Compare commits

...
48 Commits
Author SHA1 Message Date
Markus Armbruster 6394bd0e05 pc: Fix CMOS info for drives defined with -device
Drives defined with -drive if=ide get get created along with the IDE
controller, inside machine->init().  That's before cmos_init().
Drives defined with -device get created during generic device init.
That's after cmos_init().  Because of that, CMOS has no information on
them (type, geometry, translation).  Older versions of Windows such as
XP reportedly choke on that.

Split off the part of CMOS initialization that needs to know about
-device devices, and turn it into a reset handler, so it runs after
device creation.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit c0897e0cb9)
2010-08-16 19:42:40 +02:00
Markus Armbruster fa719811ac ide: Make PIIX and ISA IDE init functions return the qdev
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 57c888664b)
2010-08-16 19:42:04 +02:00
Aurelien Jarno 174f225e9d Update for 0.12.5 release
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-22 14:39:04 +02:00
malc e916448940 audio/alsa: Handle SND_PCM_STATE_SETUP in alsa_poll_handler
Signed-off-by: malc <av1474@comtv.ru>
(cherry picked from commit d9812b033a)
2010-07-22 14:37:23 +02:00
Kevin Wolf bb44e0bbce block: Handle multiwrite errors only when all requests have completed
Don't try to be clever by freeing all temporary data and calling all callbacks
when the return value (an error) is certain. Doing so has at least two
important problems:

* The temporary data that is freed (qiov, possibly zero buffer) is still used
  by the requests that have not yet completed.
* Calling the callbacks for all requests in the multiwrite means for the caller
  that it may free buffers etc. which are still in use.

Just remember the error value and do the cleanup when all requests have
completed.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit de189a1b4a)
2010-07-14 13:09:24 +02:00
Kevin Wolf 191d44fc43 block: Fix early failure in multiwrite
bdrv_aio_writev may call the callback immediately (and it will commonly do so
in error cases). Current code doesn't consider this. For details see the
comment added by this patch.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 453f9a1652)

Conflicts:

	block.c

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-14 13:09:24 +02:00
Kevin Wolf a2f0cbaa58 vpc: Use bdrv_(p)write_sync for metadata writes
Use bdrv_(p)write_sync to ensure metadata integrity in case of a crash.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 078a458e07)

Conflicts:

	block/vpc.c

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-14 13:08:45 +02:00
Kevin Wolf a9d9a66f13 vmdk: Use bdrv_(p)write_sync for metadata writes
Use bdrv_(p)write_sync to ensure metadata integrity in case of a crash.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit b8852e87d9)

Conflicts:

	block/vmdk.c

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-14 13:08:04 +02:00
Kevin Wolf 37060c28e5 qcow2: Use bdrv_(p)write_sync for metadata writes
Use bdrv_(p)write_sync to ensure metadata integrity in case of a crash.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 8b3b720620)

Conflicts:

	block/qcow2-cluster.c
	block/qcow2-refcount.c
	block/qcow2-snapshot.c
	block/qcow2.c

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-14 12:39:38 +02:00
Kevin Wolf 7205c21e76 qcow: Use bdrv_(p)write_sync for metadata writes
Use bdrv_(p)write_sync to ensure metadata integrity in case of a crash.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 5e5557d970)

Conflicts:

	block/qcow.c

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-14 12:18:35 +02:00
Kevin Wolf ceef722d01 block: Add bdrv_(p)write_sync
Add new functions that write and flush the written data to disk immediately.
This is what needs to be used for image format metadata to maintain integrity
for cache=... modes that don't use O_DSYNC. (Actually, we only need barriers,
and therefore the functions are defined as such, but flushes is what is
implemented in this patch - we can try to change that later)

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit f08145fe16)
2010-07-14 12:18:26 +02:00
Kevin Wolf dfe0bb55ee qcow2: Restore L1 entry on l2_allocate failure
If writing the L1 table to disk failed, we need to restore its old content in
memory to avoid inconsistencies.

Reported-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 68dba0bf45)
2010-07-14 11:55:31 +02:00
Kevin Wolf 6fd82592ce block/vdi: Fix image opening and creation for odd disk sizes
The fix is based on a patch from Kevin Wolf. Here his comment:

"The number of blocks needs to be rounded up to cover all of the virtual hard
disk. Without this fix, we can't even open our own images if their size is not
a multiple of the block size."

While Kevin's patch addressed vdi_create, my modification also fixes
vdi_open which now accepts images with odd disk sizes.

v3:
Don't allow reading of disk images with too large disk sizes.
Neither VBoxManage nor old versions of qemu-img read such images.
This change requires rounding of odd disk sizes before we do the checks.

Cc: Kevin Wolf <kwolf@redhat.com>
Cc: François Revol <revol@free.fr>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit f21dc3a465)

Conflicts:

	block/vdi.c

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-14 11:50:47 +02:00
Stefan Weil 39187b5192 block/vpc: Fix conversion from size to disk geometry
The VHD algorithm calculates a disk geometry
which is usually smaller than the requested size.

QEMU tried to round up but failed for certain sizes:

qemu-img create -f vpc disk.vpc 9437184
would create an image with 9435136 bytes
(which is too small for qemu-img convert).

Instead of hacking the geometry algorithm, the patch
increases the number of sectors until we get enough
sectors.

Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit dede4188cc)
2010-07-14 11:46:22 +02:00
Kevin Wolf 729862401d qcow2: Remove abort on free_clusters failure
While it's true that during regular operation free_clusters failure would be a
bug, an I/O error can always happen. There's no need to kill the VM, the worst
thing that can happen (and it will) is that we leak some clusters.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 003fad6e2c)
2010-07-14 11:45:07 +02:00
Kevin Wolf 34d0d68bdf vmdk: Fix COW
When trying to do COW, VMDK wrote the data back to the backing file. This
problem was revealed by the patch that made backing files read-only. This patch
does not only fix the problem, but also simplifies the VMDK code a bit.

This fixes the backing file qemu-iotests cases for VMDK.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit c336500df5)
2010-07-14 10:41:09 +02:00
Kevin Wolf 82e9cbeb0d qcow2: Fix creation of large images
qcow_create2 assumes that the new image will only need one cluster for its
refcount table initially. Obviously that's not true any more when the image is
big enough (exact value depends on the cluster size).

This patch calculates the refcount table size dynamically.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 4768fa902c)

Conflicts:

	block/qcow2.c

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-14 10:33:49 +02:00
Kevin Wolf 2020dd5535 vmdk: fix double free
fail_gd error case would also free rgd_buf that was already freed

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
(cherry picked from commit a161329b61)

Conflicts:

	block/vmdk.c

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-14 10:30:42 +02:00
Aurelien Jarno 0c0f53e25c qemu-options: add documentation for stdio signal=on|off
Commit 5989020bc1 introduced a chardev
option to disable signals on stdio. Add the corresponding documentation.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-13 21:18:13 +02:00
Chih-Min Chao 3dbe0714dd target-arm : fix parallel saturated subtraction implementation
Signed-off-by: Chih-Min Chao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
(cherry picked from commit 4c4fd3f852)
2010-07-01 23:57:36 +02:00
Chih-Min Chao 9067bac11d target-arm : fix thumb2 parallel add/sub opcode decoding
Signed-off-by: Chih-Min Chao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
(cherry picked from commit ed89a2f1b1)
2010-07-01 23:57:02 +02:00
Chih-Min Chao 74471f3742 target-arm: fix addsub/subadd implementation
Signed-off-by: Chih-Min Chao <cmchao@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
(cherry picked from commit bb42e28bdb)
2010-07-01 23:56:49 +02:00
Richard Henderson 370f80376a target-i386: fix xchg rax,r8
We were ignoring REX_B while special-casing NOP, i.e. xchg eax,eax.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
(cherry picked from commit 7418027ea4)
2010-07-01 23:56:32 +02:00
Kirill A. Shutemov ed3aac289a block/vvfat.c: fix warnings with _FORTIFY_SOURCE
CC    block/vvfat.o
cc1: warnings being treated as errors
block/vvfat.c: In function 'commit_one_file':
block/vvfat.c:2259: error: ignoring return value of 'ftruncate', declared with attribute warn_unused_result
make: *** [block/vvfat.o] Error 1
  CC    block/vvfat.o
In file included from /usr/include/stdio.h:912,
                 from ./qemu-common.h:19,
                 from block/vvfat.c:27:
In function 'snprintf',
    inlined from 'init_directories' at block/vvfat.c:871,
    inlined from 'vvfat_open' at block/vvfat.c:1068:
/usr/include/bits/stdio2.h:65: error: call to __builtin___snprintf_chk will always overflow destination buffer
make: *** [block/vvfat.o] Error 1

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
(cherry picked from commit 2dedf83ef0)
2010-06-30 23:40:48 +02:00
Vagrant Cascadian 11b52a6536 audio/alsa: Spelling typo (paramters)
Trivial patch to fix the spelling of "parameters".

Signed-off-by: malc <av1474@comtv.ru>
(cherry picked from commit f093feb735)
2010-06-30 23:39:08 +02:00
Aurelien Jarno b6185fc79c target-mips: fix DINSU instruction
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 23:38:04 +02:00
Jes Sorensen 8fd7d5438e Correct definitions for FD_CMD_SAVE and FD_CMD_RESTORE
Correct definitions for FD_CMD_SAVE and FD_CMD_RESTORE in hw/fdc.c

Per https://bugs.launchpad.net/qemu/+bug/424453 the correct values
for FD_CMD_SAVE is 0x2e and FD_CMD_RESTORE is 0x4e. Verified against
the Intel 82078 manual which can be found at:
http://wiki.qemu.org/Documentation/HardwareManuals page 22.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit bb350a5e9b)
2010-06-15 22:50:47 +02:00
Kevin Wolf a513171f80 qcow2: Fix corruption after error in update_refcount
After it is done with updating refcounts in the cache, update_refcount writes
all changed entries to disk. If a refcount block allocation fails, however,
there was no change yet and therefore first_index = last_index = -1. Don't
treat -1 as a normal sector index (resulting in a 512 byte write!) but return
without updating anything in this case.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 86fa8da837)
2010-06-09 18:36:09 +02:00
Kevin Wolf ff9e177617 qcow2: Fix corruption after refblock allocation
Refblock allocation code needs to take into consideration that update_refcount
will load a different refcount block into the cache, so it must initialize the
cache for a new refcount block only afterwards. Not doing this means that not
only the refcount in the wrong block is updated, but also that the caller will
work on the wrong block.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 25408c0950)
2010-06-09 18:36:09 +02:00
Kevin Wolf db3519a9ec block: Fix multiwrite with overlapping requests
With overlapping requests, the total number of sectors is smaller than the sum
of the nb_sectors of both requests.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit cbf1dff2f1)
2010-06-09 18:36:09 +02:00
Kevin Wolf 258e351d12 qcow2: Fix error handling in l2_allocate
l2_allocate has some intermediate states in which the image is inconsistent.
Change the order to write to the L1 table only after the new L2 table has
successfully been initialized.

