Update version for 1.2.0

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

VERSION

@@ -1 +1 @@
-1.1.92
+1.2.0

block/qed.c

@@ -1363,10 +1363,21 @@ static int coroutine_fn bdrv_qed_co_write_zeroes(BlockDriverState *bs,
                                                  int nb_sectors)
 {
     BlockDriverAIOCB *blockacb;
+    BDRVQEDState *s = bs->opaque;
     QEDWriteZeroesCB cb = { .done = false };
     QEMUIOVector qiov;
     struct iovec iov;
 
+    /* Refuse if there are untouched backing file sectors */
+    if (bs->backing_hd) {
+        if (qed_offset_into_cluster(s, sector_num * BDRV_SECTOR_SIZE) != 0) {
+            return -ENOTSUP;
+        }
+        if (qed_offset_into_cluster(s, nb_sectors * BDRV_SECTOR_SIZE) != 0) {
+            return -ENOTSUP;
+        }
+    }
+
     /* Zero writes start without an I/O buffer.  If a buffer becomes necessary
      * then it will be allocated during request processing.
      */

block/stream.c

@@ -122,6 +122,12 @@ wait:
              * known-unallocated area [sector_num, sector_num+n).  */
             ret = bdrv_co_is_allocated_above(bs->backing_hd, base,
                                              sector_num, n, &n);
+
+            /* Finish early if end of backing file has been reached */
+            if (ret == 0 && n == 0) {
+                n = end - sector_num;
+            }
+
             copy = (ret == 1);
         }
         trace_stream_one_iteration(s, sector_num, n, ret);

console.c

@@ -850,6 +850,26 @@ static void console_clear_xy(TextConsole *s, int x, int y)
     update_xy(s, x, y);
 }
 
+/* set cursor, checking bounds */
+static void set_cursor(TextConsole *s, int x, int y)
+{
+    if (x < 0) {
+        x = 0;
+    }
+    if (y < 0) {
+        y = 0;
+    }
+    if (y >= s->height) {
+        y = s->height - 1;
+    }
+    if (x >= s->width) {
+        x = s->width - 1;
+    }
+
+    s->x = x;
+    s->y = y;
+}
+
 static void console_putchar(TextConsole *s, int ch)
 {
     TextCell *c;
@@ -921,7 +941,8 @@ static void console_putchar(TextConsole *s, int ch)
                     s->esc_params[s->nb_esc_params] * 10 + ch - '0';
             }
         } else {
-            s->nb_esc_params++;
+            if (s->nb_esc_params < MAX_ESC_PARAMS)
+                s->nb_esc_params++;
             if (ch == ';')
                 break;
 #ifdef DEBUG_CONSOLE
@@ -935,59 +956,37 @@ static void console_putchar(TextConsole *s, int ch)
                 if (s->esc_params[0] == 0) {
                     s->esc_params[0] = 1;
                 }
-                s->y -= s->esc_params[0];
-                if (s->y < 0) {
-                    s->y = 0;
-                }
+                set_cursor(s, s->x, s->y - s->esc_params[0]);
                 break;
             case 'B':
                 /* move cursor down */
                 if (s->esc_params[0] == 0) {
                     s->esc_params[0] = 1;
                 }
-                s->y += s->esc_params[0];
-                if (s->y >= s->height) {
-                    s->y = s->height - 1;
-                }
+                set_cursor(s, s->x, s->y + s->esc_params[0]);
                 break;
             case 'C':
                 /* move cursor right */
                 if (s->esc_params[0] == 0) {
                     s->esc_params[0] = 1;
                 }
-                s->x += s->esc_params[0];
-                if (s->x >= s->width) {
-                    s->x = s->width - 1;
-                }
+                set_cursor(s, s->x + s->esc_params[0], s->y);
                 break;
             case 'D':
                 /* move cursor left */
                 if (s->esc_params[0] == 0) {
                     s->esc_params[0] = 1;
                 }
-                s->x -= s->esc_params[0];
-                if (s->x < 0) {
-                    s->x = 0;
-                }
+                set_cursor(s, s->x - s->esc_params[0], s->y);
                 break;
             case 'G':
                 /* move cursor to column */
-                s->x = s->esc_params[0] - 1;
-                if (s->x < 0) {
-                    s->x = 0;
-                }
+                set_cursor(s, s->esc_params[0] - 1, s->y);
                 break;
             case 'f':
             case 'H':
                 /* move cursor to row, column */
-                s->x = s->esc_params[1] - 1;
-                if (s->x < 0) {
-                    s->x = 0;
-                }
-                s->y = s->esc_params[0] - 1;
-                if (s->y < 0) {
-                    s->y = 0;
-                }
+                set_cursor(s, s->esc_params[1] - 1, s->esc_params[0] - 1);
                 break;
             case 'J':
                 switch (s->esc_params[0]) {
@@ -1087,7 +1086,7 @@ void console_select(unsigned int index)
     if (s) {
         DisplayState *ds = s->ds;
 
