pass the
helper the number of predicate bits to set instead of the number
of predicate elements to set.

Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180801123111.3595-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit bbd0968c45)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-18 21:00:32 -05:00
Richard Henderson f7ddde210a target/arm: Fix typo in do_sat_addsub_64
Used the wrong temporary in the computation of subtractive overflow.

Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180801123111.3595-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 7a31e0c6c6)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-18 21:00:13 -05:00
Richard Henderson 58c4b085ee target/arm: Fix sign of sve_cmpeq_ppzw/sve_cmpne_ppzw
The normal vector element is sign-extended before
comparing with the wide vector element.

Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180801123111.3595-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit df4e001093)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-18 20:59:56 -05:00
Peter Maydell 38441756b7 Update version for v3.0.0 release
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14 16:38:43 +01:00
Peter Maydell 6ad9080538 Update version for v3.0.0-rc4 release
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-07 17:26:17 +01:00
Marc-André Lureau 93f874fe9d virtio-gpu: fix crashes upon warm reboot with vga mode
With vga=775 on the Linux command line a first boot of the VM running
Linux works fine. After a warm reboot it crashes during Linux boot.

Before that, valgrind points out bad memory write to console
surface. The VGA code is not aware that virtio-gpu got a message
surface scanout when the display is disabled. Let's reset VGA graphic
mode when it is the case, so that a new display surface is created
when doing further VGA operations.

https://bugs.launchpad.net/qemu/+bug/1784900/

Reported-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Message-id: 20180803153235.4134-1-marcandre.lureau@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-07 15:03:58 +01:00
Peter Maydell 09b94ac0f2 slirp: Correct size check in m_inc()
The data in an mbuf buffer is not necessarily at the start of the
allocated buffer. (For instance m_adj() allows data to be trimmed
from the start by just advancing the pointer and reducing the length.)
This means that the allocated buffer size (m->m_size) and the
amount of space from the m_data pointer to the end of the
buffer (M_ROOM(m)) are not necessarily the same.

Commit 864036e251 tried to change the m_inc() function from
taking the new allocated-buffer-size to taking the new room-size,
but forgot to change the initial "do we already have enough space"
check. This meant that if we were trying to extend a buffer which
had a leading gap between the buffer start and the data, we might
incorrectly decide it didn't need to be extended, and then
overrun the end of the buffer, causing memory corruption and
an eventual crash.

Change the "already big enough?" condition from checking the
argument against m->m_size to checking against M_ROOM().
This only makes a difference for the callsite in m_cat();
the other three callsites all start with a freshly allocated
mbuf from m_get(), which will have m->m_size == M_ROOM(m).

Fixes: 864036e251
Fixes: https://bugs.launchpad.net/qemu/+bug/1785670
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20180807114501.12370-1-peter.maydell@linaro.org
Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-08-07 14:13:22 +01:00
Thomas Huth 09d98b6980 target/xtensa/cpu: Set owner of memory region in xtensa_cpu_initfn
The instance_init function of the xtensa CPUs creates a memory region,
but does not set an owner, so the memory region is not destroyed
correctly when the CPU object is removed. This can happen when
introspecting the CPU devices, so introspecting the CPU device will
leave a dangling memory region object in the QOM tree. Make sure to
set the right owner here to fix this issue.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Message-id: 1532005320-17794-1-git-send-email-thuth@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-06 19:07:21 +01:00
Peter Maydell 341823c172 hw/intc/arm_gicv3_common: Move gicd shift bug handling to gicv3_post_load
The code currently in gicv3_gicd_no_migration_shift_bug_post_load()
that handles migration from older QEMU versions with a particular
bug is misplaced. We need to run this after migration in all cases,
not just the cases where the "arm_gicv3/gicd_no_migration_shift_bug"
subsection is present, so it must go in a post_load hook for the
top level VMSD, not for the subsection. Move it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20180806123445.1459-6-peter.maydell@linaro.org
2018-08-06 16:19:33 +01:00
Peter Maydell 326049cc8e hw/intc/arm_gicv3_common: Move post_load hooks to top-level VMSD
Contrary to the the impression given in docs/devel/migration.rst,
the migration code does not run the pre_load hook for a
subsection unless the subsection appears on the wire, and so
this is not a place where you can set the default value for
state for the "subsection not present" case. Instead this needs
to be done in a pre_load hook for whatever is the parent VMSD
of the subsection.

We got this wrong in two of the subsection definitions in
the GICv3 migration structs; fix this.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20180806123445.1459-5-peter.maydell@linaro.org
2018-08-06 16:19:33 +01:00
Peter Maydell 7b69454a12 target/arm: Add dummy needed functions to M profile vmstate subsections
Currently the migration code incorrectly treats a subsection with
no .needed function pointer as if it was the subsection list
terminator -- it is ignored and so is everything after it.
Work around this by giving various M profile vmstate structs
a 'needed' function that always returns true.
We reuse m_needed() for this, since it's always true here.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180806123445.1459-4-peter.maydell@linaro.org
2018-08-06 16:19:33 +01:00
Peter Maydell adc4fda6d5 hw/intc/arm_gicv3_common: Combine duplicate .subsections in vmstate_gicv3_cpu
Commit 6692aac411 accidentally introduced a second initialization
of the .subsections field of vmstate_gicv3_cpu, instead of adding
the new subsection to the existing list. The effect of this was
probably that migration of GICv3 with virtualization enabled was
broken (or alternatively that migration of ICC_SRE_EL1 was broken,
depending on which of the two initializers the compiler used).
Combine the two into a single list.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180806123445.1459-3-peter.maydell@linaro.org
2018-08-06 16:19:33 +01:00
Peter Maydell 78e9ddd75e hw/intc/arm_gicv3_common: Give no-migration-shift-bug subsection a needed function
Currently the migration code incorrectly treats a subsection with
no .needed function pointer as if it was the subsection list
terminator -- it is ignored and so is everything after it.
Work around this by giving vmstate_gicv3_gicd_no_migration_shift_bug
a 'needed' function that always returns true.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180806123445.1459-2-peter.maydell@linaro.org
2018-08-06 16:19:33 +01:00
Richard Henderson 1fb57da72a tcg/optimize: Do not skip default processing of dup_vec
If we do not opimize away dup_vec, we must mark its output as changed.

Fixes: 170ba88f45
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180805233258.31892-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-06 14:57:48 +01:00
Peter Maydell 896b63dbff Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.0-20180801' into staging
ppc patch queue for 2018-08-01

Here are a final couple of fixes for the 3.0 release.

# gpg: Signature made Wed 01 Aug 2018 04:52:57 BST
# gpg:                using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-3.0-20180801:
  sam460ex: Fix PCI interrupts with multiple devices
  hw/misc/macio: Fix device introspection problems in macio devices

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-06 10:48:06 +01:00
Peter Maydell e3a4129abd Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, virtio: fixes

A couple of last minute fixes.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri 03 Aug 2018 09:35:54 BST
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  tests/acpi: update tables after memory hotplug changes
  pc: acpi: fix memory hotplug regression by reducing stub SRAT entry size
  tests/acpi-test: update ACPI tables test blobs
  hw/acpi-build: Add a check for memory-less NUMA nodes
  vhost: check region type before casting

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-06 09:59:05 +01:00
Michael S. Tsirkin 1c707d6990 tests/acpi: update tables after memory hotplug changes
Previous patch changes acpi tables, update expected
files accordingly.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-03 11:35:21 +03:00
Igor Mammedov 10efd7e108 pc: acpi: fix memory hotplug regression by reducing stub SRAT entry size
Commit 848a1cc1e (hw/acpi-build: build SRAT memory affinity structures for DIMM devices)
broke the first dimm hotplug in following cases:

 1: there is no coldplugged dimm in the last numa node
    but there is a coldplugged dimm in another node

  -m 4096,slots=4,maxmem=32G               \
  -object memory-backend-ram,id=m0,size=2G \
  -device pc-dimm,memdev=m0,node=0         \
  -numa node,nodeid=0                      \
  -numa node,nodeid=1

 2: if order of dimms on CLI is:
       1st plugged dimm in node1
       2nd plugged dimm in node0

  -m 4096,slots=4,maxmem=32G               \
  -object memory-backend-ram,size=2G,id=m0 \
  -device pc-dimm,memdev=m0,node=1         \
  -object memory-backend-ram,id=m1,size=2G \
  -device pc-dimm,memdev=m1,node=0         \
  -numa node,nodeid=0                      \
  -numa node,nodeid=1

(qemu) object_add memory-backend-ram,id=m2,size=1G
(qemu) device_add pc-dimm,memdev=m2,node=0

the first DIMM hotplug to any node except the last one
fails (Windows is unable to online it).

Length reduction of stub hotplug memory SRAT entry,
fixes issue for some reason.

RHBZ: 1609234

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-03 11:35:21 +03:00
Dou Liyang 16e2841d20 tests/acpi-test: update ACPI tables test blobs
Now, QEmu adds a new check for memory-less NUMA nodes in build_srat().

It effects the ACPI test.

So, Update ACPI tables test blobs.

Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-03 11:35:21 +03:00
Dou Liyang 16b4226363 hw/acpi-build: Add a check for memory-less NUMA nodes
Currently, Qemu ACPI builder doesn't consider the memory-less NUMA nodes, eg:

  -m 4G,slots=4,maxmem=8G \
  -numa node,nodeid=0 \
  -numa node,nodeid=1,mem=2G \
  -numa node,nodeid=2,mem=2G \
  -numa node,nodeid=3\

Guest Linux will report

  [    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0xffffffffffffffff]
  [    0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x00000000-0x0009ffff]
  [    0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x00100000-0x7fffffff]
  [    0.000000] ACPI: SRAT: Node 2 PXM 2 [mem 0x80000000-0xbfffffff]
  [    0.000000] ACPI: SRAT: Node 2 PXM 2 [mem 0x100000000-0x13fffffff]
  [    0.000000] ACPI: SRAT: Node 3 PXM 3 [mem 0x140000000-0x13fffffff]
  [    0.000000] ACPI: SRAT: Node 3 PXM 3 [mem 0x140000000-0x33fffffff] hotplug

[mem 0x00000000-0xffffffffffffffff] and [mem 0x140000000-0x13fffffff] are bogus.

Add a check to avoid building srat memory for memory-less NUMA nodes, also update
the test file. Now the info in guest linux will be

  [    0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x00000000-0x0009ffff]
  [    0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x00100000-0x7fffffff]
  [    0.000000] ACPI: SRAT: Node 2 PXM 2 [mem 0x80000000-0xbfffffff]
  [    0.000000] ACPI: SRAT: Node 2 PXM 2 [mem 0x100000000-0x13fffffff]
  [    0.000000] ACPI: SRAT: Node 3 PXM 3 [mem 0x140000000-0x33fffffff] hotplug

Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-03 11:35:21 +03:00
Tiwei Bie 388a86df9c vhost: check region type before casting
Check region type first before casting the memory region
to IOMMUMemoryRegion. Otherwise QEMU will abort with below
error message when casting non-IOMMU memory region:

vhost_iommu_region_add: Object 0x561f28bce4f0 is not an
instance of type qemu:iommu-memory-region

Fixes: cb1efcf462 ("iommu: Add IOMMU index argument to notifier APIs")
Cc: Peter Maydell <peter.maydell@linaro.org>

Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-03 11:35:21 +03:00
BALATON Zoltan 6484ab3dff sam460ex: Fix PCI interrupts with multiple devices
The four interrupts of the PCI bus are connected to the same UIC pin
on the real Sam460ex. Evidence for this can be found in the UBoot
source for the Sam460ex in the Sam460ex.c file where
PCI_INTERRUPT_LINE is written. Change the ppc440_pcix model to behave
more like this.

This fixes the problem that can be observed when adding further PCI
cards that got their interrupt rotated to other interrupts than PCI
INT A. In particular, the bug was observed with an additional OHCI PCI
card or an ES1370 sound device.

Signed-off-by: Sebastian Bauer <mail@sebastianbauer.info>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Sebastian Bauer <mail@sebastianbauer.info>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-01 11:01:38 +10:00
Thomas Huth 1069a3c6e1 hw/misc/macio: Fix device introspection problems in macio devices
Valgrind reports an error when introspecting the macio devices, e.g.:

echo "{'execute':'qmp_capabilities'} {'execute':'device-list-properties'," \
 "'arguments':{'typename':'macio-newworld'}}" \
 "{'execute': 'human-monitor-command', " \
 "'arguments': {'command-line': 'info qtree'}}" | \
 valgrind -q ppc64-softmmu/qemu-system-ppc64 -M none,accel=qtest -qmp stdio
[...]
==30768== Invalid read of size 8
==30768==    at 0x5BC1EA: qdev_print (qdev-monitor.c:686)
==30768==    by 0x5BC1EA: qbus_print (qdev-monitor.c:719)
==30768==    by 0x43E458: handle_hmp_command (monitor.c:3446)
[...]

Use the new function sysbus_init_child_obj() to initialize the objects
here, to get the reference counting of the objects right, so that they
are cleaned up correctly when the parent gets removed.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-01 09:48:40 +10:00
Peter Maydell f750236039 Update version for v3.0.0-rc3 release
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-31 19:30:17 +01:00
Peter Maydell b890416474 Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2018-07-31' into staging
Monitor patches for 2018-07-31 (3.0.0-rc3)

# gpg: Signature made Tue 31 Jul 2018 16:46:16 BST
# gpg:                using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-monitor-2018-07-31:
  monitor: temporary fix for dead-lock on event recursion

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-31 18:02:11 +01:00
Marc-André Lureau 9a1054061c monitor: temporary fix for dead-lock on event recursion
With a Spice port chardev, it is possible to reenter
monitor_qapi_event_queue() (when the client disconnects for
example). This will dead-lock on monitor_lock.

Instead, use some TLS variables to check for recursion and queue the
events.

Fixes:
 (gdb) bt
 #0  0x00007fa69e7217fd in __lll_lock_wait () at /lib64/libpthread.so.0
 #1  0x00007fa69e71acf4 in pthread_mutex_lock () at /lib64/libpthread.so.0
 #2  0x0000563303567619 in qemu_mutex_lock_impl (mutex=0x563303d3e220 <monitor_lock>, file=0x5633036589a8 "/home/elmarco/src/qq/monitor.c", line=645) at /home/elmarco/src/qq/util/qemu-thread-posix.c:66
 #3  0x0000563302fa6c25 in monitor_qapi_event_queue (event=QAPI_EVENT_SPICE_DISCONNECTED, qdict=0x56330602bde0, errp=0x7ffc6ab5e728) at /home/elmarco/src/qq/monitor.c:645
 #4  0x0000563303549aca in qapi_event_send_spice_disconnected (server=0x563305afd630, client=0x563305745360, errp=0x563303d8d0f0 <error_abort>) at qapi/qapi-events-ui.c:149
 #5  0x00005633033e600f in channel_event (event=3, info=0x5633061b0050) at /home/elmarco/src/qq/ui/spice-core.c:235
 #6  0x00007fa69f6c86bb in reds_handle_channel_event (reds=<optimized out>, event=3, info=0x5633061b0050) at reds.c:316
 #7  0x00007fa69f6b193b in main_dispatcher_self_handle_channel_event (info=0x5633061b0050, event=3, self=0x563304e088c0) at main-dispatcher.c:197
 #8  0x00007fa69f6b193b in main_dispatcher_channel_event (self=0x563304e088c0, event=event@entry=3, info=0x5633061b0050) at main-dispatcher.c:197
 #9  0x00007fa69f6d0833 in red_stream_push_channel_event (s=s@entry=0x563305ad8f50, event=event@entry=3) at red-stream.c:414
 #10 0x00007fa69f6d086b in red_stream_free (s=0x563305ad8f50) at red-stream.c:388
 #11 0x00007fa69f6b7ddc in red_channel_client_finalize (object=0x563304df2360) at red-channel-client.c:347
 #12 0x00007fa6a56b7fb9 in g_object_unref () at /lib64/libgobject-2.0.so.0
 #13 0x00007fa69f6ba212 in red_channel_client_push (rcc=0x563304df2360) at red-channel-client.c:1341
 #14 0x00007fa69f68b259 in red_char_device_send_msg_to_client (client=<optimized out>, msg=0x5633059b6310, dev=0x563304e08bc0) at char-device.c:305
 #15 0x00007fa69f68b259 in red_char_device_send_msg_to_clients (msg=0x5633059b6310, dev=0x563304e08bc0) at char-device.c:305
 #16 0x00007fa69f68b259 in red_char_device_read_from_device (dev=0x563304e08bc0) at char-device.c:353
 #17 0x000056330317d01d in spice_chr_write (chr=0x563304cafe20, buf=0x563304cc50b0 "{\"timestamp\": {\"seconds\": 1532944763, \"microseconds\": 326636}, \"event\": \"SHUTDOWN\", \"data\": {\"guest\": false}}\r\n", len=111) at /home/elmarco/src/qq/chardev/spice.c:199
 #18 0x00005633034deee7 in qemu_chr_write_buffer (s=0x563304cafe20, buf=0x563304cc50b0 "{\"timestamp\": {\"seconds\": 1532944763, \"microseconds\": 326636}, \"event\": \"SHUTDOWN\", \"data\": {\"guest\": false}}\r\n", len=111, offset=0x7ffc6ab5ea70, write_all=false) at /home/elmarco/src/qq/chardev/char.c:112
 #19 0x00005633034df054 in qemu_chr_write (s=0x563304cafe20, buf=0x563304cc50b0 "{\"timestamp\": {\"seconds\": 1532944763, \"microseconds\": 326636}, \"event\": \"SHUTDOWN\", \"data\": {\"guest\": false}}\r\n", len=111, write_all=false) at /home/elmarco/src/qq/chardev/char.c:147
 #20 0x00005633034e1e13 in qemu_chr_fe_write (be=0x563304dbb800, buf=0x563304cc50b0 "{\"timestamp\": {\"seconds\": 1532944763, \"microseconds\": 326636}, \"event\": \"SHUTDOWN\", \"data\": {\"guest\": false}}\r\n", len=111) at /home/elmarco/src/qq/chardev/char-fe.c:42
 #21 0x0000563302fa6334 in monitor_flush_locked (mon=0x563304dbb800) at /home/elmarco/src/qq/monitor.c:425
 #22 0x0000563302fa6520 in monitor_puts (mon=0x563304dbb800, str=0x563305de7e9e "") at /home/elmarco/src/qq/monitor.c:468
 #23 0x0000563302fa680c in qmp_send_response (mon=0x563304dbb800, rsp=0x563304df5730) at /home/elmarco/src/qq/monitor.c:517
 #24 0x0000563302fa6905 in qmp_queue_response (mon=0x563304dbb800, rsp=0x563304df5730) at /home/elmarco/src/qq/monitor.c:538
 #25 0x0000563302fa6b5b in monitor_qapi_event_emit (event=QAPI_EVENT_SHUTDOWN, qdict=0x563304df5730) at /home/elmarco/src/qq/monitor.c:624
 #26 0x0000563302fa6c4b in monitor_qapi_event_queue (event=QAPI_EVENT_SHUTDOWN, qdict=0x563304df5730, errp=0x7ffc6ab5ed00) at /home/elmarco/src/qq/monitor.c:649
 #27 0x0000563303548cce in qapi_event_send_shutdown (guest=false, errp=0x563303d8d0f0 <error_abort>) at qapi/qapi-events-run-state.c:58
 #28 0x000056330313bcd7 in main_loop_should_exit () at /home/elmarco/src/qq/vl.c:1822
 #29 0x000056330313bde3 in main_loop () at /home/elmarco/src/qq/vl.c:1862
 #30 0x0000563303143781 in main (argc=3, argv=0x7ffc6ab5f068, envp=0x7ffc6ab5f088) at /home/elmarco/src/qq/vl.c:4644

Note that error report is now moved to the first caller, which may
receive an error for a recursed event. This is probably fine (95% of
callers use &error_abort, the rest have NULL error and ignore it)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180731150144.14022-1-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[*_no_recurse renamed to *_no_reenter, local variables reordered]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-31 17:42:57 +02:00
Peter Maydell 42e76456cf Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-3.0-pull-request' into staging
Fix safe_syscall() on ppc64 host
Fix mmap() 0 length error case

# gpg: Signature made Tue 31 Jul 2018 09:41:07 BST
# gpg:                using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>"
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-3.0-pull-request:
  linux-user: ppc64: don't use volatile register during safe_syscall
  tests: add check_invalid_maps to test-mmap
  linux-user/mmap.c: handle invalid len maps correctly

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-31 13:52:03 +01:00
Peter Maydell 45a505d0a4 Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Bug fixes.

# gpg: Signature made Mon 30 Jul 2018 13:00:39 BST
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
  backends/cryptodev: remove dead code
  timer: remove replay clock probe in deadline calculation
  i386: implement MSR_SMI_COUNT for TCG
  i386: do not migrate MSR_SMI_COUNT on machine types <2.12

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-31 11:14:53 +01:00
Peter Maydell fd76fef8e5 Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20180731' into staging
fix large guests on s390x

# gpg: Signature made Tue 31 Jul 2018 07:47:38 BST
# gpg:                using RSA key DECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg:                 aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg:                 aka "Cornelia Huck <cohuck@kernel.org>"
# gpg:                 aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20180731:
  s390x/sclp: fix maxram calculation

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-31 10:10:14 +01:00
Shivaprasad G Bhat 5d9f3ea081 linux-user: ppc64: don't use volatile register during safe_syscall
r11 is a volatile register on PPC as per calling conventions.
The safe_syscall code uses it to check if the signal_pending
is set during the safe_syscall. When a syscall is interrupted
on return from signal handling, the r11 might be corrupted
before we retry the syscall leading to a crash. The registers
r0-r13 are not to be used here as they have
volatile/designated/reserved usages.

Change the code to use r14 which is non-volatile.
Use SP+16 which is a slot for LR, for save/restore of previous value
of r14. SP+16 can be used, as LR is preserved across the syscall.

Steps to reproduce:
On PPC host, issue `qemu-x86_64 /usr/bin/cc -E -`
Attempt Ctrl-C, the issue is reproduced.

Reference:
https://refspecs.linuxfoundation.org/ELF/ppc64/PPC-elf64abi-1.9.html#REG
https://openpowerfoundation.org/wp-content/uploads/2016/03/ABI64BitOpenPOWERv1.1_16July2015_pub4.pdf

Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <153301568965.30312.10498134581068746871.stgit@dhcp-9-109-246-16>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-07-31 09:57:43 +02:00
Alex Bennée 28cbb997d6 tests: add check_invalid_maps to test-mmap
This adds a test to make sure we fail properly for a 0 length mmap.
There are most likely other failure conditions we should also check.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: umarcor <1783362@bugs.launchpad.net>
Message-Id: <20180730134321.19898-3-alex.bennee@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-07-31 09:57:25 +02:00
Alex Bennée 38138fab93 linux-user/mmap.c: handle invalid len maps correctly
I've slightly re-organised the check to more closely match the
sequence that the kernel uses in do_mmap(). We check for both the zero
case (EINVAL) and the overflow length case (ENOMEM).

