Compare commits

..
109 Commits
Author SHA1 Message Date
Michael Roth e22f675bdd Update version for 2.12.1 release
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-08-02 15:51:06 -05:00
Fam Zheng aae299a68d file-posix: Handle EINTR in preallocation=full write
Cc: qemu-stable@nongnu.org
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit a1c81f4f16)
 Conflicts:
	block/file-posix.c
* avoid dep on 93f4e2ff by adding check to raw_regular_truncate instead
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-31 11:54:59 -05:00
KONRAD Frederic b102aea574 qcow: fix a reference leak
Since 42a3e1ab36 qemu asserts when using the
vvfat driver:

git clone git://qemu.org/qemu.git
cd qemu
./configure --target-list=ppc-softmmu --enable-debug
make -j8
mkdir foo
touch foo/hello
./ppc-softmmu/qemu-system-ppc -M prep --nographic --monitor null             \
                              -hda fat:rw:./foo

"Ctrl-C"

qemu-system-ppc: block.c:3368: bdrv_close_all: Assertion                     \
   `((&all_bdrv_states)->tqh_first == ((void *)0))' failed.

This is because we reference bs twice in qcow_co_create(..) one time in
bdrv_open_blockdev_ref(..) and in blk_insert_bs(..) but we unref it only once
in blk_unref which leads to the reference leak.

Note that I didn't tested much QCOW after this change as I don't use it much.

Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 41b6513436)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-31 11:46:31 -05:00
Christian Borntraeger 336cd382dc s390x/sclp: fix maxram calculation
We clamp down ram_size to match the sclp increment size. We do
not do the same for maxram_size, which means for large guests
with some sizes (e.g. -m 50000) maxram_size differs from ram_size.
This can break other code (e.g. CMMA migration) which uses maxram_size
to calculate the number of pages and then throws some errors.

Fixes: 82fab5c5b9 ("s390x/sclp: remove memory hotplug support")
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
CC: qemu-stable@nongnu.org
CC: David Hildenbrand <david@redhat.com>
Message-Id: <1532959766-53343-1-git-send-email-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
(cherry picked from commit 408e5ace51)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-31 11:27:16 -05:00
Marc-André Lureau bf1cb819e9 qga: process_event() simplification and leak fix
json_parser_parse_err() may return something else than a QDict, in
which case we loose the object. Let's keep track of the original
object to avoid leaks.

When an error occurs, "qdict" contains the response, but we still
check the "execute" key there. Untangle a bit this code, by having a
clear error path.

CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
(cherry picked from commit ae7da1e5f6)
* drop context dep on d43b16945a
* drop functional dep on cb3e7f08ae
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-24 17:47:40 -05:00
Markus Armbruster 08c4a51c65 qmp: De-duplicate error response building
All callers of qmp_build_error_object() duplicate the code to wrap it
in a response object.  Replace it by qmp_error_response() that
captures the duplicated code, including error_free().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-23-armbru@redhat.com>
(cherry picked from commit cee32796ca)
 Conflicts:
	include/qapi/qmp/dispatch.h
	qapi/qmp-dispatch.c
	qga/main.c
* drop context dep on cb3e7f08ae
* prereq for ae7da1e5f6
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-24 15:45:47 -05:00
Markus Armbruster 441784598e qobject: New qdict_from_jsonf_nofail()
Many uses of qobject_from_jsonf() convert JSON objects.  Create new
convenience function qdict_from_jsonf_nofail() that includes the
conversion to QDict.  The next few commits will put it to use.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-22-armbru@redhat.com>
(cherry picked from commit a193352ff9)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-24 15:05:01 -05:00
Michael Roth 2f36efaeb1 Merge tag 's390x-20180724-212-stable' into stable-2.12-staging
update s390-ccw.img for stable
2018-07-24 14:12:14 -05:00
Marc-André Lureau 90b2d94123 ccid-card-passthru: fix regression in realize()
Since cc847bfd16, CCID card-passthru
fails to intialize, because it changed a debug line to an error,
probably by mistake. Change it back to a DPRINTF debug.

(solves Boxes creating VM with smartcard passthru failing to start)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180515153039.27514-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit e58d64a16a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-24 14:08:46 -05:00
Cornelia Huck c16427177a pc-bios/s390-ccw.img: update image for stable
Contains the following commits:
- s390-ccw: force diag 308 subcode to unsigned long
- pc-bios/s390-ccw: struct tpi_info must be declared as aligned(4)

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-07-24 06:08:42 -04:00
Richard Henderson e8488edcb3 tcg/i386: Mark xmm registers call-clobbered
When host vector registers and operations were introduced, I failed
to mark the registers call clobbered as required by the ABI.

Fixes: 770c2fc7bb
Cc: qemu-stable@nongnu.org
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 672189cd58)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-23 14:24:17 -05:00
Peter Lieven 3afe55ff38 qemu-img: avoid overflow of min_sparse parameter
the min_sparse convert parameter can overflow (e.g. -S 1024G)
in the conversion from int64_t to int resulting in a negative
min_sparse parameter. Avoid this by limiting the valid parameters
to sane values. In fact anything exceeding the convert buffer size
is also pointless. While at it also forbid values that are non
multiple of 512 to avoid undesired behaviour. For instance, values
between 1 and 511 were legal, but resulted in full allocation.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 6360ab278c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-23 14:23:30 -05:00
Yunjian Wang 1b817abcd4 tap: fix memory leak on success to create a tap device
The memory leak on success to create a tap device. And the nfds and
nvhosts may not be the same and need to be processed separately.

Fixes: 07825977 ("tap: fix memory leak on failure to create a multiqueue tap device")
Fixes: 264986e2 ("tap: multiqueue support")
Cc: qemu-stable@nongnu.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 323e7c1177)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-23 14:20:45 -05:00
Emilio G. Cota 0935356e43 target/ppc: set is_jmp on ppc_tr_breakpoint_check
The use of GDB breakpoints was broken by b0c2d52 ("target/ppc: convert
to TranslatorOps", 2018-02-16).

Fix it by setting is_jmp, so that we break from the translation loop
as originally intended.

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
(cherry picked from commit 2a8ceefca2)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 16:13:24 -05:00
Pankaj Gupta d109f8eb7e virtio-rng: process pending requests on DRIVER_OK
virtio-rng device causes old guest kernels(2.6.32) to hang on latest qemu.
The driver attempts to read from the virtio-rng device too early in it's
initialization. Qemu detects guest is not ready and returns, resulting in
hang.

To fix handle pending requests when guest is running and driver status is
set to 'VIRTIO_CONFIG_S_DRIVER_OK'.

CC: qemu-stable@nongnu.org
Reported-by: Sergio lopez <slopezpa@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 5d9c9ea22a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 16:11:30 -05:00
Eric Blake 2379ac134a iscsi: Avoid potential for get_status overflow
Detected by Coverity: Multiplying two 32-bit int and assigning
the result to a 64-bit number is a risk of overflow.  Prior to
the conversion to byte-based interfaces, the block layer took
care of ensuring that a status request never exceeded 2G in
the driver; but after that conversion, the block layer expects
drivers to deal with any size request (the driver can always
truncate the request size back down, as long as it makes
progress).  So, in the off-chance that someone makes a large
request, we are at the mercy of whether iscsi_get_lba_status_task()
will cap things to at most INT_MAX / iscsilun->block_size when
it populates lbasd->num_blocks; since I could not easily audit
that, it's better to be safe than sorry by just forcing a 64-bit
multiply.

Fixes: 92809c36
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180508212718.1482663-1-eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
(cherry picked from commit 8ee1cef459)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 16:10:48 -05:00
Eric Blake f8b3b02933 nbd/server: Reject 0-length block status request
The NBD spec says that behavior is unspecified if the client
requests 0 length for block status; but since the structured
reply is documenting as returning a non-zero length, it's
easier to just diagnose this with an EINVAL error than to
figure out what to return.

CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180621124937.166549-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
(cherry picked from commit d8b20291cb)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 11:51:25 -05:00
Richard Henderson 78747264b9 tcg: Reduce max TB opcode count
Also, assert that we don't overflow any of two different offsets into
the TB. Both unwind and goto_tb both record a uint16_t for later use.

This fixes an arm-softmmu test case utilizing NEON in which there is
a TB generated that runs to 7800 opcodes, and compiles to 96k on an
x86_64 host.  This overflows the 16-bit offset in which we record the
goto_tb reset offset.  Because of that overflow, we install a jump
destination that goes to neverland.  Boom.

With this reduced op count, the same TB compiles to about 48k for
aarch64, ppc64le, and x86_64 hosts, and neither assertion fires.

Cc: qemu-stable@nongnu.org
Reported-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 9f75462065)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 11:44:56 -05:00
Vladimir Sementsov-Ogievskiy d8a7ec1deb migration/block-dirty-bitmap: fix dirty_bitmap_load
dirty_bitmap_load_header return code is obtained but not handled. Fix
this.

Bug was introduced in b35ebdf076
"migration: add postcopy migration of dirty bitmaps" with the whole
function.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180530112424.204835-1-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
(cherry picked from commit a36f6ff46f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 11:43:20 -05:00
Alex Williamson 2cb041a82d vfio/pci: Default display option to "off"
Commit a9994687cb ("vfio/display: core & wireup") added display
support to vfio-pci with the default being "auto", which breaks
existing VMs when the vGPU requires GL support but had no previous
requirement for a GL compatible configuration.  "Off" is the safer
default as we impose no new requirements to VM configurations.

Fixes: a9994687cb ("vfio/display: core & wireup")
Cc: qemu-stable@nongnu.org
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
(cherry picked from commit 8151a9c56d)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 11:15:01 -05:00
Olaf Hering 6d3ed3798b replace functions which are only available in glib-2.24
Currently the minimal supported version of glib is 2.22.
Since testing is done with a glib that claims to be 2.22, but in fact
has APIs from newer version of glib, this bug was not caught during
submit of the patch referenced below.

Replace g_realloc_n, which is available only since 2.24, with g_renew.

Fixes commit 418026ca43 ("util: Introduce vfio helpers")

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
CC: qemu-stable@nongnu.org
(cherry picked from commit d29eb678bc)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 11:12:05 -05:00
Kevin Wolf 58119514f5 nfs: Remove processed options from QDict
Commit c22a03454 QAPIfied option parsing in the NFS block driver, but
forgot to remove all the options we processed. Therefore, we get an
error in bdrv_open_inherit(), which thinks the remaining options are
invalid. Trying to open an NFS image will result in an error like this:

    Block protocol 'nfs' doesn't support the option 'server.host'

Remove all options from the QDict to make the NFS driver work again.

Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20180516160816.26259-1-kwolf@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
(cherry picked from commit c82be42cc8)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 11:10:19 -05:00
Marc-André Lureau 008ffc7a2f mux: fix ctrl-a b again
Commit fb5e19d2e1 originally fixed the
regression, but was inadvertently broken again in merge commit
2d6752d38d.

Fixes:
https://bugs.launchpad.net/qemu/+bug/1654137

Cc: qemu-stable@nongnu.org
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180515152500.19460-3-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit eeaa671505)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 11:03:03 -05:00
Philippe Mathieu-Daudé 5e10c00f61 hw/isa/superio: Fix inconsistent use of Chardev->be
4c3119a6e3 and cd9526ab7c introduced an incorrect and inconsistent
use of Chardev->be. Also, this CharBackend member is private and is
not supposed to be accessible.

Fix it by removing the inconsistent check.

Cc: qemu-stable@nongnu.org
Reported-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180515152500.19460-2-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
(cherry picked from commit d4c8fcd91a)
 Conflicts:
	hw/isa/isa-superio.c
* avoid context dep on 9bca0edb28
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 11:02:03 -05:00
Alex Bennée ca11f0ab77 target/arm: Fix sqrt_f16 exception raising
We are meant to explicitly pass fpst, not cpu_env.

Cc: qemu-stable@nongnu.org
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180512003217.9105-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 905edee910)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:52:03 -05:00
Alex Bennée ffc3a15018 target/arm: Implement FMOV (immediate) for fp16
All the hard work is already done by vfp_expand_imm, we just need to
make sure we pick up the correct size.

Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180512003217.9105-11-richard.henderson@linaro.org
[rth: Merge unallocated_encoding check with TCGMemOp conversion.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

(cherry picked from commit 6ba28ddb9b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:51:54 -05:00
Alex Bennée f3816879f9 target/arm: Implement FCSEL for fp16
These were missed out from the rest of the half-precision work.

Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180512003217.9105-10-richard.henderson@linaro.org
[rth: Fix erroneous check vs type]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

(cherry picked from commit ace97feef3)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:51:44 -05:00
Alex Bennée 246dad2f3c target/arm: Implement FCMP for fp16
These where missed out from the rest of the half-precision work.

Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180512003217.9105-9-richard.henderson@linaro.org
[rth: Diagnose lack of FP16 before fp_access_check]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

(cherry picked from commit 7a1929256e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:51:31 -05:00
Richard Henderson 0819a17250 target/arm: Implement FP data-processing (3 source) for fp16
We missed all of the scalar fp16 fma operations.

Cc: qemu-stable@nongnu.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180512003217.9105-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 95f9864fde)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:51:20 -05:00
Richard Henderson 7133cd4cfe target/arm: Implement FP data-processing (2 source) for fp16
We missed all of the scalar fp16 binary operations.

Cc: qemu-stable@nongnu.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180512003217.9105-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit b8f5171cf0)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:51:05 -05:00
Richard Henderson d1ed4a60ba target/arm: Introduce and use read_fp_hreg
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180512003217.9105-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 3d99d93126)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:50:48 -05:00
Richard Henderson 7c38f3703d target/arm: Implement FCVT (scalar, fixed-point) for fp16
Cc: qemu-stable@nongnu.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180512003217.9105-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 2752728016)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:50:35 -05:00
Richard Henderson baa552e54f target/arm: Implement FCVT (scalar, integer) for fp16
Cc: qemu-stable@nongnu.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180512003217.9105-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 564a063250)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:49:18 -05:00
Richard Henderson 4ec6a17a04 target/arm: Implement FMOV (general) for fp16
Adding the fp16 moves to/from general registers.

Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180512003217.9105-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 68130236e3)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:48:36 -05:00
Petr Tesarik 781cde6d94 fpu/softfloat: Fix conversion from uint64 to float128
The significand is passed to normalizeRoundAndPackFloat128() as high
first, low second. The current code passes the integer first, so the
result is incorrectly shifted left by 64 bits.

This bug affects the emulation of s390x instruction CXLGBR (convert
from logical 64-bit binary-integer operand to extended BFP result).

Cc: qemu-stable@nongnu.org
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Message-Id: <20180511071052.1443-1-ptesarik@suse.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 6603d50648)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:47:49 -05:00
Richard Henderson e5af958dd2 target/arm: Clear SVE high bits for FMOV
Use write_fp_dreg and clear_vec_high to zero the bits
that need zeroing for these cases.

Cc: qemu-stable@nongnu.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180502221552.3873-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 9a9f1f5952)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:47:00 -05:00
Richard Henderson c708ce7d6e target/arm: Fix float16 to/from int16
The instruction "ucvtf v0.4h, v04h, #2", with input 0x8000u,
overflows the intermediate float16 to infinity before we have a
chance to scale the output.  Use float64 as the intermediate type
so that no input argument (uint32_t in this case) can overflow
or round before scaling.  Given the declared argument, the signed
int32_t function has the same problem.

When converting from float16 to integer, using u/int32_t instead
of u/int16_t means that the bounding is incorrect.

Cc: qemu-stable@nongnu.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180502221552.3873-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 88808a022c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:46:52 -05:00
Richard Henderson 0aaf1cca02 target/arm: Implement vector shifted FCVT for fp16
While we have some of the scalar paths for FCVT for fp16,
we failed to decode the fp16 version of these instructions.

Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180502221552.3873-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit d0ba8e74ac)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:46:40 -05:00
Richard Henderson 994b0cf997 target/arm: Implement vector shifted SCVF/UCVF for fp16
While we have some of the scalar paths for *CVF for fp16,
we failed to decode the fp16 version of these instructions.

Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180502221552.3873-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit a6117fae45)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:46:30 -05:00
Peter Maydell e653eee8d8 fpu/softfloat: Don't set Invalid for float-to-int(MAXINT)
In float-to-integer conversion, if the floating point input
converts exactly to the largest or smallest integer that
fits in to the result type, this is not an overflow.
In this situation we were producing the correct result value,
but were incorrectly setting the Invalid flag.
For example for Arm A64, "FCVTAS w0, d0" on an input of
0x41dfffffffc00000 should produce 0x7fffffff and set no flags.

Fix the boundary case to take the right half of the if()
statements.

This fixes a regression from 2.11 introduced by the softfloat
refactoring.

Cc: qemu-stable@nongnu.org
Fixes: ab52f973a5
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180510140141.12120-1-peter.maydell@linaro.org
(cherry picked from commit 333583757c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:45:23 -05:00
Peter Maydell fbaeb1068c target/arm: Fix fp_status_f16 tininess before rounding
In commit d81ce0ef2c we added an extra float_status field
fp_status_fp16 for Arm, but forgot to initialize it correctly
by setting it to float_tininess_before_rounding. This currently
will only cause problems for the new V8_FP16 feature, since the
float-to-float conversion code doesn't use it yet. The effect
would be that we failed to set the Underflow IEEE exception flag
in all the cases where we should.

Add the missing initialization.

Fixes: d81ce0ef2c
Cc: qemu-stable@nongnu.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180512004311.9299-16-richard.henderson@linaro.org
(cherry picked from commit bcc531f036)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:43:45 -05:00
John Snow 0779afdc89 blockjob: expose error string via query
When we've reached the concluded state, we need to expose the error
state if applicable. Add the new field.

This should be sufficient for determining if a job completed
successfully or not after concluding; if we want to discriminate
based on how it failed more mechanically, we can always add an
explicit return code enumeration later.

I didn't bother to make it only show up if we are in the concluded
state; I don't think it's necessary.

Cc: qemu-stable@nongnu.org
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit ab9ba61455)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:35:53 -05:00
Michael Clark 4a67f4a953 RISC-V: Minimal QEMU 2.12 fix for sifive_u machine
The 'sifive_u' board has a bug where the ROM is
created as RAM at the wrong address and marked
readonly. The bug renders the board unusable.
This is a minimal fix and allows booting Linux.

5aec3247c1
"RISC-V: Mark ROM read-only after copying in code"
contains a comprehensive fix using the ROM APIs
memory_region_init_rom and rom_add_blob_fixed_as
which could be backported.

Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-18 10:32:06 -05:00
Richard Henderson 9363c34825 tcg: Limit the number of ops in a TB
In 6001f7729e we partially attempt to address the branch
displacement overflow caused by 15fa08f845.

However, gcc/testsuite/gcc.target/aarch64/advsimd-intrinsics/vqtbX.c
is a testcase that contains a TB so large as to overflow anyway.
The limit here of 8000 ops produces a maximum output TB size of
24112 bytes on a ppc64le host with that test case.  This is still
much less than the maximum forward branch distance of 32764 bytes.

Cc: qemu-stable@nongnu.org
Fixes: 15fa08f845 ("tcg: Dynamically allocate TCGOps")
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit abebf92597)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:22 -05:00
Peter Maydell 51d5decb32 softfloat: Handle default NaN mode after pickNaNMulAdd, not before
It is implementation defined whether a multiply-add of
(0,inf,qnan) or (inf,0,qnan) raises InvalidaOperation or
not, so we let the target-specific pickNaNMulAdd function
handle this. This means that we must do the "return the
default NaN in default NaN mode" check after the call,
not before. Correct the ordering, and restore the comment
from the old propagateFloat64MulAddNaN() that warned about
this corner case.

This fixes a regression from 2.11 for Arm guests where we would
incorrectly fail to set the Invalid flag for these cases.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180504100547.14621-1-peter.maydell@linaro.org
(cherry picked from commit 1839189bbf)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:22 -05:00
Peter Maydell 0e4b4b4fd3 tcg/i386: Fix dup_vec in non-AVX2 codepath
The VPUNPCKLD* instructions are all "non-destructive source",
indicated by "NDS" in the encoding string in the x86 ISA manual.
This means that they take two source operands, one of which is
encoded in the VEX.vvvv field. We were incorrectly treating them
as if they were destructive-source and passing 0 as the 'v'
argument of tcg_out_vex_modrm(). This meant we were always
using %xmm0 as one of the source operands, causing incorrect
results if the register allocator happened to want to use
something else. For instance the input AArch64 insn:
 DUP v26.16b, w21
which becomes TCG IR ops:
 dup_vec v128,e8,tmp2,x21
 st_vec v128,e8,tmp2,env,$0xa40
was assembled to:
0x607c568c:  c4 c1 7a 7e 86 e8 00 00  vmovq    0xe8(%r14), %xmm0
0x607c5694:  00
0x607c5695:  c5 f9 60 c8              vpunpcklbw %xmm0, %xmm0, %xmm1
0x607c5699:  c5 f9 61 c9              vpunpcklwd %xmm1, %xmm0, %xmm1
0x607c569d:  c5 f9 70 c9 00           vpshufd  $0, %xmm1, %xmm1
0x607c56a2:  c4 c1 7a 7f 8e 40 0a 00  vmovdqu  %xmm1, 0xa40(%r14)
0x607c56aa:  00

when the vpunpcklwd insn should be "%xmm1, %xmm1, %xmm1".
This resulted in our incorrectly setting the output vector to
q26=0000320000003200:0000320000003200
when given an input of x21 == 0000000002803200
rather than the expected all-zeroes.

Pass the correct source register number to tcg_out_vex_modrm()
for these insns.

Fixes: 770c2fc7bb
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180504153431.5169-1-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 7eb30ef0ba)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:22 -05:00
Eric Blake 6951158023 nbd/client: Relax handling of large NBD_CMD_BLOCK_STATUS reply
The NBD spec is proposing a relaxation of NBD_CMD_BLOCK_STATUS
where a server may have the final extent per context give a
length beyond the original request, if it can easily prove that
subsequent bytes have the same status, on the grounds that a
client can take advantage of this information for fewer block
status requests.  Since qemu 2.12 as a client always sends
NBD_CMD_FLAG_REQ_ONE, and rejects a server that sends extra
length, the upstream NBD spec will probably limit this behavior
to clients that don't request REQ_ONE semantics; but it doesn't
hurt to relax qemu to always be permissive of this server
behavior, even if it continues to use REQ_ONE.

CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180503222626.1303410-1-eblake@redhat.com>
Reviewed-by:  Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
(cherry picked from commit acfd8f7a5f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:22 -05:00
KONRAD Frederic b129914a8d riscv: requires libfdt
When compiling on a machine without libfdt installed the configure script
should try to get libfdt from the git or should die because otherwise
CONFIG_LIBFDT is not set and the build process end in an error in the link
phase.. eg:

hw/riscv/virt.o: In function `riscv_virt_board_init':
qemu/src/hw/riscv/virt.c:317: undefined reference to `qemu_fdt_setprop_cell'
qemu/src/hw/riscv/virt.c:319: undefined reference to `qemu_fdt_setprop_cell'
qemu/src/hw/riscv/virt.c:345: undefined reference to `qemu_fdt_dumpdtb'
collect2: error: ld returned 1 exit status
make[1]: *** [qemu-system-riscv64] Error 1
make: *** [subdir-riscv64-softmmu] Error 2

Cc: qemu-stable@nongnu.org
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Michael Clark <mjc@sifive.com>

Message-Id: <1525360636-18229-4-git-send-email-frederic.konrad@adacore.com>
(cherry picked from commit a666409f0d)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:22 -05:00
KONRAD Frederic db6f66eff7 riscv: htif: increase the priority of the htif subregion
The htif device is supposed to be mapped over an other subregion. So increase
its priority to one to avoid any conflict.

Here is the output of info mtree:

Before:
(qemu) info mtree
 address-space: memory
   0000000000000000-ffffffffffffffff (prio 0, i/o): system
     0000000000000000-000000000000000f (prio 0, i/o): riscv.htif.uart
     0000000000000000-0000000000011fff (prio 0, ram): riscv.spike.bootrom
     0000000002000000-000000000200ffff (prio 0, i/o): riscv.sifive.clint
     0000000080000000-0000000087ffffff (prio 0, ram): riscv.spike.ram

 address-space: I/O
   0000000000000000-000000000000ffff (prio 0, i/o): io

 address-space: cpu-memory-0
   0000000000000000-ffffffffffffffff (prio 0, i/o): system
     0000000000000000-000000000000000f (prio 0, i/o): riscv.htif.uart
     0000000000000000-0000000000011fff (prio 0, ram): riscv.spike.bootrom
     0000000002000000-000000000200ffff (prio 0, i/o): riscv.sifive.clint
     0000000080000000-0000000087ffffff (prio 0, ram): riscv.spike.ram

After:
 (qemu) info mtree
 address-space: memory
   0000000000000000-ffffffffffffffff (prio 0, i/o): system
     0000000000000000-000000000000000f (prio 1, i/o): riscv.htif.uart
     0000000000000000-0000000000011fff (prio 0, ram): riscv.spike.bootrom
     0000000002000000-000000000200ffff (prio 0, i/o): riscv.sifive.clint
     0000000080000000-0000000087ffffff (prio 0, ram): riscv.spike.ram

 address-space: I/O
   0000000000000000-000000000000ffff (prio 0, i/o): io

 address-space: cpu-memory-0
   0000000000000000-ffffffffffffffff (prio 0, i/o): system
     0000000000000000-000000000000000f (prio 1, i/o): riscv.htif.uart
     0000000000000000-0000000000011fff (prio 0, ram): riscv.spike.bootrom
     0000000002000000-000000000200ffff (prio 0, i/o): riscv.sifive.clint
     0000000080000000-0000000087ffffff (prio 0, ram): riscv.spike.ram

Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Michael Clark <mjc@sifive.com>

Message-Id: <1525360636-18229-3-git-send-email-frederic.konrad@adacore.com>
(cherry picked from commit 6fad7d1893)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:22 -05:00
KONRAD Frederic 26cf05c1a1 riscv: spike: allow base == 0
The sanity check on base doesn't allow htif to be mapped @0. Check if the
symbol exists instead so we can map it where we want.

Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Michael Clark <mjc@sifive.com>

Message-Id: <1525360636-18229-2-git-send-email-frederic.konrad@adacore.com>
(cherry picked from commit 17b9751e85)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:22 -05:00
Max Reitz 7bc615f88f iotests: Add test for cancelling a mirror job
We already have an extensive mirror test (041) which does cover
cancelling a mirror job, especially after it has emitted the READY
event.  However, it does not check what exact events are emitted after
block-job-cancel is executed.  More importantly, it does not use
throttling to ensure that it covers the case of block-job-cancel before
READY.

It would be possible to add this case to 041, but considering it is
already our largest test file, it makes sense to create a new file for
these cases.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180501220509.14152-3-mreitz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
(cherry picked from commit dc885fff97)
 Conflicts:
	tests/qemu-iotests/group
* fix minor conflicts with test groups
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:21 -05:00
Max Reitz 1eddfab31c block/mirror: Make cancel always cancel pre-READY
Commit b76e4458b1 made the mirror block
job respect block-job-cancel's @force flag: With that flag set, it would
now always really cancel, even post-READY.

Unfortunately, it had a side effect: Without that flag set, it would now
never cancel, not even before READY.  Considering that is an
incompatible change and not noted anywhere in the commit or the
description of block-job-cancel's @force parameter, this seems
unintentional and we should revert to the previous behavior, which is to
immediately cancel the job when block-job-cancel is called before source
and target are in sync (i.e. before the READY event).

Cc: qemu-stable@nongnu.org
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1572856
Reported-by: Yanan Fu <yfu@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180501220509.14152-2-mreitz@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
(cherry picked from commit eb36639f7b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:21 -05:00
Laszlo Ersek 3882183fda qapi: fill in CpuInfoFast.arch in query-cpus-fast
* Commit ca230ff33f added the @arch field to @CpuInfoFast, but it failed
  to set the new field in qmp_query_cpus_fast(), when TARGET_S390X was not
  defined. The updated @query-cpus-fast example in "qapi-schema.json"
  showed "arch":"x86" only because qmp_query_cpus_fast() calls g_malloc0()
  to allocate @CpuInfoFast, and the CPU_INFO_ARCH_X86 enum constant is
  generated with value 0.

  All @arch values other than @s390 implied the @CpuInfoOther sub-struct
  for @CpuInfoFast -- at the time of writing the patch --, thus no fields
  other than @arch needed to be set when TARGET_S390X was not defined. Set
  @arch now, by copying the corresponding assignments from
  qmp_query_cpus().

* Commit 25fa194b7b added the @riscv enum constant to @CpuInfoArch (used
  in both @CpuInfo and @CpuInfoFast -- the return types of the @query-cpus
  and @query-cpus-fast commands, respectively), and assigned, in both
  return structures, the @CpuInfoRISCV sub-structure to the new enum
  value.

  However, qmp_query_cpus_fast() would not populate either the @arch field
  or the @CpuInfoRISCV sub-structure, when TARGET_RISCV was defined; only
  qmp_query_cpus() would.

  Assign @CpuInfoOther to the @riscv enum constant in @CpuInfoFast, and
  populate only the @arch field in qmp_query_cpus_fast(). Getting CPU
  state without interrupting KVM is an exceptional thing that only S390X
  does currently. Quoting Cornelia Huck <cohuck@redhat.com>, "s390x is
  exceptional in that it has state in QEMU that is actually interesting
  for upper layers and can be retrieved without performance penalty". See
  also
  <https://www.redhat.com/archives/libvir-list/2018-February/msg00121.html>.

Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Viktor VM Mihajlovski <mihajlov@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Fixes: ca230ff33f
Fixes: 25fa194b7b
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180427192852.15013-2-lersek@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
(cherry picked from commit 96054f5639)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:21 -05:00
Vladimir Sementsov-Ogievskiy 3b52d47418 migration/block-dirty-bitmap: fix memory leak in dirty_bitmap_load_bits
Release buf on error path too.

Bug was introduced in b35ebdf076 "migration: add postcopy
migration of dirty bitmaps" with the whole function.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180427142002.21930-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 16a2227893)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:21 -05:00
Vladimir Sementsov-Ogievskiy f155487bef nbd/client: fix nbd_negotiate_simple_meta_context
Initialize received variable. Otherwise, is is possible for server to
answer without any contexts, but we will set context_id to something
random (received_id is not initialized too) and return 1, which is
wrong.

To solve it, just initialize received to false. Initialize received_id
too, just to make all possible checkers happy.

Bug was introduced in 78a33ab587 "nbd: BLOCK_STATUS for
standard get_block_status function: client part" with the whole
function.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180427142002.21930-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 89aa0d8763)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:21 -05:00
Cédric Le Goater 54eb6cc6d7 cpus: tcg: fix never exiting loop on unplug
Commit 9b0605f983 ("cpus: tcg: unregister thread with RCU, fix
exiting of loop on unplug") changed the exit condition of the loop in
the vCPU thread function but forgot to remove the beginning 'while (1)'
statement. The resulting code :

	while (1) {
	...
	} while (!cpu->unplug || cpu_can_run(cpu));

is a sequence of two distinct two while() loops, the first not exiting
in case of an unplug event.

Remove the first while (1) to fix CPU unplug.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20180425131828.15604-1-clg@kaod.org>
Cc: qemu-stable@nongnu.org
Fixes: 9b0605f983
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
(cherry picked from commit 54961aac19)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:21 -05:00
Stefan Hajnoczi 9eb3e5a8a8 block/mirror: honor ratelimit again
Commit b76e4458b1 ("block/mirror: change
the semantic of 'force' of block-job-cancel") accidentally removed the
ratelimit in the mirror job.

Reintroduce the ratelimit but keep the block-job-cancel force=true
behavior that was added in commit
b76e4458b1.

Note that block_job_sleep_ns() returns immediately when the job is
cancelled.  Therefore it's safe to unconditionally call
block_job_sleep_ns() - a cancelled job does not sleep.

This commit fixes the non-deterministic qemu-iotests 185 output.  The
test relies on the ratelimit to make the job sleep until the 'quit'
command is processed.  Previously the job could complete before the
'quit' command was received since there was no ratelimit.

Cc: Liang Li <liliang.opensource@gmail.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180424123527.19168-1-stefanha@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
(cherry picked from commit ddc4115efd)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:21 -05:00
Gerd Hoffmann 05a3e663b1 vnc: fix use-after-free
When vnc_client_read() return value is -1
vs is not valid any more.

Fixes: d49b87f0d1
Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180420084820.3873-1-kraxel@redhat.com
(cherry picked from commit 1bc3117aba)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:21 -05:00
Philippe Mathieu-Daudé 073198b8e8 usb/dev-mtp: Fix use of uninitialized values
This fixes:

  hw/usb/dev-mtp.c:971:5: warning: 4th function call argument is an uninitialized value
      trace_usb_mtp_op_get_partial_object(s->dev.addr, o->handle, o->path,
                                           c->argv[1], c->argv[2]);
                                                       ^~~~~~~~~~
and:

  hw/usb/dev-mtp.c:981:12: warning: Assigned value is garbage or undefined
      offset = c->argv[1];
               ^ ~~~~~~~~~~

Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180604151421.23385-3-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 62713a2e50)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:21 -05:00
Philippe Mathieu-Daudé 5da7e93f51 usb: correctly handle Zero Length Packets
USB Specification Revision 2.0, §5.5.3:
  The Data stage of a control transfer from an endpoint to the host is complete when the endpoint does one of the following:
  • Has transferred exactly the amount of data specified during the Setup stage
  • Transfers a packet with a payload size less than wMaxPacketSize or transfers a zero-length packet"

hw/usb/redirect.c:802:9: warning: Declared variable-length array (VLA) has zero size
        uint8_t buf[size];
        ^~~~~~~~~~~ ~~~~

Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180604151421.23385-2-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit bf78fb1c1b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:21 -05:00
Shannon Zhao c5dd07b529 arm_gicv3_kvm: kvm_dist_get/put_priority: skip the registers banked by GICR_IPRIORITYR
While for_each_dist_irq_reg loop starts from GIC_INTERNAL, it forgot to
offset the date array and index. This will overlap the GICR registers
value and leave the last GIC_INTERNAL irq's registers out of update.

Fixes: 367b9f527b
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 1dcf367519)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:20 -05:00
Eric Blake 396d79c36c iotests: Add test 221 to catch qemu-img map regression
Although qemu-img creates aligned files (by rounding up), it
must also gracefully handle files that are not sector-aligned.
Test that the bug fixed in the previous patch does not recur.

It's a bit annoying that we can see the (implicit) hole past
the end of the file on to the next sector boundary, so if we
ever reach the point where we report a byte-accurate size rather
than our current behavior of always rounding up, this test will
probably need a slight modification.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit c6a9d2f6f9)
 Conflicts:
	tests/qemu-iotests/group
* drop context dep on tests not present in 2.12
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:20 -05:00
Eric Blake 26cdf35f69 qemu-img: Fix assert when mapping unaligned raw file
Commit a290f085 exposed a latent bug in qemu-img map introduced
during the conversion of block status to be byte-based.  Earlier in
commit 5e344dd8, the internal interface get_block_status() switched
to take byte-based parameters, but still called a sector-based
block layer function; as such, rounding was added in the lone
caller to obey the contract.  However, commit 237d78f8 changed
get_block_status() to truly be byte-based, at which point rounding
to sector boundaries can result in calling bdrv_block_status() with
'bytes == 0' (a coding error) when the boundary between data and a
hole falls mid-sector (true for the past-EOF implicit hole present
in POSIX files).  Fix things by removing the rounding that is now
no longer necessary.

See also https://bugzilla.redhat.com/1589738

Fixes: 237d78f8
Reported-by: Dan Kenigsberg <danken@redhat.com>
Reported-by: Nir Soffer <nsoffer@redhat.com>
Reported-by: Maor Lipchuk <mlipchuk@redhat.com>
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit e0b371ed5e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:20 -05:00
linzhecheng fb7f173c2c vhost-user: delete net client if necessary
As qemu_new_net_client create new ncs but error happens later,
ncs will be left in global net_clients list and we can't use them any
more, so we need to cleanup them.

Cc: qemu-stable@nongnu.org
Signed-off-by: linzhecheng <linzhecheng@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit c67daf4a24)
 Conflicts:
	net/vhost-user.c
* drop functional dep on 4d0cf552
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:20 -05:00
Brijesh Singh 2f2b189235 tap: set vhostfd passed from qemu cli to non-blocking
A guest boot hangs while probing the network interface when
iommu_platform=on is used.

The following qemu cli hangs without this patch:

# $QEMU \
  -netdev tap,fd=3,id=hostnet0,vhost=on,vhostfd=4 3<>/dev/tap67 4<>/dev/host-net \
  -device virtio-net-pci,netdev=hostnet0,id=net0,iommu_platform=on,disable-legacy=on \
  ...

Commit: c471ad0e9b (vhost_net: device IOTLB support) took care of
setting vhostfd to non-blocking when QEMU opens /dev/host-net but if
the fd is passed from qemu cli then we need to ensure that fd is set
to non-blocking.

Fixes: c471ad0e9b ("vhost_net: device IOTLB support")
Cc: qemu-stable@nongnu.org
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit d542800d1e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:20 -05:00
Konrad Rzeszutek Wilk 43163837d3 i386: define the AMD 'virt-ssbd' CPUID feature bit (CVE-2018-3639)
AMD Zen expose the Intel equivalant to Speculative Store Bypass Disable
via the 0x80000008_EBX[25] CPUID feature bit.

This needs to be exposed to guest OS to allow them to protect
against CVE-2018-3639.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180521215424.13520-3-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
(cherry picked from commit 403503b162)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:20 -05:00
Konrad Rzeszutek Wilk 3129ddb943 i386: Define the Virt SSBD MSR and handling of it (CVE-2018-3639)
"Some AMD processors only support a non-architectural means of enabling
speculative store bypass disable (SSBD).  To allow a simplified view of
this to a guest, an architectural definition has been created through a new
CPUID bit, 0x80000008_EBX[25], and a new MSR, 0xc001011f.  With this, a
hypervisor can virtualize the existence of this definition and provide an
architectural method for using SSBD to a guest.

Add the new CPUID feature, the new MSR and update the existing SSBD
support to use this MSR when present." (from x86/speculation: Add virtualized
speculative store bypass disable support in Linux).

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180521215424.13520-4-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
(cherry picked from commit cfeea0c021)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:20 -05:00
Daniel P. Berrangé 8a302f42a5 i386: define the 'ssbd' CPUID feature bit (CVE-2018-3639)
New microcode introduces the "Speculative Store Bypass Disable"
CPUID feature bit. This needs to be exposed to guest OS to allow
them to protect against CVE-2018-3639.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Message-Id: <20180521215424.13520-2-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
(cherry picked from commit d19d1f9659)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:20 -05:00
Alberto Garcia ef67e67388 throttle: Fix crash on reopen
The throttle block filter can be reopened, and with this it is
possible to change the throttle group that the filter belongs to.

The way the code does that is the following:

  - On throttle_reopen_prepare(): create a new ThrottleGroupMember
    and attach it to the new throttle group.

  - On throttle_reopen_commit(): detach the old ThrottleGroupMember,
    delete it and replace it with the new one.

The problem with this is that by replacing the ThrottleGroupMember the
previous value of io_limits_disabled is lost, causing an assertion
failure in throttle_co_drain_end().

This problem can be reproduced by reopening a throttle node:

   $QEMU -monitor stdio
   -object throttle-group,id=tg0,x-iops-total=1000 \
   -blockdev node-name=hd0,driver=qcow2,file.driver=file,file.filename=hd.qcow2 \
   -blockdev node-name=root,driver=throttle,throttle-group=tg0,file=hd0,read-only=on

   (qemu) block_stream root
   block/throttle.c:214: throttle_co_drain_end: Assertion `tgm->io_limits_disabled' failed.

Since we only want to change the throttle group on reopen there's no
need to create a ThrottleGroupMember and discard the old one. It's
easier if we simply detach it from its current group and attach it to
the new one.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180608151536.7378-1-berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
(cherry picked from commit bc33c047d1)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:20 -05:00
Max Reitz 081eac8b30 iotests: Add case for a corrupted inactive image
Reviewed-by: John Snow <jsnow@redhat.com>
Tested-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180606193702.7113-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
(cherry picked from commit c50abd175a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:20 -05:00
Max Reitz 5aa76f3a8c qcow2: Do not mark inactive images corrupt
When signaling a corruption on a read-only image, qcow2 already makes
fatal events non-fatal (i.e., they will not result in the image being
closed, and the image header's corrupt flag will not be set).  This is
necessary because we cannot set the corrupt flag on read-only images,
and it is possible because further corruption of read-only images is
impossible.

Inactive images are effectively read-only, too, so we should do the same
for them.  bdrv_is_writable() can tell us whether an image can actually
be written to, so use its result instead of !bs->read_only.

(Otherwise, the assert(!(bs->open_flags & BDRV_O_INACTIVE)) in
bdrv_co_pwritev() will fail, crashing qemu.)

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180606193702.7113-3-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
(cherry picked from commit ddf3b47ef4)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:19 -05:00
Max Reitz bd64fec665 block: Make bdrv_is_writable() public
This is a useful function for the whole block layer, so make it public.
At the same time, users outside of block.c probably do not need to make
use of the reopen functionality, so rename the current function to
bdrv_is_writable_after_reopen() create a new bdrv_is_writable() function
that just passes NULL to it for the reopen queue.

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180606193702.7113-2-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
(cherry picked from commit cc02214097)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:19 -05:00
Shannon Zhao 5459c0c458 arm_gicv3_kvm: kvm_dist_get/put: skip the registers banked by GICR
While we skip the GIC_INTERNAL irqs, we don't change the register offset
accordingly. This will overlap the GICR registers value and leave the
last GIC_INTERNAL irq's registers out of update.

Fix this by skipping the registers banked by GICR.

Also for migration compatibility if the migration source (old version
qemu) doesn't send gicd_no_migration_shift_bug = 1 to destination, then
we shift the data of PPI to get the right data for SPI.

Fixes: 367b9f527b
Cc: qemu-stable@nongnu.org
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Message-id: 1527816987-16108-1-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 910e204841)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:19 -05:00
John Snow 5c9266fa97 ahci: fix PxCI register race
Fixes: https://bugs.launchpad.net/qemu/+bug/1769189

AHCI presently signals completion prior to the PxCI register being
cleared to indicate completion. If a guest driver attempts to issue
a new command in its IRQ handler, it might be surprised to learn there
is still a command pending.

In the case of Windows 10's boot driver, it will actually poll the IRQ
register hoping to find out when the command is done running -- which
will never happen, as there isn't a command running.

Fix this: clear PxCI in ahci_cmd_done and not in the asynchronous BH.
Because it now runs synchronously, we don't need to check if the command
is actually done by spying on the ATA registers. We know it's done.

CC: qemu-stable <qemu-stable@nongnu.org>
Reported-by: François Guerraz <kubrick@fgv6.net>
Tested-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180531004323.4611-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
(cherry picked from commit 5694c7eacc)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:19 -05:00
John Thomson df00a166c4 Fix libusb-1.0.22 deprecated libusb_set_debug with libusb_set_option
libusb-1.0.22 marked libusb_set_debug deprecated
it is replaced with
libusb_set_option(libusb_context, LIBUSB_OPTION_LOG_LEVEL, libusb_log_level);

details here: https://github.com/libusb/libusb/commit/539f22e2fd916558d11ab9a66f10f461c5593168

Warning here:

  CC      hw/usb/host-libusb.o
/builds/xen/src/qemu-xen/hw/usb/host-libusb.c: In function 'usb_host_init':
/builds/xen/src/qemu-xen/hw/usb/host-libusb.c:250:5: error: 'libusb_set_debug' is deprecated: Use libusb_set_option instead [-Werror=deprecated-declarations]
     libusb_set_debug(ctx, loglevel);
     ^~~~~~~~~~~~~~~~
In file included from /builds/xen/src/qemu-xen/hw/usb/host-libusb.c:40:0:
/usr/include/libusb-1.0/libusb.h:1300:18: note: declared here
 void LIBUSB_CALL libusb_set_debug(libusb_context *ctx, int level);
                  ^~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make: *** [/builds/xen/src/qemu-xen/rules.mak:66: hw/usb/host-libusb.o] Error 1
make: Leaving directory '/builds/xen/src/xen/tools/qemu-xen-build'

Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Message-id: 20180405132046.4968-1-git@johnthomson.fastmail.com.au
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 9d8fa0df49)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:19 -05:00
Shannon Zhao 77df190051 arm_gicv3_kvm: increase clroffset accordingly
It forgot to increase clroffset during the loop. So it only clear the
first 4 bytes.

