Fix a memory leak in ide_register_restart_cb() in hw/ide/core.c and add
idebus_unrealize() in hw/ide/qdev.c to have calls to
qemu_del_vm_change_state_handler() to deal with the dangling change
state handler during hot-unplugging ide devices which might lead to a
crash.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1474995212-10580-1-git-send-email-ashijeetacharya@gmail.com
[Minor whitespace fix --js]
Signed-off-by: John Snow <jsnow@redhat.com>
(cherry picked from commit ca44141d5f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The isa_register_portio_list() function allocates ioports
data/state. Let's keep the reference to this data on some owner. This
isn't enough to fix leaks, but at least, ASAN stops complaining of
direct leaks. Further cleanup would require calling
portio_list_del/destroy().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit e305a16510)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
blk_eject is only used by scsi-disk and atapi, and in both cases we
only attempt to invoke blk_eject if we have a bona-fide change in
tray state.
The "issue" here is that the tray state does not generate a QMP event
unless there is a medium/BDS attached to the device, so if libvirt et al
are waiting for a tray event to occur from an empty-but-closed drive,
software opening that drive will not emit an event and libvirt will
wait forever.
Change this by modifying blk_eject to always emit an event, instead of
conditionally on a "real" backend eject.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1373264
Reported-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1478553214-497-2-git-send-email-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
(cherry picked from commit c47ee043dc)
* dropped functional depedenecy on 2d76e724
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The "Copy" menu item copies VTE terminal text to the clipboard. This
only works with VTE terminals, not with graphics consoles.
Disable the menu item when the current notebook page isn't a VTE
terminal.
This patch fixes a segfault. Reproducer: Start QEMU and click the Copy
menu item when the guest display is visible.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20161214142518.10504-1-stefanha@redhat.com
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit a08156321a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Introductory comment for rtl8168 VFIO MSI-X quirk states:
At BAR2 offset 0x70 there is a dword data register,
offset 0x74 is a dword address register.
vfio: vfio_bar_read(0000:05:00.0:BAR2+0x70, 4) = 0xfee00398 // read data
Thus, correct offset for data read is 0x70,
but function vfio_rtl8168_quirk_data_read() wrongfully uses offset 0x74.
Signed-off-by: Thorsten Kohfeldt <thorsten.kohfeldt@gmx.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
(cherry picked from commit 31e6a7b17b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Segfault happens when leaving qemu with msmouse backend:
#0 0x00007fa8526ac975 in raise () at /lib64/libc.so.6
#1 0x00007fa8526add8a in abort () at /lib64/libc.so.6
#2 0x0000558be78846ab in error_exit (err=16, msg=0x558be799da10 ...
#3 0x0000558be7884717 in qemu_mutex_destroy (mutex=0x558be93be750) at ...
#4 0x0000558be7549951 in qemu_chr_free_common (chr=0x558be93be750) at ...
#5 0x0000558be754999c in qemu_chr_free (chr=0x558be93be750) at ...
#6 0x0000558be7549a20 in qemu_chr_delete (chr=0x558be93be750) at ...
#7 0x0000558be754a8ef in qemu_chr_cleanup () at qemu-char.c:4643
#8 0x0000558be755843e in main (argc=5, argv=0x7ffe925d7118, ...
The chr was freed by msmouse close callback before chardev cleanup,
Then qemu_mutex_destroy triggered raise().
Because freeing chr is handled by qemu_chr_free_common, Remove the free from
msmouse_chr_close to avoid double free.
Fixes: c1111a24a3
Cc: qemu-stable@nongnu.org
Signed-off-by: Lin Ma <lma@suse.com>
Message-Id: <20160915143158.4796-1-lma@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 9e14037f05)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Initialization of memory backends may take a while when
prealloc=yes is used, depending on their size. Initializing
memory backends before chardevs may delay the creation of monitor
sockets, and trigger timeouts on management software that waits
until the monitor socket is created by QEMU. See, for example,
the bug report at:
https://bugzilla.redhat.com/show_bug.cgi?id=1371211
In addition to that, allocating memory before calling
configure_accelerator() breaks the tcg_enabled() checks at
memory_region_init_*().
This patch fixes those problems by adding "memory-backend-*"
classes to the delayed-initialization list.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
(cherry picked from commit 6546d0dba6)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
vhost-user-test relies on iPXE just to initialize the virtio-net
device, and doesn't do any actual packet tx/rx testing.
In addition to that, the test relies on TCG, which is
imcompatible with vhost. The test only worked by accident: a bug
the memory backend initialization made memory regions not have
the DIRTY_MEMORY_CODE bit set in dirty_log_mask.
This changes vhost-user-test to initialize the virtio-net device
using libqos, and not use TCG nor pxe-virtio.rom.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
(cherry picked from commit cdafe92961)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Building qemu fails in distributions where gcc enables PIE by default
(e.g. Debian unstable) with:
/usr/bin/ld: -r and -pie may not be used together
Use -r instead of -Wl,-r to avoid gcc passing -pie to the linker
when PIE is enabled and a relocatable object is passed.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Message-Id: <20161127162817.15144-1-bunk@stusta.de>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit c96f0ee6a6)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Since commit e1d4fb2d ("kvm-irqchip: x86: add msi route notify fn"),
kvm_irqchip_add_msi_route() starts to use pci_get_msi_message() to fetch
MSI info. This requires that we setup MSI related fields in PCIDevice.
For most devices, that won't be a problem, as long as we are using
general interfaces like msi_init()/msix_init().
However, for pci-assign devices, MSI/MSI-X is treated differently - PCI
assign devices are maintaining its own MSI table and cap information in
AssignedDevice struct. however that's not synced up with PCIDevice's
fields. That will leads to pci_get_msi_message() failed to find correct
MSI capability, even with an NULL msix_table.
A quick fix is to sync up the two places: both the capability bits and
table address for MSI/MSI-X.
Reported-by: Changlimin <changlimin@h3c.com>
Tested-by: Changlimin <changlimin@h3c.com>
Cc: qemu-stable@nongnu.org
Fixes: e1d4fb2d ("kvm-irqchip: x86: add msi route notify fn")
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1480042522-16551-1-git-send-email-peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 64e184e260)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Device ivshmem property use64=0 is designed to make the device
expose a 32 bit shared memory BAR instead of 64 bit one. The
default is a 64 bit BAR, except pc-1.2 and older retain a 32 bit
BAR. A 32 bit BAR can support only up to 1 GiB of shared memory.
This worked as designed until commit 5400c02 accidentally flipped
its sense: since then, we misinterpret use64=0 as use64=1 and vice
versa. Worse, the default got flipped as well. Devices
ivshmem-plain and ivshmem-doorbell are not affected.
Fix by restoring the test of IVShmemState member not_legacy_32bit
that got messed up in commit 5400c02. Also update its
initialization for devices ivhsmem-plain and ivshmem-doorbell.
Without that, they'd regress to 32 bit BARs.
Cc: qemu-stable@nongnu.org
Signed-off-by: Zhuang Yanying <ann.zhuangyanying@huawei.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
(cherry picked from commit be4e0d7375)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The legacy vring layout is not used anymore as we use the separate
mappings even for legacy devices.
This patch simply removes it.
This also fixes a bug with virtio 1 devices when the vring descriptor table
is mapped at a higher address than the used vring because the following
function may return an insanely great value:
hwaddr virtio_queue_get_ring_size(VirtIODevice *vdev, int n)
{
return vdev->vq[n].vring.used - vdev->vq[n].vring.desc +
virtio_queue_get_used_size(vdev, n);
}
and the mapping fails.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 1cdce7c54d)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
libcurl will only give us as much data as there is, not more. The block
layer will deny requests beyond the end of file for us; but since this
block driver is still using a sector-based interface, we can still get
in trouble if the file size is not a multiple of 512.
While we have already made sure not to attempt transfers beyond the end
of the file, we are currently still trying to receive data from there if
the original request exceeds the file size. This patch fixes this issue
and invokes qemu_iovec_memset() on the iovec's tail.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20161025025431.24714-5-mreitz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
(cherry picked from commit 4e504535c1)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
For some connection types (like FTP, generally), more than one socket
may be used (in FTP's case: control vs. data stream). As of commit
838ef60249 ("curl: Eliminate unnecessary
use of curl_multi_socket_all"), we have to remember all of the sockets
used by libcurl, but in fact we only did that for a single one. Since
one libcurl connection may use multiple sockets, however, we have to
remember them all.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20161025025431.24714-4-mreitz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
(cherry picked from commit ff5ca1664a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
While commit 38bbc0a580 is correct in that
the callback is supposed to return the number of bytes handled; what it
does not mention is that libcurl will throw an error if the callback did
not "handle" all of the data passed to it.
