Update version for v2.8.0 release

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

VERSION

@@ -1 +1 @@
-2.7.92
+2.8.0

block/gluster.c

@@ -48,7 +48,7 @@ typedef struct BDRVGlusterState {
     struct glfs_fd *fd;
     char *logfile;
     bool supports_seek_data;
-    int debug_level;
+    int debug;
 } BDRVGlusterState;
 
 typedef struct BDRVGlusterReopenState {
@@ -434,7 +434,7 @@ static struct glfs *qemu_gluster_glfs_init(BlockdevOptionsGluster *gconf,
         }
     }
 
-    ret = glfs_set_logging(glfs, gconf->logfile, gconf->debug_level);
+    ret = glfs_set_logging(glfs, gconf->logfile, gconf->debug);
     if (ret < 0) {
         goto out;
     }
@@ -788,17 +788,17 @@ static int qemu_gluster_open(BlockDriverState *bs,  QDict *options,
 
     filename = qemu_opt_get(opts, GLUSTER_OPT_FILENAME);
 
-    s->debug_level = qemu_opt_get_number(opts, GLUSTER_OPT_DEBUG,
-                                         GLUSTER_DEBUG_DEFAULT);
-    if (s->debug_level < 0) {
-        s->debug_level = 0;
-    } else if (s->debug_level > GLUSTER_DEBUG_MAX) {
-        s->debug_level = GLUSTER_DEBUG_MAX;
+    s->debug = qemu_opt_get_number(opts, GLUSTER_OPT_DEBUG,
+                                   GLUSTER_DEBUG_DEFAULT);
+    if (s->debug < 0) {
+        s->debug = 0;
+    } else if (s->debug > GLUSTER_DEBUG_MAX) {
+        s->debug = GLUSTER_DEBUG_MAX;
     }
 
     gconf = g_new0(BlockdevOptionsGluster, 1);
-    gconf->debug_level = s->debug_level;
-    gconf->has_debug_level = true;
+    gconf->debug = s->debug;
+    gconf->has_debug = true;
 
     logfile = qemu_opt_get(opts, GLUSTER_OPT_LOGFILE);
     s->logfile = g_strdup(logfile ? logfile : GLUSTER_LOGFILE_DEFAULT);
@@ -874,8 +874,8 @@ static int qemu_gluster_reopen_prepare(BDRVReopenState *state,
     qemu_gluster_parse_flags(state->flags, &open_flags);
 
     gconf = g_new0(BlockdevOptionsGluster, 1);
-    gconf->debug_level = s->debug_level;
-    gconf->has_debug_level = true;
+    gconf->debug = s->debug;
+    gconf->has_debug = true;
     gconf->logfile = g_strdup(s->logfile);
     gconf->has_logfile = true;
     reop_s->glfs = qemu_gluster_init(gconf, state->bs->filename, NULL, errp);
@@ -1011,14 +1011,14 @@ static int qemu_gluster_create(const char *filename,
     char *tmp = NULL;
 
     gconf = g_new0(BlockdevOptionsGluster, 1);
-    gconf->debug_level = qemu_opt_get_number_del(opts, GLUSTER_OPT_DEBUG,
-                                                 GLUSTER_DEBUG_DEFAULT);
-    if (gconf->debug_level < 0) {
-        gconf->debug_level = 0;
-    } else if (gconf->debug_level > GLUSTER_DEBUG_MAX) {
-        gconf->debug_level = GLUSTER_DEBUG_MAX;
+    gconf->debug = qemu_opt_get_number_del(opts, GLUSTER_OPT_DEBUG,
+                                           GLUSTER_DEBUG_DEFAULT);
+    if (gconf->debug < 0) {
+        gconf->debug = 0;
+    } else if (gconf->debug > GLUSTER_DEBUG_MAX) {
+        gconf->debug = GLUSTER_DEBUG_MAX;
     }
-    gconf->has_debug_level = true;
+    gconf->has_debug = true;
 
     gconf->logfile = qemu_opt_get_del(opts, GLUSTER_OPT_LOGFILE);
     if (!gconf->logfile) {

block/nfs.c

@@ -134,7 +134,7 @@ static int nfs_parse_uri(const char *filename, QDict *options, Error **errp)
             qdict_put(options, "page-cache-size",
                       qstring_from_str(qp->p[i].value));
         } else if (!strcmp(qp->p[i].name, "debug")) {
-            qdict_put(options, "debug-level",
+            qdict_put(options, "debug",
                       qstring_from_str(qp->p[i].value));
         } else {
             error_setg(errp, "Unknown NFS parameter name: %s",
@@ -165,7 +165,7 @@ static bool nfs_has_filename_options_conflict(QDict *options, Error **errp)
             !strcmp(qe->key, "tcp-syn-count") ||
             !strcmp(qe->key, "readahead-size") ||
             !strcmp(qe->key, "page-cache-size") ||
-            !strcmp(qe->key, "debug-level") ||
+            !strcmp(qe->key, "debug") ||
             strstart(qe->key, "server.", NULL))
         {
             error_setg(errp, "Option %s cannot be used with a filename",

block/qcow2.c

@@ -2808,7 +2808,8 @@ static int qcow2_make_empty(BlockDriverState *bs)
 {
     BDRVQcow2State *s = bs->opaque;
     uint64_t start_sector;
-    int sector_step = INT_MAX / BDRV_SECTOR_SIZE;
+    int sector_step = (QEMU_ALIGN_DOWN(INT_MAX, s->cluster_size) /
+                       BDRV_SECTOR_SIZE);
     int l1_clusters, ret = 0;
 
     l1_clusters = DIV_ROUND_UP(s->l1_size, s->cluster_size / sizeof(uint64_t));

docs/specs/vhost-user.txt

@@ -123,22 +123,22 @@ The communication consists of master sending message requests and slave sending
 message replies. Most of the requests don't require replies. Here is a list of
 the ones that do:
 
- * VHOST_GET_FEATURES
- * VHOST_GET_PROTOCOL_FEATURES
- * VHOST_GET_VRING_BASE
- * VHOST_SET_LOG_BASE (if VHOST_USER_PROTOCOL_F_LOG_SHMFD)
+ * VHOST_USER_GET_FEATURES
+ * VHOST_USER_GET_PROTOCOL_FEATURES
+ * VHOST_USER_GET_VRING_BASE
+ * VHOST_USER_SET_LOG_BASE (if VHOST_USER_PROTOCOL_F_LOG_SHMFD)
 
 [ Also see the section on REPLY_ACK protocol extension. ]
 
 There are several messages that the master sends with file descriptors passed
 in the ancillary data:
 
- * VHOST_SET_MEM_TABLE
- * VHOST_SET_LOG_BASE (if VHOST_USER_PROTOCOL_F_LOG_SHMFD)
- * VHOST_SET_LOG_FD
- * VHOST_SET_VRING_KICK
- * VHOST_SET_VRING_CALL
- * VHOST_SET_VRING_ERR
+ * VHOST_USER_SET_MEM_TABLE
+ * VHOST_USER_SET_LOG_BASE (if VHOST_USER_PROTOCOL_F_LOG_SHMFD)
+ * VHOST_USER_SET_LOG_FD
+ * VHOST_USER_SET_VRING_KICK
+ * VHOST_USER_SET_VRING_CALL
+ * VHOST_USER_SET_VRING_ERR
 
 If Master is unable to send the full message or receives a wrong reply it will
 close the connection. An optional reconnection mechanism can be implemented.

exec.c

@@ -684,28 +684,15 @@ void cpu_exec_realizefn(CPUState *cpu, Error **errp)
 #endif
 }
 
-#if defined(CONFIG_USER_ONLY)
 static void breakpoint_invalidate(CPUState *cpu, target_ulong pc)
 {
-    mmap_lock();
-    tb_lock();
-    tb_invalidate_phys_page_range(pc, pc + 1, 0);
-    tb_unlock();
-    mmap_unlock();
+    /* Flush the whole TB as this will not have race conditions
+     * even if we don't have proper locking yet.
+     * Ideally we would just invalidate the TBs for the
+     * specified PC.
+     */
+    tb_flush(cpu);
 }
-#else
-static void breakpoint_invalidate(CPUState *cpu, target_ulong pc)
-{
-    MemTxAttrs attrs;
-    hwaddr phys = cpu_get_phys_page_attrs_debug(cpu, pc, &attrs);
-    int asidx = cpu_asidx_from_attrs(cpu, attrs);
-    if (phys != -1) {
-        /* Locks grabbed by tb_invalidate_phys_addr */
-        tb_invalidate_phys_addr(cpu->cpu_ases[asidx].as,
-                                phys | (pc & ~TARGET_PAGE_MASK));
-    }
-}
-#endif
 
 #if defined(CONFIG_USER_ONLY)
 void cpu_watchpoint_remove_all(CPUState *cpu, int mask)

hw/arm/virt-acpi-build.c

@@ -809,7 +809,7 @@ static MemoryRegion *acpi_add_rom_blob(AcpiBuildState *build_state,
                                        uint64_t max_size)
 {
     return rom_add_blob(name, blob->data, acpi_data_len(blob), max_size, -1,
-                        name, virt_acpi_build_update, build_state);
+                        name, virt_acpi_build_update, build_state, NULL);
 }
 
 static const VMStateDescription vmstate_virt_acpi_build = {

hw/core/loader.c

@@ -818,7 +818,7 @@ static QTAILQ_HEAD(, Rom) roms = QTAILQ_HEAD_INITIALIZER(roms);
 
 static inline bool rom_order_compare(Rom *rom, Rom *item)
 {
-    return (rom->as > item->as) ||
+    return ((uintptr_t)(void *)rom->as > (uintptr_t)(void *)item->as) ||
            (rom->as == item->as && rom->addr >= item->addr);
 }
 
@@ -978,7 +978,8 @@ err:
 
 MemoryRegion *rom_add_blob(const char *name, const void *blob, size_t len,
                    size_t max_len, hwaddr addr, const char *fw_file_name,
-                   FWCfgReadCallback fw_callback, void *callback_opaque)
+                   FWCfgReadCallback fw_callback, void *callback_opaque,
+                   AddressSpace *as)
 {
     MachineClass *mc = MACHINE_GET_CLASS(qdev_get_machine());
     Rom *rom;
@@ -986,6 +987,7 @@ MemoryRegion *rom_add_blob(const char *name, const void *blob, size_t len,
 
     rom           = g_malloc0(sizeof(*rom));
     rom->name     = g_strdup(name);
+    rom->as       = as;
     rom->addr     = addr;
     rom->romsize  = max_len ? max_len : len;
     rom->datasize = len;

hw/display/cirrus_vga.c

@@ -272,6 +272,9 @@ static void cirrus_update_memory_access(CirrusVGAState *s);
 static bool blit_region_is_unsafe(struct CirrusVGAState *s,
                                   int32_t pitch, int32_t addr)
 {
+    if (!pitch) {
+        return true;
+    }
     if (pitch < 0) {
         int64_t min = addr
             + ((int64_t)s->cirrus_blt_height-1) * pitch;
@@ -715,7 +718,7 @@ static int cirrus_bitblt_videotovideo_patterncopy(CirrusVGAState * s)
                                             s->cirrus_addr_mask));
 }
 
-static void cirrus_do_copy(CirrusVGAState *s, int dst, int src, int w, int h)
+static int cirrus_do_copy(CirrusVGAState *s, int dst, int src, int w, int h)
 {
     int sx = 0, sy = 0;
     int dx = 0, dy = 0;
@@ -729,6 +732,9 @@ static void cirrus_do_copy(CirrusVGAState *s, int dst, int src, int w, int h)
         int width, height;
 
         depth = s->vga.get_bpp(&s->vga) / 8;
+        if (!depth) {
+            return 0;
+        }
         s->vga.get_resolution(&s->vga, &width, &height);
 
         /* extra x, y */
@@ -783,6 +789,8 @@ static void cirrus_do_copy(CirrusVGAState *s, int dst, int src, int w, int h)
     cirrus_invalidate_region(s, s->cirrus_blt_dstaddr,
 				s->cirrus_blt_dstpitch, s->cirrus_blt_width,
 				s->cirrus_blt_height);
+
+    return 1;
 }
 
 static int cirrus_bitblt_videotovideo_copy(CirrusVGAState * s)
@@ -790,11 +798,9 @@ static int cirrus_bitblt_videotovideo_copy(CirrusVGAState * s)
     if (blit_is_unsafe(s))
         return 0;
 
-    cirrus_do_copy(s, s->cirrus_blt_dstaddr - s->vga.start_addr,
+    return cirrus_do_copy(s, s->cirrus_blt_dstaddr - s->vga.start_addr,
             s->cirrus_blt_srcaddr - s->vga.start_addr,
             s->cirrus_blt_width, s->cirrus_blt_height);
-
-    return 1;
 }
 
 /***************************************

hw/display/qxl.c

@@ -992,6 +992,34 @@ static uint32_t qxl_crc32(const uint8_t *p, unsigned len)
     return crc32(0xffffffff, p, len) ^ 0xffffffff;
 }
 
+static bool qxl_rom_monitors_config_changed(QXLRom *rom,
+        VDAgentMonitorsConfig *monitors_config,
+        unsigned int max_outputs)
+{
+    int i;
+    unsigned int monitors_count;
+
+    monitors_count = MIN(monitors_config->num_of_monitors, max_outputs);
+
+    if (rom->client_monitors_config.count != monitors_count) {
+        return true;
+    }
+
+    for (i = 0 ; i < rom->client_monitors_config.count ; ++i) {
+        VDAgentMonConfig *monitor = &monitors_config->monitors[i];
+        QXLURect *rect = &rom->client_monitors_config.heads[i];
+        /* monitor->depth ignored */
+        if ((rect->left != monitor->x) ||
+            (rect->top != monitor->y)  ||
+            (rect->right != monitor->x + monitor->width) ||
+            (rect->bottom != monitor->y + monitor->height)) {
+            return true;
+        }
+    }
+
+    return false;
+}
+
 /* called from main context only */
 static int interface_client_monitors_config(QXLInstance *sin,
                                         VDAgentMonitorsConfig *monitors_config)
@@ -1000,6 +1028,7 @@ static int interface_client_monitors_config(QXLInstance *sin,
     QXLRom *rom = memory_region_get_ram_ptr(&qxl->rom_bar);
     int i;
     unsigned max_outputs = ARRAY_SIZE(rom->client_monitors_config.heads);
+    bool config_changed = false;
 
     if (qxl->revision < 4) {
         trace_qxl_client_monitors_config_unsupported_by_device(qxl->id,
@@ -1030,6 +1059,10 @@ static int interface_client_monitors_config(QXLInstance *sin,
     }
 #endif
 
+    config_changed = qxl_rom_monitors_config_changed(rom,
+                                                     monitors_config,
+                                                     max_outputs);
+
     memset(&rom->client_monitors_config, 0,
            sizeof(rom->client_monitors_config));
     rom->client_monitors_config.count = monitors_config->num_of_monitors;
@@ -1059,7 +1092,9 @@ static int interface_client_monitors_config(QXLInstance *sin,
     trace_qxl_interrupt_client_monitors_config(qxl->id,
                         rom->client_monitors_config.count,
                         rom->client_monitors_config.heads);
-    qxl_send_events(qxl, QXL_INTERRUPT_CLIENT_MONITORS_CONFIG);
+    if (config_changed) {
+        qxl_send_events(qxl, QXL_INTERRUPT_CLIENT_MONITORS_CONFIG);
+    }
     return 1;
 }
 

hw/display/virtio-gpu-3d.c

@@ -347,6 +347,7 @@ static void virgl_cmd_get_capset_info(VirtIOGPU *g,
 
     VIRTIO_GPU_FILL_CMD(info);
 
+    memset(&resp, 0, sizeof(resp));
     if (info.capset_index == 0) {
         resp.capset_id = VIRTIO_GPU_CAPSET_VIRGL;
         virgl_renderer_get_cap_set(resp.capset_id,

hw/display/virtio-gpu.c

@@ -84,6 +84,7 @@ static void update_cursor_data_virgl(VirtIOGPU *g,
 
     if (width != s->current_cursor->width ||
         height != s->current_cursor->height) {
+        free(data);
         return;
     }
 

hw/i386/acpi-build.c

@@ -2936,7 +2936,7 @@ static MemoryRegion *acpi_add_rom_blob(AcpiBuildState *build_state,
                                        uint64_t max_size)
 {
     return rom_add_blob(name, blob->data, acpi_data_len(blob), max_size, -1,
-                        name, acpi_build_update, build_state);
+                        name, acpi_build_update, build_state, NULL);
 }
 
 static const VMStateDescription vmstate_acpi_build = {

hw/i386/intel_iommu.c

@@ -988,6 +988,7 @@ static void vtd_context_device_invalidate(IntelIOMMUState *s,
         mask = 7;   /* Mask bit 2:0 in the SID field */
         break;
     }
+    mask = ~mask;
     VTD_DPRINTF(INV, "device-selective invalidation source 0x%"PRIx16
                     " mask %"PRIu16, source_id, mask);
     vtd_bus = vtd_find_as_from_bus_num(s, VTD_SID_TO_BUS(source_id));

hw/lm32/lm32_hwsetup.h

@@ -75,7 +75,7 @@ static inline void hwsetup_create_rom(HWSetup *hw,
         hwaddr base)
 {
     rom_add_blob("hwsetup", hw->data, TARGET_PAGE_SIZE,
-                 TARGET_PAGE_SIZE, base, NULL, NULL, NULL);
+                 TARGET_PAGE_SIZE, base, NULL, NULL, NULL, NULL);
 }
 
 static inline void hwsetup_add_u8(HWSetup *hw, uint8_t u)

hw/net/fsl_etsec/etsec.c

@@ -348,8 +348,8 @@ static ssize_t etsec_receive(NetClientState *nc,
     eTSEC *etsec = qemu_get_nic_opaque(nc);
 