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: umarcor <1783362@bugs.launchpad.net>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180730134321.19898-2-alex.bennee@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-07-31 09:57:25 +02:00
Peter Maydell 7b799ec696 Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:

- qemu-img convert -C is now required to enable copy offloading
- file-posix: Fix write_zeroes with unmap on block devices (would fall
  back to explicit writes on recent kernels)
- Fix query-blockstats interface for use with -blockdev
- Minor fixes and documentation updates

# gpg: Signature made Mon 30 Jul 2018 16:08:14 BST
# gpg:                using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
  qemu-iotests: Test query-blockstats with -drive and -blockdev
  block/qapi: Include anonymous BBs in query-blockstats
  block/qapi: Add 'qdev' field to query-blockstats result
  file-posix: Fix write_zeroes with unmap on block devices
  block: Fix documentation for BDRV_REQ_MAY_UNMAP
  iotests: Add test for 'qemu-img convert -C' compatibility
  qemu-img: Add -C option for convert with copy offloading
  Revert "qemu-img: Document copy offloading implications with -S and -c"
  iotests: Don't lock /dev/null in 226
  docs: Describe using images in writing iotests
  file-posix: Handle EINTR in preallocation=full write
  qcow2: A grammar fix in conflicting cache sizing error message
  qcow: fix a reference leak

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-30 19:11:57 +01:00
Peter Maydell 7aefc14565 Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180730' into staging
target-arm queue:
 * arm/smmuv3: Fix broken VM state migration
 * armv7m_nvic: Fix broken VM state migration
 * hw/arm/sysbus-fdt: Fix assertion in copy_properties_from_host()
 * hw/arm/iotkit: Fix IRQ number for timer1
 * hw/misc/tz-mpc: Zero the LUT on initialization, not just reset
 * target/arm: Remove duplicate 'host' entry in '-cpu ?' output

# gpg: Signature made Mon 30 Jul 2018 15:16:01 BST
# gpg:                using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20180730:
  target/arm: Remove duplicate 'host' entry in '-cpu ?' output
  hw/misc/tz-mpc: Zero the LUT on initialization, not just reset
  hw/arm/iotkit: Fix IRQ number for timer1
  armv7m_nvic: Fix m-security subsection name
  hw/arm/sysbus-fdt: Fix assertion in copy_properties_from_host()
  arm/smmuv3: Fix missing VMSD terminator

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-30 17:27:54 +01:00
Christian Borntraeger 408e5ace51 s390x/sclp: fix maxram calculation
We clamp down ram_size to match the sclp increment size. We do
not do the same for maxram_size, which means for large guests
with some sizes (e.g. -m 50000) maxram_size differs from ram_size.
This can break other code (e.g. CMMA migration) which uses maxram_size
to calculate the number of pages and then throws some errors.

Fixes: 82fab5c5b9 ("s390x/sclp: remove memory hotplug support")
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
CC: qemu-stable@nongnu.org
CC: David Hildenbrand <david@redhat.com>
Message-Id: <1532959766-53343-1-git-send-email-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-07-30 17:41:52 +02:00
Philippe Mathieu-Daudé 0261fb805c target/arm: Remove duplicate 'host' entry in '-cpu ?' output
Since 86f0a186d6 the TYPE_ARM_HOST_CPU is only compiled when CONFIG_KVM
is enabled.

Remove the now redundant special-case introduced in a96c0514ab, to avoid:

  $ qemu-system-aarch64 -machine virt -cpu \? | fgrep host
  host
  host (only available in KVM mode)

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180727132311.2777-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-30 15:07:08 +01:00
Peter Maydell 218fe5ce40 hw/misc/tz-mpc: Zero the LUT on initialization, not just reset
In the tz-mpc device we allocate a data block for the LUT,
which we then clear to zero in the device's reset method.
This is conceptually fine, but unfortunately results in a
valgrind complaint about use of uninitialized data on startup:

==30906== Conditional jump or move depends on uninitialised value(s)
==30906==    at 0x503609: tz_mpc_translate (tz-mpc.c:439)
==30906==    by 0x3F3D90: address_space_translate_iommu (exec.c:511)
==30906==    by 0x3F3FF8: flatview_do_translate (exec.c:584)
==30906==    by 0x3F4292: flatview_translate (exec.c:644)
==30906==    by 0x3F2120: address_space_translate (memory.h:1962)
==30906==    by 0x3FB753: address_space_ldl_internal (memory_ldst.inc.c:36)
==30906==    by 0x3FB8A6: address_space_ldl (memory_ldst.inc.c:80)
==30906==    by 0x619037: ldl_phys (memory_ldst_phys.inc.h:25)
==30906==    by 0x61985D: arm_cpu_reset (cpu.c:255)
==30906==    by 0x98791B: cpu_reset (cpu.c:249)
==30906==    by 0x57FFDB: armv7m_reset (armv7m.c:265)
==30906==    by 0x7B1775: qemu_devices_reset (reset.c:69)

This is because of a reset ordering problem -- the TZ MPC
resets after the CPU, but an M-profile CPU's reset function
includes memory loads to get the initial PC and SP, which
then go through an MPC that hasn't yet been reset.

The simplest fix for this is to zero the LUT when we
initialize the data, which will result in the MPC's
translate function giving the right answers for these
early memory accesses.

Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180724153616.32352-1-peter.maydell@linaro.org
2018-07-30 14:52:15 +01:00
Peter Maydell 984b0c100f hw/arm/iotkit: Fix IRQ number for timer1
A cut-and-paste error meant we were incorrectly wiring up the timer1
IRQ to IRQ3. IRQ3 is the interrupt for timer0 -- move timer0 to
IRQ4 where it belongs.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180727113854.20283-3-peter.maydell@linaro.org
2018-07-30 14:51:40 +01:00
Peter Maydell 942566ffc1 armv7m_nvic: Fix m-security subsection name
The vmstate save/load code insists that subsections of a VMState must
have names which include their parent VMState's name as a leading
substring.  Unfortunately it neither documents this nor checks it on
device init or state save, but instead fails state load with a
confusing error message ("Missing section footer for armv7m_nvic").

Fix the name of the m-security subsection of the NVIC, so that
state save/load works correctly for the security-enabled NVIC.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180727113854.20283-2-peter.maydell@linaro.org
2018-07-30 14:51:40 +01:00
Geert Uytterhoeven d1fb710a9b hw/arm/sysbus-fdt: Fix assertion in copy_properties_from_host()
When copy_properties_from_host() ignores the error for an optional
property, it frees the error, but fails to reset it.

Hence if two or more optional properties are missing, an assertion is
triggered:

    util/error.c:57: error_setv: Assertion `*errp == NULL' failed.

Fis this by resetting err to NULL after ignoring the error.

Fixes: 9481cf2e5f ("hw/arm/sysbus-fdt: helpers for clock node generation")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Message-id: 20180725113000.11014-1-geert+renesas@glider.be
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-30 14:47:32 +01:00
Dr. David Alan Gilbert 758b71f7a3 arm/smmuv3: Fix missing VMSD terminator
The 'vmstate_smmuv3_queue' is missing the end-of-list marker.

Fixes: 10a83cb988
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20180727135406.15132-1-dgilbert@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: dropped stray blank line]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-30 14:45:54 +01:00
Kevin Wolf 1239ac241f qemu-iotests: Test query-blockstats with -drive and -blockdev
Make sure that query-blockstats returns information for every
BlockBackend that is named or attached to a device model (or both).

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-30 15:35:37 +02:00
Kevin Wolf 567dcb31f2 block/qapi: Include anonymous BBs in query-blockstats
Consistent with query-block, query-blockstats should not only include
named BlockBackends, but also those that are anonymous, but belong to a
device model.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2018-07-30 15:35:37 +02:00
Kevin Wolf 5a9cb5a97f block/qapi: Add 'qdev' field to query-blockstats result
Like for query-block, the client needs to identify which BlockBackend
the returned data is for. Anonymous BlockBackends are identified by the
device model they are attached to. Add a 'qdev' field that contains the
qdev ID or QOM path of the attached device model.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2018-07-30 15:35:37 +02:00
Kevin Wolf 34fa110e42 file-posix: Fix write_zeroes with unmap on block devices
The BLKDISCARD ioctl doesn't guarantee that the discarded blocks read as
all-zero afterwards, so don't try to abuse it for zero writing. We try
to only use this if BLKDISCARDZEROES tells us that it is safe, but this
is unreliable on older kernels and a constant 0 in newer kernels. In
other words, this code path is never actually used with newer kernels,
so we don't even try to unmap while writing zeros.

This patch removes the abuse of discard for writing zeroes from
file-posix and instead adds a new function that uses interfaces that are
actually meant to deallocate and zero out at the same time. Only if
those fail, it falls back to zeroing out without unmap. We never fall
back to a discard operation any more that may or may not result in
zeros.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-30 15:35:37 +02:00
Kevin Wolf 52ebcb2682 block: Fix documentation for BDRV_REQ_MAY_UNMAP
BDRV_REQ_MAY_UNMAP in a write_zeroes request does not only allow the
driver to unmap the blocks, but it actively requests that the blocks be
unmapped afterwards if at all possible.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-30 15:35:37 +02:00
Fam Zheng 8ba4f10fa6 iotests: Add test for 'qemu-img convert -C' compatibility
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-30 15:35:37 +02:00
Fam Zheng e11ce12f5e qemu-img: Add -C option for convert with copy offloading
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-30 15:35:37 +02:00
Fam Zheng b85504314f Revert "qemu-img: Document copy offloading implications with -S and -c"
This reverts commit eb461485f4.

Now that we introduce an explicit option, these implicit rules are not
used.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-30 15:35:37 +02:00
Fam Zheng ac49c189b4 iotests: Don't lock /dev/null in 226
On my system (Fedora 28), this script reports a 'failed to get
"consistent read" lock' error. Following docs/devel/testing.rst, it's
better to add locking=off here.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-30 15:35:37 +02:00
Fam Zheng f4a1b6536f docs: Describe using images in writing iotests
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-30 15:35:37 +02:00
Fam Zheng a1c81f4f16 file-posix: Handle EINTR in preallocation=full write
Cc: qemu-stable@nongnu.org
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-30 15:35:37 +02:00
Leonid Bloch 308999e9d4 qcow2: A grammar fix in conflicting cache sizing error message
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-30 15:35:37 +02:00
KONRAD Frederic 41b6513436 qcow: fix a reference leak
Since 42a3e1ab36 qemu asserts when using the
vvfat driver:

git clone git://qemu.org/qemu.git
cd qemu
./configure --target-list=ppc-softmmu --enable-debug
make -j8
mkdir foo
touch foo/hello
./ppc-softmmu/qemu-system-ppc -M prep --nographic --monitor null             \
                              -hda fat:rw:./foo

"Ctrl-C"

qemu-system-ppc: block.c:3368: bdrv_close_all: Assertion                     \
   `((&all_bdrv_states)->tqh_first == ((void *)0))' failed.

This is because we reference bs twice in qcow_co_create(..) one time in
bdrv_open_blockdev_ref(..) and in blk_insert_bs(..) but we unref it only once
in blk_unref which leads to the reference leak.

Note that I didn't tested much QCOW after this change as I don't use it much.

Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-30 15:35:37 +02:00
Jay Zhou cc4c77e12b backends/cryptodev: remove dead code
Fix Coverity issue 1390600.

Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Message-Id: <1524894864-7492-1-git-send-email-jianjay.zhou@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-30 14:00:11 +02:00
Pavel Dovgalyuk e4dab9449a timer: remove replay clock probe in deadline calculation
Ciro Santilli reported that commit a5ed352596
breaks the execution replay. It happens due to the probing the clock
for the new instances of iothread.
However, this probing was made in replay mode for the timer lists that
are empty.
This patch removes clock probing in replay mode.
It is an artifact of the old version with another thread model.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <20180725121526.12867.17866.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-30 14:00:11 +02:00
Paolo Bonzini 1d3db6bdbb i386: implement MSR_SMI_COUNT for TCG
This is trivial, so just do it.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-30 14:00:11 +02:00
Paolo Bonzini 990e0be260 i386: do not migrate MSR_SMI_COUNT on machine types <2.12
MSR_SMI_COUNT started being migrated in QEMU 2.12.  Do not migrate it
on older machine types, or the subsection causes a load failure for
guests that use SMM.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-30 14:00:11 +02:00
Peter Maydell 6d9dd5fb9d Merge remote-tracking branch 'remotes/armbru/tags/pull-qobject-2018-07-27-v2' into staging
QObject patches for 2018-07-27 (3.0.0-rc3)

# gpg: Signature made Sat 28 Jul 2018 08:10:39 BST
# gpg:                using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qobject-2018-07-27-v2:
  qstring: Move qstring_from_substr()'s @end one to the right
  qstring: Assert size calculations don't overflow
  qstring: Fix qstring_from_substr() not to provoke int overflow

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-30 09:55:47 +01:00
Markus Armbruster ba891d68b4 qstring: Move qstring_from_substr()'s @end one to the right
qstring_from_substr() takes the index of the substring's first and
last character.  qstring_from_substr(s, 0, SIZE_MAX) denotes an empty
substring.  Awkward.

Shift the end index one to the right.  This simplifies both
qstring_from_substr() and its callers.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180727062204.10401-3-armbru@redhat.com>
2018-07-28 09:09:58 +02:00
Markus Armbruster b65ab77b3a qstring: Assert size calculations don't overflow
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180727062204.10401-2-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2018-07-28 09:09:58 +02:00
liujunjie ad63c549ec qstring: Fix qstring_from_substr() not to provoke int overflow
qstring_from_substr() parameters @start and @end are of type int.
blkdebug_parse_filename(), blkverify_parse_filename(), nbd_parse_uri(),
and qstring_from_str() pass @end values of type size_t or ptrdiff_t.
Values exceeding INT_MAX get truncated, with possibly disastrous
results.

Such huge substrings seem unlikely, but we found one in a core dump,
where "info tlb" executed via QMP's human-monitor-command apparently
produced 35 GiB of output.

Fix by changing the parameters size_t.

Signed-off-by: liujunjie <liujunjie23@huawei.com>
Message-Id: <20180724134339.17832-1-liujunjie23@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-28 09:09:58 +02:00
153 changed files with 1860 additions and 681 deletions