Also reset the L2 cache in failure case, it's very likely wrong.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 175e11526e)

Conflicts:

	block/qcow2-cluster.c

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-09 18:36:09 +02:00
Kevin Wolf cd14f4d346 qcow2: Clear L2 table cache after write error
If the L2 table was already updated in cache, but writing it to disk has
failed, we must not continue using the changed version in the cache to stay
consistent with what's on the disk.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 1b7c801b40)

Conflicts:

	block/qcow2-cluster.c

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-09 18:36:09 +02:00
Kevin Wolf df631629b1 ide: Fix ide_dma_cancel
When cancelling a request, bdrv_aio_cancel may decide that it waits for
completion of a request rather than for cancellation. IDE therefore can't
abandon its DMA status before calling bdrv_aio_cancel; otherwise the callback
of a completed request would use invalid data.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 38d8dfa193)
2010-06-09 18:36:09 +02:00
Luiz Capitulino af0269b036 usb-bus: fix no params
After commit 702f3e0fb5, the params is
nerver NULL. It should check *params instead of params to determine
whether the params is empty.

Signed-off-by: TeLeMan <geleman@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
(cherry picked from commit 98f22dc172)
2010-06-09 12:45:03 +02:00
Jan Kiszka d37dbf988d Avoid crash on '-usbdevice <device>' without parameters
Many usbdevice_init implementors assume params is non-NULL.

Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
(cherry picked from commit 702f3e0fb5)
2010-06-09 12:44:57 +02:00
Paul Brook cc7ed88f28 Fix -usbdevice crash
If -usbdevice is used on a machine with no USB busses, usb_create
will fail and return NULL.  Patch below handles this failure gracefully
rather than crashing when we try to init the device.

Signed-off-by: Paul Brook <paul@codesourcery.com>
(cherry picked from commit d44168fffa)
2010-06-09 12:44:56 +02:00
Alexander Graf 07442ab4a1 Fix multiboot compilation
Commit dd4239d657 broke multiboot. It replaced the
instruction "rep insb (%dx), %es:(%edi)" by the binary output of
"addr32 rep insb (%dx), %es:(%di)".

Linuxboot calls the respective helper function in a code16 section. So the
original instruction was automatically translated to its "addr32" equivalent.
For multiboot, we're running in code32 so gcc didn't add the "addr32" which
breaks the instruction.

This patch splits that helper function in one which uses addr32 and one which
does not, so everyone's happy.

The good news is that nobody probably cared so far. The bundled multiboot.bin
binary was built before the change and is thus correct.

Please also put this patch into -stable.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
(cherry picked from commit 590bf491a4)
2010-06-09 12:36:11 +02:00
Loïc Minier dbe6a18d82 Fix missing symbols in .rel/.rela.plt sections
Fix .rel.plt sections in the output to not only include .rel.plt
sections from the input but also the .rel.iplt sections and to define
the hidden symbols __rel_iplt_start and __rel_iplt_end around
.rel.iplt as otherwise we get undefined references to these when
linking statically to a multilib libc.a.  This fixes the static build
under i386.

Apply similar logic to rela.plt/.iplt and __rela_iplt/_plt_start/_end to
fix the static build under amd64.

Signed-off-by: Loïc Minier <lool@dooz.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
(cherry picked from commit 845f2c2812)
2010-06-02 20:45:03 +02:00
Thomas Monjalon 7dd007c2ed target-ppc: fix RFI by clearing some bits of MSR
Since commit 2ada0ed, "Return From Interrupt" is broken for PPC processors
because some interrupt specifics bits of SRR1 are copied to MSR.

SRR1 is a save of MSR during interrupt.
During RFI, MSR must be restored from SRR1.
But some bits of SRR1 are interrupt-specific and are not used for MSR saving.

This is the specification (ISA 2.06) at chapter 6.4.3 (Interrupt Processing):
"2. Bits 33:36 and 42:47 of SRR1 or HSRR1 are loaded with information specific
    to the interrupt type.
 3. Bits 0:32, 37:41, and 48:63 of SRR1 or HSRR1 are loaded with a copy of the
    corresponding bits of the MSR."

Below is a representation of MSR bits which are not saved:
0:15 16:31 32  33:36    37:41      42:47     48:63
——— | ——— | — X X X X — — — — — X X X X X X | ————
0000 0000 |    7   |   8   |   3   |   F    | 0000

History:
In the initial Qemu implementation (e1833e1), the mask 0x783F0000 was used for
saving MSR in SRR1. But all the bits 32:47 were cleared during RFI restoring.
This was wrong. The commit 2ada0ed explains that this breaks Altivec.
Indeed, bit 38 (for Altivec support) must be saved and restored.
The change of 2ada0ed was to restore all the bits of SRR1 to MSR.
But it's also wrong.

Explanation:
As an example, let's see what's happening after a TLB miss.
According to the e300 manual (E300CORERM table 5-6), the TLB miss interrupts
set the bits 44-47 for KEY, I/D, WAY and S/L. These bits are specifics to the
interrupt and must not be copied into MSR at the end of the interrupt.
With the current implementation, a TLB miss overwrite bits POW, TGPR and ILE.

Fix:
It shouldn't be needed to filter-out bits on MSR saving when interrupt occurs.
Specific bits overwrite MSR ones in SRR1.
But at the end of interrupt (RFI), specifics bits must be cleared before
restoring MSR from SRR1. The mask 0x783F0000 apply here.

Discussion:
The bits of the mask 0x783F0000 are cleared after an interrupt.
I cannot find a specification which talks about this
but I assume it is the truth since Linux can run this way.
Maybe it's not perfect but it's better (works for e300).

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
(cherry picked from commit c3d420ead1)
2010-05-31 22:26:37 +02:00
Riccardo Magliocchetti 9c6a8f503d Fix typo in balloon help
Fix launchpad #563883

Signed-off-by: Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
(cherry picked from commit 3c05613a6a)
2010-05-28 22:59:04 +02:00
Rabin Vincent 0c459361a1 arm_timer: fix oneshot mode
In oneshot mode, the delta needs to come from the TimerLoad register,
not the maximum limit.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
(cherry picked from commit a9cf98d939)
2010-05-27 15:52:57 +02:00
Rabin Vincent 72d3457e8d arm_timer: reload timer when enabled
Reload the timer when TimerControl is written, if the timer is to be
enabled.  Otherwise, if an earlier write to TimerLoad was done while
periodic mode was not set, s->delta may incorrectly still have the value
of the maximum limit instead of the value written to TimerLoad.

This problem is evident on versatileap on current linux-next, which
enables TIMER_CTRL_32BIT before writing to TimerLoad and then enabling
periodic mode and starting the timer.  This causes the first periodic
tick to be scheduled to occur after 0xffffffff periods, leading to a
perceived hang while the kernel waits for the first timer tick.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
(cherry picked from commit d6759902cb)
2010-05-27 15:52:52 +02:00
Jens Osterkamp e1f0c1d05d qemu-sockets: avoid strlen of NULL pointer
If the user wants to create a chardev of type socket but forgets to give a
host= option, qemu_opt_get returns NULL. This NULL pointer is then fed into
strlen a few lines below without a check which results in a segfault.
This fixes it.

Signed-off-by: Jens Osterkamp <jens@linux.vnet.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
(cherry picked from commit e23a22e620)
2010-05-27 15:52:42 +02:00
Avi Kivity 74bcc51b99 block: fix aio_flush segfaults for read-only protocols (e.g. curl)
Not all block format drivers expose an io_flush method (reasonable for
read-only protocols), so calling io_flush there will immediately segfault.

Fix by checking for the method's existence before calling it.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit c53a7285b4)
2010-05-27 13:58:57 +02:00
Christoph Hellwig 7e4f956056 virtio-blk: fix barrier support
Before issuing the barrier to the block driver we need to flush our oustanding
queue of write requests, as the flush is supposed to be issued after them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 618fbb8429)
2010-05-27 13:58:42 +02:00
Christoph Hellwig 1fb9798b69 block: fix sector comparism in multiwrite_req_compare
The difference between the start sectors of two requests can be larger
than the size of the "int" type, which can lead to a not correctly
sorted multiwrite array and thus spurious I/O errors and filesystem
corruption due to incorrect request merges.

So instead of doing the cute sector arithmetics trick spell out the
exact comparisms.

Spotted by Kevin Wolf based on a testcase from Michael Tokarev.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 77be4366ba)
2010-05-27 13:58:34 +02:00
Michael S. Tsirkin 9f6a84bc43 pci: irq_state vmstate breakage
Code for saving irq_state got vm_state
macros wrong, passing in the wrong parameter.
As a result, we both saved a wrong value
and restored it to a wrong offset.

This leads to device and bus irq counts getting
out of sync, which in turn leads to interrupts getting lost or
never cleared, such as
https://bugzilla.redhat.com/show_bug.cgi?id=588133

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
(cherry picked from commit c3f8f61157)
2010-05-18 13:27:46 +02:00
TeLeMan 8cef921d18 qemu-img: use the heap instead of the huge stack array for win32
The default stack size of PE is 1MB on win32 and IO_BUF_SIZE in
img_convert() & img_rebase() is 2MB, so qemu-img will crash when doing
"convert" & "rebase" on win32.
Although we can improve the stack size of PE to resolve it, I think we
should avoid using the huge stack variables.

Signed-off-by: TeLeMan <geleman@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
(cherry picked from commit 72ff25e4e9)
2010-05-07 09:07:42 +02:00
45 changed files with 543 additions and 243 deletions