 #if defined(HEX_DUMP)
-    fprintf(stderr, "%s receive size:%d\n", etsec->nic->nc.name, size);
-    qemu_hexdump(buf, stderr, "", size);
+    fprintf(stderr, "%s receive size:%zd\n", nc->name, size);
+    qemu_hexdump((void *)buf, stderr, "", size);
 #endif
     /* Flush is unnecessary as are already in receiving path */
     etsec->need_flush = false;

hw/net/fsl_etsec/rings.c

@@ -474,6 +474,14 @@ static void rx_init_frame(eTSEC *etsec, const uint8_t *buf, size_t size)
     /* CRC padding (We don't have to compute the CRC) */
     etsec->rx_padding = 4;
 
+    /*
+     * Ensure that payload length + CRC length is at least 802.3
+     * minimum MTU size bytes long (64)
+     */
+    if (etsec->rx_buffer_len < 60) {
+        etsec->rx_padding += 60 - etsec->rx_buffer_len;
+    }
+
     etsec->rx_first_in_frame = 1;
     etsec->rx_remaining_data = etsec->rx_buffer_len;
     RING_DEBUG("%s: rx_buffer_len:%u rx_padding+crc:%u\n", __func__,

hw/net/mcf_fec.c

@@ -393,7 +393,7 @@ static void mcf_fec_write(void *opaque, hwaddr addr,
         s->tx_descriptor = s->etdsr;
         break;
     case 0x188:
-        s->emrbr = value & 0x7f0;
+        s->emrbr = value > 0 ? value & 0x7F0 : 0x7F0;
         break;
     default:
         hw_error("mcf_fec_write Bad address 0x%x\n", (int)addr);

hw/ppc/spapr.c

@@ -2290,6 +2290,11 @@ static void spapr_add_lmbs(DeviceState *dev, uint64_t addr_start, uint64_t size,
         drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc);
         drck->attach(drc, dev, fdt, fdt_offset, !dev->hotplugged, errp);
         addr += SPAPR_MEMORY_BLOCK_SIZE;
+        if (!dev->hotplugged) {
+            /* guests expect coldplugged LMBs to be pre-allocated */
+            drck->set_allocation_state(drc, SPAPR_DR_ALLOCATION_STATE_USABLE);
+            drck->set_isolation_state(drc, SPAPR_DR_ISOLATION_STATE_UNISOLATED);
+        }
     }
     /* send hotplug notification to the
      * guest only in case of hotplugged memory

hw/virtio/virtio-crypto.c

@@ -838,7 +838,7 @@ static Property virtio_crypto_properties[] = {
 static void virtio_crypto_get_config(VirtIODevice *vdev, uint8_t *config)
 {
     VirtIOCrypto *c = VIRTIO_CRYPTO(vdev);
-    struct virtio_crypto_config crypto_cfg;
+    struct virtio_crypto_config crypto_cfg = {};
 
     /*
      * Virtio-crypto device conforms to VIRTIO 1.0 which is always LE,

hw/virtio/virtio-pci.c

@@ -1580,7 +1580,8 @@ static void virtio_pci_device_plugged(DeviceState *d, Error **errp)
      * Virtio capabilities present without
      * VIRTIO_F_VERSION_1 confuses guests
      */
-    if (!virtio_has_feature(vdev->host_features, VIRTIO_F_VERSION_1)) {
+    if (!proxy->ignore_backend_features &&
+            !virtio_has_feature(vdev->host_features, VIRTIO_F_VERSION_1)) {
         virtio_pci_disable_modern(proxy);
 
         if (!legacy) {
@@ -1852,6 +1853,8 @@ static Property virtio_pci_properties[] = {
                     VIRTIO_PCI_FLAG_DISABLE_PCIE_BIT, false),
     DEFINE_PROP_BIT("page-per-vq", VirtIOPCIProxy, flags,
                     VIRTIO_PCI_FLAG_PAGE_PER_VQ_BIT, false),
+    DEFINE_PROP_BOOL("x-ignore-backend-features", VirtIOPCIProxy,
+                     ignore_backend_features, false),
     DEFINE_PROP_END_OF_LIST(),
 };
 

hw/virtio/virtio-pci.h

@@ -153,6 +153,7 @@ struct VirtIOPCIProxy {
     int config_cap;
     uint32_t flags;
     bool disable_modern;
+    bool ignore_backend_features;
     OnOffAuto disable_legacy;
     uint32_t class_code;
     uint32_t nvectors;

include/hw/compat.h

@@ -18,6 +18,10 @@
         .driver   = "intel-iommu",\
         .property = "x-buggy-eim",\
         .value    = "true",\
+    },{\
+        .driver   = "virtio-pci",\
+        .property = "x-ignore-backend-features",\
+        .value    = "on",\
     },
 
 #define HW_COMPAT_2_6 \

include/hw/loader.h

@@ -180,7 +180,7 @@ MemoryRegion *rom_add_blob(const char *name, const void *blob, size_t len,
                            size_t max_len, hwaddr addr,
                            const char *fw_file_name,
                            FWCfgReadCallback fw_callback,
-                           void *callback_opaque);
+                           void *callback_opaque, AddressSpace *as);
 int rom_add_elf_program(const char *name, void *data, size_t datasize,
                         size_t romsize, hwaddr addr, AddressSpace *as);
 int rom_check_and_register_reset(void);
@@ -194,7 +194,7 @@ void hmp_info_roms(Monitor *mon, const QDict *qdict);
 #define rom_add_file_fixed(_f, _a, _i)          \
     rom_add_file(_f, NULL, _a, _i, false, NULL, NULL)
 #define rom_add_blob_fixed(_f, _b, _l, _a)      \
-    rom_add_blob(_f, _b, _l, _l, _a, NULL, NULL, NULL)
+    rom_add_blob(_f, _b, _l, _l, _a, NULL, NULL, NULL, NULL)
 #define rom_add_file_mr(_f, _mr, _i)            \
     rom_add_file(_f, NULL, 0, _i, false, _mr, NULL)
 #define rom_add_file_as(_f, _as, _i)            \
@@ -202,7 +202,7 @@ void hmp_info_roms(Monitor *mon, const QDict *qdict);
 #define rom_add_file_fixed_as(_f, _a, _i, _as)          \
     rom_add_file(_f, NULL, _a, _i, false, NULL, _as)
 #define rom_add_blob_fixed_as(_f, _b, _l, _a, _as)      \
-    rom_add_blob(_f, _b, _l, _l, _a, NULL, NULL, _as)
+    rom_add_blob(_f, _b, _l, _l, _a, NULL, NULL, NULL, _as)
 
 #define PC_ROM_MIN_VGA     0xc0000
 #define PC_ROM_MIN_OPTION  0xc8000

po/bg.po

@@ -6,8 +6,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: QEMU 2.6.50\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2016-06-26 10:16+0300\n"
+"Report-Msgid-Bugs-To: qemu-devel@nongnu.org\n"
+"POT-Creation-Date: 2016-12-13 21:46+0000\n"
 "PO-Revision-Date: 2016-06-09 15:54+0300\n"
 "Last-Translator: Alexander Shopov <ash@kambanaria.org>\n"
 "Language-Team: Bulgarian <dict@ludost.net>\n"
@@ -17,74 +17,74 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 
-#: ui/gtk.c:274
+#: ui/gtk.c:275
 msgid " - Press Ctrl+Alt+G to release grab"
 msgstr " — натиснете Ctrl+Alt+G, за да освободите фокуса"
 
-#: ui/gtk.c:278
+#: ui/gtk.c:279
 msgid " [Paused]"
 msgstr " [пауза]"
 
-#: ui/gtk.c:1906
+#: ui/gtk.c:1922
 msgid "_Pause"
 msgstr "_Пауза"
 
-#: ui/gtk.c:1912
+#: ui/gtk.c:1928
 msgid "_Reset"
 msgstr "_Рестартиране"
 
-#: ui/gtk.c:1915
+#: ui/gtk.c:1931
 msgid "Power _Down"
 msgstr "_Изключване"
 
-#: ui/gtk.c:1921
+#: ui/gtk.c:1937
 msgid "_Quit"
 msgstr "_Спиране на програмата"
 
-#: ui/gtk.c:2013
+#: ui/gtk.c:2029
 msgid "_Fullscreen"
 msgstr "На _цял екран"
 
-#: ui/gtk.c:2016
+#: ui/gtk.c:2032
 msgid "_Copy"
 msgstr "_Копиране"
 
-#: ui/gtk.c:2032
+#: ui/gtk.c:2048
 msgid "Zoom _In"
 msgstr "_Увеличаване"
 
-#: ui/gtk.c:2039
+#: ui/gtk.c:2055
 msgid "Zoom _Out"
 msgstr "_Намаляване"
 
-#: ui/gtk.c:2046
+#: ui/gtk.c:2062
 msgid "Best _Fit"
 msgstr "По_местване"
 
-#: ui/gtk.c:2053
+#: ui/gtk.c:2069
 msgid "Zoom To _Fit"
 msgstr "Напас_ване"
 
-#: ui/gtk.c:2059
+#: ui/gtk.c:2075
 msgid "Grab On _Hover"
 msgstr "Прихващане при посо_чване"
 
-#: ui/gtk.c:2062
+#: ui/gtk.c:2078
 msgid "_Grab Input"
 msgstr "Прихващане на _фокуса"
 
-#: ui/gtk.c:2091
+#: ui/gtk.c:2107
 msgid "Show _Tabs"
 msgstr "Подпро_зорци"
 
-#: ui/gtk.c:2094
+#: ui/gtk.c:2110
 msgid "Detach Tab"
 msgstr "Към самостоятелен подпрозорец"
 
-#: ui/gtk.c:2106
+#: ui/gtk.c:2122
 msgid "_Machine"
 msgstr "_Машина"
 
-#: ui/gtk.c:2111
+#: ui/gtk.c:2127
 msgid "_View"
 msgstr "_Изглед"

po/de_DE.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: QEMU 1.4.50\n"
 "Report-Msgid-Bugs-To: qemu-devel@nongnu.org\n"
-"POT-Creation-Date: 2016-04-18 14:50+0100\n"
+"POT-Creation-Date: 2016-12-13 21:46+0000\n"
 "PO-Revision-Date: 2012-02-28 16:00+0100\n"
 "Last-Translator: Kevin Wolf <kwolf@redhat.com>\n"
 "Language-Team: Deutsch <de@li.org>\n"
@@ -16,70 +16,74 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=(n!=1);\n"
 
-#: ui/gtk.c:273
+#: ui/gtk.c:275
 msgid " - Press Ctrl+Alt+G to release grab"
 msgstr " - Strg+Alt+G drücken, um Eingabegeräte freizugeben"
 
-#: ui/gtk.c:277
+#: ui/gtk.c:279
 msgid " [Paused]"
 msgstr " [Angehalten]"
 
-#: ui/gtk.c:1833
+#: ui/gtk.c:1922
 msgid "_Pause"
 msgstr "_Angehalten"
 
-#: ui/gtk.c:1839
+#: ui/gtk.c:1928
 msgid "_Reset"
 msgstr "_Reset"
 
-#: ui/gtk.c:1842
+#: ui/gtk.c:1931
 msgid "Power _Down"
 msgstr "_Herunterfahren"
 
-#: ui/gtk.c:1848
+#: ui/gtk.c:1937
 msgid "_Quit"
 msgstr "_Beenden"
 
-#: ui/gtk.c:1940
+#: ui/gtk.c:2029
 msgid "_Fullscreen"
 msgstr "_Vollbild"
 
-#: ui/gtk.c:1954
+#: ui/gtk.c:2032
+msgid "_Copy"
+msgstr "_Kopieren"
+
+#: ui/gtk.c:2048
 msgid "Zoom _In"
 msgstr "_Heranzoomen"
 
-#: ui/gtk.c:1961
+#: ui/gtk.c:2055
 msgid "Zoom _Out"
 msgstr "_Wegzoomen"
 
-#: ui/gtk.c:1968
+#: ui/gtk.c:2062
 msgid "Best _Fit"
 msgstr "_Einpassen"
 
-#: ui/gtk.c:1975
+#: ui/gtk.c:2069
 msgid "Zoom To _Fit"
 msgstr "Auf _Fenstergröße skalieren"
 
-#: ui/gtk.c:1981
+#: ui/gtk.c:2075
 msgid "Grab On _Hover"
 msgstr "Tastatur _automatisch einfangen"
 
-#: ui/gtk.c:1984
+#: ui/gtk.c:2078
 msgid "_Grab Input"
 msgstr "_Eingabegeräte einfangen"
 
-#: ui/gtk.c:2013
+#: ui/gtk.c:2107
 msgid "Show _Tabs"
 msgstr "Reiter anzeigen"
 
-#: ui/gtk.c:2016
+#: ui/gtk.c:2110
 msgid "Detach Tab"
 msgstr "Reiter abtrennen"
 
-#: ui/gtk.c:2028
+#: ui/gtk.c:2122
 msgid "_Machine"
 msgstr "_Maschine"
 
-#: ui/gtk.c:2033
+#: ui/gtk.c:2127
 msgid "_View"
 msgstr "_Ansicht"

po/fr_FR.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: QEMU 1.4.50\n"
 "Report-Msgid-Bugs-To: qemu-devel@nongnu.org\n"
-"POT-Creation-Date: 2016-04-18 14:50+0100\n"
+"POT-Creation-Date: 2016-12-13 21:46+0000\n"
 "PO-Revision-Date: 2014-07-28 23:25+0200\n"
 "Last-Translator: Aurelien Jarno <aurelien@aurel32.net>\n"
 "Language-Team: French <FR@li.org>\n"
@@ -17,70 +17,74 @@ msgstr ""
 "Plural-Forms: nplurals=2; plural=n != 1;\n"
 "X-Generator: Lokalize 1.4\n"
 
-#: ui/gtk.c:273
+#: ui/gtk.c:275
 msgid " - Press Ctrl+Alt+G to release grab"
 msgstr "- Appuyer sur Ctrl+Alt+G pour arrêter la capture"
 
-#: ui/gtk.c:277
+#: ui/gtk.c:279
 msgid " [Paused]"
 msgstr " [En pause]"
 
-#: ui/gtk.c:1833
+#: ui/gtk.c:1922
 msgid "_Pause"
 msgstr "_Pause"
 
-#: ui/gtk.c:1839
+#: ui/gtk.c:1928
 msgid "_Reset"
 msgstr "_Réinitialiser"
 
-#: ui/gtk.c:1842
+#: ui/gtk.c:1931
 msgid "Power _Down"
 msgstr "_Éteindre"
 
-#: ui/gtk.c:1848
+#: ui/gtk.c:1937
 msgid "_Quit"
 msgstr "_Quitter"
 
-#: ui/gtk.c:1940
+#: ui/gtk.c:2029
 msgid "_Fullscreen"
 msgstr "Mode _plein écran"
 
-#: ui/gtk.c:1954
+#: ui/gtk.c:2032
+msgid "_Copy"
+msgstr "_Copier"
+
+#: ui/gtk.c:2048
 msgid "Zoom _In"
 msgstr "Zoom _avant"
 
-#: ui/gtk.c:1961
+#: ui/gtk.c:2055
 msgid "Zoom _Out"
 msgstr "_Zoom arrière"
 
-#: ui/gtk.c:1968
+#: ui/gtk.c:2062
 msgid "Best _Fit"
 msgstr "Zoom _idéal"
 
-#: ui/gtk.c:1975
+#: ui/gtk.c:2069
 msgid "Zoom To _Fit"
 msgstr "Zoomer pour a_juster"
 
-#: ui/gtk.c:1981
+#: ui/gtk.c:2075
 msgid "Grab On _Hover"
 msgstr "Capturer en _survolant"
 
-#: ui/gtk.c:1984
+#: ui/gtk.c:2078
 msgid "_Grab Input"
 msgstr "_Capturer les entrées"
 
-#: ui/gtk.c:2013
+#: ui/gtk.c:2107
 msgid "Show _Tabs"
 msgstr "Montrer les _onglets"
 
-#: ui/gtk.c:2016
+#: ui/gtk.c:2110
 msgid "Detach Tab"
 msgstr "_Détacher l'onglet"
 
