Compare commits

...
210 Commits
Author SHA1 Message Date
Michael Roth 562d6b4f7f Update version for v2.1.2 release
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-25 14:52:04 -05:00
Petr Matousek 9a72433843 slirp: udp: fix NULL pointer dereference because of uninitialized socket
When guest sends udp packet with source port and source addr 0,
uninitialized socket is picked up when looking for matching and already
created udp sockets, and later passed to sosendto() where NULL pointer
dereference is hit during so->slirp->vnetwork_mask.s_addr access.

Fix this by checking that the socket is not just a socket stub.

This is CVE-2014-3640.

Signed-off-by: Petr Matousek <pmatouse@redhat.com>
Reported-by: Xavier Mehrenberger <xavier.mehrenberger@airbus.com>
Reported-by: Stephane Duverger <stephane.duverger@eads.net>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Message-id: 20140918063537.GX9321@dhcp-25-225.brq.redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 01f7cecf00)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-24 11:11:52 -05:00
Michael S. Tsirkin 00dd2b22f6 pc: leave more space for BIOS allocations
Since QEMU 2.1, we are allocating more space for ACPI tables, so no
space is left after initrd for the BIOS to allocate memory.

Besides ACPI tables, there are a few other uses of high memory in
SeaBIOS: SMBIOS tables and USB drivers use it in particular.  These uses
allocate a very small amount of memory.  Malloc metadata also lives
there.  So we need _some_ extra padding there to avoid initrd breakage,
but not much.

John Snow found a case where RHEL5 was broken by the recent change to
ACPI_TABLE_SIZE; in his case 4KB of extra padding are fine, but just to
be safe I am adding 32KB, which is roughly the same amount of padding
that was left by QEMU 2.0 and earlier.

Move initrd to leave some space for the BIOS.

Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 438f92ee9f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-23 10:48:06 -05:00
Michael S. Tsirkin 80f4d021f0 Revert "virtio: don't call device on !vm_running"
This reverts commit a1bc7b827e422e1ff065640d8ec5347c4aadfcd8.
    virtio: don't call device on !vm_running
It turns out that virtio net assumes that vm_running
is updated before device status callback in many places,
so this change leads to asserts.
Previous commit fixes the root issue that motivated
a1bc7b827e422e1ff065640d8ec5347c4aadfcd8 differently,
so there's no longer a need for this change.

In the future, we might be able to drop checking vm_running
completely, and check vm state directly.

Reported-by: Dietmar Maurer <dietmar@proxmox.com>
Cc: qemu-stable@nongnu.org
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 9e8e8c4865)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-23 10:48:06 -05:00
Michael S. Tsirkin 074e347138 virtio-net: drop assert on vm stop
On vm stop, vm_running state set to stopped
before device is notified, so callbacks can get envoked with
vm_running = false; and this is not an error.

Cc: qemu-stable@nongnu.org
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 131c5221fe)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-23 10:48:06 -05:00
Eduardo Habkost 9e8d994111 Revert "rng-egd: remove redundant free"
This reverts commit 5e490b6a50.

Cc: qemu-stable@nongnu.org
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit abb4d5f2e2)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-23 10:48:06 -05:00
Eduardo Habkost a56b9cfd86 hw/machine: Free old values of string properties
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit 556068eed0)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-23 10:48:06 -05:00
Greg Kurz 07178559a9 Revert "spapr_pci: map the MSI window in each PHB"
This patch is predicated on cc943c, which was dropped from
stable tree for other reasons.

This reverts commit 0824ca6bd1.

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-23 10:48:06 -05:00
Michael Roth 3cb451edb2 Update version for v2.1.1 release
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-10 14:30:45 -05:00
Eduardo Habkost 82d80e1f0b target-i386: Support migratable=no properly
When the "migratable" property was implemented, the behavior was tested
by changing the default on the code, but actually using the option on
the command-line (e.g. "-cpu host,migratable=false") doesn't work as
expected. This is a regression for a common use case of "-cpu host",
which is to enable features that are supported by the host CPU + kernel
before feature-specific code is added to QEMU.

Fix this by initializing the feature words for "-cpu host" on
x86_cpu_parse_featurestr(), right after parsing the CPU options.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
(cherry picked from commit 4d1b279b06)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-10 09:30:58 -05:00
Pavel Dovgaluk 5dd076a9f8 exec: Save CPUState::exception_index field
This patch adds a subsection with exception_index field to the VMState for
correct saving the CPU state.
Without this patch, simulator could miss the pending exception in the saved
virtual machine state.

Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
(cherry picked from commit 6c3bff0ed8)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-10 09:30:58 -05:00
Sebastian Tanase 257e9cfce2 pty: Fix byte loss bug when connecting to pty
When trying to print data to the pty, we first check if it is connected.
If not, we try to reconnect, but we drop the pending data even if we
have successfully reconnected; this makes us lose the first byte of the very
first transmission.
This small fix addresses the issue by checking once more if the pty is connected
after having tried to reconnect.

Signed-off-by: Sebastian Tanase <sebastian.tanase@openwide.fr>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit cf7330c759)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-10 09:30:58 -05:00
Gerd Hoffmann 1aa87d3689 spice: make sure we don't overflow ssd->buf
Related spice-only bug.  We have a fixed 16 MB buffer here, being
presented to the spice-server as qxl video memory in case spice is
used with a non-qxl card.  It's also used with qxl in vga mode.

When using display resolutions requiring more than 16 MB of memory we
are going to overflow that buffer.  In theory the guest can write,
indirectly via spice-server.  The spice-server clears the memory after
setting a new video mode though, triggering a segfault in the overflow
case, so qemu crashes before the guest has a chance to do something
evil.

Fix that by switching to dynamic allocation for the buffer.

CVE-2014-3615

Cc: qemu-stable@nongnu.org
Cc: secalert@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
(cherry picked from commit ab9509ccea)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-10 09:30:58 -05:00
Gerd Hoffmann 7fe5418d9f vbe: rework sanity checks
Plug a bunch of holes in the bochs dispi interface parameter checking.
Add a function doing verification on all registers.  Call that
unconditionally on every register write.  That way we should catch
everything, even changing one register affecting the valid range of
another register.

Some of the holes have been added by commit
e9c6149f6a.  Before that commit the
maximum possible framebuffer (VBE_DISPI_MAX_XRES * VBE_DISPI_MAX_YRES *
32 bpp) has been smaller than the qemu vga memory (8MB) and the checking
for VBE_DISPI_MAX_XRES + VBE_DISPI_MAX_YRES + VBE_DISPI_MAX_BPP was ok.

Some of the holes have been there forever, such as
VBE_DISPI_INDEX_X_OFFSET and VBE_DISPI_INDEX_Y_OFFSET register writes
lacking any verification.

Security impact:

(1) Guest can make the ui (gtk/vnc/...) use memory rages outside the vga
frame buffer as source  ->  host memory leak.  Memory isn't leaked to
the guest but to the vnc client though.

(2) Qemu will segfault in case the memory range happens to include
unmapped areas  ->  Guest can DoS itself.

The guest can not modify host memory, so I don't think this can be used
by the guest to escape.

CVE-2014-3615

Cc: qemu-stable@nongnu.org
Cc: secalert@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
(cherry picked from commit c1b886c45d)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-10 09:30:58 -05:00
Gerd Hoffmann c5042f04f7 vbe: make bochs dispi interface return the correct memory size with qxl
VgaState->vram_size is the size of the pci bar.  In case of qxl not the
whole pci bar can be used as vga framebuffer.  Add a new variable
vbe_size to handle that case.  By default (if unset) it equals
vram_size, but qxl can set vbe_size to something else.

This makes sure VBE_DISPI_INDEX_VIDEO_MEMORY_64K returns correct results
and sanity checks are done with the correct size too.

Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
(cherry picked from commit 54a85d4624)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-10 09:30:58 -05:00
Michael S. Tsirkin cf29a88391 virtio-net: purge outstanding packets when starting vhost
whenever we start vhost, virtio could have outstanding packets
queued, when they complete later we'll modify the ring
while vhost is processing it.

To prevent this, purge outstanding packets on vhost start.

Cc: qemu-stable@nongnu.org
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 086abc1ccd)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-10 09:30:58 -05:00
Michael S. Tsirkin 08743db463 net: complete all queued packets on VM stop
This completes all packets, ensuring that callbacks
will not run when VM is stopped.

Cc: qemu-stable@nongnu.org
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit ca77d85e1d)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-10 09:30:58 -05:00
Michael S. Tsirkin d9c06c0d79 net: invoke callback when purging queue
devices rely on packet callbacks eventually running,
but we violate this rule whenever we purge the queue.
To fix, invoke callbacks on all packets on purge.
Set length to 0, this way callers can detect that
this happened and re-queue if necessary.

Cc: qemu-stable@nongnu.org
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 07d8084624)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-10 09:30:58 -05:00
Michael S. Tsirkin f321710cd4 virtio: don't call device on !vm_running
On vm stop, virtio changes vm_running state
too soon, so callbacks can get envoked with
vm_running = false;

Cc: qemu-stable@nongnu.org
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 269bd822e7)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-10 09:30:58 -05:00
zhanghailiang ec48bfd57b net: Forbid dealing with packets when VM is not running
For all NICs(except virtio-net) emulated by qemu,
Such as e1000, rtl8139, pcnet and ne2k_pci,
Qemu can still receive packets when VM is not running.

If this happened in *migration's* last PAUSE VM stage, but
before the end of the migration, the new receiving packets will possibly dirty
parts of RAM which has been cached in *iovec*(will be sent asynchronously) and
dirty parts of new RAM which will be missed.
This will lead serious network fault in VM.

To avoid this, we forbid receiving packets in generic net code when
VM is not running.

Bug reproduction steps:
(1) Start a VM which configured at least one NIC
(2) In VM, open several Terminal and do *Ping IP -i 0.1*
(3) Migrate the VM repeatedly between two Hosts
And the *PING* command in VM will very likely fail with message:
'Destination HOST Unreachable', the NIC in VM will stay unavailable unless you
run 'service network restart'

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit e1d64c084b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-10 09:30:58 -05:00
zhanghailiang eb36f79d59 acpi-build: Set FORCE_APIC_CLUSTER_MODEL bit for FADT flags
If we start Windows 2008 R2 DataCenter with number of cpu less than 8,
The system will use APIC Flat Logical destination mode as default configuration,
Which has an upper limit of 8 CPUs.

The fault is that VM can not show all processors within Task Manager if
we hot-add cpus when the number of cpus in VM extends the limit of 8.

If we use cluster destination model, the problem will be solved.

Note:
This flag was introduced later than ACPI v1.0 specification while QEMU
generates v1.0 tables only, but...

linux kernel ignores this flag, so patch has no influence on it.

Tested with Win[XPsp3|Srv2003EE|Srv2008DC|Srv2008R2|Srv2012R2], there
isn't BSODs and guests boot just fine. In cases guest doesn't support
cpu-hotplug, cpu becomes visible after reboot and in case the guest
supports cpu-hotplug, it works as expected with this patch.

Cc: qemu-stable@nongnu.org
Signed-off-by: huangzhichao <huangzhichao@huawei.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-By: Igor Mammedov <imammedo@redhat.com>
(cherry picked from commit 07b81ed937)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-10 09:30:58 -05:00
Michael S. Tsirkin 34d41c1a20 vhost-scsi: init backend features earlier
As vhost core can use backend_features during init, clear it earlier to
avoid using uninitialized memory.
This use would be harmless since vhost scsi ignores the result
anyway, but initializing earlier will help prevent valgrind errors,
and make scsi and net behave similarly.

Cc: qemu-stable@nongnu.org
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 3a1655fc53)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-10 09:30:57 -05:00
Jason Wang 6f8d05a8f8 vhost_net: init acked_features to backend_features
commit 2e6d46d77e (vhost: add
vhost_get_features and vhost_ack_features) removes the step that
initializes the acked_features to backend_features.

As this field is now uninitialized, vhost initialization will sometimes
fail.

To fix, initialize acked_features on each ack.

Tested-by: Andrey Korolyov <andrey@xdel.ru>
Cc: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit b49ae9138d)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-10 09:30:57 -05:00
Jason Wang 5e83dae44e vhost_net: start/stop guest notifiers properly
commit a9f98bb5eb "vhost: multiqueue
support" changed the order of stopping the device. Previously
vhost_dev_stop would disable backend and only afterwards, unset guest
notifiers. We now unset guest notifiers while vhost is still
active. This can lose interrupts causing guest networking to fail. In
particular, this has been observed during migration.

To fix this, several other changes are needed:
- remove the hdev->started assertion in vhost.c since we may want to
start the guest notifiers before vhost starts and stop the guest
notifiers after vhost is stopped.
- introduce the vhost_net_set_vq_index() and call it before setting
guest notifiers. This is to guarantee vhost_net has the correct
virtqueue index when setting guest notifiers.

MST: fix up error handling.

Cc: qemu-stable@nongnu.org
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Andrey Korolyov <andrey@xdel.ru>
Reported-by: "Zhangjie (HZ)" <zhangjie14@huawei.com>
Tested-by: William Dauchy <william@gandi.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit cd7d1d26b0)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-10 09:30:57 -05:00
Knut Omang ff34ca00fd pci: avoid losing config updates to MSI/MSIX cap regs
Since
commit 95d6580024
    msi: Invoke msi/msix_write_config from PCI core
msix config writes are lost, the value written is always 0.

Fix pci_default_write_config to avoid this.

Cc: qemu-stable@nongnu.org
Signed-off-by: Knut Omang <knut.omang@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit d7efb7e08e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-10 09:30:57 -05:00
Michael S. Tsirkin e685d2abf7 virtio-net: don't run bh on vm stopped
commit 783e770693
    virtio-net: stop/start bh when appropriate

is incomplete: BH might execute within the same main loop iteration but
after vmstop, so in theory, we might trigger an assertion.
I was unable to reproduce this in practice,
but it seems clear enough that the potential is there, so worth fixing.

Cc: qemu-stable@nongnu.org
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit e8bcf84200)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-10 09:30:57 -05:00
Gerd Hoffmann 67cfda8776 qxl-render: add more sanity checks
Damn, the dirty rectangle values are signed integers.  So the checks
added by commit 788fbf042f are not good
enough, we also have to make sure they are not negative.

[ Note: There must be something broken in spice-server so we get
  negative values in the first place.  Bug opened:
  https://bugzilla.redhat.com/show_bug.cgi?id=1135372 ]

Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
(cherry picked from commit 503b3b33fe)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-10 09:30:57 -05:00
Peter Maydell 4fd144f8f5 target-arm: Correct Cortex-A57 ISAR5 and AA64ISAR0 ID register values
We implement the crypto extensions but were incorrectly reporting
ID register values for the Cortex-A57 which did not advertise
crypto. Use the correct values as described in the TRM.
With this fix Linux correctly detects presence of the crypto
features and advertises them in /proc/cpuinfo.

Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1408718660-7295-1-git-send-email-peter.maydell@linaro.org
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit c379621451)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-10 09:30:57 -05:00
Peter Maydell ea774b8dd0 target-arm: Fix regression that disabled VFP for ARMv5 CPUs
Commit 2c7ffc414 added support for honouring the CPACR coprocessor
access control register bits which may disable access to VFP
and Neon instructions. However it failed to account for the
fact that the CPACR is only present starting from the ARMv6
architecture version, so it accidentally disabled VFP completely
for ARMv5 CPUs like the ARM926. Linux would detect this as
"no VFP present" and probably fall back to its own emulation,
but other guest OSes might crash or misbehave.

This fixes bug LP:1359930.

Reported-by: Jakub Jermar <jakub@jermar.eu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1408714940-7192-1-git-send-email-peter.maydell@linaro.org
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit ed1f13d607)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-10 09:30:57 -05:00
Alex Williamson 3e8966df02 x86: Clear MTRRs on vCPU reset
The SDM specifies (June 2014 Vol3 11.11.5):

    On a hardware reset, the P6 and more recent processors clear the
    valid flags in variable-range MTRRs and clear the E flag in the
    IA32_MTRR_DEF_TYPE MSR to disable all MTRRs. All other bits in the
    MTRRs are undefined.

We currently do none of that, so whatever MTRR settings you had prior
to reset is what you have after reset.  Usually this doesn't matter
because KVM often ignores the guest mappings and uses write-back
anyway.  However, if you have an assigned device and an IOMMU that
allows NoSnoop for that device, KVM defers to the guest memory
mappings which are now stale after reset.  The result is that OVMF
rebooting on such a configuration takes a full minute to LZMA
decompress the firmware volume, a process that is nearly instant on
the initial boot.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 9db2efd95e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-10 09:30:57 -05:00
Alex Williamson ba8576f338 x86: kvm: Add MTRR support for kvm_get|put_msrs()
The MTRR state in KVM currently runs completely independent of the
QEMU state in CPUX86State.mtrr_*.  This means that on migration, the
target loses MTRR state from the source.  Generally that's ok though
because KVM ignores it and maps everything as write-back anyway.  The
exception to this rule is when we have an assigned device and an IOMMU
that doesn't promote NoSnoop transactions from that device to be cache
coherent.  In that case KVM trusts the guest mapping of memory as
configured in the MTRR.

This patch updates kvm_get|put_msrs() so that we retrieve the actual
vCPU MTRR settings and therefore keep CPUX86State synchronized for
migration.  kvm_put_msrs() is also used on vCPU reset and therefore
allows future modificaitons of MTRR state at reset to be realized.

Note that the entries array used by both functions was already
slightly undersized for holding every possible MSR, so this patch
increases it beyond the 28 new entries necessary for MTRR state.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit d1ae67f626)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-10 09:30:57 -05:00
Alex Williamson 07f8c97f84 x86: Use common variable range MTRR counts
We currently define the number of variable range MTRR registers as 8
in the CPUX86State structure and vmstate, but use MSR_MTRRcap_VCNT
(also 8) to report to guests the number available.  Change this to
use MSR_MTRRcap_VCNT consistently.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit d8b5c67b05)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-10 09:30:57 -05:00
William Grant 72c9c9a05e target-i386: Don't forbid NX bit on PAE PDEs and PTEs
Commit e8f6d00c30 ("target-i386: raise
page fault for reserved physical address bits") added a check that the
NX bit is not set on PAE PDPEs, but it also added it to rsvd_mask for
the rest of the function. This caused any PDEs or PTEs with NX set to be
erroneously rejected, making PAE guests with NX support unusable.

Signed-off-by: William Grant <wgrant@ubuntu.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 1844e68eca)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-10 09:30:57 -05:00
Paolo Bonzini 3d8cc86e4f vl: process -object after other backend options
QOM backends can refer to chardevs, but not vice versa.  So
process -chardev and -fsdev options before -object

This fixes the rng-egd backend to virtio-rng.

Reported-by: Amos Kong <akong@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 7b71758d79)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-10 09:30:56 -05:00
Greg Kurz 0824ca6bd1 spapr_pci: map the MSI window in each PHB
On sPAPR, virtio devices are connected to the PCI bus and use MSI-X.
Commit cc943c36fa has modified MSI-X
so that writes are made using the bus master address space and follow
the IOMMU path.

Unfortunately, the IOMMU address space address space does not have an
MSI window: the notification is silently dropped in unassigned_mem_write
instead of reaching the guest... The most visible effect is that all
virtio devices are non-functional on sPAPR since then. :(

This patch does the following:
1) map the MSI window into the IOMMU address space for each PHB
   - since each PHB instantiates its own IOMMU address space, we
     can safely map the window at a fixed address (SPAPR_PCI_MSI_WINDOW)
   - no real need to keep the MSI window setup in a separate function,
     the spapr_pci_msi_init() code moves to spapr_phb_realize().

2) kill the global MSI window as it is not needed in the end

Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
(cherry picked from commit 8c46f7ec85)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-10 09:30:28 -05:00
Stefan Hajnoczi feb633411f thread-pool: avoid deadlock in nested aio_poll() calls
The thread pool has a race condition if two elements complete before
thread_pool_completion_bh() runs:

  If element A's callback waits for element B using aio_poll() it will
  deadlock since pool->completion_bh is not marked scheduled when the
  nested aio_poll() runs.

Fix this by marking the BH scheduled while thread_pool_completion_bh()
is executing.  This way any nested aio_poll() loops will enter
thread_pool_completion_bh() and complete the remaining elements.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 3c80ca158c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-08 11:23:06 -05:00
Stefan Hajnoczi 75ada6b763 thread-pool: avoid per-thread-pool EventNotifier
EventNotifier is implemented using an eventfd or pipe.  It therefore
consumes file descriptors, which can be limited by rlimits and should
therefore be used sparingly.

Switch from EventNotifier to QEMUBH in thread-pool.c.  Originally
EventNotifier was used because qemu_bh_schedule() was not thread-safe
yet.

Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit c2e50e3d11)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-08 11:23:06 -05:00
Michael S. Tsirkin be3af755ac pc: reserve more memory for ACPI for new machine types
commit 868270f23d
    acpi-build: tweak acpi migration limits
broke kernel loading with -kernel/-initrd: it doubled
the size of ACPI tables but did not reserve
enough memory.

As a result, issues on boot and halt are observed.

Fix this up by doubling reserved memory for new machine types.

Cc: qemu-stable@nongnu.org
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 927766c7d3)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-08 11:23:05 -05:00
Gonglei bfe3e6f5e3 pcihp: fix possible array out of bounds
Prevent out-of-bounds array access on
acpi_pcihp_pci_status.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
(cherry picked from commit fa365d7cd1)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-08 11:23:05 -05:00
Michael S. Tsirkin cd4acff8d0 hostmem: set MPOL_MF_MOVE
When memory is allocated on a wrong node, MPOL_MF_STRICT
doesn't move it - it just fails the allocation.
A simple way to reproduce the failure is with mlock=on
realtime feature.

The code comment actually says: "ensure policy won't be ignored"
so setting MPOL_MF_MOVE seems like a better way to do this.

Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

(cherry picked from commit 288d332202)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-08 11:23:05 -05:00
Ben Draper 4b59161253 vmxnet3: Pad short frames to minimum size (60 bytes)
When running VMware ESXi under qemu-kvm the guest discards frames
that are too short. Short ARP Requests will be dropped, this prevents
guests on the same bridge as VMware ESXi from communicating. This patch
simply adds the padding on the network device itself.

Signed-off-by: Ben Draper <ben@xrsa.net>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 40a87c6c9b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-08 11:23:05 -05:00
Fam Zheng fab7560c35 blkdebug: Delete BH in bdrv_aio_cancel
Otherwise error_callback_bh will access the already released acb.

Cc: qemu-stable@nongnu.org
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit cbf95a0b11)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-08 11:23:05 -05:00
Stefan Hajnoczi 16c92cd629 qemu-iotests: add test case 101 for short file I/O
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 8d9eb33ca0)

Conflicts:
	tests/qemu-iotests/group

*fix up context mismatches due to lack of 099 and 103 tests

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-08 11:23:05 -05:00
Stefan Hajnoczi dea6efe883 raw-posix: fix O_DIRECT short reads
The following O_DIRECT read from a <512 byte file fails:

  $ truncate -s 320 test.img
  $ qemu-io -n -c 'read -P 0 0 512' test.img
  qemu-io: can't open device test.img: Could not read image for determining its format: Invalid argument

Note that qemu-io completes successfully without the -n (O_DIRECT)
option.

This patch fixes qemu-iotests ./check -nocache -vmdk 059.

Cc: qemu-stable@nongnu.org
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 61ed73cff4)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-08 11:23:05 -05:00
Peter Lieven 8c4edd743c block/iscsi: fix memory corruption on iscsi resize
bs->total_sectors is not yet updated at this point. resulting
in memory corruption if the volume has grown and data is written
to the newly availble areas.

CC: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit d832fb4d66)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-08 11:23:05 -05:00
Christoffer Dall 504e2a7139 arm/virt: Use PSCI v0.2 function IDs in the DT when KVM uses PSCI v0.2
The current code supplies the PSCI v0.1 function IDs in the DT even when
KVM uses PSCI v0.2.

This will break guest kernels that only support PSCI v0.1 as they will
use the IDs provided in the DT.  Guest kernels with PSCI v0.2 support
are not affected by this patch, because they ignore the function IDs in
the device tree and rely on the architecture definition.

Define QEMU versions of the constants and check that they correspond to
the Linux defines on Linux build hosts.  After this patch, both guest
kernels with PSCI v0.1 support and guest kernels with PSCI v0.2 should
work.

Tested on TC2 for 32-bit and APM Mustang for 64-bit (aarch64 guest
only).  Both cases tested with 3.14 and linus/master and verified I
could bring up 2 cpus with both guest kernels.  Also tested 32-bit with
a 3.14 host kernel with only PSCI v0.1 and both guests booted here as
well.

Cc: qemu-stable@nongnu.org
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 863714ba6c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-08 11:23:05 -05:00
Christoffer Dall 2f6d5e1c9c target-arm: Rename QEMU PSCI v0.1 definitions
The function IDs for PSCI v0.1 are exported by KVM and defined as
KVM_PSCI_FN_<something>.  To build using these defines in non-KVM code,
QEMU defines these IDs locally and check their correctness against the
KVM headers when those are available.

However, the naming scheme used for QEMU (almost) clashes with the PSCI
v0.2 definitions from Linux so to avoid unfortunate naming when we
introduce local PSCI v0.2 defines, rename the current local defines with
QEMU_ prependend and clearly identify the PSCI version as v0.1 in the
defines.

Cc: qemu-stable@nongnu.org
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit a65c9c17ce)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-08 11:23:05 -05:00
Peter Maydell 20463dc874 target-arm: Fix return address for A64 BRK instructions
When we take an exception resulting from a BRK instruction,
the architecture requires that the "preferred return address"
reported to the exception handler is the address of the BRK
itself, not the following instruction (like undefined
insns, and in contrast with SVC, HVC and SMC). Follow this,
rather than incorrectly reporting the address of the following
insn.

(We do get this correct for the A32/T32 BKPT insns.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org
(cherry picked from commit 229a138d74)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-08 11:23:05 -05:00
zhanghailiang 2a575c450e virtio-blk: fix reference a pointer which might be freed
In function virtio_blk_handle_request, it may freed memory pointed by req,
So do not access member of req after calling this function.

Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 1bdb176ac5)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-08 11:23:04 -05:00
Michael S. Tsirkin 1ad9dcec47 acpi: align RSDP
RSDP should be aligned at a 16-byte boundary.
This would by chance at the moment, fix up acpi build
to make it robust.

Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
(cherry picked from commit d67aadccfa)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-08 11:23:04 -05:00
Hu Tao ba1bc81991 numa: show hex number in error message for consistency and prefix them with 0x
The error messages before and after patch are:

before:
qemu-system-x86_64: total memory for NUMA nodes (134217728) should equal RAM size (20000000)

after:
qemu-system-x86_64: total memory for NUMA nodes (0x8000000) should equal RAM size (0x20000000)

Cc: qemu-stable@nongnu.org
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit c68233aee8)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-08 11:23:04 -05:00
Michael S. Tsirkin 948574e0d2 pc-dimm: fix up error message
- int should be printed using %d
- print actual wrong value for property

Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 988eba0f68)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-08 11:23:04 -05:00
Hu Tao 044af98ea8 pc-dimm: validate node property
If user specifies a node number that exceeds the available numa nodes in
emulated system for pc-dimm device, the device will report an invalid _PXM
to OSPM. Fix this by checking the node property value.

Cc: qemu-stable@nongnu.org
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit cfe0ffd027)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-08 11:23:04 -05:00
Hu Tao 7c68c5402a hw:i386: typo fix: MEMORY_HOPTLUG_DEVICE -> MEMORY_HOTPLUG_DEVICE
Cc: qemu-stable@nongnu.org
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 41d2f71376)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-09-08 11:23:04 -05:00
Michael Tokarev bd4740621c ide: only constrain read/write requests to drive size, not other types
Commit 58ac321135 introduced a check to ide dma processing which
constrains all requests to drive size.  However, apparently, some
valid requests (like TRIM) does not fit in this constraint, and
fails in 2.1.  So check the range only for reads and writes.

Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit d66168ed68)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-08-26 16:58:56 -05:00
Michael Tokarev e22d5dc073 l2tpv3 (configure): it is linux-specific
Some non-linux systems, for example a system with
FreeBSD kernel and glibc, may declare struct mmsghdr
(in glibc) but may not have linux-specific header
file linux/ip.h.  The actual implementation in qemu
includes this linux-specific header file unconditionally,
so compilation fails if it is not present.  Include
this header in the configure test too.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit bff6cb7296)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-08-26 16:57:28 -05:00
Alex Williamson dfd4808222 vfio: Fix MSI-X vector expansion
When new MSI-X vectors are enabled we need to disable MSI-X and
re-enable it with the correct number of vectors.  That means we need
to reprogram the eventfd triggers for each vector.  Prior to f4d45d47
vector->use tracked whether a vector was masked or unmasked and we
could always pick the KVM path when available for unmasked vectors.
Now vfio doesn't track mask state itself and vector->use and virq
remains configured even for masked vectors.  Therefore we need to ask
the MSI-X code whether a vector is masked in order to select the
correct signaling path.  As noted in the comment, MSI relies on
hardware to handle masking.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: qemu-stable@nongnu.org # QEMU 2.1
(cherry picked from commit c048be5cc9)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-08-26 16:48:12 -05:00
Stefan Hajnoczi 5f26e63b17 qdev-monitor: include QOM properties in -device FOO, help output
Update -device FOO,help to include QOM properties in addition to qdev
properties.  Devices are gradually adding more QOM properties that are
not reflected as qdev properties.

It is important to report all device properties since management tools
like libvirt use this information (and device-list-properties QMP) to
detect the presence of QEMU features.

This patch reuses the device-list-properties QMP machinery to avoid code
duplication.

Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Cole Robinson <crobinso@redhat.com>
(cherry picked from commit ef523587da)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-08-26 16:46:19 -05:00
Stefan Hajnoczi 42f7a13178 qmp: hide "hotplugged" device property from device-list-properties
The "hotplugged" device property was not reported before commit
f4eb32b590 ("qmp: show QOM properties in
device-list-properties").  Fix this difference.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 4115dd6527)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-08-26 16:46:01 -05:00
Peter Maydell 541bbb07eb Update version for v2.1.0 release
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-01 13:31:29 +01:00
Peter Maydell d24e780427 Update version for v2.1.0-rc5 release
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-29 18:23:34 +01:00
Andrew Jones 1373e140f0 hw/arm/virt: fix pl031 addr typo
pl031's base address should be 0x9010000, not 0x90010000, otherwise
it sits in ram when configuring a guest with greater than 1G.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-29 17:40:42 +01:00
Peter Maydell 8a2ca741ab Update version for v2.1.0-rc4 release
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-29 13:45:10 +01:00
Paolo Bonzini 1d80eb7a68 po: update Italian translation
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-29 13:23:33 +01:00
Aurelien Jarno 41892faf89 po: Update French translation
Add new translations for recently added messages.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-29 13:23:18 +01:00
Peter Maydell 04d1d6613f Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc migration fixes

Last minute fixes for migration.
It seems that if we don't fix it now, fixing
it in the next version will be even more painful ...

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Tue 29 Jul 2014 11:45:18 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  piix: set legacy table size for 1.7
  acpi-build: tweak acpi migration limits
  pc: future-proof migration-compatibility of ACPI tables
  acpi-build: minor code cleanup
  pc: acpi: generate AML only for PCI0 devices if PCI bridge hotplug is disabled
  bios-tables-test: fix ASL normalization false positive
  pc: hack for migration compatibility from QEMU 2.0
  acpi-dsdt: procedurally generate _PRT

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-29 12:04:02 +01:00
Michael S. Tsirkin f47337cb91 piix: set legacy table size for 1.7
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-29 12:26:12 +02:00
Michael S. Tsirkin 868270f23d acpi-build: tweak acpi migration limits
- Tweak error message for legacy machine type:
  Basically if table size exceeds the limits we set all
  bets are off for migration: e.g. it can start failing even
  within given qemu minor version simply because of a bugfix.
- Increase table size to 128k.
- Make sure we notice it long before we start getting close to the
  128k limit: warn at 64k.
- Don't fail if we exceed the limit: most people don't care about
  migration, even less people care about cross version miration.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-29 12:26:12 +02:00
Paolo Bonzini 18045fb9f4 pc: future-proof migration-compatibility of ACPI tables
This patch avoids that similar changes break QEMU again in the future.
QEMU will now hard-code 64k as the maximum ACPI table size, which
(despite being an order of magnitude smaller than 640k) should be enough
for everyone.

Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-29 12:26:12 +02:00
Michael S. Tsirkin 093a35e5fc acpi-build: minor code cleanup
Fix up and add  comments to clarify code, plus a trivial
code change for clarity.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-29 12:26:12 +02:00
Igor Mammedov 133a2da488 pc: acpi: generate AML only for PCI0 devices if PCI bridge hotplug is disabled
Fixes migration regression from QEMU-1.7 to a newer QEMUs.
SSDT table size in QEMU-1.7 doesn't change regardless of
a number of PCI bridge devices present at startup.