No files matched your search

+47
View File
@@ -1,3 +1,50 @@
version 0.12.5
- audio/alsa: Handle SND_PCM_STATE_SETUP in alsa_poll_handler
- block: Handle multiwrite errors only when all requests have completed
- block: Fix early failure in multiwrite
- vpc: Use bdrv_(p)write_sync for metadata writes
- vmdk: Use bdrv_(p)write_sync for metadata writes
- qcow2: Use bdrv_(p)write_sync for metadata writes
- qcow: Use bdrv_(p)write_sync for metadata writes
- block: Add bdrv_(p)write_sync
- qcow2: Restore L1 entry on l2_allocate failure
- block/vdi: Fix image opening and creation for odd disk sizes
- block/vpc: Fix conversion from size to disk geometry
- qcow2: Remove abort on free_clusters failure
- vmdk: Fix COW
- qcow2: Fix creation of large images
- vmdk: fix double free
- qemu-options: add documentation for stdio signal=on|off
- target-arm : fix parallel saturated subtraction implementation
- target-arm : fix thumb2 parallel add/sub opcode decoding
- target-arm: fix addsub/subadd implementation
- target-i386: fix xchg rax,r8
- block/vvfat.c: fix warnings with _FORTIFY_SOURCE
- audio/alsa: Spelling typo (paramters)
- target-mips: fix DINSU instruction
- Correct definitions for FD_CMD_SAVE and FD_CMD_RESTORE
- qcow2: Fix corruption after error in update_refcount
- qcow2: Fix corruption after refblock allocation
- block: Fix multiwrite with overlapping requests
- qcow2: Fix error handling in l2_allocate
- qcow2: Clear L2 table cache after write error
- ide: Fix ide_dma_cancel
- usb-bus: fix no params
- Avoid crash on '-usbdevice <device>' without parameters
- Fix -usbdevice crash
- Fix multiboot compilation
- Fix missing symbols in .rel/.rela.plt sections
- target-ppc: fix RFI by clearing some bits of MSR
- Fix typo in balloon help
- arm_timer: fix oneshot mode
- arm_timer: reload timer when enabled
- qemu-sockets: avoid strlen of NULL pointer
- block: fix aio_flush segfaults for read-only protocols (e.g. curl)
- virtio-blk: fix barrier support
- block: fix sector comparism in multiwrite_req_compare
- pci: irq_state vmstate breakage
- qemu-img: use the heap instead of the huge stack array for win32
version 0.12.4
- Workaround for broken OSS_GETVERSION on FreeBSD, part two (Juergen Lock)
- oss: fix fragment setting (malc)
+1 -1
View File
@@ -1 +1 @@
0.12.4
0.12.5
+3 -1
View File
@@ -113,7 +113,9 @@ void qemu_aio_flush(void)
qemu_aio_wait();
QLIST_FOREACH(node, &aio_handlers, node) {
ret |= node->io_flush(node->opaque);
if (node->io_flush) {
ret |= node->io_flush(node->opaque);
}
}
} while (qemu_bh_poll() || ret > 0);
}
+5 -1
View File
@@ -213,6 +213,10 @@ static void alsa_poll_handler (void *opaque)
state = snd_pcm_state (hlp->handle);
switch (state) {
case SND_PCM_STATE_SETUP:
alsa_recover (hlp->handle);
break;
case SND_PCM_STATE_XRUN:
alsa_recover (hlp->handle);
break;
@@ -665,7 +669,7 @@ static int alsa_open (int in, struct alsa_params_req *req,
(obt->fmt != req->fmt ||
obt->nchannels != req->nchannels ||
obt->freq != req->freq)) {
dolog ("Audio paramters for %s\n", typ);
dolog ("Audio parameters for %s\n", typ);
alsa_dump_info (req, obt);
}
+84 -13
View File
@@ -452,6 +452,8 @@ int bdrv_open2(BlockDriverState *bs, const char *filename, int flags,
(flags & (BDRV_O_CACHE_MASK|BDRV_O_NATIVE_AIO));
else
open_flags = flags & ~(BDRV_O_FILE | BDRV_O_SNAPSHOT);
bs->open_flags = open_flags;
if (use_bdrv_whitelist && !bdrv_is_whitelisted(drv))
ret = -ENOTSUP;
else
@@ -779,6 +781,43 @@ int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
return count1;
}
/*
* Writes to the file and ensures that no writes are reordered across this
* request (acts as a barrier)
*
* Returns 0 on success, -errno in error cases.
*/
int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
const void *buf, int count)
{
int ret;
ret = bdrv_pwrite(bs, offset, buf, count);
if (ret < 0) {
return ret;
}
/* No flush needed for cache=writethrough, it uses O_DSYNC */
if ((bs->open_flags & BDRV_O_CACHE_MASK) != 0) {
bdrv_flush(bs);
}
return 0;
}
/*
* Writes to the file and ensures that no writes are reordered across this
* request (acts as a barrier)
*
* Returns 0 on success, -errno in error cases.
*/
int bdrv_write_sync(BlockDriverState *bs, int64_t sector_num,
const uint8_t *buf, int nb_sectors)
{
return bdrv_pwrite_sync(bs, BDRV_SECTOR_SIZE * sector_num,
buf, BDRV_SECTOR_SIZE * nb_sectors);
}
/**
* Truncate file to 'offset' bytes (needed only for file protocols)
*/
@@ -1622,21 +1661,30 @@ static void multiwrite_cb(void *opaque, int ret)
if (ret < 0 && !mcb->error) {
mcb->error = ret;
multiwrite_user_cb(mcb);
}
mcb->num_requests--;
if (mcb->num_requests == 0) {
if (mcb->error == 0) {
multiwrite_user_cb(mcb);
}
multiwrite_user_cb(mcb);
qemu_free(mcb);
}
}
static int multiwrite_req_compare(const void *a, const void *b)
{
return (((BlockRequest*) a)->sector - ((BlockRequest*) b)->sector);
const BlockRequest *req1 = a, *req2 = b;
/*
* Note that we can't simply subtract req2->sector from req1->sector
* here as that could overflow the return value.
*/
if (req1->sector > req2->sector) {
return 1;
} else if (req1->sector < req2->sector) {
return -1;
} else {
return 0;
}
}
/*
@@ -1699,7 +1747,7 @@ static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs,
// Add the second request
qemu_iovec_concat(qiov, reqs[i].qiov, reqs[i].qiov->size);
reqs[outidx].nb_sectors += reqs[i].nb_sectors;
reqs[outidx].nb_sectors = qiov->size >> 9;
reqs[outidx].qiov = qiov;
mcb->callbacks[i].free_qiov = reqs[outidx].qiov;
@@ -1751,8 +1799,29 @@ int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs)
// Check for mergable requests
num_reqs = multiwrite_merge(bs, reqs, num_reqs, mcb);
// Run the aio requests
/*
* Run the aio requests. As soon as one request can't be submitted
* successfully, fail all requests that are not yet submitted (we must
* return failure for all requests anyway)
*
* num_requests cannot be set to the right value immediately: If
* bdrv_aio_writev fails for some request, num_requests would be too high
* and therefore multiwrite_cb() would never recognize the multiwrite
* request as completed. We also cannot use the loop variable i to set it
* when the first request fails because the callback may already have been
* called for previously submitted requests. Thus, num_requests must be
* incremented for each request that is submitted.
*
* The problem that callbacks may be called early also means that we need
* to take care that num_requests doesn't become 0 before all requests are
* submitted - multiwrite_cb() would consider the multiwrite request
* completed. A dummy request that is "completed" by a manual call to
* multiwrite_cb() takes care of this.
*/
mcb->num_requests = 1;
for (i = 0; i < num_reqs; i++) {
mcb->num_requests++;
acb = bdrv_aio_writev(bs, reqs[i].sector, reqs[i].qiov,
reqs[i].nb_sectors, multiwrite_cb, mcb);
@@ -1760,23 +1829,25 @@ int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs)
// We can only fail the whole thing if no request has been
// submitted yet. Otherwise we'll wait for the submitted AIOs to
// complete and report the error in the callback.
if (mcb->num_requests == 0) {
reqs[i].error = -EIO;
if (i == 0) {
goto fail;
} else {
mcb->num_requests++;
multiwrite_cb(mcb, -EIO);
break;
}
} else {
mcb->num_requests++;
}
}
/* Complete the dummy request */
multiwrite_cb(mcb, 0);
return 0;
fail:
free(mcb);
for (i = 0; i < mcb->num_callbacks; i++) {
reqs[i].error = -EIO;
}
qemu_free(mcb);
return -1;
}
+4
View File
@@ -77,6 +77,10 @@ int bdrv_pread(BlockDriverState *bs, int64_t offset,
void *buf, int count);
int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
const void *buf, int count);
int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
const void *buf, int count);
int bdrv_write_sync(BlockDriverState *bs, int64_t sector_num,
const uint8_t *buf, int nb_sectors);
int bdrv_truncate(BlockDriverState *bs, int64_t offset);
int64_t bdrv_getlength(BlockDriverState *bs);
void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr);
+10 -8
View File
@@ -277,8 +277,9 @@ static uint64_t get_cluster_offset(BlockDriverState *bs,
/* update the L1 entry */
s->l1_table[l1_index] = l2_offset;
tmp = cpu_to_be64(l2_offset);
if (bdrv_pwrite(s->hd, s->l1_table_offset + l1_index * sizeof(tmp),
&tmp, sizeof(tmp)) != sizeof(tmp))
if (bdrv_pwrite_sync(s->hd,
s->l1_table_offset + l1_index * sizeof(tmp),
&tmp, sizeof(tmp)) < 0)
return 0;
new_l2_table = 1;
}
@@ -306,8 +307,8 @@ static uint64_t get_cluster_offset(BlockDriverState *bs,
l2_table = s->l2_cache + (min_index << s->l2_bits);
if (new_l2_table) {
memset(l2_table, 0, s->l2_size * sizeof(uint64_t));
if (bdrv_pwrite(s->hd, l2_offset, l2_table, s->l2_size * sizeof(uint64_t)) !=
s->l2_size * sizeof(uint64_t))
if (bdrv_pwrite_sync(s->hd, l2_offset, l2_table,
s->l2_size * sizeof(uint64_t)) < 0)
return 0;
} else {
if (bdrv_pread(s->hd, l2_offset, l2_table, s->l2_size * sizeof(uint64_t)) !=
@@ -372,8 +373,8 @@ static uint64_t get_cluster_offset(BlockDriverState *bs,
/* update L2 table */