-        if (active_console->cursor_timer) {
+        if (active_console && active_console->cursor_timer) {
             qemu_del_timer(active_console->cursor_timer);
         }
         active_console = s;

hw/qdev-monitor.c

@@ -543,7 +543,7 @@ static void qdev_print(Monitor *mon, DeviceState *dev, int indent)
         qdev_print_props(mon, dev, DEVICE_CLASS(class)->props, indent);
         class = object_class_get_parent(class);
     } while (class != object_class_by_name(TYPE_DEVICE));
-    bus_print_dev(dev->parent_bus, mon, dev, indent + 2);
+    bus_print_dev(dev->parent_bus, mon, dev, indent);
     QLIST_FOREACH(child, &dev->child_bus, sibling) {
         qbus_print(mon, child, indent);
     }

hw/usb.h

@@ -179,6 +179,7 @@ struct USBEndpoint {
     uint8_t ifnum;
     int max_packet_size;
     bool pipeline;
+    bool halted;
     USBDevice *dev;
     QTAILQ_HEAD(, USBPacket) queue;
 };
@@ -331,6 +332,7 @@ typedef enum USBPacketState {
 struct USBPacket {
     /* Data fields for use by the driver.  */
     int pid;
+    uint64_t id;
     USBEndpoint *ep;
     QEMUIOVector iov;
     uint64_t parameter; /* control transfers */
@@ -343,7 +345,7 @@ struct USBPacket {
 void usb_packet_init(USBPacket *p);
 void usb_packet_set_state(USBPacket *p, USBPacketState state);
 void usb_packet_check_state(USBPacket *p, USBPacketState expected);
-void usb_packet_setup(USBPacket *p, int pid, USBEndpoint *ep);
+void usb_packet_setup(USBPacket *p, int pid, USBEndpoint *ep, uint64_t id);
 void usb_packet_addbuf(USBPacket *p, void *ptr, size_t len);
 int usb_packet_map(USBPacket *p, QEMUSGList *sgl);
 void usb_packet_unmap(USBPacket *p, QEMUSGList *sgl);

hw/usb/core.c

@@ -382,12 +382,23 @@ int usb_handle_packet(USBDevice *dev, USBPacket *p)
     usb_packet_check_state(p, USB_PACKET_SETUP);
     assert(p->ep != NULL);
 
+    /* Submitting a new packet clears halt */
+    if (p->ep->halted) {
+        assert(QTAILQ_EMPTY(&p->ep->queue));
+        p->ep->halted = false;
+    }
+
     if (QTAILQ_EMPTY(&p->ep->queue) || p->ep->pipeline) {
         ret = usb_process_one(p);
         if (ret == USB_RET_ASYNC) {
             usb_packet_set_state(p, USB_PACKET_ASYNC);
             QTAILQ_INSERT_TAIL(&p->ep->queue, p, queue);
         } else {
+            /*
+             * When pipelining is enabled usb-devices must always return async,
+             * otherwise packets can complete out of order!
+             */
+            assert(!p->ep->pipeline);
             p->result = ret;
             usb_packet_set_state(p, USB_PACKET_COMPLETE);
         }
@@ -399,6 +410,20 @@ int usb_handle_packet(USBDevice *dev, USBPacket *p)
     return ret;
 }
 