However in QEMU-2.0 since addition of hotplug on PCI bridges,
each PCI bridge adds ~1875 bytes to SSDT table, including
pc-i440fx-1.7 machine type where PCI bridge hotplug disabled
via compat property.
It breaks migration from "QEMU-1.7" to "QEMU-2.[01] -M pc-i440fx-1.7"
since RAMBlock size of ACPI tables on target becomes larger
then on source and migration fails with:

"Length mismatch: /rom@etc/acpi/tables: 2000 in != 3000"

error.

Fix this by generating AML only for PCI0 bus if
hotplug on PCI bridges is disabled and preserves PCI brigde
description in AML as it was done in QEMU-1.7 for pc-i440fx-1.7.

It will help to maintain size of SSDT static regardless of
number of PCI bridges on startup for pc-i440fx-1.7 machine type.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-29 12:26:12 +02:00
Paolo Bonzini cb348985ab bios-tables-test: fix ASL normalization false positive
My version of IASL (from RHEL7) puts two newlines between the head comment
and the DefinitionBlock property.  Kill all newlines after the comment,
so that normalize_asl works properly.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2014-07-29 12:26:12 +02:00
Stefan Weil 41a1a9c42c po: Update German translation
Line numbers changed, and some translations were missing after commit
3d914488ae.

Update also "Show Tabs" to a more common translation, and remove some
old unused lines at the end.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2014-07-28 23:37:17 +02:00
Dongxue Zhang 62eb3b9a34 target-mips/translate.c: Free TCG in OPC_DINSV
Free t0 and t1 in opcode OPC_DINSV.

Signed-off-by: Dongxue Zhang <elta.era@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2014-07-28 23:37:15 +02:00
Paolo Bonzini 07fb61760c pc: hack for migration compatibility from QEMU 2.0
Changing the ACPI table size causes migration to break, and the memory
hotplug work opened our eyes on how horribly we were breaking things in
2.0 already.

The ACPI table size is rounded to the next 4k, which one would think
gives some headroom.  In practice this is not the case, because the user
can control the ACPI table size (each CPU adds 97 bytes to the SSDT and
8 to the MADT) and so some "-smp" values will break the 4k boundary and
fail to migrate.  Similarly, PCI bridges add ~1870 bytes to the SSDT.

This patch concerns itself with fixing migration from QEMU 2.0.  It
computes the payload size of QEMU 2.0 and always uses that one.
The previous patch shrunk the ACPI tables enough that the QEMU 2.0 size
should always be enough; non-AML tables can change depending on the
configuration (especially MADT, SRAT, HPET) but they remain the same
between QEMU 2.0 and 2.1, so we only compute our padding based on the
sizes of the SSDT and DSDT.

Migration from QEMU 1.7 should work for guests that have a number of CPUs
other than 12, 13, 14, 54, 55, 56, 97, 98, 139, 140.  It was already
broken from QEMU 1.7 to QEMU 2.0 in the same way, though.

Even with this patch, QEMU 1.7 and 2.0 have two different ideas of
"-M pc-i440fx-2.0" when there are PCI bridges.  Igor sent a patch to
adopt the QEMU 1.7 definition.  I think distributions should apply
it if they move directly from QEMU 1.7 to 2.1+ without ever packaging
version 2.0.

Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-28 23:02:39 +02:00
Paolo Bonzini acd727e7cb acpi-dsdt: procedurally generate _PRT
This replaces the _PRT constant with a method that computes it.

The problem is that the DSDT+SSDT have grown from 2.0 to 2.1,
enough to cross the 8k barrier (we align the ACPI tables to 4k
before putting them in fw_cfg).  This causes problems with
migration and the pc-i440fx-2.0 machine type.

The solution to the problem is to hardcode 64k as the limit,
but this doesn't solve the bug with pc-i440fx-2.0.  The fix will be
for QEMU 2.1 to use exactly the same size as QEMU 2.0 for the
ACPI tables.  First, however, we must make the actual AML
equal or smaller; to do this, rewrite _PRT in a way that saves
over 1k of bytecode.

Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-28 23:02:39 +02:00
Peter Maydell f45c56e016 Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-2014-07-26' into staging
trivial patches for 2014-07-26

# gpg: Signature made Sat 26 Jul 2014 08:16:55 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 6F67 E18E 7C91 C5B1 5514  66A7 BEE5 9D74 A4C3 D7DB

* remotes/mjt/tags/trivial-patches-2014-07-26:
  qemu-options: fix another allows-to for -net l2tpv3

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-28 11:05:14 +01:00
Michael Tokarev 2f47b403bd qemu-options: fix another allows-to for -net l2tpv3
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-07-26 11:16:44 +04:00
Peter Maydell c60a57ff49 Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Here is the serial fix for 2.1.

# gpg: Signature made Fri 25 Jul 2014 13:36:23 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg:                 aka "Paolo Bonzini <bonzini@gnu.org>"

* remotes/bonzini/tags/for-upstream:
  qemu-char: ignore flow control if a PTY's slave is not connected

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-25 16:58:41 +01:00
Paolo Bonzini 62c339c527 qemu-char: ignore flow control if a PTY's slave is not connected
After commit f702e62 (serial: change retry logic to avoid concurrency,
2014-07-11), guest boot hangs if the backend is an unconnected PTY.

The reason is that PTYs do not support G_IO_HUP, and serial_xmit is
never called.  To fix this, simply invoke serial_xmit immediately
(via g_idle_source_new) when this happens.

Tested-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-25 14:36:07 +02:00
Peter Maydell 7f0b2ff724 Merge remote-tracking branch 'remotes/kraxel/tags/pull-vnc-20140725-1' into staging
vnc: fix two vnc update issues.

# gpg: Signature made Fri 25 Jul 2014 08:44:23 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-vnc-20140725-1:
  vnc update fix
  fix full frame updates for VNC clients

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-25 10:32:13 +01:00
Gerd Hoffmann 6365828003 vnc update fix
We need to remember has_updates for each vnc client.  Otherwise it might
happen that vnc_update_client(has_dirty=1) takes the first exit due to
output buffers not being flushed yet and subsequent calls with
has_dirty=0 take the second exit, wrongly assuming there is nothing to
do because the work defered in the first call is ignored.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
2014-07-25 09:43:31 +02:00
Stephan Kulow 07535a8902 fix full frame updates for VNC clients
If the client asks for !incremental frame updates, it has lost its content
so dirty doesn't matter - it has to see the full frame, so setting force_update

Signed-off-by: Stephan Kulow <coolo@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
2014-07-25 09:42:56 +02:00
Peter Maydell 3b25748663 Merge remote-tracking branch 'remotes/qmp-unstable/queue/qmp' into staging
* remotes/qmp-unstable/queue/qmp:
  docs: document missing VSERPORT_CHANGE event
  docs: document missing POWERDOWN event
  docs: document missing SPICE_MIGRATE_COMPLETED event
  docs: split SPICE_* event docs
  docs: grammar fixes to qmp-events

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-24 15:23:43 +01:00
Eric Blake 032baddea3 docs: document missing VSERPORT_CHANGE event
The VSERPORT_CHANGE event was added in e2ae6159.  The patch for
this event was prepared at a time when this file was gone, even
though it got applied immediately after dfab4892 restored this
file.  Duplicate the documentation into this file, so that
anyone using this file instead of qapi will not miss out on this
new event.

* docs/qmp/qmp-events.txt (VSERPORT_CHANGE): Add.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-07-24 10:00:33 -04:00
Eric Blake db52658b38 docs: document missing POWERDOWN event
The POWERDOWN event was first documented in 0aab9ec3.  But since
dfab4892 later restored this file to the state prior to qmp events,
and we never documented it in the past, anyone using this file
instead of qapi will miss out on this event.  Tweak the existing
wording of SHUTDOWN to match 84321831, and make the difference
between the two events apparent.

* docs/qmp/qmp-events.txt (POWERDOWN): Add.
(SHUTDOWN): Tweak.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-07-24 10:00:33 -04:00
Eric Blake 5e255004f5 docs: document missing SPICE_MIGRATE_COMPLETED event
The SPICE_MIGRATE_COMPLETED event was first documented in
7cfadb6b.  But since dfab4892 later restored this file to the
state prior to qmp events, and we never documented it in the
past, anyone using this file instead of qapi will miss out on
this event.

* docs/qmp/qmp-events.txt (SPICE_MIGRATE_COMPLETED): Add.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-07-24 10:00:15 -04:00
Eric Blake f8ecd94501 docs: split SPICE_* event docs
For consistency with the rest of this file, every event should be
listed in isolation.  Compare how commit 7cfadb6b split
SPICE_CONNECTED and SPICE_DISCONNECTED into separate qmp events.

* docs/qmp/qmp-events.txt (SPICE_CONNECTED, SPICE_DISCONNECTED):
Split.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-07-24 09:59:20 -04:00
Eric Blake 1454ac68af docs: grammar fixes to qmp-events
When converting to qmp events, commits 7cfadb6b and a6330785
fixed some grammar as part of moving text between files.  But
since dfab4892 later restored this file to the state prior to
qmp events, we have to do it again.

* docs/qmp/qmp-events.txt (RESET, SPICE_INITIALIZED): Tweak.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-07-24 09:58:51 -04:00
Peter Maydell a537d373b9 Merge remote-tracking branch 'remotes/kraxel/tags/pull-usb-20140723-1' into staging
usb: mtp: tag root property as experimental

# gpg: Signature made Wed 23 Jul 2014 07:56:21 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-usb-20140723-1:
  usb: mtp: tag root property as experimental

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-24 12:49:54 +01:00
Gerd Hoffmann cf679caf91 usb: mtp: tag root property as experimental
Reason: we don't want commit to that interface yet.  Possibly
the implementation will be switched over to use fsdev.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-07-23 08:55:40 +02:00
Peter Maydell f368c33d5a Update version for v2.1.0-rc3 release
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-22 18:17:03 +01:00
Peter Maydell ef493d5c29 hw/misc/imx_ccm.c: Add missing VMState list terminator
The VMStateDescription for the imx_ccm device was missing its
terminator. Found by static search of the codebase using
a regex based on one suggested by Ian Jackson:
  pcregrep -rMi '(?s)VMStateField(?:(?!END_OF_LIST).)*?;' $(git grep -l 'VMStateField\[\]')

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org
2014-07-22 17:53:36 +01:00
Laszlo Ersek 3afca1d6d4 vmstate_xhci_event: fix unterminated field list
"vmstate_xhci_event" was introduced in commit 37352df3 ("xhci: add live
migration support"), and first released in v1.6.0. The field list in this
VMSD is not terminated with the VMSTATE_END_OF_LIST() macro.

During normal use (ie. migration), the issue is practically invisible,
because the "vmstate_xhci_event" object (with the unterminated field list)
is only ever referenced -- via "vmstate_xhci_intr" -- if xhci_er_full()
returns true, for the "ev_buffer" test. Since that field_exists() check
(apparently) almost always returns false, we almost never traverse
"vmstate_xhci_event" during migration, which hides the bug.

However, Amit's vmstate checker forces recursion into this VMSD as well,
and the lack of VMSTATE_END_OF_LIST() breaks the field list terminator
check (field->name != NULL) in dump_vmstate_vmsd(). The result is
undefined behavior, which in my case translates to infinite recursion
(because the loop happens to overflow into "vmstate_xhci_intr", which then
links back to "vmstate_xhci_event").

Add the missing terminator.

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-22 17:34:24 +01:00
Peter Maydell 3a18d44983 Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' into staging
Patch queue for ppc - 2014-07-22

Only a single bug fix to make -mem-path only affect RAM regions.

# gpg: Signature made Tue 22 Jul 2014 16:38:04 BST using RSA key ID 03FEDC60
# gpg: Can't check signature: public key not found

* remotes/agraf/tags/signed-ppc-for-upstream:
  ppc: fix -mem-path failure

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-22 16:40:34 +01:00
Hu Tao e206ad4833 ppc: fix -mem-path failure
commit e938ba0c tried to enable -mem-path for ppc but breaked some ppc
boards.

The problems are:

1. it fails when allocating memory for rom, sram whose sizes are less
   than huge page size:

   ./ppc-softmmu/qemu-system-ppc  -m 512 -mem-path /hugepages/ \
   -kernel /home/hutao/Downloads/vmlinux-ppc -initrd \
   /home/hutao/Downloads/initrd-ppc.gz
   qemu-system-ppc: /mnt/data/projects/qemu/exec.c:1184: qemu_ram_set_idstr: Assertion `new_block' failed.

2. if there is a numa node backed by memory backend object, qemu fails
   with message:

   ./ppc-softmmu/qemu-system-ppc  -m 512 \
   -object memory-backend-file,size=512M,mem-path=/hugepages,id=f0 \
   -numa node,nodeid=0,memdev=f0 \
   -kernel /home/hutao/Downloads/vmlinux-ppc \
   -initrd /home/hutao/Downloads/initrd-ppc.gz
   qemu-system-ppc: memory backend f0 is used multiple times. Each -numa option must use a different memdev value.

This patch does following:

1. replaces memory_region_allocate_system_memory() with
   memory_region_init_ram() for rom, sram. Then only system memory
   is backed by hugepages when specifying mem-path.

2. for memory banks, allocates all ram with
   one memory_region_allocate_system_memory(), and use
   memory_region_init_alias() to initialize memory banks.

Tested machines: default(g3beige), mac99, taihu, bamboo, ref405ep.

Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-22 17:37:25 +02:00
Peter Maydell b64c670f1d Merge remote-tracking branch 'remotes/amit-virtio-rng/for-2.1' into staging
* remotes/amit-virtio-rng/for-2.1:
  virtio-rng: Add human-readable error message for negative max-bytes parameter

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-22 13:16:04 +01:00
John Snow 713e8a1022 virtio-rng: Add human-readable error message for negative max-bytes parameter
If a negative integer is used for the max_bytes parameter, QEMU currently
calls abort() and leaves behind a core dump. This patch replaces the
abort with a simple error message to make the reason for the termination
clearer. This also ensures device-hotplug with invalid input doesn't
cause qemu to quit.

There is an underlying insufficiency in the parameter parsing code of QEMU
that renders it unable to reject negative values for unsigned properties,
thus the error message "a non-negative integer below 2^63" is the most
user-friendly and correct message we can give until the underlying
insufficiency is corrected.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2014-07-22 17:18:55 +05:30
Peter Maydell 25af8e6b61 Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
One of the two pending migration fix, and a small KVM patch.

# gpg: Signature made Tue 22 Jul 2014 11:49:30 BST using RSA key ID 9B4D86F2
# gpg: Can't check signature: public key not found

* remotes/bonzini/tags/for-upstream:
  kvm-all: Use 'tmpcpu' instead of 'cpu' in sub-looping to avoid 'cpu' be NULL
  exec: fix migration with devices that use address_space_rw

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-22 12:03:45 +01:00
Chen Gang dc54e25253 kvm-all: Use 'tmpcpu' instead of 'cpu' in sub-looping to avoid 'cpu' be NULL
If kvm_arch_remove_sw_breakpoint() in CPU_FOREACH() always be fail, it
will let 'cpu' NULL. And the next kvm_arch_remove_sw_breakpoint() in
QTAILQ_FOREACH_SAFE() will get NULL parameter for 'cpu'.

And kvm_arch_remove_sw_breakpoint() can assumes 'cpu' must never be NULL,
so need define additional temporary variable for 'cpu' to avoid the case.

Cc: qemu-stable@nongnu.org
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-22 12:38:17 +02:00
Paolo Bonzini 6886867e98 exec: fix migration with devices that use address_space_rw
Devices that use address_space_rw to write large areas to memory
(as opposed to address_space_map/unmap) were broken with respect
to migration since fe680d0 (exec: Limit translation limiting in
address_space_translate to xen, 2014-05-07).  Such devices include
IDE CD-ROMs.

The reason is that invalidate_and_set_dirty (called by address_space_rw
but not address_space_map/unmap) was only setting the dirty bit for
the first page in the translation.

To fix this, introduce cpu_physical_memory_set_dirty_range_nocode that
is the same as cpu_physical_memory_set_dirty_range except it does not
muck with the DIRTY_MEMORY_CODE bitmap.  This function can be used if
the caller invalidates translations with tb_invalidate_phys_page_range.

There is another difference between cpu_physical_memory_set_dirty_range
and cpu_physical_memory_set_dirty_flag; the former includes a call
to xen_modified_memory.  This is handled separately in
invalidate_and_set_dirty, and is not needed in other callers of
cpu_physical_memory_set_dirty_range_nocode, so leave it alone.

Just one nit: now that invalidate_and_set_dirty takes care of handling
multiple pages, there is no need for address_space_unmap to wrap it
in a loop.  In fact that loop would now be O(n^2).

Reported-by: Dave Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-22 10:38:50 +02:00
Peter Maydell 35858955e6 Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-2.1' into staging
QOM and device refactorings

* Machine: Property name fixups for 2.1 ABI

# gpg: Signature made Mon 21 Jul 2014 18:00:23 BST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg:                 aka "Andreas Färber <afaerber@suse.com>"

* remotes/afaerber/tags/qom-devices-for-2.1:
  machine: Replace underscores in machine's property names

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-21 18:06:12 +01:00
Marcel Apfelbaum b0ddb8bf6b machine: Replace underscores in machine's property names
Replaced '_' with '-' to comply with QOM guidelines.
Made the conversion from command line to QMP in vl.c.

Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-07-21 18:58:36 +02:00
Peter Maydell 147fc41973 Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-2014-07-18' into staging
trivial patches for 2014-07-18

# gpg: Signature made Fri 18 Jul 2014 15:04:43 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 6F67 E18E 7C91 C5B1 5514  66A7 BEE5 9D74 A4C3 D7DB

* remotes/mjt/tags/trivial-patches-2014-07-18:
  tests: Add missing 'static' attributes (fix warnings from smatch)
  migration: Add missing 'static' attribute
  qga: Add missing 'static' attribute
  hw/usb: Add missing 'static' attribute
  doc: slirp supports ICMP echo if enabled in Linux
  qemu-img: Remove redundancy "ret = -1"
  Fix new typos in comments (found by codespell)
  slirp: Give error message if hostfwd_add/remove for unrecognized vlan/stack

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-18 16:59:29 +01:00
Peter Maydell 50a2c45da9 Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Andreas's fixes to --enable-modules, two 2.1 regression fixes, and a
new qtest.  Michael sent a pull request of his own, so I dropped
the vhost changes.

# gpg: Signature made Fri 18 Jul 2014 14:30:34 BST using RSA key ID 9B4D86F2
# gpg: Can't check signature: public key not found

* remotes/bonzini/tags/for-upstream:
  Revert "kvmclock: Ensure time in migration never goes backward"
  Revert "kvmclock: Ensure proper env->tsc value for kvmclock_current_nsec calculation"
  module: Don't complain when a module is absent
  module: Simplify module_load()
  qtest: new test for wdt_ib700
  target-i386: Allow execute from user mode when SMEP is enabled.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-18 14:46:53 +01:00
Stefan Weil 748bfb4eee tests: Add missing 'static' attributes (fix warnings from smatch)
Smatch also complains about 0 used for pointers, so replace those by
NULL in test-visitor-serialization.c, too.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-07-18 17:45:37 +04:00
Stefan Weil 7a46d042e0 migration: Add missing 'static' attribute
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-07-18 17:45:37 +04:00
Stefan Weil 13a439ec40 qga: Add missing 'static' attribute
This fixes a warning from the static code analysis (smatch).

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-07-18 17:45:37 +04:00
Stefan Weil b9b45b4a88 hw/usb: Add missing 'static' attribute
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-07-18 17:45:37 +04:00
Gernot Hillier 37cbfcce14 doc: slirp supports ICMP echo if enabled in Linux
Since QEMU 0.15, slirp (user mode networking) supports ping to the
Internet, see e6d43cfb1f

Signed-off-by: Gernot Hillier <gernot.hillier@siemens.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-07-18 17:45:37 +04:00
Chen Gang b847ae2d60 qemu-img: Remove redundancy "ret = -1"
In this case, 'ret' is already '-1', so need not do it again.

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-07-18 17:45:37 +04:00
Stefan Weil a9dd38db68 Fix new typos in comments (found by codespell)
arbitary -> arbitrary
basicly -> basically

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-07-18 17:45:36 +04:00
Peter Maydell b739ef05db slirp: Give error message if hostfwd_add/remove for unrecognized vlan/stack
If the user specified a (vlan ID, slirp stack name) tuple in a monitor
hostfwd_add/remove command and we can't find it, give the user an
error message rather than silently doing nothing.

This brings this error case in slirp_lookup() into line with the
other two.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-07-18 17:45:36 +04:00
Paolo Bonzini fa666c10f2 Revert "kvmclock: Ensure time in migration never goes backward"
This reverts commit a096b3a673.

This patch caused a hang that was fixed by commit 9b17868 (kvmclock:
Ensure proper env->tsc value for kvmclock_current_nsec calculation,
2014-06-03), and we just had to revert that commit.  Drop this one
too.

Cc: agraf@suse.de
Cc: mtosatti@redhat.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-18 15:28:03 +02:00
Paolo Bonzini 108e4c3871 Revert "kvmclock: Ensure proper env->tsc value for kvmclock_current_nsec calculation"
This reverts commit 9b1786829a.

This patch fixed a hang introduced by commit a096b3a (kvmclock: Ensure
time in migration never goes backward, 2014-05-16), but it causes
a regression in migration whose cause is not quite clear.

Because of this, I'm choosing to revert both patches.  This trades a
2.1 regression for a bug that's been there forever.

Cc: agraf@suse.de
Cc: mtosatti@redhat.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-18 15:15:14 +02:00
Andreas Färber bb2eb1892d module: Don't complain when a module is absent
The current implementation depends on a configure-time generated list of
block modules. When any of them is absent, module_load() emits a warning.

This is suboptimal because extracting code to modules was mainly done to
allow separate packaging of modules with intrusive dependencies. Absence
of optional packages then leads to absence of modules and an error
message, which users may recognize as new and report as error.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-18 14:57:35 +02:00
Andreas Färber f9e13f8fd8 module: Simplify module_load()
The file path is not used for error reporting, so we can free it
directly after use.

Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-18 14:57:35 +02:00
Paolo Bonzini f52b768782 qtest: new test for wdt_ib700
Since the "pause" watchdog action had a regression and it went
unnoticed for a while, let's add a test for it.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-18 14:57:35 +02:00
Peter Maydell e0097ea371 Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Block pull request

# gpg: Signature made Fri 18 Jul 2014 13:39:43 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/block-pull-request:
  qemu-iotests: fix 028 failure due to disk image path
  raw-posix: Fail gracefully if no working alignment is found
  block: Add Error argument to bdrv_refresh_limits()
  qcow2: Fix error path for unknown incompatible features

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-18 13:47:22 +01:00
Stefan Hajnoczi 8283c5c316 qemu-iotests: fix 028 failure due to disk image path
The disk image path is echoed by QEMU's readline when the "drive_backup
disk ${TEST_IMG}.copy" HMP command is issued.  Unfortunately it is very
hard to filter out the path due to readline's character-by-character
output (with terminal escape sequences).  Just redirect this command to
/dev/null for now.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
2014-07-18 13:27:11 +01:00
Kevin Wolf df26a35025 raw-posix: Fail gracefully if no working alignment is found
If qemu couldn't find out what O_DIRECT alignment to use with a given
file, it would run into assert(bdrv_opt_mem_align(bs) != 0); in block.c
and confuse users. This adds a more descriptive error message for such
cases.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-18 13:18:43 +01:00
Kevin Wolf 3baca89139 block: Add Error argument to bdrv_refresh_limits()
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-18 13:18:43 +01:00
Kevin Wolf 12ac6d3db7 qcow2: Fix error path for unknown incompatible features
qcow2's report_unsupported_feature() had two bugs: A 32 bit truncation
would prevent feature table entries for bits 32-63 from being used, and
it could assign errp multiple times if there was more than one unknown
feature, resulting in an error_set() assertion failure.

Fix the truncation, make sure to set the error exactly once and add a
qemu-iotests case for it.

This fixes https://bugs.launchpad.net/qemu/+bug/1342704/

Reported-by: Maria Kustova <maria.k@catit.be>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-18 13:12:15 +01:00
Peter Maydell 4d121a5498 Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,vhost,test fixes

Minor bugfixes all over the place.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri 18 Jul 2014 00:43:04 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  vhost-user: minor cleanups
  qtest: Adapt vhost-user-test to latest vhost-user changes
  vhost-user: Fix VHOST_SET_MEM_TABLE processing
  qtest: fix vhost-user-test compilation with old GLib
  fix typo: apci -> acpi
  pc_piix: Reuse pc_compat_1_2() for pc-0.1[0123]
  pc: fix qemu exiting with error when -m X < 128 with old machines types

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-18 09:35:51 +01:00
Michael S. Tsirkin cd98639f67 vhost-user: minor cleanups
assert to verify cast does not discard information
minor style fixup.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-18 02:22:24 +03:00
Nikolay Nikolaev d6970e3b00 qtest: Adapt vhost-user-test to latest vhost-user changes
A new field mmap_offset was added in the vhost-user message, we need to reflect
this change in the test too.

Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-18 02:14:15 +03:00
Nikolay Nikolaev f69a28051f vhost-user: Fix VHOST_SET_MEM_TABLE processing
qemu_get_ram_fd doesn't accept a guest physical address. ram_addr_t are
opaque values that are assigned in qemu_ram_alloc.

Find the ram_addr_t corresponding to the userspace_addr using qemu_ram_addr_from_host,
and then call qemu_get_ram_fd on it.

Thanks to Paolo Bonzini <pbonzini@redhat.com>

Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-18 02:14:15 +03:00
Igor Mammedov 5734d031aa pc: fix qemu exiting with error when -m X < 128 with old machine types
If machine doesn't support memory hotplug then starting QEMU
with initial memory less than default will make QEMU exit with
following error message:

$QEMU -m 16  -M isapc
qemu-system-i386: "-memory 'slots|maxmem'" is not supported by: isapc

Set maxram_size to initial memory value before parsing
'maxmem' option allows to keep maxmem in sync with initial
memory size if no maxmem option was specified.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
CC: Bruce Rogers <brogers@suse.com>
Reviewed-By: Bruce Rogers <brogers@suse.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-17 17:45:45 +01:00
KONRAD Frederic af52fe862f cadence_uart: check for serial backend before using it.
This checks that s->chr is not NULL before using it.

Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-17 16:36:17 +01:00
Peter Maydell 231f6927c8 Merge remote-tracking branch 'remotes/amit-migration/for-2.1' into staging
* remotes/amit-migration/for-2.1:
  vmstate static checker: detect section renames

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-17 12:17:28 +01:00
Peter Maydell 104369c8c7 Merge remote-tracking branch 'remotes/amit/for-2.1' into staging
* remotes/amit/for-2.1:
  virtio-serial-bus: keep port 0 reserved for virtconsole even on unplug

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-17 11:18:51 +01:00
Amit Shah 57d84cf353 virtio-serial-bus: keep port 0 reserved for virtconsole even on unplug
We keep port 0 reserved for compat with older guests, where only
virtio-console was expected.  Even if a system is started without a
virtio-console port, port #0 is kept aside.  However, after a
virtconsole port is unplugged, port id 0 became available, and the next
hotplug of a virtserialport caused failure due to it not being a console
port.

Steps to reproduce:

$ ./x86_64-softmmu/qemu-system-x86_64 -m 512 -cpu host -enable-kvm -device virtio-serial-pci -monitor stdio  -vnc :1
QEMU 2.0.91 monitor - type 'help' for more information
(qemu) device_add virtconsole,id=p1
(qemu) device_del p1
(qemu) device_add virtserialport,id=p1
Port number 0 on virtio-serial devices reserved for virtconsole devices for backward compatibility.
Device 'virtserialport' could not be initialized
(qemu) quit

Reported-by: dengmin <mdeng@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2014-07-16 14:32:40 +05:30
Amit Shah 79fe16c048 vmstate static checker: detect section renames
Commit 292b1634 changed the section name of "ICH9 LPC" to "ICH9-LPC",
and that causes the static checker to flag this:

Section "ICH9 LPC" does not exist in dest

This patch introduces a function that checks for section renames and
also a dictionary that maps those renames.

Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>

---
This is a small patch to a script; doesn't break qemu and helps with the
static checker, so it's a very low-risk patch for 2.1.
2014-07-16 14:29:34 +05:30
Peter Maydell 5a73480450 Update version for v2.1.0-rc2 release
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-15 18:55:37 +01:00
Peter Maydell 82172b7519 tests/Makefile: Only run vhost-user-test on Linux
vhost-user-test uses the linux/vhost.h header, so it must only be
enabled if CONFIG_LINUX is defined. (Previously it was enabled
for CONFIG_POSIX, which broke 'make check' on MacOSX.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-15 18:36:10 +01:00
Ricky Zhou b4bda1ae57 target-i386: Allow execute from user mode when SMEP is enabled.
Previously, execute would be disabled for all pages with SMEP enabled,
regardless of what mode the access took place in.

Signed-off-by: Ricky Zhou <ricky@rzhou.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-15 18:43:14 +02:00
Peter Maydell cbb46f5f49 Merge remote-tracking branch 'remotes/riku/linux-user-for-upstream' into staging
* remotes/riku/linux-user-for-upstream:
  linux-user: use TARGET_SA_ONSTACK in get_sigframe
  alloca one extra byte sockets
  linux-user: handle AF_PACKET sockaddrs in target_to_host_sockaddr
  qemu-user: Impl. setsockopt(SO_BINDTODEVICE)
  SIOCGIFINDEX: fix typo

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-15 16:49:28 +01:00
Peter Maydell 146ae00192 Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' into staging
Patch queue for ppc - 2014-07-15

Some more bug fixes during the RC phase:

  - Fix huge page mapping regressions
  - Fix Book3S thread number enumeration
  - Fix Book3S VFIO permission issue

# gpg: Signature made Tue 15 Jul 2014 15:13:54 BST using RSA key ID 03FEDC60
# gpg: Can't check signature: public key not found

* remotes/agraf/tags/signed-ppc-for-upstream:
  sPAPR/IOMMU: Fix TCE entry permission
  spapr: Enable use of huge pages
  spapr: Move RMA memory region registration code
  ppc: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory
  target-ppc: Fix number of threads per core limit

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-15 15:51:12 +01:00
Gavin Shan 27e27782f7 sPAPR/IOMMU: Fix TCE entry permission
The permission of TCE entry should exclude physical base address.
Otherwise, unmapping TCE entry can be interpreted to mapping TCE
entry wrongly for VFIO devices.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-15 16:11:59 +02:00
Alexey Kardashevskiy f92f5da108 spapr: Enable use of huge pages
0b183fc87 "memory: move mem_path handling to
memory_region_allocate_system_memory" disabled -mempath use for all
machines that do not use memory_region_allocate_system_memory() to
register RAM. Since SPAPR uses memory_region_init_ram(), the huge pages
support was disabled for it.

This replaces memory_region_init_ram()+vmstate_register_ram_global() with
memory_region_allocate_system_memory() to get huge pages back.

This changes RAM size from (ram_limit - rma_alloc_size) to ram_limit as
the previous patch moved RMA memory region allocation after RAM allocation
and therefore this change does not have immediate effect but simplifies
the code.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-15 16:11:59 +02:00
Alexey Kardashevskiy 658fa66b81 spapr: Move RMA memory region registration code
PPC970 does not support VRMA (virtual RMA) so real memory required
for SLOF to execute must be allocated by the KVM_ALLOCATE_RMA ioctl.
Later this memory is used as a part of the guest RAM area.
The RMA allocating code also registers a memory region for this piece
of RAM.

We are going to simplify memory regions layout: RMA memory region
will be a subregion in the RAM memory region, both starting from zero.
This way we will not have to take care of start address alignment for
the piece of RAM next to the RMA.

This moves memory region business closer to the RAM memory region
creation/allocation code.

As this is a mechanical patch, no change in behaviour is expected.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: fix compilation on non-kvm systems]
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-15 16:11:59 +02:00
Shreyas B. Prabhu e938ba0c35 ppc: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory
Commit 0b183fc871:"memory: move mem_path handling to
memory_region_allocate_system_memory" split memory_region_init_ram and
memory_region_init_ram_from_file. Also it moved mem-path handling a step
up from memory_region_init_ram to memory_region_allocate_system_memory.

Therefore for any board that uses memory_region_init_ram directly,
-mem-path is not supported.

Fix this by replacing memory_region_init_ram with
memory_region_allocate_system_memory.

Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-15 16:11:58 +02:00
Alexey Kardashevskiy 063cac5326 target-ppc: Fix number of threads per core limit
The number of threads per core is different for POWER6/7/8 CPUs.
Guest systems do not expect to see more threads per core than
a specific CPU supports so we need to limit this number.
This limit is implemented by ppc_get_compat_smt_threads().