Therefore, if the callback receives some data that it cannot handle
(either because the receive buffer has not been set up yet or because it
would not fit into the receive buffer) and we have to ignore it, we
still have to report that the data has been handled.
Obviously, this should not happen normally. But it does happen at least
for FTP connections where some data (that we do not expect) may be
generated when the connection is established.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20161025025431.24714-3-mreitz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
(cherry picked from commit 4e7676571b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Discard is advisory, so rounding the requests to alignment
boundaries is never semantically wrong from the data that
the guest sees. But at least the Dell Equallogic iSCSI SANs
has an interesting property that its advertised discard
alignment is 15M, yet documents that discarding a sequence
of 1M slices will eventually result in the 15M page being
marked as discarded, and it is possible to observe which
pages have been discarded.
Between commits 9f1963b and b8d0a980, we converted the block
layer to a byte-based interface that ultimately ignores any
unaligned head or tail based on the driver's advertised
discard granularity, which means that qemu 2.7 refuses to
pass any discard request smaller than 15M down to the Dell
Equallogic hardware. This is a slight regression in behavior
compared to earlier qemu, where a guest executing discards
in power-of-2 chunks used to be able to get every page
discarded, but is now left with various pages still allocated
because the guest requests did not align with the hardware's
15M pages.
Since the SCSI specification says nothing about a minimum
discard granularity, and only documents the preferred
alignment, it is best if the block layer gives the driver
every bit of information about discard requests, rather than
rounding it to alignment boundaries early.
Rework the block layer discard algorithm to mirror the write
zero algorithm: always peel off any unaligned head or tail
and manage that in isolation, then do the bulk of the request
on an aligned boundary. The fallback when the driver returns
-ENOTSUP for an unaligned request is to silently ignore that
portion of the discard request; but for devices that can pass
the partial request all the way down to hardware, this can
result in the hardware coalescing requests and discarding
aligned pages after all.
Reported by: Peter Lieven <pl@kamp.de>
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 3482b9bc41)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Right now, the block layer rounds discard requests, so that
individual drivers are able to assert that discard requests
will never be unaligned. But there are some ISCSI devices
that track and coalesce multiple unaligned requests, turning it
into an actual discard if the requests eventually cover an
entire page, which implies that it is better to always pass
discard requests as low down the stack as possible.
In isolation, this patch has no semantic effect, since the
block layer currently never passes an unaligned request through.
But the block layer already has code that silently ignores
drivers that return -ENOTSUP for a discard request that cannot
be honored (as well as drivers that return 0 even when nothing
was done). But the next patch will update the block layer to
fragment discard requests, so that clients are guaranteed that
they are either dealing with an unaligned head or tail, or an
aligned core, making it similar to the block layer semantics of
write zero fragmentation.
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 49228d1e95)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Commit 443668ca rewrote the write_zeroes logic to guarantee that
an unaligned request never crosses a cluster boundary. But
in the rewrite, the new code assumed that at most one iteration
would be needed to get to an alignment boundary.
However, it is easy to trigger an assertion failure: the Linux
kernel limits loopback devices to advertise a max_transfer of
only 64k. Any operation that requires falling back to writes
rather than more efficient zeroing must obey max_transfer during
that fallback, which means an unaligned head may require multiple
iterations of the write fallbacks before reaching the aligned
boundaries, when layering a format with clusters larger than 64k
atop the protocol of file access to a loopback device.
Test case:
$ qemu-img create -f qcow2 -o cluster_size=1M file 10M
$ losetup /dev/loop2 /path/to/file
$ qemu-io -f qcow2 /dev/loop2
qemu-io> w 7m 1k
qemu-io> w -z 8003584 2093056
In fairness to Denis (as the original listed author of the culprit
commit), the faulty logic for at most one iteration is probably all
my fault in reworking his idea. But the solution is to restore what
was in place prior to that commit: when dealing with an unaligned
head or tail, iterate as many times as necessary while fragmenting
the operation at max_transfer boundaries.
Reported-by: Ed Swierk <eswierk@skyportsystems.com>
CC: qemu-stable@nongnu.org
CC: Denis V. Lunev <den@openvz.org>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit b2f95feec5)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
At the qcow2 layer, discard is only possible on a per-cluster
basis; at the moment, qcow2 silently rounds any unaligned
requests to this granularity. However, an upcoming patch will
fix a regression in the block layer ignoring too much of an
unaligned discard request, by changing the block layer to
break up a discard request at alignment boundaries; for that
to work, the block layer must know about our limits.
However, we can't go one step further by changing
qcow2_discard_clusters() to assert that requests are always
aligned, since that helper function is reached on paths
outside of the block layer.
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit ecdbead659)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
if_start() goes through the slirp->if_fastq and slirp->if_batchq
list of pending messages, and accesses ifm->ifq_so->so_nqueued of its
elements if ifm->ifq_so != NULL. When freeing a socket, we thus need
to make sure that any pending message for this socket does not refer
to the socket any more.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Brian Candler <b.candler@pobox.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit ea64d5f088)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
With virtio 1, the vring layout is split in 3 separate regions of
contiguous memory for the descriptor table, the available ring and the
used ring, as opposed with legacy virtio which uses a single region.
In case of memory re-mapping, the code ensures it doesn't affect the
vring mapping. This is done in vhost_verify_ring_mappings() which assumes
the device is legacy.
This patch changes vhost_verify_ring_mappings() to check the mappings of
each part of the vring separately.
This works for legacy mappings as well.
Cc: qemu-stable@nongnu.org
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit f1f9e6c596)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Commit 3ff2f67a changed bdrv_co_flush() so that no flush is issues if
the image hasn't been dirtied since the last flush. This is not quite
correct: The condition should be that the image hasn't been dirtied
since the last _successful_ flush. This patch changes the logic
accordingly.
Without this fix, subsequent bdrv_co_flush() calls would return success
without actually doing anything even though the image is still dirty.
The difference is visible in some blkdebug test cases where error
messages incorrectly disappeared after commit 3ff2f67a.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1478300595-10090-1-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit e6af1e0854)
Conflicts:
block/io.c
* remove context dep on 9972354
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
virtio 1.0 spec says this is a legacy feature bit,
hide it from guests in modern mode.
Note: for cross-version migration compatibility,
we keep the bit set in host_features.
The result will be that a guest migrating cross-version
will see host features change under it.
As guests only seem to read it once, this should
not be an issue. Meanwhile, will work to fix guests to
ignore this bit in virtio1 mode, too.
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
(cherry picked from commit 2a083ffd2e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Legacy features are those that transitional devices only
expose on the legacy interface.
Allow different ones per device class.
Cc: qemu-stable@nongnu.org # dependency for the next patch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
(cherry picked from commit 9b706dbbbb)
Conflicts:
hw/virtio/virtio.c
* drop context dep on ff4c07df
* resolv func dep on ff4c07df creating vdc variable in
virtio_device_class_init()
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When migration for target-ppc was converted to vmstate, several
VMSTATE_EQUAL() checks were foolishly included of things that really
should be internal state. Specifically we verified equality of the
insns_flags and insns_flags2 fields, which are used within TCG to
determine which groups of instructions are available on this cpu
model. Between qemu-2.6 and qemu-2.7 we made some changes to these
classes which broke migration.
This path fixes migration both forwards and backwards. On migration
from 2.6 to later versions we import the fields into teporary
variables, which we then ignore. In migration backwards, we populate
the temporary fields from the runtime fields, but mask out the bits
which were added after qemu-2.6, allowing the VMSTATE_EQUAL in
qemu-2.6 to accept the stream.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
(cherry picked from commit 16a2497bd4)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The use of -net socket,listen was broken in the following
commit
commit 16a3df403b
Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Date: Fri May 13 15:35:19 2016 +0800
net/net: Add SocketReadState for reuse codes
This function is from net/socket.c, move it to net.c and net.h.
Add SocketReadState to make others reuse net_fill_rstate().
suggestion from jason.
This refactored the state out of NetSocketState into a
separate SocketReadState. This refactoring requires
that a callback is provided to be triggered upon
completion of a packet receive from the guest.
The patch only registered this callback in the codepaths
hit by -net socket,connect, not -net socket,listen. So
as a result packets sent by the guest in the latter case
get dropped on the floor.
This bug is hidden because net_fill_rstate() silently
does nothing if the callback is not set.