+static void __usb_packet_complete(USBDevice *dev, USBPacket *p)
+{
+    USBEndpoint *ep = p->ep;
+
+    assert(p->result != USB_RET_ASYNC && p->result != USB_RET_NAK);
+
+    if (p->result < 0) {
+        ep->halted = true;
+    }
+    usb_packet_set_state(p, USB_PACKET_COMPLETE);
+    QTAILQ_REMOVE(&ep->queue, p, queue);
+    dev->port->ops->complete(dev->port, p);
+}
+
 /* Notify the controller that an async packet is complete.  This should only
    be called for packets previously deferred by returning USB_RET_ASYNC from
    handle_packet. */
@@ -409,11 +434,9 @@ void usb_packet_complete(USBDevice *dev, USBPacket *p)
 
     usb_packet_check_state(p, USB_PACKET_ASYNC);
     assert(QTAILQ_FIRST(&ep->queue) == p);
-    usb_packet_set_state(p, USB_PACKET_COMPLETE);
-    QTAILQ_REMOVE(&ep->queue, p, queue);
-    dev->port->ops->complete(dev->port, p);
+    __usb_packet_complete(dev, p);
 
-    while (!QTAILQ_EMPTY(&ep->queue)) {
+    while (!ep->halted && !QTAILQ_EMPTY(&ep->queue)) {
         p = QTAILQ_FIRST(&ep->queue);
         if (p->state == USB_PACKET_ASYNC) {
             break;
@@ -425,9 +448,7 @@ void usb_packet_complete(USBDevice *dev, USBPacket *p)
             break;
         }
         p->result = ret;
-        usb_packet_set_state(p, USB_PACKET_COMPLETE);
-        QTAILQ_REMOVE(&ep->queue, p, queue);
-        dev->port->ops->complete(dev->port, p);
+        __usb_packet_complete(ep->dev, p);
     }
 }
 
@@ -499,10 +520,11 @@ void usb_packet_set_state(USBPacket *p, USBPacketState state)
     p->state = state;
 }
 
-void usb_packet_setup(USBPacket *p, int pid, USBEndpoint *ep)
+void usb_packet_setup(USBPacket *p, int pid, USBEndpoint *ep, uint64_t id)
 {
     assert(!usb_packet_is_inflight(p));
     assert(p->iov.iov != NULL);
+    p->id = id;
     p->pid = pid;
     p->ep = ep;
     p->result = 0;

hw/usb/dev-uas.c

@@ -424,6 +424,7 @@ static void usb_uas_scsi_free_request(SCSIBus *bus, void *priv)
     }
     QTAILQ_REMOVE(&uas->requests, req, next);
     g_free(req);
+    usb_uas_start_next_transfer(uas);
 }
 
 static UASRequest *usb_uas_find_request(UASDevice *uas, uint16_t tag)
@@ -456,7 +457,6 @@ static void usb_uas_scsi_command_complete(SCSIRequest *r,
                                           uint32_t status, size_t resid)
 {
     UASRequest *req = r->hba_private;
-    UASDevice *uas = req->uas;
 
     trace_usb_uas_scsi_complete(req->uas->dev.addr, req->tag, status, resid);
     req->complete = true;
@@ -465,7 +465,6 @@ static void usb_uas_scsi_command_complete(SCSIRequest *r,
     }
     usb_uas_queue_sense(req, status);
     scsi_req_unref(req->req);
-    usb_uas_start_next_transfer(uas);
 }
 
 static void usb_uas_scsi_request_cancelled(SCSIRequest *r)

hw/usb/hcd-ehci.c

@@ -766,15 +766,27 @@ static EHCIQueue *ehci_alloc_queue(EHCIState *ehci, uint32_t addr, int async)
     return q;
 }
 
+static void ehci_cancel_queue(EHCIQueue *q)
+{
+    EHCIPacket *p;
+
+    p = QTAILQ_FIRST(&q->packets);
+    if (p == NULL) {
+        return;
+    }
+
+    trace_usb_ehci_queue_action(q, "cancel");
+    do {
+        ehci_free_packet(p);
+    } while ((p = QTAILQ_FIRST(&q->packets)) != NULL);
+}
+
 static void ehci_free_queue(EHCIQueue *q)
 {
     EHCIQueueHead *head = q->async ? &q->ehci->aqueues : &q->ehci->pqueues;
-    EHCIPacket *p;
 
     trace_usb_ehci_queue_action(q, "free");
-    while ((p = QTAILQ_FIRST(&q->packets)) != NULL) {
-        ehci_free_packet(p);
-    }
+    ehci_cancel_queue(q);
     QTAILQ_REMOVE(head, q, next);
     g_free(q);
 }
@@ -1194,6 +1206,15 @@ static void ehci_mem_writel(void *ptr, target_phys_addr_t addr, uint32_t val)
             val &= ~USBCMD_FLS;
         }
 