However it has a problem as it checks for PCR (Processor Compatibility
Register) mask, 2.05 means 2 threads per core, 2.06 - 4 threads.
For POWER8 one would expect PCR_COMPAT_2_07 bit set and
ppc_get_compat_smt_threads() checking for it to return 8 threads
per core. But the latest PowerISA spec now is 2.07 and there is
no 2.07 compatibility mode defined, QEMU does not define it either
(will be in PowerISA 2.08).

Instead of relying on a PCR mask, this uses kvmppc_smt_threads()
which returns the maximum supported threads number for KVM or
1 for TCG.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-15 16:11:58 +02:00
Riku Voipio b545f63fa9 linux-user: use TARGET_SA_ONSTACK in get_sigframe
As reported by Laurent, which should use TARGET_SA_ONSTACK
on arm, microblaze and openrisc targets like we do on all
others. Practical matter is minimal as for almost all archs
SA_ONSTACK is 0x08000000:

http://lxr.free-electrons.com/ident?i=SA_ONSTACK

Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-07-15 17:08:41 +03:00
Peter Maydell 2c65ebe646 Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Block pull request

# gpg: Signature made Tue 15 Jul 2014 14:49:01 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/block-pull-request:
  virtio-blk: dataplane: notify guest as a batch
  virtio-blk: data-plane: fix save/set .complete_request in start
  linux-aio: Fix laio resource leak

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-15 15:06:17 +01:00
Ming Lei 5b2ffbe4d9 virtio-blk: dataplane: notify guest as a batch
Now requests are submitted as a batch, so it is natural
to notify guest as a batch too.

This may suppress interrupt notification to VM a lot:

        - in my test, decreased by ~13K/sec

Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-15 15:34:13 +02:00
Ming Lei e926d9b8c5 virtio-blk: data-plane: fix save/set .complete_request in start
The callback has to be saved and reset in virtio_blk_data_plane_start(),
otherwise dataplane's requests will be completed in qemu aio context.

Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-15 15:34:13 +02:00
Gonglei a1abf40d6b linux-aio: Fix laio resource leak
when hotplug virtio-scsi disks using laio, the aio_nr will
increase in laio_init() by io_setup(), we can see the number by
  # cat /proc/sys/fs/aio-nr
  128
if the aio_nr attach the maxnum, which found from
  # cat /proc/sys/fs/aio-max-nr
  65536
the hotplug process will fail because of aio context leak.

Fix it by io_destroy in laio_cleanup().

Reported-by: daifulai <daifulai@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-15 15:34:13 +02:00
Joakim Tjernlund 2dd08dfd9a alloca one extra byte sockets
target_to_host_sockaddr() may increase the lenth with 1 byte
for AF_UNIX sockets so allocate 1 extra byte.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-07-15 16:28:36 +03:00
Joakim Tjernlund 33a29b51c9 linux-user: handle AF_PACKET sockaddrs in target_to_host_sockaddr
Implement conversion of the AF_PACKET sockaddr subtype
in target_to_host_sockaddr.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-07-15 16:28:25 +03:00
Joakim Tjernlund 451aaf688c qemu-user: Impl. setsockopt(SO_BINDTODEVICE)
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-07-15 16:28:20 +03:00
Joakim Tjernlund 27a07827c4 SIOCGIFINDEX: fix typo
Wrong type was used in ioctl definition.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-07-15 16:26:31 +03:00
Andreas Färber 0e16297461 libqos: Fix PC PCI endianness glitches
The libqos implementation of io_read{b,w,l} and io_write{b,w,l} hooks
was relying on qtest_mem{read,write}() respectively. With d81d410 (usb:
improve ehci/uhci test) this resulted in assertion failures on ppc hosts:

 ERROR:tests/usb-hcd-ehci-test.c:78:ehci_port_test: assertion failed: ((value & mask) == (expect & mask))

 ERROR:tests/usb-hcd-ehci-test.c:128:pci_uhci_port_2: assertion failed: (pcibus != NULL)

 ERROR:tests/usb-hcd-ehci-test.c:150:pci_ehci_port_2: assertion failed: (pcibus != NULL)

qtest_read{b,w,l,q}() and qtest_write{b,w,l,q}() had been introduced
as endian-safe replacement for qtest_mem{read,write}() in I2C in
872536b (qtest: Add MMIO support). Use them for PCI as well.

Cc: Anthony Liguori <aliguori@amazon.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Fixes: c4efe1c qtest: add libqos including PCI support
Fixes: d81d410 usb: improve ehci/uhci test
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-15 14:18:15 +01:00
Peter Maydell 0a9934eef1 Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Misc 2.1 fixes regarding character/serial devices and SCSI.

# gpg: Signature made Mon 14 Jul 2014 16:26:08 BST using RSA key ID 9B4D86F2
# gpg: Can't check signature: public key not found

* remotes/bonzini/tags/for-upstream:
  serial-pci: remove memory regions from BAR before destroying them
  virtio-scsi: fix with -M pc-i440fx-2.0
  serial: change retry logic to avoid concurrency
  qemu-char: fix deadlock with "-monitor pty"
  scsi: Report error when lun number is in use

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-14 17:01:45 +01:00
Paolo Bonzini 7497bce6c2 serial-pci: remove memory regions from BAR before destroying them
Otherwise, hot-unplug of pci-serial-2x trips the assertion
in memory_region_destroy:

    (qemu) device_del gg
    (qemu) qemu-system-x86_64: /work/armbru/tmp/qemu/memory.c:1021: memory_region_destroy: Assertion `((&mr->subregions)->tqh_first == ((void *)0))' failed.
    Aborted (core dumped)

Reported-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-14 16:14:15 +02:00
Paolo Bonzini 1f4e6a069b virtio-scsi: fix with -M pc-i440fx-2.0
Right now starting a machine with virtio-scsi and a <= 2.0 machine type
fails with:

    qemu-system-x86_64: -device virtio-scsi-pci: Property .any_layout not found

This is because the any_layout bit was actually never set after
virtio-scsi was changed to support arbitrary layout for virtio buffers.

(This was just a cleanup and a preparation for virtio 1.0; no guest
actually checks the bit, but the new request parsing algorithms are
tested even with old guest).

Reported-by: David Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-14 16:14:15 +02:00
Kirill Batuzov f702e62a19 serial: change retry logic to avoid concurrency
Whenever serial_xmit fails to transmit a byte it adds a watch that would
call it again when the "line" becomes ready. This results in a retry
chain:
  serial_xmit -> add_watch -> serial_xmit
Each chain is able to transmit one character, and for every character
passed to serial by the guest driver a new chain is spawned.

The problem lays with the fact that a new chain is spawned even when
there is one already waiting on the watch. So there can be several retry
chains waiting concurrently on one "line". Every chain tries to transmit
current character, so character order is not messed up. But also every
chain increases retry counter (tsr_retry). If there are enough
concurrent chains this counter will hit MAX_XMIT_RETRY value and
the character will be dropped.

To reproduce this bug you need to feed serial output to some program
consuming it slowly enough. A python script from bug #1335444
description is an example of such program.

This commit changes retry logic in the following way to avoid
concurrency: instead of spawning a new chain for each character being
transmitted spawn only one and make it transmit characters until FIFO is
empty.

The change consists of two parts:
 - add a do {} while () loop in serial_xmit (diff is a bit erratic
   for this part, diff -w will show actual change),
 - do not call serial_xmit from serial_ioport_write if there is one
   waiting on the watch already.

This should fix another issue causing bug #1335444.

Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-14 16:14:14 +02:00
Paolo Bonzini 7b3621f47a qemu-char: fix deadlock with "-monitor pty"
qemu_chr_be_generic_open cannot be called with the write lock taken,
because it calls client code that may call qemu_chr_fe_write.  This
actually happens for the monitor:

    0x00007ffff27dbf79 in __GI_raise (sig=sig@entry=6)
    0x00007ffff27df388 in __GI_abort ()
    0x00005555555ef489 in error_exit (err=<optimized out>, msg=msg@entry=0x5555559796d0 <__func__.5959> "qemu_mutex_lock")
    0x00005555558f9080 in qemu_mutex_lock (mutex=mutex@entry=0x555556248a30)
    0x0000555555713936 in qemu_chr_fe_write (s=0x555556248a30, buf=buf@entry=0x5555563d8870 "QEMU 2.0.90 monitor - type 'help' for more information\r\n", len=56)
    0x00005555556217fd in monitor_flush_locked (mon=mon@entry=0x555556251fd0)
    0x0000555555621a12 in monitor_flush_locked (mon=0x555556251fd0)
    monitor_puts (mon=mon@entry=0x555556251fd0, str=0x55555634bfa7 "", str@entry=0x55555634bf70 "QEMU 2.0.90 monitor - type 'help' for more information\n")
    0x0000555555624359 in monitor_vprintf (mon=0x555556251fd0, fmt=<optimized out>, ap=<optimized out>)
    0x0000555555624414 in monitor_printf (mon=<optimized out>, fmt=fmt@entry=0x5555559105a0 "QEMU %s monitor - type 'help' for more information\n")
    0x0000555555629806 in monitor_event (opaque=0x555556251fd0, event=<optimized out>)
    0x000055555571343c in qemu_chr_be_generic_open (s=0x555556248a30)

To avoid this, defer the call to an idle callback, which will be
called as soon as the main loop is re-entered.  In order to simplify
the cleanup and do it in one place only, change pty_chr_close to
call pty_chr_state.

To reproduce, run with "-monitor pty", then try to read from the
slave /dev/pts/FOO that it creates.

Fixes: 9005b2a758
Reported-by: Li Liang <liangx.z.li@intel.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-14 16:13:58 +02:00
Peter Maydell 7a6d04e73f Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches for 2.1.0-rc2 (v2)

# gpg: Signature made Mon 14 Jul 2014 11:04:12 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"

* remotes/kevin/tags/for-upstream: (22 commits)
  ide: Treat read/write beyond end as invalid
  virtio-blk: Treat read/write beyond end as invalid
  virtio-blk: Bypass error action and I/O accounting on invalid r/w
  virtio-blk: Factor common checks out of virtio_blk_handle_read/write()
  dma-helpers: Fix too long qiov
  qtest: fix vhost-user-test compilation with old GLib
  tests: Fix unterminated string output visitor enum human string
  AioContext: do not rely on aio_poll(ctx, true) result to end a loop
  virtio-blk: embed VirtQueueElement in VirtIOBlockReq
  virtio-blk: avoid g_slice_new0() for VirtIOBlockReq and VirtQueueElement
  dataplane: do not free VirtQueueElement in vring_push()
  virtio-blk: avoid dataplane VirtIOBlockReq early free
  block: Assert qiov length matches request length
  qed: Make qiov match request size until backing file EOF
  qcow2: Make qiov match request size until backing file EOF
  block: Make qiov match the request size until EOF
  AioContext: speed up aio_notify
  test-aio: fix GSource-based timer test
  block: drop aio functions that operate on the main AioContext
  block: prefer aio_poll to qemu_aio_wait
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-14 13:09:29 +01:00
Peter Maydell c15a34eda0 Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20140714' into staging
A s390x/kvm bugfix for missing floating point register synchronization.

# gpg: Signature made Mon 14 Jul 2014 08:21:54 BST using RSA key ID C6F02FAF
# gpg: Can't check signature: public key not found

* remotes/cohuck/tags/s390x-20140714:
  s390x/kvm: synchronize guest floating point registers

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-14 11:04:11 +01:00
Markus Armbruster 58ac321135 ide: Treat read/write beyond end as invalid
The block layer fails such reads and writes just fine.  However, they
then get treated like valid operations that fail: the error action
gets executed.  Unwanted; reporting the error to the guest is the only
sensible action.

Reject them before passing them to the block layer.  This bypasses the
error action and I/O accounting.  Not quite correct for DMA, because
DMA can fail after some success, and when that happens, the part that
succeeded isn't counted.  Tolerable, because I/O accounting is an
inconsistent mess anyway.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-07-14 12:03:21 +02:00
Markus Armbruster 3c2daac0b9 virtio-blk: Treat read/write beyond end as invalid
The block layer fails such reads and writes just fine.  However, they
then get treated like valid operations that fail: the error action
gets executed.  Unwanted; reporting the error to the guest is the only
sensible action.

Reject them before passing them to the block layer.  This bypasses the
error action and I/O accounting.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-07-14 12:03:21 +02:00
Markus Armbruster 42e38c1fd0 virtio-blk: Bypass error action and I/O accounting on invalid r/w
When a device model's I/O operation fails, we execute the error
action.  This lets layers above QEMU implement thin provisioning, or
attempt to correct errors before they reach the guest.  But when the
I/O operation fails because it's invalid, reporting the error to the
guest is the only sensible action.

If the guest's read or write asks for an invalid sector range, fail
the request right away, without considering the error action.  No
change with error action BDRV_ACTION_REPORT.

Furthermore, bypass I/O accounting, because we want to track only I/O
that actually reaches the block layer.

The next commit will extend "invalid sector range" to cover attempts
to read/write beyond the end of the medium.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-07-14 12:03:21 +02:00
Markus Armbruster d0e14376ee virtio-blk: Factor common checks out of virtio_blk_handle_read/write()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-07-14 12:03:21 +02:00
Kevin Wolf 58f423fbd5 dma-helpers: Fix too long qiov
If the size of the scatter/gather list isn't a multiple of 512, the
number of sectors for the block layer request is rounded down, resulting
in a qiov that doesn't match the request length. Truncate the qiov to the
new length of the request.

This fixes the IDE qtest case /x86_64/ide/bmdma/short_prdt.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2014-07-14 12:03:21 +02:00
Nikolay Nikolaev 80504dcaa1 qtest: fix vhost-user-test compilation with old GLib
Mising G_TIME_SPAN_SECOND definition breaks the RHEL6 compilation as GLib
version before 2.26 does not have it. In such case just define it.

Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-07-14 12:03:21 +02:00
Andreas Färber b8864245b1 tests: Fix unterminated string output visitor enum human string
The buffer was being allocated of size string length plus two.
Around the string two quotes were being added, but no terminating NUL.
It was then compared using g_assert_cmpstr(), resulting in fairly random
assertion failures:

 ERROR:tests/test-string-output-visitor.c:213:test_visitor_out_enum: assertion failed (str == str_human): ("\"value1\"" == "\"value1\"\001EEEEEEEEEEEEEE\0171")

There is no g_assert_cmpnstr() counterpart, so use g_strdup_printf()
for safely assembling the string in the first place.

Cc: Hu Tao <hutao@cn.fujitsu.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Suggested-by: Eric Blake <eblake@redhat.com>
Fixes: b4900c0 tests: add human format test for string output visitor
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-07-14 12:03:20 +02:00
Paolo Bonzini acfb23ad3d AioContext: do not rely on aio_poll(ctx, true) result to end a loop
Currently, whenever aio_poll(ctx, true) has completed all pending
work it returns true *and* the next call to aio_poll(ctx, true)
will not block.

This invariant has its roots in qemu_aio_flush()'s implementation
as "while (qemu_aio_wait()) {}".  However, qemu_aio_flush() does
not exist anymore and bdrv_drain_all() is implemented differently;
and this invariant is complicated to maintain and subtly different
from the return value of GMainLoop's g_main_context_iteration.

All calls to aio_poll(ctx, true) except one are guarded by a
while() loop checking for a request to be incomplete, or a
BlockDriverState to be idle.  The one remaining call (in
iothread.c) uses this to delay the aio_context_release/acquire
pair until the AioContext is quiescent, however:

- we can do the same just by using non-blocking aio_poll,
  similar to how vl.c invokes main_loop_wait

- it is buggy, because it does not ensure that the AioContext
  is released between an aio_notify and the next time the
  iothread goes to sleep.  This leads to hangs when stopping
  the dataplane thread.

In the end, these semantics are a bad match for the current
users of AioContext.  So modify that one exception in iothread.c,
which also fixes the hangs, as well as the testcase so that
it use the same idiom as the actual QEMU code.

Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-07-14 12:03:20 +02:00
Stefan Hajnoczi f897bf751f virtio-blk: embed VirtQueueElement in VirtIOBlockReq
The memory allocation between hw/block/virtio-blk.c,
hw/block/dataplane/virtio-blk.c, and hw/virtio/dataplane/vring.c is
messy.  Structs are allocated in different files than they are freed in.
This is risky and makes memory leaks easier.

Embed VirtQueueElement in VirtIOBlockReq to reduce the amount of memory
allocation we need to juggle.  This also makes vring.c and virtio.c
slightly more similar.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-07-14 12:03:20 +02:00
Stefan Hajnoczi 869d66af53 virtio-blk: avoid g_slice_new0() for VirtIOBlockReq and VirtQueueElement
In commit de6c8042ec ("virtio-blk: Avoid
zeroing every request structure") we avoided the 40 KB memset when
allocating VirtIOBlockReq.

The memset was reintroduced in commit
671ec3f056 ("virtio-blk: Convert
VirtIOBlockReq.elem to pointer").

It must be fixed again to avoid a performance regression.

Cc: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-07-14 12:03:20 +02:00
Stefan Hajnoczi abd764250f dataplane: do not free VirtQueueElement in vring_push()
VirtQueueElement is allocated in vring_pop() so it seems to make sense
that vring_push() should free it.  Alas, virtio-blk frees
VirtQueueElement itself in virtio_blk_free_request().

This patch solves a double-free assertion in glib's g_slice_free().

Rename vring_free_element() to vring_unmap_element() since it no longer
frees the VirtQueueElement.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-07-14 12:03:20 +02:00
Stefan Hajnoczi 0a21ea3289 virtio-blk: avoid dataplane VirtIOBlockReq early free
VirtIOBlockReq is freed later by virtio_blk_free_request() in
hw/block/virtio-blk.c.  Remove this extraneous g_slice_free().

This patch fixes the following segfault:

  0x00005555556373af in virtio_blk_rw_complete (opaque=0x5555565ff5e0, ret=0) at hw/block/virtio-blk.c:99
  99          bdrv_acct_done(req->dev->bs, &req->acct);
  (gdb) print req
  $1 = (VirtIOBlockReq *) 0x5555565ff5e0
  (gdb) print req->dev
  $2 = (VirtIOBlock *) 0x0
  (gdb) bt
  #0  0x00005555556373af in virtio_blk_rw_complete (opaque=0x5555565ff5e0, ret=0) at hw/block/virtio-blk.c:99
  #1  0x0000555555840ebe in bdrv_co_em_bh (opaque=0x5555566152d0) at block.c:4675
  #2  0x000055555583de77 in aio_bh_poll (ctx=ctx@entry=0x5555563a8150) at async.c:81
  #3  0x000055555584b7a7 in aio_poll (ctx=0x5555563a8150, blocking=blocking@entry=true) at aio-posix.c:188
  #4  0x00005555556e520e in iothread_run (opaque=0x5555563a7fd8) at iothread.c:41
  #5  0x00007ffff42ba124 in start_thread () from /usr/lib/libpthread.so.0
  #6  0x00007ffff16d14bd in clone () from /usr/lib/libc.so.6

Reported-by: Max Reitz <mreitz@redhat.com>
Cc: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-07-14 12:03:20 +02:00
Kevin Wolf 8eb029c26e block: Assert qiov length matches request length
At least raw-posix relies on this because it can allocate bounce buffers
based on the request length, but access it using all of the qiov entries
later.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-07-14 12:03:20 +02:00
Kevin Wolf f06ee3d4aa qed: Make qiov match request size until backing file EOF
If a QED image has a shorter backing file and a read request to
unallocated clusters goes across EOF of the backing file, the backing
file sees a shortened request and the rest is filled with zeros.
However, the original too long qiov was used with the shortened request.

This patch makes the qiov size match the request size, avoiding a
potential buffer overflow in raw-posix.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2014-07-14 12:03:20 +02:00
Kevin Wolf 44deba5a52 qcow2: Make qiov match request size until backing file EOF
If a qcow2 image has a shorter backing file and a read request to
unallocated clusters goes across EOF of the backing file, the backing
file sees a shortened request and the rest is filled with zeros.
However, the original too long qiov was used with the shortened request.

This patch makes the qiov size match the request size, avoiding a
potential buffer overflow in raw-posix.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-07-14 12:03:20 +02:00
Kevin Wolf 33f461e0c5 block: Make qiov match the request size until EOF
If a read request goes across EOF, the block driver sees a shortened
request that stops at EOF (the rest is memsetted in block.c), however
the original qiov was used for this request.

This patch makes the qiov size match the request size, avoiding a
potential buffer overflow in raw-posix.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-07-14 12:03:20 +02:00
Fam Zheng 2039511b8f scsi: Report error when lun number is in use
In the case that the lun number is taken by another scsi device, don't
release the existing device siliently, but report an error to user.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-14 11:54:57 +02:00
Jason J. Herne 85ad6230b3 s390x/kvm: synchronize guest floating point registers
Add code to kvm_arch_get_registers and kvm_arch_put_registers to
save/restore floating point registers. This missing sync was
unnoticed until migration of userspace that uses fprs.

Signed-off-by: Jason J. Herne <jjherne@us.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[Update patch to latest upstream]
Cc: qemu-stable@nongnu.org
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-07-14 09:15:38 +02:00
Nikolay Nikolaev 0e3cd8334a qtest: fix vhost-user-test compilation with old GLib
Mising G_TIME_SPAN_SECOND definition breaks the RHEL6 compilation as GLib
version before 2.26 does not have it. In such case just define it.

Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-14 00:42:54 +03:00
Hu Tao 75902802c2 fix typo: apci -> acpi
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

MST: rebase
2014-07-11 21:31:55 +03:00
Eduardo Habkost faab459797 pc_piix: Reuse pc_compat_1_2() for pc-0.1[0123]
pc-0.13 and older were missing some compat code that was present on
newer machine-types:

* x86_cpu_compat_disable_kvm_features(FEAT_1_ECX, CPUID_EXT_X2APIC);
  (pc-i440fx-1.7 and older)
  (added by commit ef02ef5f45)
* x86_cpu_compat_set_features("n270", FEAT_1_ECX, 0, CPUID_EXT_MOVBE);
  (pc-i440fx-1.4 and older)
  (added by commit 4458c23672
* x86_cpu_compat_set_features("Westmere", FEAT_1_ECX, 0, CPUID_EXT_PCLMULQDQ);
  (pc-i440fx-1.4 and older)
  (added by commit 56383703c0)

Instead of duplicating the code from the previous pc_compat_*()
functions, we can now reuse pc_compat_1_2() and fix those issues.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-11 21:13:00 +03:00
Igor Mammedov 4ec6ee5ace pc: fix qemu exiting with error when -m X < 128 with old machines types
If machine doesn't support memory hotplug then staring QEMU
with initial memory less than default will make QEMU exit with
following error message:

$QEMU -m 16  -M isapc
qemu-system-i386: "-memory 'slots|maxmem'" is not supported by: isapc

Set maxram_size to initial memory value before parsing
'maxmem' option allows to keep maxmem in sync with initial
memory size if no maxmem option was specified.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
CC: Bruce Rogers <brogers@suse.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-11 21:05:14 +03:00
Peter Maydell ab6d3749c4 Merge remote-tracking branch 'remotes/kraxel/tags/pull-vga-20140711-1' into staging
vga: some cirrus fixes.

# gpg: Signature made Fri 11 Jul 2014 10:38:32 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-vga-20140711-1:
  cirrus: Fix host CPU blits
  cirrus: Fix build of debug code
  cirrus_vga: adding sanity check for vram size

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-11 17:50:38 +01:00
Peter Maydell aee230d707 Merge remote-tracking branch 'remotes/kraxel/tags/pull-usb-20140711-1' into staging
mtp: linux guest detection fix

# gpg: Signature made Fri 11 Jul 2014 11:32:20 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-usb-20140711-1:
  mtp: linux guest detection fix.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-11 16:01:38 +01:00
Peter Maydell 42ca32f776 Merge remote-tracking branch 'remotes/spice/tags/pull-spice-20140711-1' into staging
spice: auth fixes

# gpg: Signature made Fri 11 Jul 2014 10:17:15 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/spice/tags/pull-spice-20140711-1:
  spice: auth fixes

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-11 14:50:18 +01:00
Peter Maydell 22df3452dc Merge remote-tracking branch 'remotes/kraxel/tags/pull-gtk-20140711-1' into staging
ui/gtk: Restore keyboard focus after Page change

# gpg: Signature made Fri 11 Jul 2014 09:46:21 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-gtk-20140711-1:
  ui/gtk: Restore keyboard focus after Page change

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-11 13:48:07 +01:00
Gerd Hoffmann 13d54125a3 mtp: linux guest detection fix.
Attach a name to the MTP interface (android phones have this too).

With this patch recent linux guests such as fedora 20 happily detect and
use the device.  It shows up in nautilus file manager automatically, and
simple-mtpfs can mount it.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-07-11 12:31:41 +02:00
John Snow e72b59fa93 ui/gtk: Restore keyboard focus after Page change
(Resending for correct email addresses via MAINTAINERS ...)

In the GTK UI, after changing focus to the qemu monitor Notebook Page,
when restoring focus to the virtual machine page, the keyboard focus is lost
to a hidden GTK widget. Focus can only be restored to the virtual machine by
pressing "tab" or any of the four directional arrow keys.

Clicking in the window or grabbing/ungrabbing input does not restore keyboard
focus to the child widget.

This patch adjusts the Notebook page switching callback to automatically
steal keyboard focus on the Page switch event, so that keyboard input
does not appear to break or disappear after tabbing to the QEMU monitor.

Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-07-11 10:44:00 +02:00
Benjamin Herrenschmidt d16136d22a cirrus: Fix host CPU blits
Commit b2eb849d4b
"CVE-2007-1320 - Cirrus LGD-54XX "bitblt" heap overflow" broke
cpu to video blits.

When the ROP function is called from cirrus_bitblt_cputovideo_next(),
we pass 0 for the pitch but only operate on one line at a time. The
added test was tripping because after the initial substraction, the
pitch becomes negative. Make the test only trip when the height is
larger than one (ie. the pitch is actually used).

This fixes HW cursor support in Windows NT4.0 (which otherwise was
a white rectangle) and general display of icons in that OS when using
8bpp mode.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-07-11 10:17:02 +02:00
Benjamin Herrenschmidt e8ee4b68be cirrus: Fix build of debug code
Use PRIu64 to print uint64_t

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-07-11 10:17:01 +02:00
Gonglei f61d82c2df cirrus_vga: adding sanity check for vram size
when configure a invalid vram size for cirrus card, such as less
2 MB, which will crash qemu. Follow the real hardware, the cirrus
card has 4 MB video memory. Also for backward compatibility, accept
8 MB and 16 MB vram size.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-07-11 10:17:01 +02:00
Gerd Hoffmann b1ea7b79e1 spice: auth fixes
Set auth to sasl when sasl is enabled, this makes "info spice" correctly
display sasl auth.  Also throw an error in case someone tries to set
a spice password via monitor without auth mode being "spice".

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-07-11 10:12:47 +02:00
Peter Maydell 74aeb37de0 Merge remote-tracking branch 'remotes/kvm/uq/master' into staging
* remotes/kvm/uq/master:
  qtest: fix vhost-user-test compilation with old GLib
  mc146818rtc: register the clock reset notifier on the right clock
  oslib-posix: Fix new compiler error with -Wclobbered
  target-i386: Add "kvmclock-stable-bit" feature bit name
  Enforce stack protector usage
  watchdog: fix deadlock with -watchdog-action pause
  mips_malta: Catch kernels linked at wrong address
  mips_malta: Remove incorrect KVM T&E references
  mips/kvm: Disable FPU on reset with KVM
  mips/kvm: Init EBase to correct KSEG0

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-10 17:37:16 +01:00
Nikolay Nikolaev 0a58991a5f qtest: fix vhost-user-test compilation with old GLib
Mising G_TIME_SPAN_SECOND definition breaks the RHEL6 compilation as GLib
version before 2.26 does not have it. In such case just define it.

Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-10 17:06:33 +02:00
Paolo Bonzini 13c0cbaec5 mc146818rtc: register the clock reset notifier on the right clock
Commit 884f17c (aio / timers: Convert rtc_clock to be a QEMUClockType,
2013-08-21) erroneously changed an occurrence of rtc_clock to
QEMU_CLOCK_REALTIME, which broke the RTC reset notifier in
mc146818rtc.  Fix this.

I redid the patch myself since the original reporter did not sign
off on his.

Cc: qemu-stable@nongnu.org
Reported-by: Lb peace <peaceustc@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-10 17:06:33 +02:00
Stefan Weil b7bf8f5657 oslib-posix: Fix new compiler error with -Wclobbered
Newer versions of gcc report a warning (or an error with -Werror) when
compiler option -Wclobbered (or -Wextra) is active:

util/oslib-posix.c:372:12: error:
 variable ‘hpagesize’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]

The rewritten code fixes this warning: variable 'hpagesize' is now set and
used in a block without any call of sigsetjmp or similar functions.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-10 17:06:33 +02:00
Eduardo Habkost 8248c36a5d target-i386: Add "kvmclock-stable-bit" feature bit name
KVM_FEATURE_CLOCKSOURCE_STABLE_BIT is enabled by default and supported
by KVM. But not having a name defined makes QEMU treat it as an unknown
and unmigratable feature flag (as any unknown feature may possibly
require state to be migrated), and disable it by default on "-cpu host".

As a side-effect, the new name also makes the flag configurable,
allowing the user to disable it (which may be useful for testing or for
compatibility with old kernels).

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-10 17:06:33 +02:00
Miroslav Rezanina 3b463a3fa8 Enforce stack protector usage
If --enable-stack-protector is used is used, configure script try to use
--fstack-protector-strong. In case it's not supported, --fstack-protector-all
is enabled. If both protectors are not supported, configure does not use
any protector at all without any notification.

This patch reports error when user requests stack protector to be used and
both protector modes are not supported. Behavior is not changed in case
user do not use any of --enable-stack-protector/--disable-stack-protector.

Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
[Fix non-POSIX operator in test. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-10 17:06:29 +02:00
Andreas Färber 9e99c5fd70 tests: Fix unterminated string output visitor enum human string
The buffer was being allocated of size string length plus two.
Around the string two quotes were being added, but no terminating NUL.
It was then compared using g_assert_cmpstr(), resulting in fairly random
assertion failures:

 ERROR:tests/test-string-output-visitor.c:213:test_visitor_out_enum: assertion failed (str == str_human): ("\"value1\"" == "\"value1\"\001EEEEEEEEEEEEEE\0171")

There is no g_assert_cmpnstr() counterpart, so use g_strdup_printf()
for safely assembling the string in the first place.

Cc: Hu Tao <hutao@cn.fujitsu.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Suggested-by: Eric Blake <eblake@redhat.com>
Fixes: b4900c0 tests: add human format test for string output visitor
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-10 11:53:14 +01:00
Paolo Bonzini 30e5210a70 watchdog: fix deadlock with -watchdog-action pause
qemu_clock_enable says:

/* Disabling the clock will wait for related timerlists to stop
 * executing qemu_run_timers.  Thus, this functions should not
 * be used from the callback of a timer that is based on @clock.
 * Doing so would cause a deadlock.
 */

and it indeed does: vm_stop uses qemu_clock_enable on QEMU_CLOCK_VIRTUAL
and watchdogs are based on QEMU_CLOCK_VIRTUAL, and we get a deadlock.

Use qemu_system_vmstop_request_prepare()/qemu_system_vmstop_request()
instead; yet another alternative could be a BH.

I checked other occurrences of vm_stop and they should not have this
problem.  RUN_STATE_IO_ERROR could in principle (it depends on the
code in the drivers) but it has been fixed by commit 2bd3bce, "block:
asynchronously stop the VM on I/O errors", 2014-06-05.

Tested-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-09 18:17:08 +02:00
James Hogan f7f152458e mips_malta: Catch kernels linked at wrong address
Add error reporting if the wrong type of kernel is provided for the
current mode of acceleration.

Currently a KVM kernel linked at 0x40000000 can't be used with TCG, and
a normal kernel linked at 0x80000000 can't be used with KVM.

Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-09 18:17:08 +02:00
James Hogan fbdb1d9555 mips_malta: Remove incorrect KVM T&E references
Fix the error message and code comments relating to KVM not supporting
booting from the flash mapping when no kernel is provided. The issue is
a general MIPS KVM issue and isn't specific to the Trap & Emulate
version of MIPS KVM.

Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-09 18:17:08 +02:00
James Hogan 0e928b12c9 mips/kvm: Disable FPU on reset with KVM
KVM doesn't yet support the MIPS FPU, or writing to the guest's Config1
register which contains the FPU implemented bit. Clear QEMU's version of
that bit on reset and display a warning that the FPU has been disabled.

The previous incorrect Config1 CP0 register value wasn't being passed to
KVM yet, however we should ensure it is set correctly now to reduce the
risk of breaking migration/loadvm to a future version of QEMU/Linux that
does support it.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-09 18:17:04 +02:00
Paolo Bonzini 0ceb849bd3 AioContext: speed up aio_notify
In many cases, the call to event_notifier_set in aio_notify is unnecessary.
In particular, if we are executing aio_dispatch, or if aio_poll is not
blocking, we know that we will soon get to the next loop iteration (if
necessary); the thread that hosts the AioContext's event loop does not
need any nudging.

