Compare commits

...
257 Commits
Author SHA1 Message Date
Michael Roth d1b725ee12 Update version for 2.8.1.1 release
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-04-20 16:15:12 -05:00
Greg Kurz 96bae145e2 9pfs: local: set the path of the export root to "."
The local backend was recently converted to using "at*()" syscalls in order
to ensure all accesses happen below the shared directory. This requires that
we only pass relative paths, otherwise the dirfd argument to the "at*()"
syscalls is ignored and the path is treated as an absolute path in the host.
This is actually the case for paths in all fids, with the notable exception
of the root fid, whose path is "/". This causes the following backend ops to
act on the "/" directory of the host instead of the virtfs shared directory
when the export root is involved:
- lstat
- chmod
- chown
- utimensat

ie, chmod /9p_mount_point in the guest will be converted to chmod / in the
host for example. This could cause security issues with a privileged QEMU.

All "*at()" syscalls are being passed an open file descriptor. In the case
of the export root, this file descriptor points to the path in the host that
was passed to -fsdev.

The fix is thus as simple as changing the path of the export root fid to be
"." instead of "/".

This is CVE-2017-7471.

Cc: qemu-stable@nongnu.org
Reported-by: Léo Gaspard <leo@gaspard.io>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 9c6b899f7a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-04-20 15:56:00 -05:00
Michael Roth 7124ccf8b3 Update version for 2.8.1 release
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-30 23:02:53 -05:00
Sam Bobroff 08c48c731a spapr: fix off-by-one error in spapr_ovec_populate_dt()
The last byte of the option vector was missing due to an off-by-one
error. Without this fix, client architecture support negotiation will
fail because the last byte of option vector 5, which contains the MMU
support, will be missed.

Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
(cherry picked from commit fe93e3e6ec)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-30 15:45:06 -05:00
Gerd Hoffmann 12110bf70e seabios: update to 1.10.2 release
git shortlog rel-1.10.1..rel-1.10.2
===================================

Ben Warren (5):
      QEMU DMA: Add DMA write capability
      romfile-loader: Switch to using named structs
      QEMU fw_cfg: Add command to write back address of file
      QEMU fw_cfg: Add functions for accessing files by key
      QEMU fw_cfg: Write fw_cfg back on S3 resume

Kevin O'Connor (1):
      ps2port: Disable keyboard/mouse prior to resetting ps2 controller

Ladi Prosek (1):
      ahci: Set upper 32-bit registers to zero

Paul Menzel (1):
      vgasrc: Increase debug level

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 8779fccbef)
 * required for 98cb5dc: "ahci: advertise HOST_CAP_64"
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-30 14:53:59 -05:00
Eric Blake 07672ab003 qom: Fix regression with 'qom-type'
Commit 9a6d1ac assumed that 'qom-type' could be removed from QemuOpts
with no ill effects.  However, this command line proves otherwise:

$ ./x86_64-softmmu/qemu-system-x86_64 -nodefaults -nographic -qmp stdio \
  -object rng-random,filename=/dev/urandom,id=rng0 \
  -device virtio-rng-pci,rng=rng0
qemu-system-x86_64: -object rng-random,filename=/dev/urandom,id=rng0: Parameter 'qom-type' is missing

Fix the regression by restoring qom-type in opts after its temporary
removal that was needed for the duration of user_creatable_add_opts().

Reported-by: Richard W. M. Jones <rjones@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Message-id: 20170323160315.19696-1-eblake@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 0832970119)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-30 12:52:04 -05:00
Stefan Weil 877e2b016e target/s390x: Fix broken user mode
Returning NULL from get_max_cpu_model results in a SIGSEGV runtime error.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170130131517.8092-1-sw@weilnetz.de>
Cc: qemu-stable@nongnu.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
(cherry picked from commit a352aa62a7)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-30 12:47:49 -05:00
Eric Blake 2f8ab9b1dd qapi: Fix QemuOpts visitor regression on unvisited input
An off-by-one in commit 15c2f669e meant that we were failing to
check for unparsed input in all QemuOpts visitors.  Recent testsuite
additions show that fixing the obvious bug with bogus fields will
also fix the case of an incomplete list visit; update the tests to
match the new behavior.

Simple testcase:

./x86_64-softmmu/qemu-system-x86_64 -nodefaults -nographic -qmp stdio -numa node,size=1g

failed to diagnose that 'size' is not a valid argument to -numa, and
now once again reports:

qemu-system-x86_64: -numa node,size=1g: Invalid parameter 'size'

See also https://bugzilla.redhat.com/show_bug.cgi?id=1434666

CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170322144525.18964-4-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
(cherry picked from commit 21f88d021d)
 Conflicts:
	qapi/opts-visitor.c
	tests/test-opts-visitor.c
 * drop changes related to 9cb8ef36 and a9416dc6 tests
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-30 12:35:02 -05:00
Eric Blake c15c6d2594 qom: Avoid unvisited 'id'/'qom-type' in user_creatable_add_opts
A regression in commit 15c2f669e caused us to silently ignore
excess input to the QemuOpts visitor.  Later, commit ea4641
accidentally abused that situation, by removing "qom-type" and
"id" from the corresponding QDict but leaving them defined in
the QemuOpts, when using the pair of containers to create a
user-defined object. Note that since we are already traversing
two separate items (a QDict and a QemuOpts), we are already
able to flag bogus arguments, as in:

$ ./x86_64-softmmu/qemu-system-x86_64 -nodefaults -nographic -qmp stdio -object memory-backend-ram,id=mem1,size=4k,bogus=huh
qemu-system-x86_64: -object memory-backend-ram,id=mem1,size=4k,bogus=huh: Property '.bogus' not found

So the only real concern is that when we re-enable strict checking
in the QemuOpts visitor, we do not want to start flagging the two
leftover keys as unvisited.  Rearrange the code to clean out the
QemuOpts listing in advance, rather than removing items from the
QDict.  Since "qom-type" is usually an automatic implicit default,
we don't have to restore it (this does mean that once instantiated,
QemuOpts is not necessarily an accurate representation of the
original command line - but this is not the first place to do that);
however "id" has to be put back (requiring us to cast away a const).

[As a side note, hmp_object_add() turns a QDict into a QemuOpts,
then calls user_creatable_add_opts() which converts QemuOpts into
a new QDict. There are probably a lot of wasteful conversions like
this, but cleaning them up is a much bigger task than the immediate
regression fix.]

CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170322144525.18964-3-eblake@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
(cherry picked from commit 9a6d1acb3e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
(cherry picked from commit 7967e0bd9d8c4d7aae11383f9d9bad2ceaf9c2a2)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-30 12:30:29 -05:00
Igor Mammedov dd39c544f4 monitor: reuse user_creatable_add_opts() instead of user_creatable_add()
Simplify code by dropping ~57LOC by merging user_creatable_add()
into user_creatable_add_opts() and using the later from monitor.
Along with it allocate opts_visitor_new() once in user_creatable_add_opts().

As result we have one less API func and a more readable/simple
user_creatable_add_opts() vs user_creatable_add().

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1484052795-158195-3-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
(cherry picked from commit 3a4641054e)
* functional dep for 9a6d1ac
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-30 12:30:09 -05:00
Eric Blake 879b6454be tests: Expose regression in QemuOpts visitor
Commit 15c2f669e broke the ability of the QemuOpts visitor to
flag extra input parameters, but the regression went unnoticed
because of missing testsuite coverage.  Add a test to cover this;
take the approach already used in 9cb8ef3 of adding a test that
passes (to avoid breaking bisection) but marks with BUG the
behavior that we don't like, so that the actual impact of the
fix in a later patch is easier to see.

CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-Id: <20170322144525.18964-2-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
(cherry picked from commit 76861f6bef)
 Conflicts:
	tests/test-opts-visitor.c
 * drop context dep on 9cb8ef36 and a9416dc6 tests
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-30 12:28:35 -05:00
Paolo Bonzini ce37df91f4 virtio: always use handle_aio_output if registered
Commit ad07cd6 ("virtio-scsi: always use dataplane path if ioeventfd is
active", 2016-10-30) and 9ffe337 ("virtio-blk: always use dataplane
path if ioeventfd is active", 2016-10-30) broke the virtio 1.0
indirect access registers.

The indirect access registers bypass the ioeventfd, so that virtio-blk
and virtio-scsi now repeatedly try to initialize dataplane instead of
triggering the guest->host EventNotifier.  Detect the situation by
checking vq->handle_aio_output; if it is not NULL, trigger the
EventNotifier, which is how the device expects to get notifications
and in fact the only thread-safe manner to deliver them.

Fixes: ad07cd6
Fixes: 9ffe337
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit e49a661840)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-27 21:07:21 -05:00
Gerd Hoffmann dc35a13747 cirrus: fix off-by-one in cirrus_bitblt_rop_bkwd_transp_*_16
The switch from pointers to addresses (commit
026aeffcb4 and
ffaf857778) added
a off-by-one bug to 16bit backward blits.  Fix.

Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Li Qiang <liqiang6-s@360.cn>
Message-id: 1489735296-19047-1-git-send-email-kraxel@redhat.com
(cherry picked from commit f019722cbb)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-21 15:03:41 -05:00
Gerd Hoffmann a290442234 cirrus: stop passing around src pointers in the blitter
Does basically the same as "cirrus: stop passing around dst pointers in
the blitter", just for the src pointer instead of the dst pointer.

For the src we have to care about cputovideo blits though and fetch the
data from s->cirrus_bltbuf instead of vga memory.  The cirrus_src*()
helper functions handle that.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1489584487-3489-1-git-send-email-kraxel@redhat.com
(cherry picked from commit ffaf857778)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-21 15:03:35 -05:00
Gerd Hoffmann 031700e452 cirrus: stop passing around dst pointers in the blitter
Instead pass around the address (aka offset into vga memory).  Calculate
the pointer in the rop_* functions, after applying the mask to the
address, to make sure the address stays within the valid range.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1489574872-8679-1-git-send-email-kraxel@redhat.com
(cherry picked from commit 026aeffcb4)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-21 15:03:29 -05:00
Gerd Hoffmann 2f51fd1f73 cirrus: fix cirrus_invalidate_region
off_cur_end is exclusive, so off_cur_end == cirrus_addr_mask is valid.
Fix calculation to make sure to allow that, otherwise the assert added
by commit f153b563f8 can trigger for valid
blits.

Test case: boot windows nt 4.0

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1489579606-26020-1-git-send-email-kraxel@redhat.com
(cherry picked from commit e048dac616)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-21 15:03:23 -05:00
Gerd Hoffmann 63fdb09491 cirrus/vnc: zap bitblit support from console code.
There is a special code path (dpy_gfx_copy) to allow graphic emulation
notify user interface code about bitblit operations carryed out by
guests.  It is supported by cirrus and vnc server.  The intended purpose
is to optimize display scrolls and just send over the scroll op instead
of a full display update.

This is rarely used these days though because modern guests simply don't
use the cirrus blitter any more.  Any linux guest using the cirrus drm
driver doesn't.  Any windows guest newer than winxp doesn't ship with a
cirrus driver any more and thus uses the cirrus as simple framebuffer.

So this code tends to bitrot and bugs can go unnoticed for a long time.
See for example commit "3e10c3e vnc: fix qemu crash because of SIGSEGV"
which fixes a bug lingering in the code for almost a year, added by
commit "c7628bf vnc: only alloc server surface with clients connected".

Also the vnc server will throttle the frame rate in case it figures the
network can't keep up (send buffers are full).  This doesn't work with
dpy_gfx_copy, for any copy operation sent to the vnc client we have to
send all outstanding updates beforehand, otherwise the vnc client might
run the client side blit on outdated data and thereby corrupt the
display.  So this dpy_gfx_copy "optimization" might even make things
worse on slow network links.

Lets kill it once for all.

Oh, and one more reason: Turns out (after writing the patch) we have a
security bug in that code path ...

Fixes: CVE-2016-9603
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1489494419-14340-1-git-send-email-kraxel@redhat.com
(cherry picked from commit 50628d3479)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-21 15:03:15 -05:00
hangaohuai 3328c14e63 fix :cirrus_vga fix OOB read case qemu Segmentation fault
check the validity of parameters in cirrus_bitblt_rop_fwd_transp_xxx
and cirrus_bitblt_rop_fwd_xxx to avoid the OOB read which causes qemu Segmentation fault.

After the fix, we will touch the assert in
cirrus_invalidate_region:
assert(off_cur_end >= off_cur);

Signed-off-by: fangying <fangying1@huawei.com>
Signed-off-by: hangaohuai <hangaohuai@huawei.com>
Message-id: 20170314063919.16200-1-hangaohuai@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 215902d7b6)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-21 15:03:08 -05:00
Gerd Hoffmann a99fd943c4 Revert "cirrus: allow zero source pitch in pattern fill rops"
This reverts commit 5858dd1801.

Conflicts:
	hw/display/cirrus_vga.c

Cc: Wolfgang Bumiller <w.bumiller@proxmox.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-id: 1486645341-5010-2-git-send-email-kraxel@redhat.com
(cherry picked from commit 12e97ec399)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-21 15:02:34 -05:00
Gerd Hoffmann 670ddcc0aa cirrus: fix patterncopy checks
The blit_region_is_unsafe checks don't work correctly for the
patterncopy source.  It's a fixed-sized region, which doesn't
depend on cirrus_blt_{width,height}.  So go do the check in
cirrus_bitblt_common_patterncopy instead, then tell blit_is_unsafe that
it doesn't need to verify the source.  Also handle the case where we
blit from cirrus_bitbuf correctly.

This patch replaces 5858dd1801.

Security impact:  I think for the most part error on the safe side this
time, refusing blits which should have been allowed.

Only exception is placing the blit source at the end of the video ram,
so cirrus_blt_srcaddr + 256 goes beyond the end of video memory.  But
even in that case I'm not fully sure this actually allows read access to
host memory.  To trick the commit 5858dd18 security checks one has to
pick very small cirrus_blt_{width,height} values, which in turn implies
only a fraction of the blit source will actually be used.

Cc: Wolfgang Bumiller <w.bumiller@proxmox.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-id: 1486645341-5010-1-git-send-email-kraxel@redhat.com
(cherry picked from commit 95280c31cd)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-21 15:02:29 -05:00
Gerd Hoffmann 8db38049c6 cirrus: fix blit address mask handling
Apply the cirrus_addr_mask to cirrus_blt_dstaddr and cirrus_blt_srcaddr
right after assigning them, in cirrus_bitblt_start(), instead of having
this all over the place in the cirrus code, and missing a few places.

Reported-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1485338996-17095-1-git-send-email-kraxel@redhat.com
(cherry picked from commit 60cd23e851)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-21 15:01:12 -05:00
Wolfgang Bumiller 205a619563 cirrus: allow zero source pitch in pattern fill rops
The rops used by cirrus_bitblt_common_patterncopy only use
the destination pitch, so the source pitch shoul allowed to
be zero and the blit with used for the range check around the
source address.

Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Message-id: 1485272138-23249-1-git-send-email-w.bumiller@proxmox.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 5858dd1801)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-21 15:01:05 -05:00
Wolfgang Bumiller 5d26f91c89 cirrus: handle negative pitch in cirrus_invalidate_region()
cirrus_invalidate_region() calls memory_region_set_dirty()
on a per-line basis, always ranging from off_begin to
off_begin+bytesperline. With a negative pitch off_begin
marks the top most used address and thus we need to do an
initial shift backwards by a line for negative pitches of
backward blits, otherwise the first iteration covers the
line going from the start offset forwards instead of
backwards.
Additionally since the start address is inclusive, if we
shift by a full `bytesperline` we move to the first address
*not* included in the blit, so we only shift by one less
than bytesperline.

Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Message-id: 1485352137-29367-1-git-send-email-w.bumiller@proxmox.com

[ kraxel: codestyle fixes ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit f153b563f8)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-21 15:00:58 -05:00
Greg Kurz 1a184c3af3 9pfs: don't try to flush self and avoid QEMU hang on reset
According to the 9P spec [*], when a client wants to cancel a pending I/O
request identified by a given tag (uint16), it must send a Tflush message
and wait for the server to respond with a Rflush message before reusing this
tag for another I/O. The server may still send a completion message for the
I/O if it wasn't actually cancelled but the Rflush message must arrive after
that.

QEMU hence waits for the flushed PDU to complete before sending the Rflush
message back to the client.

If a client sends 'Tflush tag oldtag' and tag == oldtag, QEMU will then
allocate a PDU identified by tag, find it in the PDU list and wait for
this same PDU to complete... i.e. wait for a completion that will never
happen. This causes a tag and ring slot leak in the guest, and a PDU
leak in QEMU, all of them limited by the maximal number of PDUs (128).
But, worse, this causes QEMU to hang on device reset since v9fs_reset()
wants to drain all pending I/O.

This insane behavior is likely to denote a bug in the client, and it would
deserve an Rerror message to be sent back. Unfortunately, the protocol
allows it and requires all flush requests to suceed (only a Tflush response
is expected).

The only option is to detect when we have to handle a self-referencing
flush request and report success to the client right away.

[*] http://man.cat-v.org/plan_9/5/flush

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Greg Kurz <groug@kaod.org>
(cherry picked from commit d5f2af7b95)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-21 14:57:20 -05:00
Greg Kurz 7f515a96ab 9pfs: fix off-by-one error in PDU free list
The server can handle MAX_REQ - 1 PDUs at a time and the virtio-9p
device has a MAX_REQ sized virtqueue. If the client manages to fill
up the virtqueue, pdu_alloc() will fail and the request won't be
processed without any notice to the client (it actually causes the
linux 9p client to hang).

This has been there since the beginning (commit 9f10751365 "virtio-9p:
Add a virtio 9p device to qemu"), but it needs an agressive workload to
run in the guest to show up.

We actually allocate MAX_REQ PDUs and I see no reason not to link them
all into the free list, so let's fix the init loop.

Reported-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Suggested-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Greg Kurz <groug@kaod.org>
(cherry picked from commit 0d78289c3d)

Conflicts:
	hw/9pfs/9p.c

* drop context dep on 583f21f8

Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-21 14:53:30 -05:00
Richard Henderson d437262fa8 target-arm: Fix aarch64 vec_reg_offset
Since CPUARMState.vfp.regs is not 16 byte aligned, the ^ 8 fixup used
for a big-endian host doesn't do what's intended.  Fix this by adding
in the vfp.regs offset after computing the inter-register offset.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1481085020-2614-2-git-send-email-rth@twiddle.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 416d72b97b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-21 14:50:26 -05:00
Richard Henderson 74b13f92c2 target-arm: Fix aarch64 disas_ldst_single_struct
We add s->be_data within do_vec_ld/st.  Adding it here means that
we have the wrong bits set in SIZE for a big-endian host, leading
to g_assert_not_reached in write_vec_element and read_vec_element.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1481085020-2614-3-git-send-email-rth@twiddle.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 0a97c40f8e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-21 14:50:19 -05:00
Richard Henderson 4bcb497c7e linux-user: Fix s390x safe-syscall for z900
The LT instruction was added in the extended immediate facility
introduced with the z9-109 processor.

Cc: Riku Voipio <riku.voipio@iki.fi>
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes: c9bc3437a9
Suggested-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
(cherry picked from commit 6cde51769e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-21 14:50:14 -05:00
Vladimir Sementsov-Ogievskiy 8029d55a93 nbd/client: fix drop_sync [CVE-2017-2630]
Comparison symbol is misused. It may lead to memory corruption.
Introduced in commit 7d3123e.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170203154757.36140-6-vsementsov@virtuozzo.com>
[eblake: add CVE details, update conditional]
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170307151627.27212-1-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

(cherry picked from commit 2563c9c6b8)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-21 14:49:59 -05:00
Peter Lieven a3aeb9f09d thread-pool: add missing qemu_bh_cancel in completion function
commit 3c80ca15 fixed a deadlock scenarion with nested aio_poll invocations.

However, the rescheduling of the completion BH introcuded unnecessary spinning
in the main-loop. On very fast file backends this can even lead to the
"WARNING: I/O thread spun for 1000 iterations" message popping up.

Callgrind reports about 3-4% less instructions with this patch running
qemu-img bench on a ramdisk based VMDK file.

Fixes: 3c80ca158c
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit b7a745dc33)
* drop context dep on b9e413d
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-20 14:57:35 -05:00
Dong Jia Shi 34e9c09d03 s390x/css: reassign subchannel if schid is changed after migration
The subchannel is a means to access a device. While the device number is
assigned by the administrator, the subchannel number is assigned by
the channel subsystem in an ascending order on cold and hot plug.
When doing unplug and replug operations, the same device may end up on
a different subchannel; for example

- We start with a device fe.1.2222, which ends up at subchannel
  fe.1.0000.
- Now we detach the device, attach a device fe.1.3333 (which would get
  the now-free subchannel fe.1.0000), re-attach fe.1.2222 (which ends
  up at subchannel fe.1.0001) and detach fe.1.3333.
- We now have the same device (fe.1.2222) available to the guest; it
  just shows up on a different subchannel.

In such a case, the subchannel numbers are different from what a
QEMU would create during cold plug when parsing the command line.

As this would cause a guest visible change on migration, we do restore
the source system's value of the subchannel number on load.

So we are now fine from the guest perspective. From the host
perspective this will cause an inconsistent state in our internal data
structures, though.

For example, the subchannel 0 might not be at array position 0. This will
lead to problems when we continue doing hot (un/re) plug operations.

Let's fix this by cleaning up our internal data structures.

Reported-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
(cherry picked from commit 3c788ebc6f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-20 14:26:46 -05:00
Jason Wang 9e9483dea9 virtio-pci: reset modern vq meta data
We don't reset proxy->vqs[].{num|desc[]|avail[]|used[]}. This means if
a driver enable the vq without setting vq address after reset. The old
addresses were leaked. Fixing this by resetting modern vq meta data
during device reset.

Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 60a8d80234)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:42 -05:00
Li Qiang ba9c51d225 scsi: mptsas: fix the wrong reading size in fetch request
When fetching request, it should read sizeof(*hdr), not the
pointer hdr.

Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Message-Id: <1489488980-130668-1-git-send-email-liqiang6-s@360.cn>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit b01a2d07c9)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:42 -05:00
Paolo Bonzini 495756ef9d e1000e: correctly tear down MSI-X memory regions
MSI-X has been disabled by the time the e1000e device is unrealized, hence
msix_uninit is never called.  This causes the object to be leaked, which
shows up as a RAMBlock with empty name when attempting migration.

Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 7ec7ae4b97)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:42 -05:00
Dmitry Fleytman 9ad26963bf NetRxPkt: Account buffer with ETH header in IOV length
In case of VLAN stripping ETH header is stored in a
separate chunk and length of IOV should take this into
account.

This patch fixes checksum validation for RX packets
with VLAN header.

Devices affected by this problem: e1000e and vmxnet3.

Cc: qemu-stable@nongnu.org
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit c5d083c561)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:42 -05:00
Dmitry Fleytman 15ad066065 NetRxPkt: Do not try to pull more data than present
In case of VLAN stripping, ETH header put into a
separate buffer, therefore amont of data copied
from original IOV should be smaller.

Cc: qemu-stable@nongnu.org
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit d5e772146d)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:41 -05:00
Dmitry Fleytman 7cfd9c114b NetRxPkt: Fix memory corruption on VLAN header stripping
This patch fixed a problem that was introduced in commit eb700029.

When net_rx_pkt_attach_iovec() calls eth_strip_vlan()
this can result in pkt->ehdr_buf being overflowed, because
ehdr_buf is only sizeof(struct eth_header) bytes large
but eth_strip_vlan() can write
sizeof(struct eth_header) + sizeof(struct vlan_header)
bytes into it.

Devices affected by this problem: vmxnet3.

Cc: qemu-stable@nongnu.org
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit df8bf7a7fe)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:41 -05:00
Dmitry Fleytman bddf2232fc eth: Extend vlan stripping functions
Make VLAN stripping functions return number of bytes
copied to given Ethernet header buffer.

This information should be used to re-compose
packet IOV after VLAN stripping.

Cc: qemu-stable@nongnu.org
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 566342c312)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:41 -05:00
Gerd Hoffmann fc8e94c3e5 cirrus: add blit_is_unsafe call to cirrus_bitblt_cputovideo (CVE-2017-2620)
CIRRUS_BLTMODE_MEMSYSSRC blits do NOT check blit destination
and blit width, at all.  Oops.  Fix it.

Security impact: high.

The missing blit destination check allows to write to host memory.
Basically same as CVE-2014-8106 for the other blit variants.

Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 92f2b88cea)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:41 -05:00
Eric Blake 5e4641777c hmp: fix block_set_io_throttle
Commit 7a9877a made the 'device' parameter to BlockIOThrottle
optional, favoring 'id' instead.  But it forgot to update the
HMP usage to set has_device, which makes all attempts to change
throttling via HMP fail with "Need exactly one of 'device' and 'id'"

CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170120230359.4244-1-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
(cherry picked from commit 3f35c3b166)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:41 -05:00
Peter Lieven d5506b3128 qga: ignore EBUSY when freezing a filesystem
the current implementation fails if we try to freeze an
already frozen filesystem. This can happen if a filesystem
is mounted more than once (e.g. with a bind mount).

Suggested-by: Christian Theune <ct@flyingcircus.io>
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
(cherry picked from commit ce2eb6c4a0)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:41 -05:00
Paolo Bonzini 823fb688eb target-i386: correctly propagate retaddr into SVM helpers
Commit 2afbdf8 ("target-i386: exception handling for memory helpers",
2015-09-15) changed tlb_fill's cpu_restore_state+raise_exception_err
to raise_exception_err_ra.  After this change, the cpu_restore_state
and raise_exception_err's cpu_loop_exit are merged into
raise_exception_err_ra's cpu_loop_exit_restore.

This actually fixed some bugs, but when SVM is enabled there is a
second path from raise_exception_err_ra to cpu_loop_exit.  This is
the VMEXIT path, and now cpu_vmexit is called without a
cpu_restore_state before.

The fix is to pass the retaddr to cpu_vmexit (via
cpu_svm_check_intercept_param).  All helpers can now use GETPC() to pass
the correct retaddr, too.

Cc: qemu-stable@nongnu.org
Fixes: 2afbdf8480
Reported-by: Alexander Boettcher <alexander.boettcher@genode-labs.com>
Tested-by: Alexander Boettcher <alexander.boettcher@genode-labs.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 65c9d60a3a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:41 -05:00
Pavel Dovgalyuk 270a46ea0d apic: reset apic_delivered global variable on machine reset
This patch adds call to apic_reset_irq_delivered when the virtual
machine is reset.

Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20170131114054.276.62201.stgit@PASHA-ISP>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit f65e821262)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:41 -05:00
Richard Henderson f61f76cb3f target/sparc: Restore ldstub of odd asis
Fixes the booting of ss20 roms.

Cc: qemu-stable@nongnu.org
Reported-by: Michael Russo <mike@papersolve.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <rth@twiddle.net>
(cherry picked from commit 3db010c339)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:41 -05:00
QingFeng Hao 8ac427cdd0 block/vmdk: Fix the endian problem of buf_len and lba
The problem was triggered by qemu-iotests case 055. It failed when it
was comparing the compressed vmdk image with original test.img.

The cause is that buf_len in vmdk_write_extent wasn't converted to
little-endian before it was stored to disk. But later vmdk_read_extent
read it and converted it from little-endian to cpu endian.
If the cpu is big-endian like s390, the problem will happen and
the data length read by vmdk_read_extent will become invalid!
The fix is to add the conversion in vmdk_write_extent, meanwhile,
repair the endianness problem of lba field which shall also be converted
to little-endian before storing to disk.

Cc: qemu-stable@nongnu.org
Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20161216052040.53067-2-haoqf@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
(cherry picked from commit 4545d4f4af)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:41 -05:00
Sam Bobroff 1d1d9226d8 target-ppc, tcg: fix usermode segfault with pthread_create()
Programs run under qemu-ppc64 on an x86_64 host currently segfault
if they use pthread_create() due to the adjustment made to the NIP in
commit bd6fefe71c.

This patch changes cpu_loop() to set the NIP back to the
pre-incremented value before calling do_syscall(), which causes the
correct address to be used for the new thread and corrects the fault.

Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
(cherry picked from commit 2635531f20)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:41 -05:00
Michael Tokarev adf2c47aa2 vnc: do not disconnect on EAGAIN
When qemu vnc server is trying to send large update to clients,
there might be a situation when system responds with something
like EAGAIN, indicating that there's no system memory to send
that much data (depending on the network speed, client and server
and what is happening).  In this case, something like this happens
on qemu side (from strace):

sendmsg(16, {msg_name(0)=NULL,
        msg_iov(1)=[{"\244\"..., 729186}],
        msg_controllen=0, msg_flags=0}, 0) = 103950
sendmsg(16, {msg_name(0)=NULL,
        msg_iov(1)=[{"lz\346"..., 1559618}],
        msg_controllen=0, msg_flags=0}, 0) = -1 EAGAIN
sendmsg(-1, {msg_name(0)=NULL,
        msg_iov(1)=[{"lz\346"..., 1559618}],
        msg_controllen=0, msg_flags=0}, 0) = -1 EBADF

qemu closes the socket before the retry, and obviously it gets EBADF
when trying to send to -1.

This is because there WAS a special handling for EAGAIN, but now it doesn't
work anymore, after commit 04d2529da2, because
now in all error-like cases we initiate vnc disconnect.

This change were introduced in qemu 2.6, and caused numerous grief for many
people, resulting in their vnc clients reporting sporadic random disconnects
from vnc server.

Fix that by doing the disconnect only when necessary, i.e. omitting this
very case of EAGAIN.

Hopefully the existing condition (comparing with QIO_CHANNEL_ERR_BLOCK)
is sufficient, as the original code (before the above commit) were
checking for other errno values too.

Apparently there's another (semi?)bug exist somewhere here, since the
code tries to write to fd# -1, it probably should check if the connection
is open before. But this isn't important.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1486115549-9398-1-git-send-email-mjt@msgid.tls.msk.ru
Fixes: 04d2529da2
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 537848ee62)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:41 -05:00
Prasad J Pandit 1a156ae5d1 sd: sdhci: check data length during dma_memory_read
While doing multi block SDMA transfer in routine
'sdhci_sdma_transfer_multi_blocks', the 's->fifo_buffer' starting
index 'begin' and data length 's->data_count' could end up to be same.
This could lead to an OOB access issue. Correct transfer data length
to avoid it.

Cc: qemu-stable@nongnu.org
Reported-by: Jiang Xin <jiangxin1@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20170130064736.9236-1-ppandit@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 42922105be)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:40 -05:00
Peter Lieven 3b8f27fe0b block/nfs: fix naming of runtime opts
commit 94d6a7a accidentally left the naming of runtime opts and QAPI
scheme inconsistent. As one consequence passing of parameters in the
URI is broken. Sync the naming of the runtime opts to the QAPI
scheme.

Please note that this is technically backwards incompatible with the 2.8
release, but the 2.8 release is the only version that had the wrong naming.
Furthermore release 2.8 suffered from a NULL pointer dereference during
URI parsing.

Fixes: 94d6a7a76e
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-id: 1485942829-10756-3-git-send-email-pl@kamp.de
[mreitz: Fixed commit message]
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>

(cherry picked from commit f67409a5bb)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:40 -05:00
Peter Lieven 44d24c7b4a block/nfs: fix NULL pointer dereference in URI parsing
parse_uint_full wants to put the parsed value into the
variable passed via its second argument which is NULL.

Fixes: 94d6a7a76e
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1485942829-10756-2-git-send-email-pl@kamp.de
Signed-off-by: Max Reitz <mreitz@redhat.com>
(cherry picked from commit 8d20abe87a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:40 -05:00
Christian Borntraeger 5f4b9013e6 s390x/kvm: fix small race reboot vs. cmma
Right now we reset all devices before we reset the cmma states.  This
can result in the host kernel discarding guest pages that were
previously in the unused state but already contain a bios or a -kernel
file before the cmma reset has finished.  This race results in random
guest crashes or hangs during very early reboot.

Fixes: 1cd4e0f6f0 ("s390x/cmma: clean up cmma reset")
Cc: qemu-stable@nongnu.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
(cherry picked from commit 1a0e4c8b02)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:40 -05:00
David Hildenbrand 5e40f283e5 target/s390x: use "qemu" cpu model in user mode
"any" does not exist, therefore resulting in a misleading error message.

Reported-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170130145025.26475-1-david@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Alexander Graf <agraf@suse.de>
Cc: qemu-stable@nongnu.org
(cherry picked from commit d8923bc754)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:40 -05:00
Ladi Prosek d2b9063eb8 ahci: advertise HOST_CAP_64
The AHCI emulation code supports 64-bit addressing and should advertise this
fact in the Host Capabilities register. Both Linux and Windows drivers test
this bit to decide if the upper 32 bits of various registers may be written
to, and at least some versions of Windows have a bug where DMA is attempted
with an address above 4GB but, in the absence of HOST_CAP_64, the upper 32
bits are left unititialized which leads to a memory corruption.

[Maintainer edit:

This fixes https://bugzilla.redhat.com/show_bug.cgi?id=1411105,
which affects Windows Server 2008 SP2 in some cases.]

Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-id: 1484305370-6220-1-git-send-email-lprosek@redhat.com
[Amended commit message --js]
Signed-off-by: John Snow <jsnow@redhat.com>

(cherry picked from commit 98cb5dccb1)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:40 -05:00
Paolo Bonzini d8dea6fbcb cpu-exec: fix icount out-of-bounds access
When icount is active, tb_add_jump is surprisingly called with an
out of bounds basic block index.  I have no idea how that can work,
but it does not seem like a good idea.  Clear *last_tb for all
TB_EXIT_ICOUNT_EXPIRED cases, even when all you have to do is
refill icount_extra.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 43d70ddf9f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:40 -05:00
Li Qiang f054cead44 cirrus: fix oob access issue (CVE-2017-2615)
When doing bitblt copy in backward mode, we should minus the
blt width first just like the adding in the forward mode. This
can avoid the oob access of the front of vga's vram.

Signed-off-by: Li Qiang <liqiang6-s@360.cn>

{ kraxel: with backward blits (negative pitch) addr is the topmost
          address, so check it as-is against vram size ]

Cc: qemu-stable@nongnu.org
Cc: P J P <ppandit@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Wolfgang Bumiller <w.bumiller@proxmox.com>
Fixes: d3532a0db0 (CVE-2014-8106)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1485938101-26602-1-git-send-email-kraxel@redhat.com
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
(cherry picked from commit 62d4c6bd52)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:40 -05:00
Christian Borntraeger 5fb07a7b6c s390x/kvm: fix cmma reset for KVM
We must reset the CMMA states for normal memory (when not on mem path),
but the current code does the opposite. This was unnoticed for some time
as the kernel since 4.6 also had a bug which mostly disabled the paging
optimizations.

Fixes: 07059effd1 ("s390x/kvm: let the CPU model control CMM(A)")
Cc: qemu-stable@nongnu.org # v2.8
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
(cherry picked from commit 0cf4d747cb)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:40 -05:00
Peter Lieven 3fb4b3c371 block/iscsi: avoid data corruption with cache=writeback
nb_cls_shrunk in iscsi_allocmap_update can become -1 if the
request starts and ends within the same cluster. This results
in passing -1 to bitmap_set and bitmap_clear and they don't
handle negative values properly. In the end this leads to data
corruption.

Fixes: e1123a3b40
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1484579832-18589-1-git-send-email-pl@kamp.de>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 1da45e0c4c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:40 -05:00
Michael S. Tsirkin a626117f6a virtio: fix up max size checks
Coverity reports that ARRAY_SIZE(elem->out_sg) (and all the others too)
is wrong because elem->out_sg is a pointer.

However, the check is not in the right place and the max_size argument
of virtqueue_map_iovec can be removed.  The check on in_num/out_num
should be moved to qemu_get_virtqueue_element instead, before the call
to virtqueue_alloc_element.

Cc: qemu-stable@nongnu.org
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes: 3724650db0 ("virtio: introduce virtqueue_alloc_element")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
(cherry picked from commit 6bdc21c050)
* dropped context dep on 8607f5c30
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:40 -05:00
Daniel P. Berrange 3b33cba69c ui: use evdev keymap when running under wayland
Wayland always uses evdev as its input source, so QEMU
can use the existing evdev keymap data

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Tested-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20161201094117.16407-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit a8ffb372a2)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:40 -05:00
Richard Henderson 50b468d421 tcg/aarch64: Fix tcg_out_movi
There were some patterns, like 0x0000_ffff_ffff_00ff, for which we
would select to begin a multi-insn sequence with MOVN, but would
fail to set the 0x0000 lane back from 0xffff.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20161207180727.6286-3-rth@twiddle.net>
(cherry picked from commit 8cf9a3d3f7)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:39 -05:00
Richard Henderson 028fbea477 tcg/aarch64: Fix addsub2 for 0+C
When al == xzr, we cannot use addi/subi because that encodes xsp.
Force a zero into the temp register for that (rare) case.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20161207180727.6286-2-rth@twiddle.net>
(cherry picked from commit b1eb20da62)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:39 -05:00
Marc-André Lureau 6e8052f967 char: fix ctrl-a b not working
CharDriverState.be should be updated to point to the current
associated backend.

Fix the regression introduced in the "mux" chardev from commit
a4afa548fc.

https://bugs.launchpad.net/bugs/1654137

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170110110621.15287-1-marcandre.lureau@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit fb5e19d2e1)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:39 -05:00
Peter Xu 5c60c6ef61 x86: ioapic: fix fail migration when irqchip=split
Split irqchip works based on the fact that we kept the first 24 gsi
routing entries inside KVM for userspace ioapic's use. When system
boot, we'll reserve these MSI routing entries before hand. However,
after migration, we forgot to re-configure it up in the destination
side. The result is, we'll get invalid gsi routing entries after
migration (all empty), and we get interrupts with vector=0, then
strange things happen, like keyboard hang.

The solution is simple - we update them after migration, which is a
one line fix.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1483952153-7221-4-git-send-email-peterx@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 0f254b1ae0)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:39 -05:00
Bruce Rogers 2ab8276a1c display: cirrus: ignore source pitch value as needed in blit_is_unsafe
Commit 4299b90 added a check which is too broad, given that the source
pitch value is not required to be initialized for solid fill operations.
This patch refines the blit_is_unsafe() check to ignore source pitch in
that case. After applying the above commit as a security patch, we
noticed the SLES 11 SP4 guest gui failed to initialize properly.

Signed-off-by: Bruce Rogers <brogers@suse.com>
Message-id: 20170109203520.5619-1-brogers@suse.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 913a87885f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:39 -05:00
Roman Kapl 662a97d74f exec: Add missing rcu_read_unlock
rcu_read_unlock was not called if the address_space_access_valid result is
negative.

This caused (at least) a problem when qemu on PPC/E500+TAP failed to terminate
properly and instead got stuck in a deadlock.

Signed-off-by: Roman Kapl <rka@sysgo.com>
Message-Id: <20170109110921.4931-1-rka@sysgo.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 5ad4a2b75f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:39 -05:00
Gonglei d6f119475d virtio-crypto: fix possible integer and heap overflow
Because the 'size_t' type is 4 bytes in 32-bit platform, which
is the same with 'int'. It's easy to make 'max_len' to zero when
integer overflow and then cause heap overflow if 'max_len' is zero.

Using uint_64 instead of size_t to avoid the integer overflow.

Cc: qemu-stable@nongnu.org
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Tested-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit a08aaff811)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:39 -05:00
Caoxinhua f47bf0823b qemu-thread: fix qemu_thread_set_name() race in qemu_thread_create()
QEMU will crash with the follow backtrace if the new created thread exited before
we call qemu_thread_set_name() for it.