+        if (val & USBCMD_IAAD) {
+            /*
+             * Process IAAD immediately, otherwise the Linux IAAD watchdog may
+             * trigger and re-use a qh without us seeing the unlink.
+             */
+            s->async_stepdown = 0;
+            qemu_bh_schedule(s->async_bh);
+        }
+
         if (((USBCMD_RUNSTOP | USBCMD_PSE | USBCMD_ASE) & val) !=
             ((USBCMD_RUNSTOP | USBCMD_PSE | USBCMD_ASE) & s->usbcmd)) {
             if (s->pstate == EST_INACTIVE) {
@@ -1530,7 +1551,7 @@ static int ehci_execute(EHCIPacket *p, const char *action)
     endp = get_field(p->queue->qh.epchar, QH_EPCHAR_EP);
     ep = usb_ep_get(p->queue->dev, p->pid, endp);
 
-    usb_packet_setup(&p->packet, p->pid, ep);
+    usb_packet_setup(&p->packet, p->pid, ep, p->qtdaddr);
     usb_packet_map(&p->packet, &p->sgl);
 
     trace_usb_ehci_packet_action(p->queue, p, action);
@@ -1552,7 +1573,8 @@ static int ehci_execute(EHCIPacket *p, const char *action)
  */
 
 static int ehci_process_itd(EHCIState *ehci,
-                            EHCIitd *itd)
+                            EHCIitd *itd,
+                            uint32_t addr)
 {
     USBDevice *dev;
     USBEndpoint *ep;
@@ -1597,8 +1619,8 @@ static int ehci_process_itd(EHCIState *ehci,
 
             dev = ehci_find_device(ehci, devaddr);
             ep = usb_ep_get(dev, pid, endp);
-            if (ep->type == USB_ENDPOINT_XFER_ISOC) {
-                usb_packet_setup(&ehci->ipacket, pid, ep);
+            if (ep && ep->type == USB_ENDPOINT_XFER_ISOC) {
+                usb_packet_setup(&ehci->ipacket, pid, ep, addr);
                 usb_packet_map(&ehci->ipacket, &ehci->isgl);
                 ret = usb_handle_packet(dev, &ehci->ipacket);
                 assert(ret != USB_RET_ASYNC);
@@ -1786,9 +1808,7 @@ static EHCIQueue *ehci_state_fetchqh(EHCIState *ehci, int async)
     if (q->dev != NULL && q->dev->addr != devaddr) {
         if (!QTAILQ_EMPTY(&q->packets)) {
             /* should not happen (guest bug) */
-            while ((p = QTAILQ_FIRST(&q->packets)) != NULL) {
-                ehci_free_packet(p);
-            }
+            ehci_cancel_queue(q);
         }
         q->dev = NULL;
     }
@@ -1796,11 +1816,6 @@ static EHCIQueue *ehci_state_fetchqh(EHCIState *ehci, int async)
         q->dev = ehci_find_device(q->ehci, devaddr);
     }
 
-    if (p && p->async == EHCI_ASYNC_INFLIGHT) {
-        /* I/O still in progress -- skip queue */
-        ehci_set_state(ehci, async, EST_HORIZONTALQH);
-        goto out;
-    }
     if (p && p->async == EHCI_ASYNC_FINISHED) {
         /* I/O finished -- continue processing queue */
         trace_usb_ehci_packet_action(p->queue, p, "complete");
@@ -1862,7 +1877,7 @@ static int ehci_state_fetchitd(EHCIState *ehci, int async)
                sizeof(EHCIitd) >> 2);
     ehci_trace_itd(ehci, entry, &itd);
 
-    if (ehci_process_itd(ehci, &itd) != 0) {
+    if (ehci_process_itd(ehci, &itd, entry) != 0) {
         return -1;
     }
 