No files matched your search

+1 -1
View File
@@ -1 +1 @@
2.12.92
3.0.1
-5
View File
@@ -157,7 +157,6 @@ static void cryptodev_vhost_user_event(void *opaque, int event)
{
CryptoDevBackendVhostUser *s = opaque;
CryptoDevBackend *b = CRYPTODEV_BACKEND(s);
Error *err = NULL;
int queues = b->conf.peers.queues;
assert(queues < MAX_CRYPTO_QUEUE_NUM);
@@ -174,10 +173,6 @@ static void cryptodev_vhost_user_event(void *opaque, int event)
cryptodev_vhost_user_stop(queues, s);
break;
}
if (err) {
error_report_err(err);
}
}
static void cryptodev_vhost_user_init(
+2
View File
@@ -2787,6 +2787,7 @@ static BlockDriverState *bdrv_open_inherit(const char *filename,
bdrv_parent_cb_change_media(bs, true);
qobject_unref(options);
options = NULL;
/* For snapshot=on, create a temporary qcow2 overlay. bs points to the
* temporary snapshot afterwards. */
@@ -4394,6 +4395,7 @@ static void coroutine_fn bdrv_co_invalidate_cache(BlockDriverState *bs,
if (parent->role->activate) {
parent->role->activate(parent, &local_err);
if (local_err) {
bs->open_flags |= BDRV_O_INACTIVE;
error_propagate(errp, local_err);
return;
}
+1 -1
View File
@@ -305,7 +305,7 @@ static void blkdebug_parse_filename(const char *filename, QDict *options,
if (c != filename) {
QString *config_path;
config_path = qstring_from_substr(filename, 0, c - filename - 1);
config_path = qstring_from_substr(filename, 0, c - filename);
qdict_put(options, "config", config_path);
}
+1 -1
View File
@@ -80,7 +80,7 @@ static void blkverify_parse_filename(const char *filename, QDict *options,
}
/* TODO Implement option pass-through and set raw.filename here */
raw_path = qstring_from_substr(filename, 0, c - filename - 1);
raw_path = qstring_from_substr(filename, 0, c - filename);
qdict_put(options, "x-raw", raw_path);
/* TODO Allow multi-level nesting and set file.filename here */
+3
View File
@@ -324,6 +324,9 @@ BlockBackend *blk_new(uint64_t perm, uint64_t shared_perm)
blk->shared_perm = shared_perm;
blk_set_enable_write_cache(blk, true);
blk->on_read_error = BLOCKDEV_ON_ERROR_REPORT;
blk->on_write_error = BLOCKDEV_ON_ERROR_ENOSPC;
block_acct_init(&blk->stats);
notifier_list_init(&blk->remove_bs_notifiers);
+47 -15
View File
@@ -648,7 +648,7 @@ static int raw_open_common(BlockDriverState *bs, QDict *options,
}
#endif
bs->supported_zero_flags = s->discard_zeroes ? BDRV_REQ_MAY_UNMAP : 0;
bs->supported_zero_flags = BDRV_REQ_MAY_UNMAP;
ret = 0;
fail:
if (filename && (bdrv_flags & BDRV_O_TEMPORARY)) {
@@ -1487,6 +1487,35 @@ static ssize_t handle_aiocb_write_zeroes(RawPosixAIOData *aiocb)
return -ENOTSUP;
}
static ssize_t handle_aiocb_write_zeroes_unmap(RawPosixAIOData *aiocb)
{
BDRVRawState *s G_GNUC_UNUSED = aiocb->bs->opaque;
int ret;
/* First try to write zeros and unmap at the same time */
#ifdef CONFIG_FALLOCATE_PUNCH_HOLE
ret = do_fallocate(s->fd, FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE,
aiocb->aio_offset, aiocb->aio_nbytes);
if (ret != -ENOTSUP) {
return ret;
}
#endif
#ifdef CONFIG_XFS
if (s->is_xfs) {
/* xfs_discard() guarantees that the discarded area reads as all-zero
* afterwards, so we can use it here. */
return xfs_discard(s, aiocb->aio_offset, aiocb->aio_nbytes);
}
#endif
/* If we couldn't manage to unmap while guaranteed that the area reads as
* all-zero afterwards, just write zeroes without unmapping */
ret = handle_aiocb_write_zeroes(aiocb);
return ret;
}
#ifndef HAVE_COPY_FILE_RANGE
static off_t copy_file_range(int in_fd, off_t *in_off, int out_fd,
off_t *out_off, size_t len, unsigned int flags)
@@ -1646,6 +1675,9 @@ static int handle_aiocb_truncate(RawPosixAIOData *aiocb)
num = MIN(left, 65536);
result = write(fd, buf, num);
if (result < 0) {
if (errno == EINTR) {
continue;
}
result = -errno;
error_setg_errno(errp, -result,
"Could not write zeros for preallocation");
@@ -1729,6 +1761,9 @@ static int aio_worker(void *arg)
case QEMU_AIO_WRITE_ZEROES:
ret = handle_aiocb_write_zeroes(aiocb);
break;
case QEMU_AIO_WRITE_ZEROES | QEMU_AIO_DISCARD:
ret = handle_aiocb_write_zeroes_unmap(aiocb);
break;
case QEMU_AIO_COPY_RANGE:
ret = handle_aiocb_copy_range(aiocb);
break;
@@ -2553,15 +2588,13 @@ static int coroutine_fn raw_co_pwrite_zeroes(
int bytes, BdrvRequestFlags flags)
{
BDRVRawState *s = bs->opaque;
int operation = QEMU_AIO_WRITE_ZEROES;
if (!(flags & BDRV_REQ_MAY_UNMAP)) {
return paio_submit_co(bs, s->fd, offset, NULL, bytes,
QEMU_AIO_WRITE_ZEROES);
} else if (s->discard_zeroes) {
return paio_submit_co(bs, s->fd, offset, NULL, bytes,
QEMU_AIO_DISCARD);
if (flags & BDRV_REQ_MAY_UNMAP) {
operation |= QEMU_AIO_DISCARD;
}
return -ENOTSUP;
return paio_submit_co(bs, s->fd, offset, NULL, bytes, operation);
}
static int raw_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
@@ -3054,20 +3087,19 @@ static coroutine_fn int hdev_co_pwrite_zeroes(BlockDriverState *bs,
int64_t offset, int bytes, BdrvRequestFlags flags)
{
BDRVRawState *s = bs->opaque;
int operation = QEMU_AIO_WRITE_ZEROES | QEMU_AIO_BLKDEV;
int rc;
rc = fd_open(bs);
if (rc < 0) {
return rc;
}
if (!(flags & BDRV_REQ_MAY_UNMAP)) {
return paio_submit_co(bs, s->fd, offset, NULL, bytes,
QEMU_AIO_WRITE_ZEROES|QEMU_AIO_BLKDEV);
} else if (s->discard_zeroes) {
return paio_submit_co(bs, s->fd, offset, NULL, bytes,
QEMU_AIO_DISCARD|QEMU_AIO_BLKDEV);
if (flags & BDRV_REQ_MAY_UNMAP) {
operation |= QEMU_AIO_DISCARD;
}
return -ENOTSUP;
return paio_submit_co(bs, s->fd, offset, NULL, bytes, operation);
}
static int coroutine_fn hdev_co_create_opts(const char *filename, QemuOpts *opts,
+10 -8
View File
@@ -198,7 +198,6 @@ static void coroutine_fn mirror_write_complete(MirrorOp *op, int ret)
{
MirrorBlockJob *s = op->s;
aio_context_acquire(blk_get_aio_context(s->common.blk));
if (ret < 0) {
BlockErrorAction action;
@@ -208,15 +207,14 @@ static void coroutine_fn mirror_write_complete(MirrorOp *op, int ret)
s->ret = ret;
}
}
mirror_iteration_done(op, ret);
aio_context_release(blk_get_aio_context(s->common.blk));
}
static void coroutine_fn mirror_read_complete(MirrorOp *op, int ret)
{
MirrorBlockJob *s = op->s;
aio_context_acquire(blk_get_aio_context(s->common.blk));
if (ret < 0) {
BlockErrorAction action;
@@ -227,12 +225,11 @@ static void coroutine_fn mirror_read_complete(MirrorOp *op, int ret)
}
mirror_iteration_done(op, ret);
} else {
ret = blk_co_pwritev(s->target, op->offset,
op->qiov.size, &op->qiov, 0);
mirror_write_complete(op, ret);
return;
}
aio_context_release(blk_get_aio_context(s->common.blk));
ret = blk_co_pwritev(s->target, op->offset, op->qiov.size, &op->qiov, 0);
mirror_write_complete(op, ret);
}
/* Clip bytes relative to offset to not exceed end-of-file */
@@ -1499,6 +1496,11 @@ static void mirror_start_job(const char *job_id, BlockDriverState *bs,
buf_size = DEFAULT_MIRROR_BUF_SIZE;
}
if (bs == target) {
error_setg(errp, "Can't mirror node into itself");
return;
}
/* In the case of active commit, add dummy driver to provide consistent
* reads on the top, while disabling it in the intermediate nodes, and make
* the backing chain writable. */
+21 -1
View File
@@ -992,11 +992,18 @@ int nbd_client_init(BlockDriverState *bs,
logout("Failed to negotiate with the NBD server\n");
return ret;
}
if (x_dirty_bitmap && !client->info.base_allocation) {
error_setg(errp, "requested x-dirty-bitmap %s not found",
x_dirty_bitmap);
ret = -EINVAL;
goto fail;
}
if (client->info.flags & NBD_FLAG_READ_ONLY &&
!bdrv_is_read_only(bs)) {
error_setg(errp,
"request for write access conflicts with read-only export");
return -EACCES;
ret = -EACCES;
goto fail;
}
if (client->info.flags & NBD_FLAG_SEND_FUA) {
bs->supported_write_flags = BDRV_REQ_FUA;
@@ -1024,4 +1031,17 @@ int nbd_client_init(BlockDriverState *bs,
logout("Established connection with NBD server\n");
return 0;
fail:
/*
* We have connected, but must fail for other reasons. The
* connection is still blocking; send NBD_CMD_DISC as a courtesy
* to the server.
*/
{
NBDRequest request = { .type = NBD_CMD_DISC };
nbd_send_request(client->ioc ?: QIO_CHANNEL(sioc), &request);
return ret;
}
}
+1 -1
View File
@@ -109,7 +109,7 @@ static int nbd_parse_uri(const char *filename, QDict *options)
/* strip braces from literal IPv6 address */
if (uri->server[0] == '[') {
host = qstring_from_substr(uri->server, 1,
strlen(uri->server) - 2);
strlen(uri->server) - 1);
} else {
host = qstring_from_str(uri->server);
}
+12 -25
View File
@@ -569,13 +569,13 @@ static int nvme_init(BlockDriverState *bs, const char *device, int namespace,
s->vfio = qemu_vfio_open_pci(device, errp);
if (!s->vfio) {
ret = -EINVAL;
goto fail;
goto out;
}
s->regs = qemu_vfio_pci_map_bar(s->vfio, 0, 0, NVME_BAR_SIZE, errp);
if (!s->regs) {
ret = -EINVAL;
goto fail;
goto out;
}
/* Perform initialize sequence as described in NVMe spec "7.6.1
@@ -585,7 +585,7 @@ static int nvme_init(BlockDriverState *bs, const char *device, int namespace,
if (!(cap & (1ULL << 37))) {
error_setg(errp, "Device doesn't support NVMe command set");
ret = -EINVAL;
goto fail;
goto out;
}
s->page_size = MAX(4096, 1 << (12 + ((cap >> 48) & 0xF)));
@@ -603,7 +603,7 @@ static int nvme_init(BlockDriverState *bs, const char *device, int namespace,
PRId64 " ms)",
timeout_ms);
ret = -ETIMEDOUT;
goto fail;
goto out;
}
}
@@ -613,7 +613,7 @@ static int nvme_init(BlockDriverState *bs, const char *device, int namespace,
s->queues[0] = nvme_create_queue_pair(bs, 0, NVME_QUEUE_SIZE, errp);
if (!s->queues[0]) {
ret = -EINVAL;
goto fail;
goto out;
}
QEMU_BUILD_BUG_ON(NVME_QUEUE_SIZE & 0xF000);
s->regs->aqa = cpu_to_le32((NVME_QUEUE_SIZE << 16) | NVME_QUEUE_SIZE);
@@ -633,14 +633,14 @@ static int nvme_init(BlockDriverState *bs, const char *device, int namespace,
PRId64 " ms)",
timeout_ms);
ret = -ETIMEDOUT;
goto fail_queue;
goto out;
}
}
ret = qemu_vfio_pci_init_irq(s->vfio, &s->irq_notifier,
VFIO_PCI_MSIX_IRQ_INDEX, errp);
if (ret) {
goto fail_queue;
goto out;
}
aio_set_event_notifier(bdrv_get_aio_context(bs), &s->irq_notifier,
false, nvme_handle_event, nvme_poll_cb);
@@ -649,30 +649,15 @@ static int nvme_init(BlockDriverState *bs, const char *device, int namespace,
if (local_err) {
error_propagate(errp, local_err);
ret = -EIO;
goto fail_handler;
goto out;
}
/* Set up command queues. */
if (!nvme_add_io_queue(bs, errp)) {
ret = -EIO;
goto fail_handler;
}
return 0;
fail_handler:
aio_set_event_notifier(bdrv_get_aio_context(bs), &s->irq_notifier,
false, NULL, NULL);
fail_queue:
nvme_free_queue_pair(bs, s->queues[0]);
fail:
g_free(s->queues);
if (s->regs) {
qemu_vfio_pci_unmap_bar(s->vfio, 0, (void *)s->regs, 0, NVME_BAR_SIZE);
}
if (s->vfio) {
qemu_vfio_close(s->vfio);
}
event_notifier_cleanup(&s->irq_notifier);
out:
/* Cleaning up is done in nvme_file_open() upon error. */
return ret;
}
@@ -739,8 +724,10 @@ static void nvme_close(BlockDriverState *bs)
for (i = 0; i < s->nr_queues; ++i) {
nvme_free_queue_pair(bs, s->queues[i]);
}
g_free(s->queues);
aio_set_event_notifier(bdrv_get_aio_context(bs), &s->irq_notifier,
false, NULL, NULL);
event_notifier_cleanup(&s->irq_notifier);
qemu_vfio_pci_unmap_bar(s->vfio, 0, (void *)s->regs, 0, NVME_BAR_SIZE);
qemu_vfio_close(s->vfio);
}
+17 -2
View File
@@ -593,18 +593,33 @@ BlockStatsList *qmp_query_blockstats(bool has_query_nodes,
p_next = &info->next;
}
} else {
for (blk = blk_next(NULL); blk; blk = blk_next(blk)) {
BlockStatsList *info = g_malloc0(sizeof(*info));
for (blk = blk_all_next(NULL); blk; blk = blk_all_next(blk)) {
BlockStatsList *info;
AioContext *ctx = blk_get_aio_context(blk);
BlockStats *s;
char *qdev;
if (!*blk_name(blk) && !blk_get_attached_dev(blk)) {
continue;
}
aio_context_acquire(ctx);
s = bdrv_query_bds_stats(blk_bs(blk), true);
s->has_device = true;
s->device = g_strdup(blk_name(blk));
qdev = blk_get_attached_dev_id(blk);
if (qdev && *qdev) {
s->has_qdev = true;
s->qdev = qdev;
} else {
g_free(qdev);
}
bdrv_query_blk_stats(s->stats, blk);
aio_context_release(ctx);
info = g_malloc0(sizeof(*info));
info->value = s;
*p_next = info;
p_next = &info->next;
+1
View File
@@ -938,6 +938,7 @@ static int coroutine_fn qcow_co_create(BlockdevCreateOptions *opts,
ret = 0;
exit:
blk_unref(qcow_blk);
bdrv_unref(bs);
qcrypto_block_free(crypto);
return ret;
}
+1 -1
View File
@@ -797,7 +797,7 @@ static void read_cache_sizes(BlockDriverState *bs, QemuOpts *opts,
if (l2_cache_size_set && refcount_cache_size_set) {
error_setg(errp, QCOW2_OPT_CACHE_SIZE ", " QCOW2_OPT_L2_CACHE_SIZE
" and " QCOW2_OPT_REFCOUNT_CACHE_SIZE " may not be set "
"the same time");
"at the same time");
return;
} else if (*l2_cache_size > combined_cache_size) {
error_setg(errp, QCOW2_OPT_L2_CACHE_SIZE " may not exceed "
+76 -14
View File
@@ -655,12 +655,61 @@ failed_opts:
return r;
}
static int qemu_rbd_convert_options(QDict *options, BlockdevOptionsRbd **opts,
Error **errp)
{
Visitor *v;
Error *local_err = NULL;
/* Convert the remaining options into a QAPI object */
v = qobject_input_visitor_new_flat_confused(options, errp);
if (!v) {
return -EINVAL;
}
visit_type_BlockdevOptionsRbd(v, NULL, opts, &local_err);
visit_free(v);
if (local_err) {
error_propagate(errp, local_err);
return -EINVAL;
}
return 0;
}
static int qemu_rbd_attempt_legacy_options(QDict *options,
BlockdevOptionsRbd **opts,
char **keypairs)
{
char *filename;
int r;
filename = g_strdup(qdict_get_try_str(options, "filename"));
if (!filename) {
return -EINVAL;
}
qdict_del(options, "filename");
qemu_rbd_parse_filename(filename, options, NULL);
/* keypairs freed by caller */
*keypairs = g_strdup(qdict_get_try_str(options, "=keyvalue-pairs"));
if (*keypairs) {
qdict_del(options, "=keyvalue-pairs");
}
r = qemu_rbd_convert_options(options, opts, NULL);
g_free(filename);
return r;
}
static int qemu_rbd_open(BlockDriverState *bs, QDict *options, int flags,
Error **errp)
{
BDRVRBDState *s = bs->opaque;
BlockdevOptionsRbd *opts = NULL;
Visitor *v;
const QDictEntry *e;
Error *local_err = NULL;
char *keypairs, *secretid;
@@ -676,20 +725,33 @@ static int qemu_rbd_open(BlockDriverState *bs, QDict *options, int flags,
qdict_del(options, "password-secret");
}
/* Convert the remaining options into a QAPI object */
v = qobject_input_visitor_new_flat_confused(options, errp);
if (!v) {
r = -EINVAL;
goto out;
}
visit_type_BlockdevOptionsRbd(v, NULL, &opts, &local_err);
visit_free(v);
r = qemu_rbd_convert_options(options, &opts, &local_err);
if (local_err) {
error_propagate(errp, local_err);
r = -EINVAL;
goto out;
/* If keypairs are present, that means some options are present in
* the modern option format. Don't attempt to parse legacy option
* formats, as we won't support mixed usage. */
if (keypairs) {
error_propagate(errp, local_err);
goto out;
}
/* If the initial attempt to convert and process the options failed,
* we may be attempting to open an image file that has the rbd options
* specified in the older format consisting of all key/value pairs
* encoded in the filename. Go ahead and attempt to parse the
* filename, and see if we can pull out the required options. */
r = qemu_rbd_attempt_legacy_options(options, &opts, &keypairs);
if (r < 0) {
/* Propagate the original error, not the legacy parsing fallback
* error, as the latter was just a best-effort attempt. */
error_propagate(errp, local_err);
goto out;
}
/* Take care whenever deciding to actually deprecate; once this ability
* is removed, we will not be able to open any images with legacy-styled
* backing image strings. */
error_report("RBD options encoded in the filename as keyvalue pairs "
"is deprecated");
}
/* Remove the processed options from the QDict (the visitor processes
Vendored
+2 -5
View File
@@ -2216,13 +2216,10 @@ fi
##########################################
# libseccomp check
libseccomp_minver="2.2.0"
if test "$seccomp" != "no" ; then
case "$cpu" in
i386|x86_64)
libseccomp_minver="2.1.0"
;;
mips)
libseccomp_minver="2.2.0"
i386|x86_64|mips)
;;
arm|aarch64)
libseccomp_minver="2.2.3"
+11
View File
@@ -255,6 +255,17 @@ comparable library support for invoking and interacting with QEMU programs. If
you opt for Python, it is strongly recommended to write Python 3 compatible
code.
Both Python and Bash frameworks in iotests provide helpers to manage test
images. They can be used to create and clean up images under the test
directory. If no I/O or any protocol specific feature is needed, it is often
more convenient to use the pseudo block driver, ``null-co://``, as the test
image, which doesn't require image creation or cleaning up. Avoid system-wide
devices or files whenever possible, such as ``/dev/null`` or ``/dev/zero``.
Otherwise, image locking implications have to be considered. For example,
another application on the host may have locked the file, possibly leading to a
test failure. If using such devices are explicitly desired, consider adding
``locking=off`` option to disable image locking.
Docker based tests
==================
+6 -4
View File
@@ -690,7 +690,7 @@ static void tcg_register_iommu_notifier(CPUState *cpu,
int i;
for (i = 0; i < cpu->iommu_notifiers->len; i++) {
notifier = &g_array_index(cpu->iommu_notifiers, TCGIOMMUNotifier, i);
notifier = g_array_index(cpu->iommu_notifiers, TCGIOMMUNotifier *, i);
if (notifier->mr == mr && notifier->iommu_idx == iommu_idx) {
break;
}
@@ -698,7 +698,8 @@ static void tcg_register_iommu_notifier(CPUState *cpu,
if (i == cpu->iommu_notifiers->len) {
/* Not found, add a new entry at the end of the array */
cpu->iommu_notifiers = g_array_set_size(cpu->iommu_notifiers, i + 1);
notifier = &g_array_index(cpu->iommu_notifiers, TCGIOMMUNotifier, i);
notifier = g_new0(TCGIOMMUNotifier, 1);
g_array_index(cpu->iommu_notifiers, TCGIOMMUNotifier *, i) = notifier;
notifier->mr = mr;
notifier->iommu_idx = iommu_idx;
@@ -730,8 +731,9 @@ static void tcg_iommu_free_notifier_list(CPUState *cpu)
TCGIOMMUNotifier *notifier;
for (i = 0; i < cpu->iommu_notifiers->len; i++) {
notifier = &g_array_index(cpu->iommu_notifiers, TCGIOMMUNotifier, i);
notifier = g_array_index(cpu->iommu_notifiers, TCGIOMMUNotifier *, i);
memory_region_unregister_iommu_notifier(notifier->mr, &notifier->n);
g_free(notifier);
}
g_array_free(cpu->iommu_notifiers, true);
}
@@ -1000,7 +1002,7 @@ void cpu_exec_realizefn(CPUState *cpu, Error **errp)
vmstate_register(NULL, cpu->cpu_index, cc->vmsd, cpu);
}
cpu->iommu_notifiers = g_array_new(false, true, sizeof(TCGIOMMUNotifier));
cpu->iommu_notifiers = g_array_new(false, true, sizeof(TCGIOMMUNotifier *));
#endif
}
+3
View File
@@ -2840,6 +2840,7 @@ static void coroutine_fn v9fs_wstat(void *opaque)
struct stat stbuf;
V9fsFidState *fidp;
V9fsPDU *pdu = opaque;
V9fsState *s = pdu->s;
v9fs_stat_init(&v9stat);
err = pdu_unmarshal(pdu, offset, "dwS", &fid, &unused, &v9stat);
@@ -2905,7 +2906,9 @@ static void coroutine_fn v9fs_wstat(void *opaque)
}
}
if (v9stat.name.size != 0) {
v9fs_path_write_lock(s);