  (gdb) bt
  #0 0x00007f9a68b095d7 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56
  #1 0x00007f9a68b0acc8 in __GI_abort () at abort.c:90
  #2 0x00007f9a69cda389 in PAT_abort () from /usr/lib64/libuvpuserhotfix.so
  #3 0x00007f9a69cdda0d in patchIllInsHandler () from /usr/lib64/libuvpuserhotfix.so
  #4 <signal handler called>
  #5 pthread_setname_np (th=140298470549248, name=name@entry=0x8cc74a "io-task-worker") at ../nptl/sysdeps/unix/sysv/linux/pthread_setname.c:49
  #6 0x00000000007f5f20 in qemu_thread_set_name (thread=thread@entry=0x7ffd2ac09680, name=name@entry=0x8cc74a "io-task-worker") at util/qemu_thread_posix.c:459
  #7 0x00000000007f679e in qemu_thread_create (thread=thread@entry=0x7ffd2ac09680, name=name@entry=0x8cc74a "io-task-worker",start_routine=start_routine@entry=0x7c1300 <qio_task_thread_worker>, arg=arg@entry=0x7f99b8001720, mode=mode@entry=1) at util/qemu_thread_posix.c:498
  #8 0x00000000007c15b6 in qio_task_run_in_thread (task=task@entry=0x7f99b80033d0, worker=worker@entry=0x7bd920 <qio_channel_socket_connect_worker>, opaque=0x7f99b8003370, destroy=0x7c6220 <qapi_free_SocketAddress>) at io/task.c:133
  #9 0x00000000007bda04 in qio_channel_socket_connect_async (ioc=0x7f99b80014c0, addr=0x37235d0, callback=callback@entry=0x54ad00 <qemu_chr_socket_connected>, opaque=opaque@entry=0x38118b0, destroy=destroy@entry=0x0) at io/channel_socket.c:191
  #10 0x00000000005487f6 in socket_reconnect_timeout (opaque=0x38118b0) at qemu_char.c:4402
  #11 0x00007f9a6a1533b3 in g_timeout_dispatch () from /usr/lib64/libglib-2.0.so.0
  #12 0x00007f9a6a15299a in g_main_context_dispatch () from /usr/lib64/libglib-2.0.so.0
  #13 0x0000000000747386 in glib_pollfds_poll () at main_loop.c:227
  #14 0x0000000000747424 in os_host_main_loop_wait (timeout=404000000) at main_loop.c:272
  #15 0x0000000000747575 in main_loop_wait (nonblocking=nonblocking@entry=0) at main_loop.c:520
  #16 0x0000000000557d31 in main_loop () at vl.c:2170
  #17 0x000000000041c8b7 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:5083

Let's detach the new thread after calling qemu_thread_set_name().

Signed-off-by: Caoxinhua <caoxinhua@huawei.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-Id: <1483493521-9604-1-git-send-email-zhang.zhanghailiang@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 2f75bd73c3)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:39 -05:00
Thomas Huth 8a6562592f ui/vnc: Fix problem with sending too many bytes as server name
If the buffer is not big enough, snprintf() does not return the number
of bytes that have been written to the buffer, but the number of bytes
that would be needed for writing the whole string. By using this value
for the following vnc_write() calls, we send some junk at the end of
the name in case the qemu_name is longer than 1017 bytes, which could
confuse the VNC clients. Fix this by adding an additional size check
here.

Buglink: https://bugs.launchpad.net/qemu/+bug/1637447
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1479749115-21932-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 97efe4f961)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:39 -05:00
Paolo Bonzini 9f6cb916f2 scsi-block: fix direction of BYTCHK test for VERIFY commands
The direction is wrong; scsi_block_is_passthrough returns
false for commands that *can* use sglists.

Reported-by: Zhang Qian <zhangqian@sangfor.com.cn>
Fixes: 8fdc7839e4
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 1f8af0d186)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:39 -05:00
Hervé Poussineau dc659e3aea ui/gtk: fix crash at startup when no console is available
This patch fixes a segfault at QEMU startup, introduced in a08156321a.
gd_vc_find_current() return NULL, which is dereferenced without checking it.

While at it, disable the whole 'View' menu if no console exists.

Reproducer: qemu-system-i386 -M none -nodefaults

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1483263585-8101-1-git-send-email-hpoussin@reactos.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 3d4da9d6f3)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:39 -05:00
Igor Mammedov 87ede19db3 pc: fix crash in rtc_set_memory() if initial cpu is marked as hotplugged
'hotplugged' propperty is meant to be used on migration side when migrating
source with hotplugged devices.
However though it not exacly correct usage of 'hotplugged' property
it's possible to set generic hotplugged property for CPU using
 -cpu foo,hotplugged=on
or
 -global foo.hotplugged=on

in this case qemu crashes with following backtrace:

...

because pc_cpu_plug() assumes that hotplugged CPU could appear only after
rtc/fw_cfg are initialized.
Fix crash by replacing assumption with explicit checks of rtc/fw_cfg
and updating them only if they were initialized.

Cc: qemu-stable@nongnu.org
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1483108391-199542-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 26ef65beab)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:39 -05:00
Greg Kurz da95bfe06b 9pfs: fix crash when fsdev is missing
If the user passes -device virtio-9p without the corresponding -fsdev, QEMU
dereferences a NULL pointer and crashes.

This is a 2.8 regression introduced by commit 702dbcc274.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
(cherry picked from commit f2b58c4375)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:39 -05:00
Halil Pasic 7830be742a virtio: fix vq->inuse recalc after migr
Correct recalculation of vq->inuse after migration for the corner case
where the avail_idx has already wrapped but used_idx not yet.

Also change the type of the VirtQueue.inuse to unsigned int. This is
done to be consistent with other members representing sizes (VRing.num),
and because C99 guarantees max ring size < UINT_MAX but does not
guarantee max ring size < INT_MAX.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Fixes: bccdef6b ("virtio: recalculate vq->inuse after migration")
CC: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit e66bcc4081)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:38 -05:00
Michael S. Tsirkin 620a65dc44 pci: fix error message for express slots
PCI Express downstream slot has a single PCI slot
behind it, using PCI_DEVFN(PCI_SLOT(devfn), 0)
does not give you function 0 in cases such as ARI
as well as some error cases.

This is exactly what we are hitting:
   $ qemu-system-x86_64 -machine q35 -readconfig docs/q35-chipset.cfg
-monitor stdio
   (qemu) device_add e1000e,bus=ich9-pcie-port-4,addr=00
   (qemu) device_add e1000e,bus=ich9-pcie-port-4,addr=08
   Segmentation fault (core dumped)

The fix is to use the pci_get_function_0 API.

Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Tested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
(cherry picked from commit d93ddfb1f8)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:38 -05:00
Dr. David Alan Gilbert 9d14f0cd65 balloon: Don't balloon roms
A broken guest can specify physical addresses that correspond
to any memory region, but it shouldn't be able to change ROM.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: qemu-stable@nongnu.org
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit f2fd57db36)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:38 -05:00
Eduardo Habkost 04cde530be machine: Convert abstract typename on compat_props to subclass names
Original problem description by Greg Kurz:

> Since commit "9a4c0e220d8a hw/virtio-pci: fix virtio
> behaviour", passing -device virtio-blk-pci.disable-modern=off
> has no effect on 2.6 machine types because the internal
> virtio-pci.disable-modern=on compat property always prevail.

The same bug also affects other abstract type names mentioned on
compat_props by machine-types: apic-common, i386-cpu, pci-device,
powerpc64-cpu, s390-skeys, spapr-pci-host-bridge, usb-device,
virtio-pci, x86_64-cpu.

The right fix for this problem is to make sure compat_props and
-global options are always applied in the order they are
registered, instead of reordering them based on the type
hierarchy. But changing the ordering rules of -global is risky
and might break existing configurations, so we shouldn't do that
on a stable branch.

This is a temporary hack that will work around the bug when
registering compat_props properties: if we find an abstract class
on compat_props, register properties for all its non-abstract
subtypes instead. This will make sure -global won't be overridden
by compat_props, while keeping the existing ordering rules on
-global options.

Note that there's one case that won't be fixed by this hack:
"-global spapr-pci-vfio-host-bridge.<option>=<value>" won't be
able to override compat_props, because spapr-pci-host-bridge is
not an abstract class.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1481575745-26120-1-git-send-email-ehabkost@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
(cherry picked from commit 0bcba41fe3)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:10:38 -05:00
Greg Kurz a15785cfbd 9pfs: fix vulnerability in openat_dir() and local_unlinkat_common()
We should pass O_NOFOLLOW otherwise openat() will follow symlinks and make
QEMU vulnerable.

While here, we also fix local_unlinkat_common() to use openat_dir() for
the same reasons (it was a leftover in the original patchset actually).

This fixes CVE-2016-9602.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit b003fc0d8a)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:08:57 -05:00
Greg Kurz 3731a25a62 9pfs: fix O_PATH build break with older glibc versions
When O_PATH is used with O_DIRECTORY, it only acts as an optimization: the
openat() syscall simply finds the name in the VFS, and doesn't trigger the
underlying filesystem.

On systems that don't define O_PATH, because they have glibc version 2.13
or older for example, we can safely omit it. We don't want to deactivate
O_PATH globally though, in case it is used without O_DIRECTORY. The is done
with a dedicated macro.

Systems without O_PATH may thus fail to resolve names that involve
unreadable directories, compared to newer systems succeeding, but such
corner case failure is our only option on those older systems to avoid
the security hole of chasing symlinks inappropriately.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
(added last paragraph to changelog as suggested by Eric Blake)
Signed-off-by: Greg Kurz <groug@kaod.org>

(cherry picked from commit 918112c02a)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:08:53 -05:00
Greg Kurz 7e9a1c4914 9pfs: don't use AT_EMPTY_PATH in local_set_cred_passthrough()
The name argument can never be an empty string, and dirfd always point to
the containing directory of the file name. AT_EMPTY_PATH is hence useless
here. Also it breaks build with glibc version 2.13 and older.

It is actually an oversight of a previous tentative patch to implement this
function. We can safely drop it.

Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Greg Kurz <groug@kaod.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit b314f6a077)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:08:50 -05:00
Greg Kurz 059f751ec2 9pfs: fail local_statfs() earlier
If we cannot open the given path, we can return right away instead of
passing -1 to fstatfs() and close(). This will make Coverity happy.

(Coverity issue CID1371729)

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Daniel P. berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
(cherry picked from commit 23da0145cc)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:08:47 -05:00
Greg Kurz bb07a379b5 9pfs: fix fd leak in local_opendir()
Coverity issue CID1371731

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
(cherry picked from commit faab207f11)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:08:44 -05:00
Greg Kurz 719e6dd171 9pfs: fix bogus fd check in local_remove()
This was spotted by Coverity as a fd leak. This is certainly true, but also
local_remove() would always return without doing anything, unless the fd is
zero, which is very unlikely.

(Coverity issue CID1371732)

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit b7361d46e7)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:08:41 -05:00
Greg Kurz 05a92c2005 9pfs: local: drop unused code
Now that the all callbacks have been converted to use "at" syscalls, we
can drop this code.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit c23d5f1d5b)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:08:33 -05:00
Greg Kurz 9c5cb58970 9pfs: local: open2: don't follow symlinks
The local_open2() callback is vulnerable to symlink attacks because it
calls:

(1) open() which follows symbolic links for all path elements but the
    rightmost one
(2) local_set_xattr()->setxattr() which follows symbolic links for all
    path elements
(3) local_set_mapped_file_attr() which calls in turn local_fopen() and
    mkdir(), both functions following symbolic links for all path
    elements but the rightmost one
(4) local_post_create_passthrough() which calls in turn lchown() and
    chmod(), both functions also following symbolic links

This patch converts local_open2() to rely on opendir_nofollow() and
mkdirat() to fix (1), as well as local_set_xattrat(),
local_set_mapped_file_attrat() and local_set_cred_passthrough() to
fix (2), (3) and (4) respectively. Since local_open2() already opens
a descriptor to the target file, local_set_cred_passthrough() is
modified to reuse it instead of opening a new one.

The mapped and mapped-file security modes are supposed to be identical,
except for the place where credentials and file modes are stored. While
here, we also make that explicit by sharing the call to openat().

This partly fixes CVE-2016-9602.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit a565fea565)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:08:24 -05:00
Greg Kurz c8c9aab173 9pfs: local: mkdir: don't follow symlinks
The local_mkdir() callback is vulnerable to symlink attacks because it
calls:

(1) mkdir() which follows symbolic links for all path elements but the
    rightmost one
(2) local_set_xattr()->setxattr() which follows symbolic links for all
    path elements
(3) local_set_mapped_file_attr() which calls in turn local_fopen() and
    mkdir(), both functions following symbolic links for all path
    elements but the rightmost one
(4) local_post_create_passthrough() which calls in turn lchown() and
    chmod(), both functions also following symbolic links

This patch converts local_mkdir() to rely on opendir_nofollow() and
mkdirat() to fix (1), as well as local_set_xattrat(),
local_set_mapped_file_attrat() and local_set_cred_passthrough() to
fix (2), (3) and (4) respectively.

The mapped and mapped-file security modes are supposed to be identical,
except for the place where credentials and file modes are stored. While
here, we also make that explicit by sharing the call to mkdirat().

This partly fixes CVE-2016-9602.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 3f3a16990b)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:08:21 -05:00
Greg Kurz 5b24a96cd2 9pfs: local: mknod: don't follow symlinks
The local_mknod() callback is vulnerable to symlink attacks because it
calls:

(1) mknod() which follows symbolic links for all path elements but the
    rightmost one
(2) local_set_xattr()->setxattr() which follows symbolic links for all
    path elements
(3) local_set_mapped_file_attr() which calls in turn local_fopen() and
    mkdir(), both functions following symbolic links for all path
    elements but the rightmost one
(4) local_post_create_passthrough() which calls in turn lchown() and
    chmod(), both functions also following symbolic links

This patch converts local_mknod() to rely on opendir_nofollow() and
mknodat() to fix (1), as well as local_set_xattrat() and
local_set_mapped_file_attrat() to fix (2) and (3) respectively.

A new local_set_cred_passthrough() helper based on fchownat() and
fchmodat_nofollow() is introduced as a replacement to
local_post_create_passthrough() to fix (4).

The mapped and mapped-file security modes are supposed to be identical,
except for the place where credentials and file modes are stored. While
here, we also make that explicit by sharing the call to mknodat().

This partly fixes CVE-2016-9602.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit d815e72190)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:08:18 -05:00
Greg Kurz 9f4ba82b06 9pfs: local: symlink: don't follow symlinks
The local_symlink() callback is vulnerable to symlink attacks because it
calls:

(1) symlink() which follows symbolic links for all path elements but the
    rightmost one
(2) open(O_NOFOLLOW) which follows symbolic links for all path elements but
    the rightmost one
(3) local_set_xattr()->setxattr() which follows symbolic links for all
    path elements
(4) local_set_mapped_file_attr() which calls in turn local_fopen() and
    mkdir(), both functions following symbolic links for all path
    elements but the rightmost one

This patch converts local_symlink() to rely on opendir_nofollow() and
symlinkat() to fix (1), openat(O_NOFOLLOW) to fix (2), as well as
local_set_xattrat() and local_set_mapped_file_attrat() to fix (3) and
(4) respectively.

This partly fixes CVE-2016-9602.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 38771613ea)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:08:15 -05:00
Greg Kurz 62d1dbbfce 9pfs: local: chown: don't follow symlinks
The local_chown() callback is vulnerable to symlink attacks because it
calls:

(1) lchown() which follows symbolic links for all path elements but the
    rightmost one
(2) local_set_xattr()->setxattr() which follows symbolic links for all
    path elements
(3) local_set_mapped_file_attr() which calls in turn local_fopen() and
    mkdir(), both functions following symbolic links for all path
    elements but the rightmost one

This patch converts local_chown() to rely on open_nofollow() and
fchownat() to fix (1), as well as local_set_xattrat() and
local_set_mapped_file_attrat() to fix (2) and (3) respectively.

This partly fixes CVE-2016-9602.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit d369f20763)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:08:11 -05:00
Greg Kurz ea9e59bdf6 9pfs: local: chmod: don't follow symlinks
The local_chmod() callback is vulnerable to symlink attacks because it
calls:

(1) chmod() which follows symbolic links for all path elements
(2) local_set_xattr()->setxattr() which follows symbolic links for all
    path elements
(3) local_set_mapped_file_attr() which calls in turn local_fopen() and
    mkdir(), both functions following symbolic links for all path
    elements but the rightmost one

We would need fchmodat() to implement AT_SYMLINK_NOFOLLOW to fix (1). This
isn't the case on linux unfortunately: the kernel doesn't even have a flags
argument to the syscall :-\ It is impossible to fix it in userspace in
a race-free manner. This patch hence converts local_chmod() to rely on
open_nofollow() and fchmod(). This fixes the vulnerability but introduces
a limitation: the target file must readable and/or writable for the call
to openat() to succeed.

It introduces a local_set_xattrat() replacement to local_set_xattr()
based on fsetxattrat() to fix (2), and a local_set_mapped_file_attrat()
replacement to local_set_mapped_file_attr() based on local_fopenat()
and mkdirat() to fix (3). No effort is made to factor out code because
both local_set_xattr() and local_set_mapped_file_attr() will be dropped
when all users have been converted to use the "at" versions.

This partly fixes CVE-2016-9602.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit e3187a45dd)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:08:06 -05:00
Greg Kurz e314b1b1fb 9pfs: local: link: don't follow symlinks
The local_link() callback is vulnerable to symlink attacks because it calls:

(1) link() which follows symbolic links for all path elements but the
    rightmost one
(2) local_create_mapped_attr_dir()->mkdir() which follows symbolic links
    for all path elements but the rightmost one

This patch converts local_link() to rely on opendir_nofollow() and linkat()
to fix (1), mkdirat() to fix (2).

This partly fixes CVE-2016-9602.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit ad0b46e6ac)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:08:02 -05:00
Greg Kurz d7322e13c6 9pfs: local: improve error handling in link op
When using the mapped-file security model, we also have to create a link
for the metadata file if it exists. In case of failure, we should rollback.

That's what this patch does.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 6dd4b1f1d0)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:07:59 -05:00
Greg Kurz d93d06a2fc 9pfs: local: rename: use renameat
The local_rename() callback is vulnerable to symlink attacks because it
uses rename() which follows symbolic links in all path elements but the
rightmost one.

This patch simply transforms local_rename() into a wrapper around
local_renameat() which is symlink-attack safe.

This partly fixes CVE-2016-9602.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit d2767edec5)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:07:56 -05:00
Greg Kurz 0f3490faa8 9pfs: local: renameat: don't follow symlinks
The local_renameat() callback is currently a wrapper around local_rename()
which is vulnerable to symlink attacks.

This patch rewrites local_renameat() to have its own implementation, based
on local_opendir_nofollow() and renameat().

This partly fixes CVE-2016-9602.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 99f2cf4b2d)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:07:51 -05:00
Greg Kurz cfe40e1485 9pfs: local: lstat: don't follow symlinks
The local_lstat() callback is vulnerable to symlink attacks because it
calls:

(1) lstat() which follows symbolic links in all path elements but the
    rightmost one
(2) getxattr() which follows symbolic links in all path elements
(3) local_mapped_file_attr()->local_fopen()->openat(O_NOFOLLOW) which
    follows symbolic links in all path elements but the rightmost
    one

This patch converts local_lstat() to rely on opendir_nofollow() and
fstatat(AT_SYMLINK_NOFOLLOW) to fix (1), fgetxattrat_nofollow() to
fix (2).

A new local_fopenat() helper is introduced as a replacement to
local_fopen() to fix (3). No effort is made to factor out code
because local_fopen() will be dropped when all users have been
converted to call local_fopenat().

This partly fixes CVE-2016-9602.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit f9aef99b3e)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:07:48 -05:00
Greg Kurz 3439290f9e 9pfs: local: readlink: don't follow symlinks
The local_readlink() callback is vulnerable to symlink attacks because it
calls:

(1) open(O_NOFOLLOW) which follows symbolic links for all path elements but
    the rightmost one
(2) readlink() which follows symbolic links for all path elements but the
    rightmost one

This patch converts local_readlink() to rely on open_nofollow() to fix (1)
and opendir_nofollow(), readlinkat() to fix (2).

This partly fixes CVE-2016-9602.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit bec1e9546e)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:07:44 -05:00
Greg Kurz ec10eada04 9pfs: local: truncate: don't follow symlinks
The local_truncate() callback is vulnerable to symlink attacks because
it calls truncate() which follows symbolic links in all path elements.

This patch converts local_truncate() to rely on open_nofollow() and
ftruncate() instead.

This partly fixes CVE-2016-9602.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit ac125d993b)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:07:41 -05:00
Greg Kurz d3c54bf9e7 9pfs: local: statfs: don't follow symlinks
The local_statfs() callback is vulnerable to symlink attacks because it
calls statfs() which follows symbolic links in all path elements.

This patch converts local_statfs() to rely on open_nofollow() and fstatfs()
instead.

This partly fixes CVE-2016-9602.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 31e51d1c15)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:07:37 -05:00
Greg Kurz 91225c670a 9pfs: local: utimensat: don't follow symlinks
The local_utimensat() callback is vulnerable to symlink attacks because it
calls qemu_utimens()->utimensat(AT_SYMLINK_NOFOLLOW) which follows symbolic
links in all path elements but the rightmost one or qemu_utimens()->utimes()
which follows symbolic links for all path elements.

This patch converts local_utimensat() to rely on opendir_nofollow() and
utimensat(AT_SYMLINK_NOFOLLOW) directly instead of using qemu_utimens().
It is hence assumed that the OS supports utimensat(), i.e. has glibc 2.6
or higher and linux 2.6.22 or higher, which seems reasonable nowadays.

This partly fixes CVE-2016-9602.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit a33eda0dd9)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:07:34 -05:00
Greg Kurz 4286f58bfc 9pfs: local: remove: don't follow symlinks
The local_remove() callback is vulnerable to symlink attacks because it
calls:

(1) lstat() which follows symbolic links in all path elements but the
    rightmost one
(2) remove() which follows symbolic links in all path elements but the
    rightmost one

This patch converts local_remove() to rely on opendir_nofollow(),
fstatat(AT_SYMLINK_NOFOLLOW) to fix (1) and unlinkat() to fix (2).

This partly fixes CVE-2016-9602.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit a0e640a872)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:07:31 -05:00
Greg Kurz 0bb99557e1 9pfs: local: unlinkat: don't follow symlinks
The local_unlinkat() callback is vulnerable to symlink attacks because it
calls remove() which follows symbolic links in all path elements but the
rightmost one.

This patch converts local_unlinkat() to rely on opendir_nofollow() and
unlinkat() instead.

Most of the code is moved to a separate local_unlinkat_common() helper
which will be reused in a subsequent patch to fix the same issue in
local_remove().

This partly fixes CVE-2016-9602.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit df4938a665)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:07:27 -05:00
Greg Kurz a9f46b8b65 9pfs: local: lremovexattr: don't follow symlinks
The local_lremovexattr() callback is vulnerable to symlink attacks because
it calls lremovexattr() which follows symbolic links in all path elements
but the rightmost one.

This patch introduces a helper to emulate the non-existing fremovexattrat()
function: it is implemented with /proc/self/fd which provides a trusted
path that can be safely passed to lremovexattr().

local_lremovexattr() is converted to use this helper and opendir_nofollow().

This partly fixes CVE-2016-9602.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 72f0d0bf51)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:07:25 -05:00
Greg Kurz ed6083afc2 9pfs: local: lsetxattr: don't follow symlinks
The local_lsetxattr() callback is vulnerable to symlink attacks because
it calls lsetxattr() which follows symbolic links in all path elements but
the rightmost one.

This patch introduces a helper to emulate the non-existing fsetxattrat()
function: it is implemented with /proc/self/fd which provides a trusted
path that can be safely passed to lsetxattr().

local_lsetxattr() is converted to use this helper and opendir_nofollow().

This partly fixes CVE-2016-9602.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 3e36aba757)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:07:22 -05:00
Greg Kurz d10142c11b 9pfs: local: llistxattr: don't follow symlinks
The local_llistxattr() callback is vulnerable to symlink attacks because
it calls llistxattr() which follows symbolic links in all path elements but
the rightmost one.

This patch introduces a helper to emulate the non-existing flistxattrat()
function: it is implemented with /proc/self/fd which provides a trusted
path that can be safely passed to llistxattr().

local_llistxattr() is converted to use this helper and opendir_nofollow().

This partly fixes CVE-2016-9602.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 5507904e36)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:07:19 -05:00
Greg Kurz 6c1e3a16bc 9pfs: local: lgetxattr: don't follow symlinks
The local_lgetxattr() callback is vulnerable to symlink attacks because
it calls lgetxattr() which follows symbolic links in all path elements but
the rightmost one.

This patch introduces a helper to emulate the non-existing fgetxattrat()
function: it is implemented with /proc/self/fd which provides a trusted
path that can be safely passed to lgetxattr().

local_lgetxattr() is converted to use this helper and opendir_nofollow().

This partly fixes CVE-2016-9602.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 56ad3e54da)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:07:16 -05:00
Greg Kurz acf22d2264 9pfs: local: open/opendir: don't follow symlinks
The local_open() and local_opendir() callbacks are vulnerable to symlink
attacks because they call:

(1) open(O_NOFOLLOW) which follows symbolic links in all path elements but
    the rightmost one
(2) opendir() which follows symbolic links in all path elements

This patch converts both callbacks to use new helpers based on
openat_nofollow() to only open files and directories if they are
below the virtfs shared folder

This partly fixes CVE-2016-9602.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 996a0d76d7)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:07:10 -05:00
Greg Kurz 54f951d634 9pfs: local: keep a file descriptor on the shared folder
This patch opens the shared folder and caches the file descriptor, so that
it can be used to do symlink-safe path walk.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 0e35a37829)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:07:03 -05:00
Greg Kurz 984bd0a1b8 9pfs: introduce relative_openat_nofollow() helper
When using the passthrough security mode, symbolic links created by the
guest are actual symbolic links on the host file system.

Since the resolution of symbolic links during path walk is supposed to
occur on the client side. The server should hence never receive any path
pointing to an actual symbolic link. This isn't guaranteed by the protocol
though, and malicious code in the guest can trick the server to issue
various syscalls on paths whose one or more elements are symbolic links.
In the case of the "local" backend using the "passthrough" or "none"
security modes, the guest can directly create symbolic links to arbitrary
locations on the host (as per spec). The "mapped-xattr" and "mapped-file"
security modes are also affected to a lesser extent as they require some
help from an external entity to create actual symbolic links on the host,
i.e. another guest using "passthrough" mode for example.

The current code hence relies on O_NOFOLLOW and "l*()" variants of system
calls. Unfortunately, this only applies to the rightmost path component.
A guest could maliciously replace any component in a trusted path with a
symbolic link. This could allow any guest to escape a virtfs shared folder.

This patch introduces a variant of the openat() syscall that successively
opens each path element with O_NOFOLLOW. When passing a file descriptor
pointing to a trusted directory, one is guaranteed to be returned a
file descriptor pointing to a path which is beneath the trusted directory.
This will be used by subsequent patches to implement symlink-safe path walk
for any access to the backend.

Symbolic links aren't the only threats actually: a malicious guest could
change a path element to point to other types of file with undesirable
effects:
- a named pipe or any other thing that would cause openat() to block
- a terminal device which would become QEMU's controlling terminal

These issues can be addressed with O_NONBLOCK and O_NOCTTY.

Two helpers are introduced: one to open intermediate path elements and one
to open the rightmost path element.

Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(renamed openat_nofollow() to relative_openat_nofollow(),
 assert path is relative and doesn't contain '//',
 fixed side-effect in assert, Greg Kurz)
Signed-off-by: Greg Kurz <groug@kaod.org>

(cherry picked from commit 6482a96163)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:06:56 -05:00
Greg Kurz 52d43ff72e 9pfs: remove side-effects in local_open() and local_opendir()
If these functions fail, they should not change *fs. Let's use local
variables to fix this.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 21328e1e57)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:06:52 -05:00
Greg Kurz e103f9e7b4 9pfs: remove side-effects in local_init()
If this function fails, it should not modify *ctx.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 00c90bd1c2)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:06:49 -05:00
Greg Kurz 2c4f0f6c11 9pfs: local: move xattr security ops to 9p-xattr.c
These functions are always called indirectly. It really doesn't make sense
for them to sit in a header file.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 56fc494bdc)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-16 12:06:43 -05:00
Stefan Hajnoczi 0737f32daf Update version for v2.8.0 release
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-12-20 16:16:42 +00:00
Stefan Hajnoczi 6a928d25b6 Update version for v2.8.0-rc4 release
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-12-15 07:36:03 +00:00
Maxime Coquelin 66d1c4c19f virtio-pci: Fix cross-version migration with older machines
This patch fixes a cross-version migration regression introduced
by commit d1b4259f ("virtio-bus: Plug devices after features are
negotiated").

The problem is encountered when host's vhost backend does not support
VIRTIO_F_VERSION_1, and migration is initiated from a v2.7 or prior
machine with virtio-pci modern capabilities enabled to a v2.8 machine.

In this case, modern capabilities get exposed to the guest by the source,
whereas the target will detect version 1 is not supported so will only
expose legacy capabilities.

The problem is fixed by introducing a new "x-ignore-backend-features"
property, which is set in v2.7 and prior compatibility modes. Doing this,
v2.7 machine keeps its broken behaviour (enabling modern while version
is not supported), and newer machines will behave correctly.

Reported-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Message-id: 20161214163035.3297-1-maxime.coquelin@redhat.com
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-12-15 07:35:19 +00:00
Stefan Hajnoczi d70678a538 po: add missing translations in de, fr, it, zh
There are missing translations for the new "Copy" menu item.

The following people provided them to me on IRC just in time for the
QEMU 2.8 release:

 * de_DE - Stefan Hajnoczi <stefanha@redhat.com>
 * fr_FR - Laurent Vivier <laurent@vivier.eu>
 * it    - Pino Toscano <ptoscano@redhat.com>
 * zh_CN - Fam Zheng <famz@redhat.com>

[Removed spurious space in zh_CN "Copy" translation that Fam Zheng
pointed out.
--Stefan]

Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20161214144713.11009-1-stefanha@redhat.com
Cc: Fam Zheng <famz@redhat.com>
Cc: Pino Toscano <ptoscano@redhat.com>
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-12-14 18:47:19 +00:00
Stefan Hajnoczi a08156321a ui/gtk: fix "Copy" menu item segfault
The "Copy" menu item copies VTE terminal text to the clipboard.  This
only works with VTE terminals, not with graphics consoles.

Disable the menu item when the current notebook page isn't a VTE
terminal.

This patch fixes a segfault.  Reproducer: Start QEMU and click the Copy
menu item when the guest display is visible.

Reported-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20161214142518.10504-1-stefanha@redhat.com
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-12-14 18:46:21 +00:00
Stefan Hajnoczi 3753c75db8 Update language files for QEMU 2.8.0
Update translation files (change created via 'make -C po update').

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 20161213214917.6436-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-12-14 12:32:06 +00:00
Stefan Hajnoczi a92f7fe5a8 Update version for v2.8.0-rc3 release
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-12-06 23:26:04 +00:00
Eric Blake 4230e5d128 qapi: Document introduction of gluster's 'debug' option
We intentionally renamed 'debug-level' to 'debug' in the QMP
schema for 'blockdev-add' related to gluster, in order to
match the command line (commit 1a417e46).  However, since
'debug-level' was visible in 2.7, that means that we should
document that 'debug' was not available until 2.8.

The change was intentional because 'blockdev-add' itself
underwent incompatible changes (such as commit 0153d2f) for
the same release; our intent is that after 2.8, these
interfaces will now be stable.  [In hindsight, we should have
used the name x-blockdev-add when we first introduced it]

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20161206182020.25736-1-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-12-06 20:22:03 +00:00
Peter Maydell a9353fe897 exec.c: Fix breakpoint invalidation race
A bug (1647683) was reported showing a crash when removing
breakpoints.  The reproducer was bisected to 3359baad when tb_flush
was finally made thread safe.  While in MTTCG the locking in
breakpoint_invalidate would have prevented any problems, but
currently tb_lock() is a NOP for system emulation.

The race is between a tb_flush from the gdbstub and the
tb_invalidate_phys_addr() in breakpoint_invalidate().

Ideally we'd have actual locking here; for the moment the
simple fix is to do a full tb_flush() for a bp invalidate,
since that is thread-safe even if no lock is taken.

Reported-by: Julian Brown <julian@codesourcery.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1481047629-7763-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-12-06 20:21:46 +00:00
Eric Blake d750c3a966 qapi: Document DEVICE_TRAY_MOVED addition
Commit 2d76e72 failed to add a versioning tag to 'id'.

I audited all qapi*.json files from v2.7.0 to the current
state of the tree, and didn't find any other additions where
we failed to use a version tag.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20161206160345.22425-1-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-12-06 20:18:38 +00:00
Changlong Xie b5b7b5deb4 tests/.gitignore: Ignore test-char
[Lin Ma <lma@suse.com> notes that commit ea3af47d added test for chardev
unit tests, but didn't add the name of generated binary in .gitignore.
--Stefan]

Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1478494765-13233-1-git-send-email-xiecl.fnst@cn.fujitsu.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-12-06 20:05:49 +00:00
Stefan Hajnoczi 68701de136 Merge remote-tracking branch 'kwolf/tags/for-upstream' into staging
Block layer patches for 2.8.0-rc3

# gpg: Signature made Tue 06 Dec 2016 02:44:39 PM GMT
# gpg:                using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* kwolf/tags/for-upstream:
  qcow2: Don't strand clusters near 2G intervals during commit

Message-id: 1481037418-10239-1-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-12-06 17:35:29 +00:00
Eric Blake a3e1505dae qcow2: Don't strand clusters near 2G intervals during commit
The qcow2_make_empty() function is reached during 'qemu-img commit',
in order to clear out ALL clusters of an image.  However, if the
image cannot use the fast code path (true if the image is format
0.10, or if the image contains a snapshot), the cluster size is
larger than 512, and the image is larger than 2G in size, then our
choice of sector_step causes problems.  Since it is not cluster
aligned, but qcow2_discard_clusters() silently ignores an unaligned
head or tail, we are leaving clusters allocated.

Enhance the testsuite to expose the flaw, and patch the problem by
ensuring our step size is aligned.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-12-06 15:37:02 +01:00
Stefan Hajnoczi ce1f3e88f8 Merge remote-tracking branch 'jasowang/tags/net-pull-request' into staging
# gpg: Signature made Tue 06 Dec 2016 02:24:23 AM GMT
# gpg:                using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* jasowang/tags/net-pull-request:
  fsl_etsec: Fix various small problems in hexdump code
  fsl_etsec: Pad short payloads with zeros
  net: mcf: check receive buffer size register value

Message-id: 1480991552-14360-1-git-send-email-jasowang@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-12-06 10:24:24 +00:00
Stefan Hajnoczi 8a04c80f9f Merge remote-tracking branch 'jtc/tags/block-pull-request' into staging
# gpg: Signature made Mon 05 Dec 2016 09:30:45 PM GMT
# gpg:                using RSA key 0xBDBE7B27C0DE3057
# gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>"
# gpg:                 aka "Jeffrey Cody <jeff@codyprime.org>"
# gpg:                 aka "Jeffrey Cody <codyprime@gmail.com>"
# Primary key fingerprint: 9957 4B4D 3474 90E7 9D98  D624 BDBE 7B27 C0DE 3057

* jtc/tags/block-pull-request:
  qemu-doc: update gluster protocol usage guide
  block/nfs: fix QMP to match debug option
  block/gluster: fix QMP to match debug option

Message-id: 1480973521-28945-1-git-send-email-jcody@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-12-06 09:55:57 +00:00
Stefan Hajnoczi 5d3074f0db Merge remote-tracking branch 'pm215/tags/pull-target-arm-20161205' into staging
target-arm queue:
 * fix gen_load_exclusive handling of ldaxp

# gpg: Signature made Mon 05 Dec 2016 05:57:51 PM GMT
# gpg:                using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* pm215/tags/pull-target-arm-20161205:
  target-arm/translate-a64: fix gen_load_exclusive

Message-id: 1480960775-5002-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-12-06 09:51:41 +00:00
Stefan Hajnoczi 8a844b2603 Merge remote-tracking branch 'armbru/tags/pull-qapi-2016-12-05' into staging
QAPI patches for 2016-12-05

# gpg: Signature made Mon 05 Dec 2016 04:41:53 PM GMT
# gpg:                using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* armbru/tags/pull-qapi-2016-12-05:
  qapi: add missing colon-ending for section name
  qapi: use one symbol per line
  qapi: fix various symbols mismatch in documentation
  qapi: fix missing symbol @prefix
  qapi: fix schema symbol sections
  qga/schema: fix double-return in doc
  tests: Avoid qobject_from_jsonf("%"PRId64)
  test-qga: Avoid qobject_from_jsonv("%"PRId64)
  qmp-event: Avoid qobject_from_jsonf("%"PRId64)

Message-id: 1480956313-31322-1-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-12-06 09:49:51 +00:00
Stefan Hajnoczi e24f095e44 Merge remote-tracking branch 'kraxel/tags/pull-vga-20161205-1' into staging
qxl: fix flickering.
cirrus: avoid devision by zero.
virtio-gpu: fix two leaks.

# gpg: Signature made Mon 05 Dec 2016 10:55:45 AM GMT
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* kraxel/tags/pull-vga-20161205-1:
  display: cirrus: check vga bits per pixel(bpp) value
  virtio-gpu: fix memory leak in update_cursor_data_virgl
  virtio-gpu: fix information leak in getting capset info dispatch
  qxl: Only emit QXL_INTERRUPT_CLIENT_MONITORS_CONFIG on config changes

Message-id: 1480935840-3961-1-git-send-email-kraxel@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-12-06 09:38:39 +00:00
Andrey Smirnov 9f5832d34b fsl_etsec: Fix various small problems in hexdump code
Fix various small problems in hexdump code, such as:
    - Reference to non-existing field etsec->nic->nc.name is replaced
    with nc->name

    - Type mismatch warnings

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-12-06 10:23:50 +08:00
Prasanna Kumar Kalever 76b5550f70 qemu-doc: update gluster protocol usage guide
Document:
1. The new debug and logfile options with their usages
2. New json format and its usage and
3. update "GlusterFS, Device URL Syntax" section in "Invocation"

Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-12-05 16:30:29 -05:00
Prasanna Kumar Kalever 7103d9165b block/nfs: fix QMP to match debug option
The QMP definition of BlockdevOptionsNfs:
{ 'struct': 'BlockdevOptionsNfs',
  'data': { 'server': 'NFSServer',
            'path': 'str',
            '*user': 'int',
            '*group': 'int',
            '*tcp-syn-count': 'int',
            '*readahead-size': 'int',
            '*page-cache-size': 'int',
            '*debug-level': 'int' } }

To make this consistent with other block protocols like gluster, lets
change s/debug-level/debug/

Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-12-05 16:30:21 -05:00
Prasanna Kumar Kalever 1a417e46ae block/gluster: fix QMP to match debug option
The QMP definition of BlockdevOptionsGluster:
{ 'struct': 'BlockdevOptionsGluster',
  'data': { 'volume': 'str',
            'path': 'str',
            'server': ['GlusterServer'],
            '*debug-level': 'int',
            '*logfile': 'str' } }

But instead of 'debug-level we have exported 'debug' as the option for choosing
debug level of gluster protocol driver.

This patch fix QMP definition BlockdevOptionsGluster
s/debug-level/debug/

Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-12-05 16:30:15 -05:00
Alex Bennée 5460da501a target-arm/translate-a64: fix gen_load_exclusive
While testing rth's latest TCG patches with risu I found ldaxp was
broken. Investigating further I found it was broken by 1dd089d0 when
the cmpxchg atomic work was merged. As part of that change the code
attempted to be clever by doing a single 64 bit load and then shuffle
the data around to set the two 32 bit registers.

As I couldn't quite follow the endian magic I've simply partially
reverted the change to the original code gen_load_exclusive code. This
doesn't affect the cmpxchg functionality as that is all done on in
gen_store_exclusive part which is untouched.

I've also restored the comment that was removed (with a slight tweak
to mention cmpxchg).

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <rth@twiddle.net>
Message-id: 20161202173454.19179-1-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-05 17:52:01 +00:00
Marc-André Lureau 5072f7b38b qapi: add missing colon-ending for section name
The documentation parser we are going to add expects a section name to
end with ':', otherwise the comment is treated as free-form text body.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161117155504.21843-9-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-12-05 17:41:38 +01:00
Marc-André Lureau 9f2a70e465 qapi: use one symbol per line
The documentation parser we are going to add only handles a single
symbol per line.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161117155504.21843-8-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-12-05 17:41:38 +01:00
Marc-André Lureau 4d5c8bc42f qapi: fix various symbols mismatch in documentation
There are various mismatch:
- invalid symbols
- section and member symbols mismatch
- enum or union values vs 'type'

The documentation parser catches all these cases.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161117155504.21843-7-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-12-05 17:41:37 +01:00
Marc-André Lureau c5927e7abf qapi: fix missing symbol @prefix
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20161117155504.21843-6-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-12-05 17:41:37 +01:00
Marc-André Lureau 49687ace02 qapi: fix schema symbol sections
According to docs/qapi-code-gen.txt, there needs to be '##' to start a
and end a symbol section, that's also what the documentation parser
expects.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20161117155504.21843-5-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-12-05 17:41:37 +01:00
Marc-André Lureau 95cd8fd909 qga/schema: fix double-return in doc
guest-get-memory-block-info documentation should have only one
"Returns:".