tmp = cpu_to_be64(cluster_offset);
l2_table[l2_index] = tmp;
if (bdrv_pwrite(s->hd,
l2_offset + l2_index * sizeof(tmp), &tmp, sizeof(tmp)) != sizeof(tmp))
if (bdrv_pwrite_sync(s->hd, l2_offset + l2_index * sizeof(tmp),
&tmp, sizeof(tmp)) < 0)
return 0;
}
return cluster_offset;
@@ -821,8 +822,9 @@ static int qcow_make_empty(BlockDriverState *bs)
int ret;
memset(s->l1_table, 0, l1_length);
if (bdrv_pwrite(s->hd, s->l1_table_offset, s->l1_table, l1_length) < 0)
return -1;
if (bdrv_pwrite_sync(s->hd, s->l1_table_offset, s->l1_table,
l1_length) < 0)
return -1;
ret = bdrv_truncate(s->hd, s->l1_table_offset + l1_length);
if (ret < 0)
return ret;
+40 -32
View File
@@ -62,8 +62,8 @@ int qcow2_grow_l1_table(BlockDriverState *bs, int min_size)
for(i = 0; i < s->l1_size; i++)
new_l1_table[i] = cpu_to_be64(new_l1_table[i]);
ret = bdrv_pwrite(s->hd, new_l1_table_offset, new_l1_table, new_l1_size2);
if (ret != new_l1_size2)
ret = bdrv_pwrite_sync(s->hd, new_l1_table_offset, new_l1_table, new_l1_size2);
if (ret < 0)
goto fail;
for(i = 0; i < s->l1_size; i++)
new_l1_table[i] = be64_to_cpu(new_l1_table[i]);
@@ -71,8 +71,8 @@ int qcow2_grow_l1_table(BlockDriverState *bs, int min_size)
/* set new table */
cpu_to_be32w((uint32_t*)data, new_l1_size);
cpu_to_be64w((uint64_t*)(data + 4), new_l1_table_offset);
ret = bdrv_pwrite(s->hd, offsetof(QCowHeader, l1_size), data,sizeof(data));
if (ret != sizeof(data)) {
ret = bdrv_pwrite_sync(s->hd, offsetof(QCowHeader, l1_size), data,sizeof(data));
if (ret < 0) {
goto fail;
}
qemu_free(s->l1_table);
@@ -84,7 +84,7 @@ int qcow2_grow_l1_table(BlockDriverState *bs, int min_size)
fail:
qemu_free(new_l1_table);
qcow2_free_clusters(bs, new_l1_table_offset, new_l1_size2);
return ret < 0 ? ret : -EIO;
return ret;
}
void qcow2_l2_cache_reset(BlockDriverState *bs)
@@ -188,17 +188,17 @@ static int write_l1_entry(BDRVQcowState *s, int l1_index)
{
uint64_t buf[L1_ENTRIES_PER_SECTOR];
int l1_start_index;
int i;
int i, ret;
l1_start_index = l1_index & ~(L1_ENTRIES_PER_SECTOR - 1);
for (i = 0; i < L1_ENTRIES_PER_SECTOR; i++) {
buf[i] = cpu_to_be64(s->l1_table[l1_start_index + i]);
}
if (bdrv_pwrite(s->hd, s->l1_table_offset + 8 * l1_start_index,
buf, sizeof(buf)) != sizeof(buf))
{
return -1;
ret = bdrv_pwrite_sync(s->hd, s->l1_table_offset + 8 * l1_start_index,
buf, sizeof(buf));
if (ret < 0) {
return ret;
}
return 0;
@@ -221,6 +221,7 @@ static uint64_t *l2_allocate(BlockDriverState *bs, int l1_index)
uint64_t old_l2_offset;
uint64_t *l2_table;
int64_t l2_offset;
int ret;
old_l2_offset = s->l1_table[l1_index];
@@ -231,13 +232,6 @@ static uint64_t *l2_allocate(BlockDriverState *bs, int l1_index)
return NULL;
}
/* update the L1 entry */
s->l1_table[l1_index] = l2_offset | QCOW_OFLAG_COPIED;
if (write_l1_entry(s, l1_index) < 0) {
return NULL;
}
/* allocate a new entry in the l2 cache */
min_index = l2_cache_new_entry(bs);
@@ -251,13 +245,20 @@ static uint64_t *l2_allocate(BlockDriverState *bs, int l1_index)
if (bdrv_pread(s->hd, old_l2_offset,
l2_table, s->l2_size * sizeof(uint64_t)) !=
s->l2_size * sizeof(uint64_t))
return NULL;
goto fail;
}
/* write the l2 table to the file */
if (bdrv_pwrite(s->hd, l2_offset,
l2_table, s->l2_size * sizeof(uint64_t)) !=
s->l2_size * sizeof(uint64_t))
return NULL;
ret = bdrv_pwrite_sync(s->hd, l2_offset, l2_table,
s->l2_size * sizeof(uint64_t));
if (ret < 0) {
goto fail;
}
/* update the L1 entry */
s->l1_table[l1_index] = l2_offset | QCOW_OFLAG_COPIED;
if (write_l1_entry(s, l1_index) < 0) {
goto fail;
}
/* update the l2 cache entry */
@@ -265,6 +266,11 @@ static uint64_t *l2_allocate(BlockDriverState *bs, int l1_index)
s->l2_cache_counts[min_index] = 1;
return l2_table;
fail:
s->l1_table[l1_index] = old_l2_offset;
qcow2_l2_cache_reset(bs);
return NULL;
}
static int count_contiguous_clusters(uint64_t nb_clusters, int cluster_size,
@@ -380,8 +386,8 @@ static int copy_sectors(BlockDriverState *bs, uint64_t start_sect,
s->cluster_data, n, 1,
&s->aes_encrypt_key);
}
ret = bdrv_write(s->hd, (cluster_offset >> 9) + n_start,
s->cluster_data, n);
ret = bdrv_write_sync(s->hd, (cluster_offset >> 9) + n_start,
s->cluster_data, n);
if (ret < 0)
return ret;
return 0;
@@ -593,10 +599,10 @@ uint64_t qcow2_alloc_compressed_cluster_offset(BlockDriverState *bs,
/* compressed clusters never have the copied flag */
l2_table[l2_index] = cpu_to_be64(cluster_offset);
if (bdrv_pwrite(s->hd,
if (bdrv_pwrite_sync(s->hd,
l2_offset + l2_index * sizeof(uint64_t),
l2_table + l2_index,
sizeof(uint64_t)) != sizeof(uint64_t))
sizeof(uint64_t)) < 0)
return 0;
return cluster_offset;
@@ -614,11 +620,12 @@ static int write_l2_entries(BDRVQcowState *s, uint64_t *l2_table,
int start_offset = (8 * l2_index) & ~511;
int end_offset = (8 * (l2_index + num) + 511) & ~511;
size_t len = end_offset - start_offset;
int ret;
if (bdrv_pwrite(s->hd, l2_offset + start_offset, &l2_table[l2_start_index],
len) != len)
{
return -1;
ret = bdrv_pwrite_sync(s->hd, l2_offset + start_offset,
&l2_table[l2_start_index], len);
if (ret < 0) {
return ret;
}
return 0;
@@ -672,8 +679,9 @@ int qcow2_alloc_cluster_link_l2(BlockDriverState *bs, QCowL2Meta *m)
(i << s->cluster_bits)) | QCOW_OFLAG_COPIED);
}
if (write_l2_entries(s, l2_table, l2_offset, l2_index, m->nb_clusters) < 0) {
ret = -1;
ret = write_l2_entries(s, l2_table, l2_offset, l2_index, m->nb_clusters);
if (ret < 0) {
qcow2_l2_cache_reset(bs);
goto err;
}
+30 -18
View File
@@ -42,8 +42,8 @@ static int write_refcount_block(BDRVQcowState *s)
return 0;
}
if (bdrv_pwrite(s->hd, s->refcount_block_cache_offset,
s->refcount_block_cache, size) != size)
if (bdrv_pwrite_sync(s->hd, s->refcount_block_cache_offset,
s->refcount_block_cache, size) < 0)
{
return -EIO;
}
@@ -215,8 +215,6 @@ static int64_t alloc_refcount_block(BlockDriverState *bs, int64_t cluster_index)
/* Allocate the refcount block itself and mark it as used */
uint64_t new_block = alloc_clusters_noref(bs, s->cluster_size);
memset(s->refcount_block_cache, 0, s->cluster_size);
s->refcount_block_cache_offset = new_block;
#ifdef DEBUG_ALLOC2
fprintf(stderr, "qcow2: Allocate refcount block %d for %" PRIx64
@@ -225,6 +223,10 @@ static int64_t alloc_refcount_block(BlockDriverState *bs, int64_t cluster_index)
#endif
if (in_same_refcount_block(s, new_block, cluster_index << s->cluster_bits)) {
/* Zero the new refcount block before updating it */
memset(s->refcount_block_cache, 0, s->cluster_size);
s->refcount_block_cache_offset = new_block;
/* The block describes itself, need to update the cache */
int block_index = (new_block >> s->cluster_bits) &
((1 << (s->cluster_bits - REFCOUNT_SHIFT)) - 1);
@@ -236,10 +238,15 @@ static int64_t alloc_refcount_block(BlockDriverState *bs, int64_t cluster_index)
if (ret < 0) {
goto fail_block;
}
/* Initialize the new refcount block only after updating its refcount,
* update_refcount uses the refcount cache itself */
memset(s->refcount_block_cache, 0, s->cluster_size);
s->refcount_block_cache_offset = new_block;
}
/* Now the new refcount block needs to be written to disk */
ret = bdrv_pwrite(s->hd, new_block, s->refcount_block_cache,
ret = bdrv_pwrite_sync(s->hd, new_block, s->refcount_block_cache,
s->cluster_size);
if (ret < 0) {
goto fail_block;
@@ -248,7 +255,7 @@ static int64_t alloc_refcount_block(BlockDriverState *bs, int64_t cluster_index)
/* If the refcount table is big enough, just hook the block up there */
if (refcount_table_index < s->refcount_table_size) {
uint64_t data64 = cpu_to_be64(new_block);
ret = bdrv_pwrite(s->hd,
ret = bdrv_pwrite_sync(s->hd,
s->refcount_table_offset + refcount_table_index * sizeof(uint64_t),
&data64, sizeof(data64));
if (ret < 0) {
@@ -325,7 +332,7 @@ static int64_t alloc_refcount_block(BlockDriverState *bs, int64_t cluster_index)
}
/* Write refcount blocks to disk */
ret = bdrv_pwrite(s->hd, meta_offset, new_blocks,
ret = bdrv_pwrite_sync(s->hd, meta_offset, new_blocks,
blocks_clusters * s->cluster_size);
qemu_free(new_blocks);
if (ret < 0) {
@@ -337,7 +344,7 @@ static int64_t alloc_refcount_block(BlockDriverState *bs, int64_t cluster_index)
cpu_to_be64s(&new_table[i]);
}
ret = bdrv_pwrite(s->hd, table_offset, new_table,
ret = bdrv_pwrite_sync(s->hd, table_offset, new_table,
table_size * sizeof(uint64_t));
if (ret < 0) {
goto fail_table;
@@ -351,7 +358,7 @@ static int64_t alloc_refcount_block(BlockDriverState *bs, int64_t cluster_index)
uint8_t data[12];
cpu_to_be64w((uint64_t*)data, table_offset);
cpu_to_be32w((uint32_t*)(data + 8), table_clusters);
ret = bdrv_pwrite(s->hd, offsetof(QCowHeader, refcount_table_offset),
ret = bdrv_pwrite_sync(s->hd, offsetof(QCowHeader, refcount_table_offset),
data, sizeof(data));
if (ret < 0) {
goto fail_table;
@@ -390,21 +397,26 @@ static int write_refcount_block_entries(BDRVQcowState *s,
int64_t refcount_block_offset, int first_index, int last_index)
{
size_t size;
int ret;
if (cache_refcount_updates) {
return 0;
}
if (first_index < 0) {
return 0;
}
first_index &= ~(REFCOUNTS_PER_SECTOR - 1);
last_index = (last_index + REFCOUNTS_PER_SECTOR)