Fixes: 367b9f527b
Cc: qemu-stable@nongnu.org
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1527047633-12368-1-git-send-email-zhaoshenglong@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 34ffacae08)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:19 -05:00
Peter Xu f4b4095a8f intel-iommu: rework the page walk logic
This patch fixes a potential small window that the DMA page table might
be incomplete or invalid when the guest sends domain/context
invalidations to a device.  This can cause random DMA errors for
assigned devices.

This is a major change to the VT-d shadow page walking logic. It
includes but is not limited to:

- For each VTDAddressSpace, now we maintain what IOVA ranges we have
  mapped and what we have not.  With that information, now we only send
  MAP or UNMAP when necessary.  Say, we don't send MAP notifies if we
  know we have already mapped the range, meanwhile we don't send UNMAP
  notifies if we know we never mapped the range at all.

- Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call
  in any places to resync the shadow page table for a device.

- When we receive domain/context invalidation, we should not really run
  the replay logic, instead we use the new sync shadow page table API to
  resync the whole shadow page table without unmapping the whole
  region.  After this change, we'll only do the page walk once for each
  domain invalidations (before this, it can be multiple, depending on
  number of notifiers per address space).

While at it, the page walking logic is also refactored to be simpler.

CC: QEMU Stable <qemu-stable@nongnu.org>
Reported-by: Jintack Lim <jintack@cs.columbia.edu>
Tested-by: Jintack Lim <jintack@cs.columbia.edu>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 63b88968f1)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:19 -05:00
Peter Xu 08aa25f5f8 util: implement simple iova tree
Introduce a simplest iova tree implementation based on GTree.

CC: QEMU Stable <qemu-stable@nongnu.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit eecf5eedbd)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:19 -05:00
Peter Xu d5c60a950a intel-iommu: trace domain id during page walk
This patch only modifies the trace points.

Previously we were tracing page walk levels.  They are redundant since
we have page mask (size) already.  Now we trace something much more
useful which is the domain ID of the page walking.  That can be very
useful when we trace more than one devices on the same system, so that
we can know which map is for which domain.

CC: QEMU Stable <qemu-stable@nongnu.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit d118c06ebb)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:19 -05:00
Peter Xu 78b85a98a3 intel-iommu: pass in address space when page walk
We pass in the VTDAddressSpace too.  It'll be used in the follow up
patches.

CC: QEMU Stable <qemu-stable@nongnu.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 2f764fa87d)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:18 -05:00
Peter Xu 28048f7bcd intel-iommu: introduce vtd_page_walk_info
During the recursive page walking of IOVA page tables, some stack
variables are constant variables and never changed during the whole page
walking procedure.  Isolate them into a struct so that we don't need to
pass those contants down the stack every time and multiple times.

CC: QEMU Stable <qemu-stable@nongnu.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit fe215b0cbb)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:18 -05:00
Peter Xu 1e5b93f620 intel-iommu: only do page walk for MAP notifiers
For UNMAP-only IOMMU notifiers, we don't need to walk the page tables.
Fasten that procedure by skipping the page table walk.  That should
boost performance for UNMAP-only notifiers like vhost.

CC: QEMU Stable <qemu-stable@nongnu.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 4f8a62a933)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:18 -05:00
Peter Xu 5cf61b56a4 intel-iommu: add iommu lock
SECURITY IMPLICATION: this patch fixes a potential race when multiple
threads access the IOMMU IOTLB cache.

Add a per-iommu big lock to protect IOMMU status.  Currently the only
thing to be protected is the IOTLB/context cache, since that can be
accessed even without BQL, e.g., in IO dataplane.

Note that we don't need to protect device page tables since that's fully
controlled by the guest kernel.  However there is still possibility that
malicious drivers will program the device to not obey the rule.  In that
case QEMU can't really do anything useful, instead the guest itself will
be responsible for all uncertainties.

CC: QEMU Stable <qemu-stable@nongnu.org>
Reported-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 1d9efa73e1)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:18 -05:00
Peter Xu d64604326f intel-iommu: remove IntelIOMMUNotifierNode
That is not really necessary.  Removing that node struct and put the
list entry directly into VTDAddressSpace.  It simplfies the code a lot.
Since at it, rename the old notifiers_list into vtd_as_with_notifiers.

CC: QEMU Stable <qemu-stable@nongnu.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit b4a4ba0d68)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:18 -05:00
Peter Xu 93a53137be intel-iommu: send PSI always even if across PDEs
SECURITY IMPLICATION: without this patch, any guest with both assigned
device and a vIOMMU might encounter stale IO page mappings even if guest
has already unmapped the page, which may lead to guest memory
corruption.  The stale mappings will only be limited to the guest's own
memory range, so it should not affect the host memory or other guests on
the host.

During IOVA page table walking, there is a special case when the PSI
covers one whole PDE (Page Directory Entry, which contains 512 Page
Table Entries) or more.  In the past, we skip that entry and we don't
notify the IOMMU notifiers.  This is not correct.  We should send UNMAP
notification to registered UNMAP notifiers in this case.

For UNMAP only notifiers, this might cause IOTLBs cached in the devices
even if they were already invalid.  For MAP/UNMAP notifiers like
vfio-pci, this will cause stale page mappings.

This special case doesn't trigger often, but it is very easy to be
triggered by nested device assignments, since in that case we'll
possibly map the whole L2 guest RAM region into the device's IOVA
address space (several GBs at least), which is far bigger than normal
kernel driver usages of the device (tens of MBs normally).

Without this patch applied to L1 QEMU, nested device assignment to L2
guests will dump some errors like:

qemu-system-x86_64: VFIO_MAP_DMA: -17
qemu-system-x86_64: vfio_dma_map(0x557305420c30, 0xad000, 0x1000,
                    0x7f89a920d000) = -17 (File exists)

CC: QEMU Stable <qemu-stable@nongnu.org>
Acked-by: Jason Wang <jasowang@redhat.com>
[peterx: rewrite the commit message]
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

(cherry picked from commit 36d2d52bdb)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:18 -05:00
Jan Kiszka 91f6149592 hw/intc/arm_gicv3: Fix APxR<n> register dispatching
There was a nasty flip in identifying which register group an access is
targeting. The issue caused spuriously raised priorities of the guest
when handing CPUs over in the Jailhouse hypervisor.

Cc: qemu-stable@nongnu.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-id: 28b927d3-da58-bce4-cc13-bfec7f9b1cb9@siemens.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 887aae10f6)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:18 -05:00
Michal Privoznik 81e46e3c82 console: Avoid segfault in screendump
After f771c5440e it is possible to select device and
head which to take screendump from. And even though we check if
provided head number falls within range, it may still happen that
the console has no surface yet leading to SIGSEGV:

  qemu.git $ ./x86_64-softmmu/qemu-system-x86_64 \
    -qmp stdio \
    -device virtio-vga,id=video0,max_outputs=4

  {"execute":"qmp_capabilities"}
  {"execute":"screendump", "arguments":{"filename":"/tmp/screen.ppm", "device":"video0", "head":1}}
  Segmentation fault

 #0  0x00005628249dda88 in ppm_save (filename=0x56282826cbc0 "/tmp/screen.ppm", ds=0x0, errp=0x7fff52a6fae0) at ui/console.c:304
 #1  0x00005628249ddd9b in qmp_screendump (filename=0x56282826cbc0 "/tmp/screen.ppm", has_device=true, device=0x5628276902d0 "video0", has_head=true, head=1, errp=0x7fff52a6fae0) at ui/console.c:375
 #2  0x00005628247740df in qmp_marshal_screendump (args=0x562828265e00, ret=0x7fff52a6fb68, errp=0x7fff52a6fb60) at qapi/qapi-commands-ui.c:110

Here, @ds from frame #0 (or @surface from frame #1) is
dereferenced at the very beginning of ppm_save(). And because
it's NULL crash happens.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: cb05bb1909daa6ba62145c0194aafa05a14ed3d1.1526569138.git.mprivozn@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 08d9864fa4)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:18 -05:00
Cornelia Huck a5c8fbbeac s390x/ccw: make sure all ccw devices are properly reset
Thomas reported that the subchannel for a  3270 device that ended up
in a broken state (status pending even though not enabled) did not
get out of that state even after a reboot (which involves a subsytem
reset). The reason for this is that the 3270 device did not define
a reset handler.

Let's fix this by introducing a base reset handler (set up for all
ccw devices) that resets the subchannel and have virtio-ccw call
its virtio-specific reset procedure in addition to that.

CC: qemu-stable@nongnu.org
Reported-by: Thomas Huth <thuth@redhat.com>
Suggested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
(cherry picked from commit 838fb84f83)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:18 -05:00
Cornelia Huck c9bb077871 virtio-ccw: common reset handler
All the different virtio ccw devices use the same reset handler,
so let's move setting it into the base virtio ccw device class.

CC: qemu-stable@nongnu.org
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
(cherry picked from commit 0c53057adb)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:18 -05:00
Thomas Huth 3372a3168a pc-bios/s390-ccw: struct tpi_info must be declared as aligned(4)
I've run into a compilation error today with the current version of GCC 8:

In file included from s390-ccw.h:49,
                 from main.c:12:
cio.h:128:1: error: alignment 1 of 'struct tpi_info' is less than 4 [-Werror=packed-not-aligned]
 } __attribute__ ((packed));
 ^
cc1: all warnings being treated as errors

Since the struct tpi_info contains an element ("struct subchannel_id schid")
which is marked as aligned(4), we've got to mark the struct tpi_info as
aligned(4), too.

CC: qemu-stable@nongnu.org
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525774672-11913-1-git-send-email-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
(cherry picked from commit a6e4385dea)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:17 -05:00
Cornelia Huck 87efdb9820 s390x/css: disabled subchannels cannot be status pending
The 3270 code will try to post an attention interrupt when the
3270 emulator (e.g. x3270) attaches. If the guest has not yet
enabled the subchannel for the 3270 device, we will present a spurious
cc 1 (status pending) when it uses msch on it later on, e.g. when
trying to enable the subchannel.

To fix this, just don't do anything in css_conditional_io_interrupt()
if the subchannel is not enabled. The 3270 code will work fine with
that, and the other user of this function (virtio-ccw) never
attempts to post an interrupt for a disabled device to begin with.

CC: qemu-stable@nongnu.org
Reported-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
(cherry picked from commit 6e9c893ecd)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:17 -05:00
Fam Zheng 51691e9244 raw: Check byte range uniformly
We don't verify the request range against s->size in the I/O callbacks
except for raw_co_pwritev. This is inconsistent (especially for
raw_co_pwrite_zeroes and raw_co_pdiscard), so fix them, in the meanwhile
make the helper reusable by the coming new callbacks.

Note that in most cases the block layer already verifies the request
byte range against our reported image length, before invoking the driver
callbacks.  The exception is during image creating, after
blk_set_allow_write_beyond_eof(blk, true) is called. But in that case,
the requests are not directly from the user or guest. So there is no
visible behavior change in adding the check code.

The int64_t -> uint64_t inconsistency, as shown by the type casting, is
pre-existing due to the interface.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20180601092648.24614-3-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 3844553852)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:17 -05:00
Michael Walle 4f9df08749 lm32: take BQL before writing IP/IM register
Writing to these registers may raise an interrupt request. Actually,
this prevents the milkymist board from starting.

Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Walle <michael@walle.cc>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
(cherry picked from commit 81e9cbd0ca)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:17 -05:00
Max Reitz ca3150da6d iotests: Add test for -U/force-share conflicts
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180502202051.15493-4-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
(cherry picked from commit 4e7d73c5fb)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:17 -05:00
Max Reitz 9e724c05a0 qemu-img: Use only string options in img_open_opts
img_open_opts() takes a QemuOpts and converts them to a QDict, so all
values therein are strings.  Then it may try to call qdict_get_bool(),
however, which will fail with a segmentation fault every time:

$ ./qemu-img info -U --image-opts \
    driver=file,filename=/dev/null,force-share=off
[1]    27869 segmentation fault (core dumped)  ./qemu-img info -U
--image-opts driver=file,filename=/dev/null,force-share=off

Fix this by using qdict_get_str() and comparing the value as a string.
Also, when adding a force-share value to the QDict, add it as a string
so it fits the rest of the dict.

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180502202051.15493-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
(cherry picked from commit 4615f87832)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:17 -05:00
Max Reitz e8d8f6a3aa qemu-io: Use purely string blockdev options
Currently, qemu-io only uses string-valued blockdev options (as all are
converted directly from QemuOpts) -- with one exception: -U adds the
force-share option as a boolean.  This in itself is already a bit
questionable, but a real issue is that it also assumes the value already
existing in the options QDict would be a boolean, which is wrong.

That has the following effect:

$ ./qemu-io -r -U --image-opts \
    driver=file,filename=/dev/null,force-share=off
[1]    15200 segmentation fault (core dumped)  ./qemu-io -r -U
--image-opts driver=file,filename=/dev/null,force-share=off

Since @opts is converted from QemuOpts, the value must be a string, and
we have to compare it as such.  Consequently, it makes sense to also set
it as a string instead of a boolean.

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180502202051.15493-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
(cherry picked from commit 2a01c01f9e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:17 -05:00
Max Reitz b3a18683f9 iotests: Add test for rebasing with relative paths
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509182002.8044-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
(cherry picked from commit 28036a7f70)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:17 -05:00
Max Reitz f9e0e53add qemu-img: Resolve relative backing paths in rebase
Currently, rebase interprets a relative path for the new backing image
as follows:
(1) Open the new backing image with the given relative path (thus relative to
    qemu-img's working directory).
(2) Write it directly into the overlay's backing path field (thus
    relative to the overlay).

If the overlay is not in qemu-img's working directory, both will be
different interpretations, which may either lead to an error somewhere
(either rebase fails because it cannot open the new backing image, or
your overlay becomes unusable because its backing path does not point to
a file), or, even worse, it may result in your rebase being performed
for a different backing file than what your overlay will point to after
the rebase.

Fix this by interpreting the target backing path as relative to the
overlay, like qemu-img does everywhere else.

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1569835
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180509182002.8044-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
(cherry picked from commit d16699b646)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:17 -05:00
Olaf Hering f81672a5c6 configure: recognize more rpmbuild macros
Extend the list of recognized, but ignored options from rpms %configure
macro. This fixes build on hosts running SUSE Linux.

Cc: qemu-stable@nongnu.org
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Message-Id: <20180418075045.27393-1-olaf@aepfle.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 181ce1d05c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:17 -05:00
Gerd Hoffmann 9ec09b6542 qxl: fix local renderer crash
Make sure we only ask the spice local renderer for display updates in
case we have a valid primary surface.  Without that spice is confused
and throws errors in case a display update request (triggered by
screendump for example) happens in parallel to a mode switch and hits
the race window where the old primary surface is gone and the new isn't
establisted yet.

Cc: qemu-stable@nongnu.org
Fixes: https://bugzilla.redhat.com//show_bug.cgi?id=1567733
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180427115528.345-1-kraxel@redhat.com
(cherry picked from commit 5bd5c27c7d)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:16 -05:00
Greg Kurz 2dbaba7af0 spapr: don't advertise radix GTSE if max-compat-cpu < power9
On a POWER9 host, if a guest runs in pre POWER9 compat mode, it necessarily
uses the hash MMU mode. In this case, we shouldn't advertise radix GTSE in
the ibm,arch-vec-5-platform-support DT property as the current code does.
The first reason is that it doesn't make sense, and the second one is that
causes the CAS-negotiated options subsection to be migrated. This breaks
backward migration to QEMU 2.7 and older versions on POWER8 hosts:

qemu-system-ppc64: error while loading state for instance 0x0 of device
 'spapr'
qemu-system-ppc64: load of migration failed: No such file or directory

This patch hence initialize CPUs a bit earlier so that we can check the
requested compat mode, and don't set OV5_MMU_RADIX_GTSE for power8 and
older.

Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
(cherry picked from commit 0550b1206a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:16 -05:00
Greg Kurz 62f7a38610 target/ppc: always set PPC_MEM_TLBIE in pre 2.8 migration hack
The pseries-2.7 and older machine types require CPUPPCState::insns_flags
to be strictly equal between source and destination. This checking is
abusive and breaks migration of KVM guests when the host CPU models
are different, even if they are compatible enough to allow the guest
to run transparently. This buggy behaviour was fixed for pseries-2.8
and we added some hacks to allow backward migration of older machine
types. These hacks assume that the CPU belongs to the POWER8 family,
which was true for most KVM based setup we cared about at the time.
But now POWER9 systems are coming, and backward migration of pre 2.8
guests running in POWER8 architected mode from a POWER9 host to a
POWER8 host is broken:

qemu-system-ppc64: error while loading state for instance 0x0 of device
 'cpu'
qemu-system-ppc64: load of migration failed: Invalid argument

This happens because POWER9 doesn't set PPC_MEM_TLBIE in insns_flags,
while POWER8 does. Let's force PPC_MEM_TLBIE in the migration hack to
fix the issue. This is an acceptable hack because these old machine
types only support CPU models that do set PPC_MEM_TLBIE.

Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
(cherry picked from commit bce009645b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:16 -05:00
Peter Maydell 1ace462f9b target/arm: Implement v8M VLLDM and VLSTM
For v8M the instructions VLLDM and VLSTM support lazy saving
and restoring of the secure floating-point registers. Even
if the floating point extension is not implemented, these
instructions must act as NOPs in Secure state, so they can
be used as part of the secure-to-nonsecure call sequence.

Fixes: https://bugs.launchpad.net/qemu/+bug/1768295
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180503105730.5958-1-peter.maydell@linaro.org
(cherry picked from commit b1e5336a98)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:16 -05:00
Henry Wertz b90c93106e tcg/arm: Fix memory barrier encoding
I found with qemu 2.11.x or newer that I would get an illegal instruction
error running some Intel binaries on my ARM chromebook.  On investigation,
I found it was quitting on memory barriers.

qemu instruction:
mb $0x31
was translating as:
0x604050cc:  5bf07ff5  blpl     #0x600250a8

After patch it gives:
0x604050cc:  f57ff05b  dmb      ish

In short, I found INSN_DMB_ISH (memory barrier for ARMv7) appeared to be
correct based on online docs, but due to some endian-related shenanigans it
had to be byte-swapped to suit qemu; it appears INSN_DMB_MCR (memory
barrier for ARMv6) also should be byte swapped  (and this patch does so).
I have not checked for correctness of aarch64's barrier instruction.

Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Henry Wertz <hwertz10@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 3f814b8037)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:16 -05:00
Cornelia Huck 38b7a3ea72 s390-ccw: force diag 308 subcode to unsigned long
We currently pass an integer as the subcode parameter. However,
the upper bits of the register containing the subcode need to
be 0, which is not guaranteed unless we explicitly specify the
subcode to be an unsigned long value.

Fixes: d046c51dad ("pc-bios/s390-ccw: Get device address via diag 308/6")
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 63d8b5ace3)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:16 -05:00
Eric Blake cb7a41f3f9 nbd/client: Fix error messages during NBD_INFO_BLOCK_SIZE
A missing space makes for poor error messages, and sizes can't
go negative.  Also, we missed diagnosing a server that sends
a maximum block size less than the minimum.

Fixes: 081dd1fe
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180501154654.943782-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
(cherry picked from commit e475d108f1)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:16 -05:00
Jason Andryuk 8ca471da10 ccid: Fix dwProtocols advertisement of T=0
Commit d7d218ef02 attempted to change
dwProtocols to only advertise support for T=0 and not T=1.  The change
was incorrect as it changed 0x00000003 to 0x00010000.

lsusb -v in a linux guest shows:
"dwProtocols         65536  (Invalid values detected)", though the
smart card could still be accessed.  Windows 7 does not detect inserted
smart cards and logs the the following Error in the Event Logs:

    Source: Smart Card Service
    Event ID: 610
    Smart Card Reader 'QEMU QEMU USB CCID 0' rejected IOCTL SET_PROTOCOL:
    Incorrect function. If this error persists, your smart card or reader
    may not be functioning correctly

    Command Header: 03 00 00 00

Setting to 0x00000001 fixes the Windows issue.

Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Message-id: 20180420183219.20722-1-jandryuk@gmail.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 0ee86bb6c5)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:16 -05:00
Geert Uytterhoeven 1783745673 device_tree: Increase FDT_MAX_SIZE to 1 MiB
It is not uncommon for a contemporary FDT to be larger than 64 KiB,
leading to failures loading the device tree from sysfs:

    qemu-system-aarch64: qemu_fdt_setprop: Couldn't set ...: FDT_ERR_NOSPACE

Hence increase the limit to 1 MiB, like on PPC.

For reference, the largest arm64 DTB created from the Linux sources is
ca. 75 KiB large (100 KiB when built with symbols/fixup support).