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20161117155504.21843-3-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-12-05 17:41:37 +01:00
Eric Blake 29a6731afb tests: Avoid qobject_from_jsonf("%"PRId64)
The qobject_from_jsonf() function implements a pseudo-printf
language for creating a QObject; however, it is hard-coded to
only parse a subset of formats understood by -Wformat, and is
not a straight synonym to bare printf().  In particular, any
use of an int64_t integer works only if the system's
definition of PRId64 matches what the parser expects; which
works on glibc (%lld or %ld depending on 32- vs. 64-bit) and
mingw (%I64d), but not on Mac OS (%qd).  Rather than enhance
the parser, it is just as easy to force the use of int (where
the value is small enough) or long long instead of int64_t,
which we know always works.

This should cover all remaining testsuite uses of
qobject_from_json[fv]() that were trying to rely on PRId64,
although my proof for that was done by adding in asserts and
checking that 'make check' still passed, where such asserts
are inappropriate during hard freeze.  A later series in 2.9
may remove all dynamic JSON parsing, but that's a bigger task.

Reported by: G 3 <programmingkidx@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1479922617-4400-4-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rename value64 to value_ll]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-12-05 17:09:34 +01:00
Eric Blake 1792d7d0a2 test-qga: Avoid qobject_from_jsonv("%"PRId64)
The qobject_from_jsonv() function implements a pseudo-printf
language for creating a QObject; however, it is hard-coded to
only parse a subset of formats understood by -Wformat, and is
not a straight synonym to bare printf().  In particular, any
use of an int64_t integer works only if the system's
definition of PRId64 matches what the parser expects; which
works on glibc (%lld or %ld depending on 32- vs. 64-bit) and
mingw (%I64d), but not on Mac OS (%qd).  Rather than enhance
the parser, it is just as easy to use normal printf() for
this particular conversion, matching what is done elsewhere
in this file [1], which is safe in this instance because the
format does not contain any of the problematic differences
(bare '%' or the '%s' format).

The use of PRId64 for a variable named 'pid' is gross, but it
is a sad reality of the 64-bit mingw environment, which
mistakenly defines pid_t as a 64-bit type even though getpid()
returns 'int' on that platform [2].  Our definition of the
QGA GuestExec type defines 'pid' as a 64-bit entity, and we
can't tighten it to 'int32' unless the mingw header is fixed.
Using 'long long' instead of 'int64_t' just so that we can
stick with qobject_from_jsonv("%lld") instead of printf() is
not any prettier, since we may have later type churn anyways.

[1] see 'git grep -A2 strdup_printf tests/test-qga.c'
[2] https://bugzilla.redhat.com/show_bug.cgi?id=1397787

Reported by: G 3 <programmingkidx@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1479922617-4400-3-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-12-05 17:09:34 +01:00
Eric Blake 043b5a4951 qmp-event: Avoid qobject_from_jsonf("%"PRId64)
The qobject_from_jsonf() function implements a pseudo-printf
language for creating a QObject; however, it is hard-coded to
only parse a subset of formats understood by -Wformat, and is
not a straight synonym to bare printf().  In particular, any
use of an int64_t integer works only if the system's
definition of PRId64 matches what the parser expects; which
works on glibc (%lld or %ld depending on 32- vs. 64-bit) and
mingw (%I64d), but not on Mac OS (%qd).  Rather than enhance
the parser, it is just as easy to use 'long long', which we
know always works.  There are few enough callers of
qobject_from_json[fv]() that it is easy to audit that this is
the only non-testsuite caller that was actually relying on
this particular conversion.

Reported by: G 3 <programmingkidx@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1479922617-4400-2-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Cast tv.tv_sec, tv.tv_usec to long long for type correctness]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-12-05 17:09:34 +01:00
Stefan Hajnoczi bc66cedb41 Merge remote-tracking branch 'yongbok/tags/mips-20161204' into staging
MIPS patches 2016-12-04

Changes:
* Fix Loongson instructions
* Fix bad shifts in {dextp|dextpdp}

# gpg: Signature made Sun 04 Dec 2016 01:39:38 AM GMT
# gpg:                using RSA key 0x2238EB86D5F797C2
# gpg: Can't check signature: public key not found

* yongbok/tags/mips-20161204:
  target-mips: fix bad shifts in {dextp|dextpdp}
  target-mips: Fix Loongson multimedia instructions.
  target-mips: Fix Loongson multimedia 'or' instruction.
  target-mips: Fix Loongson pandn instruction.

Message-id: 1480816817-53245-1-git-send-email-yongbok.kim@imgtec.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-12-05 10:56:45 +00:00
Prasad J Pandit 4299b90e9b display: cirrus: check vga bits per pixel(bpp) value
In Cirrus CLGD 54xx VGA Emulator, if cirrus graphics mode is VGA,
'cirrus_get_bpp' returns zero(0), which could lead to a divide
by zero error in while copying pixel data. The same could occur
via blit pitch values. Add check to avoid it.

Reported-by: Huawei PSIRT <psirt@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 1476776717-24807-1-git-send-email-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-12-05 11:01:55 +01:00
Andrey Smirnov 64f441d2e5 fsl_etsec: Pad short payloads with zeros
Depending on QEMU network setup it is possible for us to receive a
complete Ethernet packet that is less 64 bytes long. One such example is
when QEMU is configured to use a standalone TAP device (not set to be a
part of any bridge) receives and ARP packet. In cases like that we need
to add more than just 4-bytes of CRC padding and ensure that our payload
is at least 60 bytes long, such that, when combined with CRC padding
bytes the resulting size is at least 802.3 minimum MTU bytes
long (64). Failing to do that results in code in etsec_walk_rx_ring()
setting BD_RX_SH which, in turn, makes corresponding Linux driver of
emulated host to reject buffer as a runt packet

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-12-05 17:45:14 +08:00
Prasad J Pandit 77d54985b8 net: mcf: check receive buffer size register value
ColdFire Fast Ethernet Controller uses a receive buffer size
register(EMRBR) to hold maximum size of all receive buffers.
It is set by a user before any operation. If it was set to be
zero, ColdFire emulator would go into an infinite loop while
receiving data in mcf_fec_receive. Add check to avoid it.

Reported-by: Wjjzhang <wjjzhang@tencent.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-12-05 17:45:14 +08:00
Li Qiang 2d1cd6c7a9 virtio-gpu: fix memory leak in update_cursor_data_virgl
In update_cursor_data_virgl function, if the 'width'/ 'height'
is not equal to current cursor's width/height it will return
without free the 'data' allocated previously. This will lead
a memory leak issue. This patch fix this issue.

Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Message-id: 58187760.41d71c0a.cca75.4cb9@mx.google.com
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-12-05 09:37:52 +01:00
Li Qiang 42a8dadc74 virtio-gpu: fix information leak in getting capset info dispatch
In virgl_cmd_get_capset_info dispatch function, the 'resp' hasn't
been full initialized before writing to the guest. This will leak
the 'resp.padding' and 'resp.hdr.padding' fieds to the guest. This
patch fix this issue.

Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Message-id: 5818661e.0860240a.77264.7a56@mx.google.com
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-12-05 09:37:52 +01:00
Christophe Fergeau 6c7565028c qxl: Only emit QXL_INTERRUPT_CLIENT_MONITORS_CONFIG on config changes
Currently if the client keeps sending the same monitor config to
QEMU/spice-server, QEMU will always raise
a QXL_INTERRUPT_CLIENT_MONITORS_CONFIG regardless of whether there was a
change or not.
Guest-side (with fedora 25), the kernel QXL KMS driver will also forward the
event to user-space without checking if there were actual changes.
Next in line are gnome-shell/mutter (on a default f25 install), which
will try to reconfigure everything without checking if there is anything
to do.
Where this gets ugly is that when applying the resolution changes,
gnome-shell/mutter will call drmModeRmFB, drmModeAddFB, and
drmModeSetCrtc, which will cause the primary surface to be destroyed and
recreated by the QXL KMS driver. This in turn will cause the client to
resend a client monitors config message, which will cause QEMU to reemit
an interrupt with an unchanged monitors configuration, ...
This causes https://bugzilla.redhat.com/show_bug.cgi?id=1266484

This commit makes sure that we only emit
QXL_INTERRUPT_CLIENT_MONITORS_CONFIG when there are actual configuration
changes the guest should act on.

Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Message-id: 20161028144840.18326-1-cfergeau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-12-05 09:37:52 +01:00
Yongbok Kim e6e2784cac target-mips: fix bad shifts in {dextp|dextpdp}
Fixed issues in the MIPSDSP64 instructions dextp and dextpdp.
Shifting can go out of 32 bit range.

https://bugs.launchpad.net/qemu/+bug/1631625

Reported-by: Thomas Huth <thuth@redhat.com>
Reported-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-12-04 00:57:06 +00:00
Heiher b5a587b613 target-mips: Fix Loongson multimedia instructions.
Needed to emit FPU exception on Loongson multimedia instructions
executing if Status:CU1 is clear. or FPR changes may be missed
on Linux.

Signed-off-by: Heiher <wangr@lemote.com>
Signed-off-by: Fuxin Zhang <zhangfx@lemote.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2016-12-04 00:56:29 +00:00
Heiher bb7cab5f34 target-mips: Fix Loongson multimedia 'or' instruction.
Signed-off-by: Heiher <wangr@lemote.com>
Signed-off-by: Fuxin Zhang <zhangfx@lemote.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2016-12-02 16:11:09 +00:00
Heiher 9099a36b4b target-mips: Fix Loongson pandn instruction.
pandn FD, FS, FT
Operation: FD = ((NOT FS) AND FT)

Signed-off-by: Heiher <wangr@lemote.com>
Signed-off-by: Fuxin Zhang <zhangfx@lemote.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2016-12-02 16:11:08 +00:00
Stefan Hajnoczi bd8ef5060d Merge remote-tracking branch 'dgibson/tags/ppc-for-2.8-20161201' into staging
ppc patch queue 2016-12-01

Just a single migration / hotplug fix in this set.  I believe it's
important enough to go in this late in the 2.8 release process.

# gpg: Signature made Thu 01 Dec 2016 04:43:49 AM GMT
# gpg:                using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* dgibson/tags/ppc-for-2.8-20161201:
  spapr: fix default DRC state for coldplugged LMBs

Message-id: 20161201044441.14365-1-david@gibson.dropbear.id.au
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-12-01 13:39:29 +00:00
Stefan Hajnoczi 2cfe5d7bc2 Merge remote-tracking branch 'mst/tags/for_upstream' into staging
virtio, vhost, pc: fixes

Minor fixes since 2.8.0-rc2.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Wed 30 Nov 2016 02:25:12 AM GMT
# gpg:                using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* mst/tags/for_upstream:
  virtio-crypto: fix uninitialized variables
  loader: fix undefined behavior in rom_order_compare()
  loader: fix handling of custom address spaces when adding ROM blobs
  intel_iommu: fix incorrect device invalidate
  spec/vhost-user: fix the VHOST_USER prefix

Message-id: 1480564455-23933-1-git-send-email-mst@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-12-01 13:38:36 +00:00
Michael Roth 5c0139a8c2 spapr: fix default DRC state for coldplugged LMBs
Currently we set the initial isolation/allocation state for DRCs
associated with coldplugged LMBs to ISOLATED/UNUSABLE,
respectively, under the assumption that the guest will move this
state to UNISOLATED/USABLE.

In fact, this is only the case for LMBs added via hotplug. For
coldplugged LMBs, the guest actually assumes the initial state to
be UNISOLATED/USABLE.

In practice, this only becomes an issue when we attempt to unplug
one of these LMBs, where the guest kernel will issue an
rtas-get-sensor-state call to check that the corresponding DRC is
in an USABLE state before it will release the LMB back to
QEMU. If the returned state is otherwise, the guest will assume no
further action is needed, which bypasses the QEMU-side cleanup that
occurs during the USABLE->UNUSABLE transition. This results in
LMBs and their corresponding pc-dimm devices to stick around
indefinitely.

This patch fixes the issue by manually setting DRCs associated with
cold-plugged LMBs to UNISOLATED/ALLOCATED, but leaving the hotplug
state untouched. As it turns out, this is analogous to the handling
for cold-plugged CPUs in spapr_core_plug().

Cc: qemu-ppc@nongnu.org
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-12-01 13:41:00 +11:00
Gonglei 9730280d54 virtio-crypto: fix uninitialized variables
Though crypto_cfg.reserve is an unused field, let me
initialize the structure in order to make coverity happy.

*** CID 1365923:  Uninitialized variables  (UNINIT)
/hw/virtio/virtio-crypto.c: 851 in virtio_crypto_get_config()
845         stl_le_p(&crypto_cfg.mac_algo_h, c->conf.mac_algo_h);
846         stl_le_p(&crypto_cfg.aead_algo, c->conf.aead_algo);
847         stl_le_p(&crypto_cfg.max_cipher_key_len, c->conf.max_cipher_key_len);
848         stl_le_p(&crypto_cfg.max_auth_key_len, c->conf.max_auth_key_len);
849         stq_le_p(&crypto_cfg.max_size, c->conf.max_size);
850
>>>     CID 1365923:  Uninitialized variables  (UNINIT)
>>>     Using uninitialized value "crypto_cfg". Field "crypto_cfg.reserve"
       is uninitialized when calling "memcpy".
      [Note: The source code implementation of the function
       has been overridden by a builtin model.]
851         memcpy(config, &crypto_cfg, c->config_size);
852     }
853

Rported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-30 04:22:18 +02:00
Laszlo Ersek 1b57bd4f2f loader: fix undefined behavior in rom_order_compare()
According to ISO C99 / N1256 (referenced in HACKING):

> 6.5.8 Relational operators
>
> 4 For the purposes of these operators, a pointer to an object that is
>   not an element of an array behaves the same as a pointer to the first
>   element of an array of length one with the type of the object as its
>   element type.
>
> 5 When two pointers are compared, the result depends on the relative
>   locations in the address space of the objects pointed to. If two
>   pointers to object or incomplete types both point to the same object,
>   or both point one past the last element of the same array object, they
>   compare equal. If the objects pointed to are members of the same
>   aggregate object, pointers to structure members declared later compare
>   greater than pointers to members declared earlier in the structure,
>   and pointers to array elements with larger subscript values compare
>   greater than pointers to elements of the same array with lower
>   subscript values. All pointers to members of the same union object
>   compare equal. If the expression /P/ points to an element of an array
>   object and the expression /Q/ points to the last element of the same
>   array object, the pointer expression /Q+1/ compares greater than /P/.
>   In all other cases, the behavior is undefined.

Our AddressSpace objects are allocated generally individually, and kept in
the "address_spaces" linked list, so we mustn't compare their addresses
with relops.

Convert the pointers subjected to the relop in rom_order_compare() to
"uintptr_t":

> 7.18.1.4 Integer types capable of holding object pointers
>
> 1 [...]
>
>   The following type designates an unsigned integer type with the
>   property that any valid pointer to void can be converted to this type,
>   then converted back to pointer to void, and the result will compare
>   equal to the original pointer:
>
>   /uintptr_t/
>
>   These types are optional.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-devel@nongnu.org
Fixes: 3e76099aac
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-30 04:22:18 +02:00
Laszlo Ersek aa6c6ae843 loader: fix handling of custom address spaces when adding ROM blobs
* Commit 3e76099aac ("loader: Allow a custom AddressSpace when loading
  ROMs") introduced the "Rom.as" field:

  (1) It modified the utility callers of rom_insert() to take "as" as a
      new parameter from *their* callers, and set "rom->as" from that
      parameter. The functions covered were rom_add_file() and
      rom_add_elf_program().

  (2) It also modified rom_insert() itself, to auto-assign
      "&address_space_memory", in case the external caller passed -- and
      the utility caller forwarded -- as=NULL.

  Except, commit 3e76099aac forgot to update the third utility caller of
  rom_insert(), under point (1), namely rom_add_blob().

* Later, commit 5e774eb3bd ("loader: Add AddressSpace loading support
  to uImages") added the load_uimage_as() function, and the
  rom_add_blob_fixed_as() function-like macro, with the necessary changes
  elsewhere to propagate the new "as" parameter to rom_add_blob():

    load_uimage_as()
      load_uboot_image()
        rom_add_blob_fixed_as()
          rom_add_blob()

  At this point, the signature (and workings) of rom_add_blob() had been
  broken already, and the rom_add_blob_fixed_as() macro passed its "_as"
  parameter to rom_add_blob() as "callback_opaque". Given that the
  "fw_callback" parameter itself was set to NULL (correctly), this did no
  additional damage (the opaque arg would never be used), but ultimately
  it broke the new functionality of load_uimage_as().

* The load_uimage_as() function would be put to use in one of the later
  patches, commit e481a1f63c ("generic-loader: Add a generic loader").

* We can fix this only in a unified patch now. Append "AddressSpace *as"
  to the signature of rom_add_blob(), and handle the new parameter. Pass
  NULL from all current callers, except from rom_add_blob_fixed_as(),
  where "_as" has to be bumped to the proper position.

* Note that rom_add_file() rejects the case when both "mr" and "as" are
  passed in as non-NULL. The action that this is apparently supposed to
  prevent is the

    rom->mr = mr;

  assignment (that's the only place where the "mr" parameter is used in
  rom_add_file()). In rom_add_blob() though, we have no "mr" parameter,
  and the actions done on the fw_cfg branch:

    if (fw_file_name && fw_cfg) {
        if (mc->rom_file_has_mr) {
            data = rom_set_mr(rom, OBJECT(fw_cfg), devpath);
            mr = rom->mr;
        } else {
            data = rom->data;
        }

  reflect those that are performed by rom_add_file() too (with mr==NULL):

    if (rom->fw_file && fw_cfg) {
        if ((!option_rom || mc->option_rom_has_mr) &&
            mc->rom_file_has_mr) {
            data = rom_set_mr(rom, OBJECT(fw_cfg), devpath);
        } else {
            data = rom->data;
        }

  Hence we need no additional restrictions in rom_add_blob().

* Stable is not affected as both problematic commits appeared first in
  v2.8.0-rc0.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: qemu-arm@nongnu.org
Cc: qemu-devel@nongnu.org
Fixes: 3e76099aac
Fixes: 5e774eb3bd
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-30 04:20:57 +02:00
Peter Xu 6cb99acc28 intel_iommu: fix incorrect device invalidate
"mask" needs to be inverted before use.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-30 04:20:57 +02:00
Wei Wang 5449c230fa spec/vhost-user: fix the VHOST_USER prefix
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-30 04:20:57 +02:00
Stefan Hajnoczi 1cd56fd2e1 Update version for v2.8.0-rc2 release
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-29 22:26:25 +00:00
Stefan Hajnoczi f05234df63 Merge remote-tracking branch 'kwolf/tags/for-upstream' into staging
Block layer patches for 2.8.0-rc2

# gpg: Signature made Tue 29 Nov 2016 03:16:10 PM GMT
# gpg:                using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* kwolf/tags/for-upstream:
  docs: Specify that cache-clean-interval is only supported in Linux
  qcow2: Remove stale comment
  qcow2: Allow 'cache-clean-interval' in Linux only
  qcow2: Make qcow2_cache_table_release() work only in Linux

Message-id: 1480436227-2211-1-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-29 17:06:39 +00:00
Paolo Bonzini 7ecf44a579 rules.mak: Also try -r to build modules
Building qemu fails in distributions where gcc enables PIE by default
(e.g. Debian unstable) with:

/usr/bin/ld: -r and -pie may not be used together

You have to use -r instead of -Wl,-r to avoid gcc passing -pie to the linker
when PIE is enabled and a relocatable object is passed.  However, clang
does not know about -r, so try -Wl,-r first.

[This is a fix for commit c96f0ee6a6
("rules.mak: Use -r instead of -Wl, -r to fix building when PIE is
default") which mostly worked but broke the ./configure --enable-modules
build with clang.
--Stefan]

Reported-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161129153720.29747-1-pbonzini@redhat.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-29 16:21:05 +00:00
Stefan Hajnoczi 51cd8ef8ad Merge remote-tracking branch 'fam/tags/for-upstream' into staging
# gpg: Signature made Tue 29 Nov 2016 10:33:34 AM GMT
# gpg:                using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021  AD56 CA35 624C 6A91 71C6

* fam/tags/for-upstream:
  hbitmap: Fix shifts of constants by granularity

Message-id: 20161129103438.15955-1-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-29 14:15:14 +00:00
Stefan Hajnoczi 38e532aa74 Merge remote-tracking branch 'public/tags/tracing-pull-request' into staging
# gpg: Signature made Tue 29 Nov 2016 10:07:16 AM GMT
# gpg:                using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* public/tags/tracing-pull-request:
  configure: fix LTTng UST tracing backend detection

Message-id: 20161129100724.15207-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-29 10:21:33 +00:00
Stefan Hajnoczi c5b95f6be7 Merge remote-tracking branch 'bonzini/tags/for-upstream' into staging
Small fixes for rc2.

# gpg: Signature made Mon 28 Nov 2016 03:45:20 PM GMT
# gpg:                using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* bonzini/tags/for-upstream:
  rules.mak: Use -r instead of -Wl, -r to fix building when PIE is default
  migration/pcspk: Turn migration of pcspk off for 2.7 and older
  migration/pcspk: Add a property to state if pcspk is migrated
  pci-assign: sync MSI/MSI-X cap and table with PCIDevice
  megasas: clean up and fix request completion/cancellation
  megasas: do not call pci_dma_unmap after having freed the frame once

Message-id: 1480372837-109736-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-29 10:05:07 +00:00
Max Reitz 6725f887ac hbitmap: Fix shifts of constants by granularity
An hbitmap's granularity may be anything from 0 to 63, so when shifting
constants by its value, they should not be plain ints.

Even having changed the types, hbitmap_serialization_granularity() still
tries to shift 64 to the right by the granularity. This operation is
undefined if the granularity is greater than 57. Adding an assertion is
fine for now, because serializing is done only in tests so far, but this
means that only bitmaps with a granularity below 58 can be serialized
and we should thus add a hbitmap_is_serializable() function later.

One of the two places touched in this patch uses
QEMU_ALIGN_UP(x, 1 << y). We can use ROUND_UP() there, since the second
parameter is obviously a power of two.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20161115224732.1334-1-mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
2016-11-29 17:46:36 +08:00
Francis Deslauriers c79ed23df5 configure: fix LTTng UST tracing backend detection
The detection program needs to be linked with -ldl to build succesfully
with recent versions of LTTng-UST.

We also need to add -ldl to the libs required to build the LTTng-UST
backend (lttng_ust_libs).

Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Message-id: 1480348337-24271-1-git-send-email-francis.deslauriers@efficios.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-29 09:36:12 +00:00
Stefan Hajnoczi 5a55760226 Merge remote-tracking branch 'sstabellini/tags/xen-20161128-tag' into staging
Xen 2016/11/28

# gpg: Signature made Mon 28 Nov 2016 07:37:33 PM GMT
# gpg:                using RSA key 0x894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <sstabellini@kernel.org>"
# gpg:                 aka "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3  0AEA 894F 8F48 70E1 AE90

* sstabellini/tags/xen-20161128-tag:
  xen: ignore direction in bufioreq handling
  xen: slightly simplify bufioreq handling
  xen: fix quad word bufioreq handling
  xen_disk: split discard input to match internal representation

Message-id: alpine.DEB.2.10.1611281137590.21858@sstabellini-ThinkPad-X260
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-29 09:28:51 +00:00
Stefan Hajnoczi 517dcb8785 Merge remote-tracking branch 'pm215/tags/pull-target-arm-20161128' into staging
target-arm queue:
 * hw/arm/boot: fix crash handling device trees with no /chosen
   or /memory nodes
 * generic-loader: only set PC if a CPU is specified

# gpg: Signature made Mon 28 Nov 2016 01:47:21 PM GMT
# gpg:                using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* pm215/tags/pull-target-arm-20161128:
  arm: Create /chosen and /memory devicetree nodes if necessary
  generic-loader: file: Only set a PC if a CPU is specified

Message-id: 1480341071-5367-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-29 09:28:24 +00:00
Jan Beulich e514379de5 xen: ignore direction in bufioreq handling
There's no way to communicate back read data, so only writes can ever
be usefully specified. Ignore the field, paving the road for eventually
re-using the bit for something else in a few (many?) years time.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2016-11-28 11:26:29 -08:00
Jan Beulich f37f29d314 xen: slightly simplify bufioreq handling
There's no point setting fields always receiving the same value on each
iteration, as handle_ioreq() doesn't alter them anyway. Set state and
count once ahead of the loop, drop the redundant clearing of
data_is_ptr, and avoid the meaningless (because count is 1) setting of
df altogether.

Also avoid doing an unsigned long calculation of size when the field to
be initialized is only 32 bits wide (and the shift value in the range
0...3).

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2016-11-28 11:26:04 -08:00
Jan Beulich ff3b8b8f86 xen: fix quad word bufioreq handling
We should not consume the second slot if it didn't get written yet.
Normal writers - i.e. Xen - would not update write_pointer between the
two writes, but the page may get fiddled with by the guest itself, and
we're better off avoiding to enter an infinite loop in that case.

Reported-by: yanghongke <yanghongke@huawei.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2016-11-28 11:25:23 -08:00
Stefan Hajnoczi 406c97c41f Merge remote-tracking branch 'ehabkost/tags/x86-pull-request' into staging
Coverity fix on target-i386

# gpg: Signature made Fri 25 Nov 2016 09:29:11 PM GMT
# gpg:                using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* ehabkost/tags/x86-pull-request:
  target-i386: Remove unused local_err variable

Message-id: 1480109401-19470-1-git-send-email-ehabkost@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-28 16:33:41 +00:00
Adrian Bunk c96f0ee6a6 rules.mak: Use -r instead of -Wl, -r to fix building when PIE is default
Building qemu fails in distributions where gcc enables PIE by default
(e.g. Debian unstable) with:

/usr/bin/ld: -r and -pie may not be used together

Use -r instead of -Wl,-r to avoid gcc passing -pie to the linker
when PIE is enabled and a relocatable object is passed.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Message-Id: <20161127162817.15144-1-bunk@stusta.de>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-11-28 16:45:12 +01:00
Dr. David Alan Gilbert f9f885b78a migration/pcspk: Turn migration of pcspk off for 2.7 and older
To keep backwards migration compatibility allow us to turn pcspk
migration off.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20161128133201.16104-3-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-11-28 16:45:12 +01:00
Dr. David Alan Gilbert 04e27c6bb0 migration/pcspk: Add a property to state if pcspk is migrated
Allow us to turn migration of pcspk off for compatibility.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20161128133201.16104-2-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-11-28 16:45:12 +01:00
Peter Xu 64e184e260 pci-assign: sync MSI/MSI-X cap and table with PCIDevice
Since commit e1d4fb2d ("kvm-irqchip: x86: add msi route notify fn"),
kvm_irqchip_add_msi_route() starts to use pci_get_msi_message() to fetch
MSI info. This requires that we setup MSI related fields in PCIDevice.
For most devices, that won't be a problem, as long as we are using
general interfaces like msi_init()/msix_init().

However, for pci-assign devices, MSI/MSI-X is treated differently - PCI
assign devices are maintaining its own MSI table and cap information in
AssignedDevice struct. however that's not synced up with PCIDevice's
fields. That will leads to pci_get_msi_message() failed to find correct
MSI capability, even with an NULL msix_table.

A quick fix is to sync up the two places: both the capability bits and
table address for MSI/MSI-X.

Reported-by: Changlimin <changlimin@h3c.com>
Tested-by: Changlimin <changlimin@h3c.com>
Cc: qemu-stable@nongnu.org
Fixes: e1d4fb2d ("kvm-irqchip: x86: add msi route notify fn")
Signed-off-by: Peter Xu <peterx@redhat.com>

Message-Id: <1480042522-16551-1-git-send-email-peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-11-28 15:11:17 +01:00
Paolo Bonzini 9e55d58806 megasas: clean up and fix request completion/cancellation
megasas_command_cancel is a callback; it should report the abort in
the frame, not try another abort!  Compare for instance with
mptsas_request_cancelled.

So extract the common bits for request completion in a new function
megasas_complete_command, call it from both the .complete and .cancel
callbacks, and remove duplicate pieces from the DCMD path.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20161110152751.4267-2-pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-11-28 15:11:17 +01:00
Paolo Bonzini 75f19f8c30 megasas: do not call pci_dma_unmap after having freed the frame once
Commit 8cc4678 ("megasas: remove useless check for cmd->frame", 2016-07-17) was
wrong because I trusted Coverity too much.  It turns out that there _is_ a
path through which cmd->frame can become NULL.  After megasas_handle_frame's
switch (md->frame->header.frame_cmd), megasas_init_firmware can be called.
From there, megasas_reset_frames will call megasas_unmap_frame which resets
cmd->frame = NULL.

However, there is another bug to fix in there, because megasas_unmap_frame
is called again after setting the command status.  In this case QEMU should
not do anything, instead it calls pci_dma_unmap again.  Harmless, but
better fix it.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-11-28 15:11:17 +01:00
Guenter Roeck b77257d7ba arm: Create /chosen and /memory devicetree nodes if necessary
While customary, the /chosen and /memory devicetree nodes do not have to
exist. Create if necessary. Also create the /memory/device_type property
if needed.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 1479346221-18474-1-git-send-email-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-11-28 11:32:34 +00:00
Alistair Francis 6aa3a61657 generic-loader: file: Only set a PC if a CPU is specified
This patch fixes the generic-loader file loading to only set the program
counter if a CPU is specified. This follows what is written in the
documentation and was always part of the original intention.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 537bf4d08be7acf7a89b590cff69e19db7f0a6cd.1478908712.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-11-28 11:25:58 +00:00
Eduardo Habkost 685479bd5d target-i386: Remove unused local_err variable
local_err can never be set to non-NULL. Remove the variable.

Detected by Coverity:

    *** CID 1365201:  Possible Control flow issues  (DEADCODE)
    /target-i386/cpu.c: 2050 in x86_cpu_parse_featurestr()
    2044             prop->value = g_strdup(val);
    2045             prop->errp = &error_fatal;
    2046             qdev_prop_register_global(prop);
    2047         }
    2048
    2049         if (local_err) {
    >>>     CID 1365201:  Possible Control flow issues  (DEADCODE)
    >>>     Execution cannot reach this statement: "error_propagate(errp, local...".
    2050             error_propagate(errp, local_err);
    2051         }
    2052     }
    2053
    2054     static void x86_cpu_load_features(X86CPU *cpu, Error **errp);
    2055     static int x86_cpu_filter_features(X86CPU *cpu);

Reported-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1480087313-15102-1-git-send-email-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-11-25 15:12:23 -02:00
Alberto Garcia 8f57758311 docs: Specify that cache-clean-interval is only supported in Linux
Make it clear that having Linux is a hard requirement for this
feature.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-11-25 13:51:31 +01:00
Alberto Garcia a8b99dd516 qcow2: Remove stale comment
We haven't been using CONFIG_MADVISE since 02d0e09503

Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-11-25 13:51:30 +01:00
Alberto Garcia 91203f08f0 qcow2: Allow 'cache-clean-interval' in Linux only
The cache-clean-interval option of qcow2 only works on Linux. However
we allow setting it in other systems regardless of whether it works or
not.

In those systems this option is not simply a no-op: it actually
invalidates perfectly valid cache tables for no good reason without
freeing their memory.

This patch forbids using that option in non-Linux systems.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-11-25 13:51:30 +01:00
Alberto Garcia 2f2c8d6b37 qcow2: Make qcow2_cache_table_release() work only in Linux
We are using QEMU_MADV_DONTNEED to discard the memory of individual L2
cache tables. The problem with this is that those semantics are
specific to the Linux madvise() system call. Other implementations of
madvise() (including the very Linux implementation of posix_madvise())
don't do that, so we cannot use them for the same purpose.

This patch makes the code Linux-specific and uses madvise() directly
since there's no point in going through qemu_madvise() for this.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-11-25 13:51:30 +01:00
Stefan Hajnoczi 511008f5cc Merge remote-tracking branch 'vivier-m68k/tags/m68k-for-2.8-pull-request' into staging
# gpg: Signature made Thu 24 Nov 2016 03:25:39 PM GMT
# gpg:                using RSA key 0xF30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>"
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* vivier-m68k/tags/m68k-for-2.8-pull-request:
  target-m68k: fix muluw/mulsw
  target-m68k: Fix cmpa operand size
  target-m68k: fix EXG instruction

Message-id: 1480001287-17515-1-git-send-email-laurent@vivier.eu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-25 12:03:36 +00:00
Stefan Hajnoczi 628d0a4bdf Merge remote-tracking branch 'mcayland/tags/qemu-openbios-signed' into staging
Update OpenBIOS images

 # gpg: Signature made Thu 24 Nov 2016 09:29:40 PM GMT
 # gpg:                using RSA key 0x5BC2C56FAE0F321F
 # gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
 # Primary key fingerprint: CC62 1AB9 8E82 200D 915C  C9C4 5BC2 C56F AE0F 321F

* mcayland/tags/qemu-openbios-signed:
  Update OpenBIOS images to ef8a14e built from submodule.

Message-id: 20161124214109.GB29463@kentang.lan
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-25 10:33:26 +00:00
Mark Cave-Ayland 06c33754a1 Update OpenBIOS images to ef8a14e built from submodule.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2016-11-24 21:26:00 +00:00
Laurent Vivier 4a18cd44f3 target-m68k: fix muluw/mulsw
"The multiplier and multiplicand are both word operands, and the result
is a long-word operand."

So compute flags on a long-word result, not on a word result.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-11-24 16:24:27 +01:00
Stefan Hajnoczi 0fecd0292c Merge remote-tracking branch 'gkurz/tags/for-upstream' into staging
This pull request fixes some leaks (memory, fd) in the handle and proxy
backends.

 # gpg: Signature made Wed 23 Nov 2016 12:53:41 PM GMT
 # gpg:                using DSA key 0x02FC3AEB0101DBC2
 # gpg: Good signature from "Greg Kurz <groug@kaod.org>"
 # gpg:                 aka "Greg Kurz <groug@free.fr>"
 # gpg:                 aka "Greg Kurz <gkurz@fr.ibm.com>"
 # gpg:                 aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
 # gpg:                 aka "Gregory Kurz (Groug) <groug@free.fr>"
 # gpg:                 aka "Gregory Kurz (Cimai Technology) <gkurz@cimai.com>"
 # gpg:                 aka "Gregory Kurz (Meiosys Technology) <gkurz@meiosys.com>"
 # gpg: WARNING: This key is not certified with a trusted signature!
 # gpg:          There is no indication that the signature belongs to the owner.
 # Primary key fingerprint: 2BD4 3B44 535E C0A7 9894  DBA2 02FC 3AEB 0101 DBC2

* gkurz/tags/for-upstream:
  9pfs: add cleanup operation for proxy backend driver
  9pfs: add cleanup operation for handle backend driver
  9pfs: add cleanup operation in FileOperations
  9pfs: adjust the order of resource cleanup in device unrealize

Message-id: 1479920298-24983-1-git-send-email-groug@kaod.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-24 10:16:23 +00:00
Stefan Hajnoczi 801edfcbb5 Merge remote-tracking branch 'rth/tags/pull-axp-20161123' into staging
Fix alpha smp interrupt masking

# gpg: Signature made Wed 23 Nov 2016 12:42:45 PM GMT
# gpg:                using RSA key 0xAD1270CC4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"
# Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC  16A4 AD12 70CC 4DD0 279B

* rth/tags/pull-axp-20161123:
  target-alpha: Fix interrupt mask for cpu1

Message-id: 1479905195-7424-1-git-send-email-rth@twiddle.net
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-24 09:50:32 +00:00
Laurent Vivier 5436c29d78 target-m68k: Fix cmpa operand size
"The size of the operation can be specified as word or long.
Word length source operands are sign-extended to 32 bits for
comparison."

So comparison is always done using OS_LONG.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-11-24 09:39:05 +01:00
Laurent Vivier c090c97d92 target-m68k: fix EXG instruction
opcodes of "EXG Ax,Ay" and "EXG Dx,Dy" have been swapped

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-11-24 09:38:44 +01:00
Olaf Hering 7875efb9f6 xen_disk: split discard input to match internal representation
The guest sends discard requests as u64 sector/count pairs, but the
block layer operates internally with s64/s32 pairs. The conversion
leads to IO errors in the guest, the discard request is not processed.

  domU.cfg:
  'vdev=xvda, format=qcow2, backendtype=qdisk, target=/x.qcow2'
  domU:
  mkfs.ext4 -F /dev/xvda
  Discarding device blocks: failed - Input/output error

Fix this by splitting the request into chunks of BDRV_REQUEST_MAX_SECTORS.
Add input range checking to avoid overflow.

Fixes f313520 ("xen_disk: add discard support")

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2016-11-23 10:47:48 -08:00
Li Qiang 898ae90a44 9pfs: add cleanup operation for proxy backend driver
In the init operation of proxy backend dirver, it allocates a
V9fsProxy struct and some other resources. We should free these
resources when the 9pfs device is unrealized. This is what this
patch does.

Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
2016-11-23 13:53:34 +01:00
Li Qiang 971f406b77 9pfs: add cleanup operation for handle backend driver
In the init operation of handle backend dirver, it allocates a
handle_data struct and opens a mount file. We should free these
resources when the 9pfs device is unrealized. This is what this
patch does.

Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
2016-11-23 13:53:34 +01:00
Li Qiang 702dbcc274 9pfs: add cleanup operation in FileOperations
Currently, the backend of VirtFS doesn't have a cleanup
function. This will lead resource leak issues if the backed
driver allocates resources. This patch addresses this issue.

Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
2016-11-23 13:53:34 +01:00
Li Qiang 4774718e5c 9pfs: adjust the order of resource cleanup in device unrealize
Unrealize should undo things that were set during realize in
reverse order. So should do in the error path in realize.

Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
2016-11-23 13:53:34 +01:00
Stefan Hajnoczi 659fc8d342 Merge remote-tracking branch 'dgibson/tags/ppc-for-2.8-20161123' into staging
ppc patch queue 2016-11-23

Here's the first set of 2.8 hard freeze bugfixes for ppc.

The biggest thing here is a batch of fixes for migration breakages in
both 2.7 and current 2.8.  Alas, there is at least one more migration
problem, which prevents memory unplug after a migration.  I hoped to
include a fix for that here, but it turned out to have some problems
bigger than those it was solving.  So, I expect at least one more hard
freeze pull request.

There are also a few other assorted bug fixes.

# gpg: Signature made Wed 23 Nov 2016 02:25:42 AM GMT
# gpg:                using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* dgibson/tags/ppc-for-2.8-20161123:
  spapr: Fix 2.7<->2.8 migration of PCI host bridge
  Revert "spapr: Fix migration of PCI host bridges from qemu-2.7"
  target-ppc: Allow eventual removal of old migration mistakes
  migration: Add VMSTATE_UINTTL_TEST()
  target-ppc: Fix CPU migration from qemu-2.6 <-> later versions
  ppc: Make uninorth interrupt swizzling identical to Grackle
  target-ppc: fix index array of national digits
  hw/char/spapr_vty: Return amount of free buffer entries in vty_can_receive()
  ppc: BOOK3E: nothing should be done when MSR:PR is set
  spapr: migration support for CAS-negotiated option vectors
  tests/postcopy: Use KVM on ppc64 only if it is KVM-HV

Message-id: 1479869383-16162-1-git-send-email-david@gibson.dropbear.id.au
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-23 11:46:15 +00:00
Stefan Hajnoczi f0c10c392f Merge remote-tracking branch 'bonzini/tags/for-upstream' into staging
Small fixes for rc1.

# gpg: Signature made Tue 22 Nov 2016 10:26:56 PM GMT
# gpg:                using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* bonzini/tags/for-upstream:
  scsi/esp: do not raise an interrupt when reading the FIFO register
  nbd: Allow unmap and fua during write zeroes
  cpu_ldst.h: use correct guest address parameter

Message-id: 1479853676-35995-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-23 11:44:29 +00:00
David Gibson 5c4537bded spapr: Fix 2.7<->2.8 migration of PCI host bridge
daa2369 "spapr_pci: Add a 64-bit MMIO window" subtly broke migration
from qemu-2.7 to the current version.  It split the device's MMIO
window into two pieces for 32-bit and 64-bit MMIO.

The patch included backwards compatibility code to convert the old
property into the new format.  However, the property value was also
transferred in the migration stream and compared with a (probably
unwise) VMSTATE_EQUAL.  So, the "raw" value from 2.7 is compared to
the new style converted value from (pre-)2.8 giving a mismatch and
migration failure.

Along with the actual field that caused the breakage, there are
several other ill-advised VMSTATE_EQUAL()s.  To fix forwards
migration, we read the values in the stream into scratch variables and
ignore them, instead of comparing for equality.  To fix backwards
migration, we populate those scratch variables in pre_save() with
adjusted values to match the old behaviour.