-#: ui/gtk.c:2028
+#: ui/gtk.c:2122
 msgid "_Machine"
 msgstr "_Machine"
 
-#: ui/gtk.c:2033
+#: ui/gtk.c:2127
 msgid "_View"
 msgstr "_Vue"

po/hu.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: QEMU 1.4.50\n"
 "Report-Msgid-Bugs-To: qemu-devel@nongnu.org\n"
-"POT-Creation-Date: 2016-04-18 14:50+0100\n"
+"POT-Creation-Date: 2016-12-13 21:46+0000\n"
 "PO-Revision-Date: 2013-05-06 20:42+0200\n"
 "Last-Translator: Ákos Kovács <akoskovacs@gmx.com>\n"
 "Language-Team: Hungarian <hu@li.org>\n"
@@ -15,73 +15,77 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 
-#: ui/gtk.c:273
+#: ui/gtk.c:275
 msgid " - Press Ctrl+Alt+G to release grab"
 msgstr " - Nyomj Ctrl+Alt+G-t a bemeneti eszközök elengedéséhez"
 
-#: ui/gtk.c:277
+#: ui/gtk.c:279
 msgid " [Paused]"
 msgstr " [Megállítva]"
 
-#: ui/gtk.c:1833
+#: ui/gtk.c:1922
 msgid "_Pause"
 msgstr "_Megállítás"
 
-#: ui/gtk.c:1839
+#: ui/gtk.c:1928
 msgid "_Reset"
 msgstr "Új_raindítás"
 
-#: ui/gtk.c:1842
+#: ui/gtk.c:1931
 msgid "Power _Down"
 msgstr "_Leállítás"
 
-#: ui/gtk.c:1848
+#: ui/gtk.c:1937
 msgid "_Quit"
 msgstr ""
 
-#: ui/gtk.c:1940
+#: ui/gtk.c:2029
 msgid "_Fullscreen"
 msgstr ""
 
-#: ui/gtk.c:1954
+#: ui/gtk.c:2032
+msgid "_Copy"
+msgstr ""
+
+#: ui/gtk.c:2048
 #, fuzzy
 msgid "Zoom _In"
 msgstr "Ablakmérethez _igazítás"
 
-#: ui/gtk.c:1961
+#: ui/gtk.c:2055
 #, fuzzy
 msgid "Zoom _Out"
 msgstr "Ablakmérethez _igazítás"
 
-#: ui/gtk.c:1968
+#: ui/gtk.c:2062
 msgid "Best _Fit"
 msgstr ""
 
-#: ui/gtk.c:1975
+#: ui/gtk.c:2069
 msgid "Zoom To _Fit"
 msgstr "Ablakmérethez _igazítás"
 
-#: ui/gtk.c:1981
+#: ui/gtk.c:2075
 msgid "Grab On _Hover"
 msgstr "Automatikus _elfogás"
 
-#: ui/gtk.c:1984
+#: ui/gtk.c:2078
 msgid "_Grab Input"
 msgstr "_Bemeneti eszközök megragadása"
 
-#: ui/gtk.c:2013
+#: ui/gtk.c:2107
 msgid "Show _Tabs"
 msgstr "_Fülek megjelenítése"
 
-#: ui/gtk.c:2016
+#: ui/gtk.c:2110
 msgid "Detach Tab"
 msgstr ""
 
-#: ui/gtk.c:2028
+#: ui/gtk.c:2122
 msgid "_Machine"
 msgstr "_Gép"
 
-#: ui/gtk.c:2033
+#: ui/gtk.c:2127
 msgid "_View"
 msgstr "_Nézet"
 

po/it.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: QEMU 1.4.50\n"
 "Report-Msgid-Bugs-To: qemu-devel@nongnu.org\n"
-"POT-Creation-Date: 2016-04-18 14:50+0100\n"
+"POT-Creation-Date: 2016-12-13 21:46+0000\n"
 "PO-Revision-Date: 2014-07-29 08:25+0200\n"
 "Last-Translator: Paolo Bonzini <pbonzini@redhat.com>\n"
 "Language-Team: Italian <it@li.org>\n"
@@ -16,70 +16,74 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=n != 1;\n"
 
-#: ui/gtk.c:273
+#: ui/gtk.c:275
 msgid " - Press Ctrl+Alt+G to release grab"
 msgstr " - Premere Ctrl+Alt+G per rilasciare l'input"
 
-#: ui/gtk.c:277
+#: ui/gtk.c:279
 msgid " [Paused]"
 msgstr " [Pausa]"
 
-#: ui/gtk.c:1833
+#: ui/gtk.c:1922
 msgid "_Pause"
 msgstr "_Pausa"
 
-#: ui/gtk.c:1839
+#: ui/gtk.c:1928
 msgid "_Reset"
 msgstr "_Reset"
 
-#: ui/gtk.c:1842
+#: ui/gtk.c:1931
 msgid "Power _Down"
 msgstr "_Spegni"
 
-#: ui/gtk.c:1848
+#: ui/gtk.c:1937
 msgid "_Quit"
 msgstr "_Esci"
 
-#: ui/gtk.c:1940
+#: ui/gtk.c:2029
 msgid "_Fullscreen"
-msgstr ""
+msgstr "A t_utto schermo"
 
-#: ui/gtk.c:1954
+#: ui/gtk.c:2032
+msgid "_Copy"
+msgstr "_Copia"
+
+#: ui/gtk.c:2048
 msgid "Zoom _In"
 msgstr "_Aumenta zoom"
 
-#: ui/gtk.c:1961
+#: ui/gtk.c:2055
 msgid "Zoom _Out"
 msgstr "_Riduci zoom"
 
-#: ui/gtk.c:1968
+#: ui/gtk.c:2062
 msgid "Best _Fit"
 msgstr "A_nnulla zoom"
 
-#: ui/gtk.c:1975
+#: ui/gtk.c:2069
 msgid "Zoom To _Fit"
 msgstr "Adatta alla _finestra"
 
-#: ui/gtk.c:1981
+#: ui/gtk.c:2075
 msgid "Grab On _Hover"
 msgstr "Cattura _automatica input"
 
-#: ui/gtk.c:1984
+#: ui/gtk.c:2078
 msgid "_Grab Input"
 msgstr "_Cattura input"
 
-#: ui/gtk.c:2013
+#: ui/gtk.c:2107
 msgid "Show _Tabs"
 msgstr "Mostra _tab"
 
-#: ui/gtk.c:2016
+#: ui/gtk.c:2110
 msgid "Detach Tab"
 msgstr "_Sposta in una nuova finestra"
 
-#: ui/gtk.c:2028
+#: ui/gtk.c:2122
 msgid "_Machine"
 msgstr "_Macchina virtuale"
 
-#: ui/gtk.c:2033
+#: ui/gtk.c:2127
 msgid "_View"
 msgstr "_Visualizza"

po/messages.po

@@ -5,9 +5,9 @@
 #, fuzzy
 msgid ""
 msgstr ""
-"Project-Id-Version: QEMU 2.5.92\n"
+"Project-Id-Version: QEMU 2.7.93\n"
 "Report-Msgid-Bugs-To: qemu-devel@nongnu.org\n"
-"POT-Creation-Date: 2016-04-18 14:50+0100\n"
+"POT-Creation-Date: 2016-12-13 21:46+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -16,70 +16,74 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 
-#: ui/gtk.c:273
+#: ui/gtk.c:275
 msgid " - Press Ctrl+Alt+G to release grab"
 msgstr ""
 
-#: ui/gtk.c:277
+#: ui/gtk.c:279
 msgid " [Paused]"
 msgstr ""
 
-#: ui/gtk.c:1833
+#: ui/gtk.c:1922
 msgid "_Pause"
 msgstr ""
 
-#: ui/gtk.c:1839
+#: ui/gtk.c:1928
 msgid "_Reset"
 msgstr ""
 
-#: ui/gtk.c:1842
+#: ui/gtk.c:1931
 msgid "Power _Down"
 msgstr ""
 
-#: ui/gtk.c:1848
+#: ui/gtk.c:1937
 msgid "_Quit"
 msgstr ""
 
-#: ui/gtk.c:1940
+#: ui/gtk.c:2029
 msgid "_Fullscreen"
 msgstr ""
 
-#: ui/gtk.c:1954
+#: ui/gtk.c:2032
+msgid "_Copy"
+msgstr ""
+
+#: ui/gtk.c:2048
 msgid "Zoom _In"
 msgstr ""
 
-#: ui/gtk.c:1961
+#: ui/gtk.c:2055
 msgid "Zoom _Out"
 msgstr ""
 
-#: ui/gtk.c:1968
+#: ui/gtk.c:2062
 msgid "Best _Fit"
 msgstr ""
 
-#: ui/gtk.c:1975
+#: ui/gtk.c:2069
 msgid "Zoom To _Fit"
 msgstr ""
 
-#: ui/gtk.c:1981
+#: ui/gtk.c:2075
 msgid "Grab On _Hover"
 msgstr ""
 
-#: ui/gtk.c:1984
+#: ui/gtk.c:2078
 msgid "_Grab Input"
 msgstr ""
 
-#: ui/gtk.c:2013
+#: ui/gtk.c:2107
 msgid "Show _Tabs"
 msgstr ""
 
-#: ui/gtk.c:2016
+#: ui/gtk.c:2110
 msgid "Detach Tab"
 msgstr ""
 
-#: ui/gtk.c:2028
+#: ui/gtk.c:2122
 msgid "_Machine"
 msgstr ""
 
-#: ui/gtk.c:2033
+#: ui/gtk.c:2127
 msgid "_View"
 msgstr ""

po/tr.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: QEMU 1.4.50\n"
 "Report-Msgid-Bugs-To: qemu-devel@nongnu.org\n"
-"POT-Creation-Date: 2016-04-18 14:50+0100\n"
+"POT-Creation-Date: 2016-12-13 21:46+0000\n"
 "PO-Revision-Date: 2013-04-22 18:35+0300\n"
 "Last-Translator: Ozan Çağlayan <ozancag@gmail.com>\n"
 "Language-Team: Türkçe <>\n"
@@ -17,72 +17,76 @@ msgstr ""
 "Plural-Forms: nplurals=1; plural=0;\n"
 "X-Generator: Gtranslator 2.91.6\n"
 
-#: ui/gtk.c:273
+#: ui/gtk.c:275
 msgid " - Press Ctrl+Alt+G to release grab"
 msgstr " - Yakalamayı durdurmak için Ctrl+Alt+G tuşlarına basın"
 
-#: ui/gtk.c:277
+#: ui/gtk.c:279
 msgid " [Paused]"
 msgstr " [Duraklatıldı]"
 
-#: ui/gtk.c:1833
+#: ui/gtk.c:1922
 msgid "_Pause"
 msgstr "_Duraklat"
 
-#: ui/gtk.c:1839
+#: ui/gtk.c:1928
 msgid "_Reset"
 msgstr "_Sıfırla"
 
-#: ui/gtk.c:1842
+#: ui/gtk.c:1931
 msgid "Power _Down"
 msgstr "_Kapat"
 
-#: ui/gtk.c:1848
+#: ui/gtk.c:1937
 msgid "_Quit"
 msgstr ""
 
-#: ui/gtk.c:1940
+#: ui/gtk.c:2029
 msgid "_Fullscreen"
 msgstr ""
 
-#: ui/gtk.c:1954
+#: ui/gtk.c:2032
+msgid "_Copy"
+msgstr ""
+
+#: ui/gtk.c:2048
 #, fuzzy
 msgid "Zoom _In"
 msgstr "Yakınlaş ve Sığ_dır"
 
-#: ui/gtk.c:1961
+#: ui/gtk.c:2055
 #, fuzzy
 msgid "Zoom _Out"
 msgstr "Yakınlaş ve Sığ_dır"
 
-#: ui/gtk.c:1968
+#: ui/gtk.c:2062
 msgid "Best _Fit"
 msgstr ""
 
-#: ui/gtk.c:1975
+#: ui/gtk.c:2069
 msgid "Zoom To _Fit"
 msgstr "Yakınlaş ve Sığ_dır"
 
-#: ui/gtk.c:1981
+#: ui/gtk.c:2075
 msgid "Grab On _Hover"
 msgstr "Ü_zerindeyken Yakala"
 
-#: ui/gtk.c:1984
+#: ui/gtk.c:2078
 msgid "_Grab Input"
 msgstr "Girdiyi _Yakala"
 
-#: ui/gtk.c:2013
+#: ui/gtk.c:2107
 msgid "Show _Tabs"
 msgstr "Se_kmeleri Göster"
 
-#: ui/gtk.c:2016
+#: ui/gtk.c:2110
 msgid "Detach Tab"
 msgstr ""
 
-#: ui/gtk.c:2028
+#: ui/gtk.c:2122
 msgid "_Machine"
 msgstr "_Makine"
 
-#: ui/gtk.c:2033
+#: ui/gtk.c:2127
 msgid "_View"
 msgstr "_Görüntüle"

po/zh_CN.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: QEMU 2.2\n"
 "Report-Msgid-Bugs-To: qemu-devel@nongnu.org\n"
-"POT-Creation-Date: 2016-04-18 14:50+0100\n"
+"POT-Creation-Date: 2016-12-13 21:46+0000\n"
 "PO-Revision-Date: 2014-07-31 10:00+0800\n"
 "Last-Translator: Fam Zheng <famz@redhat.com>\n"
 "Language-Team: Chinese <zh@li.org>\n"
@@ -17,70 +17,74 @@ msgstr ""
 "Plural-Forms: nplurals=2; plural=n != 1;\n"
 "X-Generator: Lokalize 1.4\n"
 
-#: ui/gtk.c:273
+#: ui/gtk.c:275
 msgid " - Press Ctrl+Alt+G to release grab"
 msgstr " - 按下 Ctrl+Alt+G 取消捕获"
 
-#: ui/gtk.c:277
+#: ui/gtk.c:279
 msgid " [Paused]"
 msgstr " [已暂停]"
 
-#: ui/gtk.c:1833
+#: ui/gtk.c:1922
 msgid "_Pause"
 msgstr "暂停(_P)"
 
-#: ui/gtk.c:1839
+#: ui/gtk.c:1928
 msgid "_Reset"
 msgstr "重置(_R)"
 
-#: ui/gtk.c:1842
+#: ui/gtk.c:1931
 msgid "Power _Down"
 msgstr "关闭电源(_D)"
 
-#: ui/gtk.c:1848
+#: ui/gtk.c:1937
 msgid "_Quit"
 msgstr "退出(_Q)"
 
-#: ui/gtk.c:1940
+#: ui/gtk.c:2029
 msgid "_Fullscreen"
 msgstr "全屏(_F)"
 
-#: ui/gtk.c:1954
+#: ui/gtk.c:2032
+msgid "_Copy"
+msgstr "复制(_C)"
+
+#: ui/gtk.c:2048
 msgid "Zoom _In"
 msgstr "放大(_I)"
 
-#: ui/gtk.c:1961
+#: ui/gtk.c:2055
 msgid "Zoom _Out"
 msgstr "缩小(_O)"
 
-#: ui/gtk.c:1968
+#: ui/gtk.c:2062
 msgid "Best _Fit"
 msgstr "最合适大小(_F)"
 
-#: ui/gtk.c:1975
+#: ui/gtk.c:2069
 msgid "Zoom To _Fit"
 msgstr "缩放以适应大小(_F)"
 
-#: ui/gtk.c:1981
+#: ui/gtk.c:2075
 msgid "Grab On _Hover"
 msgstr "鼠标经过时捕获(_H)"
 
-#: ui/gtk.c:1984
+#: ui/gtk.c:2078
 msgid "_Grab Input"
 msgstr "捕获输入(_G)"
 
-#: ui/gtk.c:2013
+#: ui/gtk.c:2107
 msgid "Show _Tabs"
 msgstr "显示标签页(_T)"
 
-#: ui/gtk.c:2016
+#: ui/gtk.c:2110
 msgid "Detach Tab"
 msgstr "分离标签页"
 
-#: ui/gtk.c:2028
+#: ui/gtk.c:2122
 msgid "_Machine"
 msgstr "虚拟机(_M)"
 
-#: ui/gtk.c:2033
+#: ui/gtk.c:2127
 msgid "_View"
 msgstr "视图(_V)"

qapi/block-core.json

@@ -6,7 +6,7 @@
 { 'include': 'common.json' }
 
 ##
-# @SnapshotInfo
+# @SnapshotInfo:
 #
 # @id: unique snapshot id
 #
@@ -213,7 +213,7 @@
            '*filename': 'str' } }
 
 ##
-# @BlockdevCacheInfo
+# @BlockdevCacheInfo:
 #
 # Cache mode information for a block device
 #
@@ -378,7 +378,7 @@
 # @offset: if present, the image file stores the data for this range in
 #          raw format at the given offset.
 #
-# Since 1.7
+# Since: 1.7
 ##
 { 'struct': 'BlockDeviceMapEntry',
   'data': { 'start': 'int', 'length': 'int', 'depth': 'int', 'zero': 'bool',
@@ -790,7 +790,7 @@
                                       '*node-name': 'str', 'password': 'str'} }
 