Cc: qemu-stable@nongnu.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Message-id: 1523541337-23919-1-git-send-email-geert+renesas@glider.be
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 14ec3cbd7c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:16 -05:00
Marc-André Lureau 4319ae939c tests: fix tpm-crb tpm-tis tests race
No need to close the TPM data socket on the emulator end, qemu will
close it after a SHUTDOWN. This avoids a race between close() and
read() in the TPM data thread.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 7647d5c6b5)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-11 11:48:16 -05:00
6866 changed files with 289087 additions and 779160 deletions

No files matched your search

-42
View File
@@ -1,42 +0,0 @@
env:
CIRRUS_CLONE_DEPTH: 1
freebsd_12_task:
freebsd_instance:
image: freebsd-12-0-release-amd64
cpu: 8
memory: 8G
install_script: pkg install -y
bash bison curl cyrus-sasl git glib gmake gnutls gsed
nettle perl5 pixman pkgconf png usbredir
script:
- mkdir build
- cd build
- ../configure || { cat config.log; exit 1; }
- gmake -j8
- gmake -j8 V=1 check
macos_task:
osx_instance:
image: mojave-base
install_script:
- brew install pkg-config python gnu-sed glib pixman make sdl2
script:
- mkdir build
- cd build
- ../configure --python=/usr/local/bin/python3 || { cat config.log; exit 1; }
- gmake -j$(sysctl -n hw.ncpu)
- gmake check -j$(sysctl -n hw.ncpu)
macos_xcode_task:
osx_instance:
# this is an alias for the latest Xcode
image: mojave-xcode
install_script:
- brew install pkg-config gnu-sed glib pixman make sdl2
script:
- mkdir build
- cd build
- ../configure --cc=clang || { cat config.log; exit 1; }
- gmake -j$(sysctl -n hw.ncpu)
- gmake check -j$(sysctl -n hw.ncpu)
+1 -29
View File
@@ -1,10 +1,4 @@
# EditorConfig is a file format and collection of text editor plugins
# for maintaining consistent coding styles between different editors
# and IDEs. Most popular editors support this either natively or via
# plugin.
#
# Check https://editorconfig.org for details.
# http://editorconfig.org
root = true
[*]
@@ -12,32 +6,10 @@ end_of_line = lf
insert_final_newline = true
charset = utf-8
[*.mak]
indent_style = tab
indent_size = 8
file_type_emacs = makefile
[Makefile*]
indent_style = tab
indent_size = 8
file_type_emacs = makefile
[*.{c,h}]
indent_style = space
indent_size = 4
[*.sh]
indent_style = space
indent_size = 4
[*.{s,S}]
indent_style = tab
indent_size = 8
file_type_emacs = asm
[*.{vert,frag}]
file_type_emacs = glsl
[*.json]
indent_style = space
file_type_emacs = python
-34
View File
@@ -1,34 +0,0 @@
# Configuration for Repo Lockdown - https://github.com/dessant/repo-lockdown
# Close issues and pull requests
close: true
# Lock issues and pull requests
lock: true
issues:
comment: |
Thank you for your interest in the QEMU project.
This repository is a read-only mirror of the project's master
repostories hosted on https://git.qemu.org/git/qemu.git.
The project does not process issues filed on GitHub.
The project issues are tracked on Launchpad:
https://bugs.launchpad.net/qemu
QEMU welcomes bug report contributions. You can file new ones on:
https://bugs.launchpad.net/qemu/+filebug
pulls:
comment: |
Thank you for your interest in the QEMU project.
This repository is a read-only mirror of the project's master
repostories hosted on https://git.qemu.org/git/qemu.git.
The project does not process merge requests filed on GitHub.
QEMU welcomes contributions of code (either fixing bugs or adding new
functionality). However, we get a lot of patches, and so we have some
guidelines about contributing on the project website:
https://www.qemu.org/contribute/
+67 -22
View File
@@ -1,4 +1,3 @@
/.doctrees
/config-devices.*
/config-all-devices.*
/config-all-disas.*
@@ -6,8 +5,6 @@
/config-target.*
/config.status
/config-temp
/tools/virtiofsd/50-qemu-virtiofsd.json
/elf2dmp
/trace-events-all
/trace/generated-events.h
/trace/generated-events.c
@@ -33,20 +30,79 @@
/qapi-gen-timestamp
/qapi/qapi-builtin-types.[ch]
/qapi/qapi-builtin-visit.[ch]
/qapi/qapi-commands-*.[ch]
/qapi/qapi-commands-block-core.[ch]
/qapi/qapi-commands-block.[ch]
/qapi/qapi-commands-char.[ch]
/qapi/qapi-commands-common.[ch]
/qapi/qapi-commands-crypto.[ch]
/qapi/qapi-commands-introspect.[ch]
/qapi/qapi-commands-migration.[ch]
/qapi/qapi-commands-misc.[ch]
/qapi/qapi-commands-net.[ch]
/qapi/qapi-commands-rocker.[ch]
/qapi/qapi-commands-run-state.[ch]
/qapi/qapi-commands-sockets.[ch]
/qapi/qapi-commands-tpm.[ch]
/qapi/qapi-commands-trace.[ch]
/qapi/qapi-commands-transaction.[ch]
/qapi/qapi-commands-ui.[ch]
/qapi/qapi-commands.[ch]
/qapi/qapi-emit-events.[ch]
/qapi/qapi-events-*.[ch]
/qapi/qapi-events-block-core.[ch]
/qapi/qapi-events-block.[ch]
/qapi/qapi-events-char.[ch]
/qapi/qapi-events-common.[ch]
/qapi/qapi-events-crypto.[ch]
/qapi/qapi-events-introspect.[ch]
/qapi/qapi-events-migration.[ch]
/qapi/qapi-events-misc.[ch]
/qapi/qapi-events-net.[ch]
/qapi/qapi-events-rocker.[ch]
/qapi/qapi-events-run-state.[ch]
/qapi/qapi-events-sockets.[ch]
/qapi/qapi-events-tpm.[ch]
/qapi/qapi-events-trace.[ch]
/qapi/qapi-events-transaction.[ch]
/qapi/qapi-events-ui.[ch]
/qapi/qapi-events.[ch]
/qapi/qapi-init-commands.[ch]
/qapi/qapi-introspect.[ch]
/qapi/qapi-types-*.[ch]
/qapi/qapi-types-block-core.[ch]
/qapi/qapi-types-block.[ch]
/qapi/qapi-types-char.[ch]
/qapi/qapi-types-common.[ch]
/qapi/qapi-types-crypto.[ch]
/qapi/qapi-types-introspect.[ch]
/qapi/qapi-types-migration.[ch]
/qapi/qapi-types-misc.[ch]
/qapi/qapi-types-net.[ch]
/qapi/qapi-types-rocker.[ch]
/qapi/qapi-types-run-state.[ch]
/qapi/qapi-types-sockets.[ch]
/qapi/qapi-types-tpm.[ch]
/qapi/qapi-types-trace.[ch]
/qapi/qapi-types-transaction.[ch]
/qapi/qapi-types-ui.[ch]
/qapi/qapi-types.[ch]
/qapi/qapi-visit-*.[ch]
!/qapi/qapi-visit-core.c
/qapi/qapi-visit-block-core.[ch]
/qapi/qapi-visit-block.[ch]
/qapi/qapi-visit-char.[ch]
/qapi/qapi-visit-common.[ch]
/qapi/qapi-visit-crypto.[ch]
/qapi/qapi-visit-introspect.[ch]
/qapi/qapi-visit-migration.[ch]
/qapi/qapi-visit-misc.[ch]
/qapi/qapi-visit-net.[ch]
/qapi/qapi-visit-rocker.[ch]
/qapi/qapi-visit-run-state.[ch]
/qapi/qapi-visit-sockets.[ch]
/qapi/qapi-visit-tpm.[ch]
/qapi/qapi-visit-trace.[ch]
/qapi/qapi-visit-transaction.[ch]
/qapi/qapi-visit-ui.[ch]
/qapi/qapi-visit.[ch]
/qapi/qapi-doc.texi
/qemu-edid
/qemu-doc.html
/qemu-doc.info
/qemu-doc.txt
/qemu-img
/qemu-nbd
/qemu-options.def
@@ -65,8 +121,6 @@
/scsi/qemu-pr-helper
/vhost-user-scsi
/vhost-user-blk
/vhost-user-gpu
/vhost-user-input
/fsdev/virtfs-proxy-helper
*.tmp
*.[1-9]
@@ -97,9 +151,7 @@
.sdk
*.gcda
*.gcno
*.gcov
/pc-bios/bios-pq/status
/pc-bios/edk2-*.fd
/pc-bios/vgabios-pq/status
/pc-bios/optionrom/linuxboot.asm
/pc-bios/optionrom/linuxboot.bin
@@ -109,10 +161,6 @@
/pc-bios/optionrom/linuxboot_dma.bin
/pc-bios/optionrom/linuxboot_dma.raw
/pc-bios/optionrom/linuxboot_dma.img
/pc-bios/optionrom/pvh.asm
/pc-bios/optionrom/pvh.bin
/pc-bios/optionrom/pvh.raw
/pc-bios/optionrom/pvh.img
/pc-bios/optionrom/multiboot.asm
/pc-bios/optionrom/multiboot.bin
/pc-bios/optionrom/multiboot.raw
@@ -123,7 +171,6 @@
/pc-bios/optionrom/kvmvapic.img
/pc-bios/s390-ccw/s390-ccw.elf
/pc-bios/s390-ccw/s390-ccw.img
/docs/built
/docs/interop/qemu-ga-qapi.texi
/docs/interop/qemu-ga-ref.html
/docs/interop/qemu-ga-ref.info*
@@ -133,7 +180,6 @@
/docs/interop/qemu-qmp-ref.info*
/docs/interop/qemu-qmp-ref.txt
/docs/version.texi
/contrib/vhost-user-gpu/50-qemu-gpu.json
*.tps
.stgit-*
.git-submodule-status
@@ -160,4 +206,3 @@ trace-dtrace-root.h
trace-dtrace-root.dtrace
trace-ust-all.h
trace-ust-all.c
/target/arm/decode-sve.inc.c
-49
View File
@@ -1,49 +0,0 @@
docker-edk2:
stage: build
rules: # Only run this job when the Dockerfile is modified
- changes:
- .gitlab-ci-edk2.yml
- .gitlab-ci.d/edk2/Dockerfile
when: always
image: docker:19.03.1
services:
- docker:19.03.1-dind
variables:
GIT_DEPTH: 3
IMAGE_TAG: $CI_REGISTRY_IMAGE:edk2-cross-build
# We don't use TLS
DOCKER_HOST: tcp://docker:2375
DOCKER_TLS_CERTDIR: ""
before_script:
- docker login -u $CI_REGISTRY_USER -p $CI_REGISTRY_PASSWORD $CI_REGISTRY
script:
- docker pull $IMAGE_TAG || true
- docker build --cache-from $IMAGE_TAG --tag $CI_REGISTRY_IMAGE:$CI_COMMIT_SHA
--tag $IMAGE_TAG .gitlab-ci.d/edk2
- docker push $CI_REGISTRY_IMAGE:$CI_COMMIT_SHA
- docker push $IMAGE_TAG
build-edk2:
rules: # Only run this job when ...
- changes: # ... roms/edk2/ is modified (submodule updated)
- roms/edk2/*
when: always
- if: '$CI_COMMIT_REF_NAME =~ /^edk2/' # or the branch/tag starts with 'edk2'
when: always
- if: '$CI_COMMIT_MESSAGE =~ /edk2/i' # or last commit description contains 'EDK2'
when: always
artifacts:
paths: # 'artifacts.zip' will contains the following files:
- pc-bios/edk2*bz2
- pc-bios/edk2-licenses.txt
- edk2-stdout.log
- edk2-stderr.log
image: $CI_REGISTRY_IMAGE:edk2-cross-build
variables:
GIT_DEPTH: 3
script: # Clone the required submodules and build EDK2
- git submodule update --init roms/edk2
- git -C roms/edk2 submodule update --init
- export JOBS=$(($(getconf _NPROCESSORS_ONLN) + 1))
- echo "=== Using ${JOBS} simultaneous jobs ==="
- make -j${JOBS} -C roms efi 2>&1 1>edk2-stdout.log | tee -a edk2-stderr.log >&2
-63
View File
@@ -1,63 +0,0 @@
docker-opensbi:
stage: build
rules: # Only run this job when the Dockerfile is modified
- changes:
- .gitlab-ci-opensbi.yml
- .gitlab-ci.d/opensbi/Dockerfile
when: always
image: docker:19.03.1
services:
- docker:19.03.1-dind
variables:
GIT_DEPTH: 3
IMAGE_TAG: $CI_REGISTRY_IMAGE:opensbi-cross-build
# We don't use TLS
DOCKER_HOST: tcp://docker:2375
DOCKER_TLS_CERTDIR: ""
before_script:
- docker login -u $CI_REGISTRY_USER -p $CI_REGISTRY_PASSWORD $CI_REGISTRY
script:
- docker pull $IMAGE_TAG || true
- docker build --cache-from $IMAGE_TAG --tag $CI_REGISTRY_IMAGE:$CI_COMMIT_SHA
--tag $IMAGE_TAG .gitlab-ci.d/opensbi
- docker push $CI_REGISTRY_IMAGE:$CI_COMMIT_SHA
- docker push $IMAGE_TAG
build-opensbi:
rules: # Only run this job when ...
- changes: # ... roms/opensbi/ is modified (submodule updated)
- roms/opensbi/*
when: always
- if: '$CI_COMMIT_REF_NAME =~ /^opensbi/' # or the branch/tag starts with 'opensbi'
when: always
- if: '$CI_COMMIT_MESSAGE =~ /opensbi/i' # or last commit description contains 'OpenSBI'
when: always
artifacts:
paths: # 'artifacts.zip' will contains the following files:
- pc-bios/opensbi-riscv32-sifive_u-fw_jump.bin
- pc-bios/opensbi-riscv32-virt-fw_jump.bin
- pc-bios/opensbi-riscv64-sifive_u-fw_jump.bin
- pc-bios/opensbi-riscv64-virt-fw_jump.bin
- opensbi32-virt-stdout.log
- opensbi32-virt-stderr.log
- opensbi64-virt-stdout.log
- opensbi64-virt-stderr.log
- opensbi32-sifive_u-stdout.log
- opensbi32-sifive_u-stderr.log
- opensbi64-sifive_u-stdout.log
- opensbi64-sifive_u-stderr.log
image: $CI_REGISTRY_IMAGE:opensbi-cross-build
variables:
GIT_DEPTH: 3
script: # Clone the required submodules and build OpenSBI
- git submodule update --init roms/opensbi
- export JOBS=$(($(getconf _NPROCESSORS_ONLN) + 1))
- echo "=== Using ${JOBS} simultaneous jobs ==="
- make -j${JOBS} -C roms/opensbi clean
- make -j${JOBS} -C roms opensbi32-virt 2>&1 1>opensbi32-virt-stdout.log | tee -a opensbi32-virt-stderr.log >&2
- make -j${JOBS} -C roms/opensbi clean
- make -j${JOBS} -C roms opensbi64-virt 2>&1 1>opensbi64-virt-stdout.log | tee -a opensbi64-virt-stderr.log >&2
- make -j${JOBS} -C roms/opensbi clean
- make -j${JOBS} -C roms opensbi32-sifive_u 2>&1 1>opensbi32-sifive_u-stdout.log | tee -a opensbi32-sifive_u-stderr.log >&2
- make -j${JOBS} -C roms/opensbi clean
- make -j${JOBS} -C roms opensbi64-sifive_u 2>&1 1>opensbi64-sifive_u-stdout.log | tee -a opensbi64-sifive_u-stderr.log >&2
-27
View File
@@ -1,27 +0,0 @@
#
# Docker image to cross-compile EDK2 firmware binaries
#
FROM ubuntu:16.04
MAINTAINER Philippe Mathieu-Daudé <philmd@redhat.com>
# Install packages required to build EDK2
RUN apt update \
&& \
\
DEBIAN_FRONTEND=noninteractive \
apt install --assume-yes --no-install-recommends \
build-essential \
ca-certificates \
dos2unix \
gcc-aarch64-linux-gnu \
gcc-arm-linux-gnueabi \
git \
iasl \
make \
nasm \
python \
uuid-dev \
&& \
\
rm -rf /var/lib/apt/lists/*
-33
View File
@@ -1,33 +0,0 @@
#
# Docker image to cross-compile OpenSBI firmware binaries
#
FROM ubuntu:18.04
MAINTAINER Bin Meng <bmeng.cn@gmail.com>
# Install packages required to build OpenSBI
RUN apt update \
&& \
\
DEBIAN_FRONTEND=noninteractive \
apt install --assume-yes --no-install-recommends \
build-essential \
ca-certificates \
git \
make \
wget \
&& \
\
rm -rf /var/lib/apt/lists/*
# Manually install the kernel.org "Crosstool" based toolchains for gcc-8.3
RUN wget -O - \
https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/8.3.0/x86_64-gcc-8.3.0-nolibc-riscv32-linux.tar.xz \
| tar -C /opt -xJ
RUN wget -O - \
https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/8.3.0/x86_64-gcc-8.3.0-nolibc-riscv64-linux.tar.xz \
| tar -C /opt -xJ
# Export the toolchains to the system path
ENV PATH="/opt/gcc-8.3.0-nolibc/riscv32-linux/bin:${PATH}"
ENV PATH="/opt/gcc-8.3.0-nolibc/riscv64-linux/bin:${PATH}"
-104
View File
@@ -1,104 +0,0 @@
include:
- local: '/.gitlab-ci-edk2.yml'
- local: '/.gitlab-ci-opensbi.yml'
before_script:
- apt-get update -qq
- apt-get install -y -qq flex bison libglib2.0-dev libpixman-1-dev genisoimage
build-system1:
script:
- apt-get install -y -qq libgtk-3-dev libvte-dev nettle-dev libcacard-dev
libusb-dev libvde-dev libspice-protocol-dev libgl1-mesa-dev libvdeplug-dev
- mkdir build
- cd build
- ../configure --enable-werror --target-list="aarch64-softmmu alpha-softmmu
cris-softmmu hppa-softmmu lm32-softmmu moxie-softmmu microblazeel-softmmu
mips64el-softmmu m68k-softmmu ppc-softmmu riscv64-softmmu sparc-softmmu"
- make -j2
- make -j2 check
build-system2:
script:
- apt-get install -y -qq libsdl2-dev libgcrypt-dev libbrlapi-dev libaio-dev
libfdt-dev liblzo2-dev librdmacm-dev libibverbs-dev libibumad-dev
libzstd-dev
- mkdir build
- cd build
- ../configure --enable-werror --target-list="tricore-softmmu unicore32-softmmu
microblaze-softmmu mips-softmmu riscv32-softmmu s390x-softmmu sh4-softmmu
sparc64-softmmu x86_64-softmmu xtensa-softmmu nios2-softmmu or1k-softmmu"
- make -j2
- make -j2 check
build-disabled:
script:
- mkdir build
- cd build
- ../configure --enable-werror --disable-rdma --disable-slirp --disable-curl
--disable-capstone --disable-live-block-migration --disable-glusterfs
--disable-replication --disable-coroutine-pool --disable-smartcard
--disable-guest-agent --disable-curses --disable-libxml2 --disable-tpm
--disable-qom-cast-debug --disable-spice --disable-vhost-vsock
--disable-vhost-net --disable-vhost-crypto --disable-vhost-user
--target-list="i386-softmmu ppc64-softmmu mips64-softmmu i386-linux-user"
- make -j2
- make -j2 check-qtest SPEED=slow
build-tcg-disabled:
script:
- apt-get install -y -qq clang libgtk-3-dev libusb-dev
- mkdir build
- cd build
- ../configure --cc=clang --enable-werror --disable-tcg --audio-drv-list=""
- make -j2
- make check-unit
- make check-qapi-schema
- cd tests/qemu-iotests/
- ./check -raw 001 002 003 004 005 008 009 010 011 012 021 025 032 033 048
052 063 077 086 101 104 106 113 148 150 151 152 157 159 160 163
170 171 183 184 192 194 197 208 215 221 222 226 227 236 253 277
- ./check -qcow2 028 051 056 057 058 065 067 068 082 085 091 095 096 102 122
124 132 139 142 144 145 151 152 155 157 165 194 196 197 200 202
208 209 215 216 218 222 227 234 246 247 248 250 254 255 257 258
260 261 262 263 264 270 272 273 277 279
build-user:
script:
- mkdir build
- cd build
- ../configure --enable-werror --disable-system --disable-guest-agent
--disable-capstone --disable-slirp --disable-fdt
- make -j2
- make run-tcg-tests-i386-linux-user run-tcg-tests-x86_64-linux-user
build-clang:
script:
- apt-get install -y -qq clang libsdl2-dev libattr1-dev libcap-ng-dev
xfslibs-dev libiscsi-dev libnfs-dev libseccomp-dev gnutls-dev librbd-dev
- mkdir build
- cd build
- ../configure --cc=clang --cxx=clang++ --enable-werror
--target-list="alpha-softmmu arm-softmmu m68k-softmmu mips64-softmmu
ppc-softmmu s390x-softmmu x86_64-softmmu arm-linux-user"
- make -j2
- make -j2 check
build-tci:
script:
- TARGETS="aarch64 alpha arm hppa m68k microblaze moxie ppc64 s390x x86_64"
- mkdir build
- cd build
- ../configure --enable-tcg-interpreter
--target-list="$(for tg in $TARGETS; do echo -n ${tg}'-softmmu '; done)"
- make -j2
- make run-tcg-tests-x86_64-softmmu
- make tests/qtest/boot-serial-test tests/qtest/cdrom-test tests/qtest/pxe-test
- for tg in $TARGETS ; do
export QTEST_QEMU_BINARY="${tg}-softmmu/qemu-system-${tg}" ;
./tests/qtest/boot-serial-test || exit 1 ;
./tests/qtest/cdrom-test || exit 1 ;
done
- QTEST_QEMU_BINARY="x86_64-softmmu/qemu-system-x86_64" ./tests/qtest/pxe-test
- QTEST_QEMU_BINARY="s390x-softmmu/qemu-system-s390x"
./tests/qtest/pxe-test -m slow
+20 -32
View File
@@ -1,60 +1,48 @@
[submodule "roms/vgabios"]
path = roms/vgabios
url = git://git.qemu-project.org/vgabios.git/
[submodule "roms/seabios"]
path = roms/seabios
url = https://git.qemu.org/git/seabios.git/
url = git://git.qemu-project.org/seabios.git/
[submodule "roms/SLOF"]
path = roms/SLOF
url = https://git.qemu.org/git/SLOF.git
url = git://git.qemu-project.org/SLOF.git
[submodule "roms/ipxe"]
path = roms/ipxe
url = https://git.qemu.org/git/ipxe.git
url = git://git.qemu-project.org/ipxe.git
[submodule "roms/openbios"]
path = roms/openbios
url = https://git.qemu.org/git/openbios.git
url = git://git.qemu-project.org/openbios.git
[submodule "roms/openhackware"]
path = roms/openhackware
url = git://git.qemu-project.org/openhackware.git
[submodule "roms/qemu-palcode"]
path = roms/qemu-palcode
url = https://git.qemu.org/git/qemu-palcode.git
url = git://git.qemu.org/qemu-palcode.git
[submodule "roms/sgabios"]
path = roms/sgabios
url = https://git.qemu.org/git/sgabios.git
url = git://git.qemu-project.org/sgabios.git
[submodule "dtc"]
path = dtc
url = https://git.qemu.org/git/dtc.git
url = git://git.qemu-project.org/dtc.git
[submodule "roms/u-boot"]
path = roms/u-boot
url = https://git.qemu.org/git/u-boot.git
url = git://git.qemu-project.org/u-boot.git
[submodule "roms/skiboot"]
path = roms/skiboot
url = https://git.qemu.org/git/skiboot.git
url = git://git.qemu.org/skiboot.git
[submodule "roms/QemuMacDrivers"]
path = roms/QemuMacDrivers
url = https://git.qemu.org/git/QemuMacDrivers.git
url = git://git.qemu.org/QemuMacDrivers.git
[submodule "ui/keycodemapdb"]
path = ui/keycodemapdb
url = https://git.qemu.org/git/keycodemapdb.git
url = git://git.qemu.org/keycodemapdb.git
[submodule "capstone"]
path = capstone
url = https://git.qemu.org/git/capstone.git
url = git://git.qemu.org/capstone.git
[submodule "roms/seabios-hppa"]
path = roms/seabios-hppa
url = https://git.qemu.org/git/seabios-hppa.git
url = git://github.com/hdeller/seabios-hppa.git
[submodule "roms/u-boot-sam460ex"]
path = roms/u-boot-sam460ex
url = https://git.qemu.org/git/u-boot-sam460ex.git
[submodule "tests/fp/berkeley-testfloat-3"]
path = tests/fp/berkeley-testfloat-3
url = https://git.qemu.org/git/berkeley-testfloat-3.git
[submodule "tests/fp/berkeley-softfloat-3"]
path = tests/fp/berkeley-softfloat-3
url = https://git.qemu.org/git/berkeley-softfloat-3.git
[submodule "roms/edk2"]
path = roms/edk2
url = https://git.qemu.org/git/edk2.git
[submodule "slirp"]
path = slirp
url = https://git.qemu.org/git/libslirp.git
[submodule "roms/opensbi"]
path = roms/opensbi
url = https://git.qemu.org/git/opensbi.git
[submodule "roms/qboot"]
path = roms/qboot
url = https://github.com/bonzini/qboot
url = git://git.qemu.org/u-boot-sam460ex.git
+5 -135
View File
@@ -1,29 +1,19 @@