The patch includes a Promela formal model that shows that this really
works and does not need any further complication such as generation
counts.  It needs a memory barrier though.

The generation counts are not needed because any change to
ctx->dispatching after the memory barrier is okay for aio_notify.
If it changes from zero to one, it is the right thing to skip
event_notifier_set.  If it changes from one to zero, the
event_notifier_set is unnecessary but harmless.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-07-09 15:50:11 +02:00
Paolo Bonzini ef508f427b test-aio: fix GSource-based timer test
The current test depends too much on the implementation of the AioContext
GSource.  Just iterate on the main loop until the callback has been invoked
the right number of times.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-07-09 15:50:11 +02:00
Paolo Bonzini 87f68d3182 block: drop aio functions that operate on the main AioContext
The main AioContext should be accessed explicitly via qemu_get_aio_context().
Most of the time, using it is not the right thing to do.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-07-09 15:50:11 +02:00
Paolo Bonzini b47ec2c456 block: prefer aio_poll to qemu_aio_wait
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-07-09 15:50:11 +02:00
Kevin Wolf 01fb2705bd block: Fix bdrv_is_allocated() return value
bdrv_is_allocated() should return either 0 or 1 in successful cases.
We're lucky that currently, the callers that rely on this (e.g. because
they check for ret == 1) don't seem to break badly. They just might skip
some optimisation or in the case of qemu-io 'map' print separate lines
where a single line would suffice. In theory, a wrong allocation status
could lead to image corruption with certain operations, so let's fix
this quickly.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2014-07-09 15:50:11 +02:00
Kevin Wolf d40593dd90 block/backup: Fix hang for unaligned image size
When doing a block backup of an image with an unaligned size (with
respect to the BACKUP_CLUSTER_SIZE), qemu would check the allocation
status of sectors after the end of the image. bdrv_is_allocated()
returns a result that is valid for 0 sectors in this case, so the backup
job ran into an endless loop.

Stop looping when seeing a result valid for 0 sectors, we're at EOF then.

The test case looks somewhat unrelated at first sight because I
originally tried to reproduce a different suspected bug that turned out
to not exist. Still a good test case and it accidentally found this one.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2014-07-09 15:50:11 +02:00
James Hogan 0a2672b7ea mips/kvm: Init EBase to correct KSEG0
The EBase CP0 register is initialised to 0x80000000, however with KVM
the guest's KSEG0 is at 0x40000000. The incorrect value doesn't get
passed to KVM yet as KVM doesn't implement the EBase register, however
we should set it correctly now so as not to break migration/loadvm to a
future version of QEMU that does support EBase.

Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-05 11:53:07 +02:00
167 changed files with 2646 additions and 2627 deletions