 ##
-# @block_resize
+# @block_resize:
 #
 # Resize a block image while a guest is running.
 #
@@ -812,7 +812,7 @@
                                        'size': 'int' }}
 
 ##
-# @NewImageMode
+# @NewImageMode:
 #
 # An enumeration that tells QEMU how to set the backing file path in
 # a new image file.
@@ -829,7 +829,7 @@
   'data': [ 'existing', 'absolute-paths' ] }
 
 ##
-# @BlockdevSnapshotSync
+# @BlockdevSnapshotSync:
 #
 # Either @device or @node-name must be set but not both.
 #
@@ -852,7 +852,7 @@
             '*format': 'str', '*mode': 'NewImageMode' } }
 
 ##
-# @BlockdevSnapshot
+# @BlockdevSnapshot:
 #
 # @node: device or node name that will have a snapshot created.
 #
@@ -861,13 +861,13 @@
 #           It must not have a current backing file (this can be
 #           achieved by passing "backing": "" to blockdev-add).
 #
-# Since 2.5
+# Since: 2.5
 ##
 { 'struct': 'BlockdevSnapshot',
   'data': { 'node': 'str', 'overlay': 'str' } }
 
 ##
-# @DriveBackup
+# @DriveBackup:
 #
 # @job-id: #optional identifier for the newly-created block job. If
 #          omitted, the device name will be used. (Since 2.7)
@@ -905,9 +905,9 @@
 #                   default 'report' (no limitations, since this applies to
 #                   a different block device than @device).
 #
-# Note that @on-source-error and @on-target-error only affect background I/O.
-# If an error occurs during a guest write request, the device's rerror/werror
-# actions will be used.
+# Note: @on-source-error and @on-target-error only affect background
+# I/O.  If an error occurs during a guest write request, the device's
+# rerror/werror actions will be used.
 #
 # Since: 1.6
 ##
@@ -919,7 +919,7 @@
             '*on-target-error': 'BlockdevOnError' } }
 
 ##
-# @BlockdevBackup
+# @BlockdevBackup:
 #
 # @job-id: #optional identifier for the newly-created block job. If
 #          omitted, the device name will be used. (Since 2.7)
@@ -946,9 +946,9 @@
 #                   default 'report' (no limitations, since this applies to
 #                   a different block device than @device).
 #
-# Note that @on-source-error and @on-target-error only affect background I/O.
-# If an error occurs during a guest write request, the device's rerror/werror
-# actions will be used.
+# Note: @on-source-error and @on-target-error only affect background
+# I/O.  If an error occurs during a guest write request, the device's
+# rerror/werror actions will be used.
 #
 # Since: 2.3
 ##
@@ -961,7 +961,7 @@
             '*on-target-error': 'BlockdevOnError' } }
 
 ##
-# @blockdev-snapshot-sync
+# @blockdev-snapshot-sync:
 #
 # Generates a synchronous snapshot of a block device.
 #
@@ -970,26 +970,26 @@
 # Returns: nothing on success
 #          If @device is not a valid block device, DeviceNotFound
 #
-# Since 0.14.0
+# Since: 0.14.0
 ##
 { 'command': 'blockdev-snapshot-sync',
   'data': 'BlockdevSnapshotSync' }
 
 
 ##
-# @blockdev-snapshot
+# @blockdev-snapshot:
 #
 # Generates a snapshot of a block device.
 #
 # For the arguments, see the documentation of BlockdevSnapshot.
 #
-# Since 2.5
+# Since: 2.5
 ##
 { 'command': 'blockdev-snapshot',
   'data': 'BlockdevSnapshot' }
 
 ##
-# @change-backing-file
+# @change-backing-file:
 #
 # Change the backing file in the image file metadata.  This does not
 # cause QEMU to reopen the image file to reparse the backing filename
@@ -1016,7 +1016,7 @@
             'backing-file': 'str' } }
 
 ##
-# @block-commit
+# @block-commit:
 #
 # Live commit of data from overlay image nodes into backing nodes - i.e.,
 # writes data between 'top' and 'base' into 'base'.
@@ -1079,7 +1079,7 @@
             '*backing-file': 'str', '*speed': 'int' } }
 
 ##
-# @drive-backup
+# @drive-backup:
 #
 # Start a point-in-time copy of a block device to a new destination.  The
 # status of ongoing drive-backup operations can be checked with
@@ -1092,13 +1092,13 @@
 # Returns: nothing on success
 #          If @device is not a valid block device, GenericError
 #
-# Since 1.6
+# Since: 1.6
 ##
 { 'command': 'drive-backup', 'boxed': true,
   'data': 'DriveBackup' }
 
 ##
-# @blockdev-backup
+# @blockdev-backup:
 #
 # Start a point-in-time copy of a block device to a new destination.  The
 # status of ongoing blockdev-backup operations can be checked with
@@ -1111,25 +1111,25 @@
 # Returns: nothing on success
 #          If @device is not a valid block device, DeviceNotFound
 #
-# Since 2.3
+# Since: 2.3
 ##
 { 'command': 'blockdev-backup', 'boxed': true,
   'data': 'BlockdevBackup' }
 
 
 ##
-# @query-named-block-nodes
+# @query-named-block-nodes:
 #
 # Get the named block driver list
 #
 # Returns: the list of BlockDeviceInfo
 #
-# Since 2.0
+# Since: 2.0
 ##
 { 'command': 'query-named-block-nodes', 'returns': [ 'BlockDeviceInfo' ] }
 
 ##
-# @drive-mirror
+# @drive-mirror:
 #
 # Start mirroring a block device's writes to a new destination.
 #
@@ -1138,13 +1138,13 @@
 # Returns: nothing on success
 #          If @device is not a valid block device, GenericError
 #
-# Since 1.3
+# Since: 1.3
 ##
 { 'command': 'drive-mirror', 'boxed': true,
   'data': 'DriveMirror' }
 
 ##
-# DriveMirror
+# @DriveMirror:
 #
 # A set of parameters describing drive mirror setup.
 #
@@ -1198,7 +1198,7 @@
 #         written. Both will result in identical contents.
 #         Default is true. (Since 2.4)
 #
-# Since 1.3
+# Since: 1.3
 ##
 { 'struct': 'DriveMirror',
   'data': { '*job-id': 'str', 'device': 'str', 'target': 'str',
@@ -1210,19 +1210,19 @@
             '*unmap': 'bool' } }
 
 ##
-# @BlockDirtyBitmap
+# @BlockDirtyBitmap:
 #
 # @node: name of device/node which the bitmap is tracking
 #
 # @name: name of the dirty bitmap
 #
-# Since 2.4
+# Since: 2.4
 ##
 { 'struct': 'BlockDirtyBitmap',
   'data': { 'node': 'str', 'name': 'str' } }
 
 ##
-# @BlockDirtyBitmapAdd
+# @BlockDirtyBitmapAdd:
 #
 # @node: name of device/node which the bitmap is tracking
 #
@@ -1231,13 +1231,13 @@
 # @granularity: #optional the bitmap granularity, default is 64k for
 #               block-dirty-bitmap-add
 #
-# Since 2.4
+# Since: 2.4
 ##
 { 'struct': 'BlockDirtyBitmapAdd',
   'data': { 'node': 'str', 'name': 'str', '*granularity': 'uint32' } }
 
 ##
-# @block-dirty-bitmap-add
+# @block-dirty-bitmap-add:
 #
 # Create a dirty bitmap with a name on the node
 #
@@ -1245,13 +1245,13 @@
 #          If @node is not a valid block device or node, DeviceNotFound
 #          If @name is already taken, GenericError with an explanation
 #
-# Since 2.4
+# Since: 2.4
 ##
 { 'command': 'block-dirty-bitmap-add',
   'data': 'BlockDirtyBitmapAdd' }
 
 ##
-# @block-dirty-bitmap-remove
+# @block-dirty-bitmap-remove:
 #
 # Remove a dirty bitmap on the node
 #
@@ -1260,13 +1260,13 @@
 #          If @name is not found, GenericError with an explanation
 #          if @name is frozen by an operation, GenericError
 #
-# Since 2.4
+# Since: 2.4
 ##
 { 'command': 'block-dirty-bitmap-remove',
   'data': 'BlockDirtyBitmap' }
 
 ##
-# @block-dirty-bitmap-clear
+# @block-dirty-bitmap-clear:
 #
 # Clear (reset) a dirty bitmap on the device
 #
@@ -1274,13 +1274,13 @@
 #          If @node is not a valid block device, DeviceNotFound
 #          If @name is not found, GenericError with an explanation
 #
-# Since 2.4
+# Since: 2.4
 ##
 { 'command': 'block-dirty-bitmap-clear',
   'data': 'BlockDirtyBitmap' }
 
 ##
-# @blockdev-mirror
+# @blockdev-mirror:
 #
 # Start mirroring a block device's writes to a new destination.
 #
@@ -1321,7 +1321,7 @@
 #
 # Returns: nothing on success.
 #
-# Since 2.6
+# Since: 2.6
 ##
 { 'command': 'blockdev-mirror',
   'data': { '*job-id': 'str', 'device': 'str', 'target': 'str',
@@ -1368,7 +1368,7 @@
   'data': 'BlockIOThrottle' }
 
 ##
-# BlockIOThrottle
+# @BlockIOThrottle:
 #
 # A set of parameters describing block throttling.
 #
@@ -1650,7 +1650,7 @@
 { 'command': 'block-job-complete', 'data': { 'device': 'str' } }
 
 ##
-# @BlockdevDiscardOptions
+# @BlockdevDiscardOptions:
 #
 # Determines how to handle discard requests.
 #
@@ -1663,7 +1663,7 @@
   'data': [ 'ignore', 'unmap' ] }
 
 ##
-# @BlockdevDetectZeroesOptions
+# @BlockdevDetectZeroesOptions:
 #
 # Describes the operation mode for the automatic conversion of plain
 # zero writes by the OS to driver specific optimized zero write commands.
@@ -1679,7 +1679,7 @@
   'data': [ 'off', 'on', 'unmap' ] }
 
 ##
-# @BlockdevAioOptions
+# @BlockdevAioOptions:
 #
 # Selects the AIO backend to handle I/O requests
 #
@@ -1692,7 +1692,7 @@
   'data': [ 'threads', 'native' ] }
 
 ##
-# @BlockdevCacheOptions
+# @BlockdevCacheOptions:
 #
 # Includes cache-related options for block devices
 #
@@ -1708,13 +1708,17 @@
             '*no-flush': 'bool' } }
 
 ##
-# @BlockdevDriver
+# @BlockdevDriver:
 #
 # Drivers that are supported in block device operations.
 #
-# @host_device, @host_cdrom: Since 2.1
+# @host_device: Since 2.1
+# @host_cdrom: Since 2.1
 # @gluster: Since 2.7
-# @nbd, @nfs, @replication, @ssh: Since 2.8
+# @nbd: Since 2.8
+# @nfs: Since 2.8
+# @replication: Since 2.8
+# @ssh: Since 2.8
 #
 # Since: 2.0
 ##
@@ -1727,7 +1731,7 @@
             'vvfat' ] }
 
 ##
-# @BlockdevOptionsFile
+# @BlockdevOptionsFile:
 #
 # Driver specific block device options for the file backend.
 #
@@ -1741,7 +1745,7 @@
             '*aio': 'BlockdevAioOptions' } }
 
 ##
-# @BlockdevOptionsNull
+# @BlockdevOptionsNull:
 #
 # Driver specific block device options for the null backend.
 #
@@ -1756,7 +1760,7 @@
   'data': { '*size': 'int', '*latency-ns': 'uint64' } }
 
 ##
-# @BlockdevOptionsVVFAT
+# @BlockdevOptionsVVFAT:
 #
 # Driver specific block device options for the vvfat protocol.
 #
@@ -1777,7 +1781,7 @@
             '*label': 'str', '*rw': 'bool' } }
 
 ##
-# @BlockdevOptionsGenericFormat
+# @BlockdevOptionsGenericFormat:
 #
 # Driver specific block device options for image format that have no option
 # besides their data source.
@@ -1790,7 +1794,7 @@
   'data': { 'file': 'BlockdevRef' } }
 
 ##
-# @BlockdevOptionsLUKS
+# @BlockdevOptionsLUKS:
 #
 # Driver specific block device options for LUKS.
 #
@@ -1806,7 +1810,7 @@
 
 
 ##
-# @BlockdevOptionsGenericCOWFormat
+# @BlockdevOptionsGenericCOWFormat:
 #
 # Driver specific block device options for image format that have no option
 # besides their data source and an optional backing file.
@@ -1823,7 +1827,7 @@
   'data': { '*backing': 'BlockdevRef' } }
 
 ##
-# @Qcow2OverlapCheckMode
+# @Qcow2OverlapCheckMode:
 #
 # General overlap check modes.
 #
@@ -1843,7 +1847,7 @@
   'data': [ 'none', 'constant', 'cached', 'all' ] }
 
 ##
-# @Qcow2OverlapCheckFlags
+# @Qcow2OverlapCheckFlags:
 #
 # Structure of flags for each metadata structure. Setting a field to 'true'
 # makes qemu guard that structure against unintended overwriting. The default
@@ -1866,7 +1870,7 @@
             '*inactive-l2':    'bool' } }
 
 ##
-# @Qcow2OverlapChecks
+# @Qcow2OverlapChecks:
 #
 # Specifies which metadata structures should be guarded against unintended
 # overwriting.
@@ -1883,7 +1887,7 @@
             'mode':  'Qcow2OverlapCheckMode' } }
 
 ##
-# @BlockdevOptionsQcow2
+# @BlockdevOptionsQcow2:
 #
 # Driver specific block device options for qcow2.
 #
@@ -1933,7 +1937,7 @@
 
 
 ##
-# @BlockdevOptionsArchipelago
+# @BlockdevOptionsArchipelago:
 #
 # Driver specific block device options for Archipelago.
 #
@@ -1962,7 +1966,7 @@
             '*segment': 'str' } }
 
 ##
-# @BlockdevOptionsSsh
+# @BlockdevOptionsSsh:
 #
 # @server:              host address
 #
@@ -1973,7 +1977,7 @@
 #
 # TODO: Expose the host_key_check option in QMP
 #
-# Since 2.8
+# Since: 2.8
 ##
 { 'struct': 'BlockdevOptionsSsh',
   'data': { 'server': 'InetSocketAddress',
@@ -1982,7 +1986,7 @@
 
 
 ##
-# @BlkdebugEvent
+# @BlkdebugEvent:
 #
 # Trigger events supported by blkdebug.
 #
@@ -2005,7 +2009,7 @@
             'pwritev_zero', 'pwritev_done', 'empty_image_prepare' ] }
 
 ##
-# @BlkdebugInjectErrorOptions
+# @BlkdebugInjectErrorOptions:
 #
 # Describes a single error injection for blkdebug.
 #
@@ -2037,7 +2041,7 @@
             '*immediately': 'bool' } }
 
 ##
-# @BlkdebugSetStateOptions
+# @BlkdebugSetStateOptions:
 #
 # Describes a single state-change event for blkdebug.
 #
@@ -2057,7 +2061,7 @@
             'new_state': 'int' } }
 
 ##
-# @BlockdevOptionsBlkdebug
+# @BlockdevOptionsBlkdebug:
 #
 # Driver specific block device options for blkdebug.
 #
@@ -2082,7 +2086,7 @@
             '*set-state': ['BlkdebugSetStateOptions'] } }
 
 ##
-# @BlockdevOptionsBlkverify
+# @BlockdevOptionsBlkverify:
 #
 # Driver specific block device options for blkverify.
 #
@@ -2097,7 +2101,7 @@
             'raw': 'BlockdevRef' } }
 
 ##
-# @QuorumReadPattern
+# @QuorumReadPattern:
 #
 # An enumeration of quorum read patterns.
 #
@@ -2110,7 +2114,7 @@
 { 'enum': 'QuorumReadPattern', 'data': [ 'quorum', 'fifo' ] }
 
 ##
-# @BlockdevOptionsQuorum
+# @BlockdevOptionsQuorum:
 #
 # Driver specific block device options for Quorum
 #
@@ -2137,7 +2141,7 @@
             '*read-pattern': 'QuorumReadPattern' } }
 
 ##
-# @GlusterTransport
+# @GlusterTransport:
 #
 # An enumeration of Gluster transport types
 #
@@ -2152,7 +2156,7 @@
 
 
 ##
-# @GlusterServer
+# @GlusterServer:
 #
 # Captures the address of a socket
 #
@@ -2160,10 +2164,6 @@
 #
 # @type:       Transport type used for gluster connection
 #
-# @unix:       socket file
-#
-# @tcp:        host address and port number
-#
 # This is similar to SocketAddress, only distinction:
 #
 # 1. GlusterServer is a flat union, SocketAddress is a simple union.
@@ -2185,7 +2185,7 @@
             'tcp': 'InetSocketAddress' } }
 