This patch adds in the middle callback registration
and also adds an assert so that QEMU aborts if there
are any other codepaths hit which are missing the
callback.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit e79cd40680)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
With a vfio assigned device we lay down a base MemoryRegion registered
as an IO region, giving us read & write accessors. If the region
supports mmap, we lay down a higher priority sub-region MemoryRegion
on top of the base layer initialized as a RAM device pointer to the
mmap. Finally, if we have any quirks for the device (ie. address
ranges that need additional virtualization support), we put another IO
sub-region on top of the mmap MemoryRegion. When this is flattened,
we now potentially have sub-page mmap MemoryRegions exposed which
cannot be directly mapped through KVM.
This is as expected, but a subtle detail of this is that we end up
with two different access mechanisms through QEMU. If we disable the
mmap MemoryRegion, we make use of the IO MemoryRegion and service
accesses using pread and pwrite to the vfio device file descriptor.
If the mmap MemoryRegion is enabled and results in one of these
sub-page gaps, QEMU handles the access as RAM, using memcpy to the
mmap. Using either pread/pwrite or the mmap directly should be
correct, but using memcpy causes us problems. I expect that not only
does memcpy not necessarily honor the original width and alignment in
performing a copy, but it potentially also uses processor instructions
not intended for MMIO spaces. It turns out that this has been a
problem for Realtek NIC assignment, which has such a quirk that
creates a sub-page mmap MemoryRegion access.
To resolve this, we disable memory_access_is_direct() for ram_device
regions since QEMU assumes that it can use memcpy for those regions.
Instead we access through MemoryRegionOps, which replaces the memcpy
with simple de-references of standard sizes to the host memory.
With this patch we attempt to provide unrestricted access to the RAM
device, allowing byte through qword access as well as unaligned
access. The assumption here is that accesses initiated by the VM are
driven by a device specific driver, which knows the device
capabilities. If unaligned accesses are not supported by the device,
we don't want them to work in a VM by performing multiple aligned
accesses to compose the unaligned access. A down-side of this
philosophy is that the xp command from the monitor attempts to use
the largest available access weidth, unaware of the underlying
device. Using memcpy had this same restriction, but at least now an
operator can dump individual registers, even if blocks of device
memory may result in access widths beyond the capabilities of a
given device (RTL NICs only support up to dword).
Reported-by: Thorsten Kohfeldt <thorsten.kohfeldt@gmx.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 4a2e242bbb)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Setting skip_dump on a MemoryRegion allows us to modify one specific
code path, but the restriction we're trying to address encompasses
more than that. If we have a RAM MemoryRegion backed by a physical
device, it not only restricts our ability to dump that region, but
also affects how we should manipulate it. Here we recognize that
MemoryRegions do not change to sometimes allow dumps and other times
not, so we replace setting the skip_dump flag with a new initializer
so that we know exactly the type of region to which we're applying
this behavior.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 21e00fa55f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
RTL8139 ethernet controller in C+ mode supports multiple
descriptor rings, each with maximum of 64 descriptors. While
processing transmit descriptor ring in 'rtl8139_cplus_transmit',
it does not limit the descriptor count and runs forever. Add
check to avoid it.
Reported-by: Andrew Henderson <hendersa@icculus.org>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit c7c3591669)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
iotest 093 contains a test that creates a throttling group with
several drives and performs I/O in all of them. This patch adds a new
test that creates a similar setup but only performs I/O in one of the
drives at the same time.
This is useful to test that the round robin algorithm is behaving
properly in these scenarios, and is specifically written using the
regression introduced in 27ccdd5259 as an example.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit a26ddb4396)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
In 27ccdd5259 the throttling fields were
moved from BlockDriverState to BlockBackend. However in a few cases
the code started using throttling fields from the active BlockBackend
instead of the round-robin token, making the algorithm behave
incorrectly.
This can cause starvation if there's a throttling group with several
drives but only one of them has I/O.
Cc: qemu-stable@nongnu.org
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 6bf77e1c2d)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
QEMU currently refuses to start with KVM-PR and only prints out
qemu: fatal: Unknown MMU model 851972
when being started there. This is because commit 4322e8ced5
("ppc: Fix 64K pages support in full emulation") introduced a new
POWERPC_MMU_64K bit to indicate support for this page size, but
it never gets cleared on KVM-PR if the host kernel does not support
this. Thus we've got to turn off this bit in the mmu_model for KVM-PR.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
(cherry picked from commit 0d594f5565)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Since commit ad739706bb, user_creatable_add_type() expects to be
given a qdict. However, if object-add is called without props, you reach
the assert: "qemu/qom/object_interfaces.c:115: user_creatable_add_type:
Assertion `qdict' failed.", because the qdict isn't created in this
case (it's optional).
Furthermore, qmp_input_visitor_new() is not meant to be called without a
dict, and a further commit will assert in this situation.
If none given, create an empty qdict in qmp to avoid the
user_creatable_add_type() assert(qdict).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20160922203927.28241-2-marcandre.lureau@redhat.com>
Tested-by: Xiao Long Jiang <zxiaol@linux.vnet.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
(cherry picked from commit e64c75a975)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
If the qio_channel_tls_new_(server|client) methods fail,
we disconnect the client. Unfortunately a missing return
means we then go on to try and run the TLS handshake on
a NULL I/O channel. This gives predictably segfaulty
results.
The main way to trigger this is to request a bogus TLS
priority string for the TLS credentials. e.g.
-object tls-creds-x509,id=tls0,priority=wibble,...
Most other ways appear impossible to trigger except
perhaps if OOM conditions cause gnutls initialization
to fail.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 660a2d83e0)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The old map's bucket locks are being unlocked *after*
that same old map has been passed to RCU for destruction.
This is a bug that can cause a segfault, since there's
no guarantee that the deletion will be deferred (e.g.
there may be no concurrent readers).
The segfault is easily triggered in RHEL6/CentOS6 with qht-test,
particularly on a single-core system or by pinning qht-test
to a single core.
Fix it by unlocking the map's bucket locks right after having
published the new map, and (crucially) before marking the map
for deletion via call_rcu().
While at it, expand qht_do_resize() to atomically do (1) a reset,
(2) a resize, or (3) a reset+resize. This simplifies the calling
code, since the new function (qht_do_resize_reset()) acquires
and releases the buckets' locks.
Note that no qht_do_reset inline is provided, since it would have
no users--qht_reset() already performs a reset without taking
ht->lock.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1475706880-10667-3-git-send-email-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 76b553b308)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Sometimes gcc doesn't pick up the fact that 'new' is properly
set if 'resize == true', which may generate an unnecessary
build warning.
Fix it by removing 'resize' and directly checking that 'new'
is non-NULL.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1475706880-10667-2-git-send-email-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit f555a9d0b3)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
We can teach Xen to drain and flush each device as it needs to, instead
of trying to flush ALL devices. This removes the last user of
blk_flush_all.
The function is therefore removed under the premise that any new uses
of blk_flush_all would be the wrong paradigm: either flush the single
device that requires flushing, or use an appropriate flush_all mechanism
from outside of the BlkBackend layer.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 49137bf684)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reimplement bdrv_flush_all for vm_stop. In contrast to blk_flush_all,
bdrv_flush_all does not have device model restrictions. This allows
us to flush and halt unconditionally without error.
This allows us to do things like migrate when we have a device with
an open tray, but has a node that may need to be flushed, or nodes
that aren't currently attached to any device and need to be flushed.
Specifically, this allows us to migrate when we have a CDROM with
an open tray.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 22af08eacf)
Conflicts:
cpus.c
* drop context dependancy on 6d0ceb80
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Commit fe1a9cbc moved the flush_all routine from the bdrv layer to the
block-backend layer. In doing so, however, the semantics of the routine
changed slightly such that flush_all now used blk_flush instead of
bdrv_flush.
blk_flush can fail if the attached device model reports that it is not
"available," (i.e. the tray is open.) This changed the semantics of
flush_all such that it can now fail for e.g. open CDROM drives.
Reintroduce bdrv_flush_all to regain the old semantics without having to
alter the behavior of blk_flush or blk_flush_all, which are already
'doing the right thing.'
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 4085f5c7a2)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When qemu uses iscsi devices in sg mode, iscsilun->block_size
is left at 0. Prior to commits cf081fca and similar, when
block limits were tracked in sectors, this did not matter:
various block limits were just left at 0. But when we started
scaling by block size, this caused SIGFPE.
Then, in a later patch, commit a5b8dd2c added an assertion to
bdrv_open_common() that request_alignment is always non-zero;
which was not true for SG mode. Rather than relax that assertion,
we can just provide a sane value (we don't know of any SG device
with a block size smaller than qemu's default sizing of 512 bytes).