@@ -1949,29 +1964,50 @@ static int ehci_state_fetchqtd(EHCIQueue *q)
     ehci_trace_qtd(q, NLPTR_GET(q->qtdaddr), &qtd);
 
     p = QTAILQ_FIRST(&q->packets);
-    while (p != NULL && p->qtdaddr != q->qtdaddr) {
-        /* should not happen (guest bug) */
-        ehci_free_packet(p);
-        p = QTAILQ_FIRST(&q->packets);
-    }
     if (p != NULL) {
-        ehci_qh_do_overlay(q);
-        ehci_flush_qh(q);
-        if (p->async == EHCI_ASYNC_INFLIGHT) {
-            ehci_set_state(q->ehci, q->async, EST_HORIZONTALQH);
+        if (p->qtdaddr != q->qtdaddr ||
+            (!NLPTR_TBIT(p->qtd.next) && (p->qtd.next != qtd.next)) ||
+            (!NLPTR_TBIT(p->qtd.altnext) && (p->qtd.altnext != qtd.altnext)) ||
+            p->qtd.bufptr[0] != qtd.bufptr[0]) {
+            /* guest bug: guest updated active QH or qTD underneath us */
+            ehci_cancel_queue(q);
+            p = NULL;
         } else {
+            p->qtd = qtd;
+            ehci_qh_do_overlay(q);
+        }
+    }
+
+    if (!(qtd.token & QTD_TOKEN_ACTIVE)) {
+        if (p != NULL) {
+            /* transfer canceled by guest (clear active) */
+            ehci_cancel_queue(q);
+            p = NULL;
+        }
+        ehci_set_state(q->ehci, q->async, EST_HORIZONTALQH);
+        again = 1;
+    } else if (p != NULL) {
+        switch (p->async) {
+        case EHCI_ASYNC_NONE:
+            /* Previously nacked packet (likely interrupt ep) */
+           ehci_set_state(q->ehci, q->async, EST_EXECUTE);
+           break;
+        case EHCI_ASYNC_INFLIGHT:
+            /* Unfinyshed async handled packet, go horizontal */
+            ehci_set_state(q->ehci, q->async, EST_HORIZONTALQH);
+            break;
+        case EHCI_ASYNC_FINISHED:
+            /* Should never happen, as this case is caught by fetchqh */
             ehci_set_state(q->ehci, q->async, EST_EXECUTING);
+            break;
         }
         again = 1;
-    } else if (qtd.token & QTD_TOKEN_ACTIVE) {
+    } else {
         p = ehci_alloc_packet(q);
         p->qtdaddr = q->qtdaddr;
         p->qtd = qtd;
         ehci_set_state(q->ehci, q->async, EST_EXECUTE);
         again = 1;
-    } else {
-        ehci_set_state(q->ehci, q->async, EST_HORIZONTALQH);
-        again = 1;
     }
 
     return again;
@@ -2075,19 +2111,11 @@ out:
 static int ehci_state_executing(EHCIQueue *q)
 {
     EHCIPacket *p = QTAILQ_FIRST(&q->packets);
-    int again = 0;
 
     assert(p != NULL);
     assert(p->qtdaddr == q->qtdaddr);
 
     ehci_execute_complete(q);
-    if (p->usb_status == USB_RET_ASYNC) {
-        goto out;
-    }
-    if (p->usb_status == USB_RET_PROCERR) {
-        again = -1;
-        goto out;
-    }
 
     // 4.10.3
     if (!q->async) {
@@ -2105,11 +2133,8 @@ static int ehci_state_executing(EHCIQueue *q)
         ehci_set_state(q->ehci, q->async, EST_WRITEBACK);
     }
 
-    again = 1;
-
-out:
     ehci_flush_qh(q);
-    return again;
+    return 1;
 }
 