 ##
-# @BlockdevOptionsGluster
+# @BlockdevOptionsGluster:
 #
 # Driver specific block device options for Gluster
 #
@@ -2195,7 +2195,8 @@
 #
 # @server:      gluster servers description
 #
-# @debug-level: #optional libgfapi log level (default '4' which is Error)
+# @debug:       #optional libgfapi log level (default '4' which is Error)
+#               (Since 2.8)
 #
 # @logfile:     #optional libgfapi log file (default /dev/stderr) (Since 2.8)
 #
@@ -2205,11 +2206,11 @@
   'data': { 'volume': 'str',
             'path': 'str',
             'server': ['GlusterServer'],
-            '*debug-level': 'int',
+            '*debug': 'int',
             '*logfile': 'str' } }
 
 ##
-# @ReplicationMode
+# @ReplicationMode:
 #
 # An enumeration of replication modes.
 #
@@ -2222,7 +2223,7 @@
 { 'enum' : 'ReplicationMode', 'data' : [ 'primary', 'secondary' ] }
 
 ##
-# @BlockdevOptionsReplication
+# @BlockdevOptionsReplication:
 #
 # Driver specific block device options for replication
 #
@@ -2240,19 +2241,19 @@
             '*top-id': 'str' } }
 
 ##
-# @NFSTransport
+# @NFSTransport:
 #
 # An enumeration of NFS transport types
 #
 # @inet:        TCP transport
 #
-# Since 2.8
+# Since: 2.8
 ##
 { 'enum': 'NFSTransport',
   'data': [ 'inet' ] }
 
 ##
-# @NFSServer
+# @NFSServer:
 #
 # Captures the address of the socket
 #
@@ -2260,14 +2261,14 @@
 #
 # @host:        host address for NFS server
 #
-# Since 2.8
+# Since: 2.8
 ##
 { 'struct': 'NFSServer',
   'data': { 'type': 'NFSTransport',
             'host': 'str' } }
 
 ##
-# @BlockdevOptionsNfs
+# @BlockdevOptionsNfs:
 #
 # Driver specific block device option for NFS
 #
@@ -2292,10 +2293,10 @@
 # @page-cache-size:         #optional set the pagecache size in bytes (defaults
 #                           to libnfs default)
 #
-# @debug-level:             #optional set the NFS debug level (max 2) (defaults
+# @debug:                   #optional set the NFS debug level (max 2) (defaults
 #                           to libnfs default)
 #
-# Since 2.8
+# Since: 2.8
 ##
 { 'struct': 'BlockdevOptionsNfs',
   'data': { 'server': 'NFSServer',
@@ -2305,10 +2306,10 @@
             '*tcp-syn-count': 'int',
             '*readahead-size': 'int',
             '*page-cache-size': 'int',
-            '*debug-level': 'int' } }
+            '*debug': 'int' } }
 
 ##
-# @BlockdevOptionsCurl
+# @BlockdevOptionsCurl:
 #
 # Driver specific block device options for the curl backend.
 #
@@ -2320,7 +2321,7 @@
   'data': { 'filename': 'str' } }
 
 ##
-# @BlockdevOptionsNbd
+# @BlockdevOptionsNbd:
 #
 # Driver specific block device options for NBD.
 #
@@ -2338,7 +2339,7 @@
             '*tls-creds': 'str' } }
 
 ##
-# @BlockdevOptionsRaw
+# @BlockdevOptionsRaw:
 #
 # Driver specific block device options for the raw driver.
 #
@@ -2352,7 +2353,7 @@
   'data': { '*offset': 'int', '*size': 'int' } }
 
 ##
-# @BlockdevOptions
+# @BlockdevOptions:
 #
 # Options for creating a block device.  Many options are available for all
 # block devices, independent of the block driver:
@@ -2418,7 +2419,7 @@
   } }
 
 ##
-# @BlockdevRef
+# @BlockdevRef:
 #
 # Reference to a block device.
 #
@@ -2616,7 +2617,7 @@
 
 
 ##
-# @BlockErrorAction
+# @BlockErrorAction:
 #
 # An enumeration of action that has been taken when a DISK I/O occurs
 #
@@ -2633,7 +2634,7 @@
 
 
 ##
-# @BLOCK_IMAGE_CORRUPTED
+# @BLOCK_IMAGE_CORRUPTED:
 #
 # Emitted when a corruption has been detected in a disk image
 #
@@ -2668,7 +2669,7 @@
             'fatal'      : 'bool' } }
 
 ##
-# @BLOCK_IO_ERROR
+# @BLOCK_IO_ERROR:
 #
 # Emitted when a disk I/O error occurs
 #
@@ -2704,7 +2705,7 @@
             'reason': 'str' } }
 
 ##
-# @BLOCK_JOB_COMPLETED
+# @BLOCK_JOB_COMPLETED:
 #
 # Emitted when a block job has completed
 #
@@ -2736,7 +2737,7 @@
             '*error': 'str' } }
 
 ##
-# @BLOCK_JOB_CANCELLED
+# @BLOCK_JOB_CANCELLED:
 #
 # Emitted when a block job has been cancelled
 #
@@ -2762,7 +2763,7 @@
             'speed' : 'int' } }
 
 ##
-# @BLOCK_JOB_ERROR
+# @BLOCK_JOB_ERROR:
 #
 # Emitted when a block job encounters an error
 #
@@ -2781,7 +2782,7 @@
             'action'   : 'BlockErrorAction' } }
 
 ##
-# @BLOCK_JOB_READY
+# @BLOCK_JOB_READY:
 #
 # Emitted when a block job is ready to complete
 #
@@ -2809,7 +2810,8 @@
             'offset': 'int',
             'speed' : 'int' } }
 
-# @PreallocMode
+##
+# @PreallocMode:
 #
 # Preallocation mode of QEMU image file
 #
@@ -2821,13 +2823,13 @@
 #        space is really available. @full preallocation also sets up
 #        metadata correctly.
 #
-# Since 2.2
+# Since: 2.2
 ##
 { 'enum': 'PreallocMode',
   'data': [ 'off', 'metadata', 'falloc', 'full' ] }
 
 ##
-# @BLOCK_WRITE_THRESHOLD
+# @BLOCK_WRITE_THRESHOLD:
 #
 # Emitted when writes on block device reaches or exceeds the
 # configured write threshold. For thin-provisioned devices, this
@@ -2850,7 +2852,7 @@
             'write-threshold': 'uint64' } }
 
 ##
-# @block-set-write-threshold
+# @block-set-write-threshold:
 #
 # Change the write threshold for a block drive. An event will be delivered
 # if a write to this block drive crosses the configured threshold.
@@ -2868,7 +2870,7 @@
   'data': { 'node-name': 'str', 'write-threshold': 'uint64' } }
 
 ##
-# @x-blockdev-change
+# @x-blockdev-change:
 #
 # Dynamically reconfigure the block driver state graph. It can be used
 # to add, remove, insert or replace a graph node. Currently only the

qapi/block.json

@@ -40,7 +40,7 @@
   'data': ['auto', 'none', 'lba', 'large', 'rechs']}
 
 ##
-# @FloppyDriveType
+# @FloppyDriveType:
 #
 # Type of Floppy drive to be emulated by the Floppy Disk Controller.
 #
@@ -56,7 +56,7 @@
   'data': ['144', '288', '120', 'none', 'auto']}
 
 ##
-# @BlockdevSnapshotInternal
+# @BlockdevSnapshotInternal:
 #
 # @device: the device name or node-name of a root node to generate the snapshot
 #          from
@@ -73,7 +73,7 @@
   'data': { 'device': 'str', 'name': 'str' } }
 
 ##
-# @blockdev-snapshot-internal-sync
+# @blockdev-snapshot-internal-sync:
 #
 # Synchronously take an internal snapshot of a block device, when the format
 # of the image used supports it.
@@ -87,13 +87,13 @@
 #          If the format of the image used does not support it,
 #          BlockFormatFeatureNotSupported
 #
-# Since 1.7
+# Since: 1.7
 ##
 { 'command': 'blockdev-snapshot-internal-sync',
   'data': 'BlockdevSnapshotInternal' }
 
 ##
-# @blockdev-snapshot-delete-internal-sync
+# @blockdev-snapshot-delete-internal-sync:
 #
 # Synchronously delete an internal snapshot of a block device, when the format
 # of the image used support it. The snapshot is identified by name or id or
@@ -114,7 +114,7 @@
 #          BlockFormatFeatureNotSupported
 #          If @id and @name are both not specified, GenericError
 #
-# Since 1.7
+# Since: 1.7
 ##
 { 'command': 'blockdev-snapshot-delete-internal-sync',
   'data': { 'device': 'str', '*id': 'str', '*name': 'str'},
@@ -190,7 +190,7 @@
 { 'command': 'nbd-server-stop' }
 
 ##
-# @DEVICE_TRAY_MOVED
+# @DEVICE_TRAY_MOVED:
 #
 # Emitted whenever the tray of a removable device is moved by the guest or by
 # HMP/QMP commands
@@ -199,7 +199,7 @@
 #          reasons, but it can be empty ("") if the image does not
 #          have a device name associated.
 #
-# @id: The name or QOM path of the guest device
+# @id: The name or QOM path of the guest device (since 2.8)
 #
 # @tray-open: true if the tray has been opened or false if it has been closed
 #
@@ -209,7 +209,7 @@
   'data': { 'device': 'str', 'id': 'str', 'tray-open': 'bool' } }
 
 ##
-# @QuorumOpType
+# @QuorumOpType:
 #
 # An enumeration of the quorum operation types
 #

qapi/common.json

@@ -3,7 +3,7 @@
 # QAPI common definitions
 
 ##
-# @QapiErrorClass
+# @QapiErrorClass:
 #
 # QEMU error classes
 #
@@ -30,15 +30,15 @@
             'DeviceNotActive', 'DeviceNotFound', 'KVMMissingCap' ] }
 
 ##
-# @VersionTriple
+# @VersionTriple:
 #
 # A three-part version number.
 #
-# @qemu.major:  The major version number.
+# @major:  The major version number.
 #
-# @qemu.minor:  The minor version number.
+# @minor:  The minor version number.
 #
-# @qemu.micro:  The micro version number.
+# @micro:  The micro version number.
 #
 # Since: 2.4
 ##
@@ -101,7 +101,7 @@
 { 'command': 'query-commands', 'returns': ['CommandInfo'] }
 
 ##
-# @OnOffAuto
+# @OnOffAuto:
 #
 # An enumeration of three options: on, off, and auto
 #
@@ -117,7 +117,7 @@
   'data': [ 'auto', 'on', 'off' ] }
 
 ##
-# @OnOffSplit
+# @OnOffSplit:
 #
 # An enumeration of three values: on, off, and split
 #

qapi/crypto.json

@@ -3,7 +3,7 @@
 # QAPI crypto definitions
 
 ##
-# QCryptoTLSCredsEndpoint:
+# @QCryptoTLSCredsEndpoint:
 #
 # The type of network endpoint that will be using the credentials.
 # Most types of credential require different setup / structures
@@ -22,7 +22,7 @@
 
 
 ##
-# QCryptoSecretFormat:
+# @QCryptoSecretFormat:
 #
 # The data format that the secret is provided in
 #
@@ -36,7 +36,7 @@
 
 
 ##
-# QCryptoHashAlgorithm:
+# @QCryptoHashAlgorithm:
 #
 # The supported algorithms for computing content digests
 #
@@ -55,7 +55,7 @@
 
 
 ##
-# QCryptoCipherAlgorithm:
+# @QCryptoCipherAlgorithm:
 #
 # The supported algorithms for content encryption ciphers
 #
@@ -82,7 +82,7 @@
 
 
 ##
-# QCryptoCipherMode:
+# @QCryptoCipherMode:
 #
 # The supported modes for content encryption ciphers
 #
@@ -98,7 +98,7 @@
 
 
 ##
-# QCryptoIVGenAlgorithm:
+# @QCryptoIVGenAlgorithm:
 #
 # The supported algorithms for generating initialization
 # vectors for full disk encryption. The 'plain' generator
@@ -116,7 +116,7 @@
   'data': ['plain', 'plain64', 'essiv']}
 
 ##
-# QCryptoBlockFormat:
+# @QCryptoBlockFormat:
 #
 # The supported full disk encryption formats
 #
@@ -131,7 +131,7 @@
   'data': ['qcow', 'luks']}
 
 ##
-# QCryptoBlockOptionsBase:
+# @QCryptoBlockOptionsBase:
 #
 # The common options that apply to all full disk
 # encryption formats
@@ -144,7 +144,7 @@
   'data': { 'format': 'QCryptoBlockFormat' }}
 
 ##
-# QCryptoBlockOptionsQCow:
+# @QCryptoBlockOptionsQCow:
 #
 # The options that apply to QCow/QCow2 AES-CBC encryption format
 #
@@ -158,7 +158,7 @@
   'data': { '*key-secret': 'str' }}
 
 ##
-# QCryptoBlockOptionsLUKS:
+# @QCryptoBlockOptionsLUKS:
 #
 # The options that apply to LUKS encryption format
 #
@@ -172,7 +172,7 @@
 
 
 ##
-# QCryptoBlockCreateOptionsLUKS:
+# @QCryptoBlockCreateOptionsLUKS:
 #
 # The options that apply to LUKS encryption format initialization
 #
@@ -202,7 +202,7 @@
 
 
 ##
-# QCryptoBlockOpenOptions:
+# @QCryptoBlockOpenOptions:
 #
 # The options that are available for all encryption formats
 # when opening an existing volume
@@ -217,7 +217,7 @@
 
 
 ##
-# QCryptoBlockCreateOptions:
+# @QCryptoBlockCreateOptions:
 #
 # The options that are available for all encryption formats
 # when initializing a new volume
@@ -232,7 +232,7 @@
 
 
 ##
-# QCryptoBlockInfoBase:
+# @QCryptoBlockInfoBase:
 #
 # The common information that applies to all full disk
 # encryption formats
@@ -246,7 +246,7 @@
 
 
 ##
-# QCryptoBlockInfoLUKSSlot:
+# @QCryptoBlockInfoLUKSSlot:
 #
 # Information about the LUKS block encryption key
 # slot options
@@ -266,7 +266,7 @@
 
 
 ##
-# QCryptoBlockInfoLUKS:
+# @QCryptoBlockInfoLUKS:
 #
 # Information about the LUKS block encryption options
 #
@@ -294,7 +294,7 @@
            'slots': [ 'QCryptoBlockInfoLUKSSlot' ] }}
 
 ##
-# QCryptoBlockInfoQCow:
+# @QCryptoBlockInfoQCow:
 #
 # Information about the QCow block encryption options
 #
@@ -305,7 +305,7 @@
 
 
 ##
-# QCryptoBlockInfo:
+# @QCryptoBlockInfo:
 #
 # Information about the block encryption options
 #

qapi/event.json

@@ -1,5 +1,5 @@
 ##
-# @SHUTDOWN
+# @SHUTDOWN:
 #
 # Emitted when the virtual machine has shut down, indicating that qemu is
 # about to exit.
@@ -12,7 +12,7 @@
 { 'event': 'SHUTDOWN' }
 
 ##
-# @POWERDOWN
+# @POWERDOWN:
 #
 # Emitted when the virtual machine is powered down through the power control
 # system, such as via ACPI.
@@ -22,7 +22,7 @@
 { 'event': 'POWERDOWN' }
 
 ##
-# @RESET
+# @RESET:
 #
 # Emitted when the virtual machine is reset
 #
@@ -31,7 +31,7 @@
 { 'event': 'RESET' }
 
 ##
-# @STOP
+# @STOP:
 #
 # Emitted when the virtual machine is stopped
 #
@@ -40,7 +40,7 @@
 { 'event': 'STOP' }
 
 ##
-# @RESUME
+# @RESUME:
 #
 # Emitted when the virtual machine resumes execution
 #
@@ -49,7 +49,7 @@
 { 'event': 'RESUME' }
 
 ##
-# @SUSPEND
+# @SUSPEND:
 #
 # Emitted when guest enters a hardware suspension state, for example, S3 state,
 # which is sometimes called standby state
@@ -59,7 +59,7 @@
 { 'event': 'SUSPEND' }
 
 ##
-# @SUSPEND_DISK
+# @SUSPEND_DISK:
 #
 # Emitted when guest enters a hardware suspension state with data saved on
 # disk, for example, S4 state, which is sometimes called hibernate state
@@ -71,7 +71,7 @@
 { 'event': 'SUSPEND_DISK' }
 
 ##
-# @WAKEUP
+# @WAKEUP:
 #
 # Emitted when the guest has woken up from suspend state and is running
 #
@@ -80,7 +80,7 @@
 { 'event': 'WAKEUP' }
 
 ##
-# @RTC_CHANGE
+# @RTC_CHANGE:
 #
 # Emitted when the guest changes the RTC time.
 #
@@ -93,7 +93,7 @@
   'data': { 'offset': 'int' } }
 