One possible solution for SG mode is to just blindly skip ALL
of iscsi_refresh_limits(), since we already short circuit so
many other things in sg mode. But this patch takes a slightly
more conservative approach, and merely guarantees that scaling
will succeed, while still using multiples of the original size
where possible. Resulting limits may still be zero in SG mode
(that is, we mostly only fix block_size used as a denominator
or which affect assertions, not all uses).
Reported-by: Holger Schranz <holger@fam-schranz.de>
Signed-off-by: Eric Blake <eblake@redhat.com>
CC: qemu-stable@nongnu.org
Message-Id: <1473283640-15756-1-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 95eaa78537)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Broken in previous commit:
commit aaa4d20b49
Author: Kevin Wolf <kwolf@redhat.com>
Date: Wed Jun 1 15:21:05 2016 +0200
qcow2: Make copy_sectors() byte based
The copy_sectors() code was originally using the 'sector'
parameter for encryption, which was passed in by the caller
from the QCowL2Meta.offset field (aka the guest logical
offset).
After the change, the code is using 'cluster_offset' which
was passed in from QCow2L2Meta.alloc_offset field (aka the
host physical offset).
This would cause the data to be encrypted using an incorrect
initialization vector which will in turn cause later reads
to return garbage.
Although current qcow2 built-in encryption is blocked from
usage in the emulator, one could still hit this if writing
to the file via qemu-{img,io,nbd} commands.
Cc: qemu-stable@nongnu.org
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit bb9f8dd0e1)
Conflicts:
tests/qemu-iotests/group
* drop context dependancy on non-2.7 iotest groups
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
d1f6af6 "kvm-irqchip: simplify kvm_irqchip_add_msi_route" was a cleanup
of kvmchip routing configuration, that was mostly intended for x86.
However, it also contains a subtle change in behaviour which breaks EEH[1]
error recovery on certain VFIO passthrough devices on spapr guests. So far
it's only been seen on a BCM5719 NIC on a POWER8 server, but there may be
other hardware with the same problem. It's also possible there could be
circumstances where it causes a bug on x86 as well, though I don't know of
any obvious candidates.
Prior to d1f6af6, both vfio_msix_vector_do_use() and
vfio_add_kvm_msi_virq() used msg == NULL as a special flag to mark this
as the "dummy" vector used to make the host hardware state sync with the
guest expected hardware state in terms of MSI configuration.
Specifically that flag caused vfio_add_kvm_msi_virq() to become a no-op,
meaning the dummy irq would always be delivered via qemu. d1f6af6 changed
vfio_add_kvm_msi_virq() so it takes a vector number instead of the msg
parameter, and determines the correct message itself. The test for !msg
was removed, and not replaced with anything there or in the caller.
With an spapr guest which has a VFIO device, if an EEH error occurs on the
host hardware, then the device will be isolated then reset. This is a
combination of host and guest action, mediated by some EEH related
hypercalls. I haven't fully traced the mechanics, but somehow installing
the kvm irqchip route for the dummy irq on the BCM5719 means that after EEH
reset and recovery, at least some irqs are no longer delivered to the
guest.
In particular, the guest never gets the link up event, and so the NIC is
effectively dead.
[1] EEH (Enhanced Error Handling) is an IBM POWER server specific PCI-*
error reporting and recovery mechanism. The concept is somewhat
similar to PCI-E AER, but the details are different.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1373802
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Gavin Shan <gwshan@au1.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: qemu-stable@nongnu.org
Fixes: d1f6af6a17 ("kvm-irqchip: simplify kvm_irqchip_add_msi_route")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
(cherry picked from commit 6d17a018d0)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The cssid 255 is reserved but still valid from an architectural
point of view. However, feeding a bogus schid of 0xffffffff into
the virtio hypercall will lead to a crash:
Stack trace of thread 138363:
#0 0x00000000100d168c css_find_subch (qemu-system-s390x)
#1 0x00000000100d3290 virtio_ccw_hcall_notify
#2 0x00000000100cbf60 s390_virtio_hypercall
#3 0x000000001010ff7a handle_hypercall
#4 0x0000000010079ed4 kvm_cpu_exec (qemu-system-s390x)
#5 0x00000000100609b4 qemu_kvm_cpu_thread_fn
#6 0x000003ff8b887bb4 start_thread (libpthread.so.0)
#7 0x000003ff8b78df0a thread_start (libc.so.6)
This is because the css array was only allocated for 0..254
instead of 0..255.
Let's fix this by bumping MAX_CSSID to 255 and fencing off the
reserved cssid of 255 during css image allocation.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
(cherry picked from commit 882b3b9769)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Even if tray is not open, it can be empty (blk_is_inserted() == false).
Handle both cases correctly by replacing the s->tray_open checks with
blk_is_available(), which is an AND of the two.
Also simplify successive checks of them into blk_is_available(), in a
couple cases.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1473848224-24809-2-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit cd723b8560)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Right after main_loop ends, we release various things but keep iothread
alive. The latter is not prepared to the sudden change of resources.
Specifically, after bdrv_close_all(), virtio-scsi dataplane get a
surprise at the empty BlockBackend:
(gdb) bt
at /usr/src/debug/qemu-2.6.0/hw/scsi/virtio-scsi.c:543
at /usr/src/debug/qemu-2.6.0/hw/scsi/virtio-scsi.c:577
It is because the d->conf.blk->root is set to NULL, then
blk_get_aio_context() returns qemu_aio_context, whereas s->ctx is still
pointing to the iothread:
hw/scsi/virtio-scsi.c:543:
if (s->dataplane_started) {
assert(blk_get_aio_context(d->conf.blk) == s->ctx);
}
To fix this, let's stop iothreads before doing bdrv_close_all().
Cc: qemu-stable@nongnu.org
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1473326931-9699-1-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit dce8921b2b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The XTS cipher mode needs to be used with a cipher which has
a block size of 16 bytes. If a mis-matching block size is used,
the code will either corrupt memory beyond the IV array, or
not fully encrypt/decrypt the IV.
This fixes a memory corruption crash when attempting to use
cast5-128 with xts, since the former has an 8 byte block size.
A test case is added to ensure the cipher creation fails with
such an invalid combination.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit a5d2f44d0d)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Openstack Cinder assigns volume a 36 characters uuid as serial.
QEMU will shrinks the uuid to 20 characters, which does not match
the original uuid.
Note that there is no limit to the length of the serial number in
the SCSI spec. 20 was copy-pasted from virtio-blk which in turn was
copy-pasted from ATA; 36 is even more arbitrary. However, bumping it
up too much might cause issues (e.g. 252 seems to make sense because
then the maximum amount of returned data is 256; but who knows there's
no off-by-one somewhere for such a nicely rounded number).
Signed-off-by: Rony Weng <ronyweng@synology.com>
Message-Id: <1472457138-23386-1-git-send-email-ronyweng@synology.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 48b6206305)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
If the call to fid_to_qid() returns an error, we will call v9fs_path_free()
on uninitialized paths.
It is a regression introduced by the following commit:
56f101ecce 9pfs: handle walk of ".." in the root directory
Let's fix this by initializing dpath and path before calling fid_to_qid().
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[groug: updated the changelog to indicate this is regression and to provide
the offending commit SHA1]
Signed-off-by: Greg Kurz <groug@kaod.org>
(cherry picked from commit 13fd08e631)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The one pending element is being freed but not discarded on device
reset, which causes svq->inuse to creep up, eventually hitting the
"Virtqueue size exceeded" error.
Properly discarding the element on device reset makes sure that its
buffers are unmapped and the inuse counter stays balanced.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 104e70cae7)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
vq->inuse must be zeroed upon device reset like most other virtqueue
fields.
In theory, virtio_reset() just needs assert(vq->inuse == 0) since
devices must clean up in-flight requests during reset (requests cannot
not be leaked!).
In practice, it is difficult to achieve vq->inuse == 0 across reset
because balloon, blk, 9p, etc implement various different strategies for
cleaning up requests. Most devices call g_free(elem) directly without
telling virtio.c that the VirtQueueElement is cleaned up. Therefore
vq->inuse is not decremented during reset.
This patch zeroes vq->inuse and trusts that devices are not leaking
VirtQueueElements across reset.
I will send a follow-up series that refactors request life-cycle across
all devices and converts vq->inuse = 0 into assert(vq->inuse == 0) but
this more invasive approach is not appropriate for stable trees.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ladi Prosek <lprosek@redhat.com>
(cherry picked from commit 4b7f91ed02)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
qemu-2.7 (stable): ppc patch queue 2016-10-13
TCG for ppc does not properly implement hardware transactional memory.
It has a stub implementation in which transactions always fail.