# This mailmap fixes up author names/addresses.
#
# If you are adding to this file consider if a similar change needs to
# be made to contrib/gitdm/aliases. They are not however completely
# analogous. .mailmap is concerned with fixing up damaged author
# fields where as the gitdm equivalent is more concerned with making
# sure multiple email addresses get mapped onto the same author.
#
# From man git-shortlog the forms are:
#
# Proper Name <commit@email.xx>
# <proper@email.xx> <commit@email.xx>
# Proper Name <proper@email.xx> <commit@email.xx>
# Proper Name <proper@email.xx> Commit Name <commit@email.xx>
#
# The first section translates weird addresses from the original git import
# into proper addresses so that they are counted properly by git shortlog.
Andrzej Zaborowski <balrogg@gmail.com> balrog <balrog@c046a42c-6fe2-441c-8c8c-71466251a162>
Anthony Liguori <anthony@codemonkey.ws> aliguori <aliguori@c046a42c-6fe2-441c-8c8c-71466251a162>
Anthony Liguori <anthony@codemonkey.ws> Anthony Liguori <aliguori@us.ibm.com>
Aurelien Jarno <aurelien@aurel32.net> aurel32 <aurel32@c046a42c-6fe2-441c-8c8c-71466251a162>
Blue Swirl <blauwirbel@gmail.com> blueswir1 <blueswir1@c046a42c-6fe2-441c-8c8c-71466251a162>
Edgar E. Iglesias <edgar.iglesias@gmail.com> edgar_igl <edgar_igl@c046a42c-6fe2-441c-8c8c-71466251a162>
Fabrice Bellard <fabrice@bellard.org> bellard <bellard@c046a42c-6fe2-441c-8c8c-71466251a162>
James Hogan <jhogan@kernel.org> <james.hogan@imgtec.com>
Jocelyn Mayer <l_indien@magic.fr> j_mayer <j_mayer@c046a42c-6fe2-441c-8c8c-71466251a162>
Paul Brook <paul@codesourcery.com> pbrook <pbrook@c046a42c-6fe2-441c-8c8c-71466251a162>
Paul Burton <paul.burton@mips.com> <paul.burton@imgtec.com>
Paul Burton <paul.burton@mips.com> <paul@archlinuxmips.org>
Thiemo Seufer <ths@networkno.de> ths <ths@c046a42c-6fe2-441c-8c8c-71466251a162>
malc <av1474@comtv.ru> malc <malc@c046a42c-6fe2-441c-8c8c-71466251a162>
@@ -38,127 +28,7 @@ Ian McKellar <ianloic@google.com> Ian McKellar via Qemu-devel <qemu-devel@nongnu
Julia Suvorova <jusual@mail.ru> Julia Suvorova via Qemu-devel <qemu-devel@nongnu.org>
Justin Terry (VM) <juterry@microsoft.com> Justin Terry (VM) via Qemu-devel <qemu-devel@nongnu.org>
# Next, replace old addresses by a more recent one.
Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> <aleksandar.markovic@mips.com>
Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> <aleksandar.markovic@imgtec.com>
Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> <amarkovic@wavecomp.com>
Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> <arikalo@wavecomp.com>
Anthony Liguori <anthony@codemonkey.ws> Anthony Liguori <aliguori@us.ibm.com>
James Hogan <jhogan@kernel.org> <james.hogan@imgtec.com>
Leif Lindholm <leif@nuviainc.com> <leif.lindholm@linaro.org>
Paul Burton <pburton@wavecomp.com> <paul.burton@mips.com>
Paul Burton <pburton@wavecomp.com> <paul.burton@imgtec.com>
Paul Burton <pburton@wavecomp.com> <paul@archlinuxmips.org>
Philippe Mathieu-Daudé <philmd@redhat.com> <f4bug@amsat.org>
Yongbok Kim <yongbok.kim@mips.com> <yongbok.kim@imgtec.com>
# Also list preferred name forms where people have changed their
# git author config, or had utf8/latin1 encoding issues.
Aaron Lindsay <aaron@os.amperecomputing.com>
Alexey Gerasimenko <x1917x@gmail.com>
Alex Ivanov <void@aleksoft.net>
Andreas Färber <afaerber@suse.de>
Bandan Das <bsd@redhat.com>
Benjamin MARSILI <mlspirat42@gmail.com>
Benoît Canet <benoit.canet@gmail.com>
Benoît Canet <benoit.canet@irqsave.net>
Benoît Canet <benoit.canet@nodalink.com>
Boqun Feng <boqun.feng@gmail.com>
Boqun Feng <boqun.feng@intel.com>
Brad Smith <brad@comstyle.com>
Brijesh Singh <brijesh.singh@amd.com>
Brilly Wu <brillywu@viatech.com.cn>
Cédric Vincent <cedric.vincent@st.com>
CheneyLin <linzc@zju.edu.cn>
Chen Gang <chengang@emindsoft.com.cn>
Chen Gang <gang.chen.5i5j@gmail.com>
Chen Gang <gang.chen@sunrus.com.cn>
Chen Wei-Ren <chenwj@iis.sinica.edu.tw>
Christophe Lyon <christophe.lyon@st.com>
Collin L. Walling <walling@linux.ibm.com>
# git author config
Daniel P. Berrangé <berrange@redhat.com>
Eduardo Otubo <otubo@redhat.com>
Fabrice Desclaux <fabrice.desclaux@cea.fr>
Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp>
Fernando Luis Vázquez Cao <fernando@oss.ntt.co.jp>
Gautham R. Shenoy <ego@in.ibm.com>
Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Gonglei (Arei) <arei.gonglei@huawei.com>
Guang Wang <wang.guang55@zte.com.cn>
Hailiang Zhang <zhang.zhanghailiang@huawei.com>
Hervé Poussineau <hpoussin@reactos.org>
Jakub Jermář <jakub@jermar.eu>
Jakub Jermář <jakub.jermar@kernkonzept.com>
Jean-Christophe Dubois <jcd@tribudubois.net>
Jindřich Makovička <makovick@gmail.com>
John Arbuckle <programmingkidx@gmail.com>
Juha Riihimäki <juha.riihimaki@nokia.com>
Juha Riihimäki <Juha.Riihimaki@nokia.com>
Jun Li <junmuzi@gmail.com>
Laurent Vivier <Laurent@lvivier.info>
Leandro Lupori <leandro.lupori@gmail.com>
Li Guang <lig.fnst@cn.fujitsu.com>
Liming Wang <walimisdev@gmail.com>
linzhecheng <linzc@zju.edu.cn>
Liran Schour <lirans@il.ibm.com>
Liu Yu <yu.liu@freescale.com>
Liu Yu <Yu.Liu@freescale.com>
Li Zhang <zhlcindy@gmail.com>
Li Zhang <zhlcindy@linux.vnet.ibm.com>
Lluís Vilanova <vilanova@ac.upc.edu>
Lluís Vilanova <xscript@gmx.net>
Longpeng (Mike) <longpeng2@huawei.com>
Luc Michel <luc.michel@git.antfield.fr>
Luc Michel <luc.michel@greensocs.com>
Marc Marí <marc.mari.barcelo@gmail.com>
Marc Marí <markmb@redhat.com>
Michael Avdienko <whitearchey@gmail.com>
Michael S. Tsirkin <mst@redhat.com>
Munkyu Im <munkyu.im@samsung.com>
Nicholas Bellinger <nab@linux-iscsi.org>
Nicholas Thomas <nick@bytemark.co.uk>
Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Orit Wasserman <owasserm@redhat.com>
Paolo Bonzini <pbonzini@redhat.com>
Pavel Dovgaluk <dovgaluk@ispras.ru>
Pavel Dovgaluk <pavel.dovgaluk@gmail.com>
Pavel Dovgaluk <Pavel.Dovgaluk@ispras.ru>
Peter Crosthwaite <crosthwaite.peter@gmail.com>
Peter Crosthwaite <peter.crosthwaite@petalogix.com>
Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Prasad J Pandit <pjp@fedoraproject.org>
Prasad J Pandit <ppandit@redhat.com>
Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Remy Noel <remy.noel@blade-group.com>
Roger Pau Monné <roger.pau@citrix.com>
Shin'ichiro Kawasaki <kawasaki@juno.dti.ne.jp>
Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Sochin Jiang <sochin.jiang@huawei.com>
Takashi Yoshii <takasi-y@ops.dti.ne.jp>
Thomas Huth <thuth@redhat.com>
Thomas Knych <thomaswk@google.com>
Timothy Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Tony Nguyen <tony.nguyen@bt.com>
Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Vibi Sreenivasan <vibi_sreenivasan@cms.com>
Vijaya Kumar K <vijayak@cavium.com>
Vijaya Kumar K <Vijaya.Kumar@cavium.com>
Vijay Kumar <vijaykumar@bravegnu.org>
Vijay Kumar <vijaykumar@zilogic.com>
Wang Guang <wang.guang55@zte.com.cn>
Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Wenshuang Ma <kevinnma@tencent.com>
Xiaoqiang Zhao <zxq_yx_007@163.com>
Xinhua Cao <caoxinhua@huawei.com>
Xiong Zhang <xiong.y.zhang@intel.com>
Yin Yin <yin.yin@cs2c.com.cn>
Yu-Chen Lin <npes87184@gmail.com>
Yu-Chen Lin <npes87184@gmail.com> <yuchenlin@synology.com>
YunQiang Su <syq@debian.org>
YunQiang Su <ysu@wavecomp.com>
Yuri Pudgorodskiy <yur@virtuozzo.com>
Zhengui Li <lizhengui@huawei.com>
Zhenwei Pi <pizhenwei@bytedance.com>
Zhenwei Pi <zhenwei.pi@youruncloud.com>
Zhuang Yanying <ann.zhuangyanying@huawei.com>
-302
View File
@@ -1,302 +0,0 @@
---
# Note: this file is still unused. It serves as a documentation for the
# Patchew configuration in case patchew.org disappears or has to be
# reinstalled.
#
# Patchew configuration is available to project administrators at
# https://patchew.org/api/v1/projects/1/config/ and can be configured
# to YAML using the following Python script:
#
# import json
# import sys
# import ruamel.yaml
#
# json_str = sys.stdin.read()
# yaml = ruamel.yaml.YAML()
# yaml.explicit_start = True
# data = json.loads(json_str, object_pairs_hook=ruamel.yaml.comments.CommentedMap)
# ruamel.yaml.scalarstring.walk_tree(data)
# yaml.dump(data, sys.stdout)
email:
notifications:
timeouts:
event: TestingReport
enabled: true
to_user: false
reply_subject: true
set_reply_to: true
in_reply_to: true
reply_to_all: false
subject_template: none
to: fam@euphon.net
cc: ''
body_template: |
{% if not is_timeout %} {{ cancel }} {% endif %}
Test '{{ test }}' timeout, log:
{{ log }}
ENOSPC:
event: TestingReport
enabled: true
to_user: false
reply_subject: false
set_reply_to: false
in_reply_to: true
reply_to_all: false
subject_template: Out of space error
to: fam@euphon.net
cc: ''
body_template: |
{% if passed %}
{{ cancel }}
{% endif %}
{% if 'No space left on device' in log %}
Tester {{ tester }} out of space when running {{ test }}
{{ log }}
{% else %}
{{ cancel }}
{% endif %}
FailureShort:
event: TestingReport
enabled: true
to_user: false
reply_subject: true
set_reply_to: true
in_reply_to: true
reply_to_all: true
subject_template: Testing failed
to: ''
cc: ''
body_template: |
{% if passed or not obj.message_id or is_timeout %}
{{ cancel }}
{% endif %}
{% if 'No space left on device' in log %}
{{ cancel }}
{% endif %}
Patchew URL: https://patchew.org/QEMU/{{ obj.message_id }}/
{% ansi2text log as logtext %}
{% if test == "checkpatch" %}
Hi,
This series seems to have some coding style problems. See output below for
more information:
{{ logtext }}
{% elif test == "docker-mingw@fedora" or test == "docker-quick@centos7" or test == "asan" %}
Hi,
This series failed the {{ test }} build test. Please find the testing commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.
{% lines_between logtext start="^=== TEST SCRIPT BEGIN ===$" stop="^=== TEST SCRIPT END ===$" %}
{% lines_between logtext start="^=== OUTPUT BEGIN ===$" stop="=== OUTPUT END ===$" as output %}
{% grep_C output regex="\b(FAIL|XPASS|ERROR|WARN|error:|warning:)" n=3 %}
{% elif test == "s390x" or test == "FreeBSD" or test == "ppcle" or test == "ppcbe" %}
Hi,
This series failed build test on {{test}} host. Please find the details below.
{% lines_between logtext start="^=== TEST SCRIPT BEGIN ===$" stop="^=== TEST SCRIPT END ===$" %}
{% lines_between logtext start="^=== OUTPUT BEGIN ===$" stop="=== OUTPUT END ===$" as output %}
{% grep_C output regex="\b(FAIL|XPASS|ERROR|WARN|error:|warning:)" n=3 %}
{% else %}
{{ cancel }}
{% endif %}
The full log is available at
{{ log_url }}.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to patchew-devel@redhat.com
testing:
tests:
asan:
enabled: true
requirements: docker
timeout: 3600
script: |
#!/bin/bash
time make docker-test-debug@fedora TARGET_LIST=x86_64-softmmu J=14 NETWORK=1
docker-quick@centos7:
enabled: false
requirements: docker,x86_64
timeout: 3600
script: |
#!/bin/bash
time make docker-test-quick@centos7 SHOW_ENV=1 J=14 NETWORK=1
checkpatch:
enabled: true
requirements: ''
timeout: 600
script: |
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
./scripts/checkpatch.pl --mailback base..
docker-mingw@fedora:
enabled: true
requirements: docker,x86_64
timeout: 3600
script: |
#! /bin/bash
test "$(uname -m)" = "x86_64"
ppcle:
enabled: false
requirements: ppcle
timeout: 3600
script: |
#!/bin/bash
# Testing script will be invoked under the git checkout with
# HEAD pointing to a commit that has the patches applied on top of "base"
# branch
set -e
CC=$HOME/bin/cc
INSTALL=$PWD/install
BUILD=$PWD/build
mkdir -p $BUILD $INSTALL
SRC=$PWD
cd $BUILD
$SRC/configure --cc=$CC --prefix=$INSTALL
make -j4
# XXX: we need reliable clean up
# make check -j4 V=1
make install
echo
echo "=== ENV ==="
env
echo
echo "=== PACKAGES ==="
rpm -qa
ppcbe:
enabled: false
requirements: ppcbe
timeout: 3600
script: |
#!/bin/bash
# Testing script will be invoked under the git checkout with
# HEAD pointing to a commit that has the patches applied on top of "base"
# branch
set -e
CC=$HOME/bin/cc
INSTALL=$PWD/install
BUILD=$PWD/build
mkdir -p $BUILD $INSTALL
SRC=$PWD
cd $BUILD
$SRC/configure --cc=$CC --prefix=$INSTALL
make -j4
# XXX: we need reliable clean up
# make check -j4 V=1
make install
echo
echo "=== ENV ==="
env
echo
echo "=== PACKAGES ==="
rpm -qa
FreeBSD:
enabled: true
requirements: qemu-x86,x86_64,git
timeout: 3600
script: |
#!/bin/bash
# Testing script will be invoked under the git checkout with
# HEAD pointing to a commit that has the patches applied on top of "base"
# branch
if qemu-system-x86_64 --help >/dev/null 2>&1; then
QEMU=qemu-system-x86_64
elif /usr/libexec/qemu-kvm --help >/dev/null 2>&1; then
QEMU=/usr/libexec/qemu-kvm
else
exit 1
fi
make vm-build-freebsd J=21 QEMU=$QEMU
exit 0
docker-clang@ubuntu:
enabled: true
requirements: docker,x86_64
timeout: 3600
script: |
#!/bin/bash
time make docker-test-clang@ubuntu SHOW_ENV=1 J=14 NETWORK=1
s390x:
enabled: true
requirements: s390x
timeout: 3600
script: |
#!/bin/bash
# Testing script will be invoked under the git checkout with
# HEAD pointing to a commit that has the patches applied on top of "base"
# branch
set -e
CC=$HOME/bin/cc
INSTALL=$PWD/install
BUILD=$PWD/build
mkdir -p $BUILD $INSTALL
SRC=$PWD
cd $BUILD
$SRC/configure --cc=$CC --prefix=$INSTALL
make -j4
# XXX: we need reliable clean up
# make check -j4 V=1
make install
echo
echo "=== ENV ==="
env
echo
echo "=== PACKAGES ==="
rpm -qa
requirements:
x86_64:
script: |
#! /bin/bash
test "$(uname -m)" = "x86_64"
qemu-x86:
script: |
#!/bin/bash
if qemu-system-x86_64 --help >/dev/null 2>&1; then
:
elif /usr/libexec/qemu-kvm --help >/dev/null 2>&1; then
:
else
exit 1
fi
ppcle:
script: |
#!/bin/bash
test "$(uname -m)" = "ppc64le"
ppcbe:
script: |
#!/bin/bash
test "$(uname -m)" = "ppc64"
git:
script: |
#! /bin/bash
git config user.name > /dev/null 2>&1
docker:
script: |
#!/bin/bash
docker ps || sudo -n docker ps
s390x:
script: |
#!/bin/bash
test "$(uname -m)" = "s390x"
git:
push_to: git@github.com:patchew-project/qemu
public_repo: https://github.com/patchew-project/qemu
url_template: https://github.com/patchew-project/qemu/tree/%t
-20
View File
@@ -1,20 +0,0 @@
# .readthedocs.yml
# Read the Docs configuration file
# See https://docs.readthedocs.io/en/stable/config-file/v2.html for details
# Required
version: 2
# Build documentation in the docs/ directory with Sphinx
sphinx:
configuration: docs/conf.py
# We want all the document formats
formats: all
# For consistency, we require that QEMU's Sphinx extensions
# run with at least the same minimum version of Python that
# we require for other Python in our codebase (our conf.py
# enforces this, and some code needs it.)
python:
version: 3.5
+9 -3
View File
@@ -35,7 +35,13 @@ build:
options: "-e HOME=/root"
ci:
- unset CC
- mkdir build
- cd build
- ../configure --disable-docs ${QEMU_CONFIGURE_OPTS} --target-list=${TARGET_LIST}
# some targets require newer up to date packages, for example TARGET_LIST matching
# aarch64*-softmmu|arm*-softmmu|ppc*-softmmu|microblaze*-softmmu|mips64el-softmmu)
# see the configure script:
# error_exit "DTC (libfdt) version >= 1.4.2 not present. Your options:"
# " (1) Preferred: Install the DTC (libfdt) devel package"
# " (2) Fetch the DTC submodule, using:"
# " git submodule update --init dtc"
- dpkg --compare-versions `dpkg-query --showformat='${Version}' --show libfdt-dev` ge 1.4.2 || git submodule update --init dtc
- ./configure ${QEMU_CONFIGURE_OPTS} --target-list=${TARGET_LIST}
- make -j$(($(getconf _NPROCESSORS_ONLN) + 1))
+116 -503
View File
@@ -1,25 +1,10 @@
# The current Travis default is a VM based 16.04 Xenial on GCE
# Additional builds with specific requirements for a full VM need to
# be added as additional matrix: entries later on
os: linux
dist: xenial
sudo: false
language: c
python:
- "2.6"
compiler:
- gcc
cache:
# There is one cache per branch and compiler version.
# characteristics of each job are used to identify the cache:
# - OS name (currently, linux, osx, or windows)
# - OS distribution (for Linux, xenial, trusty, or precise)
# - macOS image name (e.g., xcode7.2)
# - Names and values of visible environment variables set in .travis.yml or Settings panel
timeout: 1200
ccache: true
pip: true
directories:
- $HOME/avocado/data/cache
cache: ccache
addons:
apt:
packages:
@@ -29,7 +14,7 @@ addons:
- libbrlapi-dev
- libcap-ng-dev
- libgcc-4.8-dev
- libgnutls28-dev
- libgnutls-dev
- libgtk-3-dev
- libiscsi-dev
- liblttng-ust-dev
@@ -37,25 +22,18 @@ addons:
- libnfs-dev
- libnss3-dev
- libpixman-1-dev
- libpng-dev
- libpng12-dev
- librados-dev
- libsdl2-dev
- libsdl2-image-dev
- libsdl1.2-dev
- libseccomp-dev
- libspice-protocol-dev
- libspice-server-dev
- libssh-dev
- libssh2-1-dev
- liburcu-dev
- libusb-1.0-0-dev
- libvdeplug-dev
- libvte-2.91-dev
- libzstd-dev
- libvte-2.90-dev
- sparse
- uuid-dev
- gcovr
# Tests dependencies
- genisoimage
# The channel name "irc.oftc.net#qemu" is encrypted against qemu/qemu
# to prevent IRC notifications from forks. This was created using:
@@ -66,287 +44,131 @@ notifications:
- secure: "F7GDRgjuOo5IUyRLqSkmDL7kvdU4UcH3Lm/W2db2JnDHTGCqgEdaYEYKciyCLZ57vOTsTsOgesN8iUT7hNHBd1KWKjZe9KDTZWppWRYVwAwQMzVeSOsbbU4tRoJ6Pp+3qhH1Z0eGYR9ZgKYAoTumDFgSAYRp4IscKS8jkoedOqM="
on_success: change
on_failure: always
env:
global:
- SRC_DIR=".."
- BUILD_DIR="build"
- BASE_CONFIG="--disable-docs --disable-tools"
- TEST_BUILD_CMD=""
- TEST_CMD="make check V=1"
# This is broadly a list of "mainline" softmmu targets which have support across the major distros
- MAIN_SOFTMMU_TARGETS="aarch64-softmmu,mips64-softmmu,ppc64-softmmu,riscv64-softmmu,s390x-softmmu,x86_64-softmmu"
- CCACHE_SLOPPINESS="include_file_ctime,include_file_mtime"
- CCACHE_MAXSIZE=1G
- G_MESSAGES_DEBUG=error
- TEST_CMD="make check"
- MAKEFLAGS="-j3"
matrix:
- CONFIG="--disable-system"
- CONFIG="--disable-user"
- CONFIG="--enable-debug --enable-debug-tcg"
- CONFIG="--disable-linux-aio --disable-cap-ng --disable-attr --disable-brlapi --disable-uuid --disable-libusb --disable-user"
- CONFIG="--enable-modules --disable-linux-user"
- CONFIG="--with-coroutine=ucontext --disable-linux-user"
- CONFIG="--with-coroutine=sigaltstack --disable-linux-user"
git:
# we want to do this ourselves
submodules: false
# Common first phase for all steps
before_install:
- if command -v ccache ; then ccache --zero-stats ; fi
- export JOBS=$(($(getconf _NPROCESSORS_ONLN) + 1))
- echo "=== Using ${JOBS} simultaneous jobs ==="
# Configure step - may be overridden
- if [ "$TRAVIS_OS_NAME" == "osx" ]; then brew update ; fi
- if [ "$TRAVIS_OS_NAME" == "osx" ]; then brew install libffi gettext glib pixman ; fi
- wget -O - http://people.linaro.org/~alex.bennee/qemu-submodule-git-seed.tar.xz | tar -xvJ
- git submodule update --init --recursive
before_script:
- mkdir -p ${BUILD_DIR} && cd ${BUILD_DIR}
- ${SRC_DIR}/configure ${BASE_CONFIG} ${CONFIG} || { cat config.log && exit 1; }
# Main build & test - rarely overridden - controlled by TEST_CMD
- ./configure ${CONFIG}
script:
- BUILD_RC=0 && make -j${JOBS} || BUILD_RC=$?
- |
if [ "$BUILD_RC" -eq 0 ] && [ -n "$TEST_BUILD_CMD" ]; then
${TEST_BUILD_CMD} || BUILD_RC=$?
else
$(exit $BUILD_RC);
fi
- |
if [ "$BUILD_RC" -eq 0 ] ; then
${TEST_CMD} ;
else
$(exit $BUILD_RC);
fi
after_script:
- if command -v ccache ; then ccache --show-stats ; fi
jobs:
- make ${MAKEFLAGS} && ${TEST_CMD}
matrix:
include:
- name: "GCC static (user)"
env:
- CONFIG="--disable-system --static"
- CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default"
# we split the system builds as it takes a while to build them all
- name: "GCC (main-softmmu)"
env:
- CONFIG="--disable-user --target-list=${MAIN_SOFTMMU_TARGETS}"
- CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default"
- name: "GCC (other-softmmu)"
env:
- CONFIG="--disable-user --target-list-exclude=${MAIN_SOFTMMU_TARGETS}"
- CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default"
# Just build tools and run minimal unit and softfloat checks
- name: "GCC check-softfloat (user)"
env:
- BASE_CONFIG="--enable-tools"
- CONFIG="--disable-user --disable-system"
- TEST_CMD="make check-unit check-softfloat -j${JOBS}"
- CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default"
# --enable-debug implies --enable-debug-tcg, also runs quite a bit slower
- name: "GCC debug (main-softmmu)"
env:
- CONFIG="--enable-debug --target-list=${MAIN_SOFTMMU_TARGETS}"
- CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-debug"
# TCG debug can be run just on its own and is mostly agnostic to user/softmmu distinctions
- name: "GCC debug (user)"
env:
- CONFIG="--enable-debug-tcg --disable-system"
- CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-debug-tcg"
- name: "GCC some libs disabled (main-softmmu)"
env:
- CONFIG="--disable-linux-aio --disable-cap-ng --disable-attr --disable-brlapi --disable-libusb --disable-replication --target-list=${MAIN_SOFTMMU_TARGETS}"
# Module builds are mostly of interest to major distros
- name: "GCC modules (main-softmmu)"
env:
- CONFIG="--enable-modules --target-list=${MAIN_SOFTMMU_TARGETS}"
- CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default"
# Alternate coroutines implementations are only really of interest to KVM users
# However we can't test against KVM on Travis so we can only run unit tests
- name: "check-unit coroutine=ucontext"
env:
- CONFIG="--with-coroutine=ucontext --disable-tcg"
- TEST_CMD="make check-unit -j${JOBS} V=1"
- name: "check-unit coroutine=sigaltstack"
env:
- CONFIG="--with-coroutine=sigaltstack --disable-tcg"
- TEST_CMD="make check-unit -j${JOBS} V=1"
# Check we can build docs and tools (out of tree)
- name: "tools and docs (bionic)"
dist: bionic
env:
- BUILD_DIR="out-of-tree/build/dir" SRC_DIR="../../.."
- BASE_CONFIG="--enable-tools --enable-docs"
- CONFIG="--target-list=x86_64-softmmu,aarch64-linux-user"
- CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default"
addons:
apt:
packages:
- python3-sphinx
- texinfo
- perl
# Test with Clang for compile portability (Travis uses clang-5.0)
- name: "Clang (user)"
env:
- CONFIG="--disable-system"
- CACHE_NAME="${TRAVIS_BRANCH}-linux-clang-default"
# Test with CLang for compile portability
- env: CONFIG=""
compiler: clang
- name: "Clang (main-softmmu)"
env:
- CONFIG="--target-list=${MAIN_SOFTMMU_TARGETS} "
- CACHE_NAME="${TRAVIS_BRANCH}-linux-clang-sanitize"
compiler: clang
before_script:
- mkdir -p ${BUILD_DIR} && cd ${BUILD_DIR}
- ${SRC_DIR}/configure ${CONFIG} --extra-cflags="-fsanitize=undefined -Werror" || { cat config.log && exit 1; }
- name: "Clang (other-softmmu)"
env:
- CONFIG="--disable-user --target-list-exclude=${MAIN_SOFTMMU_TARGETS}"
- CACHE_NAME="${TRAVIS_BRANCH}-linux-clang-default"
compiler: clang
# gprof/gcov are GCC features
- name: "GCC gprof/gcov"
env:
- CONFIG="--enable-gprof --enable-gcov --disable-pie --target-list=${MAIN_SOFTMMU_TARGETS}"
after_success:
- ${SRC_DIR}/scripts/travis/coverage-summary.sh
- env: CONFIG="--enable-gprof --enable-gcov --disable-pie"
compiler: gcc
# We manually include builds which we disable "make check" for
- name: "GCC without-default-devices (softmmu)"
env:
- CONFIG="--without-default-devices --disable-user"
- CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default"
- TEST_CMD=""
# Check the TCG interpreter (TCI)
- name: "GCC TCI"
env:
- CONFIG="--enable-debug-tcg --enable-tcg-interpreter --disable-kvm --disable-containers
--target-list=alpha-softmmu,arm-softmmu,hppa-softmmu,m68k-softmmu,microblaze-softmmu,moxie-softmmu,ppc-softmmu,s390x-softmmu,x86_64-softmmu"
- TEST_CMD="make check-qtest check-tcg V=1"
# We don't need to exercise every backend with every front-end
- name: "GCC trace log,simple,syslog (user)"
env:
- CONFIG="--enable-trace-backends=log,simple,syslog --disable-system"
- TEST_CMD=""
- name: "GCC trace ftrace (x86_64-softmmu)"
env:
- CONFIG="--enable-trace-backends=ftrace --target-list=x86_64-softmmu"
- TEST_CMD=""
- name: "GCC trace ust (x86_64-softmmu)"
env:
- CONFIG="--enable-trace-backends=ust --target-list=x86_64-softmmu"
- TEST_CMD=""
# MacOSX builds - cirrus.yml also tests some MacOS builds including latest Xcode
- name: "OSX Xcode 10.3"
env:
- BASE_CONFIG="--disable-docs --enable-tools"
- CONFIG="--target-list=i386-softmmu,ppc-softmmu,ppc64-softmmu,m68k-softmmu,x86_64-softmmu"
- env: CONFIG="--enable-debug --enable-tcg-interpreter"
TEST_CMD=""
compiler: gcc
- env: CONFIG="--enable-trace-backends=simple"
TEST_CMD=""
compiler: gcc
- env: CONFIG="--enable-trace-backends=ftrace"
TEST_CMD=""
compiler: gcc
- env: CONFIG="--enable-trace-backends=ust"
TEST_CMD=""
compiler: gcc
- env: CONFIG="--disable-tcg"
TEST_CMD=""
compiler: gcc
- env: CONFIG=""
os: osx
osx_image: xcode10.3
compiler: clang
# Plain Trusty System Build
- env: CONFIG="--disable-linux-user"
sudo: required
addons:
homebrew:
packages:
- ccache
- glib
- pixman
- gnu-sed
- python
update: true
dist: trusty
compiler: gcc
before_install:
- sudo apt-get update -qq
- sudo apt-get build-dep -qq qemu
- wget -O - http://people.linaro.org/~alex.bennee/qemu-submodule-git-seed.tar.xz | tar -xvJ
- git submodule update --init --recursive
# Plain Trusty Linux User Build
- env: CONFIG="--disable-system"
sudo: required
addons:
dist: trusty
compiler: gcc
before_install:
- sudo apt-get update -qq
- sudo apt-get build-dep -qq qemu
- wget -O - http://people.linaro.org/~alex.bennee/qemu-submodule-git-seed.tar.xz | tar -xvJ
- git submodule update --init --recursive
# Trusty System build with latest stable clang & python 3.0
- sudo: required
addons:
dist: trusty
language: generic
compiler: none
python:
- "3.0"
env:
- COMPILER_NAME=clang CXX=clang++-3.9 CC=clang-3.9
- CONFIG="--disable-linux-user --cc=clang-3.9 --cxx=clang++-3.9 --python=/usr/bin/python3"
before_install:
- wget -nv -O - http://llvm.org/apt/llvm-snapshot.gpg.key | sudo apt-key add -
- sudo apt-add-repository -y 'deb http://llvm.org/apt/trusty llvm-toolchain-trusty-3.9 main'
- sudo apt-get update -qq
- sudo apt-get install -qq -y clang-3.9
- sudo apt-get build-dep -qq qemu
- wget -O - http://people.linaro.org/~alex.bennee/qemu-submodule-git-seed.tar.xz | tar -xvJ
- git submodule update --init --recursive
before_script:
- brew link --overwrite python
- export PATH="/usr/local/opt/ccache/libexec:$PATH"
- mkdir -p ${BUILD_DIR} && cd ${BUILD_DIR}
- ${SRC_DIR}/configure ${BASE_CONFIG} ${CONFIG} || { cat config.log && exit 1; }
# Python builds
- name: "GCC Python 3.5 (x86_64-softmmu)"
env:
- CONFIG="--target-list=x86_64-softmmu"
- CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default"
language: python
python: 3.5
- name: "GCC Python 3.6 (x86_64-softmmu)"
env:
- CONFIG="--target-list=x86_64-softmmu"
- CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default"
language: python
python: 3.6
# Acceptance (Functional) tests
- name: "GCC check-acceptance"
dist: bionic
env:
- CONFIG="--enable-tools --target-list=aarch64-softmmu,alpha-softmmu,arm-softmmu,m68k-softmmu,microblaze-softmmu,mips-softmmu,mips64el-softmmu,nios2-softmmu,or1k-softmmu,ppc-softmmu,ppc64-softmmu,s390x-softmmu,sparc-softmmu,x86_64-softmmu,xtensa-softmmu"
- TEST_CMD="make check-acceptance"
- CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-acceptance"
after_script:
- python3 -c 'import json; r = json.load(open("tests/results/latest/results.json")); [print(t["logfile"]) for t in r["tests"] if t["status"] not in ("PASS", "SKIP")]' | xargs cat
- du -chs $HOME/avocado/data/cache
- ./configure ${CONFIG} || cat config.log
# Trusty Linux User build with latest stable clang & python 3.6
- sudo: required
addons:
apt:
packages:
- python3-pil
- python3-pip
- python3-numpy
- python3-opencv
- python3-venv
- rpm2cpio
- tesseract-ocr
- tesseract-ocr-eng
dist: trusty
language: generic
compiler: none
python:
- "3.6"
env:
- COMPILER_NAME=clang CXX=clang++-3.9 CC=clang-3.9
- CONFIG="--disable-system --cc=clang-3.9 --cxx=clang++-3.9 --python=/usr/bin/python3"
before_install:
- wget -nv -O - http://llvm.org/apt/llvm-snapshot.gpg.key | sudo apt-key add -
- sudo apt-add-repository -y 'deb http://llvm.org/apt/trusty llvm-toolchain-trusty-3.9 main'
- sudo apt-get update -qq
- sudo apt-get install -qq -y clang-3.9
- sudo apt-get build-dep -qq qemu
- wget -O - http://people.linaro.org/~alex.bennee/qemu-submodule-git-seed.tar.xz | tar -xvJ
- git submodule update --init --recursive
before_script:
- ./configure ${CONFIG} || cat config.log
# Using newer GCC with sanitizers
- name: "GCC9 with sanitizers (softmmu)"
addons:
- addons:
apt:
update: true
sources:
# PPAs for newer toolchains
- ubuntu-toolchain-r-test
packages:
# Extra toolchains
- gcc-9
- g++-9
- gcc-5
- g++-5
# Build dependencies
- libaio-dev
- libattr1-dev
@@ -362,230 +184,21 @@ jobs:
- libpixman-1-dev
- libpng12-dev
- librados-dev
- libsdl2-dev
- libsdl2-image-dev
- libsdl1.2-dev
- libseccomp-dev
- libspice-protocol-dev
- libspice-server-dev
- libssh-dev
- libssh2-1-dev
- liburcu-dev
- libusb-1.0-0-dev
- libvte-2.91-dev
- libvte-2.90-dev
- sparse
- uuid-dev
language: generic
compiler: none
env:
- COMPILER_NAME=gcc CXX=g++-9 CC=gcc-9
- CONFIG="--cc=gcc-9 --cxx=g++-9 --disable-pie --disable-linux-user"
- COMPILER_NAME=gcc CXX=g++-5 CC=gcc-5
- CONFIG="--cc=gcc-5 --cxx=g++-5 --disable-pie --disable-linux-user"
- TEST_CMD=""
before_script:
- mkdir -p ${BUILD_DIR} && cd ${BUILD_DIR}
- ${SRC_DIR}/configure ${CONFIG} --extra-cflags="-g3 -O0 -Wno-error=stringop-truncation -fsanitize=thread" --extra-ldflags="-fuse-ld=gold" || { cat config.log && exit 1; }
# Run check-tcg against linux-user
- name: "GCC check-tcg (user)"
env:
- CONFIG="--disable-system --enable-debug-tcg"
- TEST_BUILD_CMD="make build-tcg"
- TEST_CMD="make check-tcg"
- CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-debug-tcg"
# Run check-tcg against linux-user (with plugins)
# we skip sparc64-linux-user until it has been fixed somewhat
# we skip cris-linux-user as it doesn't use the common run loop
- name: "GCC plugins check-tcg (user)"
env:
- CONFIG="--disable-system --enable-plugins --enable-debug-tcg --target-list-exclude=sparc64-linux-user,cris-linux-user"
- TEST_BUILD_CMD="make build-tcg"
- TEST_CMD="make check-tcg"
- CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-debug-tcg"
# Run check-tcg against softmmu targets
- name: "GCC check-tcg (some-softmmu)"
env:
- CONFIG="--enable-debug-tcg --target-list=xtensa-softmmu,arm-softmmu,aarch64-softmmu,alpha-softmmu"
- TEST_BUILD_CMD="make build-tcg"
- TEST_CMD="make check-tcg"
- CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-debug-tcg"
# Run check-tcg against softmmu targets (with plugins)
- name: "GCC plugins check-tcg (some-softmmu)"
env:
- CONFIG="--enable-plugins --enable-debug-tcg --target-list=xtensa-softmmu,arm-softmmu,aarch64-softmmu,alpha-softmmu"
- TEST_BUILD_CMD="make build-tcg"
- TEST_CMD="make check-tcg"
- CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-debug-tcg"
- name: "[aarch64] GCC check-tcg"
arch: arm64
dist: xenial
addons:
apt_packages:
- libaio-dev
- libattr1-dev
- libbrlapi-dev
- libcap-ng-dev
- libgcrypt20-dev
- libgnutls28-dev
- libgtk-3-dev
- libiscsi-dev
- liblttng-ust-dev
- libncurses5-dev
- libnfs-dev
- libnss3-dev
- libpixman-1-dev
- libpng-dev
- librados-dev
- libsdl2-dev
- libseccomp-dev
- liburcu-dev
- libusb-1.0-0-dev
- libvdeplug-dev
- libvte-2.91-dev
# Tests dependencies
- genisoimage
env:
- TEST_CMD="make check check-tcg V=1"
- CONFIG="--disable-containers --target-list=${MAIN_SOFTMMU_TARGETS}"
- name: "[ppc64] GCC check-tcg"
arch: ppc64le
dist: xenial
addons:
apt_packages:
- libaio-dev
- libattr1-dev
- libbrlapi-dev
- libcap-ng-dev
- libgcrypt20-dev
- libgnutls28-dev
- libgtk-3-dev
- libiscsi-dev
- liblttng-ust-dev
- libncurses5-dev
- libnfs-dev
- libnss3-dev
- libpixman-1-dev
- libpng-dev
- librados-dev
- libsdl2-dev
- libseccomp-dev
- liburcu-dev
- libusb-1.0-0-dev
- libvdeplug-dev
- libvte-2.91-dev
# Tests dependencies
- genisoimage
env:
- TEST_CMD="make check check-tcg V=1"
- CONFIG="--disable-containers --target-list=${MAIN_SOFTMMU_TARGETS},ppc64le-linux-user"
- name: "[s390x] GCC check-tcg"
arch: s390x
dist: bionic
addons:
apt_packages:
- libaio-dev
- libattr1-dev
- libbrlapi-dev
- libcap-ng-dev
- libgcrypt20-dev
- libgnutls28-dev
- libgtk-3-dev
- libiscsi-dev
- liblttng-ust-dev
- libncurses5-dev
- libnfs-dev
- libnss3-dev
- libpixman-1-dev
- libpng-dev
- librados-dev
- libsdl2-dev
- libseccomp-dev
- liburcu-dev
- libusb-1.0-0-dev
- libvdeplug-dev
- libvte-2.91-dev
# Tests dependencies
- genisoimage
env:
- TEST_CMD="make check check-tcg V=1"
- CONFIG="--disable-containers --target-list=${MAIN_SOFTMMU_TARGETS},s390x-linux-user"
script:
- ( cd ${SRC_DIR} ; git submodule update --init roms/SLOF )
- BUILD_RC=0 && make -j${JOBS} || BUILD_RC=$?
- |
if [ "$BUILD_RC" -eq 0 ] ; then
mv pc-bios/s390-ccw/*.img pc-bios/ ;
${TEST_CMD} ;
else
$(exit $BUILD_RC);
fi
- name: "[s390x] GCC check (KVM)"
arch: s390x
dist: bionic
addons:
apt_packages:
- libaio-dev
- libattr1-dev
- libbrlapi-dev
- libcap-ng-dev
- libgcrypt20-dev
- libgnutls28-dev
- libgtk-3-dev
- libiscsi-dev
- liblttng-ust-dev
- libncurses5-dev
- libnfs-dev
- libnss3-dev
- libpixman-1-dev
- libpng-dev
- librados-dev
- libsdl2-dev
- libseccomp-dev
- liburcu-dev
- libusb-1.0-0-dev
- libvdeplug-dev
- libvte-2.91-dev
# Tests dependencies
- genisoimage
env:
- TEST_CMD="make check-unit"
- CONFIG="--disable-containers --disable-tcg --enable-kvm --disable-tools"
script:
- ( cd ${SRC_DIR} ; git submodule update --init roms/SLOF )
- BUILD_RC=0 && make -j${JOBS} || BUILD_RC=$?
- |
if [ "$BUILD_RC" -eq 0 ] ; then
mv pc-bios/s390-ccw/*.img pc-bios/ ;
${TEST_CMD} ;
else
$(exit $BUILD_RC);
fi
# Release builds
# The make-release script expect a QEMU version, so our tag must start with a 'v'.
# This is the case when release candidate tags are created.
- name: "Release tarball"
if: tag IS present AND tag =~ /^v\d+\.\d+(\.\d+)?(-\S*)?$/
env:
# We want to build from the release tarball
- BUILD_DIR="release/build/dir" SRC_DIR="../../.."
- BASE_CONFIG="--prefix=$PWD/dist"
- CONFIG="--target-list=x86_64-softmmu,aarch64-softmmu,armeb-linux-user,ppc-linux-user"
- TEST_CMD="make install -j${JOBS}"
- QEMU_VERSION="${TRAVIS_TAG:1}"
- CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default"
script:
- make -C ${SRC_DIR} qemu-${QEMU_VERSION}.tar.bz2
- ls -l ${SRC_DIR}/qemu-${QEMU_VERSION}.tar.bz2
- tar -xf ${SRC_DIR}/qemu-${QEMU_VERSION}.tar.bz2 && cd qemu-${QEMU_VERSION}
- mkdir -p release-build && cd release-build
- ../configure ${BASE_CONFIG} ${CONFIG} || { cat config.log && exit 1; }
- make install
- ./configure ${CONFIG} --extra-cflags="-g3 -O0 -fsanitize=thread -fuse-ld=gold" || cat config.log
+160
View File
@@ -0,0 +1,160 @@
QEMU Coding Style
=================
Please use the script checkpatch.pl in the scripts directory to check
patches before submitting.
1. Whitespace
Of course, the most important aspect in any coding style is whitespace.
Crusty old coders who have trouble spotting the glasses on their noses
can tell the difference between a tab and eight spaces from a distance
of approximately fifteen parsecs. Many a flamewar has been fought and
lost on this issue.
QEMU indents are four spaces. Tabs are never used, except in Makefiles
where they have been irreversibly coded into the syntax.
Spaces of course are superior to tabs because:
- You have just one way to specify whitespace, not two. Ambiguity breeds
mistakes.
- The confusion surrounding 'use tabs to indent, spaces to justify' is gone.
- Tab indents push your code to the right, making your screen seriously
unbalanced.
- Tabs will be rendered incorrectly on editors who are misconfigured not
to use tab stops of eight positions.
- Tabs are rendered badly in patches, causing off-by-one errors in almost
every line.
- It is the QEMU coding style.
Do not leave whitespace dangling off the ends of lines.
2. Line width
Lines should be 80 characters; try not to make them longer.
Sometimes it is hard to do, especially when dealing with QEMU subsystems
that use long function or symbol names. Even in that case, do not make
lines much longer than 80 characters.
Rationale:
- Some people like to tile their 24" screens with a 6x4 matrix of 80x24
xterms and use vi in all of them. The best way to punish them is to
let them keep doing it.
- Code and especially patches is much more readable if limited to a sane
line length. Eighty is traditional.
- The four-space indentation makes the most common excuse ("But look
at all that white space on the left!") moot.
- It is the QEMU coding style.
3. Naming
Variables are lower_case_with_underscores; easy to type and read. Structured
type names are in CamelCase; harder to type but standing out. Enum type
names and function type names should also be in CamelCase. Scalar type
names are lower_case_with_underscores_ending_with_a_t, like the POSIX
uint64_t and family. Note that this last convention contradicts POSIX
and is therefore likely to be changed.
When wrapping standard library functions, use the prefix qemu_ to alert
readers that they are seeing a wrapped version; otherwise avoid this prefix.
4. Block structure
Every indented statement is braced; even if the block contains just one
statement. The opening brace is on the line that contains the control
flow statement that introduces the new block; the closing brace is on the
same line as the else keyword, or on a line by itself if there is no else
keyword. Example:
if (a == 5) {
printf("a was 5.\n");
} else if (a == 6) {
printf("a was 6.\n");
} else {
printf("a was something else entirely.\n");
}
Note that 'else if' is considered a single statement; otherwise a long if/
else if/else if/.../else sequence would need an indent for every else
statement.
An exception is the opening brace for a function; for reasons of tradition
and clarity it comes on a line by itself:
void a_function(void)
{
do_something();
}
Rationale: a consistent (except for functions...) bracing style reduces
ambiguity and avoids needless churn when lines are added or removed.
Furthermore, it is the QEMU coding style.
5. Declarations
Mixed declarations (interleaving statements and declarations within
blocks) are generally not allowed; declarations should be at the beginning
of blocks.
Every now and then, an exception is made for declarations inside a
#ifdef or #ifndef block: if the code looks nicer, such declarations can
be placed at the top of the block even if there are statements above.
On the other hand, however, it's often best to move that #ifdef/#ifndef
block to a separate function altogether.
6. Conditional statements
When comparing a variable for (in)equality with a constant, list the
constant on the right, as in:
if (a == 1) {
/* Reads like: "If a equals 1" */
do_something();
}
Rationale: Yoda conditions (as in 'if (1 == a)') are awkward to read.
Besides, good compilers already warn users when '==' is mis-typed as '=',
even when the constant is on the right.
7. Comment style
We use traditional C-style /* */ comments and avoid // comments.
Rationale: The // form is valid in C99, so this is purely a matter of
consistency of style. The checkpatch script will warn you about this.
8. trace-events style
8.1 0x prefix
In trace-events files, use a '0x' prefix to specify hex numbers, as in:
some_trace(unsigned x, uint64_t y) "x 0x%x y 0x" PRIx64
An exception is made for groups of numbers that are hexadecimal by
convention and separated by the symbols '.', '/', ':', or ' ' (such as
PCI bus id):
another_trace(int cssid, int ssid, int dev_num) "bus id: %x.%x.%04x"
However, you can use '0x' for such groups if you want. Anyway, be sure that
it is obvious that numbers are in hex, ex.:
data_dump(uint8_t c1, uint8_t c2, uint8_t c3) "bytes (in hex): %02x %02x %02x"
Rationale: hex numbers are hard to read in logs when there is no 0x prefix,
especially when (occasionally) the representation doesn't contain any letters
and especially in one line with other decimal numbers. Number groups are allowed
to not use '0x' because for some things notations like %x.%x.%x are used not
only in Qemu. Also dumping raw data bytes with '0x' is less readable.
8.2 '#' printf flag
Do not use printf flag '#', like '%#x'.
Rationale: there are two ways to add a '0x' prefix to printed number: '0x%...'
and '%#...'. For consistency the only one way should be used. Arguments for
'0x%' are:
- it is more popular
- '%#' omits the 0x for the value 0 which makes output inconsistent
-641
View File
@@ -1,641 +0,0 @@
=================
QEMU Coding Style
=================
.. contents:: Table of Contents
Please use the script checkpatch.pl in the scripts directory to check
patches before submitting.