 ##
-# @WATCHDOG
+# @WATCHDOG:
 #
 # Emitted when the watchdog device's timer is expired
 #
@@ -108,7 +108,7 @@
   'data': { 'action': 'WatchdogExpirationAction' } }
 
 ##
-# @DEVICE_DELETED
+# @DEVICE_DELETED:
 #
 # Emitted whenever the device removal completion is acknowledged by the guest.
 # At this point, it's safe to reuse the specified device ID. Device removal can
@@ -124,7 +124,7 @@
   'data': { '*device': 'str', 'path': 'str' } }
 
 ##
-# @NIC_RX_FILTER_CHANGED
+# @NIC_RX_FILTER_CHANGED:
 #
 # Emitted once until the 'query-rx-filter' command is executed, the first event
 # will always be emitted
@@ -139,7 +139,7 @@
   'data': { '*name': 'str', 'path': 'str' } }
 
 ##
-# @VNC_CONNECTED
+# @VNC_CONNECTED:
 #
 # Emitted when a VNC client establishes a connection
 #
@@ -157,7 +157,7 @@
             'client': 'VncBasicInfo' } }
 
 ##
-# @VNC_INITIALIZED
+# @VNC_INITIALIZED:
 #
 # Emitted after authentication takes place (if any) and the VNC session is
 # made active
@@ -173,7 +173,7 @@
             'client': 'VncClientInfo' } }
 
 ##
-# @VNC_DISCONNECTED
+# @VNC_DISCONNECTED:
 #
 # Emitted when the connection is closed
 #
@@ -188,7 +188,7 @@
             'client': 'VncClientInfo' } }
 
 ##
-# @SPICE_CONNECTED
+# @SPICE_CONNECTED:
 #
 # Emitted when a SPICE client establishes a connection
 #
@@ -203,7 +203,7 @@
             'client': 'SpiceBasicInfo' } }
 
 ##
-# @SPICE_INITIALIZED
+# @SPICE_INITIALIZED:
 #
 # Emitted after initial handshake and authentication takes place (if any)
 # and the SPICE channel is up and running
@@ -219,7 +219,7 @@
             'client': 'SpiceChannel' } }
 
 ##
-# @SPICE_DISCONNECTED
+# @SPICE_DISCONNECTED:
 #
 # Emitted when the SPICE connection is closed
 #
@@ -234,7 +234,7 @@
             'client': 'SpiceBasicInfo' } }
 
 ##
-# @SPICE_MIGRATE_COMPLETED
+# @SPICE_MIGRATE_COMPLETED:
 #
 # Emitted when SPICE migration has completed
 #
@@ -243,7 +243,7 @@
 { 'event': 'SPICE_MIGRATE_COMPLETED' }
 
 ##
-# @MIGRATION
+# @MIGRATION:
 #
 # Emitted when a migration event happens
 #
@@ -255,7 +255,7 @@
   'data': {'status': 'MigrationStatus'}}
 
 ##
-# @MIGRATION_PASS
+# @MIGRATION_PASS:
 #
 # Emitted from the source side of a migration at the start of each pass
 # (when it syncs the dirty bitmap)
@@ -268,7 +268,7 @@
   'data': { 'pass': 'int' } }
 
 ##
-# @ACPI_DEVICE_OST
+# @ACPI_DEVICE_OST:
 #
 # Emitted when guest executes ACPI _OST method.
 #
@@ -280,7 +280,7 @@
      'data': { 'info': 'ACPIOSTInfo' } }
 
 ##
-# @BALLOON_CHANGE
+# @BALLOON_CHANGE:
 #
 # Emitted when the guest changes the actual BALLOON level. This value is
 # equivalent to the @actual field return by the 'query-balloon' command
@@ -293,7 +293,7 @@
   'data': { 'actual': 'int' } }
 
 ##
-# @GUEST_PANICKED
+# @GUEST_PANICKED:
 #
 # Emitted when guest OS panic is detected
 #
@@ -305,7 +305,7 @@
   'data': { 'action': 'GuestPanicAction' } }
 
 ##
-# @QUORUM_FAILURE
+# @QUORUM_FAILURE:
 #
 # Emitted by the Quorum block driver if it fails to establish a quorum
 #
@@ -321,7 +321,7 @@
   'data': { 'reference': 'str', 'sector-num': 'int', 'sectors-count': 'int' } }
 
 ##
-# @QUORUM_REPORT_BAD
+# @QUORUM_REPORT_BAD:
 #
 # Emitted to report a corruption of a Quorum file
 #
@@ -345,7 +345,7 @@
             'sector-num': 'int', 'sectors-count': 'int' } }
 
 ##
-# @VSERPORT_CHANGE
+# @VSERPORT_CHANGE:
 #
 # Emitted when the guest opens or closes a virtio-serial port.
 #
@@ -359,7 +359,7 @@
   'data': { 'id': 'str', 'open': 'bool' } }
 
 ##
-# @MEM_UNPLUG_ERROR
+# @MEM_UNPLUG_ERROR:
 #
 # Emitted when memory hot unplug error occurs.
 #
@@ -373,7 +373,7 @@
   'data': { 'device': 'str', 'msg': 'str' } }
 
 ##
-# @DUMP_COMPLETED
+# @DUMP_COMPLETED:
 #
 # Emitted when background dump has completed
 #

qapi/introspect.json

@@ -11,7 +11,7 @@
 # See the COPYING file in the top-level directory.
 
 ##
-# @query-qmp-schema
+# @query-qmp-schema:
 #
 # Command query-qmp-schema exposes the QMP wire ABI as an array of
 # SchemaInfo.  This lets QMP clients figure out what commands and
@@ -49,7 +49,7 @@
   'gen': false }                # just to simplify qmp_query_json()
 
 ##
-# @SchemaMetaType
+# @SchemaMetaType:
 #
 # This is a @SchemaInfo's meta type, i.e. the kind of entity it
 # describes.
@@ -75,7 +75,7 @@
             'command', 'event' ] }
 
 ##
-# @SchemaInfo
+# @SchemaInfo:
 #
 # @name: the entity's name, inherited from @base.
 #        Commands and events have the name defined in the QAPI schema.
@@ -105,7 +105,7 @@
       'event': 'SchemaInfoEvent' } }
 
 ##
-# @SchemaInfoBuiltin
+# @SchemaInfoBuiltin:
 #
 # Additional SchemaInfo members for meta-type 'builtin'.
 #
@@ -117,7 +117,7 @@
   'data': { 'json-type': 'JSONType' } }
 
 ##
-# @JSONType
+# @JSONType:
 #
 # The four primitive and two structured types according to RFC 7159
 # section 1, plus 'int' (split off 'number'), plus the obvious top
@@ -130,7 +130,7 @@
             'object', 'array', 'value' ] }
 
 ##
-# @SchemaInfoEnum
+# @SchemaInfoEnum:
 #
 # Additional SchemaInfo members for meta-type 'enum'.
 #
@@ -144,7 +144,7 @@
   'data': { 'values': ['str'] } }
 
 ##
-# @SchemaInfoArray
+# @SchemaInfoArray:
 #
 # Additional SchemaInfo members for meta-type 'array'.
 #
@@ -158,7 +158,7 @@
   'data': { 'element-type': 'str' } }
 
 ##
-# @SchemaInfoObject
+# @SchemaInfoObject:
 #
 # Additional SchemaInfo members for meta-type 'object'.
 #
@@ -183,7 +183,7 @@
             '*variants': [ 'SchemaInfoObjectVariant' ] } }
 
 ##
-# @SchemaInfoObjectMember
+# @SchemaInfoObjectMember:
 #
 # An object member.
 #
@@ -206,7 +206,7 @@
 # @default's type must be null or match @type
 
 ##
-# @SchemaInfoObjectVariant
+# @SchemaInfoObjectVariant:
 #
 # The variant members for a value of the type tag.
 #
@@ -221,7 +221,7 @@
   'data': { 'case': 'str', 'type': 'str' } }
 
 ##
-# @SchemaInfoAlternate
+# @SchemaInfoAlternate:
 #
 # Additional SchemaInfo members for meta-type 'alternate'.
 #
@@ -237,7 +237,7 @@
   'data': { 'members': [ 'SchemaInfoAlternateMember' ] } }
 
 ##
-# @SchemaInfoAlternateMember
+# @SchemaInfoAlternateMember:
 #
 # An alternate member.
 #
@@ -249,7 +249,7 @@
   'data': { 'type': 'str' } }
 
 ##
-# @SchemaInfoCommand
+# @SchemaInfoCommand:
 #
 # Additional SchemaInfo members for meta-type 'command'.
 #
@@ -266,7 +266,7 @@
   'data': { 'arg-type': 'str', 'ret-type': 'str' } }
 
 ##
-# @SchemaInfoEvent
+# @SchemaInfoEvent:
 #
 # Additional SchemaInfo members for meta-type 'event'.
 #

qapi/qmp-event.c

@@ -35,21 +35,12 @@ static void timestamp_put(QDict *qdict)
     int err;
     QObject *obj;
     qemu_timeval tv;
-    int64_t sec, usec;
 
     err = qemu_gettimeofday(&tv);
-    if (err < 0) {
-        /* Put -1 to indicate failure of getting host time */
-        sec = -1;
-        usec = -1;
-    } else {
-        sec = tv.tv_sec;
-        usec = tv.tv_usec;
-    }
-
-    obj = qobject_from_jsonf("{ 'seconds': %" PRId64 ", "
-                             "'microseconds': %" PRId64 " }",
-                             sec, usec);
+    /* Put -1 to indicate failure of getting host time */
+    obj = qobject_from_jsonf("{ 'seconds': %lld, 'microseconds': %lld }",
+                             err < 0 ? -1LL : (long long)tv.tv_sec,
+                             err < 0 ? -1LL : (long long)tv.tv_usec);
     qdict_put_obj(qdict, "timestamp", obj);
 }
 

qapi/rocker.json

@@ -1,5 +1,5 @@
 ##
-# @Rocker:
+# @RockerSwitch:
 #
 # Rocker switch information.
 #

qapi/trace.json

@@ -17,7 +17,7 @@
 #
 # @enabled: The event is dynamically enabled.
 #
-# Since 2.2
+# Since: 2.2
 ##
 { 'enum': 'TraceEventState',
   'data': ['unavailable', 'disabled', 'enabled'] }
@@ -34,7 +34,7 @@
 # An event is per-vCPU if it has the "vcpu" property in the "trace-events"
 # files.
 #
-# Since 2.2
+# Since: 2.2
 ##
 { 'struct': 'TraceEventInfo',
   'data': {'name': 'str', 'state': 'TraceEventState', 'vcpu': 'bool'} }
@@ -58,7 +58,7 @@
 # exact match, @vcpu is given and the event does not have the "vcpu" property,
 # an error is returned.
 #
-# Since 2.2
+# Since: 2.2
 ##
 { 'command': 'trace-event-get-state',
   'data': {'name': 'str', '*vcpu': 'int'},
@@ -83,7 +83,7 @@
 # match, @vcpu is given and the event does not have the "vcpu" property, an
 # error is returned.
 #
-# Since 2.2
+# Since: 2.2
 ##
 { 'command': 'trace-event-set-state',
   'data': {'name': 'str', 'enable': 'bool', '*ignore-unavailable': 'bool',

qemu-doc.texi

@@ -1041,35 +1041,55 @@ GlusterFS is an user space distributed file system.
 
 You can boot from the GlusterFS disk image with the command:
 @example
-qemu-system-x86_64 -drive file=gluster[+@var{transport}]://[@var{server}[:@var{port}]]/@var{volname}/@var{image}[?socket=...]
+URI:
+qemu-system-x86_64 -drive file=gluster[+@var{type}]://[@var{host}[:@var{port}]]/@var{volume}/@var{path}
+                               [?socket=...][,file.debug=9][,file.logfile=...]
+
+JSON:
+qemu-system-x86_64 'json:@{"driver":"qcow2",
+                           "file":@{"driver":"gluster",
+                                    "volume":"testvol","path":"a.img","debug":9,"logfile":"...",
+                                    "server":[@{"type":"tcp","host":"...","port":"..."@},
+                                              @{"type":"unix","socket":"..."@}]@}@}'
 @end example
 
 @var{gluster} is the protocol.
 
-@var{transport} specifies the transport type used to connect to gluster
+@var{type} specifies the transport type used to connect to gluster
 management daemon (glusterd). Valid transport types are
-tcp, unix and rdma. If a transport type isn't specified, then tcp
-type is assumed.
+tcp and unix. In the URI form, if a transport type isn't specified,
+then tcp type is assumed.
 
-@var{server} specifies the server where the volume file specification for
-the given volume resides. This can be either hostname, ipv4 address
-or ipv6 address. ipv6 address needs to be within square brackets [ ].
-If transport type is unix, then @var{server} field should not be specified.
+@var{host} specifies the server where the volume file specification for
+the given volume resides. This can be either a hostname or an ipv4 address.
+If transport type is unix, then @var{host} field should not be specified.
 Instead @var{socket} field needs to be populated with the path to unix domain
 socket.
 
 @var{port} is the port number on which glusterd is listening. This is optional
-and if not specified, QEMU will send 0 which will make gluster to use the
-default port. If the transport type is unix, then @var{port} should not be
-specified.
+and if not specified, it defaults to port 24007. If the transport type is unix,
+then @var{port} should not be specified.
+
+@var{volume} is the name of the gluster volume which contains the disk image.
+
+@var{path} is the path to the actual disk image that resides on gluster volume.
+
+@var{debug} is the logging level of the gluster protocol driver. Debug levels
+are 0-9, with 9 being the most verbose, and 0 representing no debugging output.
+The default level is 4. The current logging levels defined in the gluster source
+are 0 - None, 1 - Emergency, 2 - Alert, 3 - Critical, 4 - Error, 5 - Warning,
+6 - Notice, 7 - Info, 8 - Debug, 9 - Trace
+
+@var{logfile} is a commandline option to mention log file path which helps in
+logging to the specified file and also help in persisting the gfapi logs. The
+default is stderr.
+
 
-@var{volname} is the name of the gluster volume which contains the disk image.
 
-@var{image} is the path to the actual disk image that resides on gluster volume.
 
 You can create a GlusterFS disk image with the command:
 @example
-qemu-img create gluster://@var{server}/@var{volname}/@var{image} @var{size}
+qemu-img create gluster://@var{host}/@var{volume}/@var{path} @var{size}
 @end example
 
 Examples
@@ -1082,6 +1102,17 @@ qemu-system-x86_64 -drive file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir
 qemu-system-x86_64 -drive file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img
 qemu-system-x86_64 -drive file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket
 qemu-system-x86_64 -drive file=gluster+rdma://1.2.3.4:24007/testvol/a.img
+qemu-system-x86_64 -drive file=gluster://1.2.3.4/testvol/a.img,file.debug=9,file.logfile=/var/log/qemu-gluster.log
+qemu-system-x86_64 'json:@{"driver":"qcow2",
+                           "file":@{"driver":"gluster",
+                                    "volume":"testvol","path":"a.img",
+                                    "debug":9,"logfile":"/var/log/qemu-gluster.log",
+                                    "server":[@{"type":"tcp","host":"1.2.3.4","port":24007@},
+                                              @{"type":"unix","socket":"/var/run/glusterd.socket"@}]@}@}'
+qemu-system-x86_64 -drive driver=qcow2,file.driver=gluster,file.volume=testvol,file.path=/path/a.img,
+                                       file.debug=9,file.logfile=/var/log/qemu-gluster.log,
+                                       file.server.0.type=tcp,file.server.0.host=1.2.3.4,file.server.0.port=24007,
+                                       file.server.1.type=unix,file.server.1.socket=/var/run/glusterd.socket
 @end example
 
 @node disk_images_ssh

qemu-options.hx

@@ -2595,13 +2595,34 @@ TCP, Unix Domain Sockets and RDMA transport protocols.
 