Unfortunately in v2.7.0, HTM is advertised as being available to
guests, which means guests may incorrectly attempt to use it and hang.
This has been the case for a while, but has become more urgent with
recent (guest) Linux kernel versions which attempt to lazily enable
TM. Under TCG that now triggers the problem regularly, instead of
just when running a TM aware userspace program.
The problem is already fixed in the 2.8/master branch, by correctly
advertising HTM as not being available with TCG. This series
backports the relevant patches to the qemu-2.7 stable branch to fix
the problem there.
* tag 'ppc-for-2.7-20161013':
ppc: Check the availability of transactional memory
hw/ppc/spapr: Fix the selection of the processor features
hw/ppc/spapr: Move code related to "ibm,pa-features" to a separate function
linux-headers: update
KVM-PR currently does not support transactional memory, and the
implementation in TCG is just a fake. We should not announce TM
support in the ibm,pa-features property when running on such a
system, so disable it by default and only enable it if the KVM
implementation supports it (i.e. recent versions of KVM-HV).
These changes are based on some earlier work from Anton Blanchard
(thanks!).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
(cherry picked from commit bac3bf287a)
The current code uses pa_features_206 for POWERPC_MMU_2_06, and
for everything else, it uses pa_features_207. This is bad in some
cases because there is also a "degraded" MMU version of ISA 2.06,
called POWERPC_MMU_2_06a, which should of course use the flags for
2.06 instead. And there is also the possibility that the user runs
the pseries machine with a POWER5+ or even 970 processor. In that
case we certainly do not want to set the flags for 2.07, and rather
simply skip the setting of the pa-features property instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
(cherry picked from commit 4cbec30d76)
The function spapr_populate_cpu_dt() has become quite big
already, and since we likely have to extend the pa-features
property for every new processor generation, it is nicer
if we put the related code into a separate function.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
(cherry picked from commit 230bf719d3)
The 9P spec at http://man.cat-v.org/plan_9/5/intro says:
All directories must support walks to the directory .. (dot-dot) meaning
parent directory, although by convention directories contain no explicit
entry for .. or . (dot). The parent of the root directory of a server's
tree is itself.
This means that a client cannot walk further than the root directory
exported by the server. In other words, if the client wants to walk
"/.." or "/foo/../..", the server should answer like the request was
to walk "/".
This patch just does that:
- we cache the QID of the root directory at attach time
- during the walk we compare the QID of each path component with the root
QID to detect if we're in a "/.." situation
- if so, we skip the current component and go to the next one
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to the 9P spec http://man.cat-v.org/plan_9/5/open about the
create request:
The names . and .. are special; it is illegal to create files with these
names.
This patch causes the create and lcreate requests to fail with EINVAL if
the file name is either "." or "..".
Even if it isn't explicitly written in the spec, this patch extends the
checking to all requests that may cause a directory entry to be created:
- mknod
- rename
- renameat
- mkdir
- link
- symlink
The unlinkat request also gets patched for consistency (even if
rmdir("foo/..") is expected to fail according to POSIX.1-2001).
The various error values come from the linux manual pages.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Empty path components don't make sense for most commands and may cause
undefined behavior, depending on the backend.
Also, the walk request described in the 9P spec [1] clearly shows that
the client is supposed to send individual path components: the official
linux client never sends portions of path containing the / character for
example.
Moreover, the 9P spec [2] also states that a system can decide to restrict
the set of supported characters used in path components, with an explicit
mention "to remove slashes from name components".
This patch introduces a new name_is_illegal() helper that checks the
names sent by the client are not empty and don't contain unwanted chars.
Since 9pfs is only supported on linux hosts, only the / character is
checked at the moment. When support for other hosts (AKA. win32) is added,
other chars may need to be blacklisted as well.
If a client sends an illegal path component, the request will fail and
ENOENT is returned to the client.
[1] http://man.cat-v.org/plan_9/5/walk
[2] http://man.cat-v.org/plan_9/5/intro
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reproducer:
CFLAGS="-g3 -O0" ./configure --target-list=aarch64-softmmu,arm-softmmu --enable-vhost-net --enable-virtfs
Here CFLAGS ends up with "-O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 ... -g3 -O0"
and pc-bios/optionrom/Makefile forgets to add the -O2 it needs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit 7e8449594c, the socket connect code is blocking, because
calling socket_connect() without callback is blocking. This reverts the
commit.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In previous commit
commit c7628bff41
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Fri Oct 30 12:10:09 2015 +0100
vnc: only alloc server surface with clients connected
the VNC server was changed so that the 'vd->server' pixman
image was only allocated when a client is connected.
Since then if a client disconnects and then reconnects to
the VNC server all they will see is a black screen until
they do something that triggers a refresh. On a graphical
desktop this is not often noticed since there's many things
going on which cause a refresh. On a plain text console it
is really obvious since nothing refreshes frequently.
The problem is that the VNC server didn't update the guest
dirty bitmap, so still believes its server image is in sync
with the guest contents.
To fix this we must explicitly mark the entire guest desktop
as dirty after re-creating the server surface. Move this
logic into vnc_update_server_surface() so it is guaranteed
to be call in all code paths that re-create the surface
instead of only in vnc_dpy_switch()
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Tested-by: Peter Lieven <pl@kamp.de>
Message-id: 1471365032-18096-1-git-send-email-berrange@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
virtqueue_discard() moves vq->last_avail_idx back so the element can be
popped again. It's necessary to decrement vq->inuse to avoid "leaking"
the element count.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vq->inuse field is not migrated. Many devices don't hold
VirtQueueElements across migration so it doesn't matter that vq->inuse
starts at 0 on the destination QEMU.
At least virtio-serial, virtio-blk, and virtio-balloon migrate while
holding VirtQueueElements. For these devices we need to recalculate
vq->inuse upon load so the value is correct.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 22 Aug 2016 09:06:32 BST
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
e1000e: remove internal interrupt flag
slirp: fix segv when init failed
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since commit f6c2e66ae8, slirp uses an exit notifier to call
slirp_smb_cleanup. However, if init() failed, the notifier isn't added,
and removing it will fail:
==18447== Invalid write of size 8
==18447== at 0x7EF2B5: notifier_remove (notify.c:32)
==18447== by 0x48E80C: qemu_remove_exit_notifier (vl.c:2661)
==18447== by 0x6A2187: net_slirp_cleanup (slirp.c:134)
==18447== by 0x69419D: qemu_cleanup_net_client (net.c:338)
==18447== by 0x69445B: qemu_del_net_client (net.c:401)
==18447== by 0x6A2B81: net_slirp_init (slirp.c:366)
==18447== by 0x6A4241: net_init_slirp (slirp.c:865)
==18447== by 0x695C6D: net_client_init1 (net.c:1051)
==18447== by 0x695F6E: net_client_init (net.c:1108)
==18447== by 0x696DBA: net_init_netdev (net.c:1498)
==18447== by 0x7F1F99: qemu_opts_foreach (qemu-option.c:1116)
==18447== by 0x696E60: net_init_clients (net.c:1516)
==18447== Address 0x0 is not stack'd, malloc'd or (recently) free'd
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Since f6880b7f [qemu-log: support simple pid substitution for logs],
test-logging creates files with hard-coded names in /tmp. In the best
case, this prevents multiple developers from running "make check" on
the same machine. In the worst case, it allows for symlink attacks,
enabling an attacker to overwrite files that are writable to the
developer running "make check".
Instead of hard-coding the paths, create a temporary directory using
g_dir_make_tmp() and clean it up afterwards.
Fixes: f6880b7f ("qemu-log: support simple pid substitution for logs")
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Message-id: 1471545963-11720-3-git-send-email-silbe@linux.vnet.ibm.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We're going to make use of g_dir_make_tmp() in test-logging. Provide a
compatibility implementation of it for glib < 2.30.
May behave differently in some edge cases (e.g. pattern only at the
end of the template, the file name is not part of the error message),
but good enough in practice.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Message-id: 1471545963-11720-2-git-send-email-silbe@linux.vnet.ibm.com
[PMM: removed variable "template" which caused compilation failures
when C++ files include glib-compat.h]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In 9c37146782 I've tried to fix a broken build with older
linux-headers. However, I didn't do it properly. The solution
implemented here is to grab the enums that caused the problem
initially, and rename their values so that they are "QEMU_"
prefixed. In order to guarantee matching values with actual
enums from linux-headers, the enums are seeded with starting
values from the original enums.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 75c14d6e8a97c4ff3931d69c13eab7376968d8b4.1471593869.git.mprivozn@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch reduce CPU usage of flush operations a bit. When we have one
flush completed we should kick only next operation. We should not start
all pending operations in the hope that they will go back to wait on
wait_queue.