Formatting and style
********************
Whitespace
==========
Of course, the most important aspect in any coding style is whitespace.
Crusty old coders who have trouble spotting the glasses on their noses
can tell the difference between a tab and eight spaces from a distance
of approximately fifteen parsecs. Many a flamewar has been fought and
lost on this issue.
QEMU indents are four spaces. Tabs are never used, except in Makefiles
where they have been irreversibly coded into the syntax.
Spaces of course are superior to tabs because:
* You have just one way to specify whitespace, not two. Ambiguity breeds
mistakes.
* The confusion surrounding 'use tabs to indent, spaces to justify' is gone.
* Tab indents push your code to the right, making your screen seriously
unbalanced.
* Tabs will be rendered incorrectly on editors who are misconfigured not
to use tab stops of eight positions.
* Tabs are rendered badly in patches, causing off-by-one errors in almost
every line.
* It is the QEMU coding style.
Do not leave whitespace dangling off the ends of lines.
Multiline Indent
----------------
There are several places where indent is necessary:
* if/else
* while/for
* function definition & call
When breaking up a long line to fit within line width, we need a proper indent
for the following lines.
In case of if/else, while/for, align the secondary lines just after the
opening parenthesis of the first.
For example:
.. code-block:: c
if (a == 1 &&
b == 2) {
while (a == 1 &&
b == 2) {
In case of function, there are several variants:
* 4 spaces indent from the beginning
* align the secondary lines just after the opening parenthesis of the first
For example:
.. code-block:: c
do_something(x, y,
z);
do_something(x, y,
z);
do_something(x, do_another(y,
z));
Line width
==========
Lines should be 80 characters; try not to make them longer.
Sometimes it is hard to do, especially when dealing with QEMU subsystems
that use long function or symbol names. Even in that case, do not make
lines much longer than 80 characters.
Rationale:
* Some people like to tile their 24" screens with a 6x4 matrix of 80x24
xterms and use vi in all of them. The best way to punish them is to
let them keep doing it.
* Code and especially patches is much more readable if limited to a sane
line length. Eighty is traditional.
* The four-space indentation makes the most common excuse ("But look
at all that white space on the left!") moot.
* It is the QEMU coding style.
Naming
======
Variables are lower_case_with_underscores; easy to type and read. Structured
type names are in CamelCase; harder to type but standing out. Enum type
names and function type names should also be in CamelCase. Scalar type
names are lower_case_with_underscores_ending_with_a_t, like the POSIX
uint64_t and family. Note that this last convention contradicts POSIX
and is therefore likely to be changed.
When wrapping standard library functions, use the prefix ``qemu_`` to alert
readers that they are seeing a wrapped version; otherwise avoid this prefix.
Block structure
===============
Every indented statement is braced; even if the block contains just one
statement. The opening brace is on the line that contains the control
flow statement that introduces the new block; the closing brace is on the
same line as the else keyword, or on a line by itself if there is no else
keyword. Example:
.. code-block:: c
if (a == 5) {
printf("a was 5.\n");
} else if (a == 6) {
printf("a was 6.\n");
} else {
printf("a was something else entirely.\n");
}
Note that 'else if' is considered a single statement; otherwise a long if/
else if/else if/.../else sequence would need an indent for every else
statement.
An exception is the opening brace for a function; for reasons of tradition
and clarity it comes on a line by itself:
.. code-block:: c
void a_function(void)
{
do_something();
}
Rationale: a consistent (except for functions...) bracing style reduces
ambiguity and avoids needless churn when lines are added or removed.
Furthermore, it is the QEMU coding style.
Declarations
============
Mixed declarations (interleaving statements and declarations within
blocks) are generally not allowed; declarations should be at the beginning
of blocks.
Every now and then, an exception is made for declarations inside a
#ifdef or #ifndef block: if the code looks nicer, such declarations can
be placed at the top of the block even if there are statements above.
On the other hand, however, it's often best to move that #ifdef/#ifndef
block to a separate function altogether.
Conditional statements
======================
When comparing a variable for (in)equality with a constant, list the
constant on the right, as in:
.. code-block:: c
if (a == 1) {
/* Reads like: "If a equals 1" */
do_something();
}
Rationale: Yoda conditions (as in 'if (1 == a)') are awkward to read.
Besides, good compilers already warn users when '==' is mis-typed as '=',
even when the constant is on the right.
Comment style
=============
We use traditional C-style /``*`` ``*``/ comments and avoid // comments.
Rationale: The // form is valid in C99, so this is purely a matter of
consistency of style. The checkpatch script will warn you about this.
Multiline comment blocks should have a row of stars on the left,
and the initial /``*`` and terminating ``*``/ both on their own lines:
.. code-block:: c
/*
* like
* this
*/
This is the same format required by the Linux kernel coding style.
(Some of the existing comments in the codebase use the GNU Coding
Standards form which does not have stars on the left, or other
variations; avoid these when writing new comments, but don't worry
about converting to the preferred form unless you're editing that
comment anyway.)
Rationale: Consistency, and ease of visually picking out a multiline
comment from the surrounding code.
Language usage
**************
Preprocessor
============
Variadic macros
---------------
For variadic macros, stick with this C99-like syntax:
.. code-block:: c
#define DPRINTF(fmt, ...) \
do { printf("IRQ: " fmt, ## __VA_ARGS__); } while (0)
Include directives
------------------
Order include directives as follows:
.. code-block:: c
#include "qemu/osdep.h" /* Always first... */
#include <...> /* then system headers... */
#include "..." /* and finally QEMU headers. */
The "qemu/osdep.h" header contains preprocessor macros that affect the behavior
of core system headers like <stdint.h>. It must be the first include so that
core system headers included by external libraries get the preprocessor macros
that QEMU depends on.
Do not include "qemu/osdep.h" from header files since the .c file will have
already included it.
C types
=======
It should be common sense to use the right type, but we have collected
a few useful guidelines here.
Scalars
-------
If you're using "int" or "long", odds are good that there's a better type.
If a variable is counting something, it should be declared with an
unsigned type.
If it's host memory-size related, size_t should be a good choice (use
ssize_t only if required). Guest RAM memory offsets must use ram_addr_t,
but only for RAM, it may not cover whole guest address space.
If it's file-size related, use off_t.
If it's file-offset related (i.e., signed), use off_t.
If it's just counting small numbers use "unsigned int";
(on all but oddball embedded systems, you can assume that that
type is at least four bytes wide).
In the event that you require a specific width, use a standard type
like int32_t, uint32_t, uint64_t, etc. The specific types are
mandatory for VMState fields.
Don't use Linux kernel internal types like u32, __u32 or __le32.
Use hwaddr for guest physical addresses except pcibus_t
for PCI addresses. In addition, ram_addr_t is a QEMU internal address
space that maps guest RAM physical addresses into an intermediate
address space that can map to host virtual address spaces. Generally
speaking, the size of guest memory can always fit into ram_addr_t but
it would not be correct to store an actual guest physical address in a
ram_addr_t.
For CPU virtual addresses there are several possible types.
vaddr is the best type to use to hold a CPU virtual address in
target-independent code. It is guaranteed to be large enough to hold a
virtual address for any target, and it does not change size from target
to target. It is always unsigned.
target_ulong is a type the size of a virtual address on the CPU; this means
it may be 32 or 64 bits depending on which target is being built. It should
therefore be used only in target-specific code, and in some
performance-critical built-per-target core code such as the TLB code.
There is also a signed version, target_long.
abi_ulong is for the ``*``-user targets, and represents a type the size of
'void ``*``' in that target's ABI. (This may not be the same as the size of a
full CPU virtual address in the case of target ABIs which use 32 bit pointers
on 64 bit CPUs, like sparc32plus.) Definitions of structures that must match
the target's ABI must use this type for anything that on the target is defined
to be an 'unsigned long' or a pointer type.
There is also a signed version, abi_long.
Of course, take all of the above with a grain of salt. If you're about
to use some system interface that requires a type like size_t, pid_t or
off_t, use matching types for any corresponding variables.
Also, if you try to use e.g., "unsigned int" as a type, and that
conflicts with the signedness of a related variable, sometimes
it's best just to use the *wrong* type, if "pulling the thread"
and fixing all related variables would be too invasive.
Finally, while using descriptive types is important, be careful not to
go overboard. If whatever you're doing causes warnings, or requires
casts, then reconsider or ask for help.
Pointers
--------
Ensure that all of your pointers are "const-correct".
Unless a pointer is used to modify the pointed-to storage,
give it the "const" attribute. That way, the reader knows
up-front that this is a read-only pointer. Perhaps more
importantly, if we're diligent about this, when you see a non-const
pointer, you're guaranteed that it is used to modify the storage
it points to, or it is aliased to another pointer that is.
Typedefs
--------
Typedefs are used to eliminate the redundant 'struct' keyword, since type
names have a different style than other identifiers ("CamelCase" versus
"snake_case"). Each named struct type should have a CamelCase name and a
corresponding typedef.
Since certain C compilers choke on duplicated typedefs, you should avoid
them and declare a typedef only in one header file. For common types,
you can use "include/qemu/typedefs.h" for example. However, as a matter
of convenience it is also perfectly fine to use forward struct
definitions instead of typedefs in headers and function prototypes; this
avoids problems with duplicated typedefs and reduces the need to include
headers from other headers.
Reserved namespaces in C and POSIX
----------------------------------
Underscore capital, double underscore, and underscore 't' suffixes should be
avoided.
Low level memory management
===========================
Use of the malloc/free/realloc/calloc/valloc/memalign/posix_memalign
APIs is not allowed in the QEMU codebase. Instead of these routines,
use the GLib memory allocation routines g_malloc/g_malloc0/g_new/
g_new0/g_realloc/g_free or QEMU's qemu_memalign/qemu_blockalign/qemu_vfree
APIs.
Please note that g_malloc will exit on allocation failure, so there
is no need to test for failure (as you would have to with malloc).
Calling g_malloc with a zero size is valid and will return NULL.
Prefer g_new(T, n) instead of g_malloc(sizeof(T) ``*`` n) for the following
reasons:
* It catches multiplication overflowing size_t;
* It returns T ``*`` instead of void ``*``, letting compiler catch more type errors.
Declarations like
.. code-block:: c
T *v = g_malloc(sizeof(*v))
are acceptable, though.
Memory allocated by qemu_memalign or qemu_blockalign must be freed with
qemu_vfree, since breaking this will cause problems on Win32.
String manipulation
===================
Do not use the strncpy function. As mentioned in the man page, it does *not*
guarantee a NULL-terminated buffer, which makes it extremely dangerous to use.
It also zeros trailing destination bytes out to the specified length. Instead,
use this similar function when possible, but note its different signature:
.. code-block:: c
void pstrcpy(char *dest, int dest_buf_size, const char *src)
Don't use strcat because it can't check for buffer overflows, but:
.. code-block:: c
char *pstrcat(char *buf, int buf_size, const char *s)
The same limitation exists with sprintf and vsprintf, so use snprintf and
vsnprintf.
QEMU provides other useful string functions:
.. code-block:: c
int strstart(const char *str, const char *val, const char **ptr)
int stristart(const char *str, const char *val, const char **ptr)
int qemu_strnlen(const char *s, int max_len)
There are also replacement character processing macros for isxyz and toxyz,
so instead of e.g. isalnum you should use qemu_isalnum.
Because of the memory management rules, you must use g_strdup/g_strndup
instead of plain strdup/strndup.
Printf-style functions
======================
Whenever you add a new printf-style function, i.e., one with a format
string argument and following "..." in its prototype, be sure to use
gcc's printf attribute directive in the prototype.
This makes it so gcc's -Wformat and -Wformat-security options can do
their jobs and cross-check format strings with the number and types
of arguments.
C standard, implementation defined and undefined behaviors
==========================================================
C code in QEMU should be written to the C99 language specification. A copy
of the final version of the C99 standard with corrigenda TC1, TC2, and TC3
included, formatted as a draft, can be downloaded from:
`<http://www.open-std.org/jtc1/sc22/WG14/www/docs/n1256.pdf>`_
The C language specification defines regions of undefined behavior and
implementation defined behavior (to give compiler authors enough leeway to
produce better code). In general, code in QEMU should follow the language
specification and avoid both undefined and implementation defined
constructs. ("It works fine on the gcc I tested it with" is not a valid
argument...) However there are a few areas where we allow ourselves to
assume certain behaviors because in practice all the platforms we care about
behave in the same way and writing strictly conformant code would be
painful. These are:
* you may assume that integers are 2s complement representation
* you may assume that right shift of a signed integer duplicates
the sign bit (ie it is an arithmetic shift, not a logical shift)
In addition, QEMU assumes that the compiler does not use the latitude
given in C99 and C11 to treat aspects of signed '<<' as undefined, as
documented in the GNU Compiler Collection manual starting at version 4.0.
Automatic memory deallocation
=============================
QEMU has a mandatory dependency either the GCC or CLang compiler. As
such it has the freedom to make use of a C language extension for
automatically running a cleanup function when a stack variable goes
out of scope. This can be used to simplify function cleanup paths,
often allowing many goto jumps to be eliminated, through automatic
free'ing of memory.
The GLib2 library provides a number of functions/macros for enabling
automatic cleanup:
`<https://developer.gnome.org/glib/stable/glib-Miscellaneous-Macros.html>`_
Most notably:
* g_autofree - will invoke g_free() on the variable going out of scope
* g_autoptr - for structs / objects, will invoke the cleanup func created
by a previous use of G_DEFINE_AUTOPTR_CLEANUP_FUNC. This is
supported for most GLib data types and GObjects
For example, instead of
.. code-block:: c
int somefunc(void) {
int ret = -1;
char *foo = g_strdup_printf("foo%", "wibble");
GList *bar = .....
if (eek) {
goto cleanup;
}
ret = 0;
cleanup:
g_free(foo);
g_list_free(bar);
return ret;
}
Using g_autofree/g_autoptr enables the code to be written as:
.. code-block:: c
int somefunc(void) {
g_autofree char *foo = g_strdup_printf("foo%", "wibble");
g_autoptr (GList) bar = .....
if (eek) {
return -1;
}
return 0;
}
While this generally results in simpler, less leak-prone code, there
are still some caveats to beware of
* Variables declared with g_auto* MUST always be initialized,
otherwise the cleanup function will use uninitialized stack memory
* If a variable declared with g_auto* holds a value which must
live beyond the life of the function, that value must be saved
and the original variable NULL'd out. This can be simpler using
g_steal_pointer
.. code-block:: c
char *somefunc(void) {
g_autofree char *foo = g_strdup_printf("foo%", "wibble");
g_autoptr (GList) bar = .....
if (eek) {
return NULL;
}
return g_steal_pointer(&foo);
}
QEMU Specific Idioms
********************
Error handling and reporting
============================
Reporting errors to the human user
----------------------------------
Do not use printf(), fprintf() or monitor_printf(). Instead, use
error_report() or error_vreport() from error-report.h. This ensures the
error is reported in the right place (current monitor or stderr), and in
a uniform format.
Use error_printf() & friends to print additional information.
error_report() prints the current location. In certain common cases
like command line parsing, the current location is tracked
automatically. To manipulate it manually, use the loc_``*``() from
error-report.h.
Propagating errors
------------------
An error can't always be reported to the user right where it's detected,
but often needs to be propagated up the call chain to a place that can
handle it. This can be done in various ways.
The most flexible one is Error objects. See error.h for usage
information.
Use the simplest suitable method to communicate success / failure to
callers. Stick to common methods: non-negative on success / -1 on
error, non-negative / -errno, non-null / null, or Error objects.
Example: when a function returns a non-null pointer on success, and it
can fail only in one way (as far as the caller is concerned), returning
null on failure is just fine, and certainly simpler and a lot easier on
the eyes than propagating an Error object through an Error ``*````*`` parameter.
Example: when a function's callers need to report details on failure
only the function really knows, use Error ``*````*``, and set suitable errors.
Do not report an error to the user when you're also returning an error
for somebody else to handle. Leave the reporting to the place that
consumes the error returned.
Handling errors
---------------
Calling exit() is fine when handling configuration errors during
startup. It's problematic during normal operation. In particular,
monitor commands should never exit().
Do not call exit() or abort() to handle an error that can be triggered
by the guest (e.g., some unimplemented corner case in guest code
translation or device emulation). Guests should not be able to
terminate QEMU.
Note that &error_fatal is just another way to exit(1), and &error_abort
is just another way to abort().
trace-events style
==================
0x prefix
---------
In trace-events files, use a '0x' prefix to specify hex numbers, as in:
.. code-block::
some_trace(unsigned x, uint64_t y) "x 0x%x y 0x" PRIx64
An exception is made for groups of numbers that are hexadecimal by
convention and separated by the symbols '.', '/', ':', or ' ' (such as
PCI bus id):
.. code-block::
another_trace(int cssid, int ssid, int dev_num) "bus id: %x.%x.%04x"
However, you can use '0x' for such groups if you want. Anyway, be sure that
it is obvious that numbers are in hex, ex.:
.. code-block::
data_dump(uint8_t c1, uint8_t c2, uint8_t c3) "bytes (in hex): %02x %02x %02x"
Rationale: hex numbers are hard to read in logs when there is no 0x prefix,
especially when (occasionally) the representation doesn't contain any letters