 Syntax for specifying a VM disk image on GlusterFS volume is
 @example
-gluster[+transport]://[server[:port]]/volname/image[?socket=...]
+
+URI:
+gluster[+type]://[host[:port]]/volume/path[?socket=...][,debug=N][,logfile=...]
+
+JSON:
+'json:@{"driver":"qcow2","file":@{"driver":"gluster","volume":"testvol","path":"a.img","debug":N,"logfile":"...",
+@                                 "server":[@{"type":"tcp","host":"...","port":"..."@},
+@                                           @{"type":"unix","socket":"..."@}]@}@}'
 @end example
 
 
 Example
 @example
-qemu-system-x86_64 --drive file=gluster://192.0.2.1/testvol/a.img
+URI:
+qemu-system-x86_64 --drive file=gluster://192.0.2.1/testvol/a.img,
+@                               file.debug=9,file.logfile=/var/log/qemu-gluster.log
+
+JSON:
+qemu-system-x86_64 'json:@{"driver":"qcow2",
+@                          "file":@{"driver":"gluster",
+@                                   "volume":"testvol","path":"a.img",
+@                                   "debug":9,"logfile":"/var/log/qemu-gluster.log",
+@                                   "server":[@{"type":"tcp","host":"1.2.3.4","port":24007@},
+@                                             @{"type":"unix","socket":"/var/run/glusterd.socket"@}]@}@}'
+qemu-system-x86_64 -drive driver=qcow2,file.driver=gluster,file.volume=testvol,file.path=/path/a.img,
+@                                      file.debug=9,file.logfile=/var/log/qemu-gluster.log,
+@                                      file.server.0.type=tcp,file.server.0.host=1.2.3.4,file.server.0.port=24007,
+@                                      file.server.1.type=unix,file.server.1.socket=/var/run/glusterd.socket
 @end example
 
 See also @url{http://www.gluster.org}.

qga/qapi-schema.json

@@ -102,7 +102,7 @@
 #
 # Returns: Time in nanoseconds.
 #
-# Since 1.5
+# Since: 1.5
 ##
 { 'command': 'guest-get-time',
   'returns': 'int' }
@@ -149,13 +149,13 @@
 # @success-response: whether command returns a response on success
 #                    (since 1.7)
 #
-# Since 1.1.0
+# Since: 1.1.0
 ##
 { 'struct': 'GuestAgentCommandInfo',
   'data': { 'name': 'str', 'enabled': 'bool', 'success-response': 'bool' } }
 
 ##
-# @GuestAgentInfo
+# @GuestAgentInfo:
 #
 # Information about guest agent.
 #
@@ -163,7 +163,7 @@
 #
 # @supported_commands: Information about guest agent commands
 #
-# Since 0.15.0
+# Since: 0.15.0
 ##
 { 'struct': 'GuestAgentInfo',
   'data': { 'version': 'str',
@@ -203,7 +203,7 @@
 #
 # Open a file in the guest and retrieve a file handle for it
 #
-# @filepath: Full path to the file in the guest to open.
+# @path: Full path to the file in the guest to open.
 #
 # @mode: #optional open mode, as per fopen(), "r" is the default.
 #
@@ -230,7 +230,7 @@
   'data': { 'handle': 'int' } }
 
 ##
-# @GuestFileRead
+# @GuestFileRead:
 #
 # Result of guest agent file-read operation
 #
@@ -264,7 +264,7 @@
   'returns': 'GuestFileRead' }
 
 ##
-# @GuestFileWrite
+# @GuestFileWrite:
 #
 # Result of guest agent file-write operation
 #
@@ -300,7 +300,7 @@
 
 
 ##
-# @GuestFileSeek
+# @GuestFileSeek:
 #
 # Result of guest agent file-seek operation
 #
@@ -378,7 +378,7 @@
   'data': { 'handle': 'int' } }
 
 ##
-# @GuestFsFreezeStatus
+# @GuestFsfreezeStatus:
 #
 # An enumeration of filesystem freeze states
 #
@@ -455,7 +455,7 @@
   'returns': 'int' }
 
 ##
-# @GuestFilesystemTrimResult
+# @GuestFilesystemTrimResult:
 #
 # @path: path that was trimmed
 # @error: an error message when trim failed
@@ -469,7 +469,7 @@
            '*trimmed': 'int', '*minimum': 'int', '*error': 'str'} }
 
 ##
-# @GuestFilesystemTrimResponse
+# @GuestFilesystemTrimResponse:
 #
 # @paths: list of @GuestFilesystemTrimResult per path that was trimmed
 #
@@ -501,7 +501,7 @@
   'returns': 'GuestFilesystemTrimResponse' }
 
 ##
-# @guest-suspend-disk
+# @guest-suspend-disk:
 #
 # Suspend guest to disk.
 #
@@ -529,7 +529,7 @@
 { 'command': 'guest-suspend-disk', 'success-response': false }
 
 ##
-# @guest-suspend-ram
+# @guest-suspend-ram:
 #
 # Suspend guest to ram.
 #
@@ -561,7 +561,7 @@
 { 'command': 'guest-suspend-ram', 'success-response': false }
 
 ##
-# @guest-suspend-hybrid
+# @guest-suspend-hybrid:
 #
 # Save guest state to disk and suspend to ram.
 #
@@ -720,7 +720,7 @@
   'returns': 'int' }
 
 ##
-# @GuestDiskBusType
+# @GuestDiskBusType:
 #
 # An enumeration of bus type of disks
 #
@@ -770,7 +770,7 @@
 # @GuestDiskAddress:
 #
 # @pci-controller: controller's PCI address
-# @type: bus type
+# @bus-type: bus type
 # @bus: bus id
 # @target: target id
 # @unit: unit id
@@ -783,7 +783,7 @@
            'bus': 'int', 'target': 'int', 'unit': 'int'} }
 
 ##
-# @GuestFilesystemInfo
+# @GuestFilesystemInfo:
 #
 # @name: disk name
 # @mountpoint: mount point path
@@ -811,7 +811,7 @@
   'returns': ['GuestFilesystemInfo'] }
 
 ##
-# @guest-set-user-password
+# @guest-set-user-password:
 #
 # @username: the user account whose password to change
 # @password: the new password entry string, base64 encoded
@@ -832,11 +832,12 @@
 #
 # Returns: Nothing on success.
 #
-# Since 2.3
+# Since: 2.3
 ##
 { 'command': 'guest-set-user-password',
   'data': { 'username': 'str', 'password': 'str', 'crypted': 'bool' } }
 
+##
 # @GuestMemoryBlock:
 #
 # @phys-index: Arbitrary guest-specific unique identifier of the MEMORY BLOCK.
@@ -872,7 +873,7 @@
   'returns': ['GuestMemoryBlock'] }
 
 ##
-# @GuestMemoryBlockResponseType
+# @GuestMemoryBlockResponseType:
 #
 # An enumeration of memory block operation result.
 #
@@ -936,6 +937,7 @@
   'data':    {'mem-blks': ['GuestMemoryBlock'] },
   'returns': ['GuestMemoryBlockResponse'] }
 
+##
 # @GuestMemoryBlockInfo:
 #
 # @size: the size (in bytes) of the guest memory blocks,
@@ -952,14 +954,14 @@
 #
 # Get information relating to guest memory blocks.
 #
-# Returns: memory block size in bytes.
 # Returns: @GuestMemoryBlockInfo
 #
-# Since 2.3
+# Since: 2.3
 ##
 { 'command': 'guest-get-memory-block-info',
   'returns': 'GuestMemoryBlockInfo' }
 
+##
 # @GuestExecStatus:
 #
 # @exited: true if process has already terminated.
@@ -982,7 +984,7 @@
             '*out-data': 'str', '*err-data': 'str',
             '*out-truncated': 'bool', '*err-truncated': 'bool' }}
 ##
-# @guest-exec-status
+# @guest-exec-status:
 #
 # Check status of process associated with PID retrieved via guest-exec.
 # Reap the process and associated metadata if it has exited.
@@ -991,7 +993,7 @@
 #
 # Returns: GuestExecStatus on success.
 #
-# Since 2.5
+# Since: 2.5
 ##
 { 'command': 'guest-exec-status',
   'data':    { 'pid': 'int' },
@@ -1001,7 +1003,7 @@
 # @GuestExec:
 # @pid: pid of child process in guest OS
 #
-#Since: 2.5
+# Since: 2.5
 ##
 { 'struct': 'GuestExec',
   'data': { 'pid': 'int'} }

target-arm/translate-a64.c

@@ -1839,41 +1839,37 @@ static void disas_b_exc_sys(DisasContext *s, uint32_t insn)
     }
 }
 
+/*
+ * Load/Store exclusive instructions are implemented by remembering
+ * the value/address loaded, and seeing if these are the same
+ * when the store is performed. This is not actually the architecturally
+ * mandated semantics, but it works for typical guest code sequences
+ * and avoids having to monitor regular stores.
+ *
+ * The store exclusive uses the atomic cmpxchg primitives to avoid
+ * races in multi-threaded linux-user and when MTTCG softmmu is
+ * enabled.
+ */
 static void gen_load_exclusive(DisasContext *s, int rt, int rt2,
                                TCGv_i64 addr, int size, bool is_pair)
 {
     TCGv_i64 tmp = tcg_temp_new_i64();
-    TCGMemOp be = s->be_data;
+    TCGMemOp memop = s->be_data + size;
 
     g_assert(size <= 3);
+    tcg_gen_qemu_ld_i64(tmp, addr, get_mem_index(s), memop);
+
     if (is_pair) {
+        TCGv_i64 addr2 = tcg_temp_new_i64();
         TCGv_i64 hitmp = tcg_temp_new_i64();
 
-        if (size == 3) {
-            TCGv_i64 addr2 = tcg_temp_new_i64();
-
-            tcg_gen_qemu_ld_i64(tmp, addr, get_mem_index(s),
-                                MO_64 | MO_ALIGN_16 | be);
-            tcg_gen_addi_i64(addr2, addr, 8);
-            tcg_gen_qemu_ld_i64(hitmp, addr2, get_mem_index(s),
-                                MO_64 | MO_ALIGN | be);
-            tcg_temp_free_i64(addr2);
-        } else {
-            g_assert(size == 2);
-            tcg_gen_qemu_ld_i64(tmp, addr, get_mem_index(s),
-                                MO_64 | MO_ALIGN | be);
-            if (be == MO_LE) {
-                tcg_gen_extr32_i64(tmp, hitmp, tmp);
-            } else {
-                tcg_gen_extr32_i64(hitmp, tmp, tmp);
-            }
-        }
-
+        g_assert(size >= 2);
+        tcg_gen_addi_i64(addr2, addr, 1 << size);
+        tcg_gen_qemu_ld_i64(hitmp, addr2, get_mem_index(s), memop);
+        tcg_temp_free_i64(addr2);
         tcg_gen_mov_i64(cpu_exclusive_high, hitmp);
         tcg_gen_mov_i64(cpu_reg(s, rt2), hitmp);
         tcg_temp_free_i64(hitmp);
-    } else {
-        tcg_gen_qemu_ld_i64(tmp, addr, get_mem_index(s), size | MO_ALIGN | be);
     }
 
     tcg_gen_mov_i64(cpu_exclusive_val, tmp);

target-mips/dsp_helper.c

@@ -3477,7 +3477,7 @@ target_ulong helper_dextp(target_ulong ac, target_ulong size, CPUMIPSState *env)
 
     if (sub >= -1) {
         temp = (tempB << (64 - len)) | (tempA >> len);
-        temp = temp & ((0x01 << (size + 1)) - 1);
+        temp = temp & ((1ULL << (size + 1)) - 1);
         set_DSPControl_efi(0, env);
     } else {
         set_DSPControl_efi(1, env);
@@ -3506,7 +3506,7 @@ target_ulong helper_dextpdp(target_ulong ac, target_ulong size,
 
     if (sub >= -1) {
         temp = (tempB << (64 - len)) | (tempA >> len);
-        temp = temp & ((0x01 << (size + 1)) - 1);
+        temp = temp & ((1ULL << (size + 1)) - 1);
         set_DSPControl_pos(sub, env);
         set_DSPControl_efi(0, env);
     } else {

target-mips/translate.c

@@ -3871,6 +3871,7 @@ static void gen_loongson_multimedia(DisasContext *ctx, int rd, int rs, int rt)
         break;
     }
 
+    check_cp1_enabled(ctx);
     gen_load_fpr64(ctx, t0, rs);
     gen_load_fpr64(ctx, t1, rt);
 
@@ -3945,8 +3946,11 @@ static void gen_loongson_multimedia(DisasContext *ctx, int rd, int rs, int rt)
     LMI_DIRECT(XOR_CP2, xor, xor);
     LMI_DIRECT(NOR_CP2, nor, nor);
     LMI_DIRECT(AND_CP2, and, and);
-    LMI_DIRECT(PANDN, pandn, andc);
-    LMI_DIRECT(OR, or, or);
+    LMI_DIRECT(OR_CP2, or, or);
+
+    case OPC_PANDN:
+        tcg_gen_andc_i64(t0, t1, t0);
+        break;
 
     case OPC_PINSRH_0:
         tcg_gen_deposit_i64(t0, t0, t1, 0, 16);

tests/.gitignore

@@ -16,6 +16,7 @@ test-bitops
 test-blockjob
 test-blockjob-txn
 test-bufferiszero
+test-char
 test-clone-visitor
 test-coroutine
 test-crypto-afsplit

tests/check-qjson.c

@@ -964,7 +964,7 @@ static void vararg_number(void)
     QInt *qint;
     QFloat *qfloat;
     int value = 0x2342;
-    int64_t value64 = 0x2342342343LL;
+    long long value_ll = 0x2342342343LL;
     double valuef = 2.323423423;
 
     obj = qobject_from_jsonf("%d", value);
@@ -976,12 +976,12 @@ static void vararg_number(void)
 
     QDECREF(qint);
 
-    obj = qobject_from_jsonf("%" PRId64, value64);
+    obj = qobject_from_jsonf("%lld", value_ll);
     g_assert(obj != NULL);
     g_assert(qobject_type(obj) == QTYPE_QINT);
 
     qint = qobject_to_qint(obj);
-    g_assert(qint_get_int(qint) == value64);
+    g_assert(qint_get_int(qint) == value_ll);
 
     QDECREF(qint);
 

tests/qemu-iotests/097

@@ -46,7 +46,7 @@ _supported_proto file
 _supported_os Linux
 
 
-# Four passes:
+# Four main passes:
 #  0: Two-layer backing chain, commit to upper backing file (implicitly)
 #     (in this case, the top image will be emptied)
 #  1: Two-layer backing chain, commit to upper backing file (explicitly)
@@ -56,22 +56,30 @@ _supported_os Linux
 #  3: Two-layer backing chain, commit to lower backing file
 #     (in this case, the top image will implicitly stay unchanged)
 #
+# Each pass is run twice, since qcow2 has different code paths for cleaning
+# an image depending on whether it has a snapshot.
+#
 # 020 already tests committing, so this only tests whether image chains are
 # working properly and that all images above the base are emptied; therefore,
-# no complicated patterns are necessary
+# no complicated patterns are necessary.  Check near the 2G mark, as qcow2
+# has been buggy at that boundary in the past.
 for i in 0 1 2 3; do
+for j in 0 1; do
 
 echo
-echo "=== Test pass $i ==="
+echo "=== Test pass $i.$j ==="
 echo
 
-TEST_IMG="$TEST_IMG.base" _make_test_img 64M
-TEST_IMG="$TEST_IMG.itmd" _make_test_img -b "$TEST_IMG.base" 64M
-_make_test_img -b "$TEST_IMG.itmd" 64M
+TEST_IMG="$TEST_IMG.base" _make_test_img 2100M
+TEST_IMG="$TEST_IMG.itmd" _make_test_img -b "$TEST_IMG.base" 2100M
+_make_test_img -b "$TEST_IMG.itmd" 2100M
+if [ $j -eq 0 ]; then
+    $QEMU_IMG snapshot -c snap "$TEST_IMG"
+fi
 
-$QEMU_IO -c 'write -P 1 0 192k' "$TEST_IMG.base" | _filter_qemu_io
-$QEMU_IO -c 'write -P 2 64k 128k' "$TEST_IMG.itmd" | _filter_qemu_io
-$QEMU_IO -c 'write -P 3 128k 64k' "$TEST_IMG" | _filter_qemu_io
+$QEMU_IO -c 'write -P 1 0x7ffd0000 192k' "$TEST_IMG.base" | _filter_qemu_io
+$QEMU_IO -c 'write -P 2 0x7ffe0000 128k' "$TEST_IMG.itmd" | _filter_qemu_io
+$QEMU_IO -c 'write -P 3 0x7fff0000 64k' "$TEST_IMG" | _filter_qemu_io
 
 if [ $i -lt 3 ]; then
     if [ $i == 0 ]; then
@@ -88,12 +96,12 @@ if [ $i -lt 3 ]; then
     fi
 
     # Bottom should be unchanged
-    $QEMU_IO -c 'read -P 1 0 192k' "$TEST_IMG.base" | _filter_qemu_io
+    $QEMU_IO -c 'read -P 1 0x7ffd0000 192k' "$TEST_IMG.base" | _filter_qemu_io
 
     # Intermediate should contain changes from top
-    $QEMU_IO -c 'read -P 1 0 64k' "$TEST_IMG.itmd" | _filter_qemu_io
-    $QEMU_IO -c 'read -P 2 64k 64k' "$TEST_IMG.itmd" | _filter_qemu_io
-    $QEMU_IO -c 'read -P 3 128k 64k' "$TEST_IMG.itmd" | _filter_qemu_io
+    $QEMU_IO -c 'read -P 1 0x7ffd0000 64k' "$TEST_IMG.itmd" | _filter_qemu_io
+    $QEMU_IO -c 'read -P 2 0x7ffe0000 64k' "$TEST_IMG.itmd" | _filter_qemu_io
+    $QEMU_IO -c 'read -P 3 0x7fff0000 64k' "$TEST_IMG.itmd" | _filter_qemu_io
 