Also there is a technical possibility that requests will get reordered
with the previous approach. After wakeup all requests are removed from
the wait queue. They become active and they are processed one-by-one
adding to the wait queue in the same order. Though new flush can arrive
while all requests are not put into the queue.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Tested-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Message-id: 1471457214-3994-3-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The following commit
commit 3ff2f67a7c
Author: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Date: Mon Jul 18 22:39:52 2016 +0300
block: ignore flush requests when storage is clean
has introduced a regression.
There is a problem that it is still possible for 2 requests to execute
in non sequential fashion and sometimes this results in a deadlock
when bdrv_drain_one/all are called for BDS with such stalled requests.
1. Current flushed_gen and flush_started_gen is 1.
2. Request 1 enters bdrv_co_flush to with write_gen 1 (i.e. the same
as flushed_gen). It gets past flushed_gen != flush_started_gen and
sets flush_started_gen to 1 (again, the same it was before).
3. Request 1 yields somewhere before exiting bdrv_co_flush
4. Request 2 enters bdrv_co_flush with write_gen 2. It gets past
flushed_gen != flush_started_gen and sets flush_started_gen to 2.
5. Request 2 runs to completion and sets flushed_gen to 2
6. Request 1 is resumed, runs to completion and sets flushed_gen to 1.
However flush_started_gen is now 2.
From here on out flushed_gen is always != to flush_started_gen and all
further requests will wait on flush_queue. This change replaces
flush_started_gen with an explicitly tracked active flush request.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-id: 1471457214-3994-2-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
# gpg: Signature made Thu 18 Aug 2016 06:36:16 BST
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
net/net: properly handle multiple packets in net_fill_rstate()
net: vmxnet: use g_new for pkt initialisation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix 'make docker-test-mingw@fedora'
Peter,
This is the single patch that stalls patchew's mingw testing. Since it
is small and trivial, let's have it in 2.7.
Fam
# gpg: Signature made Wed 17 Aug 2016 13:13:53 BST
# gpg: using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/docker-pull-request:
curl: Cast fd to int for DPRINTF
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When network is busy, we will receive multiple packets at one time. In
that situation, we should keep trying to do the receiving instead of
finalizing only the first packet.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When network transport abstraction layer initialises pkt, the maximum
fragmentation count is not checked. This could lead to an integer
overflow causing a NULL pointer dereference. Replace g_malloc() with
g_new() to catch the multiplication overflow.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Acked-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Currently "make docker-test-mingw@fedora" has a warning like:
/tmp/qemu-test/src/block/curl.c: In function 'curl_sock_cb':
/tmp/qemu-test/src/block/curl.c:172:6: warning: format '%d' expects
argument of type 'int', but argument 4 has type 'curl_socket_t {aka long
long unsigned int}'
DPRINTF("CURL (AIO): Sock action %d on fd %d\n", action, fd);
^
cc1: all warnings being treated as errors
Cast to int to suppress it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1470027888-24381-1-git-send-email-famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
The llseek syscall takes two 32-bit arguments, offset_high
and offset_low, which must be combined to form a single
64-bit offset. Unfortunately we were combining them with
(uint64_t)arg2 << 32) | arg3
and arg3 is a signed type; this meant that when promoting
arg3 to a 64-bit type it would be sign-extended. The effect
was that if the offset happened to have bit 31 set then
this bit would get sign-extended into all of bits 63..32.
Explicitly cast arg3 to abi_ulong to avoid the erroneous
sign extension.
Reported-by: Chanho Park <parkch98@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Chanho Park <parkch98@gmail.com>
Message-id: 1470938379-1133-1-git-send-email-peter.maydell@linaro.org
In c5dff280 we tried to make us understand netlink messages more.
So we've added a code that does some translation. However, the
code assumed linux-headers to be at least version 4.4 of it
because most of the symbols there (if not all of them) were added
in just that release. This, however, breaks build on systems with
older versions of the package.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-id: 23806aac6db3baf7e2cdab4c62d6e3468ce6b4dc.1471340849.git.mprivozn@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The kvm_pv_unhalt feature doesn't work if kernel_irqchip is
disabled, so we need to report it as unsupported.
Tested-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Since commit d7a04fd7d5, tcp_chr_wait_connected() was introduced,
so vhost-user could wait until a backend started successfully. In
vhost-user case, the chr socket must be plain unix, and the chr+vhost
setup happens synchronously during qemu startup.
However, with TLS and telnet socket, initial socket setup happens
asynchronously, and s->connected is not set after the socket is
accepted. In order for tcp_chr_wait_connected() to not keep accepting
new connections and proceed with the last accepted socket, it can
check for s->ioc instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20160816083332.15088-1-marcandre.lureau@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The virtio-gpu.h file defines a macro VIRTIO_GPU_FILL_CMD
which includes a call to qemu_log_mask, but does not
include qemu/log.h. In a default configure, it is lucky
and gets qemu/log.h indirectly due to the 'log' trace
backend being enabled. If that trace backend is disabled
though, eg
./configure --enable-trace-backends=nop
Then the build will fail:
In file included from /home/berrange/src/virt/qemu/hw/display/virtio-gpu-3d.c:19:0:
/home/berrange/src/virt/qemu/hw/display/virtio-gpu-3d.c: In function ‘virgl_cmd_create_resource_2d’:
/home/berrange/src/virt/qemu/include/hw/virtio/virtio-gpu.h:138:13: error: implicit declaration of function ‘qemu_log_mask’ [-Werror=implicit-function-declaration]
qemu_log_mask(LOG_GUEST_ERROR, \
^
/home/berrange/src/virt/qemu/hw/display/virtio-gpu-3d.c:34:5: note: in expansion of macro ‘VIRTIO_GPU_FILL_CMD’
VIRTIO_GPU_FILL_CMD(c2d);
^~~~~~~~~~~~~~~~~~~
/home/berrange/src/virt/qemu/hw/display/virtio-gpu-3d.c:34:5: error: nested extern declaration of ‘qemu_log_mask’ [-Werror=nested-externs]
In file included from /home/berrange/src/virt/qemu/hw/display/virtio-gpu-3d.c:19:0:
/home/berrange/src/virt/qemu/include/hw/virtio/virtio-gpu.h:138:27: error: ‘LOG_GUEST_ERROR’ undeclared (first use in this function)
qemu_log_mask(LOG_GUEST_ERROR, \
[snip many more errors]
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1470648700-3474-1-git-send-email-berrange@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Block layer patches for 2.7.0-rc3
# gpg: Signature made Mon 15 Aug 2016 14:55:46 BST
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
iotests: Test case for wrong runtime option types
block/nbd: Store runtime option values
block/blkdebug: Store config filename
block/nbd: Use QemuOpts for runtime options
block/ssh: Use QemuOpts for runtime options
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since
commit a9c87304b7 ("build-sys: fix building with make CFLAGS=.. argument")
pc-bios/s390-ccw.img build might fail with
--- snip ---
main.o: In function `virtio_setup':
qemu/pc-bios/s390-ccw/main.c:117: undefined reference to `__stack_chk_fail'
--- snip ---
Changing the CFLAGS to QEMU_CFLAGS does the trick. We also need to
add -fno-strict-aliasing as this was filtered out.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <1471258997-5811-1-git-send-email-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
ppc patch queue for 2016-08-15
Just a single patch here, I hope this is the last ppc / spapr fix to
squeeze into qemu-2.7.
# gpg: Signature made Mon 15 Aug 2016 07:46:36 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.7-20160815:
ppc: parse cpu features once
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The various host OSes are irritatingly variable about the name
of the linker emulation we need to pass to ld's -m option to
build the i386 option ROMs. Instead of doing this via a
CONFIG ifdef, check in configure whether any of the emulation
names we know about will work and pass the right answer through
to the makefile. If we can't find one, we fall back to not trying
to build the option ROMs, in the same way we would for a non-x86
host platform.
This is in particular necessary to unbreak the build on OpenBSD,
since it wants a different answer to FreeBSD and we don't have
an existing CONFIG_ variable that distinguishes the two.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sean Bruno <sbruno@freebsd.org>
Message-id: 1470672688-6754-1-git-send-email-peter.maydell@linaro.org
Store the runtime option values in the BDRVNBDState so they can later be
used in nbd_refresh_filename() without having to directly access the
options QDict which may contain values of non-string types.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Store the configuration file's filename so it can later be used in
bdrv_refresh_filename() without having to directly access the options
QDict which may contain a value of a non-string type.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using QemuOpts will prevent qemu from crashing if the input options have
not been validated (which is the case when they are specified on the
command line or in a json: filename) and some have the wrong type.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using QemuOpts will prevent qemu from crashing if the input options have
not been validated (which is the case when they are specified on the
command line or in a json: filename) and some have the wrong type.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Considering that features are converted to global properties and
global properties are automatically applied to every new instance
of created CPU (at object_new() time), there is no point in
parsing cpu_model string every time a CPU created. So move
parsing outside CPU creation loop and do it only once.