err = v9fs_complete_rename(pdu, fidp, -1, &v9stat.name);
v9fs_path_unlock(s);
if (err < 0) {
goto out;
}
+1
View File
@@ -173,6 +173,7 @@ static int vmstate_acpi_post_load(void *opaque, int version_id)
PIIX4PMState *s = opaque;
pm_io_space_update(s);
smbus_io_space_update(s);
return 0;
}
+1 -1
View File
@@ -382,7 +382,7 @@ static void iotkit_realize(DeviceState *dev, Error **errp)
return;
}
sysbus_connect_irq(SYS_BUS_DEVICE(&s->timer1), 0,
qdev_get_gpio_in(DEVICE(&s->armv7m), 3));
qdev_get_gpio_in(DEVICE(&s->armv7m), 4));
mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->timer1), 0);
object_property_set_link(OBJECT(&s->apb_ppc0), OBJECT(mr), "port[1]", &err);
if (err) {
+1
View File
@@ -1414,6 +1414,7 @@ static const VMStateDescription vmstate_smmuv3_queue = {
VMSTATE_UINT32(prod, SMMUQueue),
VMSTATE_UINT32(cons, SMMUQueue),
VMSTATE_UINT8(log2size, SMMUQueue),
VMSTATE_END_OF_LIST(),
},
};
+1
View File
@@ -107,6 +107,7 @@ static void copy_properties_from_host(HostProperty *props, int nb_props,
/* mandatory property not found: bail out */
exit(1);
}
err = NULL;
}
}
}
+2
View File
@@ -1881,6 +1881,8 @@ static void virt_machine_2_10_options(MachineClass *mc)
{
virt_machine_2_11_options(mc);
SET_MACHINE_COMPAT(mc, VIRT_COMPAT_2_10);
/* before 2.11 we never faulted accesses to bad addresses */
mc->ignore_memory_transaction_failures = true;
}
DEFINE_VIRT_MACHINE(2, 10)
+2 -2
View File
@@ -72,8 +72,8 @@ typedef struct fm_opl_f {
/* Rhythm sention */
uint8_t rhythm; /* Rhythm mode , key flag */
/* time tables */
int32_t AR_TABLE[75]; /* atttack rate tables */
int32_t DR_TABLE[75]; /* decay rate tables */
int32_t AR_TABLE[76]; /* attack rate tables */
int32_t DR_TABLE[76]; /* decay rate tables */
uint32_t FN_TABLE[1024]; /* fnumber -> increment counter */
/* LFO */
int32_t *ams_table;
+1 -1
View File
@@ -1617,7 +1617,7 @@ static void fdctrl_stop_transfer(FDCtrl *fdctrl, uint8_t status0,
fdctrl->fifo[5] = cur_drv->sect;
fdctrl->fifo[6] = FD_SECTOR_SC;
fdctrl->data_dir = FD_DIR_READ;
if (!(fdctrl->msr & FD_MSR_NONDMA)) {
if (fdctrl->dma_chann != -1 && !(fdctrl->msr & FD_MSR_NONDMA)) {
IsaDmaClass *k = ISADMA_GET_CLASS(fdctrl->dma);
k->release_DREQ(fdctrl->dma, fdctrl->dma_chann);
}
+1 -1
View File
@@ -1192,7 +1192,7 @@ static const MemoryRegionOps nvme_cmb_ops = {
.write = nvme_cmb_write,
.endianness = DEVICE_LITTLE_ENDIAN,
.impl = {
.min_access_size = 2,
.min_access_size = 1,
.max_access_size = 8,
},
};
+3 -3
View File
@@ -667,9 +667,9 @@ static void virtio_serial_save_device(VirtIODevice *vdev, QEMUFile *f)
/* The config space (ignored on the far end in current versions) */
get_config(vdev, (uint8_t *)&config);
qemu_put_be16s(f, &config.cols);
qemu_put_be16s(f, &config.rows);
qemu_put_be32s(f, &config.max_nr_ports);
qemu_put_be16(f, config.cols);
qemu_put_be16(f, config.rows);
qemu_put_be32(f, config.max_nr_ports);
/* The ports map */
max_nr_ports = s->serial.max_virtserial_ports;
+5
View File
@@ -421,6 +421,11 @@ static void virtio_gpu_disable_scanout(VirtIOGPU *g, int scanout_id)
scanout->height ?: 480,
"Guest disabled display.");
}
if (g->disable_scanout) {
g->disable_scanout(g, scanout_id);
}
dpy_gfx_replace_surface(scanout->con, ds);
scanout->resource_id = 0;
scanout->ds = NULL;
+11
View File
@@ -75,6 +75,16 @@ static void virtio_vga_gl_block(void *opaque, bool block)
}
}
static void virtio_vga_disable_scanout(VirtIOGPU *g, int scanout_id)
{
VirtIOVGA *vvga = container_of(g, VirtIOVGA, vdev);
if (scanout_id == 0) {
/* reset surface if needed */
vvga->vga.graphic_mode = -1;
}
}
static const GraphicHwOps virtio_vga_ops = {
.invalidate = virtio_vga_invalidate_display,
.gfx_update = virtio_vga_update_display,
@@ -156,6 +166,7 @@ static void virtio_vga_realize(VirtIOPCIProxy *vpci_dev, Error **errp)
vvga->vga_mrs, true);
vga->con = g->scanout[0].con;
g->disable_scanout = virtio_vga_disable_scanout;
graphic_console_set_hwops(vga->con, &virtio_vga_ops, vvga);
for (i = 0; i < g->conf.max_outputs; i++) {
-2
View File
@@ -3,8 +3,6 @@
#include "hw/i2c/i2c.h"
typedef struct bitbang_i2c_interface bitbang_i2c_interface;
#define BITBANG_I2C_SDA 0
#define BITBANG_I2C_SCL 1
+5 -1
View File
@@ -193,7 +193,11 @@ static int smbus_i2c_send(I2CSlave *s, uint8_t data)
switch (dev->mode) {
case SMBUS_WRITE_DATA:
DPRINTF("Write data %02x\n", data);
dev->data_buf[dev->data_len++] = data;
if (dev->data_len >= sizeof(dev->data_buf)) {
BADF("Too many bytes sent\n");
} else {
dev->data_buf[dev->data_len++] = data;
}
break;
default:
BADF("Unexpected write in state %d\n", dev->mode);
+20 -57
View File
@@ -2134,8 +2134,16 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
build_append_pci_bus_devices(scope, bus, pm->pcihp_bridge_en);
if (TPM_IS_TIS(tpm_find())) {
dev = aml_device("ISA.TPM");
aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0C31")));
if (misc->tpm_version == TPM_VERSION_2_0) {
dev = aml_device("TPM");
aml_append(dev, aml_name_decl("_HID",
aml_string("MSFT0101")));
} else {
dev = aml_device("ISA.TPM");
aml_append(dev, aml_name_decl("_HID",
aml_eisaid("PNP0C31")));
}
aml_append(dev, aml_name_decl("_STA", aml_int(0xF)));
crs = aml_resource_template();
aml_append(crs, aml_memory32_fixed(TPM_TIS_ADDR_BASE,
@@ -2251,55 +2259,6 @@ build_tpm2(GArray *table_data, BIOSLinker *linker, GArray *tcpalog)
#define HOLE_640K_START (640 * KiB)
#define HOLE_640K_END (1 * MiB)
static void build_srat_hotpluggable_memory(GArray *table_data, uint64_t base,
uint64_t len, int default_node)
{
MemoryDeviceInfoList *info_list = qmp_memory_device_list();
MemoryDeviceInfoList *info;
MemoryDeviceInfo *mi;
PCDIMMDeviceInfo *di;
uint64_t end = base + len, cur, size;
bool is_nvdimm;
AcpiSratMemoryAffinity *numamem;
MemoryAffinityFlags flags;
for (cur = base, info = info_list;
cur < end;
cur += size, info = info->next) {
numamem = acpi_data_push(table_data, sizeof *numamem);
if (!info) {
build_srat_memory(numamem, cur, end - cur, default_node,
MEM_AFFINITY_HOTPLUGGABLE | MEM_AFFINITY_ENABLED);
break;
}
mi = info->value;
is_nvdimm = (mi->type == MEMORY_DEVICE_INFO_KIND_NVDIMM);
di = !is_nvdimm ? mi->u.dimm.data : mi->u.nvdimm.data;
if (cur < di->addr) {
build_srat_memory(numamem, cur, di->addr - cur, default_node,
MEM_AFFINITY_HOTPLUGGABLE | MEM_AFFINITY_ENABLED);
numamem = acpi_data_push(table_data, sizeof *numamem);
}
size = di->size;
flags = MEM_AFFINITY_ENABLED;
if (di->hotpluggable) {
flags |= MEM_AFFINITY_HOTPLUGGABLE;
}
if (is_nvdimm) {
flags |= MEM_AFFINITY_NON_VOLATILE;
}
build_srat_memory(numamem, di->addr, size, di->node, flags);
}
qapi_free_MemoryDeviceInfoList(info_list);
}
static void
build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
{
@@ -2392,9 +2351,12 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
mem_len = next_base - pcms->below_4g_mem_size;
next_base = mem_base + mem_len;
}
numamem = acpi_data_push(table_data, sizeof *numamem);
build_srat_memory(numamem, mem_base, mem_len, i - 1,
MEM_AFFINITY_ENABLED);
if (mem_len > 0) {
numamem = acpi_data_push(table_data, sizeof *numamem);
build_srat_memory(numamem, mem_base, mem_len, i - 1,
MEM_AFFINITY_ENABLED);
}
}
slots = (table_data->len - numa_start) / sizeof *numamem;
for (; slots < pcms->numa_nodes + 2; slots++) {
@@ -2411,9 +2373,10 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
* providing _PXM method if necessary.
*/
if (hotplugabble_address_space_size) {
build_srat_hotpluggable_memory(table_data, machine->device_memory->base,
hotplugabble_address_space_size,
pcms->numa_nodes - 1);
numamem = acpi_data_push(table_data, sizeof *numamem);
build_srat_memory(numamem, machine->device_memory->base,
hotplugabble_address_space_size, pcms->numa_nodes - 1,
MEM_AFFINITY_HOTPLUGGABLE | MEM_AFFINITY_ENABLED);
}
build_header(linker, table_data,
+23 -11
View File
@@ -37,6 +37,8 @@
#include "kvm_i386.h"
#include "trace.h"
static void vtd_address_space_refresh_all(IntelIOMMUState *s);
static void vtd_define_quad(IntelIOMMUState *s, hwaddr addr, uint64_t val,
uint64_t wmask, uint64_t w1cmask)
{
@@ -227,6 +229,14 @@ static void vtd_reset_iotlb(IntelIOMMUState *s)
vtd_iommu_unlock(s);
}
static void vtd_reset_caches(IntelIOMMUState *s)
{
vtd_iommu_lock(s);
vtd_reset_iotlb_locked(s);
vtd_reset_context_cache_locked(s);
vtd_iommu_unlock(s);
}
static uint64_t vtd_get_iotlb_key(uint64_t gfn, uint16_t source_id,
uint32_t level)
{
@@ -1418,7 +1428,7 @@ static void vtd_context_global_invalidate(IntelIOMMUState *s)
vtd_reset_context_cache_locked(s);
}
vtd_iommu_unlock(s);
vtd_switch_address_space_all(s);
vtd_address_space_refresh_all(s);
/*
* From VT-d spec 6.5.2.1, a global context entry invalidation
* should be followed by a IOTLB global invalidation, so we should
@@ -1703,6 +1713,8 @@ static void vtd_handle_gcmd_srtp(IntelIOMMUState *s)
vtd_root_table_setup(s);
/* Ok - report back to driver */
vtd_set_clear_mask_long(s, DMAR_GSTS_REG, 0, VTD_GSTS_RTPS);
vtd_reset_caches(s);
vtd_address_space_refresh_all(s);
}
/* Set Interrupt Remap Table Pointer */
@@ -1735,7 +1747,8 @@ static void vtd_handle_gcmd_te(IntelIOMMUState *s, bool en)
vtd_set_clear_mask_long(s, DMAR_GSTS_REG, VTD_GSTS_TES, 0);
}
vtd_switch_address_space_all(s);
vtd_reset_caches(s);
vtd_address_space_refresh_all(s);
}
/* Handle Interrupt Remap Enable/Disable */
@@ -3014,6 +3027,12 @@ static void vtd_address_space_unmap_all(IntelIOMMUState *s)
}
}
static void vtd_address_space_refresh_all(IntelIOMMUState *s)
{
vtd_address_space_unmap_all(s);
vtd_switch_address_space_all(s);
}
static int vtd_replay_hook(IOMMUTLBEntry *entry, void *private)
{
memory_region_notify_one((IOMMUNotifier *)private, entry);
@@ -3123,10 +3142,7 @@ static void vtd_init(IntelIOMMUState *s)
s->cap |= VTD_CAP_CM;
}
vtd_iommu_lock(s);
vtd_reset_context_cache_locked(s);
vtd_reset_iotlb_locked(s);
vtd_iommu_unlock(s);
vtd_reset_caches(s);
/* Define registers with default values and bit semantics */
vtd_define_long(s, DMAR_VER_REG, 0x10UL, 0, 0);
@@ -3189,11 +3205,7 @@ static void vtd_reset(DeviceState *dev)
IntelIOMMUState *s = INTEL_IOMMU_DEVICE(dev);
vtd_init(s);
/*
* When device reset, throw away all mappings and external caches
*/
vtd_address_space_unmap_all(s);
vtd_address_space_refresh_all(s);
}
static AddressSpace *vtd_host_dma_iommu(PCIBus *bus, void *opaque, int devfn)
+142 -142
View File
@@ -29,148 +29,11 @@
#include "hw/arm/linux-boot-if.h"
#include "sysemu/kvm.h"
static int gicv3_pre_save(void *opaque)
static void gicv3_gicd_no_migration_shift_bug_post_load(GICv3State *cs)
{
GICv3State *s = (GICv3State *)opaque;
ARMGICv3CommonClass *c = ARM_GICV3_COMMON_GET_CLASS(s);
if (c->pre_save) {
c->pre_save(s);
}
return 0;
}
static int gicv3_post_load(void *opaque, int version_id)
{
GICv3State *s = (GICv3State *)opaque;
ARMGICv3CommonClass *c = ARM_GICV3_COMMON_GET_CLASS(s);
if (c->post_load) {
c->post_load(s);
}
return 0;
}
static bool virt_state_needed(void *opaque)
{
GICv3CPUState *cs = opaque;
return cs->num_list_regs != 0;
}
static const VMStateDescription vmstate_gicv3_cpu_virt = {
.name = "arm_gicv3_cpu/virt",
.version_id = 1,
.minimum_version_id = 1,
.needed = virt_state_needed,
.fields = (VMStateField[]) {
VMSTATE_UINT64_2DARRAY(ich_apr, GICv3CPUState, 3, 4),
VMSTATE_UINT64(ich_hcr_el2, GICv3CPUState),
VMSTATE_UINT64_ARRAY(ich_lr_el2, GICv3CPUState, GICV3_LR_MAX),
VMSTATE_UINT64(ich_vmcr_el2, GICv3CPUState),
VMSTATE_END_OF_LIST()
}
};
static int icc_sre_el1_reg_pre_load(void *opaque)
{
GICv3CPUState *cs = opaque;
/*
* If the sre_el1 subsection is not transferred this
* means SRE_EL1 is 0x7 (which might not be the same as
* our reset value).
*/
cs->icc_sre_el1 = 0x7;
return 0;
}
static bool icc_sre_el1_reg_needed(void *opaque)
{
GICv3CPUState *cs = opaque;
return cs->icc_sre_el1 != 7;
}
const VMStateDescription vmstate_gicv3_cpu_sre_el1 = {
.name = "arm_gicv3_cpu/sre_el1",
.version_id = 1,
.minimum_version_id = 1,
.pre_load = icc_sre_el1_reg_pre_load,
.needed = icc_sre_el1_reg_needed,
.fields = (VMStateField[]) {
VMSTATE_UINT64(icc_sre_el1, GICv3CPUState),
VMSTATE_END_OF_LIST()
}
};
static const VMStateDescription vmstate_gicv3_cpu = {
.name = "arm_gicv3_cpu",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT32(level, GICv3CPUState),
VMSTATE_UINT32(gicr_ctlr, GICv3CPUState),
VMSTATE_UINT32_ARRAY(gicr_statusr, GICv3CPUState, 2),
VMSTATE_UINT32(gicr_waker, GICv3CPUState),
VMSTATE_UINT64(gicr_propbaser, GICv3CPUState),
VMSTATE_UINT64(gicr_pendbaser, GICv3CPUState),
VMSTATE_UINT32(gicr_igroupr0, GICv3CPUState),
VMSTATE_UINT32(gicr_ienabler0, GICv3CPUState),
VMSTATE_UINT32(gicr_ipendr0, GICv3CPUState),
VMSTATE_UINT32(gicr_iactiver0, GICv3CPUState),
VMSTATE_UINT32(edge_trigger, GICv3CPUState),
VMSTATE_UINT32(gicr_igrpmodr0, GICv3CPUState),
VMSTATE_UINT32(gicr_nsacr, GICv3CPUState),
VMSTATE_UINT8_ARRAY(gicr_ipriorityr, GICv3CPUState, GIC_INTERNAL),
VMSTATE_UINT64_ARRAY(icc_ctlr_el1, GICv3CPUState, 2),
VMSTATE_UINT64(icc_pmr_el1, GICv3CPUState),
VMSTATE_UINT64_ARRAY(icc_bpr, GICv3CPUState, 3),
VMSTATE_UINT64_2DARRAY(icc_apr, GICv3CPUState, 3, 4),
VMSTATE_UINT64_ARRAY(icc_igrpen, GICv3CPUState, 3),
VMSTATE_UINT64(icc_ctlr_el3, GICv3CPUState),
VMSTATE_END_OF_LIST()
},
.subsections = (const VMStateDescription * []) {
&vmstate_gicv3_cpu_virt,
NULL
},
.subsections = (const VMStateDescription * []) {
&vmstate_gicv3_cpu_sre_el1,
NULL
}
};
static int gicv3_gicd_no_migration_shift_bug_pre_load(void *opaque)
{
GICv3State *cs = opaque;
/*
* The gicd_no_migration_shift_bug flag is used for migration compatibility
* for old version QEMU which may have the GICD bmp shift bug under KVM mode.
* Strictly, what we want to know is whether the migration source is using
* KVM. Since we don't have any way to determine that, we look at whether the
* destination is using KVM; this is close enough because for the older QEMU
* versions with this bug KVM -> TCG migration didn't work anyway. If the
* source is a newer QEMU without this bug it will transmit the migration
* subsection which sets the flag to true; otherwise it will remain set to
* the value we select here.
*/
if (kvm_enabled()) {
cs->gicd_no_migration_shift_bug = false;
}
return 0;
}
static int gicv3_gicd_no_migration_shift_bug_post_load(void *opaque,
int version_id)
{
GICv3State *cs = opaque;
if (cs->gicd_no_migration_shift_bug) {
return 0;
return;
}
/* Older versions of QEMU had a bug in the handling of state save/restore
@@ -199,16 +62,152 @@ static int gicv3_gicd_no_migration_shift_bug_post_load(void *opaque,
* for next migration to work from this new version QEMU.
*/
cs->gicd_no_migration_shift_bug = true;
}
static int gicv3_pre_save(void *opaque)
{
GICv3State *s = (GICv3State *)opaque;
ARMGICv3CommonClass *c = ARM_GICV3_COMMON_GET_CLASS(s);
if (c->pre_save) {
c->pre_save(s);
}
return 0;
}
static int gicv3_post_load(void *opaque, int version_id)
{
GICv3State *s = (GICv3State *)opaque;
ARMGICv3CommonClass *c = ARM_GICV3_COMMON_GET_CLASS(s);
gicv3_gicd_no_migration_shift_bug_post_load(s);
if (c->post_load) {
c->post_load(s);
}
return 0;
}
static bool virt_state_needed(void *opaque)
{
GICv3CPUState *cs = opaque;
return cs->num_list_regs != 0;
}
static const VMStateDescription vmstate_gicv3_cpu_virt = {
.name = "arm_gicv3_cpu/virt",
.version_id = 1,
.minimum_version_id = 1,
.needed = virt_state_needed,
.fields = (VMStateField[]) {
VMSTATE_UINT64_2DARRAY(ich_apr, GICv3CPUState, 3, 4),
VMSTATE_UINT64(ich_hcr_el2, GICv3CPUState),
VMSTATE_UINT64_ARRAY(ich_lr_el2, GICv3CPUState, GICV3_LR_MAX),
VMSTATE_UINT64(ich_vmcr_el2, GICv3CPUState),
VMSTATE_END_OF_LIST()
}
};
static int vmstate_gicv3_cpu_pre_load(void *opaque)
{
GICv3CPUState *cs = opaque;
/*
* If the sre_el1 subsection is not transferred this
* means SRE_EL1 is 0x7 (which might not be the same as
* our reset value).
*/
cs->icc_sre_el1 = 0x7;
return 0;
}
static bool icc_sre_el1_reg_needed(void *opaque)
{
GICv3CPUState *cs = opaque;
return cs->icc_sre_el1 != 7;
}
const VMStateDescription vmstate_gicv3_cpu_sre_el1 = {
.name = "arm_gicv3_cpu/sre_el1",
.version_id = 1,
.minimum_version_id = 1,
.needed = icc_sre_el1_reg_needed,
.fields = (VMStateField[]) {
VMSTATE_UINT64(icc_sre_el1, GICv3CPUState),
VMSTATE_END_OF_LIST()
}
};
static const VMStateDescription vmstate_gicv3_cpu = {
.name = "arm_gicv3_cpu",
.version_id = 1,
.minimum_version_id = 1,
.pre_load = vmstate_gicv3_cpu_pre_load,
.fields = (VMStateField[]) {
VMSTATE_UINT32(level, GICv3CPUState),
VMSTATE_UINT32(gicr_ctlr, GICv3CPUState),
VMSTATE_UINT32_ARRAY(gicr_statusr, GICv3CPUState, 2),
VMSTATE_UINT32(gicr_waker, GICv3CPUState),
VMSTATE_UINT64(gicr_propbaser, GICv3CPUState),
VMSTATE_UINT64(gicr_pendbaser, GICv3CPUState),
VMSTATE_UINT32(gicr_igroupr0, GICv3CPUState),
VMSTATE_UINT32(gicr_ienabler0, GICv3CPUState),
VMSTATE_UINT32(gicr_ipendr0, GICv3CPUState),
VMSTATE_UINT32(gicr_iactiver0, GICv3CPUState),
VMSTATE_UINT32(edge_trigger, GICv3CPUState),
VMSTATE_UINT32(gicr_igrpmodr0, GICv3CPUState),
VMSTATE_UINT32(gicr_nsacr, GICv3CPUState),
VMSTATE_UINT8_ARRAY(gicr_ipriorityr, GICv3CPUState, GIC_INTERNAL),
VMSTATE_UINT64_ARRAY(icc_ctlr_el1, GICv3CPUState, 2),
VMSTATE_UINT64(icc_pmr_el1, GICv3CPUState),
VMSTATE_UINT64_ARRAY(icc_bpr, GICv3CPUState, 3),
VMSTATE_UINT64_2DARRAY(icc_apr, GICv3CPUState, 3, 4),
VMSTATE_UINT64_ARRAY(icc_igrpen, GICv3CPUState, 3),
VMSTATE_UINT64(icc_ctlr_el3, GICv3CPUState),
VMSTATE_END_OF_LIST()
},
.subsections = (const VMStateDescription * []) {
&vmstate_gicv3_cpu_virt,
&vmstate_gicv3_cpu_sre_el1,
NULL
}
};
static int gicv3_pre_load(void *opaque)
{
GICv3State *cs = opaque;
/*
* The gicd_no_migration_shift_bug flag is used for migration compatibility
* for old version QEMU which may have the GICD bmp shift bug under KVM mode.
* Strictly, what we want to know is whether the migration source is using
* KVM. Since we don't have any way to determine that, we look at whether the
* destination is using KVM; this is close enough because for the older QEMU
* versions with this bug KVM -> TCG migration didn't work anyway. If the
* source is a newer QEMU without this bug it will transmit the migration
* subsection which sets the flag to true; otherwise it will remain set to
* the value we select here.
*/
if (kvm_enabled()) {
cs->gicd_no_migration_shift_bug = false;
}
return 0;
}
static bool needed_always(void *opaque)
{
return true;
}
const VMStateDescription vmstate_gicv3_gicd_no_migration_shift_bug = {
.name = "arm_gicv3/gicd_no_migration_shift_bug",
.version_id = 1,
.minimum_version_id = 1,
.pre_load = gicv3_gicd_no_migration_shift_bug_pre_load,
.post_load = gicv3_gicd_no_migration_shift_bug_post_load,
.needed = needed_always,
.fields = (VMStateField[]) {
VMSTATE_BOOL(gicd_no_migration_shift_bug, GICv3State),
VMSTATE_END_OF_LIST()
@@ -219,6 +218,7 @@ static const VMStateDescription vmstate_gicv3 = {