     # And in pass 0, the top image should be empty, whereas in both other passes
     # it should be unchanged (which is both checked by qemu-img map)
@@ -101,9 +109,9 @@ else
     $QEMU_IMG commit -b "$TEST_IMG.base" "$TEST_IMG"
 
     # Bottom should contain all changes
-    $QEMU_IO -c 'read -P 1 0 64k' "$TEST_IMG.base" | _filter_qemu_io
-    $QEMU_IO -c 'read -P 2 64k 64k' "$TEST_IMG.base" | _filter_qemu_io
-    $QEMU_IO -c 'read -P 3 128k 64k' "$TEST_IMG.base" | _filter_qemu_io
+    $QEMU_IO -c 'read -P 1 0x7ffd0000 64k' "$TEST_IMG.base" | _filter_qemu_io
+    $QEMU_IO -c 'read -P 2 0x7ffe0000 64k' "$TEST_IMG.base" | _filter_qemu_io
+    $QEMU_IO -c 'read -P 3 0x7fff0000 64k' "$TEST_IMG.base" | _filter_qemu_io
 
     # Both top and intermediate should be unchanged
 fi
@@ -113,6 +121,7 @@ $QEMU_IMG map "$TEST_IMG.itmd" | _filter_qemu_img_map
 $QEMU_IMG map "$TEST_IMG" | _filter_qemu_img_map
 
 done
+done
 
 
 # success, all done

tests/qemu-iotests/097.out

@@ -1,119 +1,236 @@
 QA output created by 097
 
-=== Test pass 0 ===
+=== Test pass 0.0 ===
 
-Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864
-Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.itmd
-wrote 196608/196608 bytes at offset 0
+Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=2202009600
+Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202009600 backing_file=TEST_DIR/t.IMGFMT.base
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202009600 backing_file=TEST_DIR/t.IMGFMT.itmd
+wrote 196608/196608 bytes at offset 2147287040
 192 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-wrote 131072/131072 bytes at offset 65536
+wrote 131072/131072 bytes at offset 2147352576
 128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-wrote 65536/65536 bytes at offset 131072
+wrote 65536/65536 bytes at offset 2147418112
 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 Image committed.
-read 196608/196608 bytes at offset 0
+read 196608/196608 bytes at offset 2147287040
 192 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-read 65536/65536 bytes at offset 0
+read 65536/65536 bytes at offset 2147287040
 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-read 65536/65536 bytes at offset 65536
+read 65536/65536 bytes at offset 2147352576
 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-read 65536/65536 bytes at offset 131072
+read 65536/65536 bytes at offset 2147418112
 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 Offset          Length          File
-0               0x30000         TEST_DIR/t.IMGFMT.base
+0x7ffd0000      0x30000         TEST_DIR/t.IMGFMT.base
 Offset          Length          File
-0               0x10000         TEST_DIR/t.IMGFMT.base
-0x10000         0x20000         TEST_DIR/t.IMGFMT.itmd
+0x7ffd0000      0x10000         TEST_DIR/t.IMGFMT.base
+0x7ffe0000      0x20000         TEST_DIR/t.IMGFMT.itmd
 Offset          Length          File
-0               0x10000         TEST_DIR/t.IMGFMT.base
-0x10000         0x20000         TEST_DIR/t.IMGFMT.itmd
+0x7ffd0000      0x10000         TEST_DIR/t.IMGFMT.base
+0x7ffe0000      0x20000         TEST_DIR/t.IMGFMT.itmd
 
-=== Test pass 1 ===
+=== Test pass 0.1 ===
 
-Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864
-Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.itmd
-wrote 196608/196608 bytes at offset 0
+Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=2202009600
+Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202009600 backing_file=TEST_DIR/t.IMGFMT.base
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202009600 backing_file=TEST_DIR/t.IMGFMT.itmd
+wrote 196608/196608 bytes at offset 2147287040
 192 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-wrote 131072/131072 bytes at offset 65536
+wrote 131072/131072 bytes at offset 2147352576
 128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-wrote 65536/65536 bytes at offset 131072
+wrote 65536/65536 bytes at offset 2147418112
 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 Image committed.
-read 196608/196608 bytes at offset 0
+read 196608/196608 bytes at offset 2147287040
 192 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-read 65536/65536 bytes at offset 0
+read 65536/65536 bytes at offset 2147287040
 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-read 65536/65536 bytes at offset 65536
+read 65536/65536 bytes at offset 2147352576
 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-read 65536/65536 bytes at offset 131072
+read 65536/65536 bytes at offset 2147418112
 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 Offset          Length          File
-0               0x30000         TEST_DIR/t.IMGFMT.base
+0x7ffd0000      0x30000         TEST_DIR/t.IMGFMT.base
 Offset          Length          File
-0               0x10000         TEST_DIR/t.IMGFMT.base
-0x10000         0x20000         TEST_DIR/t.IMGFMT.itmd
+0x7ffd0000      0x10000         TEST_DIR/t.IMGFMT.base
+0x7ffe0000      0x20000         TEST_DIR/t.IMGFMT.itmd
 Offset          Length          File
-0               0x10000         TEST_DIR/t.IMGFMT.base
-0x10000         0x10000         TEST_DIR/t.IMGFMT.itmd
-0x20000         0x10000         TEST_DIR/t.IMGFMT
+0x7ffd0000      0x10000         TEST_DIR/t.IMGFMT.base
+0x7ffe0000      0x20000         TEST_DIR/t.IMGFMT.itmd
 
-=== Test pass 2 ===
+=== Test pass 1.0 ===
 
-Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864
-Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.itmd
-wrote 196608/196608 bytes at offset 0
+Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=2202009600
+Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202009600 backing_file=TEST_DIR/t.IMGFMT.base
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202009600 backing_file=TEST_DIR/t.IMGFMT.itmd
+wrote 196608/196608 bytes at offset 2147287040
 192 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-wrote 131072/131072 bytes at offset 65536
+wrote 131072/131072 bytes at offset 2147352576
 128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-wrote 65536/65536 bytes at offset 131072
+wrote 65536/65536 bytes at offset 2147418112
 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 Image committed.
-read 196608/196608 bytes at offset 0
+read 196608/196608 bytes at offset 2147287040
 192 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-read 65536/65536 bytes at offset 0
+read 65536/65536 bytes at offset 2147287040
 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-read 65536/65536 bytes at offset 65536
+read 65536/65536 bytes at offset 2147352576
 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-read 65536/65536 bytes at offset 131072
+read 65536/65536 bytes at offset 2147418112
 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 Offset          Length          File
-0               0x30000         TEST_DIR/t.IMGFMT.base
+0x7ffd0000      0x30000         TEST_DIR/t.IMGFMT.base
 Offset          Length          File
-0               0x10000         TEST_DIR/t.IMGFMT.base
-0x10000         0x20000         TEST_DIR/t.IMGFMT.itmd
+0x7ffd0000      0x10000         TEST_DIR/t.IMGFMT.base
+0x7ffe0000      0x20000         TEST_DIR/t.IMGFMT.itmd
 Offset          Length          File
-0               0x10000         TEST_DIR/t.IMGFMT.base
-0x10000         0x10000         TEST_DIR/t.IMGFMT.itmd
-0x20000         0x10000         TEST_DIR/t.IMGFMT
+0x7ffd0000      0x10000         TEST_DIR/t.IMGFMT.base
+0x7ffe0000      0x10000         TEST_DIR/t.IMGFMT.itmd
+0x7fff0000      0x10000         TEST_DIR/t.IMGFMT
 
-=== Test pass 3 ===
+=== Test pass 1.1 ===
 
-Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864
-Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.itmd
-wrote 196608/196608 bytes at offset 0
+Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=2202009600
+Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202009600 backing_file=TEST_DIR/t.IMGFMT.base
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202009600 backing_file=TEST_DIR/t.IMGFMT.itmd
+wrote 196608/196608 bytes at offset 2147287040
 192 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-wrote 131072/131072 bytes at offset 65536
+wrote 131072/131072 bytes at offset 2147352576
 128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-wrote 65536/65536 bytes at offset 131072
+wrote 65536/65536 bytes at offset 2147418112
 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 Image committed.
-read 65536/65536 bytes at offset 0
+read 196608/196608 bytes at offset 2147287040
+192 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 65536/65536 bytes at offset 2147287040
 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-read 65536/65536 bytes at offset 65536
+read 65536/65536 bytes at offset 2147352576
 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-read 65536/65536 bytes at offset 131072
+read 65536/65536 bytes at offset 2147418112
 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 Offset          Length          File
-0               0x30000         TEST_DIR/t.IMGFMT.base
+0x7ffd0000      0x30000         TEST_DIR/t.IMGFMT.base
 Offset          Length          File
-0               0x10000         TEST_DIR/t.IMGFMT.base
-0x10000         0x20000         TEST_DIR/t.IMGFMT.itmd
+0x7ffd0000      0x10000         TEST_DIR/t.IMGFMT.base
+0x7ffe0000      0x20000         TEST_DIR/t.IMGFMT.itmd
 Offset          Length          File
-0               0x10000         TEST_DIR/t.IMGFMT.base
-0x10000         0x10000         TEST_DIR/t.IMGFMT.itmd
-0x20000         0x10000         TEST_DIR/t.IMGFMT
+0x7ffd0000      0x10000         TEST_DIR/t.IMGFMT.base
+0x7ffe0000      0x10000         TEST_DIR/t.IMGFMT.itmd
+0x7fff0000      0x10000         TEST_DIR/t.IMGFMT
+
+=== Test pass 2.0 ===
+
+Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=2202009600
+Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202009600 backing_file=TEST_DIR/t.IMGFMT.base
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202009600 backing_file=TEST_DIR/t.IMGFMT.itmd
+wrote 196608/196608 bytes at offset 2147287040
+192 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 131072/131072 bytes at offset 2147352576
+128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 65536/65536 bytes at offset 2147418112
+64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+Image committed.
+read 196608/196608 bytes at offset 2147287040
+192 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 65536/65536 bytes at offset 2147287040
+64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 65536/65536 bytes at offset 2147352576
+64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 65536/65536 bytes at offset 2147418112
+64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+Offset          Length          File
+0x7ffd0000      0x30000         TEST_DIR/t.IMGFMT.base
+Offset          Length          File
+0x7ffd0000      0x10000         TEST_DIR/t.IMGFMT.base
+0x7ffe0000      0x20000         TEST_DIR/t.IMGFMT.itmd
+Offset          Length          File
+0x7ffd0000      0x10000         TEST_DIR/t.IMGFMT.base
+0x7ffe0000      0x10000         TEST_DIR/t.IMGFMT.itmd
+0x7fff0000      0x10000         TEST_DIR/t.IMGFMT
+
+=== Test pass 2.1 ===
+
+Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=2202009600
+Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202009600 backing_file=TEST_DIR/t.IMGFMT.base
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202009600 backing_file=TEST_DIR/t.IMGFMT.itmd
+wrote 196608/196608 bytes at offset 2147287040
+192 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 131072/131072 bytes at offset 2147352576
+128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 65536/65536 bytes at offset 2147418112
+64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+Image committed.
+read 196608/196608 bytes at offset 2147287040
+192 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 65536/65536 bytes at offset 2147287040
+64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 65536/65536 bytes at offset 2147352576
+64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 65536/65536 bytes at offset 2147418112
+64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+Offset          Length          File
+0x7ffd0000      0x30000         TEST_DIR/t.IMGFMT.base
+Offset          Length          File
+0x7ffd0000      0x10000         TEST_DIR/t.IMGFMT.base
+0x7ffe0000      0x20000         TEST_DIR/t.IMGFMT.itmd
+Offset          Length          File
+0x7ffd0000      0x10000         TEST_DIR/t.IMGFMT.base
+0x7ffe0000      0x10000         TEST_DIR/t.IMGFMT.itmd
+0x7fff0000      0x10000         TEST_DIR/t.IMGFMT
+
+=== Test pass 3.0 ===
+
+Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=2202009600
+Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202009600 backing_file=TEST_DIR/t.IMGFMT.base
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202009600 backing_file=TEST_DIR/t.IMGFMT.itmd
+wrote 196608/196608 bytes at offset 2147287040
+192 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 131072/131072 bytes at offset 2147352576
+128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 65536/65536 bytes at offset 2147418112
+64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+Image committed.
+read 65536/65536 bytes at offset 2147287040
+64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 65536/65536 bytes at offset 2147352576
+64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 65536/65536 bytes at offset 2147418112
+64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+Offset          Length          File
+0x7ffd0000      0x30000         TEST_DIR/t.IMGFMT.base
+Offset          Length          File
+0x7ffd0000      0x10000         TEST_DIR/t.IMGFMT.base
+0x7ffe0000      0x20000         TEST_DIR/t.IMGFMT.itmd
+Offset          Length          File
+0x7ffd0000      0x10000         TEST_DIR/t.IMGFMT.base
+0x7ffe0000      0x10000         TEST_DIR/t.IMGFMT.itmd
+0x7fff0000      0x10000         TEST_DIR/t.IMGFMT
+
+=== Test pass 3.1 ===
+
+Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=2202009600
+Formatting 'TEST_DIR/t.IMGFMT.itmd', fmt=IMGFMT size=2202009600 backing_file=TEST_DIR/t.IMGFMT.base
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202009600 backing_file=TEST_DIR/t.IMGFMT.itmd
+wrote 196608/196608 bytes at offset 2147287040
+192 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 131072/131072 bytes at offset 2147352576
+128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 65536/65536 bytes at offset 2147418112
+64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+Image committed.
+read 65536/65536 bytes at offset 2147287040
+64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 65536/65536 bytes at offset 2147352576
+64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 65536/65536 bytes at offset 2147418112
+64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+Offset          Length          File
+0x7ffd0000      0x30000         TEST_DIR/t.IMGFMT.base
+Offset          Length          File
+0x7ffd0000      0x10000         TEST_DIR/t.IMGFMT.base
+0x7ffe0000      0x20000         TEST_DIR/t.IMGFMT.itmd
+Offset          Length          File
+0x7ffd0000      0x10000         TEST_DIR/t.IMGFMT.base
+0x7ffe0000      0x10000         TEST_DIR/t.IMGFMT.itmd
+0x7fff0000      0x10000         TEST_DIR/t.IMGFMT
 *** done

tests/test-qga.c

@@ -837,6 +837,7 @@ static void test_qga_guest_exec(gconstpointer fix)
     int64_t pid, now, exitcode;
     gsize len;
     bool exited;
+    char *cmd;
 
     /* exec 'echo foo bar' */
     ret = qmp_fd(fixture->fd, "{'execute': 'guest-exec', 'arguments': {"
@@ -851,9 +852,10 @@ static void test_qga_guest_exec(gconstpointer fix)
 
     /* wait for completion */
     now = g_get_monotonic_time();
+    cmd = g_strdup_printf("{'execute': 'guest-exec-status',"
+                          " 'arguments': { 'pid': %" PRId64 " } }", pid);
     do {
-        ret = qmp_fd(fixture->fd, "{'execute': 'guest-exec-status',"
-                     " 'arguments': { 'pid': %" PRId64 "  } }", pid);
+        ret = qmp_fd(fixture->fd, cmd);
         g_assert_nonnull(ret);
         val = qdict_get_qdict(ret, "return");
         exited = qdict_get_bool(val, "exited");
@@ -863,6 +865,7 @@ static void test_qga_guest_exec(gconstpointer fix)
     } while (!exited &&
              g_get_monotonic_time() < now + 5 * G_TIME_SPAN_SECOND);
     g_assert(exited);
+    g_free(cmd);
 
     /* check stdout */
     exitcode = qdict_get_int(val, "exitcode");

tests/test-qobject-input-visitor.c

@@ -83,10 +83,11 @@ static Visitor *visitor_input_test_init_raw(TestInputVisitorData *data,
 static void test_visitor_in_int(TestInputVisitorData *data,
                                 const void *unused)
 {
-    int64_t res = 0, value = -42;
+    int64_t res = 0;
+    int value = -42;
     Visitor *v;
 
-    v = visitor_input_test_init(data, "%" PRId64, value);
+    v = visitor_input_test_init(data, "%d", value);
 
     visit_type_int(v, NULL, &res, &error_abort);
     g_assert_cmpint(res, ==, value);

ui/gtk.c

@@ -1581,6 +1581,9 @@ static void gd_change_page(GtkNotebook *nb, gpointer arg1, guint arg2,
                                        TRUE);
     }
     gtk_widget_set_sensitive(s->grab_item, on_vga);
+#ifdef CONFIG_VTE
+    gtk_widget_set_sensitive(s->copy_item, vc->type == GD_VC_VTE);
+#endif
 
     gd_update_windowsize(vc);
     gd_update_cursor(vc);
@@ -2246,6 +2249,11 @@ void gtk_display_init(DisplayState *ds, bool full_screen, bool grab_on_hover)
     }
 #endif
 
+#ifdef CONFIG_VTE
+    gtk_widget_set_sensitive(s->copy_item,
+                             gd_vc_find_current(s)->type == GD_VC_VTE);
+#endif
+
     if (full_screen) {
         gtk_menu_item_activate(GTK_MENU_ITEM(s->full_screen_item));
     }