No files matched your search

+1 -1
View File
@@ -1 +1 @@
2.0.91
2.1.2
+35 -3
View File
@@ -125,7 +125,7 @@ static bool aio_dispatch(AioContext *ctx)
bool progress = false;
/*
* We have to walk very carefully in case qemu_aio_set_fd_handler is
* We have to walk very carefully in case aio_set_fd_handler is
* called while we're walking.
*/
node = QLIST_FIRST(&ctx->aio_handlers);
@@ -175,27 +175,56 @@ static bool aio_dispatch(AioContext *ctx)
bool aio_poll(AioContext *ctx, bool blocking)
{
AioHandler *node;
bool was_dispatching;
int ret;
bool progress;
was_dispatching = ctx->dispatching;
progress = false;
/* aio_notify can avoid the expensive event_notifier_set if
* everything (file descriptors, bottom halves, timers) will
* be re-evaluated before the next blocking poll(). This happens
* in two cases:
*
* 1) when aio_poll is called with blocking == false
*
* 2) when we are called after poll(). If we are called before
* poll(), bottom halves will not be re-evaluated and we need
* aio_notify() if blocking == true.
*
* The first aio_dispatch() only does something when AioContext is
* running as a GSource, and in that case aio_poll is used only
* with blocking == false, so this optimization is already quite
* effective. However, the code is ugly and should be restructured
* to have a single aio_dispatch() call. To do this, we need to
* reorganize aio_poll into a prepare/poll/dispatch model like
* glib's.
*
* If we're in a nested event loop, ctx->dispatching might be true.
* In that case we can restore it just before returning, but we
* have to clear it now.
*/
aio_set_dispatching(ctx, !blocking);
/*
* If there are callbacks left that have been queued, we need to call them.
* Do not call select in this case, because it is possible that the caller
* does not need a complete flush (as is the case for qemu_aio_wait loops).
* does not need a complete flush (as is the case for aio_poll loops).
*/
if (aio_bh_poll(ctx)) {
blocking = false;
progress = true;
}
/* Re-evaluate condition (1) above. */
aio_set_dispatching(ctx, !blocking);
if (aio_dispatch(ctx)) {
progress = true;
}
if (progress && !blocking) {
return true;
goto out;
}
ctx->walking_handlers++;
@@ -234,9 +263,12 @@ bool aio_poll(AioContext *ctx, bool blocking)
}
/* Run dispatch even if there were no readable fds to run timers */
aio_set_dispatching(ctx, true);
if (aio_dispatch(ctx)) {
progress = true;
}
out:
aio_set_dispatching(ctx, was_dispatching);
return progress;
}
+3 -3
View File
@@ -102,7 +102,7 @@ bool aio_poll(AioContext *ctx, bool blocking)
/*
* If there are callbacks left that have been queued, we need to call then.
* Do not call select in this case, because it is possible that the caller
* does not need a complete flush (as is the case for qemu_aio_wait loops).
* does not need a complete flush (as is the case for aio_poll loops).
*/
if (aio_bh_poll(ctx)) {
blocking = false;
@@ -115,7 +115,7 @@ bool aio_poll(AioContext *ctx, bool blocking)
/*
* Then dispatch any pending callbacks from the GSource.
*
* We have to walk very carefully in case qemu_aio_set_fd_handler is
* We have to walk very carefully in case aio_set_fd_handler is
* called while we're walking.
*/
node = QLIST_FIRST(&ctx->aio_handlers);
@@ -177,7 +177,7 @@ bool aio_poll(AioContext *ctx, bool blocking)
blocking = false;
/* we have to walk very carefully in case
* qemu_aio_set_fd_handler is called while we're walking */
* aio_set_fd_handler is called while we're walking */
node = QLIST_FIRST(&ctx->aio_handlers);
while (node) {
AioHandler *tmp;
+18 -1
View File
@@ -26,6 +26,7 @@
#include "block/aio.h"
#include "block/thread-pool.h"
#include "qemu/main-loop.h"
#include "qemu/atomic.h"
/***********************************************************/
/* bottom halves (can be seen as timers which expire ASAP) */
@@ -247,9 +248,25 @@ ThreadPool *aio_get_thread_pool(AioContext *ctx)
return ctx->thread_pool;
}
void aio_set_dispatching(AioContext *ctx, bool dispatching)
{
ctx->dispatching = dispatching;
if (!dispatching) {
/* Write ctx->dispatching before reading e.g. bh->scheduled.
* Optimization: this is only needed when we're entering the "unsafe"
* phase where other threads must call event_notifier_set.
*/
smp_mb();
}
}
void aio_notify(AioContext *ctx)
{
event_notifier_set(&ctx->notifier);
/* Write e.g. bh->scheduled before reading ctx->dispatching. */
smp_mb();
if (!ctx->dispatching) {
event_notifier_set(&ctx->notifier);
}
}
static void aio_timerlist_notify(void *opaque)
+1 -1
View File
@@ -304,7 +304,7 @@ host_memory_backend_memory_complete(UserCreatable *uc, Error **errp)
/* ensure policy won't be ignored in case memory is preallocated
* before mbind(). note: MPOL_MF_STRICT is ignored on hugepages so
* this doesn't catch hugepage case. */
unsigned flags = MPOL_MF_STRICT;
unsigned flags = MPOL_MF_STRICT | MPOL_MF_MOVE;
/* check for invalid host-nodes and policies and give more verbose
* error messages than mbind(). */
+1
View File
@@ -169,6 +169,7 @@ static void rng_egd_set_chardev(Object *obj, const char *value, Error **errp)
if (b->opened) {
error_set(errp, QERR_PERMISSION_DENIED);
} else {
g_free(s->chr_name);
s->chr_name = g_strdup(value);
}
}
+1 -1
View File
@@ -861,7 +861,7 @@ static bool block_is_active(void *opaque)
return block_mig_state.blk_enable == 1;
}
SaveVMHandlers savevm_block_handlers = {
static SaveVMHandlers savevm_block_handlers = {
.set_params = block_set_params,
.save_live_setup = block_save_setup,
.save_live_iterate = block_save_iterate,
+41 -14
View File
@@ -471,7 +471,7 @@ int bdrv_create(BlockDriver *drv, const char* filename,
co = qemu_coroutine_create(bdrv_create_co_entry);
qemu_coroutine_enter(co, &cco);
while (cco.ret == NOT_DONE) {
qemu_aio_wait();
aio_poll(qemu_get_aio_context(), true);
}
}
@@ -508,19 +508,24 @@ int bdrv_create_file(const char *filename, QemuOpts *opts, Error **errp)
return ret;
}
int bdrv_refresh_limits(BlockDriverState *bs)
void bdrv_refresh_limits(BlockDriverState *bs, Error **errp)
{
BlockDriver *drv = bs->drv;
Error *local_err = NULL;
memset(&bs->bl, 0, sizeof(bs->bl));
if (!drv) {
return 0;
return;
}
/* Take some limits from the children as a default */
if (bs->file) {
bdrv_refresh_limits(bs->file);
bdrv_refresh_limits(bs->file, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
bs->bl.opt_transfer_length = bs->file->bl.opt_transfer_length;
bs->bl.opt_mem_alignment = bs->file->bl.opt_mem_alignment;
} else {
@@ -528,7 +533,11 @@ int bdrv_refresh_limits(BlockDriverState *bs)
}
if (bs->backing_hd) {
bdrv_refresh_limits(bs->backing_hd);
bdrv_refresh_limits(bs->backing_hd, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
bs->bl.opt_transfer_length =
MAX(bs->bl.opt_transfer_length,
bs->backing_hd->bl.opt_transfer_length);
@@ -539,10 +548,8 @@ int bdrv_refresh_limits(BlockDriverState *bs)
/* Then let the driver override it */
if (drv->bdrv_refresh_limits) {
return drv->bdrv_refresh_limits(bs);
drv->bdrv_refresh_limits(bs, errp);
}
return 0;
}
/*
@@ -993,7 +1000,13 @@ static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
goto free_and_fail;
}
bdrv_refresh_limits(bs);
bdrv_refresh_limits(bs, &local_err);
if (local_err) {
error_propagate(errp, local_err);
ret = -EINVAL;
goto free_and_fail;
}
assert(bdrv_opt_mem_align(bs) != 0);
assert((bs->request_alignment != 0) || bs->sg);
return 0;
@@ -1154,7 +1167,7 @@ void bdrv_set_backing_hd(BlockDriverState *bs, BlockDriverState *backing_hd)
bdrv_op_unblock(bs->backing_hd, BLOCK_OP_TYPE_COMMIT,
bs->backing_blocker);
out:
bdrv_refresh_limits(bs);
bdrv_refresh_limits(bs, NULL);
}
/*
@@ -1778,7 +1791,7 @@ void bdrv_reopen_commit(BDRVReopenState *reopen_state)
BDRV_O_CACHE_WB);
reopen_state->bs->read_only = !(reopen_state->flags & BDRV_O_RDWR);
bdrv_refresh_limits(reopen_state->bs);
bdrv_refresh_limits(reopen_state->bs, NULL);
}
/*
@@ -3010,6 +3023,7 @@ static int coroutine_fn bdrv_aligned_preadv(BlockDriverState *bs,
assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
assert(!qiov || bytes == qiov->size);
/* Handle Copy on Read and associated serialisation */
if (flags & BDRV_REQ_COPY_ON_READ) {
@@ -3054,8 +3068,20 @@ static int coroutine_fn bdrv_aligned_preadv(BlockDriverState *bs,
max_nb_sectors = ROUND_UP(MAX(0, total_sectors - sector_num),
align >> BDRV_SECTOR_BITS);
if (max_nb_sectors > 0) {
ret = drv->bdrv_co_readv(bs, sector_num,
MIN(nb_sectors, max_nb_sectors), qiov);
QEMUIOVector local_qiov;
size_t local_sectors;
max_nb_sectors = MIN(max_nb_sectors, SIZE_MAX / BDRV_SECTOR_BITS);
local_sectors = MIN(max_nb_sectors, nb_sectors);
qemu_iovec_init(&local_qiov, qiov->niov);
qemu_iovec_concat(&local_qiov, qiov, 0,
local_sectors * BDRV_SECTOR_SIZE);
ret = drv->bdrv_co_readv(bs, sector_num, local_sectors,
&local_qiov);
qemu_iovec_destroy(&local_qiov);
} else {
ret = 0;
}
@@ -3267,6 +3293,7 @@ static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs,
assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
assert(!qiov || bytes == qiov->size);
waited = wait_serialising_requests(req);
assert(!waited || !req->serialising);
@@ -4040,7 +4067,7 @@ int coroutine_fn bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num,
if (ret < 0) {
return ret;
}
return (ret & BDRV_BLOCK_ALLOCATED);
return !!(ret & BDRV_BLOCK_ALLOCATED);
}
/*
+1 -1
View File
@@ -307,7 +307,7 @@ static void coroutine_fn backup_run(void *opaque)
BACKUP_SECTORS_PER_CLUSTER - i, &n);
i += n;
if (alloced == 1) {
if (alloced == 1 || n == 0) {
break;
}
}
+4
View File
@@ -449,6 +449,10 @@ static void error_callback_bh(void *opaque)
static void blkdebug_aio_cancel(BlockDriverAIOCB *blockacb)
{
BlkdebugAIOCB *acb = container_of(blockacb, BlkdebugAIOCB, common);
if (acb->bh) {
qemu_bh_delete(acb->bh);
acb->bh = NULL;
}
qemu_aio_release(acb);
}
+3 -3
View File
@@ -1450,7 +1450,7 @@ static void iscsi_close(BlockDriverState *bs)
memset(iscsilun, 0, sizeof(IscsiLun));
}
static int iscsi_refresh_limits(BlockDriverState *bs)
static void iscsi_refresh_limits(BlockDriverState *bs, Error **errp)
{
IscsiLun *iscsilun = bs->opaque;
@@ -1475,7 +1475,6 @@ static int iscsi_refresh_limits(BlockDriverState *bs)
}
bs->bl.opt_transfer_length = sector_lun2qemu(iscsilun->bl.opt_xfer_len,
iscsilun);
return 0;
}
/* Since iscsi_open() ignores bdrv_flags, there is nothing to do here in
@@ -1510,7 +1509,8 @@ static int iscsi_truncate(BlockDriverState *bs, int64_t offset)
if (iscsilun->allocationmap != NULL) {
g_free(iscsilun->allocationmap);
iscsilun->allocationmap =
bitmap_new(DIV_ROUND_UP(bs->total_sectors,
bitmap_new(DIV_ROUND_UP(sector_lun2qemu(iscsilun->num_blocks,
iscsilun),
iscsilun->cluster_sectors));
}
+5
View File
@@ -310,5 +310,10 @@ void laio_cleanup(void *s_)
struct qemu_laio_state *s = s_;
event_notifier_cleanup(&s->e);
if (io_destroy(s->ctx) != 0) {
fprintf(stderr, "%s: destroy AIO context %p failed\n",
__func__, &s->ctx);
}
g_free(s);
}
+27 -9
View File
@@ -210,20 +210,31 @@ static void GCC_FMT_ATTR(3, 4) report_unsupported(BlockDriverState *bs,
static void report_unsupported_feature(BlockDriverState *bs,
Error **errp, Qcow2Feature *table, uint64_t mask)
{
char *features = g_strdup("");
char *old;
while (table && table->name[0] != '\0') {
if (table->type == QCOW2_FEAT_TYPE_INCOMPATIBLE) {
if (mask & (1 << table->bit)) {
report_unsupported(bs, errp, "%.46s", table->name);
mask &= ~(1 << table->bit);
if (mask & (1ULL << table->bit)) {
old = features;
features = g_strdup_printf("%s%s%.46s", old, *old ? ", " : "",
table->name);
g_free(old);
mask &= ~(1ULL << table->bit);
}
}
table++;
}
if (mask) {
report_unsupported(bs, errp, "Unknown incompatible feature: %" PRIx64,
mask);
old = features;
features = g_strdup_printf("%s%sUnknown incompatible feature: %" PRIx64,
old, *old ? ", " : "", mask);
g_free(old);
}
report_unsupported(bs, errp, "%s", features);
g_free(features);
}
/*
@@ -855,13 +866,11 @@ static int qcow2_open(BlockDriverState *bs, QDict *options, int flags,
return ret;
}
static int qcow2_refresh_limits(BlockDriverState *bs)
static void qcow2_refresh_limits(BlockDriverState *bs, Error **errp)
{
BDRVQcowState *s = bs->opaque;
bs->bl.write_zeroes_alignment = s->cluster_sectors;
return 0;
}
static int qcow2_set_key(BlockDriverState *bs, const char *key)
@@ -1020,11 +1029,20 @@ static coroutine_fn int qcow2_co_readv(BlockDriverState *bs, int64_t sector_num,
n1 = qcow2_backing_read1(bs->backing_hd, &hd_qiov,
sector_num, cur_nr_sectors);
if (n1 > 0) {
QEMUIOVector local_qiov;
qemu_iovec_init(&local_qiov, hd_qiov.niov);
qemu_iovec_concat(&local_qiov, &hd_qiov, 0,
n1 * BDRV_SECTOR_SIZE);
BLKDBG_EVENT(bs->file, BLKDBG_READ_BACKING_AIO);
qemu_co_mutex_unlock(&s->lock);
ret = bdrv_co_readv(bs->backing_hd, sector_num,
n1, &hd_qiov);
n1, &local_qiov);
qemu_co_mutex_lock(&s->lock);
qemu_iovec_destroy(&local_qiov);
if (ret < 0) {
goto fail;
}
+31 -11
View File
@@ -528,13 +528,11 @@ out:
return ret;
}
static int bdrv_qed_refresh_limits(BlockDriverState *bs)
static void bdrv_qed_refresh_limits(BlockDriverState *bs, Error **errp)
{
BDRVQEDState *s = bs->opaque;
bs->bl.write_zeroes_alignment = s->header.cluster_size >> BDRV_SECTOR_BITS;
return 0;
}
/* We have nothing to do for QED reopen, stubs just return
@@ -761,17 +759,19 @@ static BDRVQEDState *acb_to_s(QEDAIOCB *acb)
/**
* Read from the backing file or zero-fill if no backing file
*
* @s: QED state
* @pos: Byte position in device
* @qiov: Destination I/O vector
* @cb: Completion function
* @opaque: User data for completion function
* @s: QED state
* @pos: Byte position in device
* @qiov: Destination I/O vector
* @backing_qiov: Possibly shortened copy of qiov, to be allocated here
* @cb: Completion function
* @opaque: User data for completion function
*
* This function reads qiov->size bytes starting at pos from the backing file.
* If there is no backing file then zeroes are read.
*/
static void qed_read_backing_file(BDRVQEDState *s, uint64_t pos,
QEMUIOVector *qiov,
QEMUIOVector **backing_qiov,
BlockDriverCompletionFunc *cb, void *opaque)
{
uint64_t backing_length = 0;
@@ -804,15 +804,21 @@ static void qed_read_backing_file(BDRVQEDState *s, uint64_t pos,
/* If the read straddles the end of the backing file, shorten it */
size = MIN((uint64_t)backing_length - pos, qiov->size);
assert(*backing_qiov == NULL);
*backing_qiov = g_new(QEMUIOVector, 1);
qemu_iovec_init(*backing_qiov, qiov->niov);
qemu_iovec_concat(*backing_qiov, qiov, 0, size);
BLKDBG_EVENT(s->bs->file, BLKDBG_READ_BACKING_AIO);
bdrv_aio_readv(s->bs->backing_hd, pos / BDRV_SECTOR_SIZE,
qiov, size / BDRV_SECTOR_SIZE, cb, opaque);
*backing_qiov, size / BDRV_SECTOR_SIZE, cb, opaque);
}
typedef struct {
GenericCB gencb;
BDRVQEDState *s;
QEMUIOVector qiov;
QEMUIOVector *backing_qiov;
struct iovec iov;
uint64_t offset;
} CopyFromBackingFileCB;
@@ -829,6 +835,12 @@ static void qed_copy_from_backing_file_write(void *opaque, int ret)
CopyFromBackingFileCB *copy_cb = opaque;
BDRVQEDState *s = copy_cb->s;
if (copy_cb->backing_qiov) {
qemu_iovec_destroy(copy_cb->backing_qiov);
g_free(copy_cb->backing_qiov);
copy_cb->backing_qiov = NULL;
}
if (ret) {
qed_copy_from_backing_file_cb(copy_cb, ret);
return;
@@ -866,11 +878,12 @@ static void qed_copy_from_backing_file(BDRVQEDState *s, uint64_t pos,
copy_cb = gencb_alloc(sizeof(*copy_cb), cb, opaque);
copy_cb->s = s;
copy_cb->offset = offset;
copy_cb->backing_qiov = NULL;
copy_cb->iov.iov_base = qemu_blockalign(s->bs, len);
copy_cb->iov.iov_len = len;
qemu_iovec_init_external(&copy_cb->qiov, &copy_cb->iov, 1);
qed_read_backing_file(s, pos, &copy_cb->qiov,
qed_read_backing_file(s, pos, &copy_cb->qiov, &copy_cb->backing_qiov,
qed_copy_from_backing_file_write, copy_cb);
}
@@ -1313,7 +1326,7 @@ static void qed_aio_read_data(void *opaque, int ret,
return;
} else if (ret != QED_CLUSTER_FOUND) {
qed_read_backing_file(s, acb->cur_pos, &acb->cur_qiov,
qed_aio_next_io, acb);
&acb->backing_qiov, qed_aio_next_io, acb);
return;
}
@@ -1339,6 +1352,12 @@ static void qed_aio_next_io(void *opaque, int ret)
trace_qed_aio_next_io(s, acb, ret, acb->cur_pos + acb->cur_qiov.size);
if (acb->backing_qiov) {
qemu_iovec_destroy(acb->backing_qiov);
g_free(acb->backing_qiov);
acb->backing_qiov = NULL;
}
/* Handle I/O error */
if (ret) {
qed_aio_complete(acb, ret);
@@ -1378,6 +1397,7 @@ static BlockDriverAIOCB *qed_aio_setup(BlockDriverState *bs,
acb->qiov_offset = 0;
acb->cur_pos = (uint64_t)sector_num * BDRV_SECTOR_SIZE;
acb->end_pos = acb->cur_pos + nb_sectors * BDRV_SECTOR_SIZE;
acb->backing_qiov = NULL;
acb->request.l2_table = NULL;
qemu_iovec_init(&acb->cur_qiov, qiov->niov);
+1
View File
@@ -142,6 +142,7 @@ typedef struct QEDAIOCB {
/* Current cluster scatter-gather list */
QEMUIOVector cur_qiov;
QEMUIOVector *backing_qiov;
uint64_t cur_pos; /* position on block device, in bytes */
uint64_t cur_cluster; /* cluster offset in image file */
unsigned int cur_nclusters; /* number of clusters being accessed */
+48 -15
View File
@@ -221,7 +221,7 @@ static int raw_normalize_devicepath(const char **filename)
}
#endif
static void raw_probe_alignment(BlockDriverState *bs)
static void raw_probe_alignment(BlockDriverState *bs, int fd, Error **errp)
{
BDRVRawState *s = bs->opaque;
char *buf;
@@ -240,24 +240,24 @@ static void raw_probe_alignment(BlockDriverState *bs)
s->buf_align = 0;
#ifdef BLKSSZGET
if (ioctl(s->fd, BLKSSZGET, &sector_size) >= 0) {
if (ioctl(fd, BLKSSZGET, &sector_size) >= 0) {
bs->request_alignment = sector_size;
}
#endif
#ifdef DKIOCGETBLOCKSIZE
if (ioctl(s->fd, DKIOCGETBLOCKSIZE, &sector_size) >= 0) {
if (ioctl(fd, DKIOCGETBLOCKSIZE, &sector_size) >= 0) {
bs->request_alignment = sector_size;
}
#endif
#ifdef DIOCGSECTORSIZE
if (ioctl(s->fd, DIOCGSECTORSIZE, &sector_size) >= 0) {
if (ioctl(fd, DIOCGSECTORSIZE, &sector_size) >= 0) {
bs->request_alignment = sector_size;
}
#endif
#ifdef CONFIG_XFS
if (s->is_xfs) {
struct dioattr da;
if (xfsctl(NULL, s->fd, XFS_IOC_DIOINFO, &da) >= 0) {
if (xfsctl(NULL, fd, XFS_IOC_DIOINFO, &da) >= 0) {
bs->request_alignment = da.d_miniosz;
/* The kernel returns wrong information for d_mem */
/* s->buf_align = da.d_mem; */
@@ -270,7 +270,7 @@ static void raw_probe_alignment(BlockDriverState *bs)
size_t align;
buf = qemu_memalign(MAX_BLOCKSIZE, 2 * MAX_BLOCKSIZE);
for (align = 512; align <= MAX_BLOCKSIZE; align <<= 1) {
if (pread(s->fd, buf + align, MAX_BLOCKSIZE, 0) >= 0) {
if (pread(fd, buf + align, MAX_BLOCKSIZE, 0) >= 0) {
s->buf_align = align;
break;
}
@@ -282,13 +282,18 @@ static void raw_probe_alignment(BlockDriverState *bs)
size_t align;
buf = qemu_memalign(s->buf_align, MAX_BLOCKSIZE);
for (align = 512; align <= MAX_BLOCKSIZE; align <<= 1) {
if (pread(s->fd, buf, align, 0) >= 0) {
if (pread(fd, buf, align, 0) >= 0) {
bs->request_alignment = align;
break;
}
}
qemu_vfree(buf);
}
if (!s->buf_align || !bs->request_alignment) {
error_setg(errp, "Could not find working O_DIRECT alignment. "
"Try cache.direct=off.");
}
}
static void raw_parse_flags(int bdrv_flags, int *open_flags)
@@ -505,6 +510,7 @@ static int raw_reopen_prepare(BDRVReopenState *state,
BDRVRawState *s;
BDRVRawReopenState *raw_s;
int ret = 0;
Error *local_err = NULL;
assert(state != NULL);
assert(state->bs != NULL);
@@ -577,6 +583,19 @@ static int raw_reopen_prepare(BDRVReopenState *state,
ret = -1;
}
}
/* Fail already reopen_prepare() if we can't get a working O_DIRECT
* alignment with the new fd. */
if (raw_s->fd != -1) {
raw_probe_alignment(state->bs, raw_s->fd, &local_err);
if (local_err) {
qemu_close(raw_s->fd);
raw_s->fd = -1;
error_propagate(errp, local_err);
ret = -EINVAL;
}
}
return ret;
}
@@ -615,14 +634,12 @@ static void raw_reopen_abort(BDRVReopenState *state)
state->opaque = NULL;
}
static int raw_refresh_limits(BlockDriverState *bs)
static void raw_refresh_limits(BlockDriverState *bs, Error **errp)
{
BDRVRawState *s = bs->opaque;
raw_probe_alignment(bs);
raw_probe_alignment(bs, s->fd, errp);
bs->bl.opt_mem_alignment = s->buf_align;
return 0;
}
static ssize_t handle_aiocb_ioctl(RawPosixAIOData *aiocb)
@@ -730,6 +747,15 @@ static ssize_t handle_aiocb_rw_linear(RawPosixAIOData *aiocb, char *buf)
}
if (len == -1 && errno == EINTR) {
continue;
} else if (len == -1 && errno == EINVAL &&
(aiocb->bs->open_flags & BDRV_O_NOCACHE) &&
!(aiocb->aio_type & QEMU_AIO_WRITE) &&
offset > 0) {
/* O_DIRECT pread() may fail with EINVAL when offset is unaligned
* after a short read. Assume that O_DIRECT short reads only occur
* at EOF. Therefore this is a short read, not an I/O error.
*/
break;
} else if (len == -1) {
offset = -errno;
break;
@@ -790,6 +816,7 @@ static ssize_t handle_aiocb_rw(RawPosixAIOData *aiocb)
memcpy(p, aiocb->aio_iov[i].iov_base, aiocb->aio_iov[i].iov_len);
p += aiocb->aio_iov[i].iov_len;
}
assert(p - buf == aiocb->aio_nbytes);
}
nbytes = handle_aiocb_rw_linear(aiocb, buf);
@@ -804,9 +831,11 @@ static ssize_t handle_aiocb_rw(RawPosixAIOData *aiocb)
copy = aiocb->aio_iov[i].iov_len;
}
memcpy(aiocb->aio_iov[i].iov_base, p, copy);
assert(count >= copy);
p += copy;
count -= copy;
}
assert(count == 0);
}
qemu_vfree(buf);
@@ -993,12 +1022,14 @@ static int paio_submit_co(BlockDriverState *bs, int fd,
acb->aio_type = type;
acb->aio_fildes = fd;
acb->aio_nbytes = nb_sectors * BDRV_SECTOR_SIZE;
acb->aio_offset = sector_num * BDRV_SECTOR_SIZE;
if (qiov) {
acb->aio_iov = qiov->iov;
acb->aio_niov = qiov->niov;
assert(qiov->size == acb->aio_nbytes);
}
acb->aio_nbytes = nb_sectors * 512;
acb->aio_offset = sector_num * 512;
trace_paio_submit_co(sector_num, nb_sectors, type);
pool = aio_get_thread_pool(bdrv_get_aio_context(bs));
@@ -1016,12 +1047,14 @@ static BlockDriverAIOCB *paio_submit(BlockDriverState *bs, int fd,
acb->aio_type = type;
acb->aio_fildes = fd;
acb->aio_nbytes = nb_sectors * BDRV_SECTOR_SIZE;
acb->aio_offset = sector_num * BDRV_SECTOR_SIZE;
if (qiov) {
acb->aio_iov = qiov->iov;
acb->aio_niov = qiov->niov;
assert(qiov->size == acb->aio_nbytes);
}
acb->aio_nbytes = nb_sectors * 512;
acb->aio_offset = sector_num * 512;
trace_paio_submit(acb, opaque, sector_num, nb_sectors, type);
pool = aio_get_thread_pool(bdrv_get_aio_context(bs));
+1 -2
View File
@@ -94,10 +94,9 @@ static int raw_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
return bdrv_get_info(bs->file, bdi);
}
static int raw_refresh_limits(BlockDriverState *bs)
static void raw_refresh_limits(BlockDriverState *bs, Error **errp)
{
bs->bl = bs->file->bl;
return 0;
}
static int raw_truncate(BlockDriverState *bs, int64_t offset)
+1 -1
View File
@@ -76,7 +76,7 @@ static void close_unused_images(BlockDriverState *top, BlockDriverState *base,
bdrv_unref(unused);
}
bdrv_refresh_limits(top);
bdrv_refresh_limits(top, NULL);
}
static void coroutine_fn stream_run(void *opaque)
+1 -3
View File
@@ -938,7 +938,7 @@ fail:
}
static int vmdk_refresh_limits(BlockDriverState *bs)
static void vmdk_refresh_limits(BlockDriverState *bs, Error **errp)
{
BDRVVmdkState *s = bs->opaque;
int i;
@@ -950,8 +950,6 @@ static int vmdk_refresh_limits(BlockDriverState *bs)
s->extents[i].cluster_sectors);
}
}
return 0;
}
static int get_whole_cluster(BlockDriverState *bs,
+1 -1
View File
@@ -187,7 +187,7 @@ int block_job_cancel_sync(BlockJob *job)
job->opaque = &data;
block_job_cancel(job);
while (data.ret == -EINPROGRESS) {
qemu_aio_wait();
aio_poll(bdrv_get_aio_context(bs), true);
}
return (data.cancelled && data.ret == 0) ? -ECANCELED : data.ret;
}
Vendored
+9 -1
View File
@@ -1489,8 +1489,9 @@ for flag in $gcc_flags; do
fi
done
if test "$stack_protector" != "no" ; then
if test "$stack_protector" != "no"; then
gcc_flags="-fstack-protector-strong -fstack-protector-all"
sp_on=0
for flag in $gcc_flags; do
# We need to check both a compile and a link, since some compiler
# setups fail only on a .c->.o compile and some only at link time
@@ -1498,9 +1499,15 @@ if test "$stack_protector" != "no" ; then
compile_prog "-Werror $flag" ""; then
QEMU_CFLAGS="$QEMU_CFLAGS $flag"
LIBTOOLFLAGS="$LIBTOOLFLAGS -Wc,$flag"
sp_on=1
break
fi
done
if test "$stack_protector" = yes; then
if test $sp_on = 0; then
error_exit "Stack protector not supported"
fi
fi
fi
# Workaround for http://gcc.gnu.org/PR55489. Happens with -fPIE/-fPIC and
@@ -1716,6 +1723,7 @@ fi
cat > $TMPC <<EOF
#include <sys/socket.h>
#include <linux/ip.h>
int main(void) { return sizeof(struct mmsghdr); }
EOF
if compile_prog "" "" ; then
+4
View File
@@ -170,6 +170,10 @@ static void dma_bdrv_cb(void *opaque, int ret)
return;
}
if (dbs->iov.size & ~BDRV_SECTOR_MASK) {
qemu_iovec_discard_back(&dbs->iov, dbs->iov.size & ~BDRV_SECTOR_MASK);
}
dbs->acb = dbs->io_func(dbs->bs, dbs->sector_num, &dbs->iov,
dbs->iov.size / 512, dma_bdrv_cb, dbs);
assert(dbs->acb);
+104
View File
@@ -0,0 +1,104 @@
/*
* This model describes the interaction between aio_set_dispatching()
* and aio_notify().
*
* Author: Paolo Bonzini <pbonzini@redhat.com>
*
* This file is in the public domain. If you really want a license,
* the WTFPL will do.
*
* To simulate it:
* spin -p docs/aio_notify.promela
*
* To verify it:
* spin -a docs/aio_notify.promela
* gcc -O2 pan.c
* ./a.out -a
*/
#define MAX 4
#define LAST (1 << (MAX - 1))
#define FINAL ((LAST << 1) - 1)
bool dispatching;
bool event;
int req, done;
active proctype waiter()
{
int fetch, blocking;
do
:: done != FINAL -> {
// Computing "blocking" is separate from execution of the
// "bottom half"
blocking = (req == 0);
// This is our "bottom half"
atomic { fetch = req; req = 0; }
done = done | fetch;
// Wait for a nudge from the other side
do
:: event == 1 -> { event = 0; break; }
:: !blocking -> break;
od;
dispatching = 1;
// If you are simulating this model, you may want to add
// something like this here:
//
// int foo; foo++; foo++; foo++;
//
// This only wastes some time and makes it more likely
// that the notifier process hits the "fast path".
dispatching = 0;
}
:: else -> break;
od
}
active proctype notifier()
{
int next = 1;
int sets = 0;
do
:: next <= LAST -> {
// generate a request
req = req | next;
next = next << 1;
// aio_notify
if
:: dispatching == 0 -> sets++; event = 1;
:: else -> skip;
fi;
// Test both synchronous and asynchronous delivery
if
:: 1 -> do
:: req == 0 -> break;
od;
:: 1 -> skip;
fi;
}
:: else -> break;
od;
printf("Skipped %d event_notifier_set\n", MAX - sets);
}
#define p (done == FINAL)
never {
do
:: 1 // after an arbitrarily long prefix
:: p -> break // p becomes true
od;
do
:: !p -> accept: break // it then must remains true forever after
od
}
+74 -6
View File
@@ -243,6 +243,19 @@ Data:
"timestamp": { "seconds": 1368697518, "microseconds": 326866 } }
}
POWERDOWN
---------
Emitted when the Virtual Machine is powered down through the power
control system, such as via ACPI.
Data: None.
Example:
{ "event": "POWERDOWN",
"timestamp": { "seconds": 1267040730, "microseconds": 682951 } }
QUORUM_FAILURE
--------------
@@ -285,7 +298,7 @@ Example:
RESET
-----
Emitted when the Virtual Machine is reseted.
Emitted when the Virtual Machine is reset.
Data: None.
@@ -325,7 +338,8 @@ Example:
SHUTDOWN
--------
Emitted when the Virtual Machine is powered down.
Emitted when the Virtual Machine has shut down, indicating that qemu
is about to exit.
Data: None.
@@ -337,10 +351,10 @@ Example:
Note: If the command-line option "-no-shutdown" has been specified, a STOP
event will eventually follow the SHUTDOWN event.
SPICE_CONNECTED, SPICE_DISCONNECTED
-----------------------------------
SPICE_CONNECTED
---------------
Emitted when a SPICE client connects or disconnects.
Emitted when a SPICE client connects.
Data:
@@ -362,11 +376,36 @@ Example:
"client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"}
}}
SPICE_DISCONNECTED
------------------
Emitted when a SPICE client disconnects.
Data:
- "server": Server information (json-object)
- "host": IP address (json-string)
- "port": port number (json-string)
- "family": address family (json-string, "ipv4" or "ipv6")
- "client": Client information (json-object)
- "host": IP address (json-string)
- "port": port number (json-string)
- "family": address family (json-string, "ipv4" or "ipv6")
Example:
{ "timestamp": {"seconds": 1290688046, "microseconds": 388707},
"event": "SPICE_DISCONNECTED",
"data": {
"server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"},
"client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"}
}}
SPICE_INITIALIZED
-----------------
Emitted after initial handshake and authentication takes place (if any)
and the SPICE channel is up'n'running
and the SPICE channel is up and running
Data:
@@ -399,6 +438,19 @@ Example:
"channel-id": 0, "tls": true}
}}
SPICE_MIGRATE_COMPLETED
-----------------------
Emitted when SPICE migration has completed
Data: None.
Example:
{ "timestamp": {"seconds": 1290688046, "microseconds": 417172},
"event": "SPICE_MIGRATE_COMPLETED" }
STOP
----
@@ -527,6 +579,22 @@ Example:
"host": "127.0.0.1", "sasl_username": "luiz" } },
"timestamp": { "seconds": 1263475302, "microseconds": 150772 } }
VSERPORT_CHANGE
---------------
Emitted when the guest opens or closes a virtio-serial port.
Data:
- "id": device identifier of the virtio-serial port (json-string)
- "open": true if the guest has opened the virtio-serial port (json-bool)
Example:
{ "event": "VSERPORT_CHANGE",
"data": { "id": "channel0", "open": true },
"timestamp": { "seconds": 1401385907, "microseconds": 422329 } }
WAKEUP
------
+39 -16
View File
@@ -430,15 +430,50 @@ static int cpu_common_post_load(void *opaque, int version_id)
return 0;
}
static int cpu_common_pre_load(void *opaque)
{
CPUState *cpu = opaque;
cpu->exception_index = 0;
return 0;
}
static bool cpu_common_exception_index_needed(void *opaque)
{
CPUState *cpu = opaque;
return cpu->exception_index != 0;
}
static const VMStateDescription vmstate_cpu_common_exception_index = {
.name = "cpu_common/exception_index",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_INT32(exception_index, CPUState),
VMSTATE_END_OF_LIST()
}
};
const VMStateDescription vmstate_cpu_common = {
.name = "cpu_common",
.version_id = 1,
.minimum_version_id = 1,
.pre_load = cpu_common_pre_load,
.post_load = cpu_common_post_load,
.fields = (VMStateField[]) {
VMSTATE_UINT32(halted, CPUState),
VMSTATE_UINT32(interrupt_request, CPUState),
VMSTATE_END_OF_LIST()
},
.subsections = (VMStateSubsection[]) {
{
.vmsd = &vmstate_cpu_common_exception_index,
.needed = cpu_common_exception_index_needed,
} , {
/* empty */
}
}
};
@@ -1568,8 +1603,7 @@ static void notdirty_mem_write(void *opaque, hwaddr ram_addr,
default:
abort();
}
cpu_physical_memory_set_dirty_flag(ram_addr, DIRTY_MEMORY_MIGRATION);
cpu_physical_memory_set_dirty_flag(ram_addr, DIRTY_MEMORY_VGA);
cpu_physical_memory_set_dirty_range_nocode(ram_addr, size);
/* we remove the notdirty callback only if the code has been
flushed */
if (!cpu_physical_memory_is_clean(ram_addr)) {
@@ -1978,8 +2012,7 @@ static void invalidate_and_set_dirty(hwaddr addr,
/* invalidate code */
tb_invalidate_phys_page_range(addr, addr + length, 0);