To permit the eventual possibility of removing this cruft from the
stream, we only include these compatibility fields if a new
'pre-2.8-migration' property is set.  We clear it on the pseries-2.8
machine type, which obviously can't be migrated backwards, but set it
on earlier machine type versions.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2016-11-23 12:00:48 +11:00
David Gibson 5a78b821eb Revert "spapr: Fix migration of PCI host bridges from qemu-2.7"
This reverts commit 9b54ca0ba7.

The commit above corrected a migration breakage between qemu-2.7 and
qemu-2.8.  However it did so by advancing the migration version for
the PCI host bridge, which obviously breaks migration backwards to
earlier qemu versions.

Although it's not totally essential, we'd like to maintain the
possibility for backwards migration, so revert the change in
preparation for a better fix.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2016-11-23 12:00:48 +11:00
David Gibson 146c11f16f target-ppc: Allow eventual removal of old migration mistakes
Until very recently, the vmstate for ppc cpus included some poorly
thought out VMSTATE_EQUAL() components, that can easily break
migration compatibility, and did so between qemu-2.6 and later
versions.  A hack was recently added which fixes this migration
breakage, but it leaves the unhelpful cruft of these fields in the
migration stream.

This patch adds a new cpu property allowing these fields to be removed
from the stream entirely.  For the pseries-2.8 machine type - which
comes after the fix - and for all non-pseries machine types - which
aren't mature enough to care about cross-version migration - we remove
the fields from the stream.

For pseries-2.7 and earlier, The migration hack remains in place,
allowing backwards and forwards migration with the older machine
types.

This restricts the migration compatibility cruft to older machine
types, and at least opens the possibility of eventually deprecating
and removing it entirely.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2016-11-23 12:00:48 +11:00
David Gibson 3fed86eefc migration: Add VMSTATE_UINTTL_TEST()
include/migration/cpu.h defines VMSTATE_UINTTL() and several variants
for migrating target_ulong fields.  It's defined in terms of
VMSTATE_UINT32() or VMSTATE_UINT64() as appropriate.

It doesn't, however, include a VMSTATE_UINTTL_TEST() variant, which
I'm going to need shortly.  So, add it.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
2016-11-23 12:00:48 +11:00
David Gibson 16a2497bd4 target-ppc: Fix CPU migration from qemu-2.6 <-> later versions
When migration for target-ppc was converted to vmstate, several
VMSTATE_EQUAL() checks were foolishly included of things that really
should be internal state.  Specifically we verified equality of the
insns_flags and insns_flags2 fields, which are used within TCG to
determine which groups of instructions are available on this cpu
model.  Between qemu-2.6 and qemu-2.7 we made some changes to these
classes which broke migration.

This path fixes migration both forwards and backwards.  On migration
from 2.6 to later versions we import the fields into teporary
variables, which we then ignore.  In migration backwards, we populate
the temporary fields from the runtime fields, but mask out the bits
which were added after qemu-2.6, allowing the VMSTATE_EQUAL in
qemu-2.6 to accept the stream.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
2016-11-23 12:00:48 +11:00
Benjamin Herrenschmidt 39d97e14a1 ppc: Make uninorth interrupt swizzling identical to Grackle
It's currently broken as it uses an incorrect shift, it tries
to use the slot number but uses the top bits of the bus number
instead.

Note: Neither implementation matches what OpenBIOS ends up putting
in the device-tree either, which will have to be fixed separately.

This is not quite correct for modelling a real Mac since Apple
tend to tie all 4 interrupt lines of a slot together and have
separate interrupts for every slot and every motherboard devices
going straight to the PIC but we'll sort that out later.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-11-23 12:00:48 +11:00
Jose Ricardo Ziviani a813fe7362 target-ppc: fix index array of national digits
Fixes the big endian array access of national digits, from commits
b815587 and e2106d7.

Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-11-23 12:00:48 +11:00
Thomas Huth 8a273cbe53 hw/char/spapr_vty: Return amount of free buffer entries in vty_can_receive()
The can_receive() callbacks of the character devices should return
the amount of characters that can be accepted at once, not just a
boolean value (which rather means only one character at a time).

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-11-23 12:00:48 +11:00
Vladimir Svoboda 0d28aa197d ppc: BOOK3E: nothing should be done when MSR:PR is set
The server architecture (BOOK3S) specifies that any instruction that
sets MSR:PR will also set MSR:EE, IR and DR.
However there is no such behavior specification for the embedded
architecture (BOOK3E).

Signed-off-by: Vladimir Svoboda <ze.vlad@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-11-23 12:00:48 +11:00
Michael Roth 62ef3760d4 spapr: migration support for CAS-negotiated option vectors
With the additional of the OV5_HP_EVT option vector, we now have
certain functionality (namely, memory unplug) that checks at run-time
for whether or not the guest negotiated the option via CAS. Because
we don't currently migrate these negotiated values, we are unable
to unplug memory from a guest after it's been migrated until after
the guest is rebooted and CAS-negotiation is repeated.

This patch fixes this by adding CAS-negotiated options to the
migration stream. We do this using a subsection, since the
negotiated value of OV5_HP_EVT is the only option currently needed
to maintain proper functionality for a running guest.

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-11-23 12:00:48 +11:00
Thomas Huth 171da9d5db tests/postcopy: Use KVM on ppc64 only if it is KVM-HV
The ppc64 postcopy test does not work with KVM-PR, and it is also
causing annoying warning messages when run on a x86 host. So let's
use KVM here only if we know that we're running with KVM-HV (which
automatically also means that we're running on a ppc64 host), and
fall back to TCG otherwise.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-11-23 12:00:48 +11:00
Stefan Hajnoczi 00227fefd2 Update version for v2.8.0-rc1 release
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-22 22:29:08 +00:00
Hervé Poussineau 1d895feb3b scsi/esp: do not raise an interrupt when reading the FIFO register
This fixes SCSI adapter self-tests done in MIPS Jazz emulation,
broken since ff589551c8.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <1479508397-8443-1-git-send-email-hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-11-22 23:26:51 +01:00
Eric Blake 169407e1f7 nbd: Allow unmap and fua during write zeroes
Commit fa778fff wired up support to send the NBD_CMD_WRITE_ZEROES,
but forgot to inform the block layer that FUA unmapping of zeroes is
supported.  Without BDRV_REQ_MAY_UNMAP listed as a supported flag,
the block layer will always insist on the NBD layer passing
NBD_CMD_FLAG_NO_HOLE, resulting in the server always allocating
things even when it was desired to let the server punch holes.
Similarly, failing to set BDRV_REQ_FUA means that the client may
send unnecessary NBD_CMD_FLUSH when it could have instead used the
NBD_CMD_FLAG_FUA bit.

CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1479413642-22463-2-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-11-22 23:26:51 +01:00
Bobby Bingham c2a8531690 cpu_ldst.h: use correct guest address parameter
In the user emulation code path, tlb_vaddr_to_host erronesously passed
vaddr as the guest address to be translated, instead of addr, the parameter
which actually contained the guest address.

This resulted in incorrect addresses being used when emulating block copy
(mvc/mvpg) and block clear (xc) instructions for the s390x target.

Signed-off-by: Bobby Bingham <koorogi@koorogi.info>
Message-Id: <20161113050523.23909-1-koorogi@koorogi.info>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-11-22 23:26:51 +01:00
Stefan Hajnoczi 01d7d15ce3 Merge remote-tracking branch 'sstabellini/tags/xen-20161122-tag' into staging
Xen 2016/11/22

# gpg: Signature made Tue 22 Nov 2016 06:41:23 PM GMT
# gpg:                using RSA key 0x894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <sstabellini@kernel.org>"
# gpg:                 aka "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3  0AEA 894F 8F48 70E1 AE90

* sstabellini/tags/xen-20161122-tag:
  xen: attach pvusb usb bus to backend qdev
  xen: create qdev for each backend device
  qdev: add function qdev_set_id()
  xen: add an own bus for xen backend devices
  xen: fix ioreq handling

Message-id: alpine.DEB.2.10.1611221037010.21858@sstabellini-ThinkPad-X260
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-22 19:30:39 +00:00
Stefan Hajnoczi 76989f4ffa Merge remote-tracking branch 'kwolf/tags/for-upstream' into staging
Block layer patches for 2.8.0-rc1

# gpg: Signature made Tue 22 Nov 2016 03:55:38 PM GMT
# gpg:                using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* kwolf/tags/for-upstream:
  block: Pass unaligned discard requests to drivers
  block: Return -ENOTSUP rather than assert on unaligned discards
  block: Let write zeroes fallback work even with small max_transfer
  qcow2: Inform block layer about discard boundaries

Message-id: 1479830693-26676-1-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-22 19:30:03 +00:00
Stefan Hajnoczi 5167dff8c7 Merge remote-tracking branch 'kraxel/tags/pull-seabios-20161122-1' into staging
seabios: update to 1.10.1 stable release

# gpg: Signature made Tue 22 Nov 2016 09:12:39 AM GMT
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* kraxel/tags/pull-seabios-20161122-1:
  seabios: update to 1.10.1 stable release

Message-id: 1479806144-25599-1-git-send-email-kraxel@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-22 19:29:30 +00:00
Juergen Gross f1784a222e xen: attach pvusb usb bus to backend qdev
Attach the usb bus of a new pvusb controller to the qdev associated
with the Xen backend. Any device connected to that controller can now
specify the bus and port directly via its properties.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2016-11-22 10:29:41 -08:00
Juergen Gross 3a6c9172ac xen: create qdev for each backend device
Create a qdev plugged to the xen-sysbus for each new backend device.
This device can be used as a parent for all needed devices of that
backend. The id of the new device will be "xen-<type>-<dev>" with
<type> being the xen backend type (e.g. "qdisk") and <dev> the xen
backend number of the type under which it is to be found in xenstore.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2016-11-22 10:29:39 -08:00
Juergen Gross ce49b734b4 qdev: add function qdev_set_id()
In order to have an easy way to add a new qdev with a specific id
carve out the needed functionality from qdev_device_add() into a new
function qdev_set_id().

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2016-11-22 10:29:37 -08:00
Juergen Gross 873d57abba xen: add an own bus for xen backend devices
Add a bus for Xen backend devices in order to be able to establish a
dedicated device path for pluggable devices.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2016-11-22 10:29:32 -08:00
Jan Beulich b85f9dfdb1 xen: fix ioreq handling
Avoid double fetches and bounds check size to avoid overflowing
internal variables.

This is CVE-2016-9381 / XSA-197.

Reported-by: yanghongke <yanghongke@huawei.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2016-11-22 10:29:22 -08:00
Richard Henderson 424ad8388f target-alpha: Fix interrupt mask for cpu1
A typo prevents ISA interrupts from being recognized on cpu0,
which is where the smp kernel normally wants to see them.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-11-22 16:53:53 +01:00
Eric Blake 3482b9bc41 block: Pass unaligned discard requests to drivers
Discard is advisory, so rounding the requests to alignment
boundaries is never semantically wrong from the data that
the guest sees.  But at least the Dell Equallogic iSCSI SANs
has an interesting property that its advertised discard
alignment is 15M, yet documents that discarding a sequence
of 1M slices will eventually result in the 15M page being
marked as discarded, and it is possible to observe which
pages have been discarded.

Between commits 9f1963b and b8d0a980, we converted the block
layer to a byte-based interface that ultimately ignores any
unaligned head or tail based on the driver's advertised
discard granularity, which means that qemu 2.7 refuses to
pass any discard request smaller than 15M down to the Dell
Equallogic hardware.  This is a slight regression in behavior
compared to earlier qemu, where a guest executing discards
in power-of-2 chunks used to be able to get every page
discarded, but is now left with various pages still allocated
because the guest requests did not align with the hardware's
15M pages.

Since the SCSI specification says nothing about a minimum
discard granularity, and only documents the preferred
alignment, it is best if the block layer gives the driver
every bit of information about discard requests, rather than
rounding it to alignment boundaries early.

Rework the block layer discard algorithm to mirror the write
zero algorithm: always peel off any unaligned head or tail
and manage that in isolation, then do the bulk of the request
on an aligned boundary.  The fallback when the driver returns
-ENOTSUP for an unaligned request is to silently ignore that
portion of the discard request; but for devices that can pass
the partial request all the way down to hardware, this can
result in the hardware coalescing requests and discarding
aligned pages after all.

Reported by: Peter Lieven <pl@kamp.de>
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-11-22 15:59:23 +01:00
Eric Blake 49228d1e95 block: Return -ENOTSUP rather than assert on unaligned discards
Right now, the block layer rounds discard requests, so that
individual drivers are able to assert that discard requests
will never be unaligned.  But there are some ISCSI devices
that track and coalesce multiple unaligned requests, turning it
into an actual discard if the requests eventually cover an
entire page, which implies that it is better to always pass
discard requests as low down the stack as possible.

In isolation, this patch has no semantic effect, since the
block layer currently never passes an unaligned request through.
But the block layer already has code that silently ignores
drivers that return -ENOTSUP for a discard request that cannot
be honored (as well as drivers that return 0 even when nothing
was done).  But the next patch will update the block layer to
fragment discard requests, so that clients are guaranteed that
they are either dealing with an unaligned head or tail, or an
aligned core, making it similar to the block layer semantics of
write zero fragmentation.

CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-11-22 15:59:22 +01:00
Eric Blake b2f95feec5 block: Let write zeroes fallback work even with small max_transfer
Commit 443668ca rewrote the write_zeroes logic to guarantee that
an unaligned request never crosses a cluster boundary.  But
in the rewrite, the new code assumed that at most one iteration
would be needed to get to an alignment boundary.

However, it is easy to trigger an assertion failure: the Linux
kernel limits loopback devices to advertise a max_transfer of
only 64k.  Any operation that requires falling back to writes
rather than more efficient zeroing must obey max_transfer during
that fallback, which means an unaligned head may require multiple
iterations of the write fallbacks before reaching the aligned
boundaries, when layering a format with clusters larger than 64k
atop the protocol of file access to a loopback device.

Test case:

$ qemu-img create -f qcow2 -o cluster_size=1M file 10M
$ losetup /dev/loop2 /path/to/file
$ qemu-io -f qcow2 /dev/loop2
qemu-io> w 7m 1k
qemu-io> w -z 8003584 2093056

In fairness to Denis (as the original listed author of the culprit
commit), the faulty logic for at most one iteration is probably all
my fault in reworking his idea.  But the solution is to restore what
was in place prior to that commit: when dealing with an unaligned
head or tail, iterate as many times as necessary while fragmenting
the operation at max_transfer boundaries.

Reported-by: Ed Swierk <eswierk@skyportsystems.com>
CC: qemu-stable@nongnu.org
CC: Denis V. Lunev <den@openvz.org>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-11-22 15:59:22 +01:00
Eric Blake ecdbead659 qcow2: Inform block layer about discard boundaries
At the qcow2 layer, discard is only possible on a per-cluster
basis; at the moment, qcow2 silently rounds any unaligned
requests to this granularity.  However, an upcoming patch will
fix a regression in the block layer ignoring too much of an
unaligned discard request, by changing the block layer to
break up a discard request at alignment boundaries; for that
to work, the block layer must know about our limits.

However, we can't go one step further by changing
qcow2_discard_clusters() to assert that requests are always
aligned, since that helper function is reached on paths
outside of the block layer.

CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-11-22 15:59:22 +01:00
Ed Maste a7764f1548 Fix FreeBSD (10.x) build after 7dc9ae43
Include sys/user.h for declaration of 'struct kinfo_proc'.
Add -lutil to qemu-ga link for kinfo_getproc.

Signed-off-by: Ed Maste <emaste@freebsd.org>
Message-id: 1479778365-11315-1-git-send-email-emaste@freebsd.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-22 10:56:01 +00:00
Stefan Hajnoczi 06bf33cfe7 Merge remote-tracking branch 'jtc/tags/block-pull-request' into staging
# gpg: Signature made Mon 21 Nov 2016 10:12:43 PM GMT
# gpg:                using RSA key 0xBDBE7B27C0DE3057
# gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>"
# gpg:                 aka "Jeffrey Cody <jeff@codyprime.org>"
# gpg:                 aka "Jeffrey Cody <codyprime@gmail.com>"
# Primary key fingerprint: 9957 4B4D 3474 90E7 9D98  D624 BDBE 7B27 C0DE 3057

* jtc/tags/block-pull-request:
  gluster: Fix use after free in glfs_clear_preopened()

Message-id: 1479766499-29972-1-git-send-email-jcody@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-22 10:54:40 +00:00
Gerd Hoffmann cae41fda0f seabios: update to 1.10.1 stable release
git shortlog rel-1.10.0..rel-1.10.1
===================================

Igor Mammedov (1):
      drop "etc/boot-cpus" fw_cfg file and reuse legacy QEMU_CFG_NB_CPUS

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-11-22 10:12:08 +01:00
Kevin Wolf 668c0e441d gluster: Fix use after free in glfs_clear_preopened()
This fixes a use-after-free bug introduced in commit 6349c154. We need
to use QLIST_FOREACH_SAFE() when freeing elements in the loop. Spotted
by Coverity.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1479378608-11962-1-git-send-email-kwolf@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-11-21 17:04:43 -05:00
Stefan Hajnoczi ab9125c021 Merge remote-tracking branch 'sstabellini/tags/xen-20161108-tag' into staging
Xen 2016/11/08

# gpg: Signature made Tue 08 Nov 2016 07:48:12 PM GMT
# gpg:                using RSA key 0x894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <sstabellini@kernel.org>"
# gpg:                 aka "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3  0AEA 894F 8F48 70E1 AE90

* sstabellini/tags/xen-20161108-tag:
  xen: Fix xenpv machine initialisation

Message-id: alpine.DEB.2.10.1611081150170.3491@sstabellini-ThinkPad-X260
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-21 15:29:55 +00:00
Stefan Hajnoczi c36ed06e91 Merge remote-tracking branch 'mst/tags/for_upstream' into staging
virtio, vhost, pc: fixes

Most notably this fixes a regression with vhost introduced by the pull before
last.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri 18 Nov 2016 03:51:55 PM GMT
# gpg:                using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* mst/tags/for_upstream:
  acpi: Use apic_id_limit when calculating legacy ACPI table size
  ipmi: fix qemu crash while migrating with ipmi
  ivshmem: Fix 64 bit memory bar configuration
  virtio: set ISR on dataplane notifications
  virtio: access ISR atomically
  virtio: introduce grab/release_ioeventfd to fix vhost
  virtio-crypto: fix virtio_queue_set_notification() race

Message-id: 1479484366-7977-1-git-send-email-mst@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-21 11:09:58 +00:00
Eduardo Habkost 4b5b47abbf acpi: Use apic_id_limit when calculating legacy ACPI table size
The code that calculates the legacy ACPI table size for migration
compatibility uses max_cpus when calculating legacy_aml_len (the size of
the DSDT and SSDT tables). However, the SSDT grows according to APIC ID
limit, not max_cpus.

The bug is not triggered very often because of the 4k alignment on the
table size. But it can be triggered if you are unlucky enough to cross a
4k boundary.

Change the legacy_aml_len calculation to use apic_id_limit, to calculate
the right size.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-18 17:50:09 +02:00
ZhuangYanying d668fc4c7c ipmi: fix qemu crash while migrating with ipmi
Qemu crash in the source side while migrating, after starting ipmi service inside vm.

./x86_64-softmmu/qemu-system-x86_64 --enable-kvm -smp 4 -m 4096 \
-drive file=/work/suse/suse11_sp3_64_vt,format=raw,if=none,id=drive-virtio-disk0,cache=none \
-device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x5,drive=drive-virtio-disk0,id=virtio-disk0 \
-vnc :99 -monitor vc -device ipmi-bmc-sim,id=bmc0 -device isa-ipmi-kcs,bmc=bmc0,ioport=0xca2

Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7ffec4268700 (LWP 7657)]
__memcpy_ssse3_back () at ../sysdeps/x86_64/multiarch/memcpy-ssse3-back.S:2757
(gdb) bt
 #0  __memcpy_ssse3_back () at ../sysdeps/x86_64/multiarch/memcpy-ssse3-back.S:2757
 #1  0x00005555559ef775 in memcpy (__len=3, __src=0xc1421c, __dest=<optimized out>)
     at /usr/include/bits/string3.h:51
 #2  qemu_put_buffer (f=0x555557a97690, buf=0xc1421c <Address 0xc1421c out of bounds>, size=3)
     at migration/qemu-file.c:346
 #3  0x00005555559eef66 in vmstate_save_state (f=f@entry=0x555557a97690,
     vmsd=0x555555f8a5a0 <vmstate_ISAIPMIKCSDevice>, opaque=0x555557231160,
     vmdesc=vmdesc@entry=0x55555798cc40) at migration/vmstate.c:333
 #4  0x00005555557cfe45 in vmstate_save (f=f@entry=0x555557a97690, se=se@entry=0x555557231de0,
     vmdesc=vmdesc@entry=0x55555798cc40) at /mnt/sdb/zyy/qemu/migration/savevm.c:720
 #5  0x00005555557d2be7 in qemu_savevm_state_complete_precopy (f=0x555557a97690,
     iterable_only=iterable_only@entry=false) at /mnt/sdb/zyy/qemu/migration/savevm.c:1128
 #6  0x00005555559ea102 in migration_completion (start_time=<synthetic pointer>,
     old_vm_running=<synthetic pointer>, current_active_state=<optimized out>,
     s=0x5555560eaa80 <current_migration.44078>) at migration/migration.c:1707
 #7  migration_thread (opaque=0x5555560eaa80 <current_migration.44078>) at migration/migration.c:1855
 #8  0x00007ffff3900dc5 in start_thread (arg=0x7ffec4268700) at pthread_create.c:308
 #9  0x00007fffefc6c71d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:113

Signed-off-by: Zhuang Yanying <ann.zhuangyanying@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-18 17:50:09 +02:00
Zhuang Yanying be4e0d7375 ivshmem: Fix 64 bit memory bar configuration
Device ivshmem property use64=0 is designed to make the device
expose a 32 bit shared memory BAR instead of 64 bit one.  The
default is a 64 bit BAR, except pc-1.2 and older retain a 32 bit
BAR.  A 32 bit BAR can support only up to 1 GiB of shared memory.

This worked as designed until commit 5400c02 accidentally flipped
its sense: since then, we misinterpret use64=0 as use64=1 and vice
versa.  Worse, the default got flipped as well.  Devices
ivshmem-plain and ivshmem-doorbell are not affected.

Fix by restoring the test of IVShmemState member not_legacy_32bit
that got messed up in commit 5400c02.  Also update its
initialization for devices ivhsmem-plain and ivshmem-doorbell.
Without that, they'd regress to 32 bit BARs.

Cc: qemu-stable@nongnu.org
Signed-off-by: Zhuang Yanying <ann.zhuangyanying@huawei.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2016-11-18 17:29:34 +02:00
Paolo Bonzini 83d768b564 virtio: set ISR on dataplane notifications
Dataplane has been omitting forever the step of setting ISR when
an interrupt is raised.  This caused little breakage, because the
specification actually says that ISR may not be updated in MSI mode.

Some versions of the Windows drivers however didn't clear MSI mode
correctly, and proceeded using polling mode (using ISR, not the used
ring index!) for crashdump and hibernation.  If it were just crashdump
and hibernation it would not be a big deal, but recent releases of
Windows do not really shut down, but rather log out and hibernate to
make the next startup faster.  Hence, this manifested as a more serious
hang during shutdown with e.g. Windows 8.1 and virtio-win 1.8.0 RPMs.
Newer versions fixed this, while older versions do not use MSI at all.

The failure has always been there for virtio dataplane, but it became
visible after commits 9ffe337 ("virtio-blk: always use dataplane path
if ioeventfd is active", 2016-10-30) and ad07cd6 ("virtio-scsi: always
use dataplane path if ioeventfd is active", 2016-10-30) made virtio-blk
and virtio-scsi always use the dataplane code under KVM.  The good news
therefore is that it was not a bug in the patches---they were doing
exactly what they were meant for, i.e. shake out remaining dataplane bugs.

The fix is not hard, so it's worth arranging for the broken drivers.
The virtio_should_notify+event_notifier_set pair that is common to
virtio-blk and virtio-scsi dataplane is replaced with a new public
function virtio_notify_irqfd that also sets ISR.  The irqfd emulation
code now need not set ISR anymore, so virtio_irq is removed.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-18 17:29:25 +02:00
Paolo Bonzini 0687c37c5e virtio: access ISR atomically
This will be needed once dataplane will be able to set it outside
the big QEMU lock.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-18 17:29:25 +02:00
Paolo Bonzini 310837de6c virtio: introduce grab/release_ioeventfd to fix vhost
Following the recent refactoring of virtio notifiers [1], more specifically
the patch ed08a2a0b ("virtio: use virtio_bus_set_host_notifier to
start/stop ioeventfd") that uses virtio_bus_set_host_notifier [2]
by default, core virtio code requires 'ioeventfd_started' to be set
to true/false when the host notifiers are configured.

When vhost is stopped and started, however, there is a stop followed by
another start. Since ioeventfd_started was never set to true, the 'stop'
operation triggered by virtio_bus_set_host_notifier() will not result
in a call to virtio_pci_ioeventfd_assign(assign=false). This leaves
the memory regions with stale notifiers and results on the next start
triggering the following assertion:

  kvm_mem_ioeventfd_add: error adding ioeventfd: File exists
  Aborted

This patch reintroduces (hopefully in a cleaner way) the concept
that was present with ioeventfd_disabled before the refactoring.
When ioeventfd_grabbed>0, ioeventfd_started tracks whether ioeventfd
should be enabled or not, but ioeventfd is actually not started at
all until vhost releases the host notifiers.

[1] http://lists.nongnu.org/archive/html/qemu-devel/2016-10/msg07748.html
[2] http://lists.nongnu.org/archive/html/qemu-devel/2016-10/msg07760.html

Reported-by: Felipe Franciosi <felipe@nutanix.com>
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Fixes: ed08a2a0b ("virtio: use virtio_bus_set_host_notifier to start/stop ioeventfd")
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Tested-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-18 17:29:25 +02:00
Stefan Hajnoczi d93b1fb009 Merge remote-tracking branch 'public/tags/tracing-pull-request' into staging
# gpg: Signature made Fri 18 Nov 2016 03:01:22 PM GMT
# gpg:                using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* public/tags/tracing-pull-request:
  trace: fix generated code build break

Message-id: 1479481289-2479-1-git-send-email-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-18 15:24:26 +00:00
Stefan Hajnoczi 600f5ce356 virtio-crypto: fix virtio_queue_set_notification() race
We must check for new virtqueue buffers after re-enabling notifications.
This prevents the race condition where the guest added buffers just
after we stopped popping the virtqueue but before we re-enabled
notifications.

I think the virtio-crypto code was based on virtio-net but this crucial
detail was missed.  virtio-net does not have the race condition because
it processes the virtqueue one more time after re-enabling
notifications.

Cc: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
2016-11-18 17:14:10 +02:00
Stefan Hajnoczi ad538782d7 Merge remote-tracking branch 'remotes/elmarco/tags/ivshmem-pull-request' into staging
* remotes/elmarco/tags/ivshmem-pull-request:
  ivshmem: Fix 64 bit memory bar configuration

Message-id: 20161117152613.18578-1-marcandre.lureau@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-18 14:58:48 +00:00
Stefan Hajnoczi e7830f8961 Merge remote-tracking branch 'rth/tags/pull-axp-20161117' into staging
Update alpha palcode for smp

# gpg: Signature made Thu 17 Nov 2016 02:57:29 PM GMT
# gpg:                using RSA key 0xAD1270CC4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"
# Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC  16A4 AD12 70CC 4DD0 279B

* rth/tags/pull-axp-20161117:
  target-alpha: Log cpuid with -d int
  target-alpha: Update palcode for smp

Message-id: 1479394965-11254-1-git-send-email-rth@twiddle.net
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-18 14:49:02 +00:00
Greg Kurz d4f7ca5901 trace: fix generated code build break
If the QEMU source dir is

    /var/tmp/aaa-qemu-clone

and the build dir is

    /var/tmp/qemu-aio-poll-v2

Then I get an error as:

trace/generated-tracers.c:15950:13: error: invalid suffix "_trace_events"
 on integer constant
 TraceEvent *2_trace_events[] = {
             ^
trace/generated-tracers.c:15950:13: error: expected identifier or ‘(’ before
 numeric constant
trace/generated-tracers.c: In function ‘trace_2_register_events’:
trace/generated-tracers.c:17949:32: error: invalid suffix "_trace_events" on
 integer constant
     trace_event_register_group(2_trace_events);
                                ^
make: *** [trace/generated-tracers.o] Error 1

This patch fixes the issue.

Reported-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Tested-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-18 11:09:58 +00:00
Stefan Hajnoczi 363effe28b Merge remote-tracking branch 'vivier/tags/trivial-patches-pull-request' into staging
# gpg: Signature made Thu 17 Nov 2016 10:18:58 AM GMT
# gpg:                using RSA key 0xF30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>"
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* vivier/tags/trivial-patches-pull-request:
  qapi-schema: clarify 'colo' state for MigrationStatus

Message-id: 1479378016-19022-1-git-send-email-laurent@vivier.eu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-18 11:05:48 +00:00
Richard Henderson 022f52e040 target-alpha: Log cpuid with -d int
Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-11-17 15:56:31 +01:00
Richard Henderson dfbd2768b2 target-alpha: Update palcode for smp
Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-11-17 15:56:31 +01:00
Zhuang Yanying b2b79a6960 ivshmem: Fix 64 bit memory bar configuration
Device ivshmem property use64=0 is designed to make the device
expose a 32 bit shared memory BAR instead of 64 bit one.  The
default is a 64 bit BAR, except pc-1.2 and older retain a 32 bit
BAR.  A 32 bit BAR can support only up to 1 GiB of shared memory.

This worked as designed until commit 5400c02 accidentally flipped
its sense: since then, we misinterpret use64=0 as use64=1 and vice
versa.  Worse, the default got flipped as well.  Devices
ivshmem-plain and ivshmem-doorbell are not affected.

Fix by restoring the test of IVShmemState member not_legacy_32bit
that got messed up in commit 5400c02.  Also update its
initialization for devices ivhsmem-plain and ivshmem-doorbell.
Without that, they'd regress to 32 bit BARs.

Signed-off-by: Zhuang Yanying <ann.zhuangyanying@huawei.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1479385863-7648-1-git-send-email-ann.zhuangyanying@huawei.com>
2016-11-17 18:39:59 +04:00
zhanghailiang 252093a726 qapi-schema: clarify 'colo' state for MigrationStatus
VM can not get into colo state unless users enable 'x-colo'
capability for migration, Here it is necessary to clarify
this.

Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-Id: <1478072652-9884-1-git-send-email-zhang.zhanghailiang@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2016-11-17 08:52:47 +01:00
Igor Mammedov e3cadac073 pc: fix FW_CFG_NB_CPUS to account for -device added CPUs
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1479301481-197333-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-11-16 12:10:00 -02:00
Igor Mammedov 5836d16812 fw_cfg: move FW_CFG_NB_CPUS out of fw_cfg_init1()
PC will use this field in other way, so move it outside the common
code so PC could set a different value, i.e. all CPUs
regardless of where they are coming from (-smp X | -device cpu...).

It's quick and dirty hack as it could be implemented in more generic
way in MashineClass. But do it in simple way since only PC is affected
so far.

Later we can generalize it when another affected target gets support
for -device cpu.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1479212236-183810-3-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-11-16 12:09:58 -02:00
Igor Mammedov eabff15820 Revert "pc: Add 'etc/boot-cpus' fw_cfg file for machine with more than 255 CPUs"
This reverts commit 080ac219cc.

Legacy FW_CFG_NB_CPUS will be reused instead of 'etc/boot-cpus'
fw_cfg file since it does the same and there is no point
to maintaing duplicate guest ABI, if it can be helped.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1479212236-183810-2-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-11-16 12:09:53 -02:00
Anthony PERARD 804ba7c10b xen: Fix xenpv machine initialisation
When using QEMU for Xen PV guest, QEMU abort with:
xen-common.c:118:xen_init: Object 0x7f2b8325dcb0 is not an instance of type generic-pc-machine

This is because the machine 'xenpv' also use accel=xen. Moving the code
to xen_hvm_init() fix the issue.

This fix 021746c131.

Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2016-11-08 11:17:30 -08:00
195 changed files with 3409 additions and 2200 deletions