& ~(REFCOUNTS_PER_SECTOR - 1);
size = (last_index - first_index) << REFCOUNT_SHIFT;
if (bdrv_pwrite(s->hd,
ret = bdrv_pwrite_sync(s->hd,
refcount_block_offset + (first_index << REFCOUNT_SHIFT),
&s->refcount_block_cache[first_index], size) != size)
{
return -EIO;
&s->refcount_block_cache[first_index], size);
if (ret < 0) {
return ret;
}
return 0;
@@ -620,7 +632,7 @@ void qcow2_free_clusters(BlockDriverState *bs,
ret = update_refcount(bs, offset, size, -1);
if (ret < 0) {
fprintf(stderr, "qcow2_free_clusters failed: %s\n", strerror(-ret));
abort();
/* TODO Remember the clusters to free them later and avoid leaking */
}
}
@@ -760,8 +772,8 @@ int qcow2_update_snapshot_refcount(BlockDriverState *bs,
}
}
if (l2_modified) {
if (bdrv_pwrite(s->hd,
l2_offset, l2_table, l2_size) != l2_size)
if (bdrv_pwrite_sync(s->hd,
l2_offset, l2_table, l2_size) < 0)
goto fail;
}
@@ -782,8 +794,8 @@ int qcow2_update_snapshot_refcount(BlockDriverState *bs,
if (l1_modified) {
for(i = 0; i < l1_size; i++)
cpu_to_be64s(&l1_table[i]);
if (bdrv_pwrite(s->hd, l1_table_offset, l1_table,
l1_size2) != l1_size2)
if (bdrv_pwrite_sync(s->hd, l1_table_offset, l1_table,
l1_size2) < 0)
goto fail;
for(i = 0; i < l1_size; i++)
be64_to_cpus(&l1_table[i]);
+11 -12
View File
@@ -158,25 +158,25 @@ static int qcow_write_snapshots(BlockDriverState *bs)
h.id_str_size = cpu_to_be16(id_str_size);
h.name_size = cpu_to_be16(name_size);
offset = align_offset(offset, 8);
if (bdrv_pwrite(s->hd, offset, &h, sizeof(h)) != sizeof(h))
if (bdrv_pwrite_sync(s->hd, offset, &h, sizeof(h)) < 0)
goto fail;
offset += sizeof(h);
if (bdrv_pwrite(s->hd, offset, sn->id_str, id_str_size) != id_str_size)
if (bdrv_pwrite_sync(s->hd, offset, sn->id_str, id_str_size) < 0)
goto fail;
offset += id_str_size;
if (bdrv_pwrite(s->hd, offset, sn->name, name_size) != name_size)
if (bdrv_pwrite_sync(s->hd, offset, sn->name, name_size) < 0)
goto fail;
offset += name_size;
}
/* update the various header fields */
data64 = cpu_to_be64(snapshots_offset);
if (bdrv_pwrite(s->hd, offsetof(QCowHeader, snapshots_offset),
&data64, sizeof(data64)) != sizeof(data64))
if (bdrv_pwrite_sync(s->hd, offsetof(QCowHeader, snapshots_offset),
&data64, sizeof(data64)) < 0)
goto fail;
data32 = cpu_to_be32(s->nb_snapshots);
if (bdrv_pwrite(s->hd, offsetof(QCowHeader, nb_snapshots),
&data32, sizeof(data32)) != sizeof(data32))
if (bdrv_pwrite_sync(s->hd, offsetof(QCowHeader, nb_snapshots),
&data32, sizeof(data32)) < 0)
goto fail;
/* free the old snapshot table */
@@ -284,9 +284,8 @@ int qcow2_snapshot_create(BlockDriverState *bs, QEMUSnapshotInfo *sn_info)
for(i = 0; i < s->l1_size; i++) {
l1_table[i] = cpu_to_be64(s->l1_table[i]);
}
if (bdrv_pwrite(s->hd, sn->l1_table_offset,
l1_table, s->l1_size * sizeof(uint64_t)) !=
(s->l1_size * sizeof(uint64_t)))
if (bdrv_pwrite_sync(s->hd, sn->l1_table_offset,
l1_table, s->l1_size * sizeof(uint64_t)) < 0)
goto fail;
qemu_free(l1_table);
l1_table = NULL;
@@ -335,8 +334,8 @@ int qcow2_snapshot_goto(BlockDriverState *bs, const char *snapshot_id)
if (bdrv_pread(s->hd, sn->l1_table_offset,
s->l1_table, l1_size2) != l1_size2)
goto fail;
if (bdrv_pwrite(s->hd, s->l1_table_offset,
s->l1_table, l1_size2) != l1_size2)
if (bdrv_pwrite_sync(s->hd, s->l1_table_offset,
s->l1_table, l1_size2) < 0)
goto fail;
for(i = 0;i < s->l1_size; i++) {
be64_to_cpus(&s->l1_table[i]);
+32 -9
View File
@@ -747,10 +747,11 @@ static int qcow_create2(const char *filename, int64_t total_size,
{
int fd, header_size, backing_filename_len, l1_size, i, shift, l2_bits;
int ref_clusters, backing_format_len = 0;
int ref_clusters, reftable_clusters, backing_format_len = 0;
int rounded_ext_bf_len = 0;
QCowHeader header;
uint64_t tmp, offset;
uint64_t old_ref_clusters;
QCowCreateState s1, *s = &s1;
QCowExtension ext_bf = {0, 0};
@@ -809,17 +810,37 @@ static int qcow_create2(const char *filename, int64_t total_size,
header.l1_size = cpu_to_be32(l1_size);
offset += align_offset(l1_size * sizeof(uint64_t), s->cluster_size);
s->refcount_table = qemu_mallocz(s->cluster_size);
/* count how many refcount blocks needed */
#define NUM_CLUSTERS(bytes) \
(((bytes) + (s->cluster_size) - 1) / (s->cluster_size))
ref_clusters = NUM_CLUSTERS(NUM_CLUSTERS(offset) * sizeof(uint16_t));
do {
uint64_t image_clusters;
old_ref_clusters = ref_clusters;
/* Number of clusters used for the refcount table */
reftable_clusters = NUM_CLUSTERS(ref_clusters * sizeof(uint64_t));
/* Number of clusters that the whole image will have */
image_clusters = NUM_CLUSTERS(offset) + ref_clusters
+ reftable_clusters;
/* Number of refcount blocks needed for the image */
ref_clusters = NUM_CLUSTERS(image_clusters * sizeof(uint16_t));
} while (ref_clusters != old_ref_clusters);
s->refcount_table = qemu_mallocz(reftable_clusters * s->cluster_size);
s->refcount_table_offset = offset;
header.refcount_table_offset = cpu_to_be64(offset);
header.refcount_table_clusters = cpu_to_be32(1);
offset += s->cluster_size;
header.refcount_table_clusters = cpu_to_be32(reftable_clusters);
offset += (reftable_clusters * s->cluster_size);
s->refcount_block_offset = offset;
/* count how many refcount blocks needed */
tmp = offset >> s->cluster_bits;
ref_clusters = (tmp >> (s->cluster_bits - REFCOUNT_SHIFT)) + 1;
for (i=0; i < ref_clusters; i++) {
s->refcount_table[i] = cpu_to_be64(offset);
offset += s->cluster_size;
@@ -831,7 +852,8 @@ static int qcow_create2(const char *filename, int64_t total_size,
qcow2_create_refcount_update(s, 0, header_size);
qcow2_create_refcount_update(s, s->l1_table_offset,
l1_size * sizeof(uint64_t));
qcow2_create_refcount_update(s, s->refcount_table_offset, s->cluster_size);
qcow2_create_refcount_update(s, s->refcount_table_offset,
reftable_clusters * s->cluster_size);
qcow2_create_refcount_update(s, s->refcount_block_offset,
ref_clusters * s->cluster_size);
@@ -859,7 +881,8 @@ static int qcow_create2(const char *filename, int64_t total_size,
write(fd, &tmp, sizeof(tmp));
}
lseek(fd, s->refcount_table_offset, SEEK_SET);
write(fd, s->refcount_table, s->cluster_size);
write(fd, s->refcount_table,
reftable_clusters * s->cluster_size);
lseek(fd, s->refcount_block_offset, SEEK_SET);
write(fd, s->refcount_block, ref_clusters * s->cluster_size);
+15 -3
View File
@@ -399,6 +399,15 @@ static int vdi_open(BlockDriverState *bs, const char *filename, int flags)
vdi_header_print(&header);
#endif
if (header.disk_size % SECTOR_SIZE != 0) {
/* 'VBoxManage convertfromraw' can create images with odd disk sizes.
We accept them but round the disk size to the next multiple of
SECTOR_SIZE. */
logout("odd disk size %" PRIu64 " B, round up\n", header.disk_size);
header.disk_size += SECTOR_SIZE - 1;
header.disk_size &= ~(SECTOR_SIZE - 1);
}
if (header.version != VDI_VERSION_1_1) {
logout("unsupported version %u.%u\n",
header.version >> 16, header.version & 0xffff);
@@ -417,9 +426,9 @@ static int vdi_open(BlockDriverState *bs, const char *filename, int flags)
} else if (header.block_size != 1 * MiB) {
logout("unsupported block size %u B\n", header.block_size);
goto fail;
} else if (header.disk_size !=
} else if (header.disk_size >
(uint64_t)header.blocks_in_image * header.block_size) {
logout("unexpected block number %u B\n", header.blocks_in_image);
logout("unsupported disk size %" PRIu64 " B\n", header.disk_size);
goto fail;
} else if (!uuid_is_null(header.uuid_link)) {
logout("link uuid != 0, unsupported\n");
@@ -831,7 +840,10 @@ static int vdi_create(const char *filename, QEMUOptionParameter *options)
return -errno;
}
blocks = bytes / block_size;
/* We need enough blocks to store the given disk size,
so always round up. */
blocks = (bytes + block_size - 1) / block_size;
bmap_size = blocks * sizeof(uint32_t);
bmap_size = ((bmap_size + SECTOR_SIZE - 1) & ~(SECTOR_SIZE -1));
+17 -30
View File
@@ -87,14 +87,6 @@ typedef struct VmdkMetaData {
int valid;
} VmdkMetaData;
typedef struct ActiveBDRVState{
BlockDriverState *hd; // active image handler
uint64_t cluster_offset; // current write offset
}ActiveBDRVState;
static ActiveBDRVState activeBDRV;
static int vmdk_probe(const uint8_t *buf, int buf_size, const char *filename)
{
uint32_t magic;
@@ -161,7 +153,7 @@ static int vmdk_write_cid(BlockDriverState *bs, uint32_t cid)
pstrcat(desc, sizeof(desc), tmp_desc);
}
if (bdrv_pwrite(s->hd, 0x200, desc, DESC_SIZE) != DESC_SIZE)
if (bdrv_pwrite_sync(s->hd, 0x200, desc, DESC_SIZE) < 0)
return -1;
return 0;
}
@@ -285,7 +277,6 @@ static int vmdk_snapshot_create(const char *filename, const char *backing_file)
goto fail_rgd;
if (write(snp_fd, rgd_buf, gd_size) == -1)
goto fail_rgd;
qemu_free(rgd_buf);
/* write GD */
gd_buf = qemu_malloc(gd_size);
@@ -298,6 +289,7 @@ static int vmdk_snapshot_create(const char *filename, const char *backing_file)
if (write(snp_fd, gd_buf, gd_size) == -1)
goto fail_gd;
qemu_free(gd_buf);
qemu_free(rgd_buf);
close(p_fd);
close(snp_fd);
@@ -458,30 +450,28 @@ static uint64_t get_cluster_offset(BlockDriverState *bs, VmdkMetaData *m_data,