/* set dirty bit */
cpu_physical_memory_set_dirty_flag(addr, DIRTY_MEMORY_VGA);
cpu_physical_memory_set_dirty_flag(addr, DIRTY_MEMORY_MIGRATION);
cpu_physical_memory_set_dirty_range_nocode(addr, length);
}
xen_modified_memory(addr, length);
}
@@ -2335,15 +2368,7 @@ void address_space_unmap(AddressSpace *as, void *buffer, hwaddr len,
mr = qemu_ram_addr_from_host(buffer, &addr1);
assert(mr != NULL);
if (is_write) {
while (access_len) {
unsigned l;
l = TARGET_PAGE_SIZE;
if (l > access_len)
l = access_len;
invalidate_and_set_dirty(addr1, l);
addr1 += l;
access_len -= l;
}
invalidate_and_set_dirty(addr1, access_len);
}
if (xen_enabled()) {
xen_invalidate_map_cache_entry(buffer);
@@ -2581,9 +2606,7 @@ void stl_phys_notdirty(AddressSpace *as, hwaddr addr, uint32_t val)
/* invalidate code */
tb_invalidate_phys_page_range(addr1, addr1 + 4, 0);
/* set dirty bit */
cpu_physical_memory_set_dirty_flag(addr1,
DIRTY_MEMORY_MIGRATION);
cpu_physical_memory_set_dirty_flag(addr1, DIRTY_MEMORY_VGA);
cpu_physical_memory_set_dirty_range_nocode(addr1, 4);
}
}
}
+2 -2
View File
@@ -232,11 +232,11 @@ void ich9_pm_init(PCIDevice *lpc_pci, ICH9LPCPMRegs *pm,
acpi_gpe_init(&pm->acpi_regs, ICH9_PMIO_GPE0_LEN);
memory_region_init_io(&pm->io_gpe, OBJECT(lpc_pci), &ich9_gpe_ops, pm,
"apci-gpe0", ICH9_PMIO_GPE0_LEN);
"acpi-gpe0", ICH9_PMIO_GPE0_LEN);
memory_region_add_subregion(&pm->io, ICH9_PMIO_GPE0_STS, &pm->io_gpe);
memory_region_init_io(&pm->io_smi, OBJECT(lpc_pci), &ich9_smi_ops, pm,
"apci-smi", 8);
"acpi-smi", 8);
memory_region_add_subregion(&pm->io, ICH9_PMIO_SMI_EN, &pm->io_smi);
pm->irq = sci_irq;
+1 -1
View File
@@ -231,7 +231,7 @@ static uint64_t pci_read(void *opaque, hwaddr addr, unsigned int size)
uint32_t val = 0;
int bsel = s->hotplug_select;
if (bsel < 0 || bsel > ACPI_PCIHP_MAX_HOTPLUG_BUS) {
if (bsel < 0 || bsel >= ACPI_PCIHP_MAX_HOTPLUG_BUS) {
return 0;
}
+27 -6
View File
@@ -104,7 +104,7 @@ static const MemMapEntry a15memmap[] = {
[VIRT_GIC_DIST] = { 0x8000000, 0x10000 },
[VIRT_GIC_CPU] = { 0x8010000, 0x10000 },
[VIRT_UART] = { 0x9000000, 0x1000 },
[VIRT_RTC] = { 0x90010000, 0x1000 },
[VIRT_RTC] = { 0x9010000, 0x1000 },
[VIRT_MMIO] = { 0xa000000, 0x200 },
/* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */
/* 0x10000000 .. 0x40000000 reserved for PCI */
@@ -194,20 +194,41 @@ static void fdt_add_psci_node(const VirtBoardInfo *vbi)
/* No PSCI for TCG yet */
if (kvm_enabled()) {
uint32_t cpu_suspend_fn;
uint32_t cpu_off_fn;
uint32_t cpu_on_fn;
uint32_t migrate_fn;
qemu_fdt_add_subnode(fdt, "/psci");
if (armcpu->psci_version == 2) {
const char comp[] = "arm,psci-0.2\0arm,psci";
qemu_fdt_setprop(fdt, "/psci", "compatible", comp, sizeof(comp));
cpu_off_fn = QEMU_PSCI_0_2_FN_CPU_OFF;
if (arm_feature(&armcpu->env, ARM_FEATURE_AARCH64)) {
cpu_suspend_fn = QEMU_PSCI_0_2_FN64_CPU_SUSPEND;
cpu_on_fn = QEMU_PSCI_0_2_FN64_CPU_ON;
migrate_fn = QEMU_PSCI_0_2_FN64_MIGRATE;
} else {
cpu_suspend_fn = QEMU_PSCI_0_2_FN_CPU_SUSPEND;
cpu_on_fn = QEMU_PSCI_0_2_FN_CPU_ON;
migrate_fn = QEMU_PSCI_0_2_FN_MIGRATE;
}
} else {
qemu_fdt_setprop_string(fdt, "/psci", "compatible", "arm,psci");
cpu_suspend_fn = QEMU_PSCI_0_1_FN_CPU_SUSPEND;
cpu_off_fn = QEMU_PSCI_0_1_FN_CPU_OFF;
cpu_on_fn = QEMU_PSCI_0_1_FN_CPU_ON;
migrate_fn = QEMU_PSCI_0_1_FN_MIGRATE;
}
qemu_fdt_setprop_string(fdt, "/psci", "method", "hvc");
qemu_fdt_setprop_cell(fdt, "/psci", "cpu_suspend",
PSCI_FN_CPU_SUSPEND);
qemu_fdt_setprop_cell(fdt, "/psci", "cpu_off", PSCI_FN_CPU_OFF);
qemu_fdt_setprop_cell(fdt, "/psci", "cpu_on", PSCI_FN_CPU_ON);
qemu_fdt_setprop_cell(fdt, "/psci", "migrate", PSCI_FN_MIGRATE);
qemu_fdt_setprop_cell(fdt, "/psci", "cpu_suspend", cpu_suspend_fn);
qemu_fdt_setprop_cell(fdt, "/psci", "cpu_off", cpu_off_fn);
qemu_fdt_setprop_cell(fdt, "/psci", "cpu_on", cpu_on_fn);
qemu_fdt_setprop_cell(fdt, "/psci", "migrate", migrate_fn);
}
}
+37 -20
View File
@@ -34,6 +34,7 @@ struct VirtIOBlockDataPlane {
VirtIODevice *vdev;
Vring vring; /* virtqueue vring */
EventNotifier *guest_notifier; /* irq */
QEMUBH *bh; /* bh for guest notification */
/* Note that these EventNotifiers are assigned by value. This is
* fine as long as you do not call event_notifier_cleanup on them
@@ -61,47 +62,60 @@ static void notify_guest(VirtIOBlockDataPlane *s)
event_notifier_set(s->guest_notifier);
}
static void notify_guest_bh(void *opaque)
{
VirtIOBlockDataPlane *s = opaque;
notify_guest(s);
}
static void complete_request_vring(VirtIOBlockReq *req, unsigned char status)
{
VirtIOBlockDataPlane *s = req->dev->dataplane;
stb_p(&req->in->status, status);
vring_push(&req->dev->dataplane->vring, req->elem,
vring_push(&req->dev->dataplane->vring, &req->elem,
req->qiov.size + sizeof(*req->in));
notify_guest(req->dev->dataplane);
g_slice_free(VirtIOBlockReq, req);
/* Suppress notification to guest by BH and its scheduled
* flag because requests are completed as a batch after io
* plug & unplug is introduced, and the BH can still be
* executed in dataplane aio context even after it is
* stopped, so needn't worry about notification loss with BH.
*/
qemu_bh_schedule(s->bh);
}
static void handle_notify(EventNotifier *e)
{
VirtIOBlockDataPlane *s = container_of(e, VirtIOBlockDataPlane,
host_notifier);
VirtQueueElement *elem;
VirtIOBlockReq *req;
int ret;
MultiReqBuffer mrb = {
.num_writes = 0,
};
VirtIOBlock *vblk = VIRTIO_BLK(s->vdev);
event_notifier_test_and_clear(&s->host_notifier);
bdrv_io_plug(s->blk->conf.bs);
for (;;) {
MultiReqBuffer mrb = {
.num_writes = 0,
};
int ret;
/* Disable guest->host notifies to avoid unnecessary vmexits */
vring_disable_notification(s->vdev, &s->vring);
for (;;) {
ret = vring_pop(s->vdev, &s->vring, &elem);
VirtIOBlockReq *req = virtio_blk_alloc_request(vblk);
ret = vring_pop(s->vdev, &s->vring, &req->elem);
if (ret < 0) {
assert(elem == NULL);
virtio_blk_free_request(req);
break; /* no more requests */
}
trace_virtio_blk_data_plane_process_request(s, elem->out_num,
elem->in_num, elem->index);
trace_virtio_blk_data_plane_process_request(s, req->elem.out_num,
req->elem.in_num,
req->elem.index);
req = g_slice_new(VirtIOBlockReq);
req->dev = VIRTIO_BLK(s->vdev);
req->elem = elem;
virtio_blk_handle_request(req, &mrb);
}
@@ -127,7 +141,6 @@ void virtio_blk_data_plane_create(VirtIODevice *vdev, VirtIOBlkConf *blk,
Error **errp)
{
VirtIOBlockDataPlane *s;
VirtIOBlock *vblk = VIRTIO_BLK(vdev);
Error *local_err = NULL;
BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev)));
VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
@@ -175,13 +188,12 @@ void virtio_blk_data_plane_create(VirtIODevice *vdev, VirtIOBlkConf *blk,
s->iothread = &s->internal_iothread_obj;
}
s->ctx = iothread_get_aio_context(s->iothread);
s->bh = aio_bh_new(s->ctx, notify_guest_bh, s);
error_setg(&s->blocker, "block device is in use by data plane");
bdrv_op_block_all(blk->conf.bs, s->blocker);
*dataplane = s;
s->saved_complete_request = vblk->complete_request;
vblk->complete_request = complete_request_vring;
}
/* Context: QEMU global mutex held */
@@ -195,6 +207,7 @@ void virtio_blk_data_plane_destroy(VirtIOBlockDataPlane *s)
bdrv_op_unblock_all(s->blk->conf.bs, s->blocker);
error_free(s->blocker);
object_unref(OBJECT(s->iothread));
qemu_bh_delete(s->bh);
g_free(s);
}
@@ -203,6 +216,7 @@ void virtio_blk_data_plane_start(VirtIOBlockDataPlane *s)
{
BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(s->vdev)));
VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
VirtIOBlock *vblk = VIRTIO_BLK(s->vdev);
VirtQueue *vq;
if (s->started) {
@@ -236,6 +250,9 @@ void virtio_blk_data_plane_start(VirtIOBlockDataPlane *s)
}
s->host_notifier = *virtio_queue_get_host_notifier(vq);
s->saved_complete_request = vblk->complete_request;
vblk->complete_request = complete_request_vring;
s->starting = false;
s->started = true;
trace_virtio_blk_data_plane_start(s);
+56 -42
View File
@@ -29,18 +29,18 @@
#include "hw/virtio/virtio-bus.h"
#include "hw/virtio/virtio-access.h"
static VirtIOBlockReq *virtio_blk_alloc_request(VirtIOBlock *s)
VirtIOBlockReq *virtio_blk_alloc_request(VirtIOBlock *s)
{
VirtIOBlockReq *req = g_slice_new0(VirtIOBlockReq);
VirtIOBlockReq *req = g_slice_new(VirtIOBlockReq);
req->dev = s;
req->elem = g_slice_new0(VirtQueueElement);
req->qiov.size = 0;
req->next = NULL;
return req;
}
static void virtio_blk_free_request(VirtIOBlockReq *req)
void virtio_blk_free_request(VirtIOBlockReq *req)
{
if (req) {
g_slice_free(VirtQueueElement, req->elem);
g_slice_free(VirtIOBlockReq, req);
}
}
@@ -54,7 +54,7 @@ static void virtio_blk_complete_request(VirtIOBlockReq *req,
trace_virtio_blk_req_complete(req, status);
stb_p(&req->in->status, status);
virtqueue_push(s->vq, req->elem, req->qiov.size + sizeof(*req->in));
virtqueue_push(s->vq, &req->elem, req->qiov.size + sizeof(*req->in));
virtio_notify(vdev, s->vq);
}
@@ -119,7 +119,7 @@ static VirtIOBlockReq *virtio_blk_get_request(VirtIOBlock *s)
{
VirtIOBlockReq *req = virtio_blk_alloc_request(s);
if (!virtqueue_pop(s->vq, req->elem)) {
if (!virtqueue_pop(s->vq, &req->elem)) {
virtio_blk_free_request(req);
return NULL;
}
@@ -252,7 +252,7 @@ static void virtio_blk_handle_scsi(VirtIOBlockReq *req)
{
int status;
status = virtio_blk_handle_scsi_req(req->dev, req->elem);
status = virtio_blk_handle_scsi_req(req->dev, &req->elem);
virtio_blk_req_complete(req, status);
virtio_blk_free_request(req);
}
@@ -288,6 +288,25 @@ static void virtio_blk_handle_flush(VirtIOBlockReq *req, MultiReqBuffer *mrb)
bdrv_aio_flush(req->dev->bs, virtio_blk_flush_complete, req);
}
static bool virtio_blk_sect_range_ok(VirtIOBlock *dev,
uint64_t sector, size_t size)
{
uint64_t nb_sectors = size >> BDRV_SECTOR_BITS;
uint64_t total_sectors;
if (sector & dev->sector_mask) {
return false;
}
if (size % dev->conf->logical_block_size) {
return false;
}
bdrv_get_geometry(dev->bs, &total_sectors);
if (sector > total_sectors || nb_sectors > total_sectors - sector) {
return false;
}
return true;
}
static void virtio_blk_handle_write(VirtIOBlockReq *req, MultiReqBuffer *mrb)
{
BlockRequest *blkreq;
@@ -295,19 +314,16 @@ static void virtio_blk_handle_write(VirtIOBlockReq *req, MultiReqBuffer *mrb)
sector = virtio_ldq_p(VIRTIO_DEVICE(req->dev), &req->out.sector);
bdrv_acct_start(req->dev->bs, &req->acct, req->qiov.size, BDRV_ACCT_WRITE);
trace_virtio_blk_handle_write(req, sector, req->qiov.size / 512);
if (sector & req->dev->sector_mask) {
virtio_blk_rw_complete(req, -EIO);
return;
}
if (req->qiov.size % req->dev->conf->logical_block_size) {
virtio_blk_rw_complete(req, -EIO);
if (!virtio_blk_sect_range_ok(req->dev, sector, req->qiov.size)) {
virtio_blk_req_complete(req, VIRTIO_BLK_S_IOERR);
virtio_blk_free_request(req);
return;
}
bdrv_acct_start(req->dev->bs, &req->acct, req->qiov.size, BDRV_ACCT_WRITE);
if (mrb->num_writes == 32) {
virtio_submit_multiwrite(req->dev->bs, mrb);
}
@@ -329,18 +345,15 @@ static void virtio_blk_handle_read(VirtIOBlockReq *req)
sector = virtio_ldq_p(VIRTIO_DEVICE(req->dev), &req->out.sector);
bdrv_acct_start(req->dev->bs, &req->acct, req->qiov.size, BDRV_ACCT_READ);
trace_virtio_blk_handle_read(req, sector, req->qiov.size / 512);
if (sector & req->dev->sector_mask) {
virtio_blk_rw_complete(req, -EIO);
return;
}
if (req->qiov.size % req->dev->conf->logical_block_size) {
virtio_blk_rw_complete(req, -EIO);
if (!virtio_blk_sect_range_ok(req->dev, sector, req->qiov.size)) {
virtio_blk_req_complete(req, VIRTIO_BLK_S_IOERR);
virtio_blk_free_request(req);
return;
}
bdrv_acct_start(req->dev->bs, &req->acct, req->qiov.size, BDRV_ACCT_READ);
bdrv_aio_readv(req->dev->bs, sector, &req->qiov,
req->qiov.size / BDRV_SECTOR_SIZE,
virtio_blk_rw_complete, req);
@@ -349,12 +362,12 @@ static void virtio_blk_handle_read(VirtIOBlockReq *req)
void virtio_blk_handle_request(VirtIOBlockReq *req, MultiReqBuffer *mrb)
{
uint32_t type;
struct iovec *in_iov = req->elem->in_sg;
struct iovec *iov = req->elem->out_sg;
unsigned in_num = req->elem->in_num;
unsigned out_num = req->elem->out_num;
struct iovec *in_iov = req->elem.in_sg;
struct iovec *iov = req->elem.out_sg;
unsigned in_num = req->elem.in_num;
unsigned out_num = req->elem.out_num;
if (req->elem->out_num < 1 || req->elem->in_num < 1) {
if (req->elem.out_num < 1 || req->elem.in_num < 1) {
error_report("virtio-blk missing headers");
exit(1);
}
@@ -391,19 +404,19 @@ void virtio_blk_handle_request(VirtIOBlockReq *req, MultiReqBuffer *mrb)
* NB: per existing s/n string convention the string is
* terminated by '\0' only when shorter than buffer.
*/
strncpy(req->elem->in_sg[0].iov_base,
strncpy(req->elem.in_sg[0].iov_base,
s->blk.serial ? s->blk.serial : "",
MIN(req->elem->in_sg[0].iov_len, VIRTIO_BLK_ID_BYTES));
MIN(req->elem.in_sg[0].iov_len, VIRTIO_BLK_ID_BYTES));
virtio_blk_req_complete(req, VIRTIO_BLK_S_OK);
virtio_blk_free_request(req);
} else if (type & VIRTIO_BLK_T_OUT) {
qemu_iovec_init_external(&req->qiov, &req->elem->out_sg[1],
req->elem->out_num - 1);
qemu_iovec_init_external(&req->qiov, &req->elem.out_sg[1],
req->elem.out_num - 1);
virtio_blk_handle_write(req, mrb);
} else if (type == VIRTIO_BLK_T_IN || type == VIRTIO_BLK_T_BARRIER) {
/* VIRTIO_BLK_T_IN is 0, so we can't just & it. */
qemu_iovec_init_external(&req->qiov, &req->elem->in_sg[0],
req->elem->in_num - 1);
qemu_iovec_init_external(&req->qiov, &req->elem.in_sg[0],
req->elem.in_num - 1);
virtio_blk_handle_read(req);
} else {
virtio_blk_req_complete(req, VIRTIO_BLK_S_UNSUPP);
@@ -456,8 +469,9 @@ static void virtio_blk_dma_restart_bh(void *opaque)
s->rq = NULL;
while (req) {
VirtIOBlockReq *next = req->next;
virtio_blk_handle_request(req, &mrb);
req = req->next;
req = next;
}
virtio_submit_multiwrite(s->bs, &mrb);
@@ -627,7 +641,7 @@ static void virtio_blk_save_device(VirtIODevice *vdev, QEMUFile *f)
while (req) {
qemu_put_sbyte(f, 1);
qemu_put_buffer(f, (unsigned char *)req->elem,
qemu_put_buffer(f, (unsigned char *)&req->elem,
sizeof(VirtQueueElement));
req = req->next;
}
@@ -652,15 +666,15 @@ static int virtio_blk_load_device(VirtIODevice *vdev, QEMUFile *f,
while (qemu_get_sbyte(f)) {
VirtIOBlockReq *req = virtio_blk_alloc_request(s);
qemu_get_buffer(f, (unsigned char *)req->elem,
qemu_get_buffer(f, (unsigned char *)&req->elem,
sizeof(VirtQueueElement));
req->next = s->rq;
s->rq = req;
virtqueue_map_sg(req->elem->in_sg, req->elem->in_addr,
req->elem->in_num, 1);
virtqueue_map_sg(req->elem->out_sg, req->elem->out_addr,
req->elem->out_num, 0);
virtqueue_map_sg(req->elem.in_sg, req->elem.in_addr,
req->elem.in_num, 1);
virtqueue_map_sg(req->elem.out_sg, req->elem.out_addr,
req->elem.out_num, 0);
}
return 0;
+11 -4
View File
@@ -175,8 +175,10 @@ static void uart_send_breaks(UartState *s)
{
int break_enabled = 1;
qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_SERIAL_SET_BREAK,
&break_enabled);
if (s->chr) {
qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_SERIAL_SET_BREAK,
&break_enabled);
}
}
static void uart_parameters_setup(UartState *s)
@@ -227,7 +229,9 @@ static void uart_parameters_setup(UartState *s)
packet_size += ssp.data_bits + ssp.stop_bits;
s->char_tx_time = (get_ticks_per_sec() / ssp.speed) * packet_size;
qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp);
if (s->chr) {
qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp);
}
}
static int uart_can_receive(void *opaque)
@@ -295,6 +299,7 @@ static gboolean cadence_uart_xmit(GIOChannel *chan, GIOCondition cond,
/* instant drain the fifo when there's no back-end */
if (!s->chr) {
s->tx_count = 0;
return FALSE;
}
if (!s->tx_count) {
@@ -375,7 +380,9 @@ static void uart_read_rx_fifo(UartState *s, uint32_t *c)
*c = s->rx_fifo[rx_rpos];
s->rx_count--;
qemu_chr_accept_input(s->chr);
if (s->chr) {
qemu_chr_accept_input(s->chr);
}
} else {
*c = 0;
}
+1
View File
@@ -148,6 +148,7 @@ static void multi_serial_pci_exit(PCIDevice *dev)
for (i = 0; i < pci->ports; i++) {
s = pci->state + i;
serial_exit_core(s);
memory_region_del_subregion(&pci->iobar, &s->io);
memory_region_destroy(&s->io);
g_free(pci->name[i]);
}
+35 -28
View File
@@ -223,37 +223,42 @@ static gboolean serial_xmit(GIOChannel *chan, GIOCondition cond, void *opaque)
{
SerialState *s = opaque;
if (s->tsr_retry <= 0) {
if (s->fcr & UART_FCR_FE) {
if (fifo8_is_empty(&s->xmit_fifo)) {
do {
if (s->tsr_retry <= 0) {
if (s->fcr & UART_FCR_FE) {
if (fifo8_is_empty(&s->xmit_fifo)) {
return FALSE;
}
s->tsr = fifo8_pop(&s->xmit_fifo);
if (!s->xmit_fifo.num) {
s->lsr |= UART_LSR_THRE;
}
} else if ((s->lsr & UART_LSR_THRE)) {
return FALSE;
} else {
s->tsr = s->thr;
s->lsr |= UART_LSR_THRE;
s->lsr &= ~UART_LSR_TEMT;
}
}
if (s->mcr & UART_MCR_LOOP) {
/* in loopback mode, say that we just received a char */
serial_receive1(s, &s->tsr, 1);
} else if (qemu_chr_fe_write(s->chr, &s->tsr, 1) != 1) {
if (s->tsr_retry >= 0 && s->tsr_retry < MAX_XMIT_RETRY &&
qemu_chr_fe_add_watch(s->chr, G_IO_OUT|G_IO_HUP,
serial_xmit, s) > 0) {
s->tsr_retry++;
return FALSE;
}
s->tsr = fifo8_pop(&s->xmit_fifo);
if (!s->xmit_fifo.num) {
s->lsr |= UART_LSR_THRE;
}
} else if ((s->lsr & UART_LSR_THRE)) {
return FALSE;
s->tsr_retry = 0;
} else {
s->tsr = s->thr;
s->lsr |= UART_LSR_THRE;
s->lsr &= ~UART_LSR_TEMT;
s->tsr_retry = 0;
}
}
if (s->mcr & UART_MCR_LOOP) {
/* in loopback mode, say that we just received a char */
serial_receive1(s, &s->tsr, 1);
} else if (qemu_chr_fe_write(s->chr, &s->tsr, 1) != 1) {
if (s->tsr_retry >= 0 && s->tsr_retry < MAX_XMIT_RETRY &&
qemu_chr_fe_add_watch(s->chr, G_IO_OUT|G_IO_HUP, serial_xmit, s) > 0) {
s->tsr_retry++;
return FALSE;
}
s->tsr_retry = 0;
} else {
s->tsr_retry = 0;
}
/* Transmit another byte if it is already available. It is only
possible when FIFO is enabled and not empty. */
} while ((s->fcr & UART_FCR_FE) && !fifo8_is_empty(&s->xmit_fifo));
s->last_xmit_ts = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
@@ -293,7 +298,9 @@ static void serial_ioport_write(void *opaque, hwaddr addr, uint64_t val,
s->thr_ipending = 0;
s->lsr &= ~UART_LSR_THRE;
serial_update_irq(s);
serial_xmit(NULL, G_IO_OUT, s);
if (s->tsr_retry <= 0) {
serial_xmit(NULL, G_IO_OUT, s);
}
}
break;
case 1:
+11 -3
View File
@@ -797,10 +797,18 @@ static void add_port(VirtIOSerial *vser, uint32_t port_id)
static void remove_port(VirtIOSerial *vser, uint32_t port_id)
{
VirtIOSerialPort *port;
unsigned int i;
i = port_id / 32;
vser->ports_map[i] &= ~(1U << (port_id % 32));
/*
* Don't mark port 0 removed -- we explicitly reserve it for
* backward compat with older guests, ensure a virtconsole device
* unplug retains the reservation.
*/
if (port_id) {
unsigned int i;
i = port_id / 32;
vser->ports_map[i] &= ~(1U << (port_id % 32));
}
port = find_port_by_id(vser, port_id);
/*
+12 -4
View File
@@ -24,6 +24,7 @@ static void machine_set_accel(Object *obj, const char *value, Error **errp)
{
MachineState *ms = MACHINE(obj);
g_free(ms->accel);
ms->accel = g_strdup(value);
}
@@ -79,6 +80,7 @@ static void machine_set_kernel(Object *obj, const char *value, Error **errp)
{
MachineState *ms = MACHINE(obj);
g_free(ms->kernel_filename);
ms->kernel_filename = g_strdup(value);
}
@@ -93,6 +95,7 @@ static void machine_set_initrd(Object *obj, const char *value, Error **errp)
{
MachineState *ms = MACHINE(obj);
g_free(ms->initrd_filename);
ms->initrd_filename = g_strdup(value);
}
@@ -107,6 +110,7 @@ static void machine_set_append(Object *obj, const char *value, Error **errp)
{
MachineState *ms = MACHINE(obj);
g_free(ms->kernel_cmdline);
ms->kernel_cmdline = g_strdup(value);
}
@@ -121,6 +125,7 @@ static void machine_set_dtb(Object *obj, const char *value, Error **errp)
{
MachineState *ms = MACHINE(obj);
g_free(ms->dtb);
ms->dtb = g_strdup(value);
}
@@ -135,6 +140,7 @@ static void machine_set_dumpdtb(Object *obj, const char *value, Error **errp)
{
MachineState *ms = MACHINE(obj);
g_free(ms->dumpdtb);
ms->dumpdtb = g_strdup(value);
}
@@ -176,6 +182,7 @@ static void machine_set_dt_compatible(Object *obj, const char *value, Error **er
{
MachineState *ms = MACHINE(obj);
g_free(ms->dt_compatible);
ms->dt_compatible = g_strdup(value);
}
@@ -232,6 +239,7 @@ static void machine_set_firmware(Object *obj, const char *value, Error **errp)
{
MachineState *ms = MACHINE(obj);
g_free(ms->firmware);
ms->firmware = g_strdup(value);
}
@@ -239,11 +247,11 @@ static void machine_initfn(Object *obj)
{
object_property_add_str(obj, "accel",
machine_get_accel, machine_set_accel, NULL);
object_property_add_bool(obj, "kernel_irqchip",
object_property_add_bool(obj, "kernel-irqchip",
machine_get_kernel_irqchip,
machine_set_kernel_irqchip,
NULL);
object_property_add(obj, "kvm_shadow_mem", "int",
object_property_add(obj, "kvm-shadow-mem", "int",
machine_get_kvm_shadow_mem,
machine_set_kvm_shadow_mem,
NULL, NULL, NULL);
@@ -257,11 +265,11 @@ static void machine_initfn(Object *obj)
machine_get_dtb, machine_set_dtb, NULL);
object_property_add_str(obj, "dumpdtb",
machine_get_dumpdtb, machine_set_dumpdtb, NULL);
object_property_add(obj, "phandle_start", "int",
object_property_add(obj, "phandle-start", "int",
machine_get_phandle_start,
machine_set_phandle_start,
NULL, NULL, NULL);
object_property_add_str(obj, "dt_compatible",
object_property_add_str(obj, "dt-compatible",
machine_get_dt_compatible,
machine_set_dt_compatible,
NULL);
+20 -4
View File
@@ -2059,7 +2059,7 @@ static void cirrus_vga_mem_write(void *opaque,
}
} else {
#ifdef DEBUG_CIRRUS
printf("cirrus: mem_writeb " TARGET_FMT_plx " value %02x\n", addr,
printf("cirrus: mem_writeb " TARGET_FMT_plx " value 0x%02" PRIu64 "\n", addr,
mem_value);
#endif
}
@@ -2594,7 +2594,7 @@ static void cirrus_vga_ioport_write(void *opaque, hwaddr addr, uint64_t val,
break;
case 0x3c5:
#ifdef DEBUG_VGA_REG
printf("vga: write SR%x = 0x%02x\n", s->sr_index, val);
printf("vga: write SR%x = 0x%02" PRIu64 "\n", s->sr_index, val);
#endif
cirrus_vga_write_sr(c, val);
break;
@@ -2619,7 +2619,7 @@ static void cirrus_vga_ioport_write(void *opaque, hwaddr addr, uint64_t val,
break;
case 0x3cf:
#ifdef DEBUG_VGA_REG
printf("vga: write GR%x = 0x%02x\n", s->gr_index, val);
printf("vga: write GR%x = 0x%02" PRIu64 "\n", s->gr_index, val);
#endif
cirrus_vga_write_gr(c, s->gr_index, val);
break;
@@ -2630,7 +2630,7 @@ static void cirrus_vga_ioport_write(void *opaque, hwaddr addr, uint64_t val,
case 0x3b5:
case 0x3d5:
#ifdef DEBUG_VGA_REG
printf("vga: write CR%x = 0x%02x\n", s->cr_index, val);
printf("vga: write CR%x = 0x%02"PRIu64"\n", s->cr_index, val);
#endif
cirrus_vga_write_cr(c, val);
break;
@@ -2911,6 +2911,14 @@ static void isa_cirrus_vga_realizefn(DeviceState *dev, Error **errp)
ISACirrusVGAState *d = ISA_CIRRUS_VGA(dev);
VGACommonState *s = &d->cirrus_vga.vga;
/* follow real hardware, cirrus card emulated has 4 MB video memory.
Also accept 8 MB/16 MB for backward compatibility. */
if (s->vram_size_mb != 4 && s->vram_size_mb != 8 &&
s->vram_size_mb != 16) {
error_setg(errp, "Invalid cirrus_vga ram size '%u'",
s->vram_size_mb);
return;
}
vga_common_init(s, OBJECT(dev), true);
cirrus_init_common(&d->cirrus_vga, OBJECT(dev), CIRRUS_ID_CLGD5430, 0,
isa_address_space(isadev),
@@ -2957,6 +2965,14 @@ static int pci_cirrus_vga_initfn(PCIDevice *dev)
PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(dev);
int16_t device_id = pc->device_id;
/* follow real hardware, cirrus card emulated has 4 MB video memory.
Also accept 8 MB/16 MB for backward compatibility. */
if (s->vga.vram_size_mb != 4 && s->vga.vram_size_mb != 8 &&
s->vga.vram_size_mb != 16) {
error_report("Invalid cirrus_vga ram size '%u'",
s->vga.vram_size_mb);
return -1;
}
/* setup VGA */
vga_common_init(&s->vga, OBJECT(dev), true);
cirrus_init_common(s, OBJECT(dev), device_id, 1, pci_address_space(dev),
+1 -2
View File
@@ -52,8 +52,7 @@ glue(cirrus_bitblt_rop_fwd_, ROP_NAME)(CirrusVGAState *s,
dstpitch -= bltwidth;
srcpitch -= bltwidth;
if (dstpitch < 0 || srcpitch < 0) {
/* is 0 valid? srcpitch == 0 could be useful */
if (bltheight > 1 && (dstpitch < 0 || srcpitch < 0)) {
return;
}
+3 -1
View File
@@ -138,7 +138,9 @@ static void qxl_render_update_area_unlocked(PCIQXLDevice *qxl)
if (qemu_spice_rect_is_empty(qxl->dirty+i)) {
break;
}
if (qxl->dirty[i].left > qxl->dirty[i].right ||
if (qxl->dirty[i].left < 0 ||
qxl->dirty[i].top < 0 ||
qxl->dirty[i].left > qxl->dirty[i].right ||
qxl->dirty[i].top > qxl->dirty[i].bottom ||
qxl->dirty[i].right > qxl->guest_primary.surface.width ||
qxl->dirty[i].bottom > qxl->guest_primary.surface.height) {
+1
View File
@@ -2063,6 +2063,7 @@ static int qxl_init_primary(PCIDevice *dev)
qxl->id = 0;
qxl_init_ramsize(qxl);
vga->vbe_size = qxl->vgamem_size;
vga->vram_size_mb = qxl->vga.vram_size >> 20;
vga_common_init(vga, OBJECT(dev), true);
vga_init(vga, OBJECT(dev),
+99 -60
View File
@@ -580,6 +580,93 @@ void vga_ioport_write(void *opaque, uint32_t addr, uint32_t val)
}
}
/*
* Sanity check vbe register writes.
*
* As we don't have a way to signal errors to the guest in the bochs
* dispi interface we'll go adjust the registers to the closest valid
* value.
*/
static void vbe_fixup_regs(VGACommonState *s)
{
uint16_t *r = s->vbe_regs;
uint32_t bits, linelength, maxy, offset;
if (!(r[VBE_DISPI_INDEX_ENABLE] & VBE_DISPI_ENABLED)) {
/* vbe is turned off -- nothing to do */
return;
}
/* check depth */
switch (r[VBE_DISPI_INDEX_BPP]) {
case 4:
case 8:
case 16:
case 24:
case 32:
bits = r[VBE_DISPI_INDEX_BPP];
break;
case 15:
bits = 16;
break;
default:
bits = r[VBE_DISPI_INDEX_BPP] = 8;
break;
}
/* check width */
r[VBE_DISPI_INDEX_XRES] &= ~7u;
if (r[VBE_DISPI_INDEX_XRES] == 0) {
r[VBE_DISPI_INDEX_XRES] = 8;
}
if (r[VBE_DISPI_INDEX_XRES] > VBE_DISPI_MAX_XRES) {
r[VBE_DISPI_INDEX_XRES] = VBE_DISPI_MAX_XRES;
}
r[VBE_DISPI_INDEX_VIRT_WIDTH] &= ~7u;
if (r[VBE_DISPI_INDEX_VIRT_WIDTH] > VBE_DISPI_MAX_XRES) {
r[VBE_DISPI_INDEX_VIRT_WIDTH] = VBE_DISPI_MAX_XRES;
}
if (r[VBE_DISPI_INDEX_VIRT_WIDTH] < r[VBE_DISPI_INDEX_XRES]) {
r[VBE_DISPI_INDEX_VIRT_WIDTH] = r[VBE_DISPI_INDEX_XRES];
}
/* check height */
linelength = r[VBE_DISPI_INDEX_VIRT_WIDTH] * bits / 8;
maxy = s->vbe_size / linelength;
if (r[VBE_DISPI_INDEX_YRES] == 0) {
r[VBE_DISPI_INDEX_YRES] = 1;
}
if (r[VBE_DISPI_INDEX_YRES] > VBE_DISPI_MAX_YRES) {
r[VBE_DISPI_INDEX_YRES] = VBE_DISPI_MAX_YRES;
}
if (r[VBE_DISPI_INDEX_YRES] > maxy) {
r[VBE_DISPI_INDEX_YRES] = maxy;
}
/* check offset */
if (r[VBE_DISPI_INDEX_X_OFFSET] > VBE_DISPI_MAX_XRES) {
r[VBE_DISPI_INDEX_X_OFFSET] = VBE_DISPI_MAX_XRES;
}
if (r[VBE_DISPI_INDEX_Y_OFFSET] > VBE_DISPI_MAX_YRES) {
r[VBE_DISPI_INDEX_Y_OFFSET] = VBE_DISPI_MAX_YRES;
}
offset = r[VBE_DISPI_INDEX_X_OFFSET] * bits / 8;
offset += r[VBE_DISPI_INDEX_Y_OFFSET] * linelength;
if (offset + r[VBE_DISPI_INDEX_YRES] * linelength > s->vbe_size) {
r[VBE_DISPI_INDEX_Y_OFFSET] = 0;
offset = r[VBE_DISPI_INDEX_X_OFFSET] * bits / 8;
if (offset + r[VBE_DISPI_INDEX_YRES] * linelength > s->vbe_size) {
r[VBE_DISPI_INDEX_X_OFFSET] = 0;
offset = 0;
}
}
/* update vga state */
r[VBE_DISPI_INDEX_VIRT_HEIGHT] = maxy;
s->vbe_line_offset = linelength;
s->vbe_start_addr = offset / 4;
}
static uint32_t vbe_ioport_read_index(void *opaque, uint32_t addr)
{
VGACommonState *s = opaque;
@@ -614,7 +701,7 @@ uint32_t vbe_ioport_read_data(void *opaque, uint32_t addr)
val = s->vbe_regs[s->vbe_index];
}
} else if (s->vbe_index == VBE_DISPI_INDEX_VIDEO_MEMORY_64K) {
val = s->vram_size / (64 * 1024);
val = s->vbe_size / (64 * 1024);
} else {
val = 0;
}
@@ -649,22 +736,13 @@ void vbe_ioport_write_data(void *opaque, uint32_t addr, uint32_t val)
}
break;
case VBE_DISPI_INDEX_XRES:
if ((val <= VBE_DISPI_MAX_XRES) && ((val & 7) == 0)) {
s->vbe_regs[s->vbe_index] = val;
}
break;
case VBE_DISPI_INDEX_YRES:
if (val <= VBE_DISPI_MAX_YRES) {
s->vbe_regs[s->vbe_index] = val;
}
break;
case VBE_DISPI_INDEX_BPP:
if (val == 0)
val = 8;
if (val == 4 || val == 8 || val == 15 ||
val == 16 || val == 24 || val == 32) {
s->vbe_regs[s->vbe_index] = val;
}
case VBE_DISPI_INDEX_VIRT_WIDTH:
case VBE_DISPI_INDEX_X_OFFSET:
case VBE_DISPI_INDEX_Y_OFFSET:
s->vbe_regs[s->vbe_index] = val;
vbe_fixup_regs(s);
break;
case VBE_DISPI_INDEX_BANK:
if (s->vbe_regs[VBE_DISPI_INDEX_BPP] == 4) {
@@ -681,19 +759,11 @@ void vbe_ioport_write_data(void *opaque, uint32_t addr, uint32_t val)
!(s->vbe_regs[VBE_DISPI_INDEX_ENABLE] & VBE_DISPI_ENABLED)) {
int h, shift_control;
s->vbe_regs[VBE_DISPI_INDEX_VIRT_WIDTH] =
s->vbe_regs[VBE_DISPI_INDEX_XRES];
s->vbe_regs[VBE_DISPI_INDEX_VIRT_HEIGHT] =
s->vbe_regs[VBE_DISPI_INDEX_YRES];
s->vbe_regs[VBE_DISPI_INDEX_VIRT_WIDTH] = 0;
s->vbe_regs[VBE_DISPI_INDEX_X_OFFSET] = 0;
s->vbe_regs[VBE_DISPI_INDEX_Y_OFFSET] = 0;
if (s->vbe_regs[VBE_DISPI_INDEX_BPP] == 4)
s->vbe_line_offset = s->vbe_regs[VBE_DISPI_INDEX_XRES] >> 1;
else
s->vbe_line_offset = s->vbe_regs[VBE_DISPI_INDEX_XRES] *
((s->vbe_regs[VBE_DISPI_INDEX_BPP] + 7) >> 3);
s->vbe_start_addr = 0;
s->vbe_regs[VBE_DISPI_INDEX_ENABLE] |= VBE_DISPI_ENABLED;
vbe_fixup_regs(s);
/* clear the screen (should be done in BIOS) */
if (!(val & VBE_DISPI_NOCLEARMEM)) {
@@ -742,40 +812,6 @@ void vbe_ioport_write_data(void *opaque, uint32_t addr, uint32_t val)
s->vbe_regs[s->vbe_index] = val;
vga_update_memory_access(s);
break;
case VBE_DISPI_INDEX_VIRT_WIDTH:
{
int w, h, line_offset;
if (val < s->vbe_regs[VBE_DISPI_INDEX_XRES])
return;
w = val;
if (s->vbe_regs[VBE_DISPI_INDEX_BPP] == 4)
line_offset = w >> 1;
else
line_offset = w * ((s->vbe_regs[VBE_DISPI_INDEX_BPP] + 7) >> 3);
h = s->vram_size / line_offset;
/* XXX: support weird bochs semantics ? */
if (h < s->vbe_regs[VBE_DISPI_INDEX_YRES])
return;
s->vbe_regs[VBE_DISPI_INDEX_VIRT_WIDTH] = w;
s->vbe_regs[VBE_DISPI_INDEX_VIRT_HEIGHT] = h;
s->vbe_line_offset = line_offset;
}
break;
case VBE_DISPI_INDEX_X_OFFSET:
case VBE_DISPI_INDEX_Y_OFFSET:
{
int x;
s->vbe_regs[s->vbe_index] = val;
s->vbe_start_addr = s->vbe_line_offset * s->vbe_regs[VBE_DISPI_INDEX_Y_OFFSET];
x = s->vbe_regs[VBE_DISPI_INDEX_X_OFFSET];
if (s->vbe_regs[VBE_DISPI_INDEX_BPP] == 4)
s->vbe_start_addr += x >> 1;
else
s->vbe_start_addr += x * ((s->vbe_regs[VBE_DISPI_INDEX_BPP] + 7) >> 3);
s->vbe_start_addr >>= 2;
}
break;
default:
break;
}
@@ -2289,6 +2325,9 @@ void vga_common_init(VGACommonState *s, Object *obj, bool global_vmstate)
s->vram_size <<= 1;
}
s->vram_size_mb = s->vram_size >> 20;
if (!s->vbe_size) {
s->vbe_size = s->vram_size;
}
s->is_vbe_vmstate = 1;
memory_region_init_ram(&s->vram, obj, "vga.vram", s->vram_size);
+1
View File
@@ -93,6 +93,7 @@ typedef struct VGACommonState {
MemoryRegion vram_vbe;
uint32_t vram_size;
uint32_t vram_size_mb; /* property */
uint32_t vbe_size;
uint32_t latch;
MemoryRegion *chain4_alias;
uint8_t sr_index;
+97 -10
View File
@@ -25,7 +25,9 @@
#include <glib.h>
#include "qemu-common.h"
#include "qemu/bitmap.h"
#include "qemu/osdep.h"
#include "qemu/range.h"
#include "qemu/error-report.h"
#include "hw/pci/pci.h"
#include "qom/cpu.h"
#include "hw/i386/pc.h"
@@ -52,6 +54,16 @@
#include "qapi/qmp/qint.h"
#include "qom/qom-qobject.h"