No files matched your search

+1 -1
View File
@@ -1 +1 @@
2.7.90
2.8.1.1
+21 -20
View File
@@ -48,7 +48,7 @@ typedef struct BDRVGlusterState {
struct glfs_fd *fd;
char *logfile;
bool supports_seek_data;
int debug_level;
int debug;
} BDRVGlusterState;
typedef struct BDRVGlusterReopenState {
@@ -239,12 +239,13 @@ static glfs_t *glfs_find_preopened(const char *volume)
static void glfs_clear_preopened(glfs_t *fs)
{
ListElement *entry = NULL;
ListElement *next;
if (fs == NULL) {
return;
}
QLIST_FOREACH(entry, &glfs_list, list) {
QLIST_FOREACH_SAFE(entry, &glfs_list, list, next) {
if (entry->saved.fs == fs) {
if (--entry->saved.ref) {
return;
@@ -433,7 +434,7 @@ static struct glfs *qemu_gluster_glfs_init(BlockdevOptionsGluster *gconf,
}
}
ret = glfs_set_logging(glfs, gconf->logfile, gconf->debug_level);
ret = glfs_set_logging(glfs, gconf->logfile, gconf->debug);
if (ret < 0) {
goto out;
}
@@ -787,17 +788,17 @@ static int qemu_gluster_open(BlockDriverState *bs, QDict *options,
filename = qemu_opt_get(opts, GLUSTER_OPT_FILENAME);
s->debug_level = qemu_opt_get_number(opts, GLUSTER_OPT_DEBUG,
GLUSTER_DEBUG_DEFAULT);
if (s->debug_level < 0) {
s->debug_level = 0;
} else if (s->debug_level > GLUSTER_DEBUG_MAX) {
s->debug_level = GLUSTER_DEBUG_MAX;
s->debug = qemu_opt_get_number(opts, GLUSTER_OPT_DEBUG,
GLUSTER_DEBUG_DEFAULT);
if (s->debug < 0) {
s->debug = 0;
} else if (s->debug > GLUSTER_DEBUG_MAX) {
s->debug = GLUSTER_DEBUG_MAX;
}
gconf = g_new0(BlockdevOptionsGluster, 1);
gconf->debug_level = s->debug_level;
gconf->has_debug_level = true;
gconf->debug = s->debug;
gconf->has_debug = true;
logfile = qemu_opt_get(opts, GLUSTER_OPT_LOGFILE);
s->logfile = g_strdup(logfile ? logfile : GLUSTER_LOGFILE_DEFAULT);
@@ -873,8 +874,8 @@ static int qemu_gluster_reopen_prepare(BDRVReopenState *state,
qemu_gluster_parse_flags(state->flags, &open_flags);
gconf = g_new0(BlockdevOptionsGluster, 1);
gconf->debug_level = s->debug_level;
gconf->has_debug_level = true;
gconf->debug = s->debug;
gconf->has_debug = true;
gconf->logfile = g_strdup(s->logfile);
gconf->has_logfile = true;
reop_s->glfs = qemu_gluster_init(gconf, state->bs->filename, NULL, errp);
@@ -1010,14 +1011,14 @@ static int qemu_gluster_create(const char *filename,
char *tmp = NULL;
gconf = g_new0(BlockdevOptionsGluster, 1);
gconf->debug_level = qemu_opt_get_number_del(opts, GLUSTER_OPT_DEBUG,
GLUSTER_DEBUG_DEFAULT);
if (gconf->debug_level < 0) {
gconf->debug_level = 0;
} else if (gconf->debug_level > GLUSTER_DEBUG_MAX) {
gconf->debug_level = GLUSTER_DEBUG_MAX;
gconf->debug = qemu_opt_get_number_del(opts, GLUSTER_OPT_DEBUG,
GLUSTER_DEBUG_DEFAULT);
if (gconf->debug < 0) {
gconf->debug = 0;
} else if (gconf->debug > GLUSTER_DEBUG_MAX) {
gconf->debug = GLUSTER_DEBUG_MAX;
}
gconf->has_debug_level = true;
gconf->has_debug = true;
gconf->logfile = qemu_opt_get_del(opts, GLUSTER_OPT_LOGFILE);
if (!gconf->logfile) {
+40 -18
View File
@@ -1214,6 +1214,8 @@ static int coroutine_fn bdrv_co_do_pwrite_zeroes(BlockDriverState *bs,
int max_write_zeroes = MIN_NON_ZERO(bs->bl.max_pwrite_zeroes, INT_MAX);
int alignment = MAX(bs->bl.pwrite_zeroes_alignment,
bs->bl.request_alignment);
int max_transfer = MIN_NON_ZERO(bs->bl.max_transfer,
MAX_WRITE_ZEROES_BOUNCE_BUFFER);
assert(alignment % bs->bl.request_alignment == 0);
head = offset % alignment;
@@ -1229,9 +1231,12 @@ static int coroutine_fn bdrv_co_do_pwrite_zeroes(BlockDriverState *bs,
* boundaries.
*/
if (head) {
/* Make a small request up to the first aligned sector. */
num = MIN(count, alignment - head);
head = 0;
/* Make a small request up to the first aligned sector. For
* convenience, limit this request to max_transfer even if
* we don't need to fall back to writes. */
num = MIN(MIN(count, max_transfer), alignment - head);
head = (head + num) % alignment;
assert(num < max_write_zeroes);
} else if (tail && num > alignment) {
/* Shorten the request to the last aligned sector. */
num -= tail;
@@ -1257,8 +1262,6 @@ static int coroutine_fn bdrv_co_do_pwrite_zeroes(BlockDriverState *bs,
if (ret == -ENOTSUP) {
/* Fall back to bounce buffer if write zeroes is unsupported */
int max_transfer = MIN_NON_ZERO(bs->bl.max_transfer,
MAX_WRITE_ZEROES_BOUNCE_BUFFER);
BdrvRequestFlags write_flags = flags & ~BDRV_REQ_ZERO_WRITE;
if ((flags & BDRV_REQ_FUA) &&
@@ -2421,7 +2424,7 @@ int coroutine_fn bdrv_co_pdiscard(BlockDriverState *bs, int64_t offset,
{
BdrvTrackedRequest req;
int max_pdiscard, ret;
int head, align;
int head, tail, align;
if (!bs->drv) {
return -ENOMEDIUM;
@@ -2444,19 +2447,15 @@ int coroutine_fn bdrv_co_pdiscard(BlockDriverState *bs, int64_t offset,
return 0;
}
/* Discard is advisory, so ignore any unaligned head or tail */
/* Discard is advisory, but some devices track and coalesce
* unaligned requests, so we must pass everything down rather than
* round here. Still, most devices will just silently ignore
* unaligned requests (by returning -ENOTSUP), so we must fragment
* the request accordingly. */
align = MAX(bs->bl.pdiscard_alignment, bs->bl.request_alignment);
assert(align % bs->bl.request_alignment == 0);
head = offset % align;
if (head) {
head = MIN(count, align - head);
count -= head;
offset += head;
}
count = QEMU_ALIGN_DOWN(count, align);
if (!count) {
return 0;
}
tail = (offset + count) % align;
bdrv_inc_in_flight(bs);
tracked_request_begin(&req, bs, offset, count, BDRV_TRACKED_DISCARD);
@@ -2468,11 +2467,34 @@ int coroutine_fn bdrv_co_pdiscard(BlockDriverState *bs, int64_t offset,
max_pdiscard = QEMU_ALIGN_DOWN(MIN_NON_ZERO(bs->bl.max_pdiscard, INT_MAX),
align);
assert(max_pdiscard);
assert(max_pdiscard >= bs->bl.request_alignment);
while (count > 0) {
int ret;
int num = MIN(count, max_pdiscard);
int num = count;
if (head) {
/* Make small requests to get to alignment boundaries. */
num = MIN(count, align - head);
if (!QEMU_IS_ALIGNED(num, bs->bl.request_alignment)) {
num %= bs->bl.request_alignment;
}
head = (head + num) % align;
assert(num < max_pdiscard);
} else if (tail) {
if (num > align) {
/* Shorten the request to the last aligned cluster. */
num -= tail;
} else if (!QEMU_IS_ALIGNED(tail, bs->bl.request_alignment) &&
tail > bs->bl.request_alignment) {
tail %= bs->bl.request_alignment;
num -= tail;
}
}
/* limit request size */
if (num > max_pdiscard) {
num = max_pdiscard;
}
if (bs->drv->bdrv_co_pdiscard) {
ret = bs->drv->bdrv_co_pdiscard(bs, offset, num);
+9 -3
View File
@@ -498,14 +498,18 @@ iscsi_allocmap_update(IscsiLun *iscsilun, int64_t sector_num,
if (allocated) {
bitmap_set(iscsilun->allocmap, cl_num_expanded, nb_cls_expanded);
} else {
bitmap_clear(iscsilun->allocmap, cl_num_shrunk, nb_cls_shrunk);
if (nb_cls_shrunk > 0) {
bitmap_clear(iscsilun->allocmap, cl_num_shrunk, nb_cls_shrunk);
}
}
if (iscsilun->allocmap_valid == NULL) {
return;
}
if (valid) {
bitmap_set(iscsilun->allocmap_valid, cl_num_shrunk, nb_cls_shrunk);
if (nb_cls_shrunk > 0) {
bitmap_set(iscsilun->allocmap_valid, cl_num_shrunk, nb_cls_shrunk);
}
} else {
bitmap_clear(iscsilun->allocmap_valid, cl_num_expanded,
nb_cls_expanded);
@@ -1083,7 +1087,9 @@ coroutine_fn iscsi_co_pdiscard(BlockDriverState *bs, int64_t offset, int count)
struct IscsiTask iTask;
struct unmap_list list;
assert(is_byte_request_lun_aligned(offset, count, iscsilun));
if (!is_byte_request_lun_aligned(offset, count, iscsilun)) {
return -ENOTSUP;
}
if (!iscsilun->lbp.lbpu) {
/* UNMAP is not supported by the target */
+4
View File
@@ -415,6 +415,10 @@ int nbd_client_init(BlockDriverState *bs,
}
if (client->nbdflags & NBD_FLAG_SEND_FUA) {
bs->supported_write_flags = BDRV_REQ_FUA;
bs->supported_zero_flags |= BDRV_REQ_FUA;
}
if (client->nbdflags & NBD_FLAG_SEND_WRITE_ZEROES) {
bs->supported_zero_flags |= BDRV_REQ_MAY_UNMAP;
}
qemu_co_mutex_init(&client->send_mutex);
+27 -26
View File
@@ -108,12 +108,13 @@ static int nfs_parse_uri(const char *filename, QDict *options, Error **errp)
qdict_put(options, "path", qstring_from_str(uri->path));
for (i = 0; i < qp->n; i++) {
unsigned long long val;
if (!qp->p[i].value) {
error_setg(errp, "Value for NFS parameter expected: %s",
qp->p[i].name);
goto out;
}
if (parse_uint_full(qp->p[i].value, NULL, 0)) {
if (parse_uint_full(qp->p[i].value, &val, 0)) {
error_setg(errp, "Illegal value for NFS parameter: %s",
qp->p[i].name);
goto out;
@@ -134,7 +135,7 @@ static int nfs_parse_uri(const char *filename, QDict *options, Error **errp)
qdict_put(options, "page-cache-size",
qstring_from_str(qp->p[i].value));
} else if (!strcmp(qp->p[i].name, "debug")) {
qdict_put(options, "debug-level",
qdict_put(options, "debug",
qstring_from_str(qp->p[i].value));
} else {
error_setg(errp, "Unknown NFS parameter name: %s",
@@ -165,7 +166,7 @@ static bool nfs_has_filename_options_conflict(QDict *options, Error **errp)
!strcmp(qe->key, "tcp-syn-count") ||
!strcmp(qe->key, "readahead-size") ||
!strcmp(qe->key, "page-cache-size") ||
!strcmp(qe->key, "debug-level") ||
!strcmp(qe->key, "debug") ||
strstart(qe->key, "server.", NULL))
{
error_setg(errp, "Option %s cannot be used with a filename",
@@ -357,27 +358,27 @@ static QemuOptsList runtime_opts = {
.help = "Path of the image on the host",
},
{
.name = "uid",
.name = "user",
.type = QEMU_OPT_NUMBER,
.help = "UID value to use when talking to the server",
},
{
.name = "gid",
.name = "group",
.type = QEMU_OPT_NUMBER,
.help = "GID value to use when talking to the server",
},
{
.name = "tcp-syncnt",
.name = "tcp-syn-count",
.type = QEMU_OPT_NUMBER,
.help = "Number of SYNs to send during the session establish",
},
{
.name = "readahead",
.name = "readahead-size",
.type = QEMU_OPT_NUMBER,
.help = "Set the readahead size in bytes",
},
{
.name = "pagecache",
.name = "page-cache-size",
.type = QEMU_OPT_NUMBER,
.help = "Set the pagecache size in bytes",
},
@@ -506,29 +507,29 @@ static int64_t nfs_client_open(NFSClient *client, QDict *options,
goto fail;
}
if (qemu_opt_get(opts, "uid")) {
client->uid = qemu_opt_get_number(opts, "uid", 0);
if (qemu_opt_get(opts, "user")) {
client->uid = qemu_opt_get_number(opts, "user", 0);
nfs_set_uid(client->context, client->uid);
}
if (qemu_opt_get(opts, "gid")) {
client->gid = qemu_opt_get_number(opts, "gid", 0);
if (qemu_opt_get(opts, "group")) {
client->gid = qemu_opt_get_number(opts, "group", 0);
nfs_set_gid(client->context, client->gid);
}
if (qemu_opt_get(opts, "tcp-syncnt")) {
client->tcp_syncnt = qemu_opt_get_number(opts, "tcp-syncnt", 0);
if (qemu_opt_get(opts, "tcp-syn-count")) {
client->tcp_syncnt = qemu_opt_get_number(opts, "tcp-syn-count", 0);
nfs_set_tcp_syncnt(client->context, client->tcp_syncnt);
}
#ifdef LIBNFS_FEATURE_READAHEAD
if (qemu_opt_get(opts, "readahead")) {
if (qemu_opt_get(opts, "readahead-size")) {
if (open_flags & BDRV_O_NOCACHE) {
error_setg(errp, "Cannot enable NFS readahead "
"if cache.direct = on");
goto fail;
}
client->readahead = qemu_opt_get_number(opts, "readahead", 0);
client->readahead = qemu_opt_get_number(opts, "readahead-size", 0);
if (client->readahead > QEMU_NFS_MAX_READAHEAD_SIZE) {
error_report("NFS Warning: Truncating NFS readahead "
"size to %d", QEMU_NFS_MAX_READAHEAD_SIZE);
@@ -543,13 +544,13 @@ static int64_t nfs_client_open(NFSClient *client, QDict *options,
#endif
#ifdef LIBNFS_FEATURE_PAGECACHE
if (qemu_opt_get(opts, "pagecache")) {
if (qemu_opt_get(opts, "page-cache-size")) {
if (open_flags & BDRV_O_NOCACHE) {
error_setg(errp, "Cannot enable NFS pagecache "
"if cache.direct = on");
goto fail;
}
client->pagecache = qemu_opt_get_number(opts, "pagecache", 0);
client->pagecache = qemu_opt_get_number(opts, "page-cache-size", 0);
if (client->pagecache > QEMU_NFS_MAX_PAGECACHE_SIZE) {
error_report("NFS Warning: Truncating NFS pagecache "
"size to %d pages", QEMU_NFS_MAX_PAGECACHE_SIZE);
@@ -802,22 +803,22 @@ static void nfs_refresh_filename(BlockDriverState *bs, QDict *options)
qdict_put(opts, "path", qstring_from_str(client->path));
if (client->uid) {
qdict_put(opts, "uid", qint_from_int(client->uid));
qdict_put(opts, "user", qint_from_int(client->uid));
}
if (client->gid) {
qdict_put(opts, "gid", qint_from_int(client->gid));
qdict_put(opts, "group", qint_from_int(client->gid));
}
if (client->tcp_syncnt) {
qdict_put(opts, "tcp-syncnt",
qint_from_int(client->tcp_syncnt));
qdict_put(opts, "tcp-syn-cnt",
qint_from_int(client->tcp_syncnt));
}
if (client->readahead) {
qdict_put(opts, "readahead",
qint_from_int(client->readahead));
qdict_put(opts, "readahead-size",
qint_from_int(client->readahead));
}
if (client->pagecache) {
qdict_put(opts, "pagecache",
qint_from_int(client->pagecache));
qdict_put(opts, "page-cache-size",
qint_from_int(client->pagecache));
}
if (client->debug) {
qdict_put(opts, "debug", qint_from_int(client->debug));
+3 -3
View File
@@ -22,7 +22,6 @@
* THE SOFTWARE.
*/
/* Needed for CONFIG_MADVISE */
#include "qemu/osdep.h"
#include "block/block_int.h"
#include "qemu-common.h"
@@ -66,7 +65,8 @@ static inline int qcow2_cache_get_table_idx(BlockDriverState *bs,
static void qcow2_cache_table_release(BlockDriverState *bs, Qcow2Cache *c,
int i, int num_tables)
{
#if QEMU_MADV_DONTNEED != QEMU_MADV_INVALID
/* Using MADV_DONTNEED to discard memory is a Linux-specific feature */
#ifdef CONFIG_LINUX
BDRVQcow2State *s = bs->opaque;
void *t = qcow2_cache_get_table_addr(bs, c, i);
int align = getpagesize();
@@ -74,7 +74,7 @@ static void qcow2_cache_table_release(BlockDriverState *bs, Qcow2Cache *c,
size_t offset = QEMU_ALIGN_UP((uintptr_t) t, align) - (uintptr_t) t;
size_t length = QEMU_ALIGN_DOWN(mem_size - offset, align);
if (length > 0) {
qemu_madvise((uint8_t *) t + offset, length, QEMU_MADV_DONTNEED);
madvise((uint8_t *) t + offset, length, MADV_DONTNEED);
}
#endif
}
+16 -1
View File
@@ -668,6 +668,14 @@ static int qcow2_update_options_prepare(BlockDriverState *bs,
r->cache_clean_interval =
qemu_opt_get_number(opts, QCOW2_OPT_CACHE_CLEAN_INTERVAL,
s->cache_clean_interval);
#ifndef CONFIG_LINUX
if (r->cache_clean_interval != 0) {
error_setg(errp, QCOW2_OPT_CACHE_CLEAN_INTERVAL
" not supported on this host");
ret = -EINVAL;
goto fail;
}
#endif
if (r->cache_clean_interval > UINT_MAX) {
error_setg(errp, "Cache clean interval too big");
ret = -EINVAL;
@@ -1206,6 +1214,7 @@ static void qcow2_refresh_limits(BlockDriverState *bs, Error **errp)
bs->bl.request_alignment = BDRV_SECTOR_SIZE;
}
bs->bl.pwrite_zeroes_alignment = s->cluster_size;
bs->bl.pdiscard_alignment = s->cluster_size;
}
static int qcow2_set_key(BlockDriverState *bs, const char *key)
@@ -2490,6 +2499,11 @@ static coroutine_fn int qcow2_co_pdiscard(BlockDriverState *bs,
int ret;
BDRVQcow2State *s = bs->opaque;
if (!QEMU_IS_ALIGNED(offset | count, s->cluster_size)) {
assert(count < s->cluster_size);
return -ENOTSUP;
}
qemu_co_mutex_lock(&s->lock);
ret = qcow2_discard_clusters(bs, offset, count >> BDRV_SECTOR_BITS,
QCOW2_DISCARD_REQUEST, false);
@@ -2794,7 +2808,8 @@ static int qcow2_make_empty(BlockDriverState *bs)
{
BDRVQcow2State *s = bs->opaque;
uint64_t start_sector;
int sector_step = INT_MAX / BDRV_SECTOR_SIZE;
int sector_step = (QEMU_ALIGN_DOWN(INT_MAX, s->cluster_size) /
BDRV_SECTOR_SIZE);
int l1_clusters, ret = 0;
l1_clusters = DIV_ROUND_UP(s->l1_size, s->cluster_size / sizeof(uint64_t));
+3 -2
View File
@@ -2829,8 +2829,9 @@ static coroutine_fn int sd_co_pdiscard(BlockDriverState *bs, int64_t offset,
iov.iov_len = sizeof(zero);
discard_iov.iov = &iov;
discard_iov.niov = 1;
assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
assert((count & (BDRV_SECTOR_SIZE - 1)) == 0);
if (!QEMU_IS_ALIGNED(offset | count, BDRV_SECTOR_SIZE)) {
return -ENOTSUP;
}
acb = sd_aio_setup(bs, &discard_iov, offset >> BDRV_SECTOR_BITS,
count >> BDRV_SECTOR_BITS);
acb->aiocb_type = AIOCB_DISCARD_OBJ;
+2 -2
View File
@@ -1354,8 +1354,8 @@ static int vmdk_write_extent(VmdkExtent *extent, int64_t cluster_offset,
goto out;
}
data->lba = offset >> BDRV_SECTOR_BITS;
data->size = buf_len;
data->lba = cpu_to_le64(offset >> BDRV_SECTOR_BITS);
data->size = cpu_to_le32(buf_len);
n_bytes = buf_len + sizeof(VmdkGrainMarker);
iov = (struct iovec) {
Vendored
+12 -4
View File
@@ -582,6 +582,8 @@ FreeBSD)
audio_possible_drivers="oss sdl pa"
# needed for kinfo_getvmmap(3) in libutil.h
LIBS="-lutil $LIBS"
# needed for kinfo_getproc
libs_qga="-lutil $libs_qga"
netmap="" # enable netmap autodetect
HOST_VARIANT_DIR="freebsd"
;;
@@ -4303,11 +4305,11 @@ if have_backend "ust"; then
#include <lttng/tracepoint.h>
int main(void) { return 0; }
EOF
if compile_prog "" "" ; then
if compile_prog "" "-Wl,--no-as-needed -ldl" ; then
if $pkg_config lttng-ust --exists; then
lttng_ust_libs=$($pkg_config --libs lttng-ust)
else
lttng_ust_libs="-llttng-ust"
lttng_ust_libs="-llttng-ust -ldl"
fi
if $pkg_config liburcu-bp --exists; then
urcu_bp_libs=$($pkg_config --libs liburcu-bp)
@@ -4721,8 +4723,14 @@ EOF
if ! compile_object ""; then
error_exit "Failed to compile object file for LD_REL_FLAGS test"
fi
if do_cc -nostdlib -Wl,-r -Wl,--no-relax -o $TMPMO $TMPO; then
LD_REL_FLAGS="-Wl,--no-relax"
for i in '-Wl,-r -Wl,--no-relax' -Wl,-r -r; do
if do_cc -nostdlib $i -o $TMPMO $TMPO; then
LD_REL_FLAGS=$i
break
fi
done
if test "$modules" = "yes" && test "$LD_REL_FLAGS" = ""; then
feature_not_found "modules" "Cannot find how to build relocatable objects"
fi
##########################################
+5 -4
View File
@@ -491,7 +491,7 @@ static inline void cpu_handle_interrupt(CPUState *cpu,
X86CPU *x86_cpu = X86_CPU(cpu);
CPUArchState *env = &x86_cpu->env;
replay_interrupt();
cpu_svm_check_intercept_param(env, SVM_EXIT_INIT, 0);
cpu_svm_check_intercept_param(env, SVM_EXIT_INIT, 0, 0);
do_cpu_init(x86_cpu);
cpu->exception_index = EXCP_HALTED;
cpu_loop_exit(cpu);
@@ -542,7 +542,7 @@ static inline void cpu_loop_exec_tb(CPUState *cpu, TranslationBlock *tb,
trace_exec_tb(tb, tb->pc);
ret = cpu_tb_exec(cpu, tb);
*last_tb = (TranslationBlock *)(ret & ~TB_EXIT_MASK);
tb = (TranslationBlock *)(ret & ~TB_EXIT_MASK);
*tb_exit = ret & TB_EXIT_MASK;
switch (*tb_exit) {
case TB_EXIT_REQUESTED:
@@ -566,6 +566,7 @@ static inline void cpu_loop_exec_tb(CPUState *cpu, TranslationBlock *tb,
abort();
#else
int insns_left = cpu->icount_decr.u32;
*last_tb = NULL;
if (cpu->icount_extra && insns_left >= 0) {
/* Refill decrementer and continue execution. */
cpu->icount_extra += insns_left;
@@ -575,17 +576,17 @@ static inline void cpu_loop_exec_tb(CPUState *cpu, TranslationBlock *tb,
} else {
if (insns_left > 0) {
/* Execute remaining instructions. */
cpu_exec_nocache(cpu, insns_left, *last_tb, false);
cpu_exec_nocache(cpu, insns_left, tb, false);
align_clocks(sc, cpu);
}
cpu->exception_index = EXCP_INTERRUPT;
*last_tb = NULL;
cpu_loop_exit(cpu);
}
break;
#endif
}
default:
*last_tb = tb;
break;
}
}
+3 -2
View File
@@ -160,5 +160,6 @@ If unset, the default value for this parameter is 0 and it disables
this feature.
Note that this functionality currently relies on the MADV_DONTNEED
argument for madvise() to actually free the memory, so it is not
useful in systems that don't follow that behavior.
argument for madvise() to actually free the memory. This is a
Linux-specific feature, so cache-clean-interval is not supported in
other systems.
+10 -10
View File
@@ -123,22 +123,22 @@ The communication consists of master sending message requests and slave sending
message replies. Most of the requests don't require replies. Here is a list of
the ones that do:
* VHOST_GET_FEATURES
* VHOST_GET_PROTOCOL_FEATURES
* VHOST_GET_VRING_BASE
* VHOST_SET_LOG_BASE (if VHOST_USER_PROTOCOL_F_LOG_SHMFD)
* VHOST_USER_GET_FEATURES
* VHOST_USER_GET_PROTOCOL_FEATURES
* VHOST_USER_GET_VRING_BASE
* VHOST_USER_SET_LOG_BASE (if VHOST_USER_PROTOCOL_F_LOG_SHMFD)
[ Also see the section on REPLY_ACK protocol extension. ]
There are several messages that the master sends with file descriptors passed
in the ancillary data:
* VHOST_SET_MEM_TABLE
* VHOST_SET_LOG_BASE (if VHOST_USER_PROTOCOL_F_LOG_SHMFD)
* VHOST_SET_LOG_FD
* VHOST_SET_VRING_KICK
* VHOST_SET_VRING_CALL
* VHOST_SET_VRING_ERR
* VHOST_USER_SET_MEM_TABLE
* VHOST_USER_SET_LOG_BASE (if VHOST_USER_PROTOCOL_F_LOG_SHMFD)
* VHOST_USER_SET_LOG_FD
* VHOST_USER_SET_VRING_KICK
* VHOST_USER_SET_VRING_CALL
* VHOST_USER_SET_VRING_ERR
If Master is unable to send the full message or receives a wrong reply it will
close the connection. An optional reconnection mechanism can be implemented.
+7 -19
View File
@@ -684,28 +684,15 @@ void cpu_exec_realizefn(CPUState *cpu, Error **errp)
#endif
}
#if defined(CONFIG_USER_ONLY)
static void breakpoint_invalidate(CPUState *cpu, target_ulong pc)
{
mmap_lock();
tb_lock();
tb_invalidate_phys_page_range(pc, pc + 1, 0);
tb_unlock();
mmap_unlock();
/* Flush the whole TB as this will not have race conditions
* even if we don't have proper locking yet.
* Ideally we would just invalidate the TBs for the
* specified PC.
*/
tb_flush(cpu);
}
#else
static void breakpoint_invalidate(CPUState *cpu, target_ulong pc)
{
MemTxAttrs attrs;
hwaddr phys = cpu_get_phys_page_attrs_debug(cpu, pc, &attrs);
int asidx = cpu_asidx_from_attrs(cpu, attrs);
if (phys != -1) {
/* Locks grabbed by tb_invalidate_phys_addr */
tb_invalidate_phys_addr(cpu->cpu_ases[asidx].as,
phys | (pc & ~TARGET_PAGE_MASK));
}
}
#endif
#if defined(CONFIG_USER_ONLY)
void cpu_watchpoint_remove_all(CPUState *cpu, int mask)
@@ -2940,6 +2927,7 @@ bool address_space_access_valid(AddressSpace *as, hwaddr addr, int len, bool is_
if (!memory_access_is_direct(mr, is_write)) {
l = memory_access_size(mr, l, addr);
if (!memory_region_access_valid(mr, xlat, l, is_write)) {
rcu_read_unlock();
return false;
}
}
+1
View File
@@ -100,6 +100,7 @@ struct FileOperations
{
int (*parse_opts)(QemuOpts *, struct FsDriverEntry *);
int (*init)(struct FsContext *);
void (*cleanup)(struct FsContext *);
int (*lstat)(FsContext *, V9fsPath *, struct stat *);
ssize_t (*readlink)(FsContext *, V9fsPath *, char *, size_t);
int (*chmod)(FsContext *, V9fsPath *, FsCred *);
+2 -4
View File
@@ -1551,6 +1551,7 @@ void hmp_block_set_io_throttle(Monitor *mon, const QDict *qdict)
{
Error *err = NULL;
BlockIOThrottle throttle = {
.has_device = true,
.device = (char *) qdict_get_str(qdict, "device"),
.bps = qdict_get_int(qdict, "bps"),
.bps_rd = qdict_get_int(qdict, "bps_rd"),
@@ -1808,7 +1809,6 @@ void hmp_object_add(Monitor *mon, const QDict *qdict)
{
Error *err = NULL;
QemuOpts *opts;
Visitor *v;
Object *obj = NULL;
opts = qemu_opts_from_qdict(qemu_find_opts("object"), qdict, &err);
@@ -1817,9 +1817,7 @@ void hmp_object_add(Monitor *mon, const QDict *qdict)
return;
}
v = opts_visitor_new(opts);
obj = user_creatable_add(qdict, v, &err);
visit_free(v);
obj = user_creatable_add_opts(opts, &err);
qemu_opts_del(opts);
if (err) {
+9
View File
@@ -649,6 +649,14 @@ out:
return ret;
}
static void handle_cleanup(FsContext *ctx)
{
struct handle_data *data = ctx->private;
close(data->mountfd);
g_free(data);
}
static int handle_parse_opts(QemuOpts *opts, struct FsDriverEntry *fse)
{
const char *sec_model = qemu_opt_get(opts, "security_model");
@@ -671,6 +679,7 @@ static int handle_parse_opts(QemuOpts *opts, struct FsDriverEntry *fse)
FileOperations handle_ops = {
.parse_opts = handle_parse_opts,
.init = handle_init,
.cleanup = handle_cleanup,
.lstat = handle_lstat,
.readlink = handle_readlink,
.close = handle_close,
+570 -470
View File
File diff suppressed because it is too large. Load diff
+20
View File
@@ -0,0 +1,20 @@
/*
* 9p local backend utilities
*
* Copyright IBM, Corp. 2017
*
* Authors:
* Greg Kurz <groug@kaod.org>
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#ifndef QEMU_9P_LOCAL_H
#define QEMU_9P_LOCAL_H
int local_open_nofollow(FsContext *fs_ctx, const char *path, int flags,
mode_t mode);
int local_opendir_nofollow(FsContext *fs_ctx, const char *path);
#endif
+8 -36
View File
@@ -25,13 +25,7 @@
static ssize_t mp_pacl_getxattr(FsContext *ctx, const char *path,
const char *name, void *value, size_t size)
{
char *buffer;
ssize_t ret;
buffer = rpath(ctx, path);
ret = lgetxattr(buffer, MAP_ACL_ACCESS, value, size);
g_free(buffer);
return ret;
return local_getxattr_nofollow(ctx, path, MAP_ACL_ACCESS, value, size);
}
static ssize_t mp_pacl_listxattr(FsContext *ctx, const char *path,
@@ -56,23 +50,16 @@ static ssize_t mp_pacl_listxattr(FsContext *ctx, const char *path,
static int mp_pacl_setxattr(FsContext *ctx, const char *path, const char *name,
void *value, size_t size, int flags)
{
char *buffer;
int ret;
buffer = rpath(ctx, path);
ret = lsetxattr(buffer, MAP_ACL_ACCESS, value, size, flags);
g_free(buffer);
return ret;
return local_setxattr_nofollow(ctx, path, MAP_ACL_ACCESS, value, size,
flags);
}
static int mp_pacl_removexattr(FsContext *ctx,
const char *path, const char *name)
{
int ret;
char *buffer;
buffer = rpath(ctx, path);
ret = lremovexattr(buffer, MAP_ACL_ACCESS);
ret = local_removexattr_nofollow(ctx, path, MAP_ACL_ACCESS);
if (ret == -1 && errno == ENODATA) {
/*
* We don't get ENODATA error when trying to remove a
@@ -82,20 +69,13 @@ static int mp_pacl_removexattr(FsContext *ctx,
errno = 0;
ret = 0;
}
g_free(buffer);
return ret;
}
static ssize_t mp_dacl_getxattr(FsContext *ctx, const char *path,
const char *name, void *value, size_t size)
{
char *buffer;
ssize_t ret;
buffer = rpath(ctx, path);
ret = lgetxattr(buffer, MAP_ACL_DEFAULT, value, size);
g_free(buffer);
return ret;
return local_getxattr_nofollow(ctx, path, MAP_ACL_DEFAULT, value, size);
}
static ssize_t mp_dacl_listxattr(FsContext *ctx, const char *path,
@@ -120,23 +100,16 @@ static ssize_t mp_dacl_listxattr(FsContext *ctx, const char *path,
static int mp_dacl_setxattr(FsContext *ctx, const char *path, const char *name,
void *value, size_t size, int flags)
{
char *buffer;
int ret;
buffer = rpath(ctx, path);
ret = lsetxattr(buffer, MAP_ACL_DEFAULT, value, size, flags);
g_free(buffer);
return ret;
return local_setxattr_nofollow(ctx, path, MAP_ACL_DEFAULT, value, size,
flags);
}
static int mp_dacl_removexattr(FsContext *ctx,
const char *path, const char *name)
{
int ret;
char *buffer;
buffer = rpath(ctx, path);
ret = lremovexattr(buffer, MAP_ACL_DEFAULT);
ret = local_removexattr_nofollow(ctx, path, MAP_ACL_DEFAULT);
if (ret == -1 && errno == ENODATA) {
/*
* We don't get ENODATA error when trying to remove a
@@ -146,7 +119,6 @@ static int mp_dacl_removexattr(FsContext *ctx,
errno = 0;
ret = 0;
}
g_free(buffer);
return ret;
}
+13
View File
@@ -1168,9 +1168,22 @@ static int proxy_init(FsContext *ctx)
return 0;
}
static void proxy_cleanup(FsContext *ctx)
{
V9fsProxy *proxy = ctx->private;
g_free(proxy->out_iovec.iov_base);
g_free(proxy->in_iovec.iov_base);
if (ctx->export_flags & V9FS_PROXY_SOCK_NAME) {
close(proxy->sockfd);
}
g_free(proxy);
}
FileOperations proxy_ops = {
.parse_opts = proxy_parse_opts,
.init = proxy_init,
.cleanup = proxy_cleanup,
.lstat = proxy_lstat,
.readlink = proxy_readlink,
.close = proxy_close,
+69
View File
@@ -0,0 +1,69 @@
/*
* 9p utilities
*
* Copyright IBM, Corp. 2017
*
* Authors:
* Greg Kurz <groug@kaod.org>
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "qemu/xattr.h"
#include "9p-util.h"
int relative_openat_nofollow(int dirfd, const char *path, int flags,
mode_t mode)
{
int fd;
fd = dup(dirfd);
if (fd == -1) {
return -1;
}
while (*path) {
const char *c;
int next_fd;
char *head;
/* Only relative paths without consecutive slashes */
assert(path[0] != '/');
head = g_strdup(path);
c = strchr(path, '/');
if (c) {
head[c - path] = 0;
next_fd = openat_dir(fd, head);
} else {
next_fd = openat_file(fd, head, flags, mode);
}
g_free(head);
if (next_fd == -1) {
close_preserve_errno(fd);
return -1;
}
close(fd);
fd = next_fd;
if (!c) {
break;
}
path = c + 1;
}
return fd;
}
ssize_t fgetxattrat_nofollow(int dirfd, const char *filename, const char *name,
void *value, size_t size)
{
char *proc_path = g_strdup_printf("/proc/self/fd/%d/%s", dirfd, filename);
int ret;
ret = lgetxattr(proc_path, name, value, size);
g_free(proc_path);
return ret;
}
+60
View File
@@ -0,0 +1,60 @@
/*
* 9p utilities
*
* Copyright IBM, Corp. 2017
*
* Authors:
* Greg Kurz <groug@kaod.org>
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#ifndef QEMU_9P_UTIL_H
#define QEMU_9P_UTIL_H
static inline void close_preserve_errno(int fd)
{
int serrno = errno;
close(fd);
errno = serrno;
}
static inline int openat_dir(int dirfd, const char *name)
{
#ifdef O_PATH
#define OPENAT_DIR_O_PATH O_PATH
#else
#define OPENAT_DIR_O_PATH 0
#endif
return openat(dirfd, name,
O_DIRECTORY | O_RDONLY | O_NOFOLLOW | OPENAT_DIR_O_PATH);
}
static inline int openat_file(int dirfd, const char *name, int flags,
mode_t mode)
{
int fd, serrno, ret;
fd = openat(dirfd, name, flags | O_NOFOLLOW | O_NOCTTY | O_NONBLOCK,
mode);
if (fd == -1) {
return -1;
}
serrno = errno;
/* O_NONBLOCK was only needed to open the file. Let's drop it. */
ret = fcntl(fd, F_SETFL, flags);
assert(!ret);
errno = serrno;
return fd;
}
int relative_openat_nofollow(int dirfd, const char *path, int flags,
mode_t mode);
ssize_t fgetxattrat_nofollow(int dirfd, const char *path, const char *name,
void *value, size_t size);
int fsetxattrat_nofollow(int dirfd, const char *path, const char *name,
void *value, size_t size, int flags);
#endif
+3 -21
View File
@@ -20,9 +20,6 @@
static ssize_t mp_user_getxattr(FsContext *ctx, const char *path,
const char *name, void *value, size_t size)
{
char *buffer;
ssize_t ret;
if (strncmp(name, "user.virtfs.", 12) == 0) {
/*
* Don't allow fetch of user.virtfs namesapce
@@ -31,10 +28,7 @@ static ssize_t mp_user_getxattr(FsContext *ctx, const char *path,
errno = ENOATTR;
return -1;
}
buffer = rpath(ctx, path);
ret = lgetxattr(buffer, name, value, size);
g_free(buffer);
return ret;
return local_getxattr_nofollow(ctx, path, name, value, size);
}
static ssize_t mp_user_listxattr(FsContext *ctx, const char *path,
@@ -73,9 +67,6 @@ static ssize_t mp_user_listxattr(FsContext *ctx, const char *path,
static int mp_user_setxattr(FsContext *ctx, const char *path, const char *name,
void *value, size_t size, int flags)
{
char *buffer;
int ret;
if (strncmp(name, "user.virtfs.", 12) == 0) {
/*
* Don't allow fetch of user.virtfs namesapce
@@ -84,18 +75,12 @@ static int mp_user_setxattr(FsContext *ctx, const char *path, const char *name,
errno = EACCES;
return -1;
}
buffer = rpath(ctx, path);
ret = lsetxattr(buffer, name, value, size, flags);
g_free(buffer);
return ret;
return local_setxattr_nofollow(ctx, path, name, value, size, flags);
}
static int mp_user_removexattr(FsContext *ctx,
const char *path, const char *name)
{
char *buffer;
int ret;
if (strncmp(name, "user.virtfs.", 12) == 0) {
/*
* Don't allow fetch of user.virtfs namesapce
@@ -104,10 +89,7 @@ static int mp_user_removexattr(FsContext *ctx,
errno = EACCES;
return -1;
}
buffer = rpath(ctx, path);
ret = lremovexattr(buffer, name);
g_free(buffer);
return ret;
return local_removexattr_nofollow(ctx, path, name);
}
XattrOperations mapped_user_xattr = {
+160 -6
View File
@@ -15,6 +15,8 @@
#include "9p.h"
#include "fsdev/file-op-9p.h"
#include "9p-xattr.h"
#include "9p-util.h"
#include "9p-local.h"
static XattrOperations *get_xattr_operations(XattrOperations **h,
@@ -58,6 +60,16 @@ ssize_t pt_listxattr(FsContext *ctx, const char *path,
return name_size;
}
static ssize_t flistxattrat_nofollow(int dirfd, const char *filename,
char *list, size_t size)
{
char *proc_path = g_strdup_printf("/proc/self/fd/%d/%s", dirfd, filename);
int ret;
ret = llistxattr(proc_path, list, size);
g_free(proc_path);
return ret;
}
/*
* Get the list and pass to each layer to find out whether
@@ -67,24 +79,37 @@ ssize_t v9fs_list_xattr(FsContext *ctx, const char *path,
void *value, size_t vsize)
{
ssize_t size = 0;
char *buffer;
void *ovalue = value;
XattrOperations *xops;
char *orig_value, *orig_value_start;
ssize_t xattr_len, parsed_len = 0, attr_len;
char *dirpath, *name;
int dirfd;
/* Get the actual len */
buffer = rpath(ctx, path);
xattr_len = llistxattr(buffer, value, 0);
dirpath = g_path_get_dirname(path);
dirfd = local_opendir_nofollow(ctx, dirpath);
g_free(dirpath);
if (dirfd == -1) {
return -1;
}
name = g_path_get_basename(path);
xattr_len = flistxattrat_nofollow(dirfd, name, value, 0);
if (xattr_len <= 0) {
g_free(buffer);
g_free(name);
close_preserve_errno(dirfd);
return xattr_len;
}