static int get_whole_cluster(BlockDriverState *bs, uint64_t cluster_offset,
uint64_t offset, int allocate)
{
uint64_t parent_cluster_offset;
BDRVVmdkState *s = bs->opaque;
uint8_t whole_grain[s->cluster_sectors*512]; // 128 sectors * 512 bytes each = grain size 64KB
// we will be here if it's first write on non-exist grain(cluster).
// try to read from parent image, if exist
if (bs->backing_hd) {
BDRVVmdkState *ps = bs->backing_hd->opaque;
int ret;
if (!vmdk_is_cid_valid(bs))
return -1;
parent_cluster_offset = get_cluster_offset(bs->backing_hd, NULL,
offset, allocate);
ret = bdrv_read(bs->backing_hd, offset >> 9, whole_grain,
s->cluster_sectors);
if (ret < 0) {
return -1;
}
if (parent_cluster_offset) {
BDRVVmdkState *act_s = activeBDRV.hd->opaque;
if (bdrv_pread(ps->hd, parent_cluster_offset, whole_grain, ps->cluster_sectors*512) != ps->cluster_sectors*512)
return -1;
//Write grain only into the active image
if (bdrv_pwrite(act_s->hd, activeBDRV.cluster_offset << 9, whole_grain, sizeof(whole_grain)) != sizeof(whole_grain))
return -1;
//Write grain only into the active image
ret = bdrv_write(s->hd, cluster_offset, whole_grain,
s->cluster_sectors);
if (ret < 0) {
return -1;
}
}
return 0;
@@ -492,14 +482,14 @@ static int vmdk_L2update(BlockDriverState *bs, VmdkMetaData *m_data)
BDRVVmdkState *s = bs->opaque;
/* update L2 table */
if (bdrv_pwrite(s->hd, ((int64_t)m_data->l2_offset * 512) + (m_data->l2_index * sizeof(m_data->offset)),
&(m_data->offset), sizeof(m_data->offset)) != sizeof(m_data->offset))
if (bdrv_pwrite_sync(s->hd, ((int64_t)m_data->l2_offset * 512) + (m_data->l2_index * sizeof(m_data->offset)),
&(m_data->offset), sizeof(m_data->offset)) < 0)
return -1;
/* update backup L2 table */
if (s->l1_backup_table_offset != 0) {
m_data->l2_offset = s->l1_backup_table[m_data->l1_index];
if (bdrv_pwrite(s->hd, ((int64_t)m_data->l2_offset * 512) + (m_data->l2_index * sizeof(m_data->offset)),
&(m_data->offset), sizeof(m_data->offset)) != sizeof(m_data->offset))
if (bdrv_pwrite_sync(s->hd, ((int64_t)m_data->l2_offset * 512) + (m_data->l2_index * sizeof(m_data->offset)),
&(m_data->offset), sizeof(m_data->offset)) < 0)
return -1;
}
@@ -567,9 +557,6 @@ static uint64_t get_cluster_offset(BlockDriverState *bs, VmdkMetaData *m_data,
cluster_offset >>= 9;
tmp = cpu_to_le32(cluster_offset);
l2_table[l2_index] = tmp;
// Save the active image state
activeBDRV.cluster_offset = cluster_offset;
activeBDRV.hd = bs;
}
/* First of all we write grain itself, to avoid race condition
* that may to corrupt the image.
+17 -13
View File
@@ -266,7 +266,7 @@ static inline int64_t get_sector_offset(BlockDriverState *bs,
s->last_bitmap_offset = bitmap_offset;
memset(bitmap, 0xff, s->bitmap_size);
bdrv_pwrite(s->hd, bitmap_offset, bitmap, s->bitmap_size);
bdrv_pwrite_sync(s->hd, bitmap_offset, bitmap, s->bitmap_size);
}
// printf("sector: %" PRIx64 ", index: %x, offset: %x, bioff: %" PRIx64 ", bloff: %" PRIx64 "\n",
@@ -316,7 +316,7 @@ static int rewrite_footer(BlockDriverState* bs)
BDRVVPCState *s = bs->opaque;
int64_t offset = s->free_data_block_offset;
ret = bdrv_pwrite(s->hd, offset, s->footer_buf, HEADER_SIZE);
ret = bdrv_pwrite_sync(s->hd, offset, s->footer_buf, HEADER_SIZE);
if (ret < 0)
return ret;
@@ -351,7 +351,8 @@ static int64_t alloc_block(BlockDriverState* bs, int64_t sector_num)
// Initialize the block's bitmap
memset(bitmap, 0xff, s->bitmap_size);
bdrv_pwrite(s->hd, s->free_data_block_offset, bitmap, s->bitmap_size);
bdrv_pwrite_sync(s->hd, s->free_data_block_offset, bitmap,
s->bitmap_size);
// Write new footer (the old one will be overwritten)
s->free_data_block_offset += s->block_size + s->bitmap_size;
@@ -362,7 +363,7 @@ static int64_t alloc_block(BlockDriverState* bs, int64_t sector_num)
// Write BAT entry to disk
bat_offset = s->bat_offset + (4 * index);
bat_value = be32_to_cpu(s->pagetable[index]);
ret = bdrv_pwrite(s->hd, bat_offset, &bat_value, 4);
ret = bdrv_pwrite_sync(s->hd, bat_offset, &bat_value, 4);
if (ret < 0)
goto fail;
@@ -470,9 +471,7 @@ static int calculate_geometry(int64_t total_sectors, uint16_t* cyls,
}
}
// Note: Rounding up deviates from the Virtual PC behaviour
// However, we need this to avoid truncating images in qemu-img convert
*cyls = (cyls_times_heads + *heads - 1) / *heads;
*cyls = cyls_times_heads / *heads;
return 0;
}
@@ -484,9 +483,9 @@ static int vpc_create(const char *filename, QEMUOptionParameter *options)
struct vhd_dyndisk_header* dyndisk_header =
(struct vhd_dyndisk_header*) buf;
int fd, i;
uint16_t cyls;
uint8_t heads;
uint8_t secs_per_cyl;
uint16_t cyls = 0;
uint8_t heads = 0;
uint8_t secs_per_cyl = 0;
size_t block_size, num_bat_entries;
int64_t total_sectors = 0;
@@ -503,9 +502,14 @@ static int vpc_create(const char *filename, QEMUOptionParameter *options)
if (fd < 0)
return -EIO;
// Calculate matching total_size and geometry
if (calculate_geometry(total_sectors, &cyls, &heads, &secs_per_cyl))
return -EFBIG;
/* Calculate matching total_size and geometry. Increase the number of
sectors requested until we get enough (or fail). */
for (i = 0; total_sectors > (int64_t)cyls * heads * secs_per_cyl; i++) {
if (calculate_geometry(total_sectors + i,
&cyls, &heads, &secs_per_cyl)) {
return -EFBIG;
}
}
total_sectors = (int64_t) cyls * heads * secs_per_cyl;
// Prepare the Hard Disk Footer
+7 -2
View File
@@ -868,7 +868,8 @@ static int init_directories(BDRVVVFATState* s,
{
direntry_t* entry=array_get_next(&(s->directory));
entry->attributes=0x28; /* archive | volume label */
snprintf((char*)entry->name,11,"QEMU VVFAT");
memcpy(entry->name,"QEMU VVF",8);
memcpy(entry->extension,"AT ",3);
}
/* Now build FAT, and write back information into directory */
@@ -2256,7 +2257,11 @@ static int commit_one_file(BDRVVVFATState* s,
c = c1;
}
ftruncate(fd, size);
if (ftruncate(fd, size)) {
perror("ftruncate()");
close(fd);
return -4;
}
close(fd);
return commit_mappings(s, first_cluster, dir_index);
+1
View File
@@ -127,6 +127,7 @@ struct BlockDriverState {
int64_t total_sectors; /* if we are reading a disk image, give its
size in sectors */
int read_only; /* if true, the media is read only */
int open_flags; /* flags used to open the file, re-used for re-open */
int removable; /* if true, the media can be removed */
int locked; /* if true, the media cannot temporarily be ejected */
int encrypted; /* if true, the media is encrypted */
+2 -2
View File
@@ -71,7 +71,7 @@ static void arm_timer_recalibrate(arm_timer_state *s, int reload)
{
uint32_t limit;
if ((s->control & TIMER_CTRL_PERIODIC) == 0) {
if ((s->control & (TIMER_CTRL_PERIODIC | TIMER_CTRL_ONESHOT)) == 0) {
/* Free running. */
if (s->control & TIMER_CTRL_32BIT)
limit = 0xffffffff;
@@ -113,7 +113,7 @@ static void arm_timer_write(void *opaque, target_phys_addr_t offset,
case 1: freq >>= 4; break;
case 2: freq >>= 8; break;
}
arm_timer_recalibrate(s, 0);
arm_timer_recalibrate(s, s->control & TIMER_CTRL_ENABLE);
ptimer_set_freq(s->timer, freq);
if (s->control & TIMER_CTRL_ENABLE) {
/* Restart the timer if still enabled. */
+2 -2
View File
@@ -370,9 +370,9 @@ enum {
FD_CMD_PART_ID = 0x18,
FD_CMD_SCAN_LOW_OR_EQUAL = 0x19,
FD_CMD_SCAN_HIGH_OR_EQUAL = 0x1d,
FD_CMD_SAVE = 0x2c,
FD_CMD_SAVE = 0x2e,
FD_CMD_OPTION = 0x33,
FD_CMD_RESTORE = 0x4c,
FD_CMD_RESTORE = 0x4e,
FD_CMD_DRIVE_SPECIFICATION_COMMAND = 0x8e,
FD_CMD_RELATIVE_SEEK_OUT = 0x8f,
FD_CMD_FORMAT_AND_WRITE = 0xcd,
+8 -5
View File
@@ -1,17 +1,18 @@
#ifndef HW_IDE_H
#define HW_IDE_H
#include "qdev.h"
#include "isa.h"
#include "pci.h"
/* ide-isa.c */
int isa_ide_init(int iobase, int iobase2, int isairq,
DriveInfo *hd0, DriveInfo *hd1);
ISADevice *isa_ide_init(int iobase, int iobase2, int isairq,
DriveInfo *hd0, DriveInfo *hd1);
/* ide-pci.c */
void pci_cmd646_ide_init(PCIBus *bus, DriveInfo **hd_table,
int secondary_ide_enabled);
void pci_piix3_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn);
void pci_piix4_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn);
PCIDevice *pci_piix3_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn);
PCIDevice *pci_piix4_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn);
/* ide-macio.c */
int pmac_ide_init (DriveInfo **hd_table, qemu_irq irq,
@@ -22,4 +23,6 @@ void mmio_ide_init (target_phys_addr_t membase, target_phys_addr_t membase2,
qemu_irq irq, int shift,
DriveInfo *hd0, DriveInfo *hd1);
void ide_get_bs(BlockDriverState *bs[], BusState *qbus);
#endif /* HW_IDE_H */
+4 -4
View File
@@ -2827,10 +2827,6 @@ static void ide_dma_restart(IDEState *s, int is_read)
void ide_dma_cancel(BMDMAState *bm)
{
if (bm->status & BM_STATUS_DMAING) {
bm->status &= ~BM_STATUS_DMAING;
/* cancel DMA request */
bm->unit = -1;
bm->dma_cb = NULL;
if (bm->aiocb) {
#ifdef DEBUG_AIO
printf("aio_cancel\n");
@@ -2838,6 +2834,10 @@ void ide_dma_cancel(BMDMAState *bm)
bdrv_aio_cancel(bm->aiocb);
bm->aiocb = NULL;
}
bm->status &= ~BM_STATUS_DMAING;
/* cancel DMA request */
bm->unit = -1;
bm->dma_cb = NULL;
}
}
+4 -4
View File
@@ -75,8 +75,8 @@ static int isa_ide_initfn(ISADevice *dev)
return 0;