/* These are used to size the ACPI tables for -M pc-i440fx-1.7 and
* -M pc-i440fx-2.0. Even if the actual amount of AML generated grows
* a little bit, there should be plenty of free space since the DSDT
* shrunk by ~1.5k between QEMU 2.0 and QEMU 2.1.
*/
#define ACPI_BUILD_LEGACY_CPU_AML_SIZE 97
#define ACPI_BUILD_ALIGN_SIZE 0x1000
#define ACPI_BUILD_TABLE_SIZE 0x20000
typedef struct AcpiCpuInfo {
DECLARE_BITMAP(found_cpus, ACPI_CPU_HOTPLUG_ID_LIMIT);
} AcpiCpuInfo;
@@ -64,6 +76,7 @@ typedef struct AcpiMcfgInfo {
typedef struct AcpiPmInfo {
bool s3_disabled;
bool s4_disabled;
bool pcihp_bridge_en;
uint8_t s4_val;
uint16_t sci_int;
uint8_t acpi_enable_cmd;
@@ -85,6 +98,7 @@ typedef struct AcpiBuildPciBusHotplugState {
GArray *device_table;
GArray *notify_table;
struct AcpiBuildPciBusHotplugState *parent;
bool pcihp_bridge_en;
} AcpiBuildPciBusHotplugState;
static void acpi_get_dsdt(AcpiMiscInfo *info)
@@ -188,6 +202,9 @@ static void acpi_get_pm_info(AcpiPmInfo *pm)
NULL);
pm->gpe0_blk_len = object_property_get_int(obj, ACPI_PM_PROP_GPE0_BLK_LEN,
NULL);
pm->pcihp_bridge_en =
object_property_get_bool(obj, "acpi-pci-hotplug-with-bridge-support",
NULL);
}
static void acpi_get_misc_info(AcpiMiscInfo *info)
@@ -529,6 +546,12 @@ static void fadt_setup(AcpiFadtDescriptorRev1 *fadt, AcpiPmInfo *pm)
(1 << ACPI_FADT_F_SLP_BUTTON) |
(1 << ACPI_FADT_F_RTC_S4));
fadt->flags |= cpu_to_le32(1 << ACPI_FADT_F_USE_PLATFORM_CLOCK);
/* APIC destination mode ("Flat Logical") has an upper limit of 8 CPUs
* For more than 8 CPUs, "Clustered Logical" mode has to be used
*/
if (max_cpus > 8) {
fadt->flags |= cpu_to_le32(1 << ACPI_FADT_F_FORCE_APIC_CLUSTER_MODEL);
}
}
@@ -768,11 +791,13 @@ static void acpi_set_pci_info(void)
}
static void build_pci_bus_state_init(AcpiBuildPciBusHotplugState *state,
AcpiBuildPciBusHotplugState *parent)
AcpiBuildPciBusHotplugState *parent,
bool pcihp_bridge_en)
{
state->parent = parent;
state->device_table = build_alloc_array();
state->notify_table = build_alloc_array();
state->pcihp_bridge_en = pcihp_bridge_en;
}
static void build_pci_bus_state_cleanup(AcpiBuildPciBusHotplugState *state)
@@ -786,7 +811,7 @@ static void *build_pci_bus_begin(PCIBus *bus, void *parent_state)
AcpiBuildPciBusHotplugState *parent = parent_state;
AcpiBuildPciBusHotplugState *child = g_malloc(sizeof *child);
build_pci_bus_state_init(child, parent);
build_pci_bus_state_init(child, parent, parent->pcihp_bridge_en);
return child;
}
@@ -807,6 +832,14 @@ static void build_pci_bus_end(PCIBus *bus, void *bus_state)
GArray *method;
bool bus_hotplug_support = false;
/*
* Skip bridge subtree creation if bridge hotplug is disabled
* to make acpi tables compatible with legacy machine types.
*/
if (!child->pcihp_bridge_en && bus->parent_dev) {
return;
}
if (bus->parent_dev) {
op = 0x82; /* DeviceOp */
build_append_nameseg(bus_table, "S%.02X_",
@@ -844,6 +877,7 @@ static void build_pci_bus_end(PCIBus *bus, void *bus_state)
PCIDeviceClass *pc;
PCIDevice *pdev = bus->devices[i];
int slot = PCI_SLOT(i);
bool bridge_in_acpi;
if (!pdev) {
continue;
@@ -853,7 +887,13 @@ static void build_pci_bus_end(PCIBus *bus, void *bus_state)
pc = PCI_DEVICE_GET_CLASS(pdev);
dc = DEVICE_GET_CLASS(pdev);
if (pc->class_id == PCI_CLASS_BRIDGE_ISA || pc->is_bridge) {
/* When hotplug for bridges is enabled, bridges are
* described in ACPI separately (see build_pci_bus_end).
* In this case they aren't themselves hot-pluggable.
*/
bridge_in_acpi = pc->is_bridge && child->pcihp_bridge_en;
if (pc->class_id == PCI_CLASS_BRIDGE_ISA || bridge_in_acpi) {
set_bit(slot, slot_device_system);
}
@@ -865,7 +905,7 @@ static void build_pci_bus_end(PCIBus *bus, void *bus_state)
}
}
if (!dc->hotpluggable || pc->is_bridge) {
if (!dc->hotpluggable || bridge_in_acpi) {
clear_bit(slot, slot_hotplug_enable);
}
}
@@ -1130,7 +1170,7 @@ build_ssdt(GArray *table_data, GArray *linker,
bus = PCI_HOST_BRIDGE(pci_host)->bus;
}
build_pci_bus_state_init(&hotplug_state, NULL);
build_pci_bus_state_init(&hotplug_state, NULL, pm->pcihp_bridge_en);
if (bus) {
/* Scan all PCI buses. Generate tables to support hotplug. */
@@ -1359,7 +1399,7 @@ build_rsdp(GArray *rsdp_table, GArray *linker, unsigned rsdt)
{
AcpiRsdpDescriptor *rsdp = acpi_data_push(rsdp_table, sizeof *rsdp);
bios_linker_loader_alloc(linker, ACPI_BUILD_RSDP_FILE, 1,
bios_linker_loader_alloc(linker, ACPI_BUILD_RSDP_FILE, 16,
true /* fseg memory */);
memcpy(&rsdp->signature, "RSD PTR ", 8);
@@ -1440,13 +1480,14 @@ static
void acpi_build(PcGuestInfo *guest_info, AcpiBuildTables *tables)
{
GArray *table_offsets;
unsigned facs, dsdt, rsdt;
unsigned facs, ssdt, dsdt, rsdt;
AcpiCpuInfo cpu;
AcpiPmInfo pm;
AcpiMiscInfo misc;
AcpiMcfgInfo mcfg;
PcPciInfo pci;
uint8_t *u;
size_t aml_len = 0;
acpi_get_cpu_info(&cpu);
acpi_get_pm_info(&pm);
@@ -1474,13 +1515,20 @@ void acpi_build(PcGuestInfo *guest_info, AcpiBuildTables *tables)
dsdt = tables->table_data->len;
build_dsdt(tables->table_data, tables->linker, &misc);
/* Count the size of the DSDT and SSDT, we will need it for legacy
* sizing of ACPI tables.
*/
aml_len += tables->table_data->len - dsdt;
/* ACPI tables pointed to by RSDT */
acpi_add_table(table_offsets, tables->table_data);
build_fadt(tables->table_data, tables->linker, &pm, facs, dsdt);
ssdt = tables->table_data->len;
acpi_add_table(table_offsets, tables->table_data);
build_ssdt(tables->table_data, tables->linker, &cpu, &pm, &misc, &pci,
guest_info);
aml_len += tables->table_data->len - ssdt;
acpi_add_table(table_offsets, tables->table_data);
build_madt(tables->table_data, tables->linker, &cpu, guest_info);
@@ -1513,14 +1561,53 @@ void acpi_build(PcGuestInfo *guest_info, AcpiBuildTables *tables)
/* RSDP is in FSEG memory, so allocate it separately */
build_rsdp(tables->rsdp, tables->linker, rsdt);
/* We'll expose it all to Guest so align size to reduce
/* We'll expose it all to Guest so we want to reduce
* chance of size changes.
* RSDP is small so it's easy to keep it immutable, no need to
* bother with alignment.
*
* We used to align the tables to 4k, but of course this would
* too simple to be enough. 4k turned out to be too small an
* alignment very soon, and in fact it is almost impossible to
* keep the table size stable for all (max_cpus, max_memory_slots)
* combinations. So the table size is always 64k for pc-i440fx-2.1
* and we give an error if the table grows beyond that limit.
*
* We still have the problem of migrating from "-M pc-i440fx-2.0". For
* that, we exploit the fact that QEMU 2.1 generates _smaller_ tables
* than 2.0 and we can always pad the smaller tables with zeros. We can
* then use the exact size of the 2.0 tables.
*
* All this is for PIIX4, since QEMU 2.0 didn't support Q35 migration.
*/
acpi_align_size(tables->table_data, 0x1000);
if (guest_info->legacy_acpi_table_size) {
/* Subtracting aml_len gives the size of fixed tables. Then add the
* size of the PIIX4 DSDT/SSDT in QEMU 2.0.
*/
int legacy_aml_len =
guest_info->legacy_acpi_table_size +
ACPI_BUILD_LEGACY_CPU_AML_SIZE * max_cpus;
int legacy_table_size =
ROUND_UP(tables->table_data->len - aml_len + legacy_aml_len,
ACPI_BUILD_ALIGN_SIZE);
if (tables->table_data->len > legacy_table_size) {
/* Should happen only with PCI bridges and -M pc-i440fx-2.0. */
error_report("Warning: migration may not work.");
}
g_array_set_size(tables->table_data, legacy_table_size);
} else {
/* Make sure we have a buffer in case we need to resize the tables. */
if (tables->table_data->len > ACPI_BUILD_TABLE_SIZE / 2) {
/* As of QEMU 2.1, this fires with 160 VCPUs and 255 memory slots. */
error_report("Warning: ACPI tables are larger than 64k.");
error_report("Warning: migration may not work.");
error_report("Warning: please remove CPUs, NUMA nodes, "
"memory slots or PCI bridges.");
}
acpi_align_size(tables->table_data, ACPI_BUILD_TABLE_SIZE);
}
acpi_align_size(tables->linker, 0x1000);
acpi_align_size(tables->linker, ACPI_BUILD_ALIGN_SIZE);
/* Cleanup memory that's no longer used. */
g_array_free(table_offsets, true);
+38 -50
View File
@@ -181,57 +181,45 @@ DefinitionBlock (
Scope(\_SB) {
Scope(PCI0) {
Name(_PRT, Package() {
/* PCI IRQ routing table, example from ACPI 2.0a specification,
section 6.2.8.1 */
/* Note: we provide the same info as the PCI routing
table of the Bochs BIOS */
Method (_PRT, 0) {
Store(Package(128) {}, Local0)
Store(Zero, Local1)
While(LLess(Local1, 128)) {
// slot = pin >> 2
Store(ShiftRight(Local1, 2), Local2)
#define prt_slot(nr, lnk0, lnk1, lnk2, lnk3) \
Package() { nr##ffff, 0, lnk0, 0 }, \
Package() { nr##ffff, 1, lnk1, 0 }, \
Package() { nr##ffff, 2, lnk2, 0 }, \
Package() { nr##ffff, 3, lnk3, 0 }
// lnk = (slot + pin) & 3
Store(And(Add(Local1, Local2), 3), Local3)
If (LEqual(Local3, 0)) {
Store(Package(4) { Zero, Zero, LNKD, Zero }, Local4)
}
If (LEqual(Local3, 1)) {
// device 1 is the power-management device, needs SCI
If (LEqual(Local1, 4)) {
Store(Package(4) { Zero, Zero, LNKS, Zero }, Local4)
} Else {
Store(Package(4) { Zero, Zero, LNKA, Zero }, Local4)
}
}
If (LEqual(Local3, 2)) {
Store(Package(4) { Zero, Zero, LNKB, Zero }, Local4)
}
If (LEqual(Local3, 3)) {
Store(Package(4) { Zero, Zero, LNKC, Zero }, Local4)
}
#define prt_slot0(nr) prt_slot(nr, LNKD, LNKA, LNKB, LNKC)
#define prt_slot1(nr) prt_slot(nr, LNKA, LNKB, LNKC, LNKD)
#define prt_slot2(nr) prt_slot(nr, LNKB, LNKC, LNKD, LNKA)
#define prt_slot3(nr) prt_slot(nr, LNKC, LNKD, LNKA, LNKB)
// Complete the interrupt routing entry:
// Package(4) { 0x[slot]FFFF, [pin], [link], 0) }
prt_slot0(0x0000),
/* Device 1 is power mgmt device, and can only use irq 9 */
prt_slot(0x0001, LNKS, LNKB, LNKC, LNKD),
prt_slot2(0x0002),
prt_slot3(0x0003),
prt_slot0(0x0004),
prt_slot1(0x0005),
prt_slot2(0x0006),
prt_slot3(0x0007),
prt_slot0(0x0008),
prt_slot1(0x0009),
prt_slot2(0x000a),
prt_slot3(0x000b),
prt_slot0(0x000c),
prt_slot1(0x000d),
prt_slot2(0x000e),
prt_slot3(0x000f),
prt_slot0(0x0010),
prt_slot1(0x0011),
prt_slot2(0x0012),
prt_slot3(0x0013),
prt_slot0(0x0014),
prt_slot1(0x0015),
prt_slot2(0x0016),
prt_slot3(0x0017),
prt_slot0(0x0018),
prt_slot1(0x0019),
prt_slot2(0x001a),
prt_slot3(0x001b),
prt_slot0(0x001c),
prt_slot1(0x001d),
prt_slot2(0x001e),
prt_slot3(0x001f),
})
Store(Or(ShiftLeft(Local2, 16), 0xFFFF), Index(Local4, 0))
Store(And(Local1, 3), Index(Local4, 1))
Store(Local4, Index(Local0, Local1))
Increment(Local1)
}
Return(Local0)
}
}
Field(PCI0.ISA.P40C, ByteAcc, NoLock, Preserve) {
@@ -314,7 +302,7 @@ DefinitionBlock (
/****************************************************************
* General purpose events
****************************************************************/
External(\_SB.PCI0.MEMORY_HOPTLUG_DEVICE.MEMORY_SLOT_SCAN_METHOD, MethodObj)
External(\_SB.PCI0.MEMORY_HOTPLUG_DEVICE.MEMORY_SLOT_SCAN_METHOD, MethodObj)
Scope(\_GPE) {
Name(_HID, "ACPI0006")
@@ -333,7 +321,7 @@ DefinitionBlock (
}
Method(_E03) {
// Memory hotplug event
\_SB.PCI0.MEMORY_HOPTLUG_DEVICE.MEMORY_SLOT_SCAN_METHOD()
\_SB.PCI0.MEMORY_HOTPLUG_DEVICE.MEMORY_SLOT_SCAN_METHOD()
}
Method(_L04) {
}
File diff suppressed because it is too large. Load diff
-52
View File
@@ -14,10 +14,8 @@
*/
#include "qemu-common.h"
#include "qemu/host-utils.h"
#include "sysemu/sysemu.h"
#include "sysemu/kvm.h"
#include "sysemu/cpus.h"
#include "hw/sysbus.h"
#include "hw/kvm/clock.h"
@@ -36,48 +34,6 @@ typedef struct KVMClockState {
bool clock_valid;
} KVMClockState;
struct pvclock_vcpu_time_info {
uint32_t version;
uint32_t pad0;
uint64_t tsc_timestamp;
uint64_t system_time;
uint32_t tsc_to_system_mul;
int8_t tsc_shift;
uint8_t flags;
uint8_t pad[2];
} __attribute__((__packed__)); /* 32 bytes */
static uint64_t kvmclock_current_nsec(KVMClockState *s)
{
CPUState *cpu = first_cpu;
CPUX86State *env = cpu->env_ptr;
hwaddr kvmclock_struct_pa = env->system_time_msr & ~1ULL;
uint64_t migration_tsc = env->tsc;
struct pvclock_vcpu_time_info time;
uint64_t delta;
uint64_t nsec_lo;
uint64_t nsec_hi;
uint64_t nsec;
if (!(env->system_time_msr & 1ULL)) {
/* KVM clock not active */
return 0;
}
cpu_physical_memory_read(kvmclock_struct_pa, &time, sizeof(time));
assert(time.tsc_timestamp <= migration_tsc);
delta = migration_tsc - time.tsc_timestamp;
if (time.tsc_shift < 0) {
delta >>= -time.tsc_shift;
} else {
delta <<= time.tsc_shift;
}
mulu64(&nsec_lo, &nsec_hi, delta, time.tsc_to_system_mul);
nsec = (nsec_lo >> 32) | (nsec_hi << 32);
return nsec + time.system_time;
}
static void kvmclock_vm_state_change(void *opaque, int running,
RunState state)
@@ -89,15 +45,9 @@ static void kvmclock_vm_state_change(void *opaque, int running,
if (running) {
struct kvm_clock_data data;
uint64_t time_at_migration = kvmclock_current_nsec(s);
s->clock_valid = false;
/* We can't rely on the migrated clock value, just discard it */
if (time_at_migration) {
s->clock = time_at_migration;
}
data.clock = s->clock;
data.flags = 0;
ret = kvm_vm_ioctl(kvm_state, KVM_SET_CLOCK, &data);
@@ -125,8 +75,6 @@ static void kvmclock_vm_state_change(void *opaque, int running,
if (s->clock_valid) {
return;
}
cpu_synchronize_all_states();
ret = kvm_vm_ioctl(kvm_state, KVM_GET_CLOCK, &data);
if (ret < 0) {
fprintf(stderr, "KVM_GET_CLOCK failed: %s\n", strerror(ret));
+12 -4
View File
@@ -72,8 +72,15 @@
#define DPRINTF(fmt, ...)
#endif
/* Leave a chunk of memory at the top of RAM for the BIOS ACPI tables. */
#define ACPI_DATA_SIZE 0x10000
/* Leave a chunk of memory at the top of RAM for the BIOS ACPI tables
* (128K) and other BIOS datastructures (less than 4K reported to be used at
* the moment, 32K should be enough for a while). */
unsigned acpi_data_size = 0x20000 + 0x8000;
void pc_set_legacy_acpi_data_size(void)
{
acpi_data_size = 0x10000;
}
#define BIOS_CFG_IOPORT 0x510
#define FW_CFG_ACPI_TABLES (FW_CFG_ARCH_LOCAL + 0)
#define FW_CFG_SMBIOS_ENTRIES (FW_CFG_ARCH_LOCAL + 1)
@@ -811,8 +818,9 @@ static void load_linux(FWCfgState *fw_cfg,
initrd_max = 0x37ffffff;
}
if (initrd_max >= max_ram_size-ACPI_DATA_SIZE)
initrd_max = max_ram_size-ACPI_DATA_SIZE-1;
if (initrd_max >= max_ram_size - acpi_data_size) {
initrd_max = max_ram_size - acpi_data_size - 1;
}
fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_ADDR, cmdline_addr);
fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE, strlen(kernel_cmdline)+1);
+24 -12
View File
@@ -61,6 +61,7 @@ static const int ide_irq[MAX_IDE_BUS] = { 14, 15 };
static bool has_pci_info;
static bool has_acpi_build = true;
static int legacy_acpi_table_size;
static bool smbios_defaults = true;
static bool smbios_legacy_mode;
/* Make sure that guest addresses aligned at 1Gbyte boundaries get mapped to
@@ -114,7 +115,7 @@ static void pc_init1(MachineState *machine,
lowmem = 0xe0000000;
}
/* Handle the machine opt max-ram-below-4g. It is basicly doing
/* Handle the machine opt max-ram-below-4g. It is basically doing
* min(qemu limit, user limit).
*/
if (lowmem > pc_machine->max_ram_below_4g) {
@@ -163,6 +164,7 @@ static void pc_init1(MachineState *machine,
guest_info = pc_guest_info_init(below_4g_mem_size, above_4g_mem_size);
guest_info->has_acpi_build = has_acpi_build;
guest_info->legacy_acpi_table_size = legacy_acpi_table_size;
guest_info->has_pci_info = has_pci_info;
guest_info->isapc_ram_fw = !pci_enabled;
@@ -297,8 +299,26 @@ static void pc_init_pci(MachineState *machine)
static void pc_compat_2_0(MachineState *machine)
{
/* This value depends on the actual DSDT and SSDT compiled into
* the source QEMU; unfortunately it depends on the binary and
* not on the machine type, so we cannot make pc-i440fx-1.7 work on
* both QEMU 1.7 and QEMU 2.0.
*
* Large variations cause migration to fail for more than one
* consecutive value of the "-smp" maxcpus option.
*
* For small variations of the kind caused by different iasl versions,
* the 4k rounding usually leaves slack. However, there could be still
* one or two values that break. For QEMU 1.7 and QEMU 2.0 the
* slack is only ~10 bytes before one "-smp maxcpus" value breaks!
*
* 6652 is valid for QEMU 2.0, the right value for pc-i440fx-1.7 on
* QEMU 1.7 it is 6414. For RHEL/CentOS 7.0 it is 6418.
*/
legacy_acpi_table_size = 6652;
smbios_legacy_mode = true;
has_reserved_memory = false;
pc_set_legacy_acpi_data_size();
}
static void pc_compat_1_7(MachineState *machine)
@@ -307,6 +327,7 @@ static void pc_compat_1_7(MachineState *machine)
smbios_defaults = false;
gigabyte_align = false;
option_rom_has_mr = true;
legacy_acpi_table_size = 6414;
x86_cpu_compat_disable_kvm_features(FEAT_1_ECX, CPUID_EXT_X2APIC);
}
@@ -386,19 +407,10 @@ static void pc_init_pci_1_2(MachineState *machine)
pc_init_pci(machine);
}
/* PC init function for pc-0.10 to pc-0.13, and reused by xenfv */
/* PC init function for pc-0.10 to pc-0.13 */
static void pc_init_pci_no_kvmclock(MachineState *machine)
{
has_pci_info = false;
has_acpi_build = false;
smbios_defaults = false;
gigabyte_align = false;
smbios_legacy_mode = true;
has_reserved_memory = false;
option_rom_has_mr = true;
rom_file_has_mr = false;
x86_cpu_compat_disable_kvm_features(FEAT_KVM, KVM_FEATURE_PV_EOI);
enable_compat_apic_id_mode();
pc_compat_1_2(machine);
pc_init1(machine, 1, 0);
}
+7 -1
View File
@@ -103,7 +103,7 @@ static void pc_q35_init(MachineState *machine)
lowmem = 0xb0000000;
}
/* Handle the machine opt max-ram-below-4g. It is basicly doing
/* Handle the machine opt max-ram-below-4g. It is basically doing
* min(qemu limit, user limit).
*/
if (lowmem > pc_machine->max_ram_below_4g) {
@@ -155,6 +155,11 @@ static void pc_q35_init(MachineState *machine)
guest_info->has_acpi_build = has_acpi_build;
guest_info->has_reserved_memory = has_reserved_memory;
/* Migration was not supported in 2.0 for Q35, so do not bother
* with this hack (see hw/i386/acpi-build.c).
*/
guest_info->legacy_acpi_table_size = 0;
if (smbios_defaults) {
MachineClass *mc = MACHINE_GET_CLASS(machine);
/* These values are guest ABI, do not change */
@@ -277,6 +282,7 @@ static void pc_compat_2_0(MachineState *machine)
{
smbios_legacy_mode = true;
has_reserved_memory = false;
pc_set_legacy_acpi_data_size();
}
static void pc_compat_1_7(MachineState *machine)
+2 -2
View File
@@ -410,7 +410,7 @@ DefinitionBlock (
/****************************************************************
* General purpose events
****************************************************************/
External(\_SB.PCI0.MEMORY_HOPTLUG_DEVICE.MEMORY_SLOT_SCAN_METHOD, MethodObj)
External(\_SB.PCI0.MEMORY_HOTPLUG_DEVICE.MEMORY_SLOT_SCAN_METHOD, MethodObj)
Scope(\_GPE) {
Name(_HID, "ACPI0006")
@@ -425,7 +425,7 @@ DefinitionBlock (
}
Method(_E03) {
// Memory hotplug event
\_SB.PCI0.MEMORY_HOPTLUG_DEVICE.MEMORY_SLOT_SCAN_METHOD()
\_SB.PCI0.MEMORY_HOTPLUG_DEVICE.MEMORY_SLOT_SCAN_METHOD()
}
Method(_L04) {
}
+8 -8
View File
@@ -39,10 +39,10 @@ ACPI_EXTRACT_ALL_CODE ssdm_mem_aml
DefinitionBlock ("ssdt-mem.aml", "SSDT", 0x02, "BXPC", "CSSDT", 0x1)
{
External(\_SB.PCI0.MEMORY_HOPTLUG_DEVICE.MEMORY_SLOT_CRS_METHOD, MethodObj)
External(\_SB.PCI0.MEMORY_HOPTLUG_DEVICE.MEMORY_SLOT_STATUS_METHOD, MethodObj)
External(\_SB.PCI0.MEMORY_HOPTLUG_DEVICE.MEMORY_SLOT_OST_METHOD, MethodObj)
External(\_SB.PCI0.MEMORY_HOPTLUG_DEVICE.MEMORY_SLOT_PROXIMITY_METHOD, MethodObj)
External(\_SB.PCI0.MEMORY_HOTPLUG_DEVICE.MEMORY_SLOT_CRS_METHOD, MethodObj)
External(\_SB.PCI0.MEMORY_HOTPLUG_DEVICE.MEMORY_SLOT_STATUS_METHOD, MethodObj)
External(\_SB.PCI0.MEMORY_HOTPLUG_DEVICE.MEMORY_SLOT_OST_METHOD, MethodObj)
External(\_SB.PCI0.MEMORY_HOTPLUG_DEVICE.MEMORY_SLOT_PROXIMITY_METHOD, MethodObj)
Scope(\_SB) {
/* v------------------ DO NOT EDIT ------------------v */
@@ -58,19 +58,19 @@ DefinitionBlock ("ssdt-mem.aml", "SSDT", 0x02, "BXPC", "CSSDT", 0x1)
Name(_HID, EISAID("PNP0C80"))
Method(_CRS, 0) {
Return(\_SB.PCI0.MEMORY_HOPTLUG_DEVICE.MEMORY_SLOT_CRS_METHOD(_UID))
Return(\_SB.PCI0.MEMORY_HOTPLUG_DEVICE.MEMORY_SLOT_CRS_METHOD(_UID))
}
Method(_STA, 0) {
Return(\_SB.PCI0.MEMORY_HOPTLUG_DEVICE.MEMORY_SLOT_STATUS_METHOD(_UID))
Return(\_SB.PCI0.MEMORY_HOTPLUG_DEVICE.MEMORY_SLOT_STATUS_METHOD(_UID))
}
Method(_PXM, 0) {
Return(\_SB.PCI0.MEMORY_HOPTLUG_DEVICE.MEMORY_SLOT_PROXIMITY_METHOD(_UID))
Return(\_SB.PCI0.MEMORY_HOTPLUG_DEVICE.MEMORY_SLOT_PROXIMITY_METHOD(_UID))
}
Method(_OST, 3) {
\_SB.PCI0.MEMORY_HOPTLUG_DEVICE.MEMORY_SLOT_OST_METHOD(_UID, Arg0, Arg1, Arg2)
\_SB.PCI0.MEMORY_HOTPLUG_DEVICE.MEMORY_SLOT_OST_METHOD(_UID, Arg0, Arg1, Arg2)
}
}
}
+1 -1
View File
@@ -120,7 +120,7 @@ DefinitionBlock ("ssdt-misc.aml", "SSDT", 0x01, "BXPC", "BXSSDTSUSP", 0x1)
External(MEMORY_SLOT_NOTIFY_METHOD, MethodObj)
Scope(\_SB.PCI0) {
Device(MEMORY_HOPTLUG_DEVICE) {
Device(MEMORY_HOTPLUG_DEVICE) {
Name(_HID, "PNP0A06")
Name(_UID, "Memory hotplug resources")
+29
View File
@@ -499,6 +499,18 @@ static void ide_rw_error(IDEState *s) {
ide_set_irq(s->bus);
}
static bool ide_sect_range_ok(IDEState *s,
uint64_t sector, uint64_t nb_sectors)
{
uint64_t total_sectors;
bdrv_get_geometry(s->bs, &total_sectors);
if (sector > total_sectors || nb_sectors > total_sectors - sector) {
return false;
}
return true;
}
static void ide_sector_read_cb(void *opaque, int ret)
{
IDEState *s = opaque;
@@ -554,6 +566,11 @@ void ide_sector_read(IDEState *s)
printf("sector=%" PRId64 "\n", sector_num);
#endif
if (!ide_sect_range_ok(s, sector_num, n)) {
ide_rw_error(s);
return;
}
s->iov.iov_base = s->io_buffer;
s->iov.iov_len = n * BDRV_SECTOR_SIZE;
qemu_iovec_init_external(&s->qiov, &s->iov, 1);
@@ -671,6 +688,13 @@ void ide_dma_cb(void *opaque, int ret)
sector_num, n, s->dma_cmd);
#endif
if ((s->dma_cmd == IDE_DMA_READ || s->dma_cmd == IDE_DMA_WRITE) &&
!ide_sect_range_ok(s, sector_num, n)) {
dma_buf_commit(s);
ide_dma_error(s);
return;
}
switch (s->dma_cmd) {
case IDE_DMA_READ:
s->bus->dma->aiocb = dma_bdrv_read(s->bs, &s->sg, sector_num,
@@ -790,6 +814,11 @@ void ide_sector_write(IDEState *s)
n = s->req_nb_sectors;
}
if (!ide_sect_range_ok(s, sector_num, n)) {
ide_rw_error(s);
return;
}
s->iov.iov_base = s->io_buffer;
s->iov.iov_len = n * BDRV_SECTOR_SIZE;
qemu_iovec_init_external(&s->qiov, &s->iov, 1);
+6
View File
@@ -252,6 +252,12 @@ static void pc_dimm_realize(DeviceState *dev, Error **errp)
error_setg(errp, "'" PC_DIMM_MEMDEV_PROP "' property is not set");
return;
}
if (dimm->node >= nb_numa_nodes) {
error_setg(errp, "'DIMM property " PC_DIMM_NODE_PROP " has value %"
PRIu32 "' which exceeds the number of numa nodes: %d",
dimm->node, nb_numa_nodes);
return;
}
}
static MemoryRegion *pc_dimm_get_memory_region(PCDIMMDevice *dimm)
+17 -3
View File
@@ -792,9 +792,23 @@ static int64_t load_kernel (void)
loaderparams.kernel_filename);
exit(1);
}
/* Sanity check where the kernel has been linked */
if (kvm_enabled()) {
if (kernel_entry & 0x80000000ll) {
error_report("KVM guest kernels must be linked in useg. "
"Did you forget to enable CONFIG_KVM_GUEST?");
exit(1);
}
xlate_to_kseg0 = cpu_mips_kvm_um_phys_to_kseg0;
} else {
if (!(kernel_entry & 0x80000000ll)) {
error_report("KVM guest kernels aren't supported with TCG. "
"Did you unintentionally enable CONFIG_KVM_GUEST?");
exit(1);
}
xlate_to_kseg0 = cpu_mips_phys_to_kseg0;
}
@@ -1028,7 +1042,7 @@ void mips_malta_init(MachineState *machine)
fl_idx++;
if (kernel_filename) {
ram_low_size = MIN(ram_size, 256 << 20);
/* For KVM T&E we reserve 1MB of RAM for running bootloader */
/* For KVM we reserve 1MB of RAM for running bootloader */
if (kvm_enabled()) {
ram_low_size -= 0x100000;
bootloader_run_addr = 0x40000000 + ram_low_size;
@@ -1052,10 +1066,10 @@ void mips_malta_init(MachineState *machine)
bootloader_run_addr, kernel_entry);
}
} else {
/* The flash region isn't executable from a KVM T&E guest */
/* The flash region isn't executable from a KVM guest */
if (kvm_enabled()) {
error_report("KVM enabled but no -kernel argument was specified. "
"Booting from flash is not supported with KVM T&E.");
"Booting from flash is not supported with KVM.");
exit(1);
}
/* Load firmware from flash. */
+1
View File
@@ -67,6 +67,7 @@ static const VMStateDescription vmstate_imx_ccm = {
VMSTATE_UINT32(pmcr0, IMXCCMState),
VMSTATE_UINT32(pmcr1, IMXCCMState),
VMSTATE_UINT32(pll_refclk_freq, IMXCCMState),
VMSTATE_END_OF_LIST()
},
.post_load = imx_ccm_post_load,
};
+30 -10
View File
@@ -120,11 +120,20 @@ typedef struct VFIOINTx {
} VFIOINTx;
typedef struct VFIOMSIVector {
EventNotifier interrupt; /* eventfd triggered on interrupt */
EventNotifier kvm_interrupt; /* eventfd triggered for KVM irqfd bypass */
/*
* Two interrupt paths are configured per vector. The first, is only used
* for interrupts injected via QEMU. This is typically the non-accel path,
* but may also be used when we want QEMU to handle masking and pending
* bits. The KVM path bypasses QEMU and is therefore higher performance,
* but requires masking at the device. virq is used to track the MSI route
* through KVM, thus kvm_interrupt is only available when virq is set to a
* valid (>= 0) value.
*/
EventNotifier interrupt;
EventNotifier kvm_interrupt;
struct VFIODevice *vdev; /* back pointer to device */
MSIMessage msg; /* cache the MSI message so we know when it changes */
int virq; /* KVM irqchip route for QEMU bypass */
int virq;
bool use;
} VFIOMSIVector;
@@ -681,13 +690,24 @@ static int vfio_enable_vectors(VFIODevice *vdev, bool msix)
fds = (int32_t *)&irq_set->data;
for (i = 0; i < vdev->nr_vectors; i++) {
if (!vdev->msi_vectors[i].use) {
fds[i] = -1;
} else if (vdev->msi_vectors[i].virq >= 0) {
fds[i] = event_notifier_get_fd(&vdev->msi_vectors[i].kvm_interrupt);
} else {
fds[i] = event_notifier_get_fd(&vdev->msi_vectors[i].interrupt);
int fd = -1;
/*
* MSI vs MSI-X - The guest has direct access to MSI mask and pending
* bits, therefore we always use the KVM signaling path when setup.
* MSI-X mask and pending bits are emulated, so we want to use the
* KVM signaling path only when configured and unmasked.
*/
if (vdev->msi_vectors[i].use) {
if (vdev->msi_vectors[i].virq < 0 ||
(msix && msix_is_masked(&vdev->pdev, i))) {
fd = event_notifier_get_fd(&vdev->msi_vectors[i].interrupt);
} else {
fd = event_notifier_get_fd(&vdev->msi_vectors[i].kvm_interrupt);
}
}
fds[i] = fd;
}
ret = ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, irq_set);
@@ -2489,7 +2509,7 @@ static void vfio_iommu_map_notify(Notifier *n, void *data)
return;
}
if (iotlb->perm != IOMMU_NONE) {
if ((iotlb->perm & IOMMU_RW) != IOMMU_NONE) {
vaddr = memory_region_get_ram_ptr(mr) + xlat;
ret = vfio_dma_map(container, iotlb->iova,
+28 -14
View File
@@ -115,6 +115,7 @@ unsigned vhost_net_get_features(struct vhost_net *net, unsigned features)
void vhost_net_ack_features(struct vhost_net *net, unsigned features)
{
net->dev.acked_features = net->dev.backend_features;
vhost_ack_features(&net->dev, vhost_net_get_feature_bits(net), features);
}
@@ -188,9 +189,13 @@ bool vhost_net_query(VHostNetState *net, VirtIODevice *dev)
return vhost_dev_query(&net->dev, dev);
}
static void vhost_net_set_vq_index(struct vhost_net *net, int vq_index)
{
net->dev.vq_index = vq_index;
}
static int vhost_net_start_one(struct vhost_net *net,
VirtIODevice *dev,
int vq_index)
VirtIODevice *dev)
{
struct vhost_vring_file file = { };
int r;
@@ -201,7 +206,6 @@ static int vhost_net_start_one(struct vhost_net *net,
net->dev.nvqs = 2;
net->dev.vqs = net->vqs;
net->dev.vq_index = vq_index;
r = vhost_dev_enable_notifiers(&net->dev, dev);
if (r < 0) {
@@ -294,7 +298,7 @@ int vhost_net_start(VirtIODevice *dev, NetClientState *ncs,
BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(dev)));
VirtioBusState *vbus = VIRTIO_BUS(qbus);
VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(vbus);
int r, i = 0;
int r, e, i;
if (!vhost_net_device_endian_ok(dev)) {
error_report("vhost-net does not support cross-endian");
@@ -309,11 +313,7 @@ int vhost_net_start(VirtIODevice *dev, NetClientState *ncs,
}
for (i = 0; i < total_queues; i++) {
r = vhost_net_start_one(get_vhost_net(ncs[i].peer), dev, i * 2);
if (r < 0) {
goto err;
}
vhost_net_set_vq_index(get_vhost_net(ncs[i].peer), i * 2);
}
r = k->set_guest_notifiers(qbus->parent, total_queues * 2, true);
@@ -322,12 +322,26 @@ int vhost_net_start(VirtIODevice *dev, NetClientState *ncs,
goto err;
}
for (i = 0; i < total_queues; i++) {
r = vhost_net_start_one(get_vhost_net(ncs[i].peer), dev);
if (r < 0) {
goto err_start;
}
}
return 0;
err:
err_start:
while (--i >= 0) {
vhost_net_stop_one(get_vhost_net(ncs[i].peer), dev);
}
e = k->set_guest_notifiers(qbus->parent, total_queues * 2, false);
if (e < 0) {
fprintf(stderr, "vhost guest notifier cleanup failed: %d\n", e);
fflush(stderr);
}
err:
return r;
}
@@ -339,16 +353,16 @@ void vhost_net_stop(VirtIODevice *dev, NetClientState *ncs,
VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(vbus);
int i, r;
for (i = 0; i < total_queues; i++) {
vhost_net_stop_one(get_vhost_net(ncs[i].peer), dev);
}
r = k->set_guest_notifiers(qbus->parent, total_queues * 2, false);
if (r < 0) {
fprintf(stderr, "vhost guest notifier cleanup failed: %d\n", r);
fflush(stderr);
}
assert(r >= 0);
for (i = 0; i < total_queues; i++) {
vhost_net_stop_one(get_vhost_net(ncs[i].peer), dev);
}
}
void vhost_net_cleanup(struct vhost_net *net)
+26 -5
View File
@@ -125,10 +125,23 @@ static void virtio_net_vhost_status(VirtIONet *n, uint8_t status)
return;
}
if (!n->vhost_started) {
int r;
int r, i;
if (!vhost_net_query(get_vhost_net(nc->peer), vdev)) {
return;
}
/* Any packets outstanding? Purge them to avoid touching rings
* when vhost is running.
*/
for (i = 0; i < queues; i++) {
NetClientState *qnc = qemu_get_subqueue(n->nic, i);
/* Purge both directions: TX and RX. */
qemu_net_queue_purge(qnc->peer->incoming_queue, qnc);
qemu_net_queue_purge(qnc->incoming_queue, qnc->peer);
}
n->vhost_started = 1;
r = vhost_net_start(vdev, n->nic->ncs, queues);
if (r < 0) {
@@ -1112,8 +1125,6 @@ static int32_t virtio_net_flush_tx(VirtIONetQueue *q)
return num_packets;
}
assert(vdev->vm_running);
if (q->async_tx.elem.out_num) {
virtio_queue_set_notification(q->tx_vq, 0);
return num_packets;
@@ -1224,7 +1235,12 @@ static void virtio_net_tx_timer(void *opaque)
VirtIONetQueue *q = opaque;
VirtIONet *n = q->n;
VirtIODevice *vdev = VIRTIO_DEVICE(n);
assert(vdev->vm_running);
/* This happens when device was stopped but BH wasn't. */
if (!vdev->vm_running) {
/* Make sure tx waiting is set, so we'll run when restarted. */
assert(q->tx_waiting);
return;
}
q->tx_waiting = 0;
@@ -1244,7 +1260,12 @@ static void virtio_net_tx_bh(void *opaque)
VirtIODevice *vdev = VIRTIO_DEVICE(n);
int32_t ret;
assert(vdev->vm_running);
/* This happens when device was stopped but BH wasn't. */
if (!vdev->vm_running) {
/* Make sure tx waiting is set, so we'll run when restarted. */
assert(q->tx_waiting);
return;
}
q->tx_waiting = 0;
+10
View File
@@ -34,6 +34,7 @@
#define PCI_DEVICE_ID_VMWARE_VMXNET3_REVISION 0x1
#define VMXNET3_MSIX_BAR_SIZE 0x2000
#define MIN_BUF_SIZE 60
#define VMXNET3_BAR0_IDX (0)
#define VMXNET3_BAR1_IDX (1)