/* Now fetch the xattr and find the actual size */
orig_value = g_malloc(xattr_len);
xattr_len = llistxattr(buffer, orig_value, xattr_len);
g_free(buffer);
xattr_len = flistxattrat_nofollow(dirfd, name, orig_value, xattr_len);
g_free(name);
close_preserve_errno(dirfd);
if (xattr_len < 0) {
return -1;
}
/* store the orig pointer */
orig_value_start = orig_value;
@@ -143,6 +168,135 @@ int v9fs_remove_xattr(FsContext *ctx,
}
ssize_t local_getxattr_nofollow(FsContext *ctx, const char *path,
const char *name, void *value, size_t size)
{
char *dirpath = g_path_get_dirname(path);
char *filename = g_path_get_basename(path);
int dirfd;
ssize_t ret = -1;
dirfd = local_opendir_nofollow(ctx, dirpath);
if (dirfd == -1) {
goto out;
}
ret = fgetxattrat_nofollow(dirfd, filename, name, value, size);
close_preserve_errno(dirfd);
out:
g_free(dirpath);
g_free(filename);
return ret;
}
ssize_t pt_getxattr(FsContext *ctx, const char *path, const char *name,
void *value, size_t size)
{
return local_getxattr_nofollow(ctx, path, name, value, size);
}
int fsetxattrat_nofollow(int dirfd, const char *filename, const char *name,
void *value, size_t size, int flags)
{
char *proc_path = g_strdup_printf("/proc/self/fd/%d/%s", dirfd, filename);
int ret;
ret = lsetxattr(proc_path, name, value, size, flags);
g_free(proc_path);
return ret;
}
ssize_t local_setxattr_nofollow(FsContext *ctx, const char *path,
const char *name, void *value, size_t size,
int flags)
{
char *dirpath = g_path_get_dirname(path);
char *filename = g_path_get_basename(path);
int dirfd;
ssize_t ret = -1;
dirfd = local_opendir_nofollow(ctx, dirpath);
if (dirfd == -1) {
goto out;
}
ret = fsetxattrat_nofollow(dirfd, filename, name, value, size, flags);
close_preserve_errno(dirfd);
out:
g_free(dirpath);
g_free(filename);
return ret;
}
int pt_setxattr(FsContext *ctx, const char *path, const char *name, void *value,
size_t size, int flags)
{
return local_setxattr_nofollow(ctx, path, name, value, size, flags);
}
static ssize_t fremovexattrat_nofollow(int dirfd, const char *filename,
const char *name)
{
char *proc_path = g_strdup_printf("/proc/self/fd/%d/%s", dirfd, filename);
int ret;
ret = lremovexattr(proc_path, name);
g_free(proc_path);
return ret;
}
ssize_t local_removexattr_nofollow(FsContext *ctx, const char *path,
const char *name)
{
char *dirpath = g_path_get_dirname(path);
char *filename = g_path_get_basename(path);
int dirfd;
ssize_t ret = -1;
dirfd = local_opendir_nofollow(ctx, dirpath);
if (dirfd == -1) {
goto out;
}
ret = fremovexattrat_nofollow(dirfd, filename, name);
close_preserve_errno(dirfd);
out:
g_free(dirpath);
g_free(filename);
return ret;
}
int pt_removexattr(FsContext *ctx, const char *path, const char *name)
{
return local_removexattr_nofollow(ctx, path, name);
}
ssize_t notsup_getxattr(FsContext *ctx, const char *path, const char *name,
void *value, size_t size)
{
errno = ENOTSUP;
return -1;
}
int notsup_setxattr(FsContext *ctx, const char *path, const char *name,
void *value, size_t size, int flags)
{
errno = ENOTSUP;
return -1;
}
ssize_t notsup_listxattr(FsContext *ctx, const char *path, char *name,
void *value, size_t size)
{
return 0;
}
int notsup_removexattr(FsContext *ctx, const char *path, const char *name)
{
errno = ENOTSUP;
return -1;
}
XattrOperations *mapped_xattr_ops[] = {
&mapped_user_xattr,
&mapped_pacl_xattr,
+20 -65
View File
@@ -29,6 +29,13 @@ typedef struct xattr_operations
const char *path, const char *name);
} XattrOperations;
ssize_t local_getxattr_nofollow(FsContext *ctx, const char *path,
const char *name, void *value, size_t size);
ssize_t local_setxattr_nofollow(FsContext *ctx, const char *path,
const char *name, void *value, size_t size,
int flags);
ssize_t local_removexattr_nofollow(FsContext *ctx, const char *path,
const char *name);
extern XattrOperations mapped_user_xattr;
extern XattrOperations passthrough_user_xattr;
@@ -49,73 +56,21 @@ ssize_t v9fs_list_xattr(FsContext *ctx, const char *path, void *value,
int v9fs_set_xattr(FsContext *ctx, const char *path, const char *name,
void *value, size_t size, int flags);
int v9fs_remove_xattr(FsContext *ctx, const char *path, const char *name);
ssize_t pt_listxattr(FsContext *ctx, const char *path, char *name, void *value,
size_t size);
ssize_t pt_getxattr(FsContext *ctx, const char *path, const char *name,
void *value, size_t size);
int pt_setxattr(FsContext *ctx, const char *path, const char *name, void *value,
size_t size, int flags);
int pt_removexattr(FsContext *ctx, const char *path, const char *name);
static inline ssize_t pt_getxattr(FsContext *ctx, const char *path,
const char *name, void *value, size_t size)
{
char *buffer;
ssize_t ret;
buffer = rpath(ctx, path);
ret = lgetxattr(buffer, name, value, size);
g_free(buffer);
return ret;
}
static inline int pt_setxattr(FsContext *ctx, const char *path,
const char *name, void *value,
size_t size, int flags)
{
char *buffer;
int ret;
buffer = rpath(ctx, path);
ret = lsetxattr(buffer, name, value, size, flags);
g_free(buffer);
return ret;
}
static inline int pt_removexattr(FsContext *ctx,
const char *path, const char *name)
{
char *buffer;
int ret;
buffer = rpath(ctx, path);
ret = lremovexattr(path, name);
g_free(buffer);
return ret;
}
static inline ssize_t notsup_getxattr(FsContext *ctx, const char *path,
const char *name, void *value,
size_t size)
{
errno = ENOTSUP;
return -1;
}
static inline int notsup_setxattr(FsContext *ctx, const char *path,
const char *name, void *value,
size_t size, int flags)
{
errno = ENOTSUP;
return -1;
}
static inline ssize_t notsup_listxattr(FsContext *ctx, const char *path,
char *name, void *value, size_t size)
{
return 0;
}
static inline int notsup_removexattr(FsContext *ctx,
const char *path, const char *name)
{
errno = ENOTSUP;
return -1;
}
ssize_t notsup_getxattr(FsContext *ctx, const char *path, const char *name,
void *value, size_t size);
int notsup_setxattr(FsContext *ctx, const char *path, const char *name,
void *value, size_t size, int flags);
ssize_t notsup_listxattr(FsContext *ctx, const char *path, char *name,
void *value, size_t size);
int notsup_removexattr(FsContext *ctx, const char *path, const char *name);
#endif
+17 -7
View File
@@ -2337,7 +2337,7 @@ static void v9fs_flush(void *opaque)
ssize_t err;
int16_t tag;
size_t offset = 7;
V9fsPDU *cancel_pdu;
V9fsPDU *cancel_pdu = NULL;
V9fsPDU *pdu = opaque;
V9fsState *s = pdu->s;
@@ -2348,9 +2348,13 @@ static void v9fs_flush(void *opaque)
}
trace_v9fs_flush(pdu->tag, pdu->id, tag);
QLIST_FOREACH(cancel_pdu, &s->active_list, next) {
if (cancel_pdu->tag == tag) {
break;
if (pdu->tag == tag) {
error_report("Warning: the guest sent a self-referencing 9P flush request");
} else {
QLIST_FOREACH(cancel_pdu, &s->active_list, next) {
if (cancel_pdu->tag == tag) {
break;
}
}
}
if (cancel_pdu) {
@@ -3450,7 +3454,7 @@ int v9fs_device_realize_common(V9fsState *s, Error **errp)
/* initialize pdu allocator */
QLIST_INIT(&s->free_list);
QLIST_INIT(&s->active_list);
for (i = 0; i < (MAX_REQ - 1); i++) {
for (i = 0; i < MAX_REQ; i++) {
QLIST_INSERT_HEAD(&s->free_list, &v->pdus[i], next);
v->pdus[i].s = s;
v->pdus[i].idx = i;
@@ -3521,8 +3525,11 @@ int v9fs_device_realize_common(V9fsState *s, Error **errp)
rc = 0;
out:
if (rc) {
g_free(s->ctx.fs_root);
if (s->ops && s->ops->cleanup && s->ctx.private) {
s->ops->cleanup(&s->ctx);
}
g_free(s->tag);
g_free(s->ctx.fs_root);
v9fs_path_free(&path);
}
return rc;
@@ -3530,8 +3537,11 @@ out:
void v9fs_device_unrealize_common(V9fsState *s, Error **errp)
{
g_free(s->ctx.fs_root);
if (s->ops->cleanup) {
s->ops->cleanup(&s->ctx);
}
g_free(s->tag);
g_free(s->ctx.fs_root);
}
typedef struct VirtfsCoResetData {
+1 -1
View File
@@ -1,4 +1,4 @@
common-obj-y = 9p.o
common-obj-y = 9p.o 9p-util.o
common-obj-y += 9p-local.o 9p-xattr.o
common-obj-y += 9p-xattr-user.o 9p-posix-acl.o
common-obj-y += coth.o cofs.o codir.o cofile.o
+1 -1
View File
@@ -376,7 +376,7 @@ static void cchip_write(void *opaque, hwaddr addr,
break;
case 0x0240: /* DIM1 */
/* DIM: Device Interrupt Mask Register, CPU1. */
s->cchip.dim[0] = val;
s->cchip.dim[1] = val;
cpu_irq_change(s->cchip.cpu[1], val & s->cchip.drir);
break;
+17
View File
@@ -9,6 +9,7 @@
#include "qemu/osdep.h"
#include "qapi/error.h"
#include <libfdt.h>
#include "hw/hw.h"
#include "hw/arm/arm.h"
#include "hw/arm/linux-boot-if.h"
@@ -486,6 +487,17 @@ static int load_dtb(hwaddr addr, const struct arm_boot_info *binfo,
g_free(nodename);
}
} else {
Error *err = NULL;
rc = fdt_path_offset(fdt, "/memory");
if (rc < 0) {
qemu_fdt_add_subnode(fdt, "/memory");
}
if (!qemu_fdt_getprop(fdt, "/memory", "device_type", NULL, &err)) {
qemu_fdt_setprop_string(fdt, "/memory", "device_type", "memory");
}
rc = qemu_fdt_setprop_sized_cells(fdt, "/memory", "reg",
acells, binfo->loader_start,
scells, binfo->ram_size);
@@ -495,6 +507,11 @@ static int load_dtb(hwaddr addr, const struct arm_boot_info *binfo,
}
}
rc = fdt_path_offset(fdt, "/chosen");
if (rc < 0) {
qemu_fdt_add_subnode(fdt, "/chosen");
}
if (binfo->kernel_cmdline && *binfo->kernel_cmdline) {
rc = qemu_fdt_setprop_string(fdt, "/chosen", "bootargs",
binfo->kernel_cmdline);
+1 -1
View File
@@ -809,7 +809,7 @@ static MemoryRegion *acpi_add_rom_blob(AcpiBuildState *build_state,
uint64_t max_size)
{
return rom_add_blob(name, blob->data, acpi_data_len(blob), max_size, -1,
name, virt_acpi_build_update, build_state);
name, virt_acpi_build_update, build_state, NULL);
}
static const VMStateDescription vmstate_virt_acpi_build = {
+3 -1
View File
@@ -929,9 +929,11 @@ static void create_fw_cfg(const VirtBoardInfo *vbi, AddressSpace *as)
{
hwaddr base = vbi->memmap[VIRT_FW_CFG].base;
hwaddr size = vbi->memmap[VIRT_FW_CFG].size;
FWCfgState *fw_cfg;
char *nodename;
fw_cfg_init_mem_wide(base + 8, base, 8, base + 16, as);
fw_cfg = fw_cfg_init_mem_wide(base + 8, base, 8, base + 16, as);
fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, (uint16_t)smp_cpus);
nodename = g_strdup_printf("/fw-cfg@%" PRIx64, base);
qemu_fdt_add_subnode(vbi->fdt, nodename);
+10
View File
@@ -54,6 +54,7 @@ typedef struct {
unsigned int play_pos;
uint8_t data_on;
uint8_t dummy_refresh_clock;
bool migrate;
} PCSpkState;
static const char *s_spk = "pcspk";
@@ -187,11 +188,19 @@ static void pcspk_realizefn(DeviceState *dev, Error **errp)
pcspk_state = s;
}
static bool migrate_needed(void *opaque)
{
PCSpkState *s = opaque;
return s->migrate;
}
static const VMStateDescription vmstate_spk = {
.name = "pcspk",
.version_id = 1,
.minimum_version_id = 1,
.minimum_version_id_old = 1,
.needed = migrate_needed,
.fields = (VMStateField[]) {
VMSTATE_UINT8(data_on, PCSpkState),
VMSTATE_UINT8(dummy_refresh_clock, PCSpkState),
@@ -201,6 +210,7 @@ static const VMStateDescription vmstate_spk = {
static Property pcspk_properties[] = {
DEFINE_PROP_UINT32("iobase", PCSpkState, iobase, -1),
DEFINE_PROP_BOOL("migrate", PCSpkState, migrate, true),
DEFINE_PROP_END_OF_LIST(),
};
+1 -3
View File
@@ -68,9 +68,7 @@ static void notify_guest_bh(void *opaque)
unsigned i = j + ctzl(bits);
VirtQueue *vq = virtio_get_queue(s->vdev, i);
if (virtio_should_notify(s->vdev, vq)) {
event_notifier_set(virtio_queue_get_guest_notifier(vq));
}
virtio_notify_irqfd(s->vdev, vq);
bits &= bits - 1; /* clear right-most bit */
}
+36 -6
View File
@@ -660,6 +660,38 @@ static void qemu_aio_complete(void *opaque, int ret)
qemu_bh_schedule(ioreq->blkdev->bh);
}
static bool blk_split_discard(struct ioreq *ioreq, blkif_sector_t sector_number,
uint64_t nr_sectors)
{
struct XenBlkDev *blkdev = ioreq->blkdev;
int64_t byte_offset;
int byte_chunk;
uint64_t byte_remaining, limit;
uint64_t sec_start = sector_number;
uint64_t sec_count = nr_sectors;
/* Wrap around, or overflowing byte limit? */
if (sec_start + sec_count < sec_count ||
sec_start + sec_count > INT64_MAX >> BDRV_SECTOR_BITS) {
return false;
}
limit = BDRV_REQUEST_MAX_SECTORS << BDRV_SECTOR_BITS;
byte_offset = sec_start << BDRV_SECTOR_BITS;
byte_remaining = sec_count << BDRV_SECTOR_BITS;
do {
byte_chunk = byte_remaining > limit ? limit : byte_remaining;
ioreq->aio_inflight++;
blk_aio_pdiscard(blkdev->blk, byte_offset, byte_chunk,
qemu_aio_complete, ioreq);
byte_remaining -= byte_chunk;
byte_offset += byte_chunk;
} while (byte_remaining > 0);
return true;
}
static int ioreq_runio_qemu_aio(struct ioreq *ioreq)
{
struct XenBlkDev *blkdev = ioreq->blkdev;
@@ -708,12 +740,10 @@ static int ioreq_runio_qemu_aio(struct ioreq *ioreq)
break;
case BLKIF_OP_DISCARD:
{
struct blkif_request_discard *discard_req = (void *)&ioreq->req;
ioreq->aio_inflight++;
blk_aio_pdiscard(blkdev->blk,
discard_req->sector_number << BDRV_SECTOR_BITS,
discard_req->nr_sectors << BDRV_SECTOR_BITS,
qemu_aio_complete, ioreq);
struct blkif_request_discard *req = (void *)&ioreq->req;
if (!blk_split_discard(ioreq, req->sector_number, req->nr_sectors)) {
goto err;
}
break;
}
default:
+1 -1
View File
@@ -25,7 +25,7 @@ static int vty_can_receive(void *opaque)
{
VIOsPAPRVTYDevice *dev = VIO_SPAPR_VTY_DEVICE(opaque);
return (dev->in - dev->out) < VTERM_BUFSIZE;
return VTERM_BUFSIZE - (dev->in - dev->out);
}
static void vty_receive(void *opaque, const uint8_t *buf, int size)
+6 -1
View File
@@ -93,7 +93,12 @@ static void generic_loader_realize(DeviceState *dev, Error **errp)
"image");
return;
}
s->set_pc = true;
/* The user specified a file, only set the PC if they also specified
* a CPU to use.
*/
if (s->cpu_num != CPU_NONE) {
s->set_pc = true;
}
} else if (s->addr) {
/* User is setting the PC */
if (s->data || s->data_len || s->data_be) {
+4 -2
View File
@@ -818,7 +818,7 @@ static QTAILQ_HEAD(, Rom) roms = QTAILQ_HEAD_INITIALIZER(roms);
static inline bool rom_order_compare(Rom *rom, Rom *item)
{
return (rom->as > item->as) ||
return ((uintptr_t)(void *)rom->as > (uintptr_t)(void *)item->as) ||
(rom->as == item->as && rom->addr >= item->addr);
}
@@ -978,7 +978,8 @@ err:
MemoryRegion *rom_add_blob(const char *name, const void *blob, size_t len,
size_t max_len, hwaddr addr, const char *fw_file_name,
FWCfgReadCallback fw_callback, void *callback_opaque)
FWCfgReadCallback fw_callback, void *callback_opaque,
AddressSpace *as)
{
MachineClass *mc = MACHINE_GET_CLASS(qdev_get_machine());
Rom *rom;
@@ -986,6 +987,7 @@ MemoryRegion *rom_add_blob(const char *name, const void *blob, size_t len,
rom = g_malloc0(sizeof(*rom));
rom->name = g_strdup(name);
rom->as = as;
rom->addr = addr;
rom->romsize = max_len ? max_len : len;
rom->datasize = len;
+36 -3
View File
@@ -554,11 +554,31 @@ static void machine_class_finalize(ObjectClass *klass, void *data)
g_free(mc->name);
}
static void register_compat_prop(const char *driver,
const char *property,
const char *value)
{
GlobalProperty *p = g_new0(GlobalProperty, 1);
/* Machine compat_props must never cause errors: */
p->errp = &error_abort;
p->driver = driver;
p->property = property;
p->value = value;
qdev_prop_register_global(p);
}
static void machine_register_compat_for_subclass(ObjectClass *oc, void *opaque)
{
GlobalProperty *p = opaque;
register_compat_prop(object_class_get_name(oc), p->property, p->value);
}
void machine_register_compat_props(MachineState *machine)
{
MachineClass *mc = MACHINE_GET_CLASS(machine);
int i;
GlobalProperty *p;
ObjectClass *oc;
if (!mc->compat_props) {
return;
@@ -566,9 +586,22 @@ void machine_register_compat_props(MachineState *machine)
for (i = 0; i < mc->compat_props->len; i++) {
p = g_array_index(mc->compat_props, GlobalProperty *, i);
/* Machine compat_props must never cause errors: */
p->errp = &error_abort;
qdev_prop_register_global(p);
oc = object_class_by_name(p->driver);
if (oc && object_class_is_abstract(oc)) {
/* temporary hack to make sure we do not override
* globals set explicitly on -global: if an abstract class
* is on compat_props, register globals for all its
* non-abstract subtypes instead.
*
* This doesn't solve the problem for cases where
* a non-abstract typename mentioned on compat_props
* has subclasses, like spapr-pci-host-bridge.
*/
object_class_foreach(machine_register_compat_for_subclass,
p->driver, false, p);
} else {
register_compat_prop(p->driver, p->property, p->value);
}
}
}
+121 -47
View File
@@ -177,11 +177,12 @@
struct CirrusVGAState;
typedef void (*cirrus_bitblt_rop_t) (struct CirrusVGAState *s,
uint8_t * dst, const uint8_t * src,
uint32_t dstaddr, uint32_t srcaddr,
int dstpitch, int srcpitch,
int bltwidth, int bltheight);
typedef void (*cirrus_fill_t)(struct CirrusVGAState *s,
uint8_t *dst, int dst_pitch, int width, int height);
uint32_t dstaddr, int dst_pitch,
int width, int height);
typedef struct CirrusVGAState {
VGACommonState vga;
@@ -272,12 +273,14 @@ static void cirrus_update_memory_access(CirrusVGAState *s);
static bool blit_region_is_unsafe(struct CirrusVGAState *s,
int32_t pitch, int32_t addr)
{
if (!pitch) {
return true;
}
if (pitch < 0) {
int64_t min = addr
+ ((int64_t)s->cirrus_blt_height-1) * pitch;
int32_t max = addr
+ s->cirrus_blt_width;
if (min < 0 || max > s->vga.vram_size) {
+ ((int64_t)s->cirrus_blt_height - 1) * pitch
- s->cirrus_blt_width;
if (min < -1 || addr >= s->vga.vram_size) {
return true;
}
} else {
@@ -291,7 +294,7 @@ static bool blit_region_is_unsafe(struct CirrusVGAState *s,
return false;
}
static bool blit_is_unsafe(struct CirrusVGAState *s)
static bool blit_is_unsafe(struct CirrusVGAState *s, bool dst_only)
{
/* should be the case, see cirrus_bitblt_start */
assert(s->cirrus_blt_width > 0);
@@ -302,11 +305,14 @@ static bool blit_is_unsafe(struct CirrusVGAState *s)
}
if (blit_region_is_unsafe(s, s->cirrus_blt_dstpitch,
s->cirrus_blt_dstaddr & s->cirrus_addr_mask)) {
s->cirrus_blt_dstaddr)) {
return true;
}
if (dst_only) {
return false;
}
if (blit_region_is_unsafe(s, s->cirrus_blt_srcpitch,
s->cirrus_blt_srcaddr & s->cirrus_addr_mask)) {
s->cirrus_blt_srcaddr)) {
return true;
}
@@ -314,18 +320,57 @@ static bool blit_is_unsafe(struct CirrusVGAState *s)
}
static void cirrus_bitblt_rop_nop(CirrusVGAState *s,
uint8_t *dst,const uint8_t *src,
uint32_t dstaddr, uint32_t srcaddr,
int dstpitch,int srcpitch,
int bltwidth,int bltheight)
{
}
static void cirrus_bitblt_fill_nop(CirrusVGAState *s,
uint8_t *dst,
uint32_t dstaddr,
int dstpitch, int bltwidth,int bltheight)
{
}
static inline uint8_t cirrus_src(CirrusVGAState *s, uint32_t srcaddr)
{
if (s->cirrus_srccounter) {
/* cputovideo */
return s->cirrus_bltbuf[srcaddr & (CIRRUS_BLTBUFSIZE - 1)];
} else {
/* videotovideo */
return s->vga.vram_ptr[srcaddr & s->cirrus_addr_mask];
}
}
static inline uint16_t cirrus_src16(CirrusVGAState *s, uint32_t srcaddr)
{
uint16_t *src;
if (s->cirrus_srccounter) {
/* cputovideo */
src = (void *)&s->cirrus_bltbuf[srcaddr & (CIRRUS_BLTBUFSIZE - 1) & ~1];
} else {
/* videotovideo */
src = (void *)&s->vga.vram_ptr[srcaddr & s->cirrus_addr_mask & ~1];
}
return *src;
}
static inline uint32_t cirrus_src32(CirrusVGAState *s, uint32_t srcaddr)
{
uint32_t *src;
if (s->cirrus_srccounter) {
/* cputovideo */
src = (void *)&s->cirrus_bltbuf[srcaddr & (CIRRUS_BLTBUFSIZE - 1) & ~3];
} else {
/* videotovideo */
src = (void *)&s->vga.vram_ptr[srcaddr & s->cirrus_addr_mask & ~3];
}
return *src;
}
#define ROP_NAME 0
#define ROP_FN(d, s) 0
#include "cirrus_vga_rop.h"
@@ -655,25 +700,51 @@ static void cirrus_invalidate_region(CirrusVGAState * s, int off_begin,
int off_cur;
int off_cur_end;
if (off_pitch < 0) {
off_begin -= bytesperline - 1;
}
for (y = 0; y < lines; y++) {
off_cur = off_begin;
off_cur_end = (off_cur + bytesperline) & s->cirrus_addr_mask;
off_cur = off_begin;
off_cur_end = ((off_cur + bytesperline - 1) & s->cirrus_addr_mask) + 1;
assert(off_cur_end >= off_cur);
memory_region_set_dirty(&s->vga.vram, off_cur, off_cur_end - off_cur);
off_begin += off_pitch;
off_begin += off_pitch;
}
}
static int cirrus_bitblt_common_patterncopy(CirrusVGAState * s,
const uint8_t * src)
static int cirrus_bitblt_common_patterncopy(CirrusVGAState *s)
{
uint8_t *dst;
uint32_t patternsize;
bool videosrc = !s->cirrus_srccounter;
dst = s->vga.vram_ptr + (s->cirrus_blt_dstaddr & s->cirrus_addr_mask);
if (videosrc) {
switch (s->vga.get_bpp(&s->vga)) {
case 8:
patternsize = 64;
break;
case 15:
case 16:
patternsize = 128;
break;
case 24:
case 32:
default:
patternsize = 256;
break;
}
s->cirrus_blt_srcaddr &= ~(patternsize - 1);
if (s->cirrus_blt_srcaddr + patternsize > s->vga.vram_size) {
return 0;
}
}
if (blit_is_unsafe(s))
if (blit_is_unsafe(s, true)) {
return 0;
}
(*s->cirrus_rop) (s, dst, src,
(*s->cirrus_rop) (s, s->cirrus_blt_dstaddr,
videosrc ? s->cirrus_blt_srcaddr : 0,
s->cirrus_blt_dstpitch, 0,
s->cirrus_blt_width, s->cirrus_blt_height);
cirrus_invalidate_region(s, s->cirrus_blt_dstaddr,
@@ -688,11 +759,11 @@ static int cirrus_bitblt_solidfill(CirrusVGAState *s, int blt_rop)
{
cirrus_fill_t rop_func;
if (blit_is_unsafe(s)) {
if (blit_is_unsafe(s, true)) {
return 0;
}
rop_func = cirrus_fill[rop_to_index[blt_rop]][s->cirrus_blt_pixelwidth - 1];
rop_func(s, s->vga.vram_ptr + (s->cirrus_blt_dstaddr & s->cirrus_addr_mask),
rop_func(s, s->cirrus_blt_dstaddr,
s->cirrus_blt_dstpitch,
s->cirrus_blt_width, s->cirrus_blt_height);
cirrus_invalidate_region(s, s->cirrus_blt_dstaddr,
@@ -710,12 +781,10 @@ static int cirrus_bitblt_solidfill(CirrusVGAState *s, int blt_rop)
static int cirrus_bitblt_videotovideo_patterncopy(CirrusVGAState * s)
{
return cirrus_bitblt_common_patterncopy(s,
s->vga.vram_ptr + ((s->cirrus_blt_srcaddr & ~7) &
s->cirrus_addr_mask));
return cirrus_bitblt_common_patterncopy(s);
}
static void cirrus_do_copy(CirrusVGAState *s, int dst, int src, int w, int h)
static int cirrus_do_copy(CirrusVGAState *s, int dst, int src, int w, int h)
{
int sx = 0, sy = 0;
int dx = 0, dy = 0;
@@ -729,6 +798,9 @@ static void cirrus_do_copy(CirrusVGAState *s, int dst, int src, int w, int h)
int width, height;
depth = s->vga.get_bpp(&s->vga) / 8;
if (!depth) {
return 0;
}
s->vga.get_resolution(&s->vga, &width, &height);
/* extra x, y */
@@ -758,23 +830,15 @@ static void cirrus_do_copy(CirrusVGAState *s, int dst, int src, int w, int h)
}
}
/* we have to flush all pending changes so that the copy
is generated at the appropriate moment in time */
if (notify)
graphic_hw_update(s->vga.con);
(*s->cirrus_rop) (s, s->vga.vram_ptr +
(s->cirrus_blt_dstaddr & s->cirrus_addr_mask),
s->vga.vram_ptr +
(s->cirrus_blt_srcaddr & s->cirrus_addr_mask),
(*s->cirrus_rop) (s, s->cirrus_blt_dstaddr,
s->cirrus_blt_srcaddr,
s->cirrus_blt_dstpitch, s->cirrus_blt_srcpitch,
s->cirrus_blt_width, s->cirrus_blt_height);
if (notify) {
qemu_console_copy(s->vga.con,
sx, sy, dx, dy,
s->cirrus_blt_width / depth,
s->cirrus_blt_height);
dpy_gfx_update(s->vga.con, dx, dy,
s->cirrus_blt_width / depth,
s->cirrus_blt_height);
}
/* we don't have to notify the display that this portion has
@@ -783,18 +847,18 @@ static void cirrus_do_copy(CirrusVGAState *s, int dst, int src, int w, int h)
cirrus_invalidate_region(s, s->cirrus_blt_dstaddr,
s->cirrus_blt_dstpitch, s->cirrus_blt_width,
s->cirrus_blt_height);
return 1;
}
static int cirrus_bitblt_videotovideo_copy(CirrusVGAState * s)
{
if (blit_is_unsafe(s))
if (blit_is_unsafe(s, false))
return 0;
cirrus_do_copy(s, s->cirrus_blt_dstaddr - s->vga.start_addr,
return cirrus_do_copy(s, s->cirrus_blt_dstaddr - s->vga.start_addr,
s->cirrus_blt_srcaddr - s->vga.start_addr,
s->cirrus_blt_width, s->cirrus_blt_height);
return 1;
}
/***************************************
@@ -810,16 +874,15 @@ static void cirrus_bitblt_cputovideo_next(CirrusVGAState * s)
if (s->cirrus_srccounter > 0) {
if (s->cirrus_blt_mode & CIRRUS_BLTMODE_PATTERNCOPY) {
cirrus_bitblt_common_patterncopy(s, s->cirrus_bltbuf);
cirrus_bitblt_common_patterncopy(s);
the_end:
s->cirrus_srccounter = 0;
cirrus_bitblt_reset(s);
} else {
/* at least one scan line */
do {
(*s->cirrus_rop)(s, s->vga.vram_ptr +
(s->cirrus_blt_dstaddr & s->cirrus_addr_mask),
s->cirrus_bltbuf, 0, 0, s->cirrus_blt_width, 1);
(*s->cirrus_rop)(s, s->cirrus_blt_dstaddr,
0, 0, 0, s->cirrus_blt_width, 1);
cirrus_invalidate_region(s, s->cirrus_blt_dstaddr, 0,
s->cirrus_blt_width, 1);
s->cirrus_blt_dstaddr += s->cirrus_blt_dstpitch;
@@ -865,6 +928,10 @@ static int cirrus_bitblt_cputovideo(CirrusVGAState * s)
{
int w;
if (blit_is_unsafe(s, true)) {
return 0;
}
s->cirrus_blt_mode &= ~CIRRUS_BLTMODE_MEMSYSSRC;
s->cirrus_srcptr = &s->cirrus_bltbuf[0];
s->cirrus_srcptr_end = &s->cirrus_bltbuf[0];
@@ -890,6 +957,10 @@ static int cirrus_bitblt_cputovideo(CirrusVGAState * s)
}
s->cirrus_srccounter = s->cirrus_blt_srcpitch * s->cirrus_blt_height;
}
/* the blit_is_unsafe call above should catch this */
assert(s->cirrus_blt_srcpitch <= CIRRUS_BLTBUFSIZE);
s->cirrus_srcptr = s->cirrus_bltbuf;
s->cirrus_srcptr_end = s->cirrus_bltbuf + s->cirrus_blt_srcpitch;
cirrus_update_memory_access(s);
@@ -937,6 +1008,9 @@ static void cirrus_bitblt_start(CirrusVGAState * s)
s->cirrus_blt_modeext = s->vga.gr[0x33];
blt_rop = s->vga.gr[0x32];
s->cirrus_blt_dstaddr &= s->cirrus_addr_mask;
s->cirrus_blt_srcaddr &= s->cirrus_addr_mask;
#ifdef DEBUG_BITBLT
printf("rop=0x%02x mode=0x%02x modeext=0x%02x w=%d h=%d dpitch=%d spitch=%d daddr=0x%08x saddr=0x%08x writemask=0x%02x\n",
blt_rop,
+115 -76
View File
@@ -22,31 +22,65 @@
* THE SOFTWARE.
*/
static inline void glue(rop_8_,ROP_NAME)(uint8_t *dst, uint8_t src)
static inline void glue(rop_8_, ROP_NAME)(CirrusVGAState *s,
uint32_t dstaddr, uint8_t src)
{
uint8_t *dst = &s->vga.vram_ptr[dstaddr & s->cirrus_addr_mask];
*dst = ROP_FN(*dst, src);
}
static inline void glue(rop_16_,ROP_NAME)(uint16_t *dst, uint16_t src)
static inline void glue(rop_tr_8_, ROP_NAME)(CirrusVGAState *s,
uint32_t dstaddr, uint8_t src,
uint8_t transp)
{
uint8_t *dst = &s->vga.vram_ptr[dstaddr & s->cirrus_addr_mask];
uint8_t pixel = ROP_FN(*dst, src);
if (pixel != transp) {
*dst = pixel;
}
}
static inline void glue(rop_16_, ROP_NAME)(CirrusVGAState *s,
uint32_t dstaddr, uint16_t src)
{
uint16_t *dst = (uint16_t *)
(&s->vga.vram_ptr[dstaddr & s->cirrus_addr_mask & ~1]);
*dst = ROP_FN(*dst, src);
}
static inline void glue(rop_32_,ROP_NAME)(uint32_t *dst, uint32_t src)
static inline void glue(rop_tr_16_, ROP_NAME)(CirrusVGAState *s,
uint32_t dstaddr, uint16_t src,
uint16_t transp)
{
uint16_t *dst = (uint16_t *)
(&s->vga.vram_ptr[dstaddr & s->cirrus_addr_mask & ~1]);
uint16_t pixel = ROP_FN(*dst, src);
if (pixel != transp) {
*dst = pixel;
}
}
static inline void glue(rop_32_, ROP_NAME)(CirrusVGAState *s,
uint32_t dstaddr, uint32_t src)
{
uint32_t *dst = (uint32_t *)
(&s->vga.vram_ptr[dstaddr & s->cirrus_addr_mask & ~3]);
*dst = ROP_FN(*dst, src);
}
#define ROP_OP(d, s) glue(rop_8_,ROP_NAME)(d, s)
#define ROP_OP_16(d, s) glue(rop_16_,ROP_NAME)(d, s)
#define ROP_OP_32(d, s) glue(rop_32_,ROP_NAME)(d, s)
#define ROP_OP(st, d, s) glue(rop_8_, ROP_NAME)(st, d, s)
#define ROP_OP_TR(st, d, s, t) glue(rop_tr_8_, ROP_NAME)(st, d, s, t)
#define ROP_OP_16(st, d, s) glue(rop_16_, ROP_NAME)(st, d, s)
#define ROP_OP_TR_16(st, d, s, t) glue(rop_tr_16_, ROP_NAME)(st, d, s, t)
#define ROP_OP_32(st, d, s) glue(rop_32_, ROP_NAME)(st, d, s)
#undef ROP_FN
static void
glue(cirrus_bitblt_rop_fwd_, ROP_NAME)(CirrusVGAState *s,
uint8_t *dst,const uint8_t *src,
int dstpitch,int srcpitch,
int bltwidth,int bltheight)
uint32_t dstaddr,
uint32_t srcaddr,
int dstpitch, int srcpitch,
int bltwidth, int bltheight)
{
int x,y;
dstpitch -= bltwidth;
@@ -58,134 +92,139 @@ glue(cirrus_bitblt_rop_fwd_, ROP_NAME)(CirrusVGAState *s,
for (y = 0; y < bltheight; y++) {
for (x = 0; x < bltwidth; x++) {
ROP_OP(dst, *src);
dst++;
src++;
ROP_OP(s, dstaddr, cirrus_src(s, srcaddr));
dstaddr++;
srcaddr++;
}
dst += dstpitch;
src += srcpitch;
dstaddr += dstpitch;
srcaddr += srcpitch;
}
}
static void
glue(cirrus_bitblt_rop_bkwd_, ROP_NAME)(CirrusVGAState *s,
uint8_t *dst,const uint8_t *src,
int dstpitch,int srcpitch,
int bltwidth,int bltheight)
uint32_t dstaddr,
uint32_t srcaddr,
int dstpitch, int srcpitch,
int bltwidth, int bltheight)
{
int x,y;
dstpitch += bltwidth;
srcpitch += bltwidth;
for (y = 0; y < bltheight; y++) {
for (x = 0; x < bltwidth; x++) {
ROP_OP(dst, *src);
dst--;
src--;
ROP_OP(s, dstaddr, cirrus_src(s, srcaddr));
dstaddr--;
srcaddr--;
}
dst += dstpitch;
src += srcpitch;
dstaddr += dstpitch;
srcaddr += srcpitch;
}
}
static void
glue(glue(cirrus_bitblt_rop_fwd_transp_, ROP_NAME),_8)(CirrusVGAState *s,
uint8_t *dst,const uint8_t *src,
int dstpitch,int srcpitch,
int bltwidth,int bltheight)
uint32_t dstaddr,
uint32_t srcaddr,
int dstpitch,
int srcpitch,
int bltwidth,
int bltheight)
{
int x,y;
uint8_t p;
uint8_t transp = s->vga.gr[0x34];
dstpitch -= bltwidth;
srcpitch -= bltwidth;
if (bltheight > 1 && (dstpitch < 0 || srcpitch < 0)) {
return;
}
for (y = 0; y < bltheight; y++) {
for (x = 0; x < bltwidth; x++) {
p = *dst;
ROP_OP(&p, *src);
if (p != s->vga.gr[0x34]) *dst = p;
dst++;
src++;
ROP_OP_TR(s, dstaddr, cirrus_src(s, srcaddr), transp);
dstaddr++;
srcaddr++;
}
dst += dstpitch;
src += srcpitch;
dstaddr += dstpitch;
srcaddr += srcpitch;
}
}
static void
glue(glue(cirrus_bitblt_rop_bkwd_transp_, ROP_NAME),_8)(CirrusVGAState *s,
uint8_t *dst,const uint8_t *src,
int dstpitch,int srcpitch,
int bltwidth,int bltheight)
uint32_t dstaddr,
uint32_t srcaddr,
int dstpitch,
int srcpitch,
int bltwidth,
int bltheight)
{
int x,y;
uint8_t p;
uint8_t transp = s->vga.gr[0x34];
dstpitch += bltwidth;
srcpitch += bltwidth;
for (y = 0; y < bltheight; y++) {
for (x = 0; x < bltwidth; x++) {
p = *dst;
ROP_OP(&p, *src);
if (p != s->vga.gr[0x34]) *dst = p;
dst--;
src--;
ROP_OP_TR(s, dstaddr, cirrus_src(s, srcaddr), transp);
dstaddr--;
srcaddr--;
}
dst += dstpitch;
src += srcpitch;
dstaddr += dstpitch;
srcaddr += srcpitch;
}
}
static void
glue(glue(cirrus_bitblt_rop_fwd_transp_, ROP_NAME),_16)(CirrusVGAState *s,
uint8_t *dst,const uint8_t *src,
int dstpitch,int srcpitch,
int bltwidth,int bltheight)
uint32_t dstaddr,
uint32_t srcaddr,
int dstpitch,
int srcpitch,
int bltwidth,
int bltheight)
{
int x,y;
uint8_t p1, p2;
uint16_t transp = s->vga.gr[0x34] | (uint16_t)s->vga.gr[0x35] << 8;
dstpitch -= bltwidth;
srcpitch -= bltwidth;
if (bltheight > 1 && (dstpitch < 0 || srcpitch < 0)) {
return;
}
for (y = 0; y < bltheight; y++) {
for (x = 0; x < bltwidth; x+=2) {
p1 = *dst;
p2 = *(dst+1);
ROP_OP(&p1, *src);
ROP_OP(&p2, *(src + 1));
if ((p1 != s->vga.gr[0x34]) || (p2 != s->vga.gr[0x35])) {
*dst = p1;
*(dst+1) = p2;
}
dst+=2;
src+=2;
ROP_OP_TR_16(s, dstaddr, cirrus_src16(s, srcaddr), transp);
dstaddr += 2;
srcaddr += 2;
}
dst += dstpitch;
src += srcpitch;
dstaddr += dstpitch;
srcaddr += srcpitch;
}
}
static void
glue(glue(cirrus_bitblt_rop_bkwd_transp_, ROP_NAME),_16)(CirrusVGAState *s,
uint8_t *dst,const uint8_t *src,
int dstpitch,int srcpitch,
int bltwidth,int bltheight)
uint32_t dstaddr,
uint32_t srcaddr,
int dstpitch,
int srcpitch,
int bltwidth,
int bltheight)
{
int x,y;
uint8_t p1, p2;
uint16_t transp = s->vga.gr[0x34] | (uint16_t)s->vga.gr[0x35] << 8;
dstpitch += bltwidth;
srcpitch += bltwidth;
for (y = 0; y < bltheight; y++) {
for (x = 0; x < bltwidth; x+=2) {
p1 = *(dst-1);
p2 = *dst;
ROP_OP(&p1, *(src - 1));
ROP_OP(&p2, *src);
if ((p1 != s->vga.gr[0x34]) || (p2 != s->vga.gr[0x35])) {
*(dst-1) = p1;
*dst = p2;
}
dst-=2;
src-=2;
ROP_OP_TR_16(s, dstaddr - 1, cirrus_src16(s, srcaddr - 1), transp);
dstaddr -= 2;
srcaddr -= 2;
}
dst += dstpitch;
src += srcpitch;
dstaddr += dstpitch;
srcaddr += srcpitch;
}
}
+64 -61
View File
@@ -23,30 +23,32 @@
*/
#if DEPTH == 8
#define PUTPIXEL() ROP_OP(&d[0], col)
#define PUTPIXEL(s, a, c) ROP_OP(s, a, c)
#elif DEPTH == 16
#define PUTPIXEL() ROP_OP_16((uint16_t *)&d[0], col)
#define PUTPIXEL(s, a, c) ROP_OP_16(s, a, c)
#elif DEPTH == 24
#define PUTPIXEL() ROP_OP(&d[0], col); \
ROP_OP(&d[1], (col >> 8)); \
ROP_OP(&d[2], (col >> 16))
#define PUTPIXEL(s, a, c) do { \
ROP_OP(s, a, c); \
ROP_OP(s, a + 1, (col >> 8)); \
ROP_OP(s, a + 2, (col >> 16)); \
} while (0)
#elif DEPTH == 32
#define PUTPIXEL() ROP_OP_32(((uint32_t *)&d[0]), col)
#define PUTPIXEL(s, a, c) ROP_OP_32(s, a, c)
#else
#error unsupported DEPTH
#endif
static void
glue(glue(glue(cirrus_patternfill_, ROP_NAME), _),DEPTH)
(CirrusVGAState * s, uint8_t * dst,
const uint8_t * src,
(CirrusVGAState *s, uint32_t dstaddr,
uint32_t srcaddr,
int dstpitch, int srcpitch,
int bltwidth, int bltheight)