.name = "arm_gicv3",
.version_id = 1,
.minimum_version_id = 1,
.pre_load = gicv3_pre_load,
.pre_save = gicv3_pre_save,
.post_load = gicv3_post_load,
.priority = MIG_PRI_GICV3,
+1 -1
View File
@@ -2064,7 +2064,7 @@ static int nvic_security_post_load(void *opaque, int version_id)
}
static const VMStateDescription vmstate_nvic_security = {
.name = "nvic/m-security",
.name = "armv7m_nvic/m-security",
.version_id = 1,
.minimum_version_id = 1,
.needed = nvic_security_needed,
+2 -3
View File
@@ -554,9 +554,8 @@ static void cuda_init(Object *obj)
CUDAState *s = CUDA(obj);
SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
object_initialize(&s->mos6522_cuda, sizeof(s->mos6522_cuda),
TYPE_MOS6522_CUDA);
qdev_set_parent_bus(DEVICE(&s->mos6522_cuda), sysbus_get_default());
sysbus_init_child_obj(obj, "mos6522-cuda", &s->mos6522_cuda,
sizeof(s->mos6522_cuda), TYPE_MOS6522_CUDA);
memory_region_init_io(&s->mem, obj, &mos6522_cuda_ops, s, "cuda", 0x2000);
sysbus_init_mmio(sbd, &s->mem);
+8 -16
View File
@@ -209,14 +209,11 @@ static void macio_oldworld_realize(PCIDevice *d, Error **errp)
static void macio_init_ide(MacIOState *s, MACIOIDEState *ide, size_t ide_size,
int index)
{
gchar *name;
gchar *name = g_strdup_printf("ide[%i]", index);
object_initialize(ide, ide_size, TYPE_MACIO_IDE);
qdev_set_parent_bus(DEVICE(ide), sysbus_get_default());
sysbus_init_child_obj(OBJECT(s), name, ide, ide_size, TYPE_MACIO_IDE);
memory_region_add_subregion(&s->bar, 0x1f000 + ((index + 1) * 0x1000),
&ide->mem);
name = g_strdup_printf("ide[%i]", index);
object_property_add_child(OBJECT(s), name, OBJECT(ide), NULL);
g_free(name);
}
@@ -232,9 +229,7 @@ static void macio_oldworld_init(Object *obj)
qdev_prop_allow_set_link_before_realize,
0, NULL);
object_initialize(&s->cuda, sizeof(s->cuda), TYPE_CUDA);
qdev_set_parent_bus(DEVICE(&s->cuda), sysbus_get_default());
object_property_add_child(obj, "cuda", OBJECT(&s->cuda), NULL);
sysbus_init_child_obj(obj, "cuda", &s->cuda, sizeof(s->cuda), TYPE_CUDA);
object_initialize(&os->nvram, sizeof(os->nvram), TYPE_MACIO_NVRAM);
dev = DEVICE(&os->nvram);
@@ -390,8 +385,8 @@ static void macio_newworld_init(Object *obj)
qdev_prop_allow_set_link_before_realize,
0, NULL);
object_initialize(&ns->gpio, sizeof(ns->gpio), TYPE_MACIO_GPIO);
qdev_set_parent_bus(DEVICE(&ns->gpio), sysbus_get_default());
sysbus_init_child_obj(obj, "gpio", &ns->gpio, sizeof(ns->gpio),
TYPE_MACIO_GPIO);
for (i = 0; i < 2; i++) {
macio_init_ide(s, &ns->ide[i], sizeof(ns->ide[i]), i);
@@ -404,13 +399,10 @@ static void macio_instance_init(Object *obj)
memory_region_init(&s->bar, obj, "macio", 0x80000);
object_initialize(&s->dbdma, sizeof(s->dbdma), TYPE_MAC_DBDMA);
qdev_set_parent_bus(DEVICE(&s->dbdma), sysbus_get_default());
object_property_add_child(obj, "dbdma", OBJECT(&s->dbdma), NULL);
sysbus_init_child_obj(obj, "dbdma", &s->dbdma, sizeof(s->dbdma),
TYPE_MAC_DBDMA);
object_initialize(&s->escc, sizeof(s->escc), TYPE_ESCC);
qdev_set_parent_bus(DEVICE(&s->escc), sysbus_get_default());
object_property_add_child(obj, "escc", OBJECT(&s->escc), NULL);
sysbus_init_child_obj(obj, "escc", &s->escc, sizeof(s->escc), TYPE_ESCC);
}
static const VMStateDescription vmstate_macio_oldworld = {
+2 -3
View File
@@ -770,9 +770,8 @@ static void pmu_init(Object *obj)
qdev_prop_allow_set_link_before_realize,
0, NULL);
object_initialize(&s->mos6522_pmu, sizeof(s->mos6522_pmu),
TYPE_MOS6522_PMU);
qdev_set_parent_bus(DEVICE(&s->mos6522_pmu), sysbus_get_default());
sysbus_init_child_obj(obj, "mos6522-pmu", &s->mos6522_pmu,
sizeof(s->mos6522_pmu), TYPE_MOS6522_PMU);
memory_region_init_io(&s->mem, obj, &mos6522_pmu_ops, s, "via-pmu",
0x2000);
+1 -1
View File
@@ -547,7 +547,7 @@ static void tz_mpc_realize(DeviceState *dev, Error **errp)
address_space_init(&s->blocked_io_as, &s->blocked_io,
"tz-mpc-blocked-io");
s->blk_lut = g_new(uint32_t, s->blk_max);
s->blk_lut = g_new0(uint32_t, s->blk_max);
}
static int tz_mpc_post_load(void *opaque, int version_id)
+2 -2
View File
@@ -174,7 +174,7 @@ static int ne2000_buffer_full(NE2000State *s)
ssize_t ne2000_receive(NetClientState *nc, const uint8_t *buf, size_t size_)
{
NE2000State *s = qemu_get_nic_opaque(nc);
int size = size_;
size_t size = size_;
uint8_t *p;
unsigned int total_len, next, avail, len, index, mcast_idx;
uint8_t buf1[60];
@@ -182,7 +182,7 @@ ssize_t ne2000_receive(NetClientState *nc, const uint8_t *buf, size_t size_)
{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
#if defined(DEBUG_NE2000)
printf("NE2000: received len=%d\n", size);
printf("NE2000: received len=%zu\n", size);
#endif
if (s->cmd & E8390_STOP || ne2000_buffer_full(s))
+2 -2
View File
@@ -988,14 +988,14 @@ ssize_t pcnet_receive(NetClientState *nc, const uint8_t *buf, size_t size_)
uint8_t buf1[60];
int remaining;
int crc_err = 0;
int size = size_;
size_t size = size_;
if (CSR_DRX(s) || CSR_STOP(s) || CSR_SPND(s) || !size ||
(CSR_LOOP(s) && !s->looptest)) {
return -1;
}
#ifdef PCNET_DEBUG
printf("pcnet_receive size=%d\n", size);
printf("pcnet_receive size=%zu\n", size);
#endif
/* if too small buffer, then expand it */
+4 -4
View File
@@ -817,7 +817,7 @@ static ssize_t rtl8139_do_receive(NetClientState *nc, const uint8_t *buf, size_t
RTL8139State *s = qemu_get_nic_opaque(nc);
PCIDevice *d = PCI_DEVICE(s);
/* size is the length of the buffer passed to the driver */
int size = size_;
size_t size = size_;
const uint8_t *dot1q_buf = NULL;
uint32_t packet_header = 0;
@@ -826,7 +826,7 @@ static ssize_t rtl8139_do_receive(NetClientState *nc, const uint8_t *buf, size_t
static const uint8_t broadcast_macaddr[6] =
{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
DPRINTF(">>> received len=%d\n", size);
DPRINTF(">>> received len=%zu\n", size);
/* test if board clock is stopped */
if (!s->clock_enabled)
@@ -1035,7 +1035,7 @@ static ssize_t rtl8139_do_receive(NetClientState *nc, const uint8_t *buf, size_t
if (size+4 > rx_space)
{
DPRINTF("C+ Rx mode : descriptor %d size %d received %d + 4\n",
DPRINTF("C+ Rx mode : descriptor %d size %d received %zu + 4\n",
descriptor, rx_space, size);
s->IntrStatus |= RxOverflow;
@@ -1148,7 +1148,7 @@ static ssize_t rtl8139_do_receive(NetClientState *nc, const uint8_t *buf, size_t
if (avail != 0 && RX_ALIGN(size + 8) >= avail)
{
DPRINTF("rx overflow: rx buffer length %d head 0x%04x "
"read 0x%04x === available 0x%04x need 0x%04x\n",
"read 0x%04x === available 0x%04x need 0x%04zx\n",
s->RxBufferSize, s->RxBufAddr, s->RxBufPtr, avail, size + 8);
s->IntrStatus |= RxOverflow;
+12
View File
@@ -345,6 +345,10 @@ void pcie_cap_slot_hotplug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
if (!dev->hotplugged) {
pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTSTA,
PCI_EXP_SLTSTA_PDS);
if (pci_dev->cap_present & QEMU_PCIE_LNKSTA_DLLLA) {
pci_word_test_and_set_mask(exp_cap + PCI_EXP_LNKSTA,
PCI_EXP_LNKSTA_DLLLA);
}
return;
}
@@ -355,6 +359,10 @@ void pcie_cap_slot_hotplug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
if (pci_get_function_0(pci_dev)) {
pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTSTA,
PCI_EXP_SLTSTA_PDS);
if (pci_dev->cap_present & QEMU_PCIE_LNKSTA_DLLLA) {
pci_word_test_and_set_mask(exp_cap + PCI_EXP_LNKSTA,
PCI_EXP_LNKSTA_DLLLA);
}
pcie_cap_slot_event(PCI_DEVICE(hotplug_dev),
PCI_EXP_HP_EV_PDC | PCI_EXP_HP_EV_ABP);
}
@@ -531,6 +539,10 @@ void pcie_cap_slot_write_config(PCIDevice *dev,
pci_word_test_and_clear_mask(exp_cap + PCI_EXP_SLTSTA,
PCI_EXP_SLTSTA_PDS);
if (dev->cap_present & QEMU_PCIE_LNKSTA_DLLLA) {
pci_word_test_and_clear_mask(exp_cap + PCI_EXP_LNKSTA,
PCI_EXP_LNKSTA_DLLLA);
}
pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTSTA,
PCI_EXP_SLTSTA_PDC);
}
+7 -1
View File
@@ -155,9 +155,15 @@ static void pnv_lpc_do_eccb(PnvLpcController *lpc, uint64_t cmd)
/* XXX Check for magic bits at the top, addr size etc... */
unsigned int sz = (cmd & ECCB_CTL_SZ_MASK) >> ECCB_CTL_SZ_LSH;
uint32_t opb_addr = cmd & ECCB_CTL_ADDR_MASK;
uint8_t data[4];
uint8_t data[8];
bool success;
if (sz > sizeof(data)) {
qemu_log_mask(LOG_GUEST_ERROR,
"ECCB: invalid operation at @0x%08x size %d\n", opb_addr, sz);
return;
}
if (cmd & ECCB_CTL_READ) {
success = opb_read(lpc, opb_addr, data, sz);
if (success) {
+8 -13
View File
@@ -57,7 +57,7 @@ typedef struct PPC440PCIXState {
struct PLBOutMap pom[PPC440_PCIX_NR_POMS];
struct PLBInMap pim[PPC440_PCIX_NR_PIMS];
uint32_t sts;
qemu_irq irq[PCI_NUM_PINS];
qemu_irq irq;
AddressSpace bm_as;
MemoryRegion bm;
@@ -418,21 +418,20 @@ static void ppc440_pcix_reset(DeviceState *dev)
* This may need further refactoring for other boards. */
static int ppc440_pcix_map_irq(PCIDevice *pci_dev, int irq_num)
{
int slot = pci_dev->devfn >> 3;
trace_ppc440_pcix_map_irq(pci_dev->devfn, irq_num, slot);
return slot - 1;
trace_ppc440_pcix_map_irq(pci_dev->devfn, irq_num, 0);
return 0;
}
static void ppc440_pcix_set_irq(void *opaque, int irq_num, int level)
{
qemu_irq *pci_irqs = opaque;
qemu_irq *pci_irq = opaque;
trace_ppc440_pcix_set_irq(irq_num);
if (irq_num < 0) {
error_report("%s: PCI irq %d", __func__, irq_num);
return;
}
qemu_set_irq(pci_irqs[irq_num], level);
qemu_set_irq(*pci_irq, level);
}
static AddressSpace *ppc440_pcix_set_iommu(PCIBus *b, void *opaque, int devfn)
@@ -471,19 +470,15 @@ static int ppc440_pcix_initfn(SysBusDevice *dev)
{
PPC440PCIXState *s;
PCIHostState *h;
int i;
h = PCI_HOST_BRIDGE(dev);
s = PPC440_PCIX_HOST_BRIDGE(dev);
for (i = 0; i < ARRAY_SIZE(s->irq); i++) {
sysbus_init_irq(dev, &s->irq[i]);
}
sysbus_init_irq(dev, &s->irq);
memory_region_init(&s->busmem, OBJECT(dev), "pci bus memory", UINT64_MAX);
h->bus = pci_register_root_bus(DEVICE(dev), NULL, ppc440_pcix_set_irq,
ppc440_pcix_map_irq, s->irq, &s->busmem,
get_system_io(), PCI_DEVFN(0, 0), 4, TYPE_PCI_BUS);
ppc440_pcix_map_irq, &s->irq, &s->busmem,
get_system_io(), PCI_DEVFN(0, 0), 1, TYPE_PCI_BUS);
s->dev = pci_create_simple(h->bus, PCI_DEVFN(0, 0), "ppc4xx-host-bridge");
+2 -4
View File
@@ -515,10 +515,8 @@ static void sam460ex_init(MachineState *machine)
/* PCI bus */
ppc460ex_pcie_init(env);
/* FIXME: is this correct? */
dev = sysbus_create_varargs("ppc440-pcix-host", 0xc0ec00000,
uic[1][0], uic[1][20], uic[1][21], uic[1][22],
NULL);
/* All PCI irqs are connected to the same UIC pin (cf. UBoot source) */
dev = sysbus_create_simple("ppc440-pcix-host", 0xc0ec00000, uic[1][0]);
pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci.0");
if (!pci_bus) {
error_report("couldn't create PCI controller!");
+32 -30
View File
@@ -113,26 +113,6 @@ const char *spapr_get_cpu_core_type(const char *cpu_type)
return object_class_get_name(oc);
}
static void spapr_unrealize_vcpu(PowerPCCPU *cpu)
{
qemu_unregister_reset(spapr_cpu_reset, cpu);
object_unparent(cpu->intc);
cpu_remove_sync(CPU(cpu));
object_unparent(OBJECT(cpu));
}
static void spapr_cpu_core_unrealize(DeviceState *dev, Error **errp)
{
sPAPRCPUCore *sc = SPAPR_CPU_CORE(OBJECT(dev));
CPUCore *cc = CPU_CORE(dev);
int i;
for (i = 0; i < cc->nr_threads; i++) {
spapr_unrealize_vcpu(sc->threads[i]);
}
g_free(sc->threads);
}
static bool slb_shadow_needed(void *opaque)
{
sPAPRCPUState *spapr_cpu = opaque;
@@ -207,10 +187,34 @@ static const VMStateDescription vmstate_spapr_cpu_state = {
}
};
static void spapr_unrealize_vcpu(PowerPCCPU *cpu, sPAPRCPUCore *sc)
{
if (!sc->pre_3_0_migration) {
vmstate_unregister(NULL, &vmstate_spapr_cpu_state, cpu->machine_data);
}
qemu_unregister_reset(spapr_cpu_reset, cpu);
object_unparent(cpu->intc);
cpu_remove_sync(CPU(cpu));
object_unparent(OBJECT(cpu));
}
static void spapr_cpu_core_unrealize(DeviceState *dev, Error **errp)
{
sPAPRCPUCore *sc = SPAPR_CPU_CORE(OBJECT(dev));
CPUCore *cc = CPU_CORE(dev);
int i;
for (i = 0; i < cc->nr_threads; i++) {
spapr_unrealize_vcpu(sc->threads[i], sc);
}
g_free(sc->threads);
}
static void spapr_realize_vcpu(PowerPCCPU *cpu, sPAPRMachineState *spapr,
Error **errp)
sPAPRCPUCore *sc, Error **errp)
{
CPUPPCState *env = &cpu->env;
CPUState *cs = CPU(cpu);
Error *local_err = NULL;
object_property_set_bool(OBJECT(cpu), true, "realized", &local_err);
@@ -233,6 +237,11 @@ static void spapr_realize_vcpu(PowerPCCPU *cpu, sPAPRMachineState *spapr,
goto error_unregister;
}
if (!sc->pre_3_0_migration) {
vmstate_register(NULL, cs->cpu_index, &vmstate_spapr_cpu_state,
cpu->machine_data);
}
return;
error_unregister:
@@ -272,10 +281,6 @@ static PowerPCCPU *spapr_create_vcpu(sPAPRCPUCore *sc, int i, Error **errp)
}
cpu->machine_data = g_new0(sPAPRCPUState, 1);
if (!sc->pre_3_0_migration) {
vmstate_register(NULL, cs->cpu_index, &vmstate_spapr_cpu_state,
cpu->machine_data);
}
object_unref(obj);
return cpu;
@@ -290,9 +295,6 @@ static void spapr_delete_vcpu(PowerPCCPU *cpu, sPAPRCPUCore *sc)
{
sPAPRCPUState *spapr_cpu = spapr_cpu_state(cpu);
if (!sc->pre_3_0_migration) {
vmstate_unregister(NULL, &vmstate_spapr_cpu_state, cpu->machine_data);
}
cpu->machine_data = NULL;
g_free(spapr_cpu);
object_unparent(OBJECT(cpu));
@@ -325,7 +327,7 @@ static void spapr_cpu_core_realize(DeviceState *dev, Error **errp)
}
for (j = 0; j < cc->nr_threads; j++) {
spapr_realize_vcpu(sc->threads[j], spapr, &local_err);
spapr_realize_vcpu(sc->threads[j], spapr, sc, &local_err);
if (local_err) {
goto err_unrealize;
}
@@ -334,7 +336,7 @@ static void spapr_cpu_core_realize(DeviceState *dev, Error **errp)
err_unrealize:
while (--j >= 0) {
spapr_unrealize_vcpu(sc->threads[j]);
spapr_unrealize_vcpu(sc->threads[j], sc);
}
err:
while (--i >= 0) {
+2 -2
View File
@@ -89,7 +89,7 @@ typedef struct RdmaRmPort {
enum ibv_port_state state;
} RdmaRmPort;
typedef struct RdmaDeviceResources {
struct RdmaDeviceResources {
RdmaRmPort ports[MAX_PORTS];
RdmaRmResTbl pd_tbl;
RdmaRmResTbl mr_tbl;
@@ -98,6 +98,6 @@ typedef struct RdmaDeviceResources {
RdmaRmResTbl cq_tbl;
RdmaRmResTbl cqe_ctx_tbl;
GHashTable *qp_hash; /* Keeps mapping between real and emulated */
} RdmaDeviceResources;
};
#endif
+1
View File
@@ -320,6 +320,7 @@ static void sclp_memory_init(SCLPDevice *sclp)
initial_mem = initial_mem >> increment_size << increment_size;
machine->ram_size = initial_mem;
machine->maxram_size = initial_mem;
/* let's propagate the changed ram size into the global variable. */
ram_size = initial_mem;
}
+17 -2
View File
@@ -865,10 +865,11 @@ static void lsi_do_status(LSIState *s)
static void lsi_do_msgin(LSIState *s)
{
int len;
uint8_t len;
DPRINTF("Message in len=%d/%d\n", s->dbc, s->msg_len);
s->sfbr = s->msg[0];
len = s->msg_len;
assert(len > 0 && len <= LSI_MAX_MSGIN_LEN);
if (len > s->dbc)
len = s->dbc;
pci_dma_write(PCI_DEVICE(s), s->dnad, s->msg, len);
@@ -1703,8 +1704,10 @@ static uint8_t lsi_reg_readb(LSIState *s, int offset)
break;
case 0x58: /* SBDL */
/* Some drivers peek at the data bus during the MSG IN phase. */
if ((s->sstat1 & PHASE_MASK) == PHASE_MI)
if ((s->sstat1 & PHASE_MASK) == PHASE_MI) {
assert(s->msg_len > 0);
return s->msg[0];
}
ret = 0;
break;
case 0x59: /* SBDL high */
@@ -2096,11 +2099,23 @@ static int lsi_pre_save(void *opaque)
return 0;
}
static int lsi_post_load(void *opaque, int version_id)
{
LSIState *s = opaque;
if (s->msg_len < 0 || s->msg_len > LSI_MAX_MSGIN_LEN) {
return -EINVAL;
}
return 0;
}
static const VMStateDescription vmstate_lsi_scsi = {
.name = "lsiscsi",
.version_id = 0,
.minimum_version_id = 0,
.pre_save = lsi_pre_save,
.post_load = lsi_post_load,
.fields = (VMStateField[]) {
VMSTATE_PCI_DEVICE(parent_obj, LSIState),
+1 -1
View File
@@ -183,7 +183,7 @@ static void vhost_scsi_realize(DeviceState *dev, Error **errp)
}
vsc->dev.nvqs = VHOST_SCSI_VQ_NUM_FIXED + vs->conf.num_queues;
vsc->dev.vqs = g_new(struct vhost_virtqueue, vsc->dev.nvqs);
vsc->dev.vqs = g_new0(struct vhost_virtqueue, vsc->dev.nvqs);
vsc->dev.vq_index = 0;
vsc->dev.backend_features = 0;
+1
View File
@@ -166,6 +166,7 @@ static int tpm_emulator_set_locality(TPMEmulator *tpm_emu, uint8_t locty_number,
trace_tpm_emulator_set_locality(locty_number);
memset(&loc, 0, sizeof(loc));
loc.u.req.loc = locty_number;
if (tpm_emulator_ctrlcmd(tpm_emu, CMD_SET_LOCALITY, &loc,
sizeof(loc), sizeof(loc)) < 0) {
+7 -3
View File
@@ -263,7 +263,9 @@ static void tpm_tis_prep_abort(TPMState *s, uint8_t locty, uint8_t newlocty)
{
uint8_t busy_locty;
s->aborting_locty = locty;
assert(TPM_TIS_IS_VALID_LOCTY(newlocty));
s->aborting_locty = locty; /* may also be TPM_TIS_NO_LOCALITY */
s->next_locty = newlocty; /* locality after successful abort */
/*
@@ -293,9 +295,11 @@ static void tpm_tis_request_completed(TPMIf *ti, int ret)
uint8_t locty = s->cmd.locty;
uint8_t l;
assert(TPM_TIS_IS_VALID_LOCTY(locty));
if (s->cmd.selftest_done) {
for (l = 0; l < TPM_TIS_NUM_LOCALITIES; l++) {
s->loc[locty].sts |= TPM_TIS_STS_SELFTEST_DONE;
s->loc[l].sts |= TPM_TIS_STS_SELFTEST_DONE;
}
}
@@ -616,7 +620,7 @@ static void tpm_tis_mmio_write(void *opaque, hwaddr addr,
}
/* cancel any seize by a lower locality */
for (l = 0; l < locty - 1; l++) {
for (l = 0; l < locty; l++) {
s->loc[l].access &= ~TPM_TIS_ACCESS_SEIZE;
}
+15 -4
View File
@@ -649,13 +649,18 @@ static void usb_mtp_object_readdir(MTPState *s, MTPObject *o)
{
struct dirent *entry;
DIR *dir;
int fd;
if (o->have_children) {
return;
}
o->have_children = true;
dir = opendir(o->path);
fd = open(o->path, O_DIRECTORY | O_CLOEXEC | O_NOFOLLOW);
if (fd < 0) {
return;
}
dir = fdopendir(fd);
if (!dir) {
return;
}
@@ -1003,7 +1008,7 @@ static MTPData *usb_mtp_get_object(MTPState *s, MTPControl *c,
trace_usb_mtp_op_get_object(s->dev.addr, o->handle, o->path);
d->fd = open(o->path, O_RDONLY);
d->fd = open(o->path, O_RDONLY | O_CLOEXEC | O_NOFOLLOW);
if (d->fd == -1) {
usb_mtp_data_free(d);
return NULL;
@@ -1027,7 +1032,7 @@ static MTPData *usb_mtp_get_partial_object(MTPState *s, MTPControl *c,
c->argv[1], c->argv[2]);
d = usb_mtp_data_alloc(c);
d->fd = open(o->path, O_RDONLY);
d->fd = open(o->path, O_RDONLY | O_CLOEXEC | O_NOFOLLOW);
if (d->fd == -1) {
usb_mtp_data_free(d);
return NULL;
@@ -1608,7 +1613,7 @@ static void usb_mtp_write_data(MTPState *s)
0, 0, 0, 0);
goto done;
}
d->fd = open(path, O_CREAT | O_WRONLY, mask);
d->fd = open(path, O_CREAT | O_WRONLY | O_CLOEXEC | O_NOFOLLOW, mask);
if (d->fd == -1) {
usb_mtp_queue_result(s, RES_STORE_FULL, d->trans,
0, 0, 0, 0);
@@ -1667,6 +1672,12 @@ static void usb_mtp_write_metadata(MTPState *s)
utf16_to_str(dataset->length, dataset->filename, filename);
if (strchr(filename, '/')) {
usb_mtp_queue_result(s, RES_PARAMETER_NOT_SUPPORTED, d->trans,
0, 0, 0, 0);
return;
}
o = usb_mtp_object_lookup_name(p, filename, dataset->length);
if (o != NULL) {
next_handle = o->handle;
+8 -12
View File
@@ -374,8 +374,6 @@ static int vhost_user_set_mem_table_postcopy(struct vhost_dev *dev,
int fds[VHOST_MEMORY_MAX_NREGIONS];
int i, fd;
size_t fd_num = 0;
bool reply_supported = virtio_has_feature(dev->protocol_features,