};
int isa_ide_init(int iobase, int iobase2, int isairq,
DriveInfo *hd0, DriveInfo *hd1)
ISADevice *isa_ide_init(int iobase, int iobase2, int isairq,
DriveInfo *hd0, DriveInfo *hd1)
{
ISADevice *dev;
ISAIDEState *s;
@@ -86,14 +86,14 @@ int isa_ide_init(int iobase, int iobase2, int isairq,
qdev_prop_set_uint32(&dev->qdev, "iobase2", iobase2);
qdev_prop_set_uint32(&dev->qdev, "irq", isairq);
if (qdev_init(&dev->qdev) < 0)
return -1;
return NULL;
s = DO_UPCAST(ISAIDEState, dev, dev);
if (hd0)
ide_create_drive(&s->bus, 0, hd0);
if (hd1)
ide_create_drive(&s->bus, 1, hd1);
return 0;
return dev;
}
static ISADeviceInfo isa_ide_info = {
+4 -2
View File
@@ -158,22 +158,24 @@ static int pci_piix4_ide_initfn(PCIDevice *dev)
/* hd_table must contain 4 block drivers */
/* NOTE: for the PIIX3, the IRQs and IOports are hardcoded */
void pci_piix3_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn)
PCIDevice *pci_piix3_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn)
{
PCIDevice *dev;
dev = pci_create_simple(bus, devfn, "piix3-ide");
pci_ide_create_devs(dev, hd_table);
return dev;
}
/* hd_table must contain 4 block drivers */
/* NOTE: for the PIIX4, the IRQs and IOports are hardcoded */
void pci_piix4_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn)
PCIDevice *pci_piix4_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn)
{
PCIDevice *dev;
dev = pci_create_simple(bus, devfn, "piix4-ide");
pci_ide_create_devs(dev, hd_table);
return dev;
}
static PCIDeviceInfo piix_ide_info[] = {
+7
View File
@@ -90,6 +90,13 @@ IDEDevice *ide_create_drive(IDEBus *bus, int unit, DriveInfo *drive)
return DO_UPCAST(IDEDevice, qdev, dev);
}
void ide_get_bs(BlockDriverState *bs[], BusState *qbus)
{
IDEBus *bus = DO_UPCAST(IDEBus, qbus, qbus);
bs[0] = bus->master ? bus->master->dinfo->bdrv : NULL;
bs[1] = bus->slave ? bus->slave->dinfo->bdrv : NULL;
}
/* --------------------------------- */
typedef struct IDEDrive {
+68 -37
View File
@@ -24,6 +24,7 @@
#include "hw.h"
#include "pc.h"
#include "fdc.h"
#include "ide.h"
#include "pci.h"
#include "vmware_vga.h"
#include "usb-uhci.h"
@@ -244,15 +245,66 @@ static int pc_boot_set(void *opaque, const char *boot_device)
return(0);
}
/* hd_table must contain 4 block drivers */
typedef struct pc_cmos_init_late_arg {
BusState *idebus0, *idebus1;
} pc_cmos_init_late_arg;
static void pc_cmos_init_late(void *opaque)
{
pc_cmos_init_late_arg *arg = opaque;
RTCState *s = rtc_state;
int val;
BlockDriverState *hd_table[4];
int i;
ide_get_bs(hd_table, arg->idebus0);
ide_get_bs(hd_table + 2, arg->idebus1);
rtc_set_memory(s, 0x12, (hd_table[0] ? 0xf0 : 0) | (hd_table[1] ? 0x0f : 0));
if (hd_table[0])
cmos_init_hd(0x19, 0x1b, hd_table[0]);
if (hd_table[1])
cmos_init_hd(0x1a, 0x24, hd_table[1]);
val = 0;
for (i = 0; i < 4; i++) {
if (hd_table[i]) {
int cylinders, heads, sectors, translation;
/* NOTE: bdrv_get_geometry_hint() returns the physical
geometry. It is always such that: 1 <= sects <= 63, 1
<= heads <= 16, 1 <= cylinders <= 16383. The BIOS
geometry can be different if a translation is done. */
translation = bdrv_get_translation_hint(hd_table[i]);
if (translation == BIOS_ATA_TRANSLATION_AUTO) {
bdrv_get_geometry_hint(hd_table[i], &cylinders, &heads, &sectors);
if (cylinders <= 1024 && heads <= 16 && sectors <= 63) {
/* No translation. */
translation = 0;
} else {
/* LBA translation. */
translation = 1;
}
} else {
translation--;
}
val |= translation << (i * 2);
}
}
rtc_set_memory(s, 0x39, val);
qemu_unregister_reset(pc_cmos_init_late, opaque);
}
static void cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
const char *boot_device, DriveInfo **hd_table)
const char *boot_device,
BusState *idebus0, BusState *idebus1)
{
RTCState *s = rtc_state;
int nbds, bds[3] = { 0, };
int val;
int fd0, fd1, nb;
int i;
static pc_cmos_init_late_arg arg;
/* various important CMOS locations needed by PC/Bochs bios */
@@ -335,37 +387,9 @@ static void cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
/* hard drives */
rtc_set_memory(s, 0x12, (hd_table[0] ? 0xf0 : 0) | (hd_table[1] ? 0x0f : 0));
if (hd_table[0])
cmos_init_hd(0x19, 0x1b, hd_table[0]->bdrv);
if (hd_table[1])
cmos_init_hd(0x1a, 0x24, hd_table[1]->bdrv);
val = 0;
for (i = 0; i < 4; i++) {
if (hd_table[i]) {
int cylinders, heads, sectors, translation;
/* NOTE: bdrv_get_geometry_hint() returns the physical
geometry. It is always such that: 1 <= sects <= 63, 1
<= heads <= 16, 1 <= cylinders <= 16383. The BIOS
geometry can be different if a translation is done. */
translation = bdrv_get_translation_hint(hd_table[i]->bdrv);
if (translation == BIOS_ATA_TRANSLATION_AUTO) {
bdrv_get_geometry_hint(hd_table[i]->bdrv, &cylinders, &heads, &sectors);
if (cylinders <= 1024 && heads <= 16 && sectors <= 63) {
/* No translation. */
translation = 0;
} else {
/* LBA translation. */
translation = 1;
}
} else {
translation--;
}
val |= translation << (i * 2);
}
}
rtc_set_memory(s, 0x39, val);
arg.idebus0 = idebus0;
arg.idebus1 = idebus1;
qemu_register_reset(pc_cmos_init_late, &arg);
}
void ioport_set_a20(int enable)
@@ -994,6 +1018,7 @@ static void pc_init1(ram_addr_t ram_size,
qemu_irq *i8259;
IsaIrqState *isa_irq_state;
DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
BusState *idebus[MAX_IDE_BUS];
DriveInfo *fd[MAX_FD];
void *fw_cfg;
@@ -1187,11 +1212,16 @@ static void pc_init1(ram_addr_t ram_size,
}
if (pci_enabled) {
pci_piix3_ide_init(pci_bus, hd, piix3_devfn + 1);
PCIDevice *dev;
dev = pci_piix3_ide_init(pci_bus, hd, piix3_devfn + 1);
idebus[0] = qdev_get_child_bus(&dev->qdev, "ide.0");
idebus[1] = qdev_get_child_bus(&dev->qdev, "ide.1");
} else {
for(i = 0; i < MAX_IDE_BUS; i++) {
isa_ide_init(ide_iobase[i], ide_iobase2[i], ide_irq[i],
hd[MAX_IDE_DEVS * i], hd[MAX_IDE_DEVS * i + 1]);
ISADevice *dev;
dev = isa_ide_init(ide_iobase[i], ide_iobase2[i], ide_irq[i],
hd[MAX_IDE_DEVS * i], hd[MAX_IDE_DEVS * i + 1]);
idebus[i] = qdev_get_child_bus(&dev->qdev, "ide.0");
}
}
@@ -1206,7 +1236,8 @@ static void pc_init1(ram_addr_t ram_size,
}
floppy_controller = fdctrl_init_isa(fd);
cmos_init(below_4g_mem_size, above_4g_mem_size, boot_device, hd);
cmos_init(below_4g_mem_size, above_4g_mem_size, boot_device,
idebus[0], idebus[1]);
if (pci_enabled && usb_enabled) {
usb_uhci_piix3_init(pci_bus, piix3_devfn + 2);
+2 -2
View File
@@ -317,7 +317,7 @@ static VMStateInfo vmstate_info_pci_config = {
static int get_pci_irq_state(QEMUFile *f, void *pv, size_t size)
{
PCIDevice *s = container_of(pv, PCIDevice, config);
PCIDevice *s = container_of(pv, PCIDevice, irq_state);
uint32_t irq_state[PCI_NUM_PINS];
int i;
for (i = 0; i < PCI_NUM_PINS; ++i) {
@@ -339,7 +339,7 @@ static int get_pci_irq_state(QEMUFile *f, void *pv, size_t size)
static void put_pci_irq_state(QEMUFile *f, void *pv, size_t size)
{
int i;
PCIDevice *s = container_of(pv, PCIDevice, config);
PCIDevice *s = container_of(pv, PCIDevice, irq_state);
for (i = 0; i < PCI_NUM_PINS; ++i) {
qemu_put_be32(f, pci_irq_state(s, i));
+7 -2
View File
@@ -102,6 +102,9 @@ USBDevice *usb_create(USBBus *bus, const char *name)
USBDevice *usb_create_simple(USBBus *bus, const char *name)
{
USBDevice *dev = usb_create(bus, name);
if (!dev) {
hw_error("Failed to create USB device '%s'\n", name);
}
qdev_init_nofail(&dev->qdev);
return dev;
}
@@ -261,7 +264,8 @@ USBDevice *usbdevice_create(const char *cmdline)
USBBus *bus = usb_bus_find(-1 /* any */);
DeviceInfo *info;
USBDeviceInfo *usb;
char driver[32], *params;
char driver[32];
const char *params;
int len;
params = strchr(cmdline,':');
@@ -272,6 +276,7 @@ USBDevice *usbdevice_create(const char *cmdline)
len = sizeof(driver);
pstrcpy(driver, len, cmdline);
} else {
params = "";
pstrcpy(driver, sizeof(driver), cmdline);
}
@@ -294,7 +299,7 @@ USBDevice *usbdevice_create(const char *cmdline)
}
if (!usb->usbdevice_init) {
if (params) {
if (*params) {
qemu_error("usbdevice %s accepts no params\n", driver);
return NULL;
}
+3
View File
@@ -592,6 +592,9 @@ static USBDevice *usb_msd_init(const char *filename)
/* create guest device */
dev = usb_create(NULL /* FIXME */, "usb-storage");
if (!dev) {
return NULL;
}
qdev_prop_set_drive(&dev->qdev, "drive", dinfo);
if (qdev_init(&dev->qdev) < 0)
return NULL;
+3
View File
@@ -1491,6 +1491,9 @@ static USBDevice *usb_net_init(const char *cmdline)
}
dev = usb_create(NULL /* FIXME */, "usb-net");
if (!dev) {
return NULL;
}
qdev_set_nic_properties(&dev->qdev, &nd_table[idx]);
qdev_init_nofail(&dev->qdev);
return dev;
+3
View File
@@ -594,6 +594,9 @@ static USBDevice *usb_serial_init(const char *filename)
return NULL;
dev = usb_create(NULL /* FIXME */, "usb-serial");
if (!dev) {
return NULL;
}
qdev_prop_set_chr(&dev->qdev, "chardev", cdrv);
if (vendorid)
qdev_prop_set_uint16(&dev->qdev, "vendorid", vendorid);
+13 -2
View File
@@ -278,10 +278,20 @@ static void do_multiwrite(BlockDriverState *bs, BlockRequest *blkreq,
}
}
static void virtio_blk_handle_flush(VirtIOBlockReq *req)
static void virtio_blk_handle_flush(BlockRequest *blkreq, int *num_writes,