{
uint8_t *d;
uint32_t addr;
int x, y, pattern_y, pattern_pitch, pattern_x;
unsigned int col;
const uint8_t *src1;
uint32_t src1addr;
#if DEPTH == 24
int skipleft = s->vga.gr[0x2f] & 0x1f;
#else
@@ -63,42 +65,44 @@ glue(glue(glue(cirrus_patternfill_, ROP_NAME), _),DEPTH)
pattern_y = s->cirrus_blt_srcaddr & 7;
for(y = 0; y < bltheight; y++) {
pattern_x = skipleft;
d = dst + skipleft;
src1 = src + pattern_y * pattern_pitch;
addr = dstaddr + skipleft;
src1addr = srcaddr + pattern_y * pattern_pitch;
for (x = skipleft; x < bltwidth; x += (DEPTH / 8)) {
#if DEPTH == 8
col = src1[pattern_x];
col = cirrus_src(s, src1addr + pattern_x);
pattern_x = (pattern_x + 1) & 7;
#elif DEPTH == 16
col = ((uint16_t *)(src1 + pattern_x))[0];
col = cirrus_src16(s, src1addr + pattern_x);
pattern_x = (pattern_x + 2) & 15;
#elif DEPTH == 24
{
const uint8_t *src2 = src1 + pattern_x * 3;
col = src2[0] | (src2[1] << 8) | (src2[2] << 16);
uint32_t src2addr = src1addr + pattern_x * 3;
col = cirrus_src(s, src2addr) |
(cirrus_src(s, src2addr + 1) << 8) |
(cirrus_src(s, src2addr + 2) << 16);
pattern_x = (pattern_x + 1) & 7;
}
#else
col = ((uint32_t *)(src1 + pattern_x))[0];
col = cirrus_src32(s, src1addr + pattern_x);
pattern_x = (pattern_x + 4) & 31;
#endif
PUTPIXEL();
d += (DEPTH / 8);
PUTPIXEL(s, addr, col);
addr += (DEPTH / 8);
}
pattern_y = (pattern_y + 1) & 7;
dst += dstpitch;
dstaddr += dstpitch;
}
}
/* NOTE: srcpitch is ignored */
static void
glue(glue(glue(cirrus_colorexpand_transp_, ROP_NAME), _),DEPTH)
(CirrusVGAState * s, uint8_t * dst,
const uint8_t * src,
(CirrusVGAState *s, uint32_t dstaddr,
uint32_t srcaddr,
int dstpitch, int srcpitch,
int bltwidth, int bltheight)
{
uint8_t *d;
uint32_t addr;
int x, y;
unsigned bits, bits_xor;
unsigned int col;
@@ -122,33 +126,33 @@ glue(glue(glue(cirrus_colorexpand_transp_, ROP_NAME), _),DEPTH)
for(y = 0; y < bltheight; y++) {
bitmask = 0x80 >> srcskipleft;
bits = *src++ ^ bits_xor;
d = dst + dstskipleft;
bits = cirrus_src(s, srcaddr++) ^ bits_xor;
addr = dstaddr + dstskipleft;
for (x = dstskipleft; x < bltwidth; x += (DEPTH / 8)) {
if ((bitmask & 0xff) == 0) {
bitmask = 0x80;
bits = *src++ ^ bits_xor;
bits = cirrus_src(s, srcaddr++) ^ bits_xor;
}
index = (bits & bitmask);
if (index) {
PUTPIXEL();
PUTPIXEL(s, addr, col);
}
d += (DEPTH / 8);
addr += (DEPTH / 8);
bitmask >>= 1;
}
dst += dstpitch;
dstaddr += dstpitch;
}
}
static void
glue(glue(glue(cirrus_colorexpand_, ROP_NAME), _),DEPTH)
(CirrusVGAState * s, uint8_t * dst,
const uint8_t * src,
(CirrusVGAState *s, uint32_t dstaddr,
uint32_t srcaddr,
int dstpitch, int srcpitch,
int bltwidth, int bltheight)
{
uint32_t colors[2];
uint8_t *d;
uint32_t addr;
int x, y;
unsigned bits;
unsigned int col;
@@ -160,30 +164,30 @@ glue(glue(glue(cirrus_colorexpand_, ROP_NAME), _),DEPTH)
colors[1] = s->cirrus_blt_fgcol;
for(y = 0; y < bltheight; y++) {
bitmask = 0x80 >> srcskipleft;
bits = *src++;
d = dst + dstskipleft;
bits = cirrus_src(s, srcaddr++);
addr = dstaddr + dstskipleft;
for (x = dstskipleft; x < bltwidth; x += (DEPTH / 8)) {
if ((bitmask & 0xff) == 0) {
bitmask = 0x80;
bits = *src++;
bits = cirrus_src(s, srcaddr++);
}
col = colors[!!(bits & bitmask)];
PUTPIXEL();
d += (DEPTH / 8);
PUTPIXEL(s, addr, col);
addr += (DEPTH / 8);
bitmask >>= 1;
}
dst += dstpitch;
dstaddr += dstpitch;
}
}
static void
glue(glue(glue(cirrus_colorexpand_pattern_transp_, ROP_NAME), _),DEPTH)
(CirrusVGAState * s, uint8_t * dst,
const uint8_t * src,
(CirrusVGAState *s, uint32_t dstaddr,
uint32_t srcaddr,
int dstpitch, int srcpitch,
int bltwidth, int bltheight)
{
uint8_t *d;
uint32_t addr;
int x, y, bitpos, pattern_y;
unsigned int bits, bits_xor;
unsigned int col;
@@ -205,30 +209,30 @@ glue(glue(glue(cirrus_colorexpand_pattern_transp_, ROP_NAME), _),DEPTH)
pattern_y = s->cirrus_blt_srcaddr & 7;
for(y = 0; y < bltheight; y++) {
bits = src[pattern_y] ^ bits_xor;
bits = cirrus_src(s, srcaddr + pattern_y) ^ bits_xor;
bitpos = 7 - srcskipleft;
d = dst + dstskipleft;
addr = dstaddr + dstskipleft;
for (x = dstskipleft; x < bltwidth; x += (DEPTH / 8)) {
if ((bits >> bitpos) & 1) {
PUTPIXEL();
PUTPIXEL(s, addr, col);
}
d += (DEPTH / 8);
addr += (DEPTH / 8);
bitpos = (bitpos - 1) & 7;
}
pattern_y = (pattern_y + 1) & 7;
dst += dstpitch;
dstaddr += dstpitch;
}
}
static void
glue(glue(glue(cirrus_colorexpand_pattern_, ROP_NAME), _),DEPTH)
(CirrusVGAState * s, uint8_t * dst,
const uint8_t * src,
(CirrusVGAState *s, uint32_t dstaddr,
uint32_t srcaddr,
int dstpitch, int srcpitch,
int bltwidth, int bltheight)
{
uint32_t colors[2];
uint8_t *d;
uint32_t addr;
int x, y, bitpos, pattern_y;
unsigned int bits;
unsigned int col;
@@ -240,40 +244,39 @@ glue(glue(glue(cirrus_colorexpand_pattern_, ROP_NAME), _),DEPTH)
pattern_y = s->cirrus_blt_srcaddr & 7;
for(y = 0; y < bltheight; y++) {
bits = src[pattern_y];
bits = cirrus_src(s, srcaddr + pattern_y);
bitpos = 7 - srcskipleft;
d = dst + dstskipleft;
addr = dstaddr + dstskipleft;
for (x = dstskipleft; x < bltwidth; x += (DEPTH / 8)) {
col = colors[(bits >> bitpos) & 1];
PUTPIXEL();
d += (DEPTH / 8);
PUTPIXEL(s, addr, col);
addr += (DEPTH / 8);
bitpos = (bitpos - 1) & 7;
}
pattern_y = (pattern_y + 1) & 7;
dst += dstpitch;
dstaddr += dstpitch;
}
}
static void
glue(glue(glue(cirrus_fill_, ROP_NAME), _),DEPTH)
(CirrusVGAState *s,
uint8_t *dst, int dst_pitch,
uint32_t dstaddr, int dst_pitch,
int width, int height)
{
uint8_t *d, *d1;
uint32_t addr;
uint32_t col;
int x, y;
col = s->cirrus_blt_fgcol;
d1 = dst;
for(y = 0; y < height; y++) {
d = d1;
addr = dstaddr;
for(x = 0; x < width; x += (DEPTH / 8)) {
PUTPIXEL();
d += (DEPTH / 8);
PUTPIXEL(s, addr, col);
addr += (DEPTH / 8);
}
d1 += dst_pitch;
dstaddr += dst_pitch;
}
}
+36 -1
View File
@@ -992,6 +992,34 @@ static uint32_t qxl_crc32(const uint8_t *p, unsigned len)
return crc32(0xffffffff, p, len) ^ 0xffffffff;
}
static bool qxl_rom_monitors_config_changed(QXLRom *rom,
VDAgentMonitorsConfig *monitors_config,
unsigned int max_outputs)
{
int i;
unsigned int monitors_count;
monitors_count = MIN(monitors_config->num_of_monitors, max_outputs);
if (rom->client_monitors_config.count != monitors_count) {
return true;
}
for (i = 0 ; i < rom->client_monitors_config.count ; ++i) {
VDAgentMonConfig *monitor = &monitors_config->monitors[i];
QXLURect *rect = &rom->client_monitors_config.heads[i];
/* monitor->depth ignored */
if ((rect->left != monitor->x) ||
(rect->top != monitor->y) ||
(rect->right != monitor->x + monitor->width) ||
(rect->bottom != monitor->y + monitor->height)) {
return true;
}
}
return false;
}
/* called from main context only */
static int interface_client_monitors_config(QXLInstance *sin,
VDAgentMonitorsConfig *monitors_config)
@@ -1000,6 +1028,7 @@ static int interface_client_monitors_config(QXLInstance *sin,
QXLRom *rom = memory_region_get_ram_ptr(&qxl->rom_bar);
int i;
unsigned max_outputs = ARRAY_SIZE(rom->client_monitors_config.heads);
bool config_changed = false;
if (qxl->revision < 4) {
trace_qxl_client_monitors_config_unsupported_by_device(qxl->id,
@@ -1030,6 +1059,10 @@ static int interface_client_monitors_config(QXLInstance *sin,
}
#endif
config_changed = qxl_rom_monitors_config_changed(rom,
monitors_config,
max_outputs);
memset(&rom->client_monitors_config, 0,
sizeof(rom->client_monitors_config));
rom->client_monitors_config.count = monitors_config->num_of_monitors;
@@ -1059,7 +1092,9 @@ static int interface_client_monitors_config(QXLInstance *sin,
trace_qxl_interrupt_client_monitors_config(qxl->id,
rom->client_monitors_config.count,
rom->client_monitors_config.heads);
qxl_send_events(qxl, QXL_INTERRUPT_CLIENT_MONITORS_CONFIG);
if (config_changed) {
qxl_send_events(qxl, QXL_INTERRUPT_CLIENT_MONITORS_CONFIG);
}
return 1;
}
+1
View File
@@ -347,6 +347,7 @@ static void virgl_cmd_get_capset_info(VirtIOGPU *g,
VIRTIO_GPU_FILL_CMD(info);
memset(&resp, 0, sizeof(resp));
if (info.capset_index == 0) {
resp.capset_id = VIRTIO_GPU_CAPSET_VIRGL;
virgl_renderer_get_cap_set(resp.capset_id,
+1
View File
@@ -84,6 +84,7 @@ static void update_cursor_data_virgl(VirtIOGPU *g,
if (width != s->current_cursor->width ||
height != s->current_cursor->height) {
free(data);
return;
}
+2 -2
View File
@@ -2860,7 +2860,7 @@ void acpi_build(AcpiBuildTables *tables, MachineState *machine)
*/
int legacy_aml_len =
pcmc->legacy_acpi_table_size +
ACPI_BUILD_LEGACY_CPU_AML_SIZE * max_cpus;
ACPI_BUILD_LEGACY_CPU_AML_SIZE * pcms->apic_id_limit;
int legacy_table_size =
ROUND_UP(tables_blob->len - aml_len + legacy_aml_len,
ACPI_BUILD_ALIGN_SIZE);
@@ -2936,7 +2936,7 @@ static MemoryRegion *acpi_add_rom_blob(AcpiBuildState *build_state,
uint64_t max_size)
{
return rom_add_blob(name, blob->data, acpi_data_len(blob), max_size, -1,
name, acpi_build_update, build_state);
name, acpi_build_update, build_state, NULL);
}
static const VMStateDescription vmstate_acpi_build = {
+1
View File
@@ -988,6 +988,7 @@ static void vtd_context_device_invalidate(IntelIOMMUState *s,
mask = 7; /* Mask bit 2:0 in the SID field */
break;
}
mask = ~mask;
VTD_DPRINTF(INV, "device-selective invalidation source 0x%"PRIx16
" mask %"PRIu16, source_id, mask);
vtd_bus = vtd_find_as_from_bus_num(s, VTD_SID_TO_BUS(source_id));
+4
View File
@@ -1251,6 +1251,7 @@ static int assigned_device_pci_cap_init(PCIDevice *pci_dev, Error **errp)
error_propagate(errp, local_err);
return -ENOTSUP;
}
dev->dev.cap_present |= QEMU_PCI_CAP_MSI;
dev->cap.available |= ASSIGNED_DEVICE_CAP_MSI;
/* Only 32-bit/no-mask currently supported */
ret = pci_add_capability2(pci_dev, PCI_CAP_ID_MSI, pos, 10,
@@ -1285,6 +1286,7 @@ static int assigned_device_pci_cap_init(PCIDevice *pci_dev, Error **errp)
error_propagate(errp, local_err);
return -ENOTSUP;
}
dev->dev.cap_present |= QEMU_PCI_CAP_MSIX;
dev->cap.available |= ASSIGNED_DEVICE_CAP_MSIX;
ret = pci_add_capability2(pci_dev, PCI_CAP_ID_MSIX, pos, 12,
&local_err);
@@ -1648,6 +1650,7 @@ static void assigned_dev_register_msix_mmio(AssignedDevice *dev, Error **errp)
dev->msix_table = NULL;
return;
}
dev->dev.msix_table = (uint8_t *)dev->msix_table;
assigned_dev_msix_reset(dev);
@@ -1665,6 +1668,7 @@ static void assigned_dev_unregister_msix_mmio(AssignedDevice *dev)
error_report("error unmapping msix_table! %s", strerror(errno));
}
dev->msix_table = NULL;
dev->dev.msix_table = NULL;
}
static const VMStateDescription vmstate_assigned_device = {
+15 -15
View File
@@ -744,6 +744,7 @@ static FWCfgState *bochs_bios_init(AddressSpace *as, PCMachineState *pcms)
int i, j;
fw_cfg = fw_cfg_init_io_dma(FW_CFG_IO_BASE, FW_CFG_IO_BASE + 4, as);
fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, pcms->boot_cpus);
/* FW_CFG_MAX_CPUS is a bit confusing/problematic on x86:
*
@@ -1226,7 +1227,7 @@ static void rtc_set_cpus_count(ISADevice *rtc, uint16_t cpus_count)
{
if (cpus_count > 0xff) {
/* If the number of CPUs can't be represented in 8 bits, the
* BIOS must use "etc/boot-cpus". Set RTC field to 0 just
* BIOS must use "FW_CFG_NB_CPUS". Set RTC field to 0 just
* to make old BIOSes fail more predictably.
*/
rtc_set_memory(rtc, 0x5f, 0);
@@ -1243,7 +1244,7 @@ void pc_machine_done(Notifier *notifier, void *data)
PCIBus *bus = pcms->bus;
/* set the number of CPUs */
rtc_set_cpus_count(pcms->rtc, le16_to_cpu(pcms->boot_cpus_le));
rtc_set_cpus_count(pcms->rtc, pcms->boot_cpus);
if (bus) {
int extra_hosts = 0;
@@ -1264,15 +1265,10 @@ void pc_machine_done(Notifier *notifier, void *data)
acpi_setup();
if (pcms->fw_cfg) {
MachineClass *mc = MACHINE_GET_CLASS(pcms);
pc_build_smbios(pcms->fw_cfg);
pc_build_feature_control_file(pcms);
if (mc->max_cpus > 255) {
fw_cfg_add_file(pcms->fw_cfg, "etc/boot-cpus", &pcms->boot_cpus_le,
sizeof(pcms->boot_cpus_le));
}
/* update FW_CFG_NB_CPUS to account for -device added CPUs */
fw_cfg_modify_i16(pcms->fw_cfg, FW_CFG_NB_CPUS, pcms->boot_cpus);
}
if (pcms->apic_id_limit > 255) {
@@ -1350,6 +1346,7 @@ void xen_load_linux(PCMachineState *pcms)
assert(MACHINE(pcms)->kernel_filename != NULL);
fw_cfg = fw_cfg_init_io(FW_CFG_IO_BASE);
fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, pcms->boot_cpus);
rom_set_fw(fw_cfg);
load_linux(pcms, fw_cfg);
@@ -1820,10 +1817,12 @@ static void pc_cpu_plug(HotplugHandler *hotplug_dev,
}
/* increment the number of CPUs */
pcms->boot_cpus_le = cpu_to_le16(le16_to_cpu(pcms->boot_cpus_le) + 1);
if (dev->hotplugged) {
/* Update the number of CPUs in CMOS */
rtc_set_cpus_count(pcms->rtc, le16_to_cpu(pcms->boot_cpus_le));
pcms->boot_cpus++;
if (pcms->rtc) {
rtc_set_cpus_count(pcms->rtc, pcms->boot_cpus);
}
if (pcms->fw_cfg) {
fw_cfg_modify_i16(pcms->fw_cfg, FW_CFG_NB_CPUS, pcms->boot_cpus);
}
found_cpu = pc_find_cpu_slot(pcms, CPU(dev), NULL);
@@ -1878,9 +1877,10 @@ static void pc_cpu_unplug_cb(HotplugHandler *hotplug_dev,
object_unparent(OBJECT(dev));
/* decrement the number of CPUs */
pcms->boot_cpus_le = cpu_to_le16(le16_to_cpu(pcms->boot_cpus_le) - 1);
pcms->boot_cpus--;
/* Update the number of CPUs in CMOS */
rtc_set_cpus_count(pcms->rtc, le16_to_cpu(pcms->boot_cpus_le));
rtc_set_cpus_count(pcms->rtc, pcms->boot_cpus);
fw_cfg_modify_i16(pcms->fw_cfg, FW_CFG_NB_CPUS, pcms->boot_cpus);
out:
error_propagate(errp, local_err);
}
+1 -1
View File
@@ -488,7 +488,7 @@ static void ahci_reg_init(AHCIState *s)
s->control_regs.cap = (s->ports - 1) |
(AHCI_NUM_COMMAND_SLOTS << 8) |
(AHCI_SUPPORTED_SPEED_GEN1 << AHCI_SUPPORTED_SPEED) |
HOST_CAP_NCQ | HOST_CAP_AHCI;
HOST_CAP_NCQ | HOST_CAP_AHCI | HOST_CAP_64;
s->control_regs.impl = (1 << s->ports) - 1;
+2
View File
@@ -250,6 +250,8 @@ static void apic_reset_common(DeviceState *dev)
s->apicbase = APIC_DEFAULT_ADDRESS | bsp | MSR_IA32_APICBASE_ENABLE;
s->id = s->initial_apic_id;
apic_reset_irq_delivered();
s->vapic_paddr = 0;
info->vapic_base_update(s);
+5
View File
@@ -426,6 +426,11 @@ static void ioapic_class_init(ObjectClass *klass, void *data)
DeviceClass *dc = DEVICE_CLASS(klass);
k->realize = ioapic_realize;
/*
* If APIC is in kernel, we need to update the kernel cache after
* migration, otherwise first 24 gsi routes will be invalid.
*/
k->post_load = ioapic_update_kvm_routes;
dc->reset = ioapic_reset_common;
dc->props = ioapic_properties;
}
+2 -4
View File
@@ -433,10 +433,8 @@ const VMStateDescription vmstate_ISAIPMIKCSDevice = {
VMSTATE_BOOL(kcs.use_irq, ISAIPMIKCSDevice),
VMSTATE_BOOL(kcs.irqs_enabled, ISAIPMIKCSDevice),
VMSTATE_UINT32(kcs.outpos, ISAIPMIKCSDevice),
VMSTATE_VBUFFER_UINT32(kcs.outmsg, ISAIPMIKCSDevice, 1, NULL, 0,
kcs.outlen),
VMSTATE_VBUFFER_UINT32(kcs.inmsg, ISAIPMIKCSDevice, 1, NULL, 0,
kcs.inlen),
VMSTATE_UINT8_ARRAY(kcs.outmsg, ISAIPMIKCSDevice, MAX_IPMI_MSG_SIZE),
VMSTATE_UINT8_ARRAY(kcs.inmsg, ISAIPMIKCSDevice, MAX_IPMI_MSG_SIZE),
VMSTATE_BOOL(kcs.write_end, ISAIPMIKCSDevice),
VMSTATE_UINT8(kcs.status_reg, ISAIPMIKCSDevice),
VMSTATE_UINT8(kcs.data_out_reg, ISAIPMIKCSDevice),
+1 -1
View File
@@ -75,7 +75,7 @@ static inline void hwsetup_create_rom(HWSetup *hw,
hwaddr base)
{
rom_add_blob("hwsetup", hw->data, TARGET_PAGE_SIZE,
TARGET_PAGE_SIZE, base, NULL, NULL, NULL);
TARGET_PAGE_SIZE, base, NULL, NULL, NULL, NULL);
}
static inline void hwsetup_add_u8(HWSetup *hw, uint8_t u)
+3 -1
View File
@@ -858,7 +858,7 @@ static void ivshmem_common_realize(PCIDevice *dev, Error **errp)
pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY,
&s->ivshmem_mmio);
if (!s->not_legacy_32bit) {
if (s->not_legacy_32bit) {
attr |= PCI_BASE_ADDRESS_MEM_TYPE_64;
}
@@ -1045,6 +1045,7 @@ static void ivshmem_plain_init(Object *obj)
ivshmem_check_memdev_is_busy,
OBJ_PROP_LINK_UNREF_ON_RELEASE,
&error_abort);
s->not_legacy_32bit = 1;
}
static void ivshmem_plain_realize(PCIDevice *dev, Error **errp)
@@ -1116,6 +1117,7 @@ static void ivshmem_doorbell_init(Object *obj)
s->features |= (1 << IVSHMEM_MSI);
s->legacy_size = SIZE_MAX; /* whatever the server sends */
s->not_legacy_32bit = 1;
}
static void ivshmem_doorbell_realize(PCIDevice *dev, Error **errp)
+1 -1
View File
@@ -306,7 +306,7 @@ e1000e_init_msix(E1000EState *s)
static void
e1000e_cleanup_msix(E1000EState *s)
{
if (msix_enabled(PCI_DEVICE(s))) {
if (msix_present(PCI_DEVICE(s))) {
e1000e_unuse_msix_vectors(s, E1000E_MSIX_VEC_NUM);
msix_uninit(PCI_DEVICE(s), &s->msix, &s->msix);
}
+2 -2
View File
@@ -348,8 +348,8 @@ static ssize_t etsec_receive(NetClientState *nc,
eTSEC *etsec = qemu_get_nic_opaque(nc);
#if defined(HEX_DUMP)
fprintf(stderr, "%s receive size:%d\n", etsec->nic->nc.name, size);
qemu_hexdump(buf, stderr, "", size);
fprintf(stderr, "%s receive size:%zd\n", nc->name, size);
qemu_hexdump((void *)buf, stderr, "", size);
#endif
/* Flush is unnecessary as are already in receiving path */
etsec->need_flush = false;
+8
View File
@@ -474,6 +474,14 @@ static void rx_init_frame(eTSEC *etsec, const uint8_t *buf, size_t size)
/* CRC padding (We don't have to compute the CRC) */
etsec->rx_padding = 4;
/*
* Ensure that payload length + CRC length is at least 802.3
* minimum MTU size bytes long (64)
*/
if (etsec->rx_buffer_len < 60) {
etsec->rx_padding += 60 - etsec->rx_buffer_len;
}
etsec->rx_first_in_frame = 1;
etsec->rx_remaining_data = etsec->rx_buffer_len;
RING_DEBUG("%s: rx_buffer_len:%u rx_padding+crc:%u\n", __func__,
+1 -1
View File
@@ -393,7 +393,7 @@ static void mcf_fec_write(void *opaque, hwaddr addr,
s->tx_descriptor = s->etdsr;
break;
case 0x188:
s->emrbr = value & 0x7f0;
s->emrbr = value > 0 ? value & 0x7F0 : 0x7F0;
break;
default:
hw_error("mcf_fec_write Bad address 0x%x\n", (int)addr);
+19 -18
View File
@@ -23,13 +23,13 @@
struct NetRxPkt {
struct virtio_net_hdr virt_hdr;
uint8_t ehdr_buf[sizeof(struct eth_header)];
uint8_t ehdr_buf[sizeof(struct eth_header) + sizeof(struct vlan_header)];
struct iovec *vec;
uint16_t vec_len_total;
uint16_t vec_len;
uint32_t tot_len;
uint16_t tci;
bool vlan_stripped;
size_t ehdr_buf_len;
bool has_virt_hdr;
eth_pkt_types_e packet_type;
@@ -88,17 +88,16 @@ net_rx_pkt_pull_data(struct NetRxPkt *pkt,
const struct iovec *iov, int iovcnt,
size_t ploff)
{
if (pkt->vlan_stripped) {
if (pkt->ehdr_buf_len) {
net_rx_pkt_iovec_realloc(pkt, iovcnt + 1);
pkt->vec[0].iov_base = pkt->ehdr_buf;
pkt->vec[0].iov_len = sizeof(pkt->ehdr_buf);
pkt->tot_len =
iov_size(iov, iovcnt) - ploff + sizeof(struct eth_header);
pkt->vec[0].iov_len = pkt->ehdr_buf_len;
pkt->tot_len = iov_size(iov, iovcnt) - ploff + pkt->ehdr_buf_len;
pkt->vec_len = iov_copy(pkt->vec + 1, pkt->vec_len_total - 1,
iov, iovcnt, ploff, pkt->tot_len);
iov, iovcnt, ploff,
pkt->tot_len - pkt->ehdr_buf_len) + 1;
} else {
net_rx_pkt_iovec_realloc(pkt, iovcnt);
@@ -123,11 +122,12 @@ void net_rx_pkt_attach_iovec(struct NetRxPkt *pkt,
uint16_t tci = 0;
uint16_t ploff = iovoff;
assert(pkt);
pkt->vlan_stripped = false;
if (strip_vlan) {
pkt->vlan_stripped = eth_strip_vlan(iov, iovcnt, iovoff, pkt->ehdr_buf,
&ploff, &tci);
pkt->ehdr_buf_len = eth_strip_vlan(iov, iovcnt, iovoff, pkt->ehdr_buf,
&ploff, &tci);
} else {
pkt->ehdr_buf_len = 0;
}
pkt->tci = tci;
@@ -143,12 +143,13 @@ void net_rx_pkt_attach_iovec_ex(struct NetRxPkt *pkt,
uint16_t tci = 0;
uint16_t ploff = iovoff;
assert(pkt);
pkt->vlan_stripped = false;
if (strip_vlan) {
pkt->vlan_stripped = eth_strip_vlan_ex(iov, iovcnt, iovoff, vet,
pkt->ehdr_buf,
&ploff, &tci);
pkt->ehdr_buf_len = eth_strip_vlan_ex(iov, iovcnt, iovoff, vet,
pkt->ehdr_buf,
&ploff, &tci);
} else {
pkt->ehdr_buf_len = 0;
}
pkt->tci = tci;
@@ -162,8 +163,8 @@ void net_rx_pkt_dump(struct NetRxPkt *pkt)
NetRxPkt *pkt = (NetRxPkt *)pkt;
assert(pkt);
printf("RX PKT: tot_len: %d, vlan_stripped: %d, vlan_tag: %d\n",
pkt->tot_len, pkt->vlan_stripped, pkt->tci);
printf("RX PKT: tot_len: %d, ehdr_buf_len: %lu, vlan_tag: %d\n",
pkt->tot_len, pkt->ehdr_buf_len, pkt->tci);
#endif
}
@@ -426,7 +427,7 @@ bool net_rx_pkt_is_vlan_stripped(struct NetRxPkt *pkt)
{
assert(pkt);
return pkt->vlan_stripped;
return pkt->ehdr_buf_len ? true : false;
}
bool net_rx_pkt_has_virt_hdr(struct NetRxPkt *pkt)
-1
View File
@@ -884,7 +884,6 @@ static void fw_cfg_init1(DeviceState *dev)
fw_cfg_add_bytes(s, FW_CFG_SIGNATURE, (char *)"QEMU", 4);
fw_cfg_add_bytes(s, FW_CFG_UUID, &qemu_uuid, 16);
fw_cfg_add_i16(s, FW_CFG_NOGRAPHIC, (uint16_t)!machine->enable_graphics);
fw_cfg_add_i16(s, FW_CFG_NB_CPUS, (uint16_t)smp_cpus);
fw_cfg_add_i16(s, FW_CFG_BOOT_MENU, (uint16_t)boot_menu);
fw_cfg_bootsplash(s);
fw_cfg_reboot(s);
+1 -3
View File
@@ -62,9 +62,7 @@ typedef struct UNINState {
static int pci_unin_map_irq(PCIDevice *pci_dev, int irq_num)
{
int devfn = pci_dev->devfn & 0x00FFFFFF;
return (((devfn >> 11) & 0x1F) + irq_num) & 3;
return (irq_num + (pci_dev->devfn >> 3)) & 3;
}
static void pci_unin_set_irq(void *opaque, int irq_num, int level)
+2 -2
View File
@@ -982,8 +982,8 @@ static PCIDevice *do_pci_register_device(PCIDevice *pci_dev, PCIBus *bus,
pci_get_function_0(pci_dev)) {
error_setg(errp, "PCI: slot %d function 0 already ocuppied by %s,"
" new func %s cannot be exposed to guest.",
PCI_SLOT(devfn),
bus->devices[PCI_DEVFN(PCI_SLOT(devfn), 0)]->name,
PCI_SLOT(pci_get_function_0(pci_dev)->devfn),
pci_get_function_0(pci_dev)->name,
name);
return NULL;
+1
View File
@@ -466,6 +466,7 @@ static void ppc_core99_init(MachineState *machine)
/* No PCI init: the BIOS will do it */
fw_cfg = fw_cfg_init_mem(CFG_ADDR, CFG_ADDR + 2);
fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, (uint16_t)smp_cpus);
fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)max_cpus);
fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, machine_arch);
+1
View File
@@ -319,6 +319,7 @@ static void ppc_heathrow_init(MachineState *machine)
/* No PCI init: the BIOS will do it */
fw_cfg = fw_cfg_init_mem(CFG_ADDR, CFG_ADDR + 2);
fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, (uint16_t)smp_cpus);
fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)max_cpus);
fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, ARCH_HEATHROW);
+81
View File
@@ -1267,6 +1267,68 @@ static bool version_before_3(void *opaque, int version_id)
return version_id < 3;
}
static bool spapr_ov5_cas_needed(void *opaque)
{
sPAPRMachineState *spapr = opaque;
sPAPROptionVector *ov5_mask = spapr_ovec_new();
sPAPROptionVector *ov5_legacy = spapr_ovec_new();
sPAPROptionVector *ov5_removed = spapr_ovec_new();
bool cas_needed;
/* Prior to the introduction of sPAPROptionVector, we had two option
* vectors we dealt with: OV5_FORM1_AFFINITY, and OV5_DRCONF_MEMORY.
* Both of these options encode machine topology into the device-tree
* in such a way that the now-booted OS should still be able to interact
* appropriately with QEMU regardless of what options were actually
* negotiatied on the source side.
*
* As such, we can avoid migrating the CAS-negotiated options if these
* are the only options available on the current machine/platform.
* Since these are the only options available for pseries-2.7 and
* earlier, this allows us to maintain old->new/new->old migration
* compatibility.
*
* For QEMU 2.8+, there are additional CAS-negotiatable options available
* via default pseries-2.8 machines and explicit command-line parameters.
* Some of these options, like OV5_HP_EVT, *do* require QEMU to be aware
* of the actual CAS-negotiated values to continue working properly. For
* example, availability of memory unplug depends on knowing whether
* OV5_HP_EVT was negotiated via CAS.
*
* Thus, for any cases where the set of available CAS-negotiatable
* options extends beyond OV5_FORM1_AFFINITY and OV5_DRCONF_MEMORY, we
* include the CAS-negotiated options in the migration stream.
*/
spapr_ovec_set(ov5_mask, OV5_FORM1_AFFINITY);
spapr_ovec_set(ov5_mask, OV5_DRCONF_MEMORY);
/* spapr_ovec_diff returns true if bits were removed. we avoid using
* the mask itself since in the future it's possible "legacy" bits may be
* removed via machine options, which could generate a false positive
* that breaks migration.
*/
spapr_ovec_intersect(ov5_legacy, spapr->ov5, ov5_mask);
cas_needed = spapr_ovec_diff(ov5_removed, spapr->ov5, ov5_legacy);
spapr_ovec_cleanup(ov5_mask);
spapr_ovec_cleanup(ov5_legacy);
spapr_ovec_cleanup(ov5_removed);
return cas_needed;
}
static const VMStateDescription vmstate_spapr_ov5_cas = {
.name = "spapr_option_vector_ov5_cas",
.version_id = 1,
.minimum_version_id = 1,
.needed = spapr_ov5_cas_needed,
.fields = (VMStateField[]) {
VMSTATE_STRUCT_POINTER_V(ov5_cas, sPAPRMachineState, 1,
vmstate_spapr_ovec, sPAPROptionVector),
VMSTATE_END_OF_LIST()
},
};
static const VMStateDescription vmstate_spapr = {
.name = "spapr",
.version_id = 3,
@@ -1282,6 +1344,10 @@ static const VMStateDescription vmstate_spapr = {
VMSTATE_PPC_TIMEBASE_V(tb, sPAPRMachineState, 2),
VMSTATE_END_OF_LIST()
},
.subsections = (const VMStateDescription*[]) {
&vmstate_spapr_ov5_cas,
NULL
}
};
static int htab_save_setup(QEMUFile *f, void *opaque)
@@ -2224,6 +2290,11 @@ static void spapr_add_lmbs(DeviceState *dev, uint64_t addr_start, uint64_t size,
drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc);
drck->attach(drc, dev, fdt, fdt_offset, !dev->hotplugged, errp);
addr += SPAPR_MEMORY_BLOCK_SIZE;
if (!dev->hotplugged) {
/* guests expect coldplugged LMBs to be pre-allocated */
drck->set_allocation_state(drc, SPAPR_DR_ALLOCATION_STATE_USABLE);
drck->set_isolation_state(drc, SPAPR_DR_ISOLATION_STATE_UNISOLATED);
}
}
/* send hotplug notification to the
* guest only in case of hotplugged memory
@@ -2701,6 +2772,16 @@ DEFINE_SPAPR_MACHINE(2_8, "2.8", true);
.driver = TYPE_SPAPR_PCI_HOST_BRIDGE, \
.property = "mem64_win_size", \
.value = "0", \
}, \
{ \
.driver = TYPE_POWERPC_CPU, \
.property = "pre-2.8-migration", \
.value = "on", \
}, \
{ \
.driver = TYPE_SPAPR_PCI_HOST_BRIDGE, \
.property = "pre-2.8-migration", \
.value = "on", \
},
static void phb_placement_2_7(sPAPRMachineState *spapr, uint32_t index,
+13 -1
View File
@@ -37,6 +37,17 @@
*/
struct sPAPROptionVector {
unsigned long *bitmap;
int32_t bitmap_size; /* only used for migration */
};
const VMStateDescription vmstate_spapr_ovec = {
.name = "spapr_option_vector",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_BITMAP(bitmap, sPAPROptionVector, 1, bitmap_size),
VMSTATE_END_OF_LIST()
}
};
sPAPROptionVector *spapr_ovec_new(void)
@@ -45,6 +56,7 @@ sPAPROptionVector *spapr_ovec_new(void)
ov = g_new0(sPAPROptionVector, 1);
ov->bitmap = bitmap_new(OV_MAXBITS);
ov->bitmap_size = OV_MAXBITS;
return ov;
}
@@ -238,5 +250,5 @@ int spapr_ovec_populate_dt(void *fdt, int fdt_offset,
}
}
return fdt_setprop(fdt, fdt_offset, name, vec, vec_len);
return fdt_setprop(fdt, fdt_offset, name, vec, vec_len + 1);
}
+26 -9
View File
@@ -1590,6 +1590,8 @@ static Property spapr_phb_properties[] = {
DEFINE_PROP_UINT64("pgsz", sPAPRPHBState, page_size_mask,
(1ULL << 12) | (1ULL << 16)),
DEFINE_PROP_UINT32("numa_node", sPAPRPHBState, numa_node, -1),
DEFINE_PROP_BOOL("pre-2.8-migration", sPAPRPHBState,
pre_2_8_migration, false),
DEFINE_PROP_END_OF_LIST(),
};
@@ -1636,6 +1638,20 @@ static void spapr_pci_pre_save(void *opaque)
sphb->msi_devs[i].key = *(uint32_t *) key;
sphb->msi_devs[i].value = *(spapr_pci_msi *) value;
}
if (sphb->pre_2_8_migration) {
sphb->mig_liobn = sphb->dma_liobn[0];
sphb->mig_mem_win_addr = sphb->mem_win_addr;
sphb->mig_mem_win_size = sphb->mem_win_size;
sphb->mig_io_win_addr = sphb->io_win_addr;
sphb->mig_io_win_size = sphb->io_win_size;
if ((sphb->mem64_win_size != 0)
&& (sphb->mem64_win_addr
== (sphb->mem_win_addr + sphb->mem_win_size))) {
sphb->mig_mem_win_size += sphb->mem64_win_size;
}
}
}
static int spapr_pci_post_load(void *opaque, int version_id)
@@ -1658,25 +1674,26 @@ static int spapr_pci_post_load(void *opaque, int version_id)
return 0;
}
static bool version_before_3(void *opaque, int version_id)
static bool pre_2_8_migration(void *opaque, int version_id)
{
return version_id < 3;
sPAPRPHBState *sphb = opaque;
return sphb->pre_2_8_migration;
}
static const VMStateDescription vmstate_spapr_pci = {
.name = "spapr_pci",
.version_id = 3,
.version_id = 2,
.minimum_version_id = 2,
.pre_save = spapr_pci_pre_save,
.post_load = spapr_pci_post_load,
.fields = (VMStateField[]) {
VMSTATE_UINT64_EQUAL(buid, sPAPRPHBState),
VMSTATE_UNUSED_TEST(version_before_3,
sizeof(uint32_t) /* dma_liobn[0] */
+ sizeof(uint64_t) /* mem_win_addr */
+ sizeof(uint64_t) /* mem_win_size */
+ sizeof(uint64_t) /* io_win_addr */
+ sizeof(uint64_t) /* io_win_size */),
VMSTATE_UINT32_TEST(mig_liobn, sPAPRPHBState, pre_2_8_migration),
VMSTATE_UINT64_TEST(mig_mem_win_addr, sPAPRPHBState, pre_2_8_migration),
VMSTATE_UINT64_TEST(mig_mem_win_size, sPAPRPHBState, pre_2_8_migration),
VMSTATE_UINT64_TEST(mig_io_win_addr, sPAPRPHBState, pre_2_8_migration),
VMSTATE_UINT64_TEST(mig_io_win_size, sPAPRPHBState, pre_2_8_migration),
VMSTATE_STRUCT_ARRAY(lsi_table, sPAPRPHBState, PCI_NUM_PINS, 0,
vmstate_spapr_pci_lsi, struct spapr_pci_lsi),
VMSTATE_INT32(msi_devs_num, sPAPRPHBState),
+15
View File
@@ -1672,12 +1672,27 @@ void subch_device_save(SubchDev *s, QEMUFile *f)
int subch_device_load(SubchDev *s, QEMUFile *f)
{
SubchDev *old_s;
uint16_t old_schid = s->schid;
int i;
s->cssid = qemu_get_byte(f);
s->ssid = qemu_get_byte(f);
s->schid = qemu_get_be16(f);
s->devno = qemu_get_be16(f);
/* Re-assign subch. */
if (old_schid != s->schid) {
old_s = channel_subsys.css[s->cssid]->sch_set[s->ssid]->sch[old_schid];
/*
* (old_s != s) means that some other device has its correct
* subchannel already assigned (in load).
*/
if (old_s == s) {
css_subch_assign(s->cssid, s->ssid, old_schid, s->devno, NULL);
}
/* It's OK to re-assign without a prior de-assign. */
css_subch_assign(s->cssid, s->ssid, s->schid, s->devno, s);
}
s->thinint_active = qemu_get_byte(f);
/* SCHIB */
/* PMCW */
+1 -1
View File
@@ -204,8 +204,8 @@ void s390_machine_reset(void)
{
S390CPU *ipl_cpu = S390_CPU(qemu_get_cpu(0));
qemu_devices_reset();
s390_cmma_reset();
qemu_devices_reset();
s390_crypto_reset();
/* all cpus are stopped - configure and start the ipl cpu only */
-2
View File
@@ -406,11 +406,9 @@ uint64_t esp_reg_read(ESPState *s, uint32_t saddr)
/* Data out. */
qemu_log_mask(LOG_UNIMP, "esp: PIO data read not implemented\n");
s->rregs[ESP_FIFO] = 0;
esp_raise_irq(s);
} else if (s->ti_rptr < s->ti_wptr) {
s->ti_size--;
s->rregs[ESP_FIFO] = s->ti_buf[s->ti_rptr++];
esp_raise_irq(s);
}
if (s->ti_rptr == s->ti_wptr) {
s->ti_rptr = 0;
+32 -26
View File
@@ -300,12 +300,6 @@ unmap:
return iov_count - i;
}
static void megasas_unmap_sgl(MegasasCmd *cmd)
{
qemu_sglist_destroy(&cmd->qsg);
cmd->iov_offset = 0;
}
/*
* passthrough sense and io sense are at the same offset
*/
@@ -461,9 +455,12 @@ static void megasas_unmap_frame(MegasasState *s, MegasasCmd *cmd)
{
PCIDevice *p = PCI_DEVICE(s);
pci_dma_unmap(p, cmd->frame, cmd->pa_size, 0, 0);
if (cmd->pa_size) {
pci_dma_unmap(p, cmd->frame, cmd->pa_size, 0, 0);
}
cmd->frame = NULL;
cmd->pa = 0;
cmd->pa_size = 0;
clear_bit(cmd->index, s->frame_map);
}
@@ -577,6 +574,20 @@ static void megasas_complete_frame(MegasasState *s, uint64_t context)
}
}
static void megasas_complete_command(MegasasCmd *cmd)
{
qemu_sglist_destroy(&cmd->qsg);
cmd->iov_size = 0;
cmd->iov_offset = 0;
cmd->req->hba_private = NULL;
scsi_req_unref(cmd->req);
cmd->req = NULL;
megasas_unmap_frame(cmd->state, cmd);
megasas_complete_frame(cmd->state, cmd->context);
}
static void megasas_reset_frames(MegasasState *s)
{
int i;
@@ -593,9 +604,9 @@ static void megasas_reset_frames(MegasasState *s)
static void megasas_abort_command(MegasasCmd *cmd)
{
if (cmd->req) {
/* Never abort internal commands. */
if (cmd->req != NULL) {
scsi_req_cancel(cmd->req);
cmd->req = NULL;
}
}
@@ -686,9 +697,6 @@ static void megasas_finish_dcmd(MegasasCmd *cmd, uint32_t iov_size)
{
trace_megasas_finish_dcmd(cmd->index, iov_size);
if (cmd->frame->header.sge_count) {
qemu_sglist_destroy(&cmd->qsg);
}
if (iov_size > cmd->iov_size) {
if (megasas_frame_is_ieee_sgl(cmd)) {
cmd->frame->dcmd.sgl.sg_skinny->len = cpu_to_le32(iov_size);
@@ -698,7 +706,6 @@ static void megasas_finish_dcmd(MegasasCmd *cmd, uint32_t iov_size)
cmd->frame->dcmd.sgl.sg32->len = cpu_to_le32(iov_size);
}
}
cmd->iov_size = 0;
}
static int megasas_ctrl_get_info(MegasasState *s, MegasasCmd *cmd)
@@ -1586,7 +1593,6 @@ static int megasas_finish_internal_dcmd(MegasasCmd *cmd,
int lun = req->lun;
opcode = le32_to_cpu(cmd->frame->dcmd.opcode);