 
@@ -2138,6 +2163,19 @@ static int ehci_state_writeback(EHCIQueue *q)
      * bit is clear.
      */
     if (q->qh.token & QTD_TOKEN_HALT) {
+        /*
+         * We should not do any further processing on a halted queue!
+         * This is esp. important for bulk endpoints with pipelining enabled
+         * (redirection to a real USB device), where we must cancel all the
+         * transfers after this one so that:
+         * 1) If they've completed already, they are not processed further
+         *    causing more stalls, originating from the same failed transfer
+         * 2) If still in flight, they are cancelled before the guest does
+         *    a clear stall, otherwise the guest and device can loose sync!
+         */
+        while ((p = QTAILQ_FIRST(&q->packets)) != NULL) {
+            ehci_free_packet(p);
+        }
         ehci_set_state(q->ehci, q->async, EST_HORIZONTALQH);
         again = 1;
     } else {

hw/usb/hcd-musb.c

@@ -626,7 +626,8 @@ static void musb_packet(MUSBState *s, MUSBEndPoint *ep,
     /* A wild guess on the FADDR semantics... */
     dev = usb_find_device(&s->port, ep->faddr[idx]);
     uep = usb_ep_get(dev, pid, ep->type[idx] & 0xf);
-    usb_packet_setup(&ep->packey[dir].p, pid, uep);
+    usb_packet_setup(&ep->packey[dir].p, pid, uep,
+                     (dev->addr << 16) | (uep->nr << 8) | pid);
     usb_packet_addbuf(&ep->packey[dir].p, ep->buf[idx], len);
     ep->packey[dir].ep = ep;
     ep->packey[dir].dir = dir;

hw/usb/hcd-ohci.c

@@ -812,7 +812,7 @@ static int ohci_service_iso_td(OHCIState *ohci, struct ohci_ed *ed,
     } else {
         dev = ohci_find_device(ohci, OHCI_BM(ed->flags, ED_FA));
         ep = usb_ep_get(dev, pid, OHCI_BM(ed->flags, ED_EN));
-        usb_packet_setup(&ohci->usb_packet, pid, ep);
+        usb_packet_setup(&ohci->usb_packet, pid, ep, addr);
         usb_packet_addbuf(&ohci->usb_packet, ohci->usb_buf, len);
         ret = usb_handle_packet(dev, &ohci->usb_packet);
         if (ret == USB_RET_ASYNC) {
@@ -1011,7 +1011,7 @@ static int ohci_service_td(OHCIState *ohci, struct ohci_ed *ed)
         }
         dev = ohci_find_device(ohci, OHCI_BM(ed->flags, ED_FA));
         ep = usb_ep_get(dev, pid, OHCI_BM(ed->flags, ED_EN));
-        usb_packet_setup(&ohci->usb_packet, pid, ep);
+        usb_packet_setup(&ohci->usb_packet, pid, ep, addr);
         usb_packet_addbuf(&ohci->usb_packet, ohci->usb_buf, pktlen);
         ret = usb_handle_packet(dev, &ohci->usb_packet);
 #ifdef DEBUG_PACKET

hw/usb/hcd-uhci.c

@@ -748,6 +748,22 @@ static int uhci_complete_td(UHCIState *s, UHCI_TD *td, UHCIAsync *async, uint32_
     return TD_RESULT_COMPLETE;
 
 out:
+    /*
+     * We should not do any further processing on a queue with errors!
+     * This is esp. important for bulk endpoints with pipelining enabled
+     * (redirection to a real USB device), where we must cancel all the
+     * transfers after this one so that:
+     * 1) If they've completed already, they are not processed further
+     *    causing more stalls, originating from the same failed transfer
+     * 2) If still in flight, they are cancelled before the guest does
+     *    a clear stall, otherwise the guest and device can loose sync!
+     */
+    while (!QTAILQ_EMPTY(&async->queue->asyncs)) {
+        UHCIAsync *as = QTAILQ_FIRST(&async->queue->asyncs);
+        uhci_async_unlink(as);
+        uhci_async_cancel(as);
+    }
+
     switch(ret) {
     case USB_RET_STALL:
         td->ctrl |= TD_CTRL_STALL;
@@ -843,14 +859,14 @@ static int uhci_handle_td(UHCIState *s, uint32_t addr, UHCI_TD *td,
      * for initial isochronous requests
      */
     async->queue->valid = 32;
-    async->isoc  = td->ctrl & TD_CTRL_IOS;
+    async->isoc = td->ctrl & TD_CTRL_IOS;
 