VirtIOBlockReq *req, BlockDriverState **old_bs)
{
BlockDriverAIOCB *acb;
/*
* Make sure all outstanding writes are posted to the backing device.
*/
if (*old_bs != NULL) {
do_multiwrite(*old_bs, blkreq, *num_writes);
}
*num_writes = 0;
*old_bs = req->dev->bs;
acb = bdrv_aio_flush(req->dev->bs, virtio_blk_flush_complete, req);
if (!acb) {
virtio_blk_req_complete(req, VIRTIO_BLK_S_IOERR);
@@ -344,7 +354,8 @@ static void virtio_blk_handle_request(VirtIOBlockReq *req,
req->in = (void *)req->elem.in_sg[req->elem.in_num - 1].iov_base;
if (req->out->type & VIRTIO_BLK_T_FLUSH) {
virtio_blk_handle_flush(req);
virtio_blk_handle_flush(mrb->blkreq, &mrb->num_writes,
req, &mrb->old_bs);
} else if (req->out->type & VIRTIO_BLK_T_SCSI_CMD) {
virtio_blk_handle_scsi(req);
} else if (req->out->type & VIRTIO_BLK_T_OUT) {
+14 -2
View File
@@ -39,8 +39,20 @@ SECTIONS
.rela.fini : { *(.rela.fini) }
.rel.bss : { *(.rel.bss) }
.rela.bss : { *(.rela.bss) }
.rel.plt : { *(.rel.plt) }
.rela.plt : { *(.rela.plt) }
.rel.plt :
{
*(.rel.plt)
PROVIDE_HIDDEN (__rel_iplt_start = .);
*(.rel.iplt)
PROVIDE_HIDDEN (__rel_iplt_end = .);
}
.rela.plt :
{
*(.rela.plt)
PROVIDE_HIDDEN (__rela_iplt_start = .);
*(.rela.iplt)
PROVIDE_HIDDEN (__rela_iplt_end = .);
}
.init : { *(.init) } =0x47ff041f
.text :
{
+4 -4
View File
@@ -106,10 +106,10 @@ copy_kernel:
/* We're now running in 16-bit CS, but 32-bit ES! */
/* Load kernel and initrd */
read_fw_blob(FW_CFG_KERNEL)
read_fw_blob(FW_CFG_INITRD)
read_fw_blob(FW_CFG_CMDLINE)
read_fw_blob(FW_CFG_SETUP)
read_fw_blob_addr32(FW_CFG_KERNEL)
read_fw_blob_addr32(FW_CFG_INITRD)
read_fw_blob_addr32(FW_CFG_CMDLINE)
read_fw_blob_addr32(FW_CFG_SETUP)
/* And now jump into Linux! */
mov $0, %eax
+24 -8
View File
@@ -50,13 +50,7 @@
bswap %eax
.endm
/*
* Read a blob from the fw_cfg device.
* Requires _ADDR, _SIZE and _DATA values for the parameter.
*
* Clobbers: %eax, %edx, %es, %ecx, %edi
*/
#define read_fw_blob(var) \
#define read_fw_blob_pre(var) \
read_fw var ## _ADDR; \
mov %eax, %edi; \
read_fw var ## _SIZE; \
@@ -65,10 +59,32 @@
mov $BIOS_CFG_IOPORT_CFG, %edx; \
outw %ax, (%dx); \
mov $BIOS_CFG_IOPORT_DATA, %dx; \
cld; \
cld
/*
* Read a blob from the fw_cfg device.
* Requires _ADDR, _SIZE and _DATA values for the parameter.
*
* Clobbers: %eax, %edx, %es, %ecx, %edi
*/
#define read_fw_blob(var) \
read_fw_blob_pre(var); \
/* old as(1) doesn't like this insn so emit the bytes instead: \
rep insb (%dx), %es:(%edi); \
*/ \
.dc.b 0xf3,0x6c
/*
* Read a blob from the fw_cfg device in forced addr32 mode.
* Requires _ADDR, _SIZE and _DATA values for the parameter.
*
* Clobbers: %eax, %edx, %es, %ecx, %edi
*/
#define read_fw_blob_addr32(var) \
read_fw_blob_pre(var); \
/* old as(1) doesn't like this insn so emit the bytes instead: \
addr32 rep insb (%dx), %es:(%edi); \
*/ \
.dc.b 0x67,0xf3,0x6c
#define OPTION_ROM_START \
+3 -1
View File
@@ -537,7 +537,7 @@ static int img_convert(int argc, char **argv)
BlockDriverState **bs, *out_bs;
int64_t total_sectors, nb_sectors, sector_num, bs_offset;
uint64_t bs_sectors;
uint8_t buf[IO_BUF_SIZE];
uint8_t * buf;
const uint8_t *buf1;
BlockDriverInfo bdi;
QEMUOptionParameter *param = NULL;
@@ -656,6 +656,7 @@ static int img_convert(int argc, char **argv)
bs_i = 0;
bs_offset = 0;
bdrv_get_geometry(bs[0], &bs_sectors);
buf = qemu_malloc(IO_BUF_SIZE);
if (flags & BLOCK_FLAG_COMPRESS) {
if (bdrv_get_info(out_bs, &bdi) < 0)
@@ -788,6 +789,7 @@ static int img_convert(int argc, char **argv)
}
}
}
qemu_free(buf);
bdrv_delete(out_bs);
for (bs_i = 0; bs_i < bs_n; bs_i++)
bdrv_delete(bs[bs_i]);
+1 -1
View File
@@ -888,7 +888,7 @@ ETEXI
.name = "balloon",
.args_type = "value:M",
.params = "target",
.help = "request VM to change it's memory allocation (in MB)",
.help = "request VM to change its memory allocation (in MB)",
.user_print = monitor_user_noop,
.mhandler.cmd_new = do_balloon,
},
+8 -4
View File
@@ -1114,7 +1114,7 @@ DEF("chardev", HAS_ARG, QEMU_OPTION_chardev,
"-chardev serial,id=id,path=path\n"
#else
"-chardev pty,id=id\n"
"-chardev stdio,id=id\n"
"-chardev stdio,id=id,[,signal=on|off]\n"
#endif
#ifdef CONFIG_BRLAPI
"-chardev braille,id=id\n"
@@ -1290,10 +1290,14 @@ not take any options.
@option{pty} is not available on Windows hosts.
@item -chardev stdio ,id=@var{id}
@item -chardev stdio ,id=@var{id} [,signal=on|off]
Connect to standard input and standard output of the qemu process.
@option{stdio} does not take any options. @option{stdio} is not available on
Windows hosts.
@option{signal} controls if signals are enabled on the terminal, that includes
exiting QEMU with the key sequence @key{Control-c}. This option is enabled by
default, use @option{signal=off} to disable it.
@option{stdio} is not available on Windows hosts.
@item -chardev braille ,id=@var{id}
+2 -1
View File
@@ -130,7 +130,8 @@ int inet_listen_opts(QemuOpts *opts, int port_offset)
ai.ai_family = PF_UNSPEC;
ai.ai_socktype = SOCK_STREAM;
if (qemu_opt_get(opts, "port") == NULL) {
if ((qemu_opt_get(opts, "host") == NULL) ||
(qemu_opt_get(opts, "port") == NULL)) {
fprintf(stderr, "%s: host and/or port not specified\n", __FUNCTION__);
return -1;
}
+2 -2
View File
@@ -2043,7 +2043,7 @@ static inline uint16_t add16_usat(uint16_t a, uint16_t b)
static inline uint16_t sub16_usat(uint16_t a, uint16_t b)
{
if (a < b)
if (a > b)
return a - b;
else
return 0;
@@ -2060,7 +2060,7 @@ static inline uint8_t add8_usat(uint8_t a, uint8_t b)
static inline uint8_t sub8_usat(uint8_t a, uint8_t b)
{
if (a < b)
if (a > b)
return a - b;
else
return 0;
+4 -4
View File
@@ -73,8 +73,8 @@ uint32_t HELPER(glue(PFX,subaddx))(uint32_t a, uint32_t b GE_ARG)
uint32_t res = 0;
DECLARE_GE;
ADD16(a, b, 0);
SUB16(a >> 16, b >> 16, 1);
ADD16(a, b >> 16, 0);
SUB16(a >> 16, b, 1);
SET_GE;
return res;
}
@@ -84,8 +84,8 @@ uint32_t HELPER(glue(PFX,addsubx))(uint32_t a, uint32_t b GE_ARG)
uint32_t res = 0;
DECLARE_GE;
SUB16(a, b, 0);
ADD16(a >> 16, b >> 16, 1);
SUB16(a, b >> 16, 0);
ADD16(a >> 16, b, 1);
SET_GE;
return res;
}
+2 -2
View File
@@ -561,7 +561,7 @@ static void gen_arm_parallel_addsub(int op1, int op2, TCGv a, TCGv b)
/* For unknown reasons Arm and Thumb-2 use arbitrarily different encodings. */
#define PAS_OP(pfx) \
switch (op2) { \
switch (op1) { \
case 0: gen_pas_helper(glue(pfx,add8)); break; \
case 1: gen_pas_helper(glue(pfx,add16)); break; \
case 2: gen_pas_helper(glue(pfx,addsubx)); break; \
@@ -573,7 +573,7 @@ static void gen_thumb2_parallel_addsub(int op1, int op2, TCGv a, TCGv b)
{
TCGv_ptr tmp;
switch (op1) {
switch (op2) {
#define gen_pas_helper(name) glue(gen_helper_,name)(a, a, b, tmp)
case 0:
tmp = tcg_temp_new_ptr();
+7 -2
View File
@@ -5296,6 +5296,7 @@ static target_ulong disas_insn(DisasContext *s, target_ulong pc_start)
break;
case 0x91 ... 0x97: /* xchg R, EAX */
do_xchg_reg_eax:
ot = dflag + OT_WORD;
reg = (b & 7) | REX_B(s);
rm = R_EAX;
@@ -6666,10 +6667,14 @@ static target_ulong disas_insn(DisasContext *s, target_ulong pc_start)
/************************/
/* misc */
case 0x90: /* nop */
/* XXX: xchg + rex handling */
/* XXX: correct lock test for all insn */
if (prefixes & PREFIX_LOCK)
if (prefixes & PREFIX_LOCK) {
goto illegal_op;
}
/* If REX_B is set, then this is xchg eax, r8d, not a nop. */
if (REX_B(s)) {
goto do_xchg_reg_eax;
}
if (prefixes & PREFIX_REPZ) {
gen_svm_check_intercept(s, pc_start, SVM_EXIT_PAUSE);
}
+1 -1
View File
@@ -2761,7 +2761,7 @@ static void gen_bitops (DisasContext *ctx, uint32_t opc, int rt,
case OPC_DINSU:
if (lsb > msb)
goto fail;
mask = ((1ULL << (msb - lsb + 1)) - 1) << lsb;
mask = ((1ULL << (msb - lsb + 1)) - 1) << (lsb + 32);
gen_load_gpr(t0, rt);
tcg_gen_andi_tl(t0, t0, ~mask);
tcg_gen_shli_tl(t1, t1, lsb + 32);
-1
View File
@@ -2066,7 +2066,6 @@ static inline void powerpc_excp(CPUState *env, int excp_model, int excp)
srr1 = SPR_SRR1;
asrr0 = -1;
asrr1 = -1;
msr &= ~((target_ulong)0x783F0000);
switch (excp) {
case POWERPC_EXCP_NONE:
/* Should never happen */
+3 -3
View File
@@ -1646,20 +1646,20 @@ static inline void do_rfi(target_ulong nip, target_ulong msr,
void helper_rfi (void)
{
do_rfi(env->spr[SPR_SRR0], env->spr[SPR_SRR1],
~((target_ulong)0x0), 1);
~((target_ulong)0x783F0000), 1);
}
#if defined(TARGET_PPC64)
void helper_rfid (void)
{
do_rfi(env->spr[SPR_SRR0], env->spr[SPR_SRR1],
~((target_ulong)0x0), 0);
~((target_ulong)0x783F0000), 0);
}
void helper_hrfid (void)
{
do_rfi(env->spr[SPR_HSRR0], env->spr[SPR_HSRR1],
~((target_ulong)0x0), 0);
~((target_ulong)0x783F0000), 0);
}
#endif
#endif
+14 -2
View File
@@ -35,8 +35,20 @@ SECTIONS
.rela.got : { *(.rela.got) }
.rel.bss : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
.rela.bss : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
.rel.plt : { *(.rel.plt) }
.rela.plt : { *(.rela.plt) }
.rel.plt :
{
*(.rel.plt)
PROVIDE_HIDDEN (__rel_iplt_start = .);
*(.rel.iplt)
PROVIDE_HIDDEN (__rel_iplt_end = .);
}
.rela.plt :
{
*(.rela.plt)
PROVIDE_HIDDEN (__rela_iplt_start = .);
*(.rela.iplt)
PROVIDE_HIDDEN (__rela_iplt_end = .);
}
.init :
{
KEEP (*(.init))