scsi_req_unref(req);
trace_megasas_dcmd_internal_finish(cmd->index, opcode, lun);
switch (opcode) {
case MFI_DCMD_PD_GET_INFO:
@@ -1857,7 +1863,11 @@ static void megasas_command_complete(SCSIRequest *req, uint32_t status,
trace_megasas_command_complete(cmd->index, status, resid);
if (cmd->req != req) {
if (req->io_canceled) {
return;
}
if (cmd->req == NULL) {
/*
* Internal command complete
*/
@@ -1876,25 +1886,21 @@ static void megasas_command_complete(SCSIRequest *req, uint32_t status,
megasas_copy_sense(cmd);
}
megasas_unmap_sgl(cmd);
cmd->frame->header.scsi_status = req->status;
scsi_req_unref(cmd->req);
cmd->req = NULL;
}
cmd->frame->header.cmd_status = cmd_status;
megasas_unmap_frame(cmd->state, cmd);
megasas_complete_frame(cmd->state, cmd->context);
megasas_complete_command(cmd);
}
static void megasas_command_cancel(SCSIRequest *req)
static void megasas_command_cancelled(SCSIRequest *req)
{
MegasasCmd *cmd = req->hba_private;
if (cmd) {
megasas_abort_command(cmd);
} else {
scsi_req_unref(req);
if (!cmd) {
return;
}
cmd->frame->header.cmd_status = MFI_STAT_SCSI_IO_FAILED;
megasas_complete_command(cmd);
}
static int megasas_handle_abort(MegasasState *s, MegasasCmd *cmd)
@@ -2313,7 +2319,7 @@ static const struct SCSIBusInfo megasas_scsi_info = {
.transfer_data = megasas_xfer_complete,
.get_sg_list = megasas_get_sg_list,
.complete = megasas_command_complete,
.cancel = megasas_command_cancel,
.cancel = megasas_command_cancelled,
};
static void megasas_scsi_realize(PCIDevice *dev, Error **errp)
+3 -3
View File
@@ -756,7 +756,7 @@ static void mptsas_fetch_request(MPTSASState *s)
/* Read the message header from the guest first. */
addr = s->host_mfa_high_addr | MPTSAS_FIFO_GET(s, request_post);
pci_dma_read(pci, addr, req, sizeof(hdr));
pci_dma_read(pci, addr, req, sizeof(*hdr));
if (hdr->Function < ARRAY_SIZE(mpi_request_sizes) &&
mpi_request_sizes[hdr->Function]) {
@@ -766,8 +766,8 @@ static void mptsas_fetch_request(MPTSASState *s)
*/
size = mpi_request_sizes[hdr->Function];
assert(size <= MPTSAS_MAX_REQUEST_SIZE);
pci_dma_read(pci, addr + sizeof(hdr), &req[sizeof(hdr)],
size - sizeof(hdr));
pci_dma_read(pci, addr + sizeof(*hdr), &req[sizeof(*hdr)],
size - sizeof(*hdr));
}
if (hdr->Function == MPI_FUNCTION_SCSI_IO_REQUEST) {
+1 -1
View File
@@ -2694,7 +2694,7 @@ static bool scsi_block_is_passthrough(SCSIDiskState *s, uint8_t *buf)
* for the number of logical blocks specified in the length
* field). For other modes, do not use scatter/gather operation.
*/
if ((buf[1] & 6) != 2) {
if ((buf[1] & 6) == 2) {
return false;
}
break;
-7
View File
@@ -95,13 +95,6 @@ static int virtio_scsi_vring_init(VirtIOSCSI *s, VirtQueue *vq, int n,
return 0;
}
void virtio_scsi_dataplane_notify(VirtIODevice *vdev, VirtIOSCSIReq *req)
{
if (virtio_should_notify(vdev, req->vq)) {
event_notifier_set(virtio_queue_get_guest_notifier(req->vq));
}
}
/* assumes s->ctx held */
static void virtio_scsi_clear_aio(VirtIOSCSI *s)
{
+1 -1
View File
@@ -69,7 +69,7 @@ static void virtio_scsi_complete_req(VirtIOSCSIReq *req)
qemu_iovec_from_buf(&req->resp_iov, 0, &req->resp, req->resp_size);
virtqueue_push(vq, &req->elem, req->qsgl.size + req->resp_iov.size);
if (s->dataplane_started && !s->dataplane_fenced) {
virtio_scsi_dataplane_notify(vdev, req);
virtio_notify_irqfd(vdev, vq);
} else {
virtio_notify(vdev, vq);
}
+1 -1
View File
@@ -536,7 +536,7 @@ static void sdhci_sdma_transfer_multi_blocks(SDHCIState *s)
boundary_count -= block_size - begin;
}
dma_memory_read(&address_space_memory, s->sdmasysad,
&s->fifo_buffer[begin], s->data_count);
&s->fifo_buffer[begin], s->data_count - begin);
s->sdmasysad += s->data_count - begin;
if (s->data_count == block_size) {
for (n = 0; n < block_size; n++) {
+1
View File
@@ -1033,6 +1033,7 @@ static void sun4m_hw_init(const struct sun4m_hwdef *hwdef,
hwdef->ecc_version);
fw_cfg = fw_cfg_init_mem(CFG_ADDR, CFG_ADDR + 2);
fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, (uint16_t)smp_cpus);
fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)max_cpus);
fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, hwdef->machine_id);
+1
View File
@@ -855,6 +855,7 @@ static void sun4uv_init(MemoryRegion *address_space_mem,
(uint8_t *)&nd_table[0].macaddr);
fw_cfg = fw_cfg_init_io(BIOS_CFG_IOPORT);
fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, (uint16_t)smp_cpus);
fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)max_cpus);
fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, hwdef->machine_id);
+10 -13
View File
@@ -712,15 +712,10 @@ static void usbback_portid_detach(struct usbback_info *usbif, unsigned port)
static void usbback_portid_remove(struct usbback_info *usbif, unsigned port)
{
USBPort *p;
if (!usbif->ports[port - 1].dev) {
return;
}
p = &(usbif->ports[port - 1].port);
snprintf(p->path, sizeof(p->path), "%d", 99);
object_unparent(OBJECT(usbif->ports[port - 1].dev));
usbif->ports[port - 1].dev = NULL;
usbback_portid_detach(usbif, port);
@@ -733,10 +728,10 @@ static void usbback_portid_add(struct usbback_info *usbif, unsigned port,
{
unsigned speed;
char *portname;
USBPort *p;
Error *local_err = NULL;
QDict *qdict;
QemuOpts *opts;
char *tmp;
if (usbif->ports[port - 1].dev) {
return;
@@ -749,11 +744,16 @@ static void usbback_portid_add(struct usbback_info *usbif, unsigned port,
return;
}
portname++;
p = &(usbif->ports[port - 1].port);
snprintf(p->path, sizeof(p->path), "%s", portname);
qdict = qdict_new();
qdict_put(qdict, "driver", qstring_from_str("usb-host"));
tmp = g_strdup_printf("%s.0", usbif->xendev.qdev.id);
qdict_put(qdict, "bus", qstring_from_str(tmp));
g_free(tmp);
tmp = g_strdup_printf("%s-%u", usbif->xendev.qdev.id, port);
qdict_put(qdict, "id", qstring_from_str(tmp));
g_free(tmp);
qdict_put(qdict, "port", qint_from_int(port));
qdict_put(qdict, "hostbus", qint_from_int(atoi(busid)));
qdict_put(qdict, "hostport", qstring_from_str(portname));
opts = qemu_opts_from_qdict(qemu_find_opts("device"), qdict, &local_err);
@@ -765,7 +765,6 @@ static void usbback_portid_add(struct usbback_info *usbif, unsigned port,
goto err;
}
QDECREF(qdict);
snprintf(p->path, sizeof(p->path), "%d", port);
speed = usbif->ports[port - 1].dev->speed;
switch (speed) {
case USB_SPEED_LOW:
@@ -799,7 +798,6 @@ static void usbback_portid_add(struct usbback_info *usbif, unsigned port,
err:
QDECREF(qdict);
snprintf(p->path, sizeof(p->path), "%d", 99);
xen_pv_printf(&usbif->xendev, 0, "device %s could not be opened\n", busid);
}
@@ -1012,13 +1010,13 @@ static void usbback_alloc(struct XenDevice *xendev)
usbif = container_of(xendev, struct usbback_info, xendev);
usb_bus_new(&usbif->bus, sizeof(usbif->bus), &xen_usb_bus_ops, xen_sysdev);
usb_bus_new(&usbif->bus, sizeof(usbif->bus), &xen_usb_bus_ops,
DEVICE(&xendev->qdev));
for (i = 0; i < USBBACK_MAXPORTS; i++) {
p = &(usbif->ports[i].port);
usb_register_port(&usbif->bus, p, usbif, i, &xen_usb_port_ops,
USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL |
USB_SPEED_MASK_HIGH);
snprintf(p->path, sizeof(p->path), "%d", 99);
}
QTAILQ_INIT(&usbif->req_free_q);
@@ -1066,7 +1064,6 @@ static int usbback_free(struct XenDevice *xendev)
}
usb_bus_release(&usbif->bus);
object_unparent(OBJECT(&usbif->bus));
TR_BUS(xendev, "finished\n");
+3 -1
View File
@@ -5,7 +5,7 @@ virtqueue_fill(void *vq, const void *elem, unsigned int len, unsigned int idx) "
virtqueue_flush(void *vq, unsigned int count) "vq %p count %u"
virtqueue_pop(void *vq, void *elem, unsigned int in_num, unsigned int out_num) "vq %p elem %p in_num %u out_num %u"
virtio_queue_notify(void *vdev, int n, void *vq) "vdev %p n %d vq %p"
virtio_irq(void *vq) "vq %p"
virtio_notify_irqfd(void *vdev, void *vq) "vdev %p vq %p"
virtio_notify(void *vdev, void *vq) "vdev %p vq %p"
virtio_set_status(void *vdev, uint8_t val) "vdev %p val %u"
@@ -15,6 +15,8 @@ virtio_rng_pushed(void *rng, size_t len) "rng %p: %zd bytes pushed"
virtio_rng_request(void *rng, size_t size, unsigned quota) "rng %p: %zd bytes requested, %u bytes quota left"
# hw/virtio/virtio-balloon.c
#
virtio_balloon_bad_addr(uint64_t gpa) "%"PRIx64
virtio_balloon_handle_output(const char *name, uint64_t gpa) "section name: %s gpa: %"PRIx64
virtio_balloon_get_config(uint32_t num_pages, uint32_t actual) "num_pages: %d actual: %d"
virtio_balloon_set_config(uint32_t actual, uint32_t oldactual) "actual: %d oldactual: %d"
+7 -7
View File
@@ -1214,17 +1214,17 @@ void vhost_dev_cleanup(struct vhost_dev *hdev)
int vhost_dev_enable_notifiers(struct vhost_dev *hdev, VirtIODevice *vdev)
{
BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev)));
VirtioBusState *vbus = VIRTIO_BUS(qbus);
VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(vbus);
int i, r, e;
if (!k->ioeventfd_assign) {
/* We will pass the notifiers to the kernel, make sure that QEMU
* doesn't interfere.
*/
r = virtio_device_grab_ioeventfd(vdev);
if (r < 0) {
error_report("binding does not support host notifiers");
r = -ENOSYS;
goto fail;
}
virtio_device_stop_ioeventfd(vdev);
for (i = 0; i < hdev->nvqs; ++i) {
r = virtio_bus_set_host_notifier(VIRTIO_BUS(qbus), hdev->vq_index + i,
true);
@@ -1244,7 +1244,7 @@ fail_vq:
}
assert (e >= 0);
}
virtio_device_start_ioeventfd(vdev);
virtio_device_release_ioeventfd(vdev);
fail:
return r;
}
@@ -1267,7 +1267,7 @@ void vhost_dev_disable_notifiers(struct vhost_dev *hdev, VirtIODevice *vdev)
}
assert (r >= 0);
}
virtio_device_start_ioeventfd(vdev);
virtio_device_release_ioeventfd(vdev);
}
/* Test and clear event pending status.
+6 -1
View File
@@ -228,8 +228,13 @@ static void virtio_balloon_handle_output(VirtIODevice *vdev, VirtQueue *vq)
/* FIXME: remove get_system_memory(), but how? */
section = memory_region_find(get_system_memory(), pa, 1);
if (!int128_nz(section.size) || !memory_region_is_ram(section.mr))
if (!int128_nz(section.size) ||
!memory_region_is_ram(section.mr) ||
memory_region_is_rom(section.mr) ||
memory_region_is_romd(section.mr)) {
trace_virtio_balloon_bad_addr(pa);
continue;
}
trace_virtio_balloon_handle_output(memory_region_name(section.mr),
pa);
+47 -11
View File
@@ -147,6 +147,39 @@ void virtio_bus_set_vdev_config(VirtioBusState *bus, uint8_t *config)
}
}
/* On success, ioeventfd ownership belongs to the caller. */
int virtio_bus_grab_ioeventfd(VirtioBusState *bus)
{
VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(bus);
/* vhost can be used even if ioeventfd=off in the proxy device,
* so do not check k->ioeventfd_enabled.
*/
if (!k->ioeventfd_assign) {
return -ENOSYS;
}
if (bus->ioeventfd_grabbed == 0 && bus->ioeventfd_started) {
virtio_bus_stop_ioeventfd(bus);
/* Remember that we need to restart ioeventfd
* when ioeventfd_grabbed becomes zero.
*/
bus->ioeventfd_started = true;
}
bus->ioeventfd_grabbed++;
return 0;
}
void virtio_bus_release_ioeventfd(VirtioBusState *bus)
{
assert(bus->ioeventfd_grabbed != 0);
if (--bus->ioeventfd_grabbed == 0 && bus->ioeventfd_started) {
/* Force virtio_bus_start_ioeventfd to act. */
bus->ioeventfd_started = false;
virtio_bus_start_ioeventfd(bus);
}
}
int virtio_bus_start_ioeventfd(VirtioBusState *bus)
{
VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(bus);
@@ -161,10 +194,14 @@ int virtio_bus_start_ioeventfd(VirtioBusState *bus)
if (bus->ioeventfd_started) {
return 0;
}
r = vdc->start_ioeventfd(vdev);
if (r < 0) {
error_report("%s: failed. Fallback to userspace (slower).", __func__);
return r;
/* Only set our notifier if we have ownership. */
if (!bus->ioeventfd_grabbed) {
r = vdc->start_ioeventfd(vdev);
if (r < 0) {
error_report("%s: failed. Fallback to userspace (slower).", __func__);
return r;
}
}
bus->ioeventfd_started = true;
return 0;
@@ -179,9 +216,12 @@ void virtio_bus_stop_ioeventfd(VirtioBusState *bus)
return;
}
vdev = virtio_bus_get_device(bus);
vdc = VIRTIO_DEVICE_GET_CLASS(vdev);
vdc->stop_ioeventfd(vdev);
/* Only remove our notifier if we have ownership. */
if (!bus->ioeventfd_grabbed) {
vdev = virtio_bus_get_device(bus);
vdc = VIRTIO_DEVICE_GET_CLASS(vdev);
vdc->stop_ioeventfd(vdev);
}
bus->ioeventfd_started = false;
}
@@ -211,7 +251,6 @@ int virtio_bus_set_host_notifier(VirtioBusState *bus, int n, bool assign)
}
if (assign) {
assert(!bus->ioeventfd_started);
r = event_notifier_init(notifier, 1);
if (r < 0) {
error_report("%s: unable to init event notifier: %s (%d)",
@@ -225,9 +264,6 @@ int virtio_bus_set_host_notifier(VirtioBusState *bus, int n, bool assign)
}
return 0;
} else {
if (!bus->ioeventfd_started) {
return 0;
}
k->ioeventfd_assign(proxy, notifier, n, false);
}
+14 -5
View File
@@ -416,7 +416,7 @@ virtio_crypto_sym_op_helper(VirtIODevice *vdev,
uint32_t hash_start_src_offset = 0, len_to_hash = 0;
uint32_t cipher_start_src_offset = 0, len_to_cipher = 0;
size_t max_len, curr_size = 0;
uint64_t max_len, curr_size = 0;
size_t s;
/* Plain cipher */
@@ -441,7 +441,7 @@ virtio_crypto_sym_op_helper(VirtIODevice *vdev,
return NULL;
}
max_len = iv_len + aad_len + src_len + dst_len + hash_result_len;
max_len = (uint64_t)iv_len + aad_len + src_len + dst_len + hash_result_len;
if (unlikely(max_len > vcrypto->conf.max_size)) {
virtio_error(vdev, "virtio-crypto too big length");
return NULL;
@@ -692,8 +692,17 @@ static void virtio_crypto_dataq_bh(void *opaque)
return;
}
virtio_crypto_handle_dataq(vdev, q->dataq);
virtio_queue_set_notification(q->dataq, 1);
for (;;) {
virtio_crypto_handle_dataq(vdev, q->dataq);
virtio_queue_set_notification(q->dataq, 1);
/* Are we done or did the guest add more buffers? */
if (virtio_queue_empty(q->dataq)) {
break;
}
virtio_queue_set_notification(q->dataq, 0);
}
}
static void
@@ -829,7 +838,7 @@ static Property virtio_crypto_properties[] = {
static void virtio_crypto_get_config(VirtIODevice *vdev, uint8_t *config)
{
VirtIOCrypto *c = VIRTIO_CRYPTO(vdev);
struct virtio_crypto_config crypto_cfg;
struct virtio_crypto_config crypto_cfg = {};
/*
* Virtio-crypto device conforms to VIRTIO 1.0 which is always LE,
+3 -3
View File
@@ -191,7 +191,7 @@ static uint64_t virtio_mmio_read(void *opaque, hwaddr offset, unsigned size)
return virtio_queue_get_addr(vdev, vdev->queue_sel)
>> proxy->guest_page_shift;
case VIRTIO_MMIO_INTERRUPTSTATUS:
return vdev->isr;
return atomic_read(&vdev->isr);
case VIRTIO_MMIO_STATUS:
return vdev->status;
case VIRTIO_MMIO_HOSTFEATURESSEL:
@@ -299,7 +299,7 @@ static void virtio_mmio_write(void *opaque, hwaddr offset, uint64_t value,
}
break;
case VIRTIO_MMIO_INTERRUPTACK:
vdev->isr &= ~value;
atomic_and(&vdev->isr, ~value);
virtio_update_irq(vdev);
break;
case VIRTIO_MMIO_STATUS:
@@ -347,7 +347,7 @@ static void virtio_mmio_update_irq(DeviceState *opaque, uint16_t vector)
if (!vdev) {
return;
}
level = (vdev->isr != 0);
level = (atomic_read(&vdev->isr) != 0);
DPRINTF("virtio_mmio setting IRQ %d\n", level);
qemu_set_irq(proxy->irq, level);
}
+11 -7
View File
@@ -73,7 +73,7 @@ static void virtio_pci_notify(DeviceState *d, uint16_t vector)
msix_notify(&proxy->pci_dev, vector);
else {
VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus);
pci_set_irq(&proxy->pci_dev, vdev->isr & 1);
pci_set_irq(&proxy->pci_dev, atomic_read(&vdev->isr) & 1);
}
}
@@ -449,8 +449,7 @@ static uint32_t virtio_ioport_read(VirtIOPCIProxy *proxy, uint32_t addr)
break;
case VIRTIO_PCI_ISR:
/* reading from the ISR also clears it. */
ret = vdev->isr;
vdev->isr = 0;
ret = atomic_xchg(&vdev->isr, 0);
pci_irq_deassert(&proxy->pci_dev);
break;
case VIRTIO_MSI_CONFIG_VECTOR:
@@ -1379,9 +1378,7 @@ static uint64_t virtio_pci_isr_read(void *opaque, hwaddr addr,
{
VirtIOPCIProxy *proxy = opaque;
VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus);
uint64_t val = vdev->isr;
vdev->isr = 0;
uint64_t val = atomic_xchg(&vdev->isr, 0);
pci_irq_deassert(&proxy->pci_dev);
return val;
@@ -1583,7 +1580,8 @@ static void virtio_pci_device_plugged(DeviceState *d, Error **errp)
* Virtio capabilities present without
* VIRTIO_F_VERSION_1 confuses guests
*/
if (!virtio_has_feature(vdev->host_features, VIRTIO_F_VERSION_1)) {
if (!proxy->ignore_backend_features &&
!virtio_has_feature(vdev->host_features, VIRTIO_F_VERSION_1)) {
virtio_pci_disable_modern(proxy);
if (!legacy) {
@@ -1838,6 +1836,10 @@ static void virtio_pci_reset(DeviceState *qdev)
for (i = 0; i < VIRTIO_QUEUE_MAX; i++) {
proxy->vqs[i].enabled = 0;
proxy->vqs[i].num = 0;
proxy->vqs[i].desc[0] = proxy->vqs[i].desc[1] = 0;
proxy->vqs[i].avail[0] = proxy->vqs[i].avail[1] = 0;
proxy->vqs[i].used[0] = proxy->vqs[i].used[1] = 0;
}
}
@@ -1855,6 +1857,8 @@ static Property virtio_pci_properties[] = {
VIRTIO_PCI_FLAG_DISABLE_PCIE_BIT, false),
DEFINE_PROP_BIT("page-per-vq", VirtIOPCIProxy, flags,
VIRTIO_PCI_FLAG_PAGE_PER_VQ_BIT, false),
DEFINE_PROP_BOOL("x-ignore-backend-features", VirtIOPCIProxy,
ignore_backend_features, false),
DEFINE_PROP_END_OF_LIST(),
};
+1
View File
@@ -153,6 +153,7 @@ struct VirtIOPCIProxy {
int config_cap;
uint32_t flags;
bool disable_modern;
bool ignore_backend_features;
OnOffAuto disable_legacy;
uint32_t class_code;
uint32_t nvectors;
+87 -30
View File
@@ -92,7 +92,7 @@ struct VirtQueue
uint16_t queue_index;
int inuse;
unsigned int inuse;
uint16_t vector;
VirtIOHandleOutput handle_output;
@@ -592,24 +592,12 @@ static void virtqueue_undo_map_desc(unsigned int out_num, unsigned int in_num,
}
static void virtqueue_map_iovec(struct iovec *sg, hwaddr *addr,
unsigned int *num_sg, unsigned int max_size,
unsigned int *num_sg,
int is_write)
{
unsigned int i;
hwaddr len;
/* Note: this function MUST validate input, some callers
* are passing in num_sg values received over the network.
*/
/* TODO: teach all callers that this can fail, and return failure instead
* of asserting here.
* When we do, we might be able to re-enable NDEBUG below.
*/
#ifdef NDEBUG
#error building with NDEBUG is not supported
#endif
assert(*num_sg <= max_size);
for (i = 0; i < *num_sg; i++) {
len = sg[i].iov_len;
sg[i].iov_base = cpu_physical_memory_map(addr[i], &len, is_write);
@@ -626,10 +614,8 @@ static void virtqueue_map_iovec(struct iovec *sg, hwaddr *addr,
void virtqueue_map(VirtQueueElement *elem)
{
virtqueue_map_iovec(elem->in_sg, elem->in_addr, &elem->in_num,
VIRTQUEUE_MAX_SIZE, 1);
virtqueue_map_iovec(elem->out_sg, elem->out_addr, &elem->out_num,
VIRTQUEUE_MAX_SIZE, 0);
virtqueue_map_iovec(elem->in_sg, elem->in_addr, &elem->in_num, 1);
virtqueue_map_iovec(elem->out_sg, elem->out_addr, &elem->out_num, 0);
}
static void *virtqueue_alloc_element(size_t sz, unsigned out_num, unsigned in_num)
@@ -790,6 +776,16 @@ void *qemu_get_virtqueue_element(QEMUFile *f, size_t sz)
qemu_get_buffer(f, (uint8_t *)&data, sizeof(VirtQueueElementOld));
/* TODO: teach all callers that this can fail, and return failure instead
* of asserting here.
* When we do, we might be able to re-enable NDEBUG below.
*/
#ifdef NDEBUG
#error building with NDEBUG is not supported
#endif
assert(ARRAY_SIZE(data.in_addr) >= data.in_num);
assert(ARRAY_SIZE(data.out_addr) >= data.out_num);
elem = virtqueue_alloc_element(sz, data.out_num, data.in_num);
elem->index = data.index;
@@ -945,7 +941,7 @@ void virtio_reset(void *opaque)
vdev->guest_features = 0;
vdev->queue_sel = 0;
vdev->status = 0;
vdev->isr = 0;
atomic_set(&vdev->isr, 0);
vdev->config_vector = VIRTIO_NO_VECTOR;
virtio_notify_vector(vdev, vdev->config_vector);
@@ -1260,7 +1256,18 @@ static void virtio_queue_notify_vq(VirtQueue *vq)
void virtio_queue_notify(VirtIODevice *vdev, int n)
{
virtio_queue_notify_vq(&vdev->vq[n]);
VirtQueue *vq = &vdev->vq[n];
if (unlikely(!vq->vring.desc || vdev->broken)) {
return;
}
trace_virtio_queue_notify(vdev, vq - vdev->vq, vq);
if (vq->handle_aio_output) {
event_notifier_set(&vq->host_notifier);
} else if (vq->handle_output) {
vq->handle_output(vdev, vq);
}
}
uint16_t virtio_queue_vector(VirtIODevice *vdev, int n)
@@ -1318,11 +1325,16 @@ void virtio_del_queue(VirtIODevice *vdev, int n)
vdev->vq[n].vring.num_default = 0;
}
void virtio_irq(VirtQueue *vq)
static void virtio_set_isr(VirtIODevice *vdev, int value)
{
trace_virtio_irq(vq);
vq->vdev->isr |= 0x01;
virtio_notify_vector(vq->vdev, vq->vector);
uint8_t old = atomic_read(&vdev->isr);
/* Do not write ISR if it does not change, so that its cacheline remains
* shared in the common case where the guest does not read it.
*/
if ((old & value) != value) {
atomic_or(&vdev->isr, value);
}
}
bool virtio_should_notify(VirtIODevice *vdev, VirtQueue *vq)
@@ -1348,6 +1360,33 @@ bool virtio_should_notify(VirtIODevice *vdev, VirtQueue *vq)
return !v || vring_need_event(vring_get_used_event(vq), new, old);
}
void virtio_notify_irqfd(VirtIODevice *vdev, VirtQueue *vq)
{
if (!virtio_should_notify(vdev, vq)) {
return;
}
trace_virtio_notify_irqfd(vdev, vq);
/*
* virtio spec 1.0 says ISR bit 0 should be ignored with MSI, but
* windows drivers included in virtio-win 1.8.0 (circa 2015) are
* incorrectly polling this bit during crashdump and hibernation
* in MSI mode, causing a hang if this bit is never updated.
* Recent releases of Windows do not really shut down, but rather
* log out and hibernate to make the next startup faster. Hence,
* this manifested as a more serious hang during shutdown with
*
* Next driver release from 2016 fixed this problem, so working around it
* is not a must, but it's easy to do so let's do it here.
*
* Note: it's safe to update ISR from any thread as it was switched
* to an atomic operation.
*/
virtio_set_isr(vq->vdev, 0x1);
event_notifier_set(&vq->guest_notifier);
}
void virtio_notify(VirtIODevice *vdev, VirtQueue *vq)
{
if (!virtio_should_notify(vdev, vq)) {
@@ -1355,7 +1394,7 @@ void virtio_notify(VirtIODevice *vdev, VirtQueue *vq)
}
trace_virtio_notify(vdev, vq);
vdev->isr |= 0x01;
virtio_set_isr(vq->vdev, 0x1);
virtio_notify_vector(vdev, vq->vector);
}
@@ -1364,7 +1403,7 @@ void virtio_notify_config(VirtIODevice *vdev)
if (!(vdev->status & VIRTIO_CONFIG_S_DRIVER_OK))
return;
vdev->isr |= 0x03;
virtio_set_isr(vdev, 0x3);
vdev->generation++;
virtio_notify_vector(vdev, vdev->config_vector);
}
@@ -1823,9 +1862,11 @@ int virtio_load(VirtIODevice *vdev, QEMUFile *f, int version_id)
/*
* Some devices migrate VirtQueueElements that have been popped
* from the avail ring but not yet returned to the used ring.
* Since max ring size < UINT16_MAX it's safe to use modulo
* UINT16_MAX + 1 subtraction.
*/
vdev->vq[i].inuse = vdev->vq[i].last_avail_idx -
vdev->vq[i].used_idx;
vdev->vq[i].inuse = (uint16_t)(vdev->vq[i].last_avail_idx -
vdev->vq[i].used_idx);
if (vdev->vq[i].inuse > vdev->vq[i].vring.num) {
error_report("VQ %d size 0x%x < last_avail_idx 0x%x - "
"used_idx 0x%x",
@@ -1895,7 +1936,7 @@ void virtio_init(VirtIODevice *vdev, const char *name,
vdev->device_id = device_id;
vdev->status = 0;
vdev->isr = 0;
atomic_set(&vdev->isr, 0);
vdev->queue_sel = 0;
vdev->config_vector = VIRTIO_NO_VECTOR;
vdev->vq = g_malloc0(sizeof(VirtQueue) * VIRTIO_QUEUE_MAX);
@@ -1982,7 +2023,7 @@ static void virtio_queue_guest_notifier_read(EventNotifier *n)
{
VirtQueue *vq = container_of(n, VirtQueue, guest_notifier);
if (event_notifier_test_and_clear(n)) {
virtio_irq(vq);
virtio_notify_vector(vq->vdev, vq->vector);
}
}
@@ -2191,6 +2232,22 @@ void virtio_device_stop_ioeventfd(VirtIODevice *vdev)
virtio_bus_stop_ioeventfd(vbus);
}
int virtio_device_grab_ioeventfd(VirtIODevice *vdev)
{
BusState *qbus = qdev_get_parent_bus(DEVICE(vdev));
VirtioBusState *vbus = VIRTIO_BUS(qbus);
return virtio_bus_grab_ioeventfd(vbus);
}
void virtio_device_release_ioeventfd(VirtIODevice *vdev)
{
BusState *qbus = qdev_get_parent_bus(DEVICE(vdev));
VirtioBusState *vbus = VIRTIO_BUS(qbus);
virtio_bus_release_ioeventfd(vbus);
}
static void virtio_device_class_init(ObjectClass *klass, void *data)
{
/* Set the default value here. */
+63 -3
View File
@@ -27,16 +27,18 @@
#include "hw/hw.h"
#include "hw/sysbus.h"
#include "hw/boards.h"
#include "sysemu/char.h"
#include "qemu/log.h"
#include "qapi/error.h"
#include "hw/xen/xen_backend.h"
#include "hw/xen/xen_pvdev.h"
#include "monitor/qdev.h"
#include <xen/grant_table.h>
#define TYPE_XENSYSDEV "xensysdev"
DeviceState *xen_sysdev;
BusState *xen_sysbus;
/* ------------------------------------------------------------- */
@@ -121,6 +123,12 @@ static struct XenDevice *xen_be_get_xendev(const char *type, int dom, int dev,
/* init new xendev */
xendev = g_malloc0(ops->size);
object_initialize(&xendev->qdev, ops->size, TYPE_XENBACKEND);
qdev_set_parent_bus(&xendev->qdev, xen_sysbus);
qdev_set_id(&xendev->qdev, g_strdup_printf("xen-%s-%d", type, dev));
qdev_init_nofail(&xendev->qdev);
object_unref(OBJECT(&xendev->qdev));
xendev->type = type;
xendev->dom = dom;
xendev->dev = dev;
@@ -528,6 +536,8 @@ int xen_be_init(void)
xen_sysdev = qdev_create(NULL, TYPE_XENSYSDEV);
qdev_init_nofail(xen_sysdev);
xen_sysbus = qbus_create(TYPE_XENSYSBUS, DEVICE(xen_sysdev), "xen-sysbus");
qbus_set_bus_hotplug_handler(xen_sysbus, &error_abort);
return 0;
@@ -539,6 +549,15 @@ err:
return -1;
}
static void xen_set_dynamic_sysbus(void)
{
Object *machine = qdev_get_machine();
ObjectClass *oc = object_get_class(machine);
MachineClass *mc = MACHINE_CLASS(oc);
mc->has_dynamic_sysbus = true;
}
int xen_be_register(const char *type, struct XenDevOps *ops)
{
char path[50];
@@ -560,6 +579,8 @@ int xen_be_register(const char *type, struct XenDevOps *ops)
void xen_be_register_common(void)
{
xen_set_dynamic_sysbus();
xen_be_register("console", &xen_console_ops);
xen_be_register("vkbd", &xen_kbdmouse_ops);
xen_be_register("qdisk", &xen_blkdev_ops);
@@ -586,6 +607,42 @@ int xen_be_bind_evtchn(struct XenDevice *xendev)
}
static Property xendev_properties[] = {
DEFINE_PROP_END_OF_LIST(),
};
static void xendev_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->props = xendev_properties;
set_bit(DEVICE_CATEGORY_MISC, dc->categories);
}
static const TypeInfo xendev_type_info = {
.name = TYPE_XENBACKEND,
.parent = TYPE_XENSYSDEV,
.class_init = xendev_class_init,
.instance_size = sizeof(struct XenDevice),
};
static void xen_sysbus_class_init(ObjectClass *klass, void *data)
{
HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(klass);
hc->unplug = qdev_simple_device_unplug_cb;
}
static const TypeInfo xensysbus_info = {
.name = TYPE_XENSYSBUS,
.parent = TYPE_BUS,
.class_init = xen_sysbus_class_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_HOTPLUG_HANDLER },
{ }
}
};
static int xen_sysdev_init(SysBusDevice *dev)
{
return 0;
@@ -602,6 +659,7 @@ static void xen_sysdev_class_init(ObjectClass *klass, void *data)
k->init = xen_sysdev_init;
dc->props = xen_sysdev_properties;
dc->bus_type = TYPE_XENSYSBUS;
}
static const TypeInfo xensysdev_info = {
@@ -613,7 +671,9 @@ static const TypeInfo xensysdev_info = {
static void xenbe_register_types(void)
{
type_register_static(&xensysbus_info);
type_register_static(&xensysdev_info);
type_register_static(&xendev_type_info);
}
type_init(xenbe_register_types);
type_init(xenbe_register_types)
+3 -1
View File
@@ -19,6 +19,7 @@
#include "qemu/osdep.h"
#include "qemu/log.h"
#include "hw/qdev-core.h"
#include "hw/xen/xen_backend.h"
#include "hw/xen/xen_pvdev.h"
@@ -307,7 +308,8 @@ void xen_pv_del_xendev(struct XenDevice *xendev)
}
QTAILQ_REMOVE(&xendevs, xendev, next);
g_free(xendev);
qdev_unplug(&xendev->qdev, NULL);
}
void xen_pv_insert_xendev(struct XenDevice *xendev)
+1 -1
View File
@@ -401,7 +401,7 @@ static inline void *tlb_vaddr_to_host(CPUArchState *env, target_ulong addr,
int access_type, int mmu_idx)
{
#if defined(CONFIG_USER_ONLY)
return g2h(vaddr);
return g2h(addr);
#else
int index = (addr >> TARGET_PAGE_BITS) & (CPU_TLB_SIZE - 1);
CPUTLBEntry *tlbentry = &env->tlb_table[mmu_idx][index];
+1
View File
@@ -320,6 +320,7 @@ static inline void tb_set_jmp_target(TranslationBlock *tb,
static inline void tb_add_jump(TranslationBlock *tb, int n,
TranslationBlock *tb_next)
{
assert(n < ARRAY_SIZE(tb->jmp_list_next));
if (tb->jmp_list_next[n]) {
/* Another thread has already done this while we were
* outside of the lock; nothing to do in this case */
+4
View File
@@ -18,6 +18,10 @@
.driver = "intel-iommu",\
.property = "x-buggy-eim",\
.value = "true",\
},{\
.driver = "virtio-pci",\
.property = "x-ignore-backend-features",\
.value = "on",\
},
#define HW_COMPAT_2_6 \
+7 -2
View File
@@ -36,7 +36,7 @@
/**
* PCMachineState:
* @acpi_dev: link to ACPI PM device that performs ACPI hotplug handling
* @boot_cpus_le: number of present VCPUs, referenced by 'etc/boot-cpus' fw_cfg
* @boot_cpus: number of present VCPUs
*/
struct PCMachineState {
/*< private >*/
@@ -71,7 +71,7 @@ struct PCMachineState {
bool apic_xrupt_override;
unsigned apic_id_limit;
CPUArchIdList *possible_cpus;
uint16_t boot_cpus_le;
uint16_t boot_cpus;
/* NUMA information: */
uint64_t numa_nodes;
@@ -395,6 +395,11 @@ bool e820_get_entry(int, uint32_t, uint64_t *, uint64_t *);
.driver = "Opteron_G3" "-" TYPE_X86_CPU,\
.property = "stepping",\
.value = "1",\
},\
{\
.driver = "isa-pcspk",\
.property = "migrate",\
.value = "off",\
},
#define PC_COMPAT_2_6 \
+3 -3
View File
@@ -180,7 +180,7 @@ MemoryRegion *rom_add_blob(const char *name, const void *blob, size_t len,
size_t max_len, hwaddr addr,
const char *fw_file_name,
FWCfgReadCallback fw_callback,
void *callback_opaque);
void *callback_opaque, AddressSpace *as);
int rom_add_elf_program(const char *name, void *data, size_t datasize,
size_t romsize, hwaddr addr, AddressSpace *as);
int rom_check_and_register_reset(void);
@@ -194,7 +194,7 @@ void hmp_info_roms(Monitor *mon, const QDict *qdict);
#define rom_add_file_fixed(_f, _a, _i) \
rom_add_file(_f, NULL, _a, _i, false, NULL, NULL)
#define rom_add_blob_fixed(_f, _b, _l, _a) \
rom_add_blob(_f, _b, _l, _l, _a, NULL, NULL, NULL)
rom_add_blob(_f, _b, _l, _l, _a, NULL, NULL, NULL, NULL)
#define rom_add_file_mr(_f, _mr, _i) \
rom_add_file(_f, NULL, 0, _i, false, _mr, NULL)
#define rom_add_file_as(_f, _as, _i) \
@@ -202,7 +202,7 @@ void hmp_info_roms(Monitor *mon, const QDict *qdict);
#define rom_add_file_fixed_as(_f, _a, _i, _as) \
rom_add_file(_f, NULL, _a, _i, false, NULL, _as)
#define rom_add_blob_fixed_as(_f, _b, _l, _a, _as) \
rom_add_blob(_f, _b, _l, _l, _a, NULL, NULL, _as)
rom_add_blob(_f, _b, _l, _l, _a, NULL, NULL, NULL, _as)
#define PC_ROM_MIN_VGA 0xc0000
#define PC_ROM_MIN_OPTION 0xc8000
+6
View File
@@ -79,6 +79,12 @@ struct sPAPRPHBState {
uint64_t dma64_win_addr;
uint32_t numa_node;
/* Fields for migration compatibility hacks */
bool pre_2_8_migration;
uint32_t mig_liobn;
hwaddr mig_mem_win_addr, mig_mem_win_size;
hwaddr mig_io_win_addr, mig_io_win_size;
};
#define SPAPR_PCI_MEM_WIN_BUS_OFFSET 0x80000000ULL
+4
View File
@@ -37,6 +37,7 @@
#define _SPAPR_OVEC_H
#include "cpu.h"
#include "migration/vmstate.h"
typedef struct sPAPROptionVector sPAPROptionVector;
@@ -64,4 +65,7 @@ sPAPROptionVector *spapr_ovec_parse_vector(target_ulong table_addr, int vector);
int spapr_ovec_populate_dt(void *fdt, int fdt_offset,
sPAPROptionVector *ov, const char *name);
/* migration */
extern const VMStateDescription vmstate_spapr_ovec;
#endif /* !defined (_SPAPR_OVEC_H) */
+14
View File
@@ -97,6 +97,16 @@ struct VirtioBusState {
* Set if ioeventfd has been started.
*/
bool ioeventfd_started;
/*
* Set if ioeventfd has been grabbed by vhost. When ioeventfd
* is grabbed by vhost, we track its started/stopped state (which
* depends in turn on the virtio status register), but do not
* register a handler for the ioeventfd. When ioeventfd is
* released, if ioeventfd_started is true we finally register
* the handler so that QEMU's device model can use ioeventfd.
*/
int ioeventfd_grabbed;
};
void virtio_bus_device_plugged(VirtIODevice *vdev, Error **errp);
@@ -131,6 +141,10 @@ bool virtio_bus_ioeventfd_enabled(VirtioBusState *bus);
int virtio_bus_start_ioeventfd(VirtioBusState *bus);
/* Stop the ioeventfd. */
void virtio_bus_stop_ioeventfd(VirtioBusState *bus);
/* Tell the bus that vhost is grabbing the ioeventfd. */
int virtio_bus_grab_ioeventfd(VirtioBusState *bus);
/* bus that vhost is not using the ioeventfd anymore. */
void virtio_bus_release_ioeventfd(VirtioBusState *bus);
/* Switch from/to the generic ioeventfd handler */
int virtio_bus_set_host_notifier(VirtioBusState *bus, int n, bool assign);
Loaded 100 of 195 files, more files were not shown because too many files have changed in this diff. Show more