Parsing also should be done before any CPU is created so that
features would affect the first CPU a well.
This patch does that for all PowerPC machine types.
It is based on previous work from Bharata:
https://lists.nongnu.org/archive/html/qemu-devel/2016-06/msg07564.html
Signed-off-by: Greg Kurz <groug@kaod.org>
[clg: only kept the fix for the spapr platform. support for other
platform will be added in 2.8 ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
VMs created on older versions on Xen will not have been provisioned with
pages to support creation of non-default ioreq servers. In this case
the ioreq server API is not supported and QEMU's only option is to fall
back to using the default ioreq server pages as it did prior to
commit 3996e85c ("Xen: Use the ioreq-server API when available").
This patch therefore changes the code in xen_common.h to stop considering
a failure of xc_hvm_create_ioreq_server() as a hard failure but simply
as an indication that the guest is too old to support the ioreq server
API. Instead a boolean is set to cause reversion to old behaviour such
that the default ioreq server is then used.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
emu_regs is a pointer, ARRAY_SIZE doesn't return what we expect.
Since the remaining message is enough for debugging, so just remove it.
Also tweaked the message a little.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Currently the -version command line argument prints a string ending
with "Copyright (c) 2003-2008 Fabrice Bellard". This is now some
eight years out of date; abstract it out of the several places that
print the string and update it to:
Copyright (c) 2003-2016 Fabrice Bellard and the QEMU Project developers
to reflect the work by all the QEMU Project contributors over the
last decade.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1470309276-5012-1-git-send-email-peter.maydell@linaro.org
The virtio-console.c file handles both serial consoles
and interactive consoles, since they're backed by the
same device model.
Since serial devices are expected to be reliable and
need to notify the guest when the backend is opened
or closed, the virtio-console.c file wires up support
for chardev events. This affects both serial consoles
and interactive consoles, using a network connection
based chardev backend such as 'socket', but not when
using a PTY based backend or plain 'file' backends.
When the host side is not connected the handle_output()
method in virtio-serial-bus.c will drop any data sent
by the guest, before it even reaches the virtio-console.c
code. This means that if the chardev has a logfile
configured, the data will never get logged.
Consider for example, configuring a x86_64 guest with a
plain UART serial port
-chardev socket,id=charserial1,host=127.0.0.1,port=9001,server,nowait,logfile=console1.log,logappend=on
-device isa-serial,chardev=charserial1,id=serial1
vs a s390 guest which has to use the virtio-console port
-chardev socket,id=charconsole1,host=127.0.0.1,port=9000,server,nowait,logfile=console2.log,logappend=on
-device virtconsole,chardev=charconsole1,id=console1
The isa-serial one gets data written to the log regardless
of whether a client is connected, while the virtioconsole
one only gets data written to the log when a client is
connected.
There is no need for virtio-serial-bus.c to aggressively
drop the data for console devices, as the chardev code is
prefectly capable of discarding the data itself.
So this patch changes virtconsole devices so that they
are always marked as having the host side open. This
ensures that the guest OS will always send any data it
has (Linux virtio-console hvc driver actually ignores
the host open state and sends data regardless, but we
should not rely on that), and also prevents the
virtio-serial-bus code prematurely discarding data.
The behaviour of virtserialport devices is *not* changed,
only virtconsole, because for the former, it is important
that the guest OSknow exactly when the host side is opened
/ closed so it can do any protocol re-negotiation that may
be required.
Fixes bug: https://bugs.launchpad.net/qemu/+bug/1599214
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1470241360-3574-2-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
It is generally not expected that io_submit() fails other than with
-EAGAIN, but corner cases like SELinux refusing I/O when permissions are
revoked are still possible. In this case, we shouldn't abort, but just
return an I/O error for the request.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1470741619-23231-1-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* pc-bios/optionrom/Makefile fixes
* warning fixes for __atomic_load and -1 << x in clang
* missed interrupt fix from Gonglei
* checkpatch fix from Radim and myself
# gpg: Signature made Wed 10 Aug 2016 14:54:31 BST
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
checkpatch: default to success if only warnings
checkpatch: bump most warnings to errors
CODING_STYLE, checkpatch: update line length rules
checkpatch: check for CVS keywords on all sources
checkpatch: tweak the files in which TABs are checked
timer: set vm_clock disabled default
checkpatch: ignore automatically imported Linux headers
clang: Fix warning reg. expansion to 'defined'
Disable warn about left shifts of negative values
atomic: strip "const" from variables declared with typeof
optionrom: fix compilation with mingw docker target
optionrom: add -fno-stack-protector
build-sys: fix building with make CFLAGS=.. argument
linuxboot_dma: avoid guest ABI breakage on gcc vs. clang compilation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The set_mem_table command currently does not seek a reply. Hence, there is
no easy way for a remote application to notify to QEMU when it finished
setting up memory, or if there were errors doing so.
As an example:
(1) Qemu sends a SET_MEM_TABLE to the backend (eg, a vhost-user net
application). SET_MEM_TABLE does not require a reply according to the spec.
(2) Qemu commits the memory to the guest.
(3) Guest issues an I/O operation over a new memory region which was configured on (1).
(4) The application has not yet remapped the memory, but it sees the I/O request.
(5) The application cannot satisfy the request because it does not know about those GPAs.
While a guaranteed fix would require a protocol extension (committed separately),
a best-effort workaround for existing applications is to send a GET_FEATURES
message before completing the vhost_user_set_mem_table() call.
Since GET_FEATURES requires a reply, an application that processes vhost-user
messages synchronously would probably have completed the SET_MEM_TABLE before replying.
Signed-off-by: Prerna Saxena <prerna.saxena@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This introduces the VHOST_USER_PROTOCOL_F_REPLY_ACK.
If negotiated, client applications should send a u64 payload in
response to any message that contains the "need_reply" bit set
on the message flags. Setting the payload to "zero" indicates the
command finished successfully. Likewise, setting it to "non-zero"
indicates an error.
Currently implemented only for SET_MEM_TABLE.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Prerna Saxena <prerna.saxena@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
'vhost_set_vring_enable()' tries to call function using pointer to
'vhost_ops' which can be already zeroized in 'vhost_dev_cleanup()'
while vhost disconnection.
Fix that by checking 'vhost_ops' before using. This fixes QEMU crash
on calling 'ethtool -L eth0 combined 2' if vhost disconnected.
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ppc patch queue for 2016-08-10
Here are some more last minute PAPR and ppc related fixes for
qemu-2.7. One patch makes compressed memory dumps work with guest
kernels using page sizes up to 64KiB. This is important since most
current pseries guests use a 64KiB default page size. The remainder
fix a regression with handling of CPU aliases which causes serious
problem for libvirt.
# gpg: Signature made Wed 10 Aug 2016 06:44:27 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.7-20160810:
ppc/kvm: Register also a generic spapr CPU core family type
ppc/kvm: Do not mess up the generic CPU family registration
hw/ppc/spapr: Look up CPU alias names instead of hard-coding the aliases
ppc: Introduce a function to look up CPU alias strings
spapr: remove extra type variable
ppc64: fix compressed dump with pseries kernel
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
CHK-level checks have been removed from checkpatch or bumped to
errors, so there is no effect anymore for --strict/--subjective.
Furthermore, even most WARNs have been bumped to errors, with
WARN only reserved to things that patchew probably ought not
to complain about (and that maintainers probably will notice
anyway during review if they are extreme).
Default to exiting with success even if there are WARN-level
failures, and cause --strict to fail for warnings. Maintainers
that want to have a strict 80-character limit for their subsystem
can add it to a commit hook for example.
The --subjective synonym is removed.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This only leaves a warning-level message for the extra-long lines
soft limit. Everything else is bumped up.
In the future warnings can be added for checks that can have false
positives.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Line lengths above 80 characters do exist. They are rare, but
they happen from time to time. An ignored rule is worse than an
exception to the rule, so do the latter.
Some on the list expressed their preference for a soft limit that
is slightly lower than 80 characters, to account for extra characters
in unified diffs (including three-way diffs) and for email quoting.