VHOST_USER_PROTOCOL_F_REPLY_ACK);
VhostUserMsg msg_reply;
int region_i, msg_i;
@@ -384,10 +382,6 @@ static int vhost_user_set_mem_table_postcopy(struct vhost_dev *dev,
.hdr.flags = VHOST_USER_VERSION,
};
if (reply_supported) {
msg.hdr.flags |= VHOST_USER_NEED_REPLY_MASK;
}
if (u->region_rb_len < dev->mem->nregions) {
u->region_rb = g_renew(RAMBlock*, u->region_rb, dev->mem->nregions);
u->region_rb_offset = g_renew(ram_addr_t, u->region_rb_offset,
@@ -503,10 +497,6 @@ static int vhost_user_set_mem_table_postcopy(struct vhost_dev *dev,
return -1;
}
if (reply_supported) {
return process_message_reply(dev, &msg);
}
return 0;
}
@@ -519,8 +509,7 @@ static int vhost_user_set_mem_table(struct vhost_dev *dev,
size_t fd_num = 0;
bool do_postcopy = u->postcopy_listen && u->postcopy_fd.handler;
bool reply_supported = virtio_has_feature(dev->protocol_features,
VHOST_USER_PROTOCOL_F_REPLY_ACK) &&
!do_postcopy;
VHOST_USER_PROTOCOL_F_REPLY_ACK);
if (do_postcopy) {
/* Postcopy has enough differences that it's best done in it's own
@@ -1291,6 +1280,7 @@ static int vhost_user_postcopy_end(struct vhost_dev *dev, Error **errp)
return ret;
}
postcopy_unregister_shared_ufd(&u->postcopy_fd);
close(u->postcopy_fd.fd);
u->postcopy_fd.handler = NULL;
trace_vhost_user_postcopy_end_exit();
@@ -1430,6 +1420,12 @@ static int vhost_user_backend_cleanup(struct vhost_dev *dev)
postcopy_remove_notifier(&u->postcopy_notifier);
u->postcopy_notifier.notify = NULL;
}
u->postcopy_listen = false;
if (u->postcopy_fd.handler) {
postcopy_unregister_shared_ufd(&u->postcopy_fd);
close(u->postcopy_fd.fd);
u->postcopy_fd.handler = NULL;
}
if (u->slave_fd >= 0) {
qemu_set_fd_handler(u->slave_fd, NULL, NULL, NULL);
close(u->slave_fd);
+4 -4
View File
@@ -663,12 +663,14 @@ static void vhost_iommu_region_add(MemoryListener *listener,
struct vhost_iommu *iommu;
Int128 end;
int iommu_idx;
IOMMUMemoryRegion *iommu_mr = IOMMU_MEMORY_REGION(section->mr);
IOMMUMemoryRegion *iommu_mr;
if (!memory_region_is_iommu(section->mr)) {
return;
}
iommu_mr = IOMMU_MEMORY_REGION(section->mr);
iommu = g_malloc0(sizeof(*iommu));
end = int128_add(int128_make64(section->offset_within_region),
section->size);
@@ -1071,10 +1073,8 @@ static void vhost_virtqueue_stop(struct vhost_dev *dev,
.index = vhost_vq_index,
};
int r;
int a;
a = virtio_queue_get_desc_addr(vdev, idx);
if (a == 0) {
if (virtio_queue_get_desc_addr(vdev, idx) == 0) {
/* Don't stop the virtqueue which might have not been started */
return;
}
+15 -2
View File
@@ -1604,6 +1604,8 @@ void virtio_del_queue(VirtIODevice *vdev, int n)
vdev->vq[n].vring.num = 0;
vdev->vq[n].vring.num_default = 0;
vdev->vq[n].handle_output = NULL;
vdev->vq[n].handle_aio_output = NULL;
}
static void virtio_set_isr(VirtIODevice *vdev, int value)
@@ -2006,14 +2008,25 @@ static int virtio_set_features_nocheck(VirtIODevice *vdev, uint64_t val)
int virtio_set_features(VirtIODevice *vdev, uint64_t val)
{
/*
int ret;
/*
* The driver must not attempt to set features after feature negotiation
* has finished.
*/
if (vdev->status & VIRTIO_CONFIG_S_FEATURES_OK) {
return -EINVAL;
}
return virtio_set_features_nocheck(vdev, val);
ret = virtio_set_features_nocheck(vdev, val);
if (!ret && virtio_vdev_has_feature(vdev, VIRTIO_RING_F_EVENT_IDX)) {
/* VIRTIO_RING_F_EVENT_IDX changes the size of the caches. */
int i;
for (i = 0; i < VIRTIO_QUEUE_MAX; i++) {
if (vdev->vq[i].vring.num != 0) {
virtio_init_region_cache(vdev, i);
}
}
}
return ret;
}
int virtio_load(VirtIODevice *vdev, QEMUFile *f, int version_id)
+6 -5
View File
@@ -43,11 +43,12 @@ typedef struct BlockFragInfo {
typedef enum {
BDRV_REQ_COPY_ON_READ = 0x1,
BDRV_REQ_ZERO_WRITE = 0x2,
/* The BDRV_REQ_MAY_UNMAP flag is used to indicate that the block driver
* is allowed to optimize a write zeroes request by unmapping (discarding)
* blocks if it is guaranteed that the result will read back as
* zeroes. The flag is only passed to the driver if the block device is
* opened with BDRV_O_UNMAP.
/*
* The BDRV_REQ_MAY_UNMAP flag is used in write_zeroes requests to indicate
* that the block driver should unmap (discard) blocks if it is guaranteed
* that the result will read back as zeroes. The flag is only passed to the
* driver if the block device is opened with BDRV_O_UNMAP.
*/
BDRV_REQ_MAY_UNMAP = 0x4,
+3 -1
View File
@@ -135,7 +135,9 @@ typedef struct NBDExtent {
#define NBD_FLAG_SEND_TRIM (1 << 5) /* Send TRIM (discard) */
#define NBD_FLAG_SEND_WRITE_ZEROES (1 << 6) /* Send WRITE_ZEROES */
#define NBD_FLAG_SEND_DF (1 << 7) /* Send DF (Do not Fragment) */
#define NBD_FLAG_SEND_CACHE (1 << 8) /* Send CACHE (prefetch) */
#define NBD_FLAG_CAN_MULTI_CONN (1 << 8) /* Multi-client cache consistent */
#define NBD_FLAG_SEND_RESIZE (1 << 9) /* Send resize */
#define NBD_FLAG_SEND_CACHE (1 << 10) /* Send CACHE (prefetch) */
/* New-style handshake (global) flags, sent from server to client, and
control what will happen during handshake phase. */
+2
View File
@@ -82,6 +82,8 @@ int i2c_recv(I2CBus *bus);
DeviceState *i2c_create_slave(I2CBus *bus, const char *name, uint8_t addr);
typedef struct bitbang_i2c_interface bitbang_i2c_interface;
/* lm832x.c */
void lm832x_key_event(DeviceState *dev, int key, int state);
-3
View File
@@ -31,9 +31,6 @@
#include "hw/sysbus.h"
#include "hw/i2c/i2c.h"
/* from hw/i2c/bitbang_i2c.h */
typedef struct bitbang_i2c_interface bitbang_i2c_interface;
#define TYPE_PPC4xx_I2C "ppc4xx-i2c"
#define PPC4xx_I2C(obj) OBJECT_CHECK(PPC4xxI2CState, (obj), TYPE_PPC4xx_I2C)
+4
View File
@@ -317,6 +317,10 @@ bool e820_get_entry(int, uint32_t, uint64_t *, uint64_t *);
#define PC_COMPAT_2_11 \
HW_COMPAT_2_11 \
{\
.driver = TYPE_X86_CPU,\
.property = "x-migrate-smi-count",\
.value = "off",\
},{\
.driver = "Skylake-Server" "-" TYPE_X86_CPU,\
.property = "clflushopt",\
.value = "off",\
+1 -1
View File
@@ -50,7 +50,7 @@ typedef struct S390TODClass {
/* Converts ns to s390's clock format */
static inline uint64_t time2tod(uint64_t ns)
{
return (ns << 9) / 125 + (((ns & 0xff10000000000000ull) / 125) << 9);
return (ns << 9) / 125 + (((ns & 0xff80000000000000ull) / 125) << 9);
}
/* Converts s390's clock format to ns */
+1
View File
@@ -125,6 +125,7 @@ typedef struct VirtIOGPU {
uint32_t bytes_3d;
} stats;
void (*disable_scanout)(struct VirtIOGPU *g, int scanout_id);
Error *migration_blocker;
} VirtIOGPU;
-6
View File
@@ -169,12 +169,6 @@ void qemu_check_nic_model(NICInfo *nd, const char *model);
int qemu_find_nic_model(NICInfo *nd, const char * const *models,
const char *default_model);
ssize_t qemu_deliver_packet_iov(NetClientState *sender,
unsigned flags,
const struct iovec *iov,
int iovcnt,
void *opaque);
void print_net_client(Monitor *mon, NetClientState *nc);
void hmp_info_network(Monitor *mon, const QDict *qdict);
void net_socket_rs_init(SocketReadState *rs,
+1 -1
View File
@@ -24,7 +24,7 @@ struct QString {
QString *qstring_new(void);
QString *qstring_from_str(const char *str);
QString *qstring_from_substr(const char *str, int start, int end);
QString *qstring_from_substr(const char *str, size_t start, size_t end);
size_t qstring_get_length(const QString *qstring);
const char *qstring_get_str(const QString *qstring);
const char *qstring_get_try_str(const QString *qstring);
+6 -14
View File
@@ -136,21 +136,13 @@ static void job_txn_del_job(Job *job)
}
}
static int job_txn_apply(JobTxn *txn, int fn(Job *), bool lock)
static int job_txn_apply(JobTxn *txn, int fn(Job *))
{
AioContext *ctx;
Job *job, *next;
int rc = 0;
QLIST_FOREACH_SAFE(job, &txn->jobs, txn_list, next) {
if (lock) {
ctx = job->aio_context;
aio_context_acquire(ctx);
}
rc = fn(job);
if (lock) {
aio_context_release(ctx);
}
if (rc) {
break;
}
@@ -732,10 +724,10 @@ static void job_cancel_async(Job *job, bool force)
{
if (job->user_paused) {
/* Do not call job_enter here, the caller will handle it. */
job->user_paused = false;
if (job->driver->user_resume) {
job->driver->user_resume(job);
}
job->user_paused = false;
assert(job->pause_count > 0);
job->pause_count--;
}
@@ -807,11 +799,11 @@ static void job_do_finalize(Job *job)
assert(job && job->txn);
/* prepare the transaction to complete */
rc = job_txn_apply(job->txn, job_prepare, true);
rc = job_txn_apply(job->txn, job_prepare);
if (rc) {
job_completed_txn_abort(job);
} else {
job_txn_apply(job->txn, job_finalize_single, true);
job_txn_apply(job->txn, job_finalize_single);
}
}
@@ -857,10 +849,10 @@ static void job_completed_txn_success(Job *job)
assert(other_job->ret == 0);
}
job_txn_apply(txn, job_transition_to_pending, false);
job_txn_apply(txn, job_transition_to_pending);
/* If no jobs need manual finalization, automatically do so */
if (job_txn_apply(txn, job_needs_finalize, false) == 0) {
if (job_txn_apply(txn, job_needs_finalize) == 0) {
job_do_finalize(job);
}
}
+6 -2
View File
@@ -49,7 +49,9 @@ safe_syscall_base:
* and returns the result in r3
* Shuffle everything around appropriately.
*/
mr 11, 3 /* signal_pending */
std 14, 16(1) /* Preserve r14 in SP+16 */
.cfi_offset 14, 16
mr 14, 3 /* signal_pending */
mr 0, 4 /* syscall number */
mr 3, 5 /* syscall arguments */
mr 4, 6
@@ -67,12 +69,13 @@ safe_syscall_base:
*/
safe_syscall_start:
/* if signal_pending is non-zero, don't do the call */
lwz 12, 0(11)
lwz 12, 0(14)
cmpwi 0, 12, 0
bne- 0f
sc
safe_syscall_end:
/* code path when we did execute the syscall */
ld 14, 16(1) /* restore r14 to its original value */
bnslr+
/* syscall failed; return negative errno */
@@ -81,6 +84,7 @@ safe_syscall_end:
/* code path when we didn't execute the syscall */
0: addi 3, 0, -TARGET_ERESTARTSYS
ld 14, 16(1) /* restore r14 to its orginal value */
blr
.cfi_endproc
+12 -3
View File
@@ -391,14 +391,23 @@ abi_long target_mmap(abi_ulong start, abi_ulong len, int prot,
}
#endif
if (!len) {
errno = EINVAL;
goto fail;
}
/* Also check for overflows... */
len = TARGET_PAGE_ALIGN(len);
if (!len) {
errno = ENOMEM;
goto fail;
}
if (offset & ~TARGET_PAGE_MASK) {
errno = EINVAL;
goto fail;
}
len = TARGET_PAGE_ALIGN(len);
if (len == 0)
goto the_end;
real_start = start & qemu_host_page_mask;
host_offset = offset & qemu_host_page_mask;
+34 -10
View File
@@ -8077,6 +8077,9 @@ abi_long do_syscall(void *cpu_env, int num, abi_long arg1,
}
break;
case TARGET_NR_write:
if (arg2 == 0 && arg3 == 0) {
return get_errno(safe_write(arg1, 0, 0));
}
if (!(p = lock_user(VERIFY_READ, arg2, arg3, 1)))
goto efault;
if (fd_trans_target_to_host_data(arg1)) {
@@ -10848,15 +10851,22 @@ abi_long do_syscall(void *cpu_env, int num, abi_long arg1,
#endif
#ifdef TARGET_AARCH64
case TARGET_PR_SVE_SET_VL:
/* We cannot support either PR_SVE_SET_VL_ONEXEC
or PR_SVE_VL_INHERIT. Therefore, anything above
ARM_MAX_VQ results in EINVAL. */
/*
* We cannot support either PR_SVE_SET_VL_ONEXEC or
* PR_SVE_VL_INHERIT. Note the kernel definition
* of sve_vl_valid allows for VQ=512, i.e. VL=8192,
* even though the current architectural maximum is VQ=16.
*/
ret = -TARGET_EINVAL;
if (arm_feature(cpu_env, ARM_FEATURE_SVE)
&& arg2 >= 0 && arg2 <= ARM_MAX_VQ * 16 && !(arg2 & 15)) {
&& arg2 >= 0 && arg2 <= 512 * 16 && !(arg2 & 15)) {
CPUARMState *env = cpu_env;
int old_vq = (env->vfp.zcr_el[1] & 0xf) + 1;
int vq = MAX(arg2 / 16, 1);
ARMCPU *cpu = arm_env_get_cpu(env);
uint32_t vq, old_vq;
old_vq = (env->vfp.zcr_el[1] & 0xf) + 1;
vq = MAX(arg2 / 16, 1);
vq = MIN(vq, cpu->sve_max_vq);
if (vq < old_vq) {
aarch64_sve_narrow_vq(env, vq);
@@ -10900,8 +10910,15 @@ abi_long do_syscall(void *cpu_env, int num, abi_long arg1,
arg4 = arg5;
arg5 = arg6;
}
if (!(p = lock_user(VERIFY_WRITE, arg2, arg3, 0)))
goto efault;
if (arg2 == 0 && arg3 == 0) {
/* Special-case NULL buffer and zero length, which should succeed */
p = 0;
} else {
p = lock_user(VERIFY_WRITE, arg2, arg3, 0);
if (!p) {
goto efault;
}
}
ret = get_errno(pread64(arg1, p, arg3, target_offset64(arg4, arg5)));
unlock_user(p, arg2, ret);
break;
@@ -10910,8 +10927,15 @@ abi_long do_syscall(void *cpu_env, int num, abi_long arg1,
arg4 = arg5;
arg5 = arg6;
}
if (!(p = lock_user(VERIFY_READ, arg2, arg3, 1)))
goto efault;
if (arg2 == 0 && arg3 == 0) {
/* Special-case NULL buffer and zero length, which should succeed */
p = 0;
} else {
p = lock_user(VERIFY_READ, arg2, arg3, 1);
if (!p) {
goto efault;
}
}
ret = get_errno(pwrite64(arg1, p, arg3, target_offset64(arg4, arg5)));
unlock_user(p, arg2, 0);
break;
+6 -5
View File
@@ -519,6 +519,12 @@ int postcopy_ram_incoming_cleanup(MigrationIncomingState *mis)
if (mis->have_fault_thread) {
Error *local_err = NULL;
/* Let the fault thread quit */
atomic_set(&mis->fault_thread_quit, 1);
postcopy_fault_thread_notify(mis);
trace_postcopy_ram_incoming_cleanup_join();
qemu_thread_join(&mis->fault_thread);
if (postcopy_notify(POSTCOPY_NOTIFY_INBOUND_END, &local_err)) {
error_report_err(local_err);
return -1;
@@ -527,11 +533,6 @@ int postcopy_ram_incoming_cleanup(MigrationIncomingState *mis)
if (qemu_ram_foreach_migratable_block(cleanup_range, mis)) {
return -1;
}
/* Let the fault thread quit */
atomic_set(&mis->fault_thread_quit, 1);
postcopy_fault_thread_notify(mis);
trace_postcopy_ram_incoming_cleanup_join();
qemu_thread_join(&mis->fault_thread);
trace_postcopy_ram_incoming_cleanup_closeuf();
close(mis->userfault_fd);
+45 -1
View File
@@ -633,7 +633,7 @@ static void monitor_qapi_event_handler(void *opaque);
* applying any rate limiting if required.
*/
static void
monitor_qapi_event_queue(QAPIEvent event, QDict *qdict, Error **errp)
monitor_qapi_event_queue_no_reenter(QAPIEvent event, QDict *qdict)
{
MonitorQAPIEventConf *evconf;
MonitorQAPIEventState *evstate;
@@ -688,6 +688,48 @@ monitor_qapi_event_queue(QAPIEvent event, QDict *qdict, Error **errp)
qemu_mutex_unlock(&monitor_lock);
}
static void
monitor_qapi_event_queue(QAPIEvent event, QDict *qdict, Error **errp)
{
/*
* monitor_qapi_event_queue_no_reenter() is not reentrant: it
* would deadlock on monitor_lock. Work around by queueing
* events in thread-local storage.
* TODO: remove this, make it re-enter safe.
*/
typedef struct MonitorQapiEvent {
QAPIEvent event;
QDict *qdict;
QSIMPLEQ_ENTRY(MonitorQapiEvent) entry;
} MonitorQapiEvent;
static __thread QSIMPLEQ_HEAD(, MonitorQapiEvent) event_queue;
static __thread bool reentered;
MonitorQapiEvent *ev;
if (!reentered) {
QSIMPLEQ_INIT(&event_queue);
}
ev = g_new(MonitorQapiEvent, 1);
ev->qdict = qobject_ref(qdict);
ev->event = event;
QSIMPLEQ_INSERT_TAIL(&event_queue, ev, entry);
if (reentered) {
return;
}
reentered = true;
while ((ev = QSIMPLEQ_FIRST(&event_queue)) != NULL) {
QSIMPLEQ_REMOVE_HEAD(&event_queue, entry);
monitor_qapi_event_queue_no_reenter(ev->event, ev->qdict);
qobject_unref(ev->qdict);
g_free(ev);
}
reentered = false;
}
/*
* This function runs evconf->rate ns after sending a throttled
* event.
@@ -4235,6 +4277,8 @@ static void handle_qmp_command(JSONMessageParser *parser, GQueue *tokens)
trace_monitor_qmp_cmd_out_of_band(qobject_get_try_str(id)
?: "");
monitor_qmp_dispatch(mon, req, id);
qobject_unref(req);
qobject_unref(id);
return;
}
+7 -2
View File
@@ -978,6 +978,7 @@ static int nbd_negotiate_meta_queries(NBDClient *client,
if (client->opt == NBD_OPT_LIST_META_CONTEXT && !nb_queries) {
/* enable all known contexts */
meta->base_allocation = true;
meta->bitmap = !!meta->exp->export_bitmap;
} else {
for (i = 0; i < nb_queries; ++i) {
ret = nbd_negotiate_meta_query(client, meta, errp);
@@ -1951,6 +1952,8 @@ static unsigned int bitmap_to_extents(BdrvDirtyBitmap *bitmap, uint64_t offset,
assert(begin < overall_end && nb_extents);
while (begin < overall_end && i < nb_extents) {
bool next_dirty = !dirty;
if (dirty) {
end = bdrv_dirty_bitmap_next_zero(bitmap, begin);
} else {
@@ -1962,6 +1965,7 @@ static unsigned int bitmap_to_extents(BdrvDirtyBitmap *bitmap, uint64_t offset,
end = MIN(bdrv_dirty_bitmap_size(bitmap),
begin + UINT32_MAX + 1 -
bdrv_dirty_bitmap_granularity(bitmap));
next_dirty = dirty;
}
if (dont_fragment && end > overall_end) {
end = overall_end;
@@ -1971,7 +1975,7 @@ static unsigned int bitmap_to_extents(BdrvDirtyBitmap *bitmap, uint64_t offset,
extents[i].flags = cpu_to_be32(dirty ? NBD_STATE_DIRTY : 0);
i++;
begin = end;
dirty = !dirty;
dirty = next_dirty;
}
bdrv_dirty_iter_free(it);
@@ -2135,7 +2139,8 @@ static coroutine_fn int nbd_do_cmd_read(NBDClient *client, NBDRequest *request,
}
if (client->structured_reply && !(request->flags & NBD_CMD_FLAG_DF) &&
request->len) {
request->len && request->type != NBD_CMD_CACHE)
{
return nbd_co_send_sparse_read(client, request->handle, request->from,
data, request->len, errp);
}
+17 -6
View File
@@ -231,6 +231,11 @@ static void qemu_net_client_destructor(NetClientState *nc)
{
g_free(nc);
}
static ssize_t qemu_deliver_packet_iov(NetClientState *sender,
unsigned flags,
const struct iovec *iov,
int iovcnt,
void *opaque);
static void qemu_net_client_setup(NetClientState *nc,
NetClientInfo *info,
@@ -705,15 +710,16 @@ static ssize_t nc_sendv_compat(NetClientState *nc, const struct iovec *iov,
return ret;
}
ssize_t qemu_deliver_packet_iov(NetClientState *sender,
unsigned flags,
const struct iovec *iov,
int iovcnt,
void *opaque)
static ssize_t qemu_deliver_packet_iov(NetClientState *sender,
unsigned flags,
const struct iovec *iov,
int iovcnt,
void *opaque)
{
NetClientState *nc = opaque;
int ret;
if (nc->link_down) {
return iov_size(iov, iovcnt);
}
@@ -740,10 +746,15 @@ ssize_t qemu_sendv_packet_async(NetClientState *sender,
NetPacketSent *sent_cb)
{
NetQueue *queue;
size_t size = iov_size(iov, iovcnt);
int ret;
if (size > NET_BUFSIZE) {
return size;
}
if (sender->link_down || !sender->peer) {
return iov_size(iov, iovcnt);
return size;
}
/* Let filters handle the packet first */
+9
View File
@@ -365,6 +365,15 @@ static int net_slirp_init(NetClientState *peer, const char *model,
return -1;
}
if (vdomainname && strlen(vdomainname) > 255) {
error_setg(errp, "'domainname' parameter cannot exceed 255 bytes");
return -1;
}
if (vhostname && strlen(vhostname) > 255) {
error_setg(errp, "'vhostname' parameter cannot exceed 255 bytes");
return -1;
}
nc = qemu_new_net_client(&net_slirp_info, peer, model, name);
+10 -4
View File
@@ -866,6 +866,9 @@
#
# @node-name: The node name of the device. (Since 2.3)
#
# @qdev: The qdev ID, or if no ID is assigned, the QOM path of the block
# device. (since 3.0)
#
# @stats: A @BlockDeviceStats for the device.
#
# @parent: This describes the file block device if it has one.
@@ -879,7 +882,7 @@
# Since: 0.14.0
##
{ 'struct': 'BlockStats',
'data': {'*device': 'str', '*node-name': 'str',
'data': {'*device': 'str', '*qdev': 'str', '*node-name': 'str',
'stats': 'BlockDeviceStats',
'*parent': 'BlockStats',
'*backing': 'BlockStats'} }
@@ -941,7 +944,8 @@