     max_len = ((td->token >> 21) + 1) & 0x7ff;
     pid = td->token & 0xff;
 
     dev = uhci_find_device(s, (td->token >> 8) & 0x7f);
     ep = usb_ep_get(dev, pid, (td->token >> 15) & 0xf);
-    usb_packet_setup(&async->packet, pid, ep);
+    usb_packet_setup(&async->packet, pid, ep, addr);
     qemu_sglist_add(&async->sgl, td->buffer, max_len);
     usb_packet_map(&async->packet, &async->sgl);
 

hw/usb/hcd-xhci.c

@@ -1392,7 +1392,7 @@ static int xhci_setup_packet(XHCITransfer *xfer, USBDevice *dev)
 
     dir = xfer->in_xfer ? USB_TOKEN_IN : USB_TOKEN_OUT;
     ep = usb_ep_get(dev, dir, xfer->epid >> 1);
-    usb_packet_setup(&xfer->packet, dir, ep);
+    usb_packet_setup(&xfer->packet, dir, ep, xfer->trbs[0].addr);
     usb_packet_addbuf(&xfer->packet, xfer->data, xfer->data_length);
     DPRINTF("xhci: setup packet pid 0x%x addr %d ep %d\n",
             xfer->packet.pid, dev->addr, ep->nr);

qemu-timer.c

@@ -759,11 +759,8 @@ int init_timer_alarm(void)
         goto fail;
     }
 
-    /* first event is at time 0 */
     atexit(quit_timers);
-    t->pending = true;
     alarm_timer = t;
-
     return 0;
 
 fail:

target-i386/cpu.c

@@ -33,7 +33,9 @@
 #include "hyperv.h"
 
 #include "hw/hw.h"
+#if defined(CONFIG_KVM)
 #include <linux/kvm_para.h>
+#endif
 
 /* feature flags taken from "Intel Processor Identification and the CPUID
  * Instruction" and AMD's "CPUID Specification".  In cases of disagreement

target-xtensa/xtensa-semi.c

@@ -218,6 +218,8 @@ void HELPER(simcall)(CPUXtensaState *env)
 
     default:
         qemu_log("%s(%d): not implemented\n", __func__, regs[2]);
+        regs[2] = -1;
+        regs[3] = ENOSYS;
         break;
     }
 }

tests/qemu-iotests/030

@@ -125,6 +125,39 @@ class TestSingleDrive(ImageStreamingTestCase):
         result = self.vm.qmp('block-stream', device='nonexistent')
         self.assert_qmp(result, 'error/class', 'DeviceNotFound')
 
+
+class TestSmallerBackingFile(ImageStreamingTestCase):
+    backing_len = 1 * 1024 * 1024 # MB
+    image_len = 2 * backing_len
+
+    def setUp(self):
+        self.create_image(backing_img, self.backing_len)
+        qemu_img('create', '-f', iotests.imgfmt, '-o', 'backing_file=%s' % backing_img, test_img, str(self.image_len))
+        self.vm = iotests.VM().add_drive(test_img)
+        self.vm.launch()
+
+    # If this hangs, then you are missing a fix to complete streaming when the
+    # end of the backing file is reached.
+    def test_stream(self):
+        self.assert_no_active_streams()
+
+        result = self.vm.qmp('block-stream', device='drive0')
+        self.assert_qmp(result, 'return', {})
+
+        completed = False
+        while not completed:
+            for event in self.vm.get_qmp_events(wait=True):
+                if event['event'] == 'BLOCK_JOB_COMPLETED':
+                    self.assert_qmp(event, 'data/type', 'stream')
+                    self.assert_qmp(event, 'data/device', 'drive0')
+                    self.assert_qmp(event, 'data/offset', self.image_len)
+                    self.assert_qmp(event, 'data/len', self.image_len)
+                    completed = True
+
+        self.assert_no_active_streams()
+        self.vm.shutdown()
+
+
 class TestStreamStop(ImageStreamingTestCase):
     image_len = 8 * 1024 * 1024 * 1024 # GB
 

tests/qemu-iotests/030.out

@@ -1,5 +1,5 @@
-......
+.......
 ----------------------------------------------------------------------
-Ran 6 tests
+Ran 7 tests
 
 OK