However, there was no consensus on this so keep the 80-character
soft limit and add a hard limit at 90.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These should apply to all files, not just C/C++. Tweak the regular
expression to check for whole words, to avoid false positives on Perl
variables starting with "Id".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Include Python and shell scripts, and make an exception for Perl
scripts we imported from Linux or elsewhere.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is a regression with the "-cpu" parameter introduced by
the spapr CPU hotplug code: We used to allow to specify a
"CPU family" name with the "-cpu" parameter when running on KVM so
that the user does not need to know the gory details of the exact
CPU version of the host CPU. For example, it was possible to
use "-cpu POWER8" on a POWER8E host CPU. This behavior does not
work anymore with the new hot-pluggable spapr-cpu-core types.
Since libvirt already heavily depends on the old behavior, this
is quite a severe regression in the QEMU parameter interface.
Let's fix it by supporting a CPU family type for the spapr-cpu-core
on KVM, too.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1363812
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The code for registering the sPAPR CPU host core type has been
added inbetween the generic CPU host core type and the generic
CPU family type. That way the instance_init and the class_init
information got lost when registering the generic CPU family
type. Fix it by moving the generic family registration before
the spapr cpu core registration code.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Hard-coding the CPU alias names in the spapr_cores[] array has
two big disadvantages:
1) We register a real type with the CPU alias name in
spapr_cpu_core_register_types() - this prevents us from registering
a CPU family name in kvm_ppc_register_host_cpu_type() with the same
name (as we do it for the non-hotpluggable CPU types).
2) It's quite cumbersome to maintain the aliases here in sync with the
ppc_cpu_aliases list from target-ppc/cpu-models.c.
So let's simply add proper alias lookup to the spapr cpu core code,
too (by checking whether the given model can be used directly, and
if not by trying to look up the given model as an alias name instead).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We will need this function to look up the aliases in the
spapr-cpu-core code, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The sPAPR CPU core typename is already available in the upper
block. Let's use it and move the check upward also.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If we don't provide the page size in target-ppc:cpu_get_dump_info(),
the default one (TARGET_PAGE_SIZE, 4KB) is used to create
the compressed dump. It works fine with Macintosh, but not with
pseries as the kernel default page size is 64KB.
Without this patch, if we generate a compressed dump in the QEMU monitor:
(qemu) dump-guest-memory -z qemu.dump
This dump cannot be read by crash:
# crash vmlinux qemu.dump
...
WARNING: cannot translate vmemmap kernel virtual addresses:
commands requiring page structure contents will fail
...
Page_size is used to determine the dumpfile's block size. The
block size needs to be at least the page size, but a multiple of page
size works fine too. For PPC64, linux supports either 4KB or 64KB software
page size. So we define the page_size to 64KB.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
(commit 80dcfb8532)
Upon migration, the code use a timer based on vm_clock for 1ns
in the future from post_load to do the event send in case host_connected
differs between migration source and target.
However, it's not guaranteed that the apic is ready to inject irqs into
the guest, and the irq line remained high, resulting in any future interrupts
going unnoticed by the guest as well.
That's because 1) the migration coroutine is not blocked when it get EAGAIN
while reading QEMUFile. 2) The vm_clock is enabled default currently, it doesn't
rely on the calling of vm_start(), that means vm_clock timers can run before
VCPUs are running.
So, let's set the vm_clock disabled default, keep the initial intention of
design for vm_clock timers.
Meanwhile, change the test-aio usecase, using QEMU_CLOCK_REALTIME instead of
QEMU_CLOCK_VIRTUAL as the block code does.
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Dr. David Alan Gilbert <dgilbert@redhat.com>
CC: qemu-stable@nongnu.org
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Message-Id: <1470728955-90600-1-git-send-email-arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux uses tabs for indentation and checkpatch always complained about
automatically imported headers. update-linux-headers.sh could be modified to
expand tabs, but there is no real reason to complain about any ugly code in
Linux headers, so skip all hunk-related checks.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It seems like there's no good reason for the compiler to exploit the
undefinedness of left shifts. GCC explicitly documents that they do not
use at all this possibility and, while they also say this is subject
to change, they have been saying this for 10 years (since the wording
appeared in the GCC 4.0 manual).
Disable these warnings by passing in -Wno-shift-negative-value.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[pranith: forward-port part of patch to 2.7]
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
With the latest clang, we have the following warning:
/home/pranith/devops/code/qemu/include/qemu/seqlock.h:62:21: warning: passing 'typeof (*&sl->sequence) *' (aka 'const unsigned int *') to parameter of type 'unsigned int *' discards qualifiers [-Wincompatible-pointer-types-discards-qualifiers]
return unlikely(atomic_read(&sl->sequence) != start);
^~~~~~~~~~~~~~~~~~~~~~~~~~
/home/pranith/devops/code/qemu/include/qemu/atomic.h:58:25: note: expanded from macro 'atomic_read'
__atomic_load(ptr, &_val, __ATOMIC_RELAXED); \
^~~~~
Stripping const is a bit tricky due to promotions, but it is doable
with either C11 _Generic or GCC extensions. Use the latter.
Reported-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[pranith: Add conversion for bool type]
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Two fixes are needed. First, mingw does not have -D_FORTIFY_SOURCE,
hence --enable-debug disables optimization. This is not acceptable
for ROMs, which should override CFLAGS to force inclusion of -O2.
Second, PE stores global constructors and destructors using the
following linker script snippet:
___CTOR_LIST__ = .; __CTOR_LIST__ = . ;
LONG (-1);*(.ctors); *(.ctor); *(SORT(.ctors.*)); LONG (0);
___DTOR_LIST__ = .; __DTOR_LIST__ = . ;
LONG (-1); *(.dtors); *(.dtor); *(SORT(.dtors.*)); LONG (0);
The LONG directives cause the .img files to be 16 bytes too large;
the recently added check to signrom.py catches this. To fix this,
replace -T and -e options with a linker script.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When calling make with a CFLAGS=.. argument, the -g/-O filter is not
applied, which may result with build failure with ASAN for example. It
could be solved with an 'override' directive on CFLAGS, but that would
actually prevent setting different CFLAGS manually.
Instead, filter the CFLAGS argument from the top-level Makefile (so
you could still call make with a different CFLAGS argument on a
rom/Makefile manually)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20160805082421.21994-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Recent GCC compiles linuxboot_dma.c to 921 bytes, while CentOS 6 needs
1029 and clang needs 1527. Because the size of the ROM, rounded to the
next 512 bytes, must match, this causes the API to break between a <1K
ROM and one that is bigger.
We want to make the ROM 1.5 KB in size, but it's better to make clang
produce leaner ROMs, because currently it is worryingly close to the limit.
To fix this prevent clang's happy inlining (which -Os cannot prevent).
This only requires adding a noinline attribute.
Second, the patch makes sure that the ROM has enough padding to prevent
ABI breakage on different compilers. The size is now hardcoded in the file
that is passed to signrom.py, as was the case before commit 6f71b77
("scripts/signrom.py: Allow option ROM checksum script to write the size
header.", 2016-05-23); signrom.py however will still pad the input to
the requested size. This ensures that the padding goes beyond the
next multiple of 512 if necessary, and also avoids the need for
-fno-toplevel-reorder which clang doesn't support. signrom.py can then
error out if the requested size is too small for the actual size of the
compiled ROM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# gpg: Signature made Tue 09 Aug 2016 08:28:39 BST
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
hw/net: Fix a heap overflow in xlnx.xps-ethernetlite
net: vmxnet3: check for device_active before write
net: check fragment length during fragmentation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The .receive callback of xlnx.xps-ethernetlite doesn't check the length
of data before calling memcpy. As a result, the NetClientState object in
heap will be overflowed. All versions of qemu with xlnx.xps-ethernetlite
will be affected.
Reported-by: chaojianhu <chaojianhu@hotmail.com>
Signed-off-by: chaojianhu <chaojianhu@hotmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Vmxnet3 device emulator does not check if the device is active,
before using it for write. It leads to a use after free issue,
if the vmxnet3_io_bar0_write routine is called after the device is
deactivated. Add check to avoid it.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Acked-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Network transport abstraction layer supports packet fragmentation.
While fragmenting a packet, it checks for more fragments from
packet length and current fragment length. It is susceptible
to an infinite loop, if the current fragment length is zero.
Add check to avoid it.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
CC: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-08-09 11:45:30 +08:00
208 changed files with 2716 additions and 863 deletions
@@ -288,6 +316,10 @@ static int vhost_user_set_mem_table(struct vhost_dev *dev,
return-1;
}
if(reply_supported){
returnprocess_message_reply(dev,msg.request);
}
return0;
}
Loaded 100 of 208 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.