# "idle_time_ns":2953431879,
# "account_invalid":true,
# "account_failed":false
# }
# },
# "qdev": "/machine/unattached/device[23]"
# },
# {
# "device":"ide1-cd0",
@@ -959,7 +963,8 @@
# "wr_merged":0,
# "account_invalid":false,
# "account_failed":false
# }
# },
# "qdev": "/machine/unattached/device[24]"
# },
# {
# "device":"floppy0",
@@ -977,7 +982,8 @@
# "wr_merged":0,
# "account_invalid":false,
# "account_failed":false
# }
# },
# "qdev": "/machine/unattached/device[16]"
# },
# {
# "device":"sd0",
+15
View File
@@ -227,6 +227,21 @@ from old QEMU versions anymore. A newer machine type should be used instead.
In order to prevent QEMU from automatically opening an image's backing
chain, use ``"backing": null'' instead.
@subsubsection rbd keyvalue pair encoded filenames: "" (since 3.1.0)
Options for ``rbd'' should be specified according to its runtime options,
like other block drivers. Legacy parsing of keyvalue pair encoded
filenames is useful to open images with the old format for backing files;
These image files should be updated to use the current format.
Example of legacy encoding:
@code{json:@{"file.driver":"rbd", "file.filename":"rbd:rbd/name"@}}
The above, converted to the current supported format:
@code{json:@{"file.driver":"rbd", "file.pool":"rbd", "file.image":"name"@}}
@subsection vio-spapr-device device options
@subsubsection "irq": "" (since 3.0.0)
+1 -1
View File
@@ -44,7 +44,7 @@ STEXI
ETEXI
DEF("convert", img_convert,
"convert [--object objectdef] [--image-opts] [--target-image-opts] [-U] [-c] [-p] [-q] [-n] [-f fmt] [-t cache] [-T src_cache] [-O output_fmt] [-B backing_file] [-o options] [-l snapshot_param] [-S sparse_size] [-m num_coroutines] [-W] filename [filename2 [...]] output_filename")
"convert [--object objectdef] [--image-opts] [--target-image-opts] [-U] [-C] [-c] [-p] [-q] [-n] [-f fmt] [-t cache] [-T src_cache] [-O output_fmt] [-B backing_file] [-o options] [-l snapshot_param] [-S sparse_size] [-m num_coroutines] [-W] filename [filename2 [...]] output_filename")
STEXI
@item convert [--object @var{objectdef}] [--image-opts] [--target-image-opts] [-U] [-c] [-p] [-q] [-n] [-f @var{fmt}] [-t @var{cache}] [-T @var{src_cache}] [-O @var{output_fmt}] [-B @var{backing_file}] [-o @var{options}] [-l @var{snapshot_param}] [-S @var{sparse_size}] [-m @var{num_coroutines}] [-W] @var{filename} [@var{filename2} [...]] @var{output_filename}
ETEXI
+34 -22
View File
@@ -261,8 +261,9 @@ static int print_block_option_help(const char *filename, const char *fmt)
return 1;
}
if (!proto_drv->create_opts) {
error_report("Protocal driver '%s' does not support image creation",
error_report("Protocol driver '%s' does not support image creation",
proto_drv->format_name);
qemu_opts_free(create_opts);
return 1;
}
create_opts = qemu_opts_append(create_opts, proto_drv->create_opts);
@@ -345,21 +346,6 @@ static int img_add_key_secrets(void *opaque,
return 0;
}
static BlockBackend *img_open_new_file(const char *filename,
QemuOpts *create_opts,
const char *fmt, int flags,
bool writethrough, bool quiet,
bool force_share)
{
QDict *options = NULL;
options = qdict_new();
qemu_opt_foreach(create_opts, img_add_key_secrets, options, &error_abort);
return img_open_file(filename, options, fmt, flags, writethrough, quiet,
force_share);
}
static BlockBackend *img_open(bool image_opts,
const char *filename,
@@ -2018,17 +2004,19 @@ static int img_convert(int argc, char **argv)
BlockDriverState *out_bs;
QemuOpts *opts = NULL, *sn_opts = NULL;
QemuOptsList *create_opts = NULL;
QDict *open_opts = NULL;
char *options = NULL;
Error *local_err = NULL;
bool writethrough, src_writethrough, quiet = false, image_opts = false,
skip_create = false, progress = false, tgt_image_opts = false;
int64_t ret = -EINVAL;
bool force_share = false;
bool explict_min_sparse = false;
ImgConvertState s = (ImgConvertState) {
/* Need at least 4k of zeros for sparse detection */
.min_sparse = 8,
.copy_range = true,
.copy_range = false,
.buf_sectors = IO_BUF_SIZE / BDRV_SECTOR_SIZE,
.wr_in_order = true,
.num_coroutines = 8,
@@ -2043,7 +2031,7 @@ static int img_convert(int argc, char **argv)
{"target-image-opts", no_argument, 0, OPTION_TARGET_IMAGE_OPTS},
{0, 0, 0, 0}
};
c = getopt_long(argc, argv, ":hf:O:B:co:l:S:pt:T:qnm:WU",
c = getopt_long(argc, argv, ":hf:O:B:Cco:l:S:pt:T:qnm:WU",
long_options, NULL);
if (c == -1) {
break;
@@ -2067,9 +2055,11 @@ static int img_convert(int argc, char **argv)
case 'B':
out_baseimg = optarg;
break;
case 'C':
s.copy_range = true;
break;
case 'c':
s.compressed = true;
s.copy_range = false;
break;
case 'o':
if (!is_valid_option_list(optarg)) {
@@ -2112,7 +2102,7 @@ static int img_convert(int argc, char **argv)
}
s.min_sparse = sval / BDRV_SECTOR_SIZE;
s.copy_range = false;
explict_min_sparse = true;
break;
}
case 'p':
@@ -2172,6 +2162,16 @@ static int img_convert(int argc, char **argv)
goto fail_getopt;
}
if (s.compressed && s.copy_range) {
error_report("Cannot enable copy offloading when -c is used");
goto fail_getopt;
}
if (explict_min_sparse && s.copy_range) {
error_report("Cannot enable copy offloading when -S is used");
goto fail_getopt;
}
if (tgt_image_opts && !skip_create) {
error_report("--target-image-opts requires use of -n flag");
goto fail_getopt;
@@ -2349,6 +2349,16 @@ static int img_convert(int argc, char **argv)
}
}
/*
* The later open call will need any decryption secrets, and
* bdrv_create() will purge "opts", so extract them now before
* they are lost.
*/
if (!skip_create) {
open_opts = qdict_new();
qemu_opt_foreach(opts, img_add_key_secrets, open_opts, &error_abort);
}
if (!skip_create) {
/* Create the new image */
ret = bdrv_create(drv, out_filename, opts, &local_err);
@@ -2375,8 +2385,9 @@ static int img_convert(int argc, char **argv)
* That has to wait for bdrv_create to be improved
* to allow filenames in option syntax
*/
s.target = img_open_new_file(out_filename, opts, out_fmt,
flags, writethrough, quiet, false);
s.target = img_open_file(out_filename, open_opts, out_fmt,
flags, writethrough, quiet, false);
open_opts = NULL; /* blk_new_open will have freed it */
}
if (!s.target) {
ret = -1;
@@ -2451,6 +2462,7 @@ out:
qemu_opts_del(opts);
qemu_opts_free(create_opts);
qemu_opts_del(sn_opts);
qobject_unref(open_opts);
blk_unref(s.target);
if (s.src) {
for (bs_i = 0; bs_i < s.src_num; bs_i++) {
+9 -5
View File
@@ -96,8 +96,7 @@ will enumerate information about backing files in a disk image chain. Refer
below for further description.
@item -c
indicates that target image must be compressed (qcow format only). If this
option is used, copy offloading will not be attempted.
indicates that target image must be compressed (qcow format only)
@item -h
with or without a command shows help and lists the supported formats
@@ -116,8 +115,7 @@ in case both @var{-q} and @var{-p} options are used.
indicates the consecutive number of bytes that must contain only zeros
for qemu-img to create a sparse image during conversion. This value is rounded
down to the nearest 512 bytes. You may use the common size suffixes like
@code{k} for kilobytes. If this option is used, copy offloading will not be
attempted.
@code{k} for kilobytes.
@item -t @var{cache}
specifies the cache mode that should be used with the (destination) file. See
@@ -171,6 +169,12 @@ Number of parallel coroutines for the convert process
Allow out-of-order writes to the destination. This option improves performance,
but is only recommended for preallocated devices like host devices or other
raw block devices.
@item -C
Try to use copy offloading to move data from source image to target. This may
improve performance if the data is remote, such as with NFS or iSCSI backends,
but will not automatically sparsify zero sectors, and may result in a fully
allocated target image depending on the host support for getting allocation
information.
@end table
Parameters to dd subcommand:
@@ -321,7 +325,7 @@ Error on reading data
@end table
@item convert [--object @var{objectdef}] [--image-opts] [--target-image-opts] [-U] [-c] [-p] [-q] [-n] [-f @var{fmt}] [-t @var{cache}] [-T @var{src_cache}] [-O @var{output_fmt}] [-B @var{backing_file}] [-o @var{options}] [-l @var{snapshot_param}] [-S @var{sparse_size}] [-m @var{num_coroutines}] [-W] @var{filename} [@var{filename2} [...]] @var{output_filename}
@item convert [--object @var{objectdef}] [--image-opts] [--target-image-opts] [-U] [-C] [-c] [-p] [-q] [-n] [-f @var{fmt}] [-t @var{cache}] [-T @var{src_cache}] [-O @var{output_fmt}] [-B @var{backing_file}] [-o @var{options}] [-l @var{snapshot_param}] [-S @var{sparse_size}] [-m @var{num_coroutines}] [-W] @var{filename} [@var{filename2} [...]] @var{output_filename}
Convert the disk image @var{filename} or a snapshot @var{snapshot_param}
to disk image @var{output_filename} using format @var{output_fmt}. It can be optionally compressed (@code{-c}
+35 -1
View File
@@ -20,6 +20,7 @@
#include <sys/prctl.h>
#include <seccomp.h>
#include "sysemu/seccomp.h"
#include <linux/seccomp.h>
/* For some architectures (notably ARM) cacheflush is not supported until
* libseccomp 2.2.3, but configure enforces that we are using a more recent
@@ -107,12 +108,40 @@ static const struct QemuSeccompSyscall blacklist[] = {
{ SCMP_SYS(sched_get_priority_min), QEMU_SECCOMP_SET_RESOURCECTL },
};
static inline __attribute__((unused)) int
qemu_seccomp(unsigned int operation, unsigned int flags, void *args)
{
#ifdef __NR_seccomp
return syscall(__NR_seccomp, operation, flags, args);
#else
errno = ENOSYS;
return -1;
#endif
}
static uint32_t qemu_seccomp_get_kill_action(void)
{
#if defined(SECCOMP_GET_ACTION_AVAIL) && defined(SCMP_ACT_KILL_PROCESS) && \
defined(SECCOMP_RET_KILL_PROCESS)
{
uint32_t action = SECCOMP_RET_KILL_PROCESS;
if (qemu_seccomp(SECCOMP_GET_ACTION_AVAIL, 0, &action) == 0) {
return SCMP_ACT_KILL_PROCESS;
}
}
#endif
return SCMP_ACT_TRAP;
}
static int seccomp_start(uint32_t seccomp_opts)
{
int rc = 0;
unsigned int i = 0;
scmp_filter_ctx ctx;
uint32_t action = qemu_seccomp_get_kill_action();
ctx = seccomp_init(SCMP_ACT_ALLOW);
if (ctx == NULL) {
@@ -120,12 +149,17 @@ static int seccomp_start(uint32_t seccomp_opts)
goto seccomp_return;
}
rc = seccomp_attr_set(ctx, SCMP_FLTATR_CTL_TSYNC, 1);
if (rc != 0) {
goto seccomp_return;
}
for (i = 0; i < ARRAY_SIZE(blacklist); i++) {
if (!(seccomp_opts & blacklist[i].set)) {
continue;
}
rc = seccomp_rule_add_array(ctx, SCMP_ACT_KILL, blacklist[i].num,
rc = seccomp_rule_add_array(ctx, action, blacklist[i].num,
blacklist[i].narg, blacklist[i].arg_cmp);
if (rc < 0) {
goto seccomp_return;
+14 -11
View File
@@ -532,12 +532,12 @@
#
# Suspend guest to disk.
#
# This command tries to execute the scripts provided by the pm-utils package.
# If it's not available, the suspend operation will be performed by manually
# writing to a sysfs file.
# This command attempts to suspend the guest using three strategies, in this
# order:
#
# For the best results it's strongly recommended to have the pm-utils
# package installed in the guest.
# - systemd hibernate
# - pm-utils (via pm-hibernate)
# - manual write into sysfs
#
# This command does NOT return a response on success. There is a high chance
# the command succeeded if the VM exits with a zero exit status or, when
@@ -560,12 +560,12 @@
#
# Suspend guest to ram.
#
# This command tries to execute the scripts provided by the pm-utils package.
# If it's not available, the suspend operation will be performed by manually
# writing to a sysfs file.
# This command attempts to suspend the guest using three strategies, in this
# order:
#
# For the best results it's strongly recommended to have the pm-utils
# package installed in the guest.
# - systemd suspend
# - pm-utils (via pm-suspend)
# - manual write into sysfs
#
# IMPORTANT: guest-suspend-ram requires QEMU to support the 'system_wakeup'
# command. Thus, it's *required* to query QEMU for the presence of the
@@ -592,7 +592,10 @@
#
# Save guest state to disk and suspend to ram.
#
# This command requires the pm-utils package to be installed in the guest.
# This command attempts to suspend the guest by executing, in this order:
#
# - systemd hybrid-sleep
# - pm-utils (via pm-suspend-hybrid)
#
# IMPORTANT: guest-suspend-hybrid requires QEMU to support the 'system_wakeup'
# command. Thus, it's *required* to query QEMU for the presence of the
+8 -4
View File
@@ -37,21 +37,23 @@ size_t qstring_get_length(const QString *qstring)
*
* Return string reference
*/
QString *qstring_from_substr(const char *str, int start, int end)
QString *qstring_from_substr(const char *str, size_t start, size_t end)
{
QString *qstring;
assert(start <= end);
qstring = g_malloc(sizeof(*qstring));
qobject_init(QOBJECT(qstring), QTYPE_QSTRING);
qstring->length = end - start + 1;
qstring->length = end - start;
qstring->capacity = qstring->length;
assert(qstring->capacity < SIZE_MAX);
qstring->string = g_malloc(qstring->capacity + 1);
memcpy(qstring->string, str + start, qstring->length);
qstring->string[qstring->length] = 0;
return qstring;
}
@@ -62,13 +64,15 @@ QString *qstring_from_substr(const char *str, int start, int end)
*/
QString *qstring_from_str(const char *str)
{
return qstring_from_substr(str, 0, strlen(str) - 1);
return qstring_from_substr(str, 0, strlen(str));
}
static void capacity_increase(QString *qstring, size_t len)
{
if (qstring->capacity < (qstring->length + len)) {
assert(len <= SIZE_MAX - qstring->capacity);
qstring->capacity += len;
assert(qstring->capacity <= SIZE_MAX / 2);
qstring->capacity *= 2; /* use exponential growth */
qstring->string = g_realloc(qstring->string, qstring->capacity + 1);
+1
View File
@@ -19,6 +19,7 @@ pushd ${destination}
git checkout "v${version}"
git submodule update --init
(cd roms/seabios && git describe --tags --long --dirty > .version)
(cd roms/skiboot && ./make_version.sh > .version)
# FIXME: The following line is a workaround for avoiding filename collisions
# when unpacking u-boot sources on case-insensitive filesystems. Once we
# update to something with u-boot commit 610eec7f0 we can drop this line.
+22 -10
View File
@@ -159,6 +159,7 @@ static void bootp_reply(Slirp *slirp, const struct bootp_t *bp)
struct in_addr preq_addr;
int dhcp_msg_type, val;
uint8_t *q;
uint8_t *end;
uint8_t client_ethaddr[ETH_ALEN];
/* extract exact DHCP msg type */
@@ -240,6 +241,7 @@ static void bootp_reply(Slirp *slirp, const struct bootp_t *bp)
rbp->bp_siaddr = saddr.sin_addr; /* Server IP address */
q = rbp->bp_vend;
end = (uint8_t *)&rbp[1];
memcpy(q, rfc1533_cookie, 4);
q += 4;
@@ -292,24 +294,33 @@ static void bootp_reply(Slirp *slirp, const struct bootp_t *bp)
if (*slirp->client_hostname) {
val = strlen(slirp->client_hostname);
*q++ = RFC1533_HOSTNAME;
*q++ = val;
memcpy(q, slirp->client_hostname, val);
q += val;
if (q + val + 2 >= end) {
g_warning("DHCP packet size exceeded, "
"omitting host name option.");
} else {
*q++ = RFC1533_HOSTNAME;
*q++ = val;
memcpy(q, slirp->client_hostname, val);
q += val;
}
}
if (slirp->vdomainname) {
val = strlen(slirp->vdomainname);
*q++ = RFC1533_DOMAINNAME;
*q++ = val;
memcpy(q, slirp->vdomainname, val);
q += val;
if (q + val + 2 >= end) {
g_warning("DHCP packet size exceeded, "
"omitting domain name option.");
} else {
*q++ = RFC1533_DOMAINNAME;
*q++ = val;
memcpy(q, slirp->vdomainname, val);
q += val;
}
}
if (slirp->vdnssearch) {
size_t spaceleft = sizeof(rbp->bp_vend) - (q - rbp->bp_vend);
val = slirp->vdnssearch_len;
if (val + 1 > spaceleft) {
if (q + val >= end) {
g_warning("DHCP packet size exceeded, "
"omitting domain-search option.");
} else {
@@ -331,6 +342,7 @@ static void bootp_reply(Slirp *slirp, const struct bootp_t *bp)
memcpy(q, nak_msg, sizeof(nak_msg) - 1);
q += sizeof(nak_msg) - 1;
}
assert(q < end);
*q = RFC1533_END;
daddr.sin_addr.s_addr = 0xffffffffu;
+1 -1
View File
@@ -154,7 +154,7 @@ m_inc(struct mbuf *m, int size)
int datasize;
/* some compilers throw up on gotos. This one we can fake. */
if (m->m_size > size) {
if (M_ROOM(m) > size) {
return;
}
+10 -5
View File
@@ -640,6 +640,11 @@ tcp_emu(struct socket *so, struct mbuf *m)
socklen_t addrlen = sizeof(struct sockaddr_in);
struct sbuf *so_rcv = &so->so_rcv;
if (m->m_len > so_rcv->sb_datalen
- (so_rcv->sb_wptr - so_rcv->sb_data)) {
return 1;
}
memcpy(so_rcv->sb_wptr, m->m_data, m->m_len);
so_rcv->sb_wptr += m->m_len;
so_rcv->sb_rptr += m->m_len;
@@ -662,12 +667,12 @@ tcp_emu(struct socket *so, struct mbuf *m)
break;
}
}
so_rcv->sb_cc = snprintf(so_rcv->sb_data,
so_rcv->sb_datalen,
"%d,%d\r\n", n1, n2);
so_rcv->sb_rptr = so_rcv->sb_data;
so_rcv->sb_wptr = so_rcv->sb_data + so_rcv->sb_cc;
}
so_rcv->sb_cc = snprintf(so_rcv->sb_data,
so_rcv->sb_datalen,
"%d,%d\r\n", n1, n2);
so_rcv->sb_rptr = so_rcv->sb_data;
so_rcv->sb_wptr = so_rcv->sb_data + so_rcv->sb_cc;
}
m_free(m);
return 0;
+3 -3
View File
@@ -168,9 +168,9 @@ static void arm_cpu_reset(CPUState *s)
env->cp15.cpacr_el1 = deposit64(env->cp15.cpacr_el1, 16, 2, 3);
env->cp15.cptr_el[3] |= CPTR_EZ;
/* with maximum vector length */
env->vfp.zcr_el[1] = ARM_MAX_VQ - 1;
env->vfp.zcr_el[2] = ARM_MAX_VQ - 1;
env->vfp.zcr_el[3] = ARM_MAX_VQ - 1;
env->vfp.zcr_el[1] = cpu->sve_max_vq - 1;
env->vfp.zcr_el[2] = env->vfp.zcr_el[1];
env->vfp.zcr_el[3] = env->vfp.zcr_el[1];
#else
/* Reset into the highest available EL */
if (arm_feature(env, ARM_FEATURE_EL3)) {
+4 -1
View File
@@ -857,6 +857,9 @@ struct ARMCPU {
/* Used to synchronize KVM and QEMU in-kernel device levels */
uint8_t device_irq_level;
/* Used to set the maximum vector length the cpu will support. */
uint32_t sve_max_vq;
};
static inline ARMCPU *arm_env_get_cpu(CPUARMState *env)
@@ -1260,7 +1263,7 @@ void vfp_set_fpscr(CPUARMState *env, uint32_t val);
* we store the underlying state in fpscr and just mask on read/write.
*/
#define FPSR_MASK 0xf800009f
#define FPCR_MASK 0x07f79f00
#define FPCR_MASK 0x07ff9f00
#define FPCR_FZ16 (1 << 19) /* ARMv8.2+, FP16 flush-to-zero */
#define FPCR_FZ (1 << 24) /* Flush-to-zero enable bit */
+29
View File
@@ -29,6 +29,7 @@
#include "sysemu/sysemu.h"
#include "sysemu/kvm.h"
#include "kvm_arm.h"
#include "qapi/visitor.h"
static inline void set_feature(CPUARMState *env, int feature)
{
@@ -217,6 +218,29 @@ static void aarch64_a53_initfn(Object *obj)
define_arm_cp_regs(cpu, cortex_a57_a53_cp_reginfo);
}
static void cpu_max_get_sve_vq(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
ARMCPU *cpu = ARM_CPU(obj);
visit_type_uint32(v, name, &cpu->sve_max_vq, errp);
}
static void cpu_max_set_sve_vq(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
ARMCPU *cpu = ARM_CPU(obj);
Error *err = NULL;
visit_type_uint32(v, name, &cpu->sve_max_vq, &err);
if (!err && (cpu->sve_max_vq == 0 || cpu->sve_max_vq > ARM_MAX_VQ)) {
error_setg(&err, "unsupported SVE vector length");
error_append_hint(&err, "Valid sve-max-vq in range [1-%d]\n",