@@ -1871,12 +1872,21 @@ vmxnet3_receive(NetClientState *nc, const uint8_t *buf, size_t size)
{
VMXNET3State *s = qemu_get_nic_opaque(nc);
size_t bytes_indicated;
uint8_t min_buf[MIN_BUF_SIZE];
if (!vmxnet3_can_receive(nc)) {
VMW_PKPRN("Cannot receive now");
return -1;
}
/* Pad to minimum Ethernet frame length */
if (size < sizeof(min_buf)) {
memcpy(min_buf, buf, size);
memset(&min_buf[size], 0, sizeof(min_buf) - size);
buf = min_buf;
size = sizeof(min_buf);
}
if (s->peer_has_vhdr) {
vmxnet_rx_pkt_set_vhdr(s->rx_pkt, (struct virtio_net_hdr *)buf);
buf += sizeof(struct virtio_net_hdr);
+4 -3
View File
@@ -1147,9 +1147,10 @@ uint32_t pci_default_read_config(PCIDevice *d,
return le32_to_cpu(val);
}
void pci_default_write_config(PCIDevice *d, uint32_t addr, uint32_t val, int l)
void pci_default_write_config(PCIDevice *d, uint32_t addr, uint32_t val_in, int l)
{
int i, was_irq_disabled = pci_irq_disabled(d);
uint32_t val = val_in;
for (i = 0; i < l; val >>= 8, ++i) {
uint8_t wmask = d->wmask[addr + i];
@@ -1171,8 +1172,8 @@ void pci_default_write_config(PCIDevice *d, uint32_t addr, uint32_t val, int l)
& PCI_COMMAND_MASTER);
}
msi_write_config(d, addr, val, l);
msix_write_config(d, addr, val, l);
msi_write_config(d, addr, val_in, l);
msix_write_config(d, addr, val_in, l);
}
/***********************************************************/
+1 -2
View File
@@ -701,8 +701,7 @@ void ppce500_init(MachineState *machine, PPCE500Params *params)
machine->ram_size = ram_size;
/* Register Memory */
memory_region_init_ram(ram, NULL, "mpc8544ds.ram", ram_size);
vmstate_register_ram_global(ram);
memory_region_allocate_system_memory(ram, NULL, "mpc8544ds.ram", ram_size);
memory_region_add_subregion(address_space_mem, 0, ram);
dev = qdev_create(NULL, "e500-ccsr");
+2 -2
View File
@@ -200,13 +200,13 @@ static void ppc_core99_init(MachineState *machine)
}
/* allocate RAM */
memory_region_init_ram(ram, NULL, "ppc_core99.ram", ram_size);
vmstate_register_ram_global(ram);
memory_region_allocate_system_memory(ram, NULL, "ppc_core99.ram", ram_size);
memory_region_add_subregion(get_system_memory(), 0, ram);
/* allocate and load BIOS */
memory_region_init_ram(bios, NULL, "ppc_core99.bios", BIOS_SIZE);
vmstate_register_ram_global(bios);
if (bios_name == NULL)
bios_name = PROM_FILENAME;
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
+3 -2
View File
@@ -130,13 +130,14 @@ static void ppc_heathrow_init(MachineState *machine)
exit(1);
}
memory_region_init_ram(ram, NULL, "ppc_heathrow.ram", ram_size);
vmstate_register_ram_global(ram);
memory_region_allocate_system_memory(ram, NULL, "ppc_heathrow.ram",
ram_size);
memory_region_add_subregion(sysmem, 0, ram);
/* allocate and load BIOS */
memory_region_init_ram(bios, NULL, "ppc_heathrow.bios", BIOS_SIZE);
vmstate_register_ram_global(bios);
if (bios_name == NULL)
bios_name = PROM_FILENAME;
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
+14 -9
View File
@@ -199,8 +199,8 @@ static void ref405ep_init(MachineState *machine)
MemoryRegion *sysmem = get_system_memory();
/* XXX: fix this */
memory_region_init_ram(&ram_memories[0], NULL, "ef405ep.ram", 0x08000000);
vmstate_register_ram_global(&ram_memories[0]);
memory_region_allocate_system_memory(&ram_memories[0], NULL, "ef405ep.ram",
0x08000000);
ram_bases[0] = 0;
ram_sizes[0] = 0x08000000;
memory_region_init(&ram_memories[1], NULL, "ef405ep.ram1", 0);
@@ -248,6 +248,7 @@ static void ref405ep_init(MachineState *machine)
bios = g_new(MemoryRegion, 1);
memory_region_init_ram(bios, NULL, "ef405ep.bios", BIOS_SIZE);
vmstate_register_ram_global(bios);
if (bios_name == NULL)
bios_name = BIOS_FILENAME;
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
@@ -509,6 +510,7 @@ static void taihu_405ep_init(MachineState *machine)
MemoryRegion *sysmem = get_system_memory();
MemoryRegion *bios;
MemoryRegion *ram_memories = g_malloc(2 * sizeof(*ram_memories));
MemoryRegion *ram = g_malloc0(sizeof(*ram));
hwaddr ram_bases[2], ram_sizes[2];
long bios_size;
target_ulong kernel_base, initrd_base;
@@ -518,17 +520,20 @@ static void taihu_405ep_init(MachineState *machine)
DriveInfo *dinfo;
/* RAM is soldered to the board so the size cannot be changed */
memory_region_init_ram(&ram_memories[0], NULL,
"taihu_405ep.ram-0", 0x04000000);
vmstate_register_ram_global(&ram_memories[0]);
ram_size = 0x08000000;
memory_region_allocate_system_memory(ram, NULL, "taihu_405ep.ram",
ram_size);
ram_bases[0] = 0;
ram_sizes[0] = 0x04000000;
memory_region_init_ram(&ram_memories[1], NULL,
"taihu_405ep.ram-1", 0x04000000);
vmstate_register_ram_global(&ram_memories[1]);
memory_region_init_alias(&ram_memories[0], NULL,
"taihu_405ep.ram-0", ram, ram_bases[0],
ram_sizes[0]);
ram_bases[1] = 0x04000000;
ram_sizes[1] = 0x04000000;
ram_size = 0x08000000;
memory_region_init_alias(&ram_memories[1], NULL,
"taihu_405ep.ram-1", ram, ram_bases[1],
ram_sizes[1]);
#ifdef DEBUG_BOARD_INIT
printf("%s: register cpu\n", __func__);
#endif
+1
View File
@@ -23,6 +23,7 @@
*/
#include "hw/hw.h"
#include "hw/ppc/ppc.h"
#include "hw/boards.h"
#include "ppc405.h"
#include "hw/char/serial.h"
#include "qemu/timer.h"
+27 -12
View File
@@ -24,6 +24,7 @@
#include "hw/hw.h"
#include "hw/ppc/ppc.h"
#include "hw/ppc/ppc4xx.h"
#include "hw/boards.h"
#include "qemu/log.h"
#include "exec/address-spaces.h"
@@ -682,28 +683,20 @@ ram_addr_t ppc4xx_sdram_adjust(ram_addr_t ram_size, int nr_banks,
hwaddr ram_sizes[],
const unsigned int sdram_bank_sizes[])
{
MemoryRegion *ram = g_malloc0(sizeof(*ram));
ram_addr_t size_left = ram_size;
ram_addr_t base = 0;
unsigned int bank_size;
int i;
int j;
for (i = 0; i < nr_banks; i++) {
for (j = 0; sdram_bank_sizes[j] != 0; j++) {
unsigned int bank_size = sdram_bank_sizes[j];
bank_size = sdram_bank_sizes[j];
if (bank_size <= size_left) {
char name[32];
snprintf(name, sizeof(name), "ppc4xx.sdram%d", i);
memory_region_init_ram(&ram_memories[i], NULL, name, bank_size);
vmstate_register_ram_global(&ram_memories[i]);
ram_bases[i] = base;
ram_sizes[i] = bank_size;
base += bank_size;
size_left -= bank_size;
break;
}
}
if (!size_left) {
/* No need to use the remaining banks. */
break;
@@ -711,9 +704,31 @@ ram_addr_t ppc4xx_sdram_adjust(ram_addr_t ram_size, int nr_banks,
}
ram_size -= size_left;
if (size_left)
if (size_left) {
printf("Truncating memory to %d MiB to fit SDRAM controller limits.\n",
(int)(ram_size >> 20));
}
memory_region_allocate_system_memory(ram, NULL, "ppc4xx.sdram", ram_size);
size_left = ram_size;
for (i = 0; i < nr_banks && size_left; i++) {
for (j = 0; sdram_bank_sizes[j] != 0; j++) {
bank_size = sdram_bank_sizes[j];
if (bank_size <= size_left) {
char name[32];
snprintf(name, sizeof(name), "ppc4xx.sdram%d", i);
memory_region_init_alias(&ram_memories[i], NULL, name, ram,
base, bank_size);
ram_bases[i] = base;
ram_sizes[i] = bank_size;
base += bank_size;
size_left -= bank_size;
break;
}
}
}
return ram_size;
}
+1 -2
View File
@@ -417,8 +417,7 @@ static void ppc_prep_init(MachineState *machine)
}
/* allocate RAM */
memory_region_init_ram(ram, NULL, "ppc_prep.ram", ram_size);
vmstate_register_ram_global(ram);
memory_region_allocate_system_memory(ram, NULL, "ppc_prep.ram", ram_size);
memory_region_add_subregion(sysmem, 0, ram);
if (linux_boot) {
+12 -7
View File
@@ -1223,6 +1223,8 @@ static void ppc_spapr_init(MachineState *machine)
int i;
MemoryRegion *sysmem = get_system_memory();
MemoryRegion *ram = g_new(MemoryRegion, 1);
MemoryRegion *rma_region;
void *rma = NULL;
hwaddr rma_alloc_size;
hwaddr node0_size = (nb_numa_nodes > 1) ? numa_info[0].node_mem : ram_size;
uint32_t initrd_base = 0;
@@ -1239,7 +1241,7 @@ static void ppc_spapr_init(MachineState *machine)
cpu_ppc_hypercall = emulate_spapr_hypercall;
/* Allocate RMA if necessary */
rma_alloc_size = kvmppc_alloc_rma("ppc_spapr.rma", sysmem);
rma_alloc_size = kvmppc_alloc_rma(&rma);
if (rma_alloc_size == -1) {
hw_error("qemu: Unable to create RMA\n");
@@ -1333,13 +1335,16 @@ static void ppc_spapr_init(MachineState *machine)
/* allocate RAM */
spapr->ram_limit = ram_size;
if (spapr->ram_limit > rma_alloc_size) {
ram_addr_t nonrma_base = rma_alloc_size;
ram_addr_t nonrma_size = spapr->ram_limit - rma_alloc_size;
memory_region_allocate_system_memory(ram, NULL, "ppc_spapr.ram",
spapr->ram_limit);
memory_region_add_subregion(sysmem, 0, ram);
memory_region_init_ram(ram, NULL, "ppc_spapr.ram", nonrma_size);
vmstate_register_ram_global(ram);
memory_region_add_subregion(sysmem, nonrma_base, ram);
if (rma_alloc_size && rma) {
rma_region = g_new(MemoryRegion, 1);
memory_region_init_ram_ptr(rma_region, NULL, "ppc_spapr.rma",
rma_alloc_size, rma);
vmstate_register_ram_global(rma_region);
memory_region_add_subregion(sysmem, 0, rma_region);
}
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, "spapr-rtas.bin");
+2 -2
View File
@@ -81,7 +81,7 @@ static IOMMUTLBEntry spapr_tce_translate_iommu(MemoryRegion *iommu, hwaddr addr)
ret.iova = addr & page_mask;
ret.translated_addr = tce & page_mask;
ret.addr_mask = ~page_mask;
ret.perm = tce;
ret.perm = tce & IOMMU_RW;
}
trace_spapr_iommu_xlate(tcet->liobn, addr, ret.iova, ret.perm,
ret.addr_mask);
@@ -223,7 +223,7 @@ static target_ulong put_tce_emu(sPAPRTCETable *tcet, target_ulong ioba,
entry.iova = ioba & page_mask;
entry.translated_addr = tce & page_mask;
entry.addr_mask = ~page_mask;
entry.perm = tce;
entry.perm = tce & IOMMU_RW;
memory_region_notify_iommu(&tcet->iommu, entry);
return H_SUCCESS;
+1 -2
View File
@@ -222,8 +222,7 @@ static void virtex_init(MachineState *machine)
env = &cpu->env;
qemu_register_reset(main_cpu_reset, cpu);
memory_region_init_ram(phys_ram, NULL, "ram", ram_size);
vmstate_register_ram_global(phys_ram);
memory_region_allocate_system_memory(phys_ram, NULL, "ram", ram_size);
memory_region_add_subregion(address_space_mem, ram_base, phys_ram);
dinfo = drive_get(IF_PFLASH, 0, 0);
+2 -1
View File
@@ -177,7 +177,8 @@ static int scsi_qdev_init(DeviceState *qdev)
d = scsi_device_find(bus, dev->channel, dev->id, dev->lun);
assert(d);
if (d->lun == dev->lun && dev != d) {
object_unparent(OBJECT(d));
error_report("lun already used by '%s'", d->qdev.id);
goto err;
}
}
+1 -1
View File
@@ -238,6 +238,7 @@ static void vhost_scsi_realize(DeviceState *dev, Error **errp)
s->dev.nvqs = VHOST_SCSI_VQ_NUM_FIXED + vs->conf.num_queues;
s->dev.vqs = g_new(struct vhost_virtqueue, s->dev.nvqs);
s->dev.vq_index = 0;
s->dev.backend_features = 0;
ret = vhost_dev_init(&s->dev, (void *)(uintptr_t)vhostfd,
VHOST_BACKEND_TYPE_KERNEL, true);
@@ -246,7 +247,6 @@ static void vhost_scsi_realize(DeviceState *dev, Error **errp)
strerror(-ret));
return;
}
s->dev.backend_features = 0;
error_setg(&s->migration_blocker,
"vhost-scsi does not support migration");
+1 -1
View File
@@ -895,7 +895,7 @@ static void rtc_realizefn(DeviceState *dev, Error **errp)
check_update_timer(s);
s->clock_reset_notifier.notify = rtc_notify_clock_reset;
qemu_clock_register_reset_notifier(QEMU_CLOCK_REALTIME,
qemu_clock_register_reset_notifier(rtc_clock,
&s->clock_reset_notifier);
s->suspend_notifier.notify = rtc_notify_suspend;
+5 -1
View File
@@ -145,6 +145,7 @@ enum {
STR_MANUFACTURER = 1,
STR_PRODUCT,
STR_SERIALNUMBER,
STR_MTP,
STR_CONFIG_FULL,
STR_CONFIG_HIGH,
STR_CONFIG_SUPER,
@@ -154,6 +155,7 @@ static const USBDescStrings desc_strings = {
[STR_MANUFACTURER] = MTP_MANUFACTURER,
[STR_PRODUCT] = MTP_PRODUCT,
[STR_SERIALNUMBER] = "34617",
[STR_MTP] = "MTP",
[STR_CONFIG_FULL] = "Full speed config (usb 1.1)",
[STR_CONFIG_HIGH] = "High speed config (usb 2.0)",
[STR_CONFIG_SUPER] = "Super speed config (usb 3.0)",
@@ -165,6 +167,7 @@ static const USBDescIface desc_iface_full = {
.bInterfaceClass = USB_CLASS_STILL_IMAGE,
.bInterfaceSubClass = 0x01,
.bInterfaceProtocol = 0x01,
.iInterface = STR_MTP,
.eps = (USBDescEndpoint[]) {
{
.bEndpointAddress = USB_DIR_IN | EP_DATA_IN,
@@ -206,6 +209,7 @@ static const USBDescIface desc_iface_high = {
.bInterfaceClass = USB_CLASS_STILL_IMAGE,
.bInterfaceSubClass = 0x01,
.bInterfaceProtocol = 0x01,
.iInterface = STR_MTP,
.eps = (USBDescEndpoint[]) {
{
.bEndpointAddress = USB_DIR_IN | EP_DATA_IN,
@@ -1086,7 +1090,7 @@ static const VMStateDescription vmstate_usb_mtp = {
};
static Property mtp_properties[] = {
DEFINE_PROP_STRING("root", MTPState, root),
DEFINE_PROP_STRING("x-root", MTPState, root),
DEFINE_PROP_STRING("desc", MTPState, desc),
DEFINE_PROP_END_OF_LIST(),
};
+1 -1
View File
@@ -2021,7 +2021,7 @@ static const VMStateDescription vmstate_ohci_eof_timer = {
},
};
const VMStateDescription vmstate_ohci_state = {
static const VMStateDescription vmstate_ohci_state = {
.name = "ohci-core",
.version_id = 1,
.minimum_version_id = 1,
+1
View File
@@ -3737,6 +3737,7 @@ static const VMStateDescription vmstate_xhci_event = {
VMSTATE_UINT32(flags, XHCIEvent),
VMSTATE_UINT8(slotid, XHCIEvent),
VMSTATE_UINT8(epid, XHCIEvent),
VMSTATE_END_OF_LIST()
}
};
+8 -14
View File
@@ -272,7 +272,7 @@ static int get_indirect(Vring *vring, VirtQueueElement *elem,
return 0;
}
void vring_free_element(VirtQueueElement *elem)
static void vring_unmap_element(VirtQueueElement *elem)
{
int i;
@@ -287,8 +287,6 @@ void vring_free_element(VirtQueueElement *elem)
for (i = 0; i < elem->in_num; i++) {
vring_unmap(elem->in_sg[i].iov_base, true);
}
g_slice_free(VirtQueueElement, elem);
}
/* This looks in the virtqueue and for the first available buffer, and converts
@@ -303,14 +301,16 @@ void vring_free_element(VirtQueueElement *elem)
* Stolen from linux/drivers/vhost/vhost.c.
*/
int vring_pop(VirtIODevice *vdev, Vring *vring,
VirtQueueElement **p_elem)
VirtQueueElement *elem)
{
struct vring_desc desc;
unsigned int i, head, found = 0, num = vring->vr.num;
uint16_t avail_idx, last_avail_idx;
VirtQueueElement *elem = NULL;
int ret;
/* Initialize elem so it can be safely unmapped */
elem->in_num = elem->out_num = 0;
/* If there was a fatal error then refuse operation */
if (vring->broken) {
ret = -EFAULT;
@@ -342,10 +342,8 @@ int vring_pop(VirtIODevice *vdev, Vring *vring,
* the index we've seen. */
head = vring->vr.avail->ring[last_avail_idx % num];
elem = g_slice_new(VirtQueueElement);
elem->index = head;
elem->in_num = elem->out_num = 0;
/* If their number is silly, that's an error. */
if (unlikely(head >= num)) {
error_report("Guest says index %u > %u is available", head, num);
@@ -393,7 +391,6 @@ int vring_pop(VirtIODevice *vdev, Vring *vring,
/* On success, increment avail index. */
vring->last_avail_idx++;
*p_elem = elem;
return head;
out:
@@ -401,10 +398,7 @@ out:
if (ret == -EFAULT) {
vring->broken = true;
}
if (elem) {
vring_free_element(elem);
}
*p_elem = NULL;
vring_unmap_element(elem);
return ret;
}
@@ -418,7 +412,7 @@ void vring_push(Vring *vring, VirtQueueElement *elem, int len)
unsigned int head = elem->index;
uint16_t new;
vring_free_element(elem);
vring_unmap_element(elem);
/* Don't touch vring if a fatal error occurred */
if (vring->broken) {
+5 -1
View File
@@ -216,7 +216,11 @@ static int vhost_user_call(struct vhost_dev *dev, unsigned long int request,
case VHOST_SET_MEM_TABLE:
for (i = 0; i < dev->mem->nregions; ++i) {
struct vhost_memory_region *reg = dev->mem->regions + i;
fd = qemu_get_ram_fd(reg->guest_phys_addr);
ram_addr_t ram_addr;
assert((uintptr_t)reg->userspace_addr == reg->userspace_addr);
qemu_ram_addr_from_host((void *)(uintptr_t)reg->userspace_addr, &ram_addr);
fd = qemu_get_ram_fd(ram_addr);
if (fd > 0) {
msg.memory.regions[fd_num].userspace_addr = reg->userspace_addr;
msg.memory.regions[fd_num].memory_size = reg->memory_size;
-2
View File
@@ -976,7 +976,6 @@ void vhost_dev_disable_notifiers(struct vhost_dev *hdev, VirtIODevice *vdev)
bool vhost_virtqueue_pending(struct vhost_dev *hdev, int n)
{
struct vhost_virtqueue *vq = hdev->vqs + n - hdev->vq_index;
assert(hdev->started);
assert(n >= hdev->vq_index && n < hdev->vq_index + hdev->nvqs);
return event_notifier_test_and_clear(&vq->masked_notifier);
}
@@ -988,7 +987,6 @@ void vhost_virtqueue_mask(struct vhost_dev *hdev, VirtIODevice *vdev, int n,
struct VirtQueue *vvq = virtio_get_queue(vdev, n);
int r, index = n - hdev->vq_index;
assert(hdev->started);
assert(n >= hdev->vq_index && n < hdev->vq_index + hdev->nvqs);
struct vhost_vring_file file = {
+7 -1
View File
@@ -181,7 +181,13 @@ static void virtio_rng_device_realize(DeviceState *dev, Error **errp)
vrng->vq = virtio_add_queue(vdev, 8, handle_input);
assert(vrng->conf.max_bytes <= INT64_MAX);
/* Workaround: Property parsing does not enforce unsigned integers,
* So this is a hack to reject such numbers. */
if (vrng->conf.max_bytes > INT64_MAX) {
error_set(errp, QERR_INVALID_PARAMETER_VALUE, "max-bytes",
"a non-negative integer below 2^63");
return;
}
vrng->quota_remaining = vrng->conf.max_bytes;
vrng->rate_limit_timer = timer_new_ms(QEMU_CLOCK_VIRTUAL,
+5 -1
View File
@@ -122,8 +122,12 @@ void watchdog_perform_action(void)
exit(0);
case WDT_PAUSE: /* same as 'stop' command in monitor */
/* In a timer callback, when vm_stop calls qemu_clock_enable
* you would get a deadlock. Bypass the problem.
*/
qemu_system_vmstop_request_prepare();
qapi_event_send_watchdog(WATCHDOG_EXPIRATION_ACTION_PAUSE, &error_abort);
vm_stop(RUN_STATE_WATCHDOG);
qemu_system_vmstop_request(RUN_STATE_WATCHDOG);
break;
case WDT_DEBUG:
+14 -18
View File
@@ -60,8 +60,14 @@ struct AioContext {
*/
int walking_handlers;
/* Used to avoid unnecessary event_notifier_set calls in aio_notify.
* Writes protected by lock or BQL, reads are lockless.
*/
bool dispatching;
/* lock to protect between bh's adders and deleter */
QemuMutex bh_lock;
/* Anchor of the list of Bottom Halves belonging to the context */
struct QEMUBH *first_bh;
@@ -83,6 +89,9 @@ struct AioContext {
QEMUTimerListGroup tlg;
};
/* Used internally to synchronize aio_poll against qemu_bh_schedule. */
void aio_set_dispatching(AioContext *ctx, bool dispatching);
/**
* aio_context_new: Allocate a new AioContext.
*
@@ -205,9 +214,9 @@ bool aio_pending(AioContext *ctx);
/* Progress in completing AIO work to occur. This can issue new pending
* aio as a result of executing I/O completion or bh callbacks.
*
* If there is no pending AIO operation or completion (bottom half),
* return false. If there are pending AIO operations of bottom halves,
* return true.
* Return whether any progress was made by executing AIO or bottom half
* handlers. If @blocking == true, this should always be true except
* if someone called aio_notify.
*
* If there are no pending bottom halves, but there are pending AIO
* operations, it may not be possible to make any progress without
@@ -220,7 +229,7 @@ bool aio_poll(AioContext *ctx, bool blocking);
#ifdef CONFIG_POSIX
/* Register a file descriptor and associated callbacks. Behaves very similarly
* to qemu_set_fd_handler2. Unlike qemu_set_fd_handler2, these callbacks will
* be invoked when using qemu_aio_wait().
* be invoked when using aio_poll().
*
* Code that invokes AIO completion functions should rely on this function
* instead of qemu_set_fd_handler[2].
@@ -234,7 +243,7 @@ void aio_set_fd_handler(AioContext *ctx,
/* Register an event notifier and associated callbacks. Behaves very similarly
* to event_notifier_set_handler. Unlike event_notifier_set_handler, these callbacks
* will be invoked when using qemu_aio_wait().
* will be invoked when using aio_poll().
*
* Code that invokes AIO completion functions should rely on this function
* instead of event_notifier_set_handler.
@@ -251,19 +260,6 @@ GSource *aio_get_g_source(AioContext *ctx);
/* Return the ThreadPool bound to this AioContext */
struct ThreadPool *aio_get_thread_pool(AioContext *ctx);
/* Functions to operate on the main QEMU AioContext. */
bool qemu_aio_wait(void);
void qemu_aio_set_event_notifier(EventNotifier *notifier,
EventNotifierHandler *io_read);
#ifdef CONFIG_POSIX
void qemu_aio_set_fd_handler(int fd,
IOHandler *io_read,
IOHandler *io_write,
void *opaque);
#endif
/**
* aio_timer_new:
* @ctx: the aio context
+1 -1
View File
@@ -278,7 +278,7 @@ int bdrv_truncate(BlockDriverState *bs, int64_t offset);
int64_t bdrv_getlength(BlockDriverState *bs);
int64_t bdrv_get_allocated_file_size(BlockDriverState *bs);
void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr);
int bdrv_refresh_limits(BlockDriverState *bs);
void bdrv_refresh_limits(BlockDriverState *bs, Error **errp);
int bdrv_commit(BlockDriverState *bs);
int bdrv_commit_all(void);
int bdrv_change_backing_file(BlockDriverState *bs,
+1 -1
View File
@@ -240,7 +240,7 @@ struct BlockDriver {
int (*bdrv_debug_resume)(BlockDriverState *bs, const char *tag);
bool (*bdrv_debug_is_suspended)(BlockDriverState *bs, const char *tag);
int (*bdrv_refresh_limits)(BlockDriverState *bs);
void (*bdrv_refresh_limits)(BlockDriverState *bs, Error **errp);
/*
* Returns 1 if newly created images are guaranteed to contain only
+2 -2
View File
@@ -74,7 +74,7 @@ struct BlockJob {
* Set to true if the job should cancel itself. The flag must
* always be tested just before toggling the busy flag from false
* to true. After a job has been cancelled, it should only yield
* if #qemu_aio_wait will ("sooner or later") reenter the coroutine.
* if #aio_poll will ("sooner or later") reenter the coroutine.
*/
bool cancelled;
@@ -87,7 +87,7 @@ struct BlockJob {
/**
* Set to false by the job while it is in a quiescent state, where
* no I/O is pending and the job has yielded on any condition
* that is not detected by #qemu_aio_wait, such as a timer.
* that is not detected by #aio_poll, such as a timer.
*/
bool busy;
+1 -1
View File
@@ -212,7 +212,7 @@ void coroutine_fn co_sleep_ns(QEMUClockType type, int64_t ns);
* Yield the coroutine for a given duration
*
* Behaves similarly to co_sleep_ns(), but the sleeping coroutine will be
* resumed when using qemu_aio_wait().
* resumed when using aio_poll().
*/
void coroutine_fn co_aio_sleep_ns(AioContext *ctx, QEMUClockType type,
int64_t ns);
+11
View File
@@ -71,6 +71,17 @@ static inline void cpu_physical_memory_set_dirty_flag(ram_addr_t addr,
set_bit(addr >> TARGET_PAGE_BITS, ram_list.dirty_memory[client]);
}
static inline void cpu_physical_memory_set_dirty_range_nocode(ram_addr_t start,
ram_addr_t length)
{
unsigned long end, page;
end = TARGET_PAGE_ALIGN(start + length) >> TARGET_PAGE_BITS;
page = start >> TARGET_PAGE_BITS;
bitmap_set(ram_list.dirty_memory[DIRTY_MEMORY_MIGRATION], page, end - page);
bitmap_set(ram_list.dirty_memory[DIRTY_MEMORY_VGA], page, end - page);
}
static inline void cpu_physical_memory_set_dirty_range(ram_addr_t start,
ram_addr_t length)
{
+1 -1
View File
@@ -32,7 +32,7 @@
#define ACPI_MEMORY_HOTPLUG_IO_LEN 24
#define ACPI_MEMORY_HOTPLUG_BASE 0x0a00
#define MEMORY_HOPTLUG_DEVICE MHPD
#define MEMORY_HOTPLUG_DEVICE MHPD
#define MEMORY_SLOTS_NUMBER MDNR
#define MEMORY_HOTPLUG_IO_REGION HPMR
#define MEMORY_SLOT_ADDR_LOW MRBL
+3
View File
@@ -94,6 +94,7 @@ struct PcGuestInfo {
uint64_t *node_mem;
uint64_t *node_cpu;
FWCfgState *fw_cfg;
int legacy_acpi_table_size;
bool has_acpi_build;
bool has_reserved_memory;
};
@@ -176,6 +177,8 @@ void pc_acpi_init(const char *default_dsdt);
PcGuestInfo *pc_guest_info_init(ram_addr_t below_4g_mem_size,
ram_addr_t above_4g_mem_size);
void pc_set_legacy_acpi_data_size(void);
#define PCI_HOST_PROP_PCI_HOLE_START "pci-hole-start"
#define PCI_HOST_PROP_PCI_HOLE_END "pci-hole-end"
#define PCI_HOST_PROP_PCI_HOLE64_START "pci-hole64-start"
+1 -2
View File
@@ -53,8 +53,7 @@ void vring_teardown(Vring *vring, VirtIODevice *vdev, int n);
void vring_disable_notification(VirtIODevice *vdev, Vring *vring);
bool vring_enable_notification(VirtIODevice *vdev, Vring *vring);
bool vring_should_notify(VirtIODevice *vdev, Vring *vring);
int vring_pop(VirtIODevice *vdev, Vring *vring, VirtQueueElement **elem);
int vring_pop(VirtIODevice *vdev, Vring *vring, VirtQueueElement *elem);
void vring_push(Vring *vring, VirtQueueElement *elem, int len);
void vring_free_element(VirtQueueElement *elem);
#endif /* VRING_H */
+5 -1
View File
@@ -144,7 +144,7 @@ typedef struct MultiReqBuffer {
typedef struct VirtIOBlockReq {
VirtIOBlock *dev;
VirtQueueElement *elem;
VirtQueueElement elem;
struct virtio_blk_inhdr *in;
struct virtio_blk_outhdr out;
QEMUIOVector qiov;
@@ -152,6 +152,10 @@ typedef struct VirtIOBlockReq {
BlockAcctCookie acct;
} VirtIOBlockReq;
VirtIOBlockReq *virtio_blk_alloc_request(VirtIOBlock *s);
void virtio_blk_free_request(VirtIOBlockReq *req);
int virtio_blk_handle_scsi_req(VirtIOBlock *blk,
VirtQueueElement *elem);
+2
View File
@@ -178,6 +178,8 @@ typedef struct {
DEFINE_PROP_UINT32("cmd_per_lun", _state, _conf_field.cmd_per_lun, 128)
#define DEFINE_VIRTIO_SCSI_FEATURES(_state, _feature_field) \
DEFINE_PROP_BIT("any_layout", _state, _feature_field, \
VIRTIO_F_ANY_LAYOUT, true), \
DEFINE_PROP_BIT("hotplug", _state, _feature_field, VIRTIO_SCSI_F_HOTPLUG, \
true), \
DEFINE_PROP_BIT("param_change", _state, _feature_field, \
+1 -1
View File
@@ -153,7 +153,7 @@
/* ---------------------------------------------------------------- */
/* Definitions for arbitary-precision modules (only valid after */
/* Definitions for arbitrary-precision modules (only valid after */
/* decNumber.h has been included) */
/* ---------------------------------------------------------------- */
+1
View File
@@ -329,6 +329,7 @@ size_t qemu_iovec_memset(QEMUIOVector *qiov, size_t offset,
int fillc, size_t bytes);
ssize_t qemu_iovec_compare(QEMUIOVector *a, QEMUIOVector *b);
void qemu_iovec_clone(QEMUIOVector *dest, const QEMUIOVector *src, void *buf);
void qemu_iovec_discard_back(QEMUIOVector *qiov, size_t bytes);
bool buffer_is_zero(const void *buf, size_t len);
+4 -1
View File
@@ -30,6 +30,7 @@ typedef ObjectClass IOThreadClass;
static void *iothread_run(void *opaque)
{
IOThread *iothread = opaque;
bool blocking;
qemu_mutex_lock(&iothread->init_done_lock);
iothread->thread_id = qemu_get_thread_id();
@@ -38,8 +39,10 @@ static void *iothread_run(void *opaque)
while (!iothread->stopping) {
aio_context_acquire(iothread->ctx);
while (!iothread->stopping && aio_poll(iothread->ctx, true)) {
blocking = true;
while (!iothread->stopping && aio_poll(iothread->ctx, blocking)) {
/* Progress was made, keep going */
blocking = false;
}
aio_context_release(iothread->ctx);
}
+3 -2
View File
@@ -2077,12 +2077,13 @@ void kvm_remove_all_breakpoints(CPUState *cpu)
{
struct kvm_sw_breakpoint *bp, *next;
KVMState *s = cpu->kvm_state;
CPUState *tmpcpu;
QTAILQ_FOREACH_SAFE(bp, &s->kvm_sw_breakpoints, entry, next) {
if (kvm_arch_remove_sw_breakpoint(cpu, bp) != 0) {
/* Try harder to find a CPU that currently sees the breakpoint. */
CPU_FOREACH(cpu) {
if (kvm_arch_remove_sw_breakpoint(cpu, bp) == 0) {
CPU_FOREACH(tmpcpu) {
if (kvm_arch_remove_sw_breakpoint(tmpcpu, bp) == 0) {
break;
}
}
+1 -1
View File
@@ -118,7 +118,7 @@
IOCTL(SIOCSIFMEM, IOC_W, MK_PTR(MK_STRUCT(STRUCT_ptr_ifreq)))
IOCTL(SIOCADDMULTI, IOC_W, MK_PTR(MK_STRUCT(STRUCT_sockaddr_ifreq)))
IOCTL(SIOCDELMULTI, IOC_W, MK_PTR(MK_STRUCT(STRUCT_sockaddr_ifreq)))
IOCTL(SIOCGIFINDEX, IOC_W | IOC_R, MK_PTR(MK_STRUCT(STRUCT_sockaddr_ifreq)))
IOCTL(SIOCGIFINDEX, IOC_W | IOC_R, MK_PTR(MK_STRUCT(STRUCT_int_ifreq)))
IOCTL(SIOCSIFLINK, 0, TYPE_NULL)
IOCTL_SPECIAL(SIOCGIFCONF, IOC_W | IOC_R, do_ioctl_ifconf,
MK_PTR(MK_STRUCT(STRUCT_ifconf)))
+4 -3
View File
@@ -1305,7 +1305,7 @@ static abi_ulong get_sigframe(struct target_sigaction *ka, CPUARMState *env)
/*
* This is the X/Open sanctioned signal stack switching.
*/
if ((ka->sa_flags & SA_ONSTACK) && !sas_ss_flags(sp)) {
if ((ka->sa_flags & TARGET_SA_ONSTACK) && !sas_ss_flags(sp)) {
sp = target_sigaltstack_used.ss_sp + target_sigaltstack_used.ss_size;
}
@@ -3509,8 +3509,9 @@ static abi_ulong get_sigframe(struct target_sigaction *ka,
{
abi_ulong sp = env->regs[1];
if ((ka->sa_flags & SA_ONSTACK) != 0 && !on_sig_stack(sp))
if ((ka->sa_flags & TARGET_SA_ONSTACK) != 0 && !on_sig_stack(sp)) {
sp = target_sigaltstack_used.ss_sp + target_sigaltstack_used.ss_size;
}
return ((sp - frame_size) & -8UL);
}
@@ -3891,7 +3892,7 @@ static inline abi_ulong get_sigframe(struct target_sigaction *ka,
/* redzone */
/* This is the X/Open sanctioned signal stack switching. */
if ((ka->sa_flags & SA_ONSTACK) != 0 && !onsigstack) {
if ((ka->sa_flags & TARGET_SA_ONSTACK) != 0 && !onsigstack) {
sp = target_sigaltstack_used.ss_sp + target_sigaltstack_used.ss_size;
}
+29 -3
View File
@@ -1140,6 +1140,13 @@ static inline abi_long target_to_host_sockaddr(struct sockaddr *addr,
memcpy(addr, target_saddr, len);
addr->sa_family = sa_family;
if (sa_family == AF_PACKET) {
struct target_sockaddr_ll *lladdr;
lladdr = (struct target_sockaddr_ll *)addr;
lladdr->sll_ifindex = tswap32(lladdr->sll_ifindex);
lladdr->sll_hatype = tswap16(lladdr->sll_hatype);
}
unlock_user(target_saddr, target_addr, 0);
return 0;
@@ -1497,6 +1504,25 @@ set_timeout:
unlock_user_struct(tfprog, optval_addr, 1);
return ret;
}
case TARGET_SO_BINDTODEVICE:
{
char *dev_ifname, *addr_ifname;
if (optlen > IFNAMSIZ - 1) {
optlen = IFNAMSIZ - 1;
}
dev_ifname = lock_user(VERIFY_READ, optval_addr, optlen, 1);
if (!dev_ifname) {
return -TARGET_EFAULT;
}
optname = SO_BINDTODEVICE;
addr_ifname = alloca(IFNAMSIZ);
memcpy(addr_ifname, dev_ifname, optlen);
addr_ifname[optlen] = 0;
ret = get_errno(setsockopt(sockfd, level, optname, addr_ifname, optlen));
unlock_user (dev_ifname, optval_addr, 0);
return ret;
}
/* Options with 'int' argument. */
case TARGET_SO_DEBUG:
optname = SO_DEBUG;
@@ -1958,7 +1984,7 @@ static abi_long do_connect(int sockfd, abi_ulong target_addr,
return -TARGET_EINVAL;
}
addr = alloca(addrlen);
addr = alloca(addrlen+1);
ret = target_to_host_sockaddr(addr, target_addr, addrlen);
if (ret)
@@ -1979,7 +2005,7 @@ static abi_long do_sendrecvmsg_locked(int fd, struct target_msghdr *msgp,
if (msgp->msg_name) {
msg.msg_namelen = tswap32(msgp->msg_namelen);
msg.msg_name = alloca(msg.msg_namelen);
msg.msg_name = alloca(msg.msg_namelen+1);
ret = target_to_host_sockaddr(msg.msg_name, tswapal(msgp->msg_name),
msg.msg_namelen);
if (ret) {
@@ -2242,7 +2268,7 @@ static abi_long do_sendto(int fd, abi_ulong msg, size_t len, int flags,
if (!host_msg)
return -TARGET_EFAULT;
if (target_addr) {
addr = alloca(addrlen);
addr = alloca(addrlen+1);
ret = target_to_host_sockaddr(addr, target_addr, addrlen);
if (ret) {
unlock_user(host_msg, msg, 0);
+10
View File
@@ -121,6 +121,16 @@ struct target_sockaddr {
uint8_t sa_data[14];
};
struct target_sockaddr_ll {
uint16_t sll_family; /* Always AF_PACKET */
uint16_t sll_protocol; /* Physical layer protocol */
int sll_ifindex; /* Interface number */
uint16_t sll_hatype; /* ARP hardware type */
uint8_t sll_pkttype; /* Packet type */
uint8_t sll_halen; /* Length of address */
uint8_t sll_addr[8]; /* Physical layer address */
};
struct target_sock_filter {
abi_ushort code;
uint8_t jt;
Loaded 100 of 167 files, more files were not shown because too many files have changed in this diff. Show more