ARM_MAX_VQ);
}
error_propagate(errp, err);
}
/* -cpu max: if KVM is enabled, like -cpu host (best possible with this host);
* otherwise, a CPU with as many features enabled as our emulation supports.
* The version of '-cpu max' for qemu-system-arm is defined in cpu.c;
@@ -253,6 +277,10 @@ static void aarch64_max_initfn(Object *obj)
cpu->ctr = 0x80038003; /* 32 byte I and D cacheline size, VIPT icache */
cpu->dcz_blocksize = 7; /* 512 bytes */
#endif
cpu->sve_max_vq = ARM_MAX_VQ;
object_property_add(obj, "sve-max-vq", "uint32", cpu_max_get_sve_vq,
cpu_max_set_sve_vq, NULL, NULL, &error_fatal);
}
}
@@ -405,6 +433,7 @@ void aarch64_sve_narrow_vq(CPUARMState *env, unsigned vq)
uint64_t pmask;
assert(vq >= 1 && vq <= ARM_MAX_VQ);
assert(vq <= arm_env_get_cpu(env)->sve_max_vq);
/* Zap the high bits of the zregs. */
for (i = 0; i < 32; i++) {
+35 -26
View File
@@ -5591,12 +5591,6 @@ void arm_cpu_list(FILE *f, fprintf_function cpu_fprintf)
(*cpu_fprintf)(f, "Available CPUs:\n");
g_slist_foreach(list, arm_cpu_list_entry, &s);
g_slist_free(list);
#ifdef CONFIG_KVM
/* The 'host' CPU type is dynamically registered only if KVM is
* enabled, so we have to special-case it here:
*/
(*cpu_fprintf)(f, " host (only available in KVM mode)\n");
#endif
}
static void arm_cpu_add_definition(gpointer data, gpointer user_data)
@@ -6864,7 +6858,7 @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain,
* not already saved.
*/
if (lr & R_V7M_EXCRET_DCRS_MASK &&
!(dotailchain && (lr & R_V7M_EXCRET_ES_MASK))) {
!(dotailchain && !(lr & R_V7M_EXCRET_ES_MASK))) {
push_failed = v7m_push_callee_stack(cpu, lr, dotailchain,
ignore_stackfaults);
}
@@ -11289,9 +11283,13 @@ uint32_t HELPER(vfp_get_fpscr)(CPUARMState *env)
fpscr = (env->vfp.xregs[ARM_VFP_FPSCR] & 0xffc8ffff)
| (env->vfp.vec_len << 16)
| (env->vfp.vec_stride << 20);
i = get_float_exception_flags(&env->vfp.fp_status);
i |= get_float_exception_flags(&env->vfp.standard_fp_status);
i |= get_float_exception_flags(&env->vfp.fp_status_f16);
/* FZ16 does not generate an input denormal exception. */
i |= (get_float_exception_flags(&env->vfp.fp_status_f16)
& ~float_flag_input_denormal);
fpscr |= vfp_exceptbits_from_host(i);
return fpscr;
}
@@ -11326,6 +11324,11 @@ void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val)
int i;
uint32_t changed;
/* When ARMv8.2-FP16 is not supported, FZ16 is RES0. */
if (!arm_feature(env, ARM_FEATURE_V8_FP16)) {
val &= ~FPCR_FZ16;
}
changed = env->vfp.xregs[ARM_VFP_FPSCR];
env->vfp.xregs[ARM_VFP_FPSCR] = (val & 0xffc8ffff);
env->vfp.vec_len = (val >> 16) & 7;
@@ -12398,33 +12401,39 @@ void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc,
uint32_t flags;
if (is_a64(env)) {
int sve_el = sve_exception_el(env);
uint32_t zcr_len;
*pc = env->pc;
flags = ARM_TBFLAG_AARCH64_STATE_MASK;
/* Get control bits for tagged addresses */
flags |= (arm_regime_tbi0(env, mmu_idx) << ARM_TBFLAG_TBI0_SHIFT);
flags |= (arm_regime_tbi1(env, mmu_idx) << ARM_TBFLAG_TBI1_SHIFT);
flags |= sve_el << ARM_TBFLAG_SVEEXC_EL_SHIFT;
/* If SVE is disabled, but FP is enabled,
then the effective len is 0. */
if (sve_el != 0 && fp_el == 0) {
zcr_len = 0;
} else {
int current_el = arm_current_el(env);
if (arm_feature(env, ARM_FEATURE_SVE)) {
int sve_el = sve_exception_el(env);
uint32_t zcr_len;
zcr_len = env->vfp.zcr_el[current_el <= 1 ? 1 : current_el];
zcr_len &= 0xf;
if (current_el < 2 && arm_feature(env, ARM_FEATURE_EL2)) {
zcr_len = MIN(zcr_len, 0xf & (uint32_t)env->vfp.zcr_el[2]);
}
if (current_el < 3 && arm_feature(env, ARM_FEATURE_EL3)) {
zcr_len = MIN(zcr_len, 0xf & (uint32_t)env->vfp.zcr_el[3]);
/* If SVE is disabled, but FP is enabled,
* then the effective len is 0.
*/
if (sve_el != 0 && fp_el == 0) {
zcr_len = 0;
} else {
int current_el = arm_current_el(env);
ARMCPU *cpu = arm_env_get_cpu(env);
zcr_len = cpu->sve_max_vq - 1;
if (current_el <= 1) {
zcr_len = MIN(zcr_len, 0xf & (uint32_t)env->vfp.zcr_el[1]);
}
if (current_el < 2 && arm_feature(env, ARM_FEATURE_EL2)) {
zcr_len = MIN(zcr_len, 0xf & (uint32_t)env->vfp.zcr_el[2]);
}
if (current_el < 3 && arm_feature(env, ARM_FEATURE_EL3)) {
zcr_len = MIN(zcr_len, 0xf & (uint32_t)env->vfp.zcr_el[3]);
}
}
flags |= sve_el << ARM_TBFLAG_SVEEXC_EL_SHIFT;
flags |= zcr_len << ARM_TBFLAG_ZCR_LEN_SHIFT;
}
flags |= zcr_len << ARM_TBFLAG_ZCR_LEN_SHIFT;
} else {
*pc = env->regs[15];
flags = (env->thumb << ARM_TBFLAG_THUMB_SHIFT)
+3
View File
@@ -184,6 +184,7 @@ static const VMStateDescription vmstate_m_faultmask_primask = {
.name = "cpu/m/faultmask-primask",
.version_id = 1,
.minimum_version_id = 1,
.needed = m_needed,
.fields = (VMStateField[]) {
VMSTATE_UINT32(env.v7m.faultmask[M_REG_NS], ARMCPU),
VMSTATE_UINT32(env.v7m.primask[M_REG_NS], ARMCPU),
@@ -230,6 +231,7 @@ static const VMStateDescription vmstate_m_scr = {
.name = "cpu/m/scr",
.version_id = 1,
.minimum_version_id = 1,
.needed = m_needed,
.fields = (VMStateField[]) {
VMSTATE_UINT32(env.v7m.scr[M_REG_NS], ARMCPU),
VMSTATE_END_OF_LIST()
@@ -240,6 +242,7 @@ static const VMStateDescription vmstate_m_other_sp = {
.name = "cpu/m/other-sp",
.version_id = 1,
.minimum_version_id = 1,
.needed = m_needed,
.fields = (VMStateField[]) {
VMSTATE_UINT32(env.v7m.other_sp, ARMCPU),
VMSTATE_END_OF_LIST()
+9 -14
View File
@@ -1042,7 +1042,7 @@ void HELPER(sve_movz_d)(void *vd, void *vn, void *vg, uint32_t desc)
uint64_t *d = vd, *n = vn;
uint8_t *pg = vg;
for (i = 0; i < opr_sz; i += 1) {
d[i] = n[1] & -(uint64_t)(pg[H1(i)] & 1);
d[i] = n[i] & -(uint64_t)(pg[H1(i)] & 1);
}
}
@@ -2436,13 +2436,13 @@ uint32_t HELPER(NAME)(void *vd, void *vn, void *vm, void *vg, uint32_t desc) \
#define DO_CMP_PPZW_S(NAME, TYPE, TYPEW, OP) \
DO_CMP_PPZW(NAME, TYPE, TYPEW, OP, H1_4, 0x1111111111111111ull)
DO_CMP_PPZW_B(sve_cmpeq_ppzw_b, uint8_t, uint64_t, ==)
DO_CMP_PPZW_H(sve_cmpeq_ppzw_h, uint16_t, uint64_t, ==)
DO_CMP_PPZW_S(sve_cmpeq_ppzw_s, uint32_t, uint64_t, ==)
DO_CMP_PPZW_B(sve_cmpeq_ppzw_b, int8_t, uint64_t, ==)
DO_CMP_PPZW_H(sve_cmpeq_ppzw_h, int16_t, uint64_t, ==)
DO_CMP_PPZW_S(sve_cmpeq_ppzw_s, int32_t, uint64_t, ==)
DO_CMP_PPZW_B(sve_cmpne_ppzw_b, uint8_t, uint64_t, !=)
DO_CMP_PPZW_H(sve_cmpne_ppzw_h, uint16_t, uint64_t, !=)
DO_CMP_PPZW_S(sve_cmpne_ppzw_s, uint32_t, uint64_t, !=)
DO_CMP_PPZW_B(sve_cmpne_ppzw_b, int8_t, uint64_t, !=)
DO_CMP_PPZW_H(sve_cmpne_ppzw_h, int16_t, uint64_t, !=)
DO_CMP_PPZW_S(sve_cmpne_ppzw_s, int32_t, uint64_t, !=)
DO_CMP_PPZW_B(sve_cmpgt_ppzw_b, int8_t, int64_t, >)
DO_CMP_PPZW_H(sve_cmpgt_ppzw_h, int16_t, int64_t, >)
@@ -2846,11 +2846,6 @@ uint32_t HELPER(sve_while)(void *vd, uint32_t count, uint32_t pred_desc)
return flags;
}
/* Scale from predicate element count to bits. */
count <<= esz;
/* Bound to the bits in the predicate. */
count = MIN(count, oprsz * 8);
/* Set all of the requested bits. */
for (i = 0; i < count / 64; ++i) {
d->p[i] = esz_mask;
@@ -3363,7 +3358,7 @@ static void do_fmla_zpzzz_h(CPUARMState *env, void *vg, uint32_t desc,
e1 = *(uint16_t *)(vn + H1_2(i)) ^ neg1;
e2 = *(uint16_t *)(vm + H1_2(i));
e3 = *(uint16_t *)(va + H1_2(i)) ^ neg3;
r = float16_muladd(e1, e2, e3, 0, &env->vfp.fp_status);
r = float16_muladd(e1, e2, e3, 0, &env->vfp.fp_status_f16);
*(uint16_t *)(vd + H1_2(i)) = r;
}
} while (i & 63);
@@ -4050,7 +4045,7 @@ DO_LD1(sve_ld1bdu_r, cpu_ldub_data_ra, uint64_t, uint8_t, )
DO_LD1(sve_ld1bds_r, cpu_ldsb_data_ra, uint64_t, int8_t, )
DO_LD1(sve_ld1hsu_r, cpu_lduw_data_ra, uint32_t, uint16_t, H1_4)
DO_LD1(sve_ld1hss_r, cpu_ldsw_data_ra, uint32_t, int8_t, H1_4)
DO_LD1(sve_ld1hss_r, cpu_ldsw_data_ra, uint32_t, int16_t, H1_4)
DO_LD1(sve_ld1hdu_r, cpu_lduw_data_ra, uint64_t, uint16_t, )
DO_LD1(sve_ld1hds_r, cpu_ldsw_data_ra, uint64_t, int16_t, )
+88 -18
View File
@@ -137,14 +137,13 @@ void aarch64_cpu_dump_state(CPUState *cs, FILE *f,
int el = arm_current_el(env);
const char *ns_status;
cpu_fprintf(f, "PC=%016"PRIx64" SP=%016"PRIx64"\n",
env->pc, env->xregs[31]);
for (i = 0; i < 31; i++) {
cpu_fprintf(f, "X%02d=%016"PRIx64, i, env->xregs[i]);
if ((i % 4) == 3) {
cpu_fprintf(f, "\n");
cpu_fprintf(f, " PC=%016" PRIx64 " ", env->pc);
for (i = 0; i < 32; i++) {
if (i == 31) {
cpu_fprintf(f, " SP=%016" PRIx64 "\n", env->xregs[i]);
} else {
cpu_fprintf(f, " ");
cpu_fprintf(f, "X%02d=%016" PRIx64 "%s", i, env->xregs[i],
(i + 2) % 3 ? " " : "\n");
}
}
@@ -153,8 +152,7 @@ void aarch64_cpu_dump_state(CPUState *cs, FILE *f,
} else {
ns_status = "";
}
cpu_fprintf(f, "\nPSTATE=%08x %c%c%c%c %sEL%d%c\n",
cpu_fprintf(f, "PSTATE=%08x %c%c%c%c %sEL%d%c",
psr,
psr & PSTATE_N ? 'N' : '-',
psr & PSTATE_Z ? 'Z' : '-',
@@ -164,17 +162,89 @@ void aarch64_cpu_dump_state(CPUState *cs, FILE *f,
el,
psr & PSTATE_SP ? 'h' : 't');
if (flags & CPU_DUMP_FPU) {
int numvfpregs = 32;
for (i = 0; i < numvfpregs; i++) {
if (!(flags & CPU_DUMP_FPU)) {
cpu_fprintf(f, "\n");
return;
}
cpu_fprintf(f, " FPCR=%08x FPSR=%08x\n",
vfp_get_fpcr(env), vfp_get_fpsr(env));
if (arm_feature(env, ARM_FEATURE_SVE)) {
int j, zcr_len = env->vfp.zcr_el[1] & 0xf; /* fix for system mode */
for (i = 0; i <= FFR_PRED_NUM; i++) {
bool eol;
if (i == FFR_PRED_NUM) {
cpu_fprintf(f, "FFR=");
/* It's last, so end the line. */
eol = true;
} else {
cpu_fprintf(f, "P%02d=", i);
switch (zcr_len) {
case 0:
eol = i % 8 == 7;
break;
case 1:
eol = i % 6 == 5;
break;
case 2:
case 3:
eol = i % 3 == 2;
break;
default:
/* More than one quadword per predicate. */
eol = true;
break;
}
}
for (j = zcr_len / 4; j >= 0; j--) {
int digits;
if (j * 4 + 4 <= zcr_len + 1) {
digits = 16;
} else {
digits = (zcr_len % 4 + 1) * 4;
}
cpu_fprintf(f, "%0*" PRIx64 "%s", digits,
env->vfp.pregs[i].p[j],
j ? ":" : eol ? "\n" : " ");
}
}
for (i = 0; i < 32; i++) {
if (zcr_len == 0) {
cpu_fprintf(f, "Z%02d=%016" PRIx64 ":%016" PRIx64 "%s",
i, env->vfp.zregs[i].d[1],
env->vfp.zregs[i].d[0], i & 1 ? "\n" : " ");
} else if (zcr_len == 1) {
cpu_fprintf(f, "Z%02d=%016" PRIx64 ":%016" PRIx64
":%016" PRIx64 ":%016" PRIx64 "\n",
i, env->vfp.zregs[i].d[3], env->vfp.zregs[i].d[2],
env->vfp.zregs[i].d[1], env->vfp.zregs[i].d[0]);
} else {
for (j = zcr_len; j >= 0; j--) {
bool odd = (zcr_len - j) % 2 != 0;
if (j == zcr_len) {
cpu_fprintf(f, "Z%02d[%x-%x]=", i, j, j - 1);
} else if (!odd) {
if (j > 0) {
cpu_fprintf(f, " [%x-%x]=", j, j - 1);
} else {
cpu_fprintf(f, " [%x]=", j);
}
}
cpu_fprintf(f, "%016" PRIx64 ":%016" PRIx64 "%s",
env->vfp.zregs[i].d[j * 2 + 1],
env->vfp.zregs[i].d[j * 2],
odd || j == 0 ? "\n" : ":");
}
}
}
} else {
for (i = 0; i < 32; i++) {
uint64_t *q = aa64_vfp_qreg(env, i);
uint64_t vlo = q[0];
uint64_t vhi = q[1];
cpu_fprintf(f, "q%02d=%016" PRIx64 ":%016" PRIx64 "%c",
i, vhi, vlo, (i & 1 ? '\n' : ' '));
cpu_fprintf(f, "Q%02d=%016" PRIx64 ":%016" PRIx64 "%s",
i, q[1], q[0], (i & 1 ? "\n" : " "));
}
cpu_fprintf(f, "FPCR: %08x FPSR: %08x\n",
vfp_get_fpcr(env), vfp_get_fpsr(env));
}
}
+47 -34
View File
@@ -1625,7 +1625,7 @@ static void do_sat_addsub_64(TCGv_i64 reg, TCGv_i64 val, bool u, bool d)
/* Detect signed overflow for subtraction. */
tcg_gen_xor_i64(t0, reg, val);
tcg_gen_sub_i64(t1, reg, val);
tcg_gen_xor_i64(reg, reg, t0);
tcg_gen_xor_i64(reg, reg, t1);
tcg_gen_and_i64(t0, t0, reg);
/* Bound the result. */
@@ -3173,19 +3173,19 @@ static bool trans_CTERM(DisasContext *s, arg_CTERM *a, uint32_t insn)
static bool trans_WHILE(DisasContext *s, arg_WHILE *a, uint32_t insn)
{
if (!sve_access_check(s)) {
return true;
}
TCGv_i64 op0 = read_cpu_reg(s, a->rn, 1);
TCGv_i64 op1 = read_cpu_reg(s, a->rm, 1);
TCGv_i64 t0 = tcg_temp_new_i64();
TCGv_i64 t1 = tcg_temp_new_i64();
TCGv_i64 op0, op1, t0, t1, tmax;
TCGv_i32 t2, t3;
TCGv_ptr ptr;
unsigned desc, vsz = vec_full_reg_size(s);
TCGCond cond;
if (!sve_access_check(s)) {
return true;
}
op0 = read_cpu_reg(s, a->rn, 1);
op1 = read_cpu_reg(s, a->rm, 1);
if (!a->sf) {
if (a->u) {
tcg_gen_ext32u_i64(op0, op0);
@@ -3198,32 +3198,47 @@ static bool trans_WHILE(DisasContext *s, arg_WHILE *a, uint32_t insn)
/* For the helper, compress the different conditions into a computation
* of how many iterations for which the condition is true.
*
* This is slightly complicated by 0 <= UINT64_MAX, which is nominally
* 2**64 iterations, overflowing to 0. Of course, predicate registers
* aren't that large, so any value >= predicate size is sufficient.
*/
t0 = tcg_temp_new_i64();
t1 = tcg_temp_new_i64();
tcg_gen_sub_i64(t0, op1, op0);
/* t0 = MIN(op1 - op0, vsz). */
tcg_gen_movi_i64(t1, vsz);
tcg_gen_umin_i64(t0, t0, t1);
tmax = tcg_const_i64(vsz >> a->esz);
if (a->eq) {
/* Equality means one more iteration. */
tcg_gen_addi_i64(t0, t0, 1);
/* If op1 is max (un)signed integer (and the only time the addition
* above could overflow), then we produce an all-true predicate by
* setting the count to the vector length. This is because the
* pseudocode is described as an increment + compare loop, and the
* max integer would always compare true.
*/
tcg_gen_movi_i64(t1, (a->sf
? (a->u ? UINT64_MAX : INT64_MAX)
: (a->u ? UINT32_MAX : INT32_MAX)));
tcg_gen_movcond_i64(TCG_COND_EQ, t0, op1, t1, tmax, t0);
}
/* t0 = (condition true ? t0 : 0). */
/* Bound to the maximum. */
tcg_gen_umin_i64(t0, t0, tmax);
tcg_temp_free_i64(tmax);
/* Set the count to zero if the condition is false. */
cond = (a->u
? (a->eq ? TCG_COND_LEU : TCG_COND_LTU)
: (a->eq ? TCG_COND_LE : TCG_COND_LT));
tcg_gen_movi_i64(t1, 0);
tcg_gen_movcond_i64(cond, t0, op0, op1, t0, t1);
tcg_temp_free_i64(t1);
/* Since we're bounded, pass as a 32-bit type. */
t2 = tcg_temp_new_i32();
tcg_gen_extrl_i64_i32(t2, t0);
tcg_temp_free_i64(t0);
tcg_temp_free_i64(t1);
/* Scale elements to bits. */
tcg_gen_shli_i32(t2, t2, a->esz);
desc = (vsz / 8) - 2;
desc = deposit32(desc, SIMD_DATA_SHIFT, 2, a->esz);
@@ -4078,7 +4093,7 @@ static bool do_zpz_ptr(DisasContext *s, int rd, int rn, int pg,
static bool trans_FCVT_sh(DisasContext *s, arg_rpr_esz *a, uint32_t insn)
{
return do_zpz_ptr(s, a->rd, a->rn, a->pg, true, gen_helper_sve_fcvt_sh);
return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_fcvt_sh);
}
static bool trans_FCVT_hs(DisasContext *s, arg_rpr_esz *a, uint32_t insn)
@@ -4088,7 +4103,7 @@ static bool trans_FCVT_hs(DisasContext *s, arg_rpr_esz *a, uint32_t insn)
static bool trans_FCVT_dh(DisasContext *s, arg_rpr_esz *a, uint32_t insn)
{
return do_zpz_ptr(s, a->rd, a->rn, a->pg, true, gen_helper_sve_fcvt_dh);
return do_zpz_ptr(s, a->rd, a->rn, a->pg, false, gen_helper_sve_fcvt_dh);
}
static bool trans_FCVT_hd(DisasContext *s, arg_rpr_esz *a, uint32_t insn)
@@ -4357,12 +4372,11 @@ static bool trans_UCVTF_dd(DisasContext *s, arg_rpr_esz *a, uint32_t insn)
* The load should begin at the address Rn + IMM.
*/
static void do_ldr(DisasContext *s, uint32_t vofs, uint32_t len,
int rn, int imm)
static void do_ldr(DisasContext *s, uint32_t vofs, int len, int rn, int imm)
{
uint32_t len_align = QEMU_ALIGN_DOWN(len, 8);
uint32_t len_remain = len % 8;
uint32_t nparts = len / 8 + ctpop8(len_remain);
int len_align = QEMU_ALIGN_DOWN(len, 8);
int len_remain = len % 8;
int nparts = len / 8 + ctpop8(len_remain);
int midx = get_mem_index(s);
TCGv_i64 addr, t0, t1;
@@ -4443,12 +4457,11 @@ static void do_ldr(DisasContext *s, uint32_t vofs, uint32_t len,
}
/* Similarly for stores. */
static void do_str(DisasContext *s, uint32_t vofs, uint32_t len,
int rn, int imm)
static void do_str(DisasContext *s, uint32_t vofs, int len, int rn, int imm)
{
uint32_t len_align = QEMU_ALIGN_DOWN(len, 8);
uint32_t len_remain = len % 8;
uint32_t nparts = len / 8 + ctpop8(len_remain);
int len_align = QEMU_ALIGN_DOWN(len, 8);
int len_remain = len % 8;
int nparts = len / 8 + ctpop8(len_remain);
int midx = get_mem_index(s);
TCGv_i64 addr, t0;
@@ -4652,8 +4665,7 @@ static bool trans_LD_zprr(DisasContext *s, arg_rprr_load *a, uint32_t insn)
}
if (sve_access_check(s)) {
TCGv_i64 addr = new_tmp_a64(s);
tcg_gen_muli_i64(addr, cpu_reg(s, a->rm),
(a->nreg + 1) << dtype_msz(a->dtype));
tcg_gen_shli_i64(addr, cpu_reg(s, a->rm), dtype_msz(a->dtype));
tcg_gen_add_i64(addr, addr, cpu_reg_sp(s, a->rn));
do_ld_zpa(s, a->rd, a->pg, addr, a->dtype, a->nreg);
}
@@ -4806,6 +4818,7 @@ static bool trans_LD1R_zpri(DisasContext *s, arg_rpri_load *a, uint32_t insn)
unsigned vsz = vec_full_reg_size(s);
unsigned psz = pred_full_reg_size(s);
unsigned esz = dtype_esz[a->dtype];
unsigned msz = dtype_msz(a->dtype);
TCGLabel *over = gen_new_label();
TCGv_i64 temp;
@@ -4829,7 +4842,7 @@ static bool trans_LD1R_zpri(DisasContext *s, arg_rpri_load *a, uint32_t insn)
/* Load the data. */
temp = tcg_temp_new_i64();
tcg_gen_addi_i64(temp, cpu_reg_sp(s, a->rn), a->imm << esz);
tcg_gen_addi_i64(temp, cpu_reg_sp(s, a->rn), a->imm << msz);
tcg_gen_qemu_ld_i64(temp, temp, get_mem_index(s),
s->be_data | dtype_mop[a->dtype]);
@@ -4885,7 +4898,7 @@ static bool trans_ST_zprr(DisasContext *s, arg_rprr_store *a, uint32_t insn)
}
if (sve_access_check(s)) {
TCGv_i64 addr = new_tmp_a64(s);
tcg_gen_muli_i64(addr, cpu_reg(s, a->rm), (a->nreg + 1) << a->msz);
tcg_gen_shli_i64(addr, cpu_reg(s, a->rm), a->msz);
tcg_gen_add_i64(addr, addr, cpu_reg_sp(s, a->rn));
do_st_zpa(s, a->rd, a->pg, addr, a->msz, a->esz, a->nreg);
}
+8
View File
@@ -849,6 +849,12 @@ static FeatureWordInfo feature_word_info[FEATURE_WORDS] = {
},
.cpuid_eax = 0x80000001, .cpuid_reg = R_ECX,
.tcg_features = TCG_EXT3_FEATURES,
/*
* TOPOEXT is always allowed but can't be enabled blindly by
* "-cpu host", as it requires consistent cache topology info
* to be provided so it doesn't confuse guests.
*/
.no_autoenable_flags = CPUID_EXT3_TOPOEXT,
},
[FEAT_C000_0001_EDX] = {
.feat_names = {
@@ -5435,6 +5441,8 @@ static Property x86_cpu_properties[] = {
false),
DEFINE_PROP_BOOL("vmware-cpuid-freq", X86CPU, vmware_cpuid_freq, true),
DEFINE_PROP_BOOL("tcg-cpuid", X86CPU, expose_tcg, true),
DEFINE_PROP_BOOL("x-migrate-smi-count", X86CPU, migrate_smi_count,
true),
/*
* lecacy_cache defaults to true unless the CPU model provides its
* own cache information (see x86_cpu_load_def()).
+1
View File
@@ -1379,6 +1379,7 @@ struct X86CPU {
bool expose_kvm;
bool expose_tcg;
bool migratable;
bool migrate_smi_count;
bool max_features; /* Enable all supported features automatically */
uint32_t apic_id;
+1 -1
View File
@@ -400,7 +400,7 @@ static bool msr_smi_count_needed(void *opaque)
X86CPU *cpu = opaque;
CPUX86State *env = &cpu->env;
return env->msr_smi_count != 0;
return cpu->migrate_smi_count && env->msr_smi_count != 0;
}
static const VMStateDescription vmstate_msr_smi_count = {
+3
View File
@@ -447,6 +447,9 @@ void helper_rdmsr(CPUX86State *env)
val = env->tsc_aux;
break;
#endif
case MSR_SMI_COUNT:
val = env->msr_smi_count;
break;
case MSR_MTRRphysBase(0):
case MSR_MTRRphysBase(1):
case MSR_MTRRphysBase(2):
Loaded 100 of 153 files, more files were not shown because too many files have changed in this diff. Show more