and especially in one line with other decimal numbers. Number groups are allowed
to not use '0x' because for some things notations like %x.%x.%x are used not
only in Qemu. Also dumping raw data bytes with '0x' is less readable.
'#' printf flag
---------------
Do not use printf flag '#', like '%#x'.
Rationale: there are two ways to add a '0x' prefix to printed number: '0x%...'
and '%#...'. For consistency the only one way should be used. Arguments for
'0x%' are:
* it is more popular
* '%#' omits the 0x for the value 0 which makes output inconsistent
+12 -10
View File
@@ -1,8 +1,8 @@
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
@@ -10,7 +10,7 @@
as the successor of the GNU Library Public License, version 2, hence
the version number 2.1.]
Preamble
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General Public
@@ -112,7 +112,7 @@ modification follow. Pay close attention to the difference between a
former contains code derived from the library, whereas the latter must
be combined with the library in order to run.
GNU LESSER GENERAL PUBLIC LICENSE
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other
@@ -146,7 +146,7 @@ such a program is covered only if its contents constitute a work based
on the Library (independent of the use of the Library in a tool for
writing it). Whether that is true depends on what the Library does
and what the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library's
complete source code as you receive it, in any medium, provided that
you conspicuously and appropriately publish on each copy an
@@ -432,7 +432,7 @@ decision will be guided by the two goals of preserving the free status
of all derivatives of our free software and of promoting the sharing
and reuse of software generally.
NO WARRANTY
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
@@ -455,7 +455,7 @@ FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
END OF TERMS AND CONDITIONS
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries
@@ -476,7 +476,7 @@ convey the exclusion of warranty; and each file should have at least the
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
version 2 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -485,7 +485,7 @@ convey the exclusion of warranty; and each file should have at least the
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Also add information on how to contact you by electronic and paper mail.
@@ -500,3 +500,5 @@ necessary. Here is a sample; alter the names:
Ty Coon, President of Vice
That's all there is to it!
+270
View File
@@ -0,0 +1,270 @@
A. HISTORY OF THE SOFTWARE
==========================
Python was created in the early 1990s by Guido van Rossum at Stichting
Mathematisch Centrum (CWI, see http://www.cwi.nl) in the Netherlands
as a successor of a language called ABC. Guido remains Python's
principal author, although it includes many contributions from others.
In 1995, Guido continued his work on Python at the Corporation for
National Research Initiatives (CNRI, see http://www.cnri.reston.va.us)
in Reston, Virginia where he released several versions of the
software.
In May 2000, Guido and the Python core development team moved to
BeOpen.com to form the BeOpen PythonLabs team. In October of the same
year, the PythonLabs team moved to Digital Creations (now Zope
Corporation, see http://www.zope.com). In 2001, the Python Software
Foundation (PSF, see http://www.python.org/psf/) was formed, a
non-profit organization created specifically to own Python-related
Intellectual Property. Zope Corporation is a sponsoring member of
the PSF.
All Python releases are Open Source (see http://www.opensource.org for
the Open Source Definition). Historically, most, but not all, Python
releases have also been GPL-compatible; the table below summarizes
the various releases.
Release Derived Year Owner GPL-
from compatible? (1)
0.9.0 thru 1.2 1991-1995 CWI yes
1.3 thru 1.5.2 1.2 1995-1999 CNRI yes
1.6 1.5.2 2000 CNRI no
2.0 1.6 2000 BeOpen.com no
1.6.1 1.6 2001 CNRI yes (2)
2.1 2.0+1.6.1 2001 PSF no
2.0.1 2.0+1.6.1 2001 PSF yes
2.1.1 2.1+2.0.1 2001 PSF yes
2.2 2.1.1 2001 PSF yes
2.1.2 2.1.1 2002 PSF yes
2.1.3 2.1.2 2002 PSF yes
2.2.1 2.2 2002 PSF yes
2.2.2 2.2.1 2002 PSF yes
2.2.3 2.2.2 2003 PSF yes
2.3 2.2.2 2002-2003 PSF yes
2.3.1 2.3 2002-2003 PSF yes
2.3.2 2.3.1 2002-2003 PSF yes
2.3.3 2.3.2 2002-2003 PSF yes
2.3.4 2.3.3 2004 PSF yes
2.3.5 2.3.4 2005 PSF yes
2.4 2.3 2004 PSF yes
2.4.1 2.4 2005 PSF yes
2.4.2 2.4.1 2005 PSF yes
2.4.3 2.4.2 2006 PSF yes
2.5 2.4 2006 PSF yes
2.7 2.6 2010 PSF yes
Footnotes:
(1) GPL-compatible doesn't mean that we're distributing Python under
the GPL. All Python licenses, unlike the GPL, let you distribute
a modified version without making your changes open source. The
GPL-compatible licenses make it possible to combine Python with
other software that is released under the GPL; the others don't.
(2) According to Richard Stallman, 1.6.1 is not GPL-compatible,
because its license has a choice of law clause. According to
CNRI, however, Stallman's lawyer has told CNRI's lawyer that 1.6.1
is "not incompatible" with the GPL.
Thanks to the many outside volunteers who have worked under Guido's
direction to make these releases possible.
B. TERMS AND CONDITIONS FOR ACCESSING OR OTHERWISE USING PYTHON
===============================================================
PYTHON SOFTWARE FOUNDATION LICENSE VERSION 2
--------------------------------------------
1. This LICENSE AGREEMENT is between the Python Software Foundation
("PSF"), and the Individual or Organization ("Licensee") accessing and
otherwise using this software ("Python") in source or binary form and
its associated documentation.
2. Subject to the terms and conditions of this License Agreement, PSF
hereby grants Licensee a nonexclusive, royalty-free, world-wide
license to reproduce, analyze, test, perform and/or display publicly,
prepare derivative works, distribute, and otherwise use Python
alone or in any derivative version, provided, however, that PSF's
License Agreement and PSF's notice of copyright, i.e., "Copyright (c)
2001, 2002, 2003, 2004, 2005, 2006 Python Software Foundation; All Rights
Reserved" are retained in Python alone or in any derivative version
prepared by Licensee.
3. In the event Licensee prepares a derivative work that is based on
or incorporates Python or any part thereof, and wants to make
the derivative work available to others as provided herein, then
Licensee hereby agrees to include in any such work a brief summary of
the changes made to Python.
4. PSF is making Python available to Licensee on an "AS IS"
basis. PSF MAKES NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR
IMPLIED. BY WAY OF EXAMPLE, BUT NOT LIMITATION, PSF MAKES NO AND
DISCLAIMS ANY REPRESENTATION OR WARRANTY OF MERCHANTABILITY OR FITNESS
FOR ANY PARTICULAR PURPOSE OR THAT THE USE OF PYTHON WILL NOT
INFRINGE ANY THIRD PARTY RIGHTS.
5. PSF SHALL NOT BE LIABLE TO LICENSEE OR ANY OTHER USERS OF PYTHON
FOR ANY INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES OR LOSS AS
A RESULT OF MODIFYING, DISTRIBUTING, OR OTHERWISE USING PYTHON,
OR ANY DERIVATIVE THEREOF, EVEN IF ADVISED OF THE POSSIBILITY THEREOF.
6. This License Agreement will automatically terminate upon a material
breach of its terms and conditions.
7. Nothing in this License Agreement shall be deemed to create any
relationship of agency, partnership, or joint venture between PSF and
Licensee. This License Agreement does not grant permission to use PSF
trademarks or trade name in a trademark sense to endorse or promote
products or services of Licensee, or any third party.
8. By copying, installing or otherwise using Python, Licensee
agrees to be bound by the terms and conditions of this License
Agreement.
BEOPEN.COM LICENSE AGREEMENT FOR PYTHON 2.0
-------------------------------------------
BEOPEN PYTHON OPEN SOURCE LICENSE AGREEMENT VERSION 1
1. This LICENSE AGREEMENT is between BeOpen.com ("BeOpen"), having an
office at 160 Saratoga Avenue, Santa Clara, CA 95051, and the
Individual or Organization ("Licensee") accessing and otherwise using
this software in source or binary form and its associated
documentation ("the Software").
2. Subject to the terms and conditions of this BeOpen Python License
Agreement, BeOpen hereby grants Licensee a non-exclusive,
royalty-free, world-wide license to reproduce, analyze, test, perform
and/or display publicly, prepare derivative works, distribute, and
otherwise use the Software alone or in any derivative version,
provided, however, that the BeOpen Python License is retained in the
Software, alone or in any derivative version prepared by Licensee.
3. BeOpen is making the Software available to Licensee on an "AS IS"
basis. BEOPEN MAKES NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR
IMPLIED. BY WAY OF EXAMPLE, BUT NOT LIMITATION, BEOPEN MAKES NO AND
DISCLAIMS ANY REPRESENTATION OR WARRANTY OF MERCHANTABILITY OR FITNESS
FOR ANY PARTICULAR PURPOSE OR THAT THE USE OF THE SOFTWARE WILL NOT
INFRINGE ANY THIRD PARTY RIGHTS.
4. BEOPEN SHALL NOT BE LIABLE TO LICENSEE OR ANY OTHER USERS OF THE
SOFTWARE FOR ANY INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES OR LOSS
AS A RESULT OF USING, MODIFYING OR DISTRIBUTING THE SOFTWARE, OR ANY
DERIVATIVE THEREOF, EVEN IF ADVISED OF THE POSSIBILITY THEREOF.
5. This License Agreement will automatically terminate upon a material
breach of its terms and conditions.
6. This License Agreement shall be governed by and interpreted in all
respects by the law of the State of California, excluding conflict of
law provisions. Nothing in this License Agreement shall be deemed to
create any relationship of agency, partnership, or joint venture
between BeOpen and Licensee. This License Agreement does not grant
permission to use BeOpen trademarks or trade names in a trademark
sense to endorse or promote products or services of Licensee, or any
third party. As an exception, the "BeOpen Python" logos available at
http://www.pythonlabs.com/logos.html may be used according to the
permissions granted on that web page.
7. By copying, installing or otherwise using the software, Licensee
agrees to be bound by the terms and conditions of this License
Agreement.
CNRI LICENSE AGREEMENT FOR PYTHON 1.6.1
---------------------------------------
1. This LICENSE AGREEMENT is between the Corporation for National
Research Initiatives, having an office at 1895 Preston White Drive,
Reston, VA 20191 ("CNRI"), and the Individual or Organization
("Licensee") accessing and otherwise using Python 1.6.1 software in
source or binary form and its associated documentation.
2. Subject to the terms and conditions of this License Agreement, CNRI
hereby grants Licensee a nonexclusive, royalty-free, world-wide
license to reproduce, analyze, test, perform and/or display publicly,
prepare derivative works, distribute, and otherwise use Python 1.6.1
alone or in any derivative version, provided, however, that CNRI's
License Agreement and CNRI's notice of copyright, i.e., "Copyright (c)
1995-2001 Corporation for National Research Initiatives; All Rights
Reserved" are retained in Python 1.6.1 alone or in any derivative
version prepared by Licensee. Alternately, in lieu of CNRI's License
Agreement, Licensee may substitute the following text (omitting the
quotes): "Python 1.6.1 is made available subject to the terms and
conditions in CNRI's License Agreement. This Agreement together with
Python 1.6.1 may be located on the Internet using the following
unique, persistent identifier (known as a handle): 1895.22/1013. This
Agreement may also be obtained from a proxy server on the Internet
using the following URL: http://hdl.handle.net/1895.22/1013".
3. In the event Licensee prepares a derivative work that is based on
or incorporates Python 1.6.1 or any part thereof, and wants to make
the derivative work available to others as provided herein, then
Licensee hereby agrees to include in any such work a brief summary of
the changes made to Python 1.6.1.
4. CNRI is making Python 1.6.1 available to Licensee on an "AS IS"
basis. CNRI MAKES NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR
IMPLIED. BY WAY OF EXAMPLE, BUT NOT LIMITATION, CNRI MAKES NO AND
DISCLAIMS ANY REPRESENTATION OR WARRANTY OF MERCHANTABILITY OR FITNESS
FOR ANY PARTICULAR PURPOSE OR THAT THE USE OF PYTHON 1.6.1 WILL NOT
INFRINGE ANY THIRD PARTY RIGHTS.
5. CNRI SHALL NOT BE LIABLE TO LICENSEE OR ANY OTHER USERS OF PYTHON
1.6.1 FOR ANY INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES OR LOSS AS
A RESULT OF MODIFYING, DISTRIBUTING, OR OTHERWISE USING PYTHON 1.6.1,
OR ANY DERIVATIVE THEREOF, EVEN IF ADVISED OF THE POSSIBILITY THEREOF.
6. This License Agreement will automatically terminate upon a material
breach of its terms and conditions.
7. This License Agreement shall be governed by the federal
intellectual property law of the United States, including without
limitation the federal copyright law, and, to the extent such
U.S. federal law does not apply, by the law of the Commonwealth of
Virginia, excluding Virginia's conflict of law provisions.
Notwithstanding the foregoing, with regard to derivative works based
on Python 1.6.1 that incorporate non-separable material that was
previously distributed under the GNU General Public License (GPL), the
law of the Commonwealth of Virginia shall govern this License
Agreement only as to issues arising under or with respect to
Paragraphs 4, 5, and 7 of this License Agreement. Nothing in this
License Agreement shall be deemed to create any relationship of
agency, partnership, or joint venture between CNRI and Licensee. This
License Agreement does not grant permission to use CNRI trademarks or
trade name in a trademark sense to endorse or promote products or
services of Licensee, or any third party.
8. By clicking on the "ACCEPT" button where indicated, or by copying,
installing or otherwise using Python 1.6.1, Licensee agrees to be
bound by the terms and conditions of this License Agreement.
ACCEPT
CWI LICENSE AGREEMENT FOR PYTHON 0.9.0 THROUGH 1.2
--------------------------------------------------
Copyright (c) 1991 - 1995, Stichting Mathematisch Centrum Amsterdam,
The Netherlands. All rights reserved.
Permission to use, copy, modify, and distribute this software and its
documentation for any purpose and without fee is hereby granted,
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation, and that the name of Stichting Mathematisch
Centrum or CWI not be used in advertising or publicity pertaining to
distribution of the software without specific, written prior
permission.
STICHTING MATHEMATISCH CENTRUM DISCLAIMS ALL WARRANTIES WITH REGARD TO
THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS, IN NO EVENT SHALL STICHTING MATHEMATISCH CENTRUM BE LIABLE
FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+236
View File
@@ -0,0 +1,236 @@
1. Preprocessor
1.1. Variadic macros
For variadic macros, stick with this C99-like syntax:
#define DPRINTF(fmt, ...) \
do { printf("IRQ: " fmt, ## __VA_ARGS__); } while (0)
1.2. Include directives
Order include directives as follows:
#include "qemu/osdep.h" /* Always first... */
#include <...> /* then system headers... */
#include "..." /* and finally QEMU headers. */
The "qemu/osdep.h" header contains preprocessor macros that affect the behavior
of core system headers like <stdint.h>. It must be the first include so that
core system headers included by external libraries get the preprocessor macros
that QEMU depends on.
Do not include "qemu/osdep.h" from header files since the .c file will have
already included it.
2. C types
It should be common sense to use the right type, but we have collected
a few useful guidelines here.
2.1. Scalars
If you're using "int" or "long", odds are good that there's a better type.
If a variable is counting something, it should be declared with an
unsigned type.
If it's host memory-size related, size_t should be a good choice (use
ssize_t only if required). Guest RAM memory offsets must use ram_addr_t,
but only for RAM, it may not cover whole guest address space.
If it's file-size related, use off_t.
If it's file-offset related (i.e., signed), use off_t.
If it's just counting small numbers use "unsigned int";
(on all but oddball embedded systems, you can assume that that
type is at least four bytes wide).
In the event that you require a specific width, use a standard type
like int32_t, uint32_t, uint64_t, etc. The specific types are
mandatory for VMState fields.
Don't use Linux kernel internal types like u32, __u32 or __le32.
Use hwaddr for guest physical addresses except pcibus_t
for PCI addresses. In addition, ram_addr_t is a QEMU internal address
space that maps guest RAM physical addresses into an intermediate
address space that can map to host virtual address spaces. Generally
speaking, the size of guest memory can always fit into ram_addr_t but
it would not be correct to store an actual guest physical address in a
ram_addr_t.
For CPU virtual addresses there are several possible types.
vaddr is the best type to use to hold a CPU virtual address in
target-independent code. It is guaranteed to be large enough to hold a
virtual address for any target, and it does not change size from target
to target. It is always unsigned.
target_ulong is a type the size of a virtual address on the CPU; this means
it may be 32 or 64 bits depending on which target is being built. It should
therefore be used only in target-specific code, and in some
performance-critical built-per-target core code such as the TLB code.
There is also a signed version, target_long.
abi_ulong is for the *-user targets, and represents a type the size of
'void *' in that target's ABI. (This may not be the same as the size of a
full CPU virtual address in the case of target ABIs which use 32 bit pointers
on 64 bit CPUs, like sparc32plus.) Definitions of structures that must match
the target's ABI must use this type for anything that on the target is defined
to be an 'unsigned long' or a pointer type.
There is also a signed version, abi_long.
Of course, take all of the above with a grain of salt. If you're about
to use some system interface that requires a type like size_t, pid_t or
off_t, use matching types for any corresponding variables.
Also, if you try to use e.g., "unsigned int" as a type, and that
conflicts with the signedness of a related variable, sometimes
it's best just to use the *wrong* type, if "pulling the thread"
and fixing all related variables would be too invasive.
Finally, while using descriptive types is important, be careful not to
go overboard. If whatever you're doing causes warnings, or requires
casts, then reconsider or ask for help.
2.2. Pointers
Ensure that all of your pointers are "const-correct".
Unless a pointer is used to modify the pointed-to storage,
give it the "const" attribute. That way, the reader knows
up-front that this is a read-only pointer. Perhaps more
importantly, if we're diligent about this, when you see a non-const
pointer, you're guaranteed that it is used to modify the storage
it points to, or it is aliased to another pointer that is.
2.3. Typedefs
Typedefs are used to eliminate the redundant 'struct' keyword.
2.4. Reserved namespaces in C and POSIX
Underscore capital, double underscore, and underscore 't' suffixes should be
avoided.
3. Low level memory management
Use of the malloc/free/realloc/calloc/valloc/memalign/posix_memalign
APIs is not allowed in the QEMU codebase. Instead of these routines,
use the GLib memory allocation routines g_malloc/g_malloc0/g_new/
g_new0/g_realloc/g_free or QEMU's qemu_memalign/qemu_blockalign/qemu_vfree
APIs.
Please note that g_malloc will exit on allocation failure, so there
is no need to test for failure (as you would have to with malloc).
Calling g_malloc with a zero size is valid and will return NULL.
Memory allocated by qemu_memalign or qemu_blockalign must be freed with
qemu_vfree, since breaking this will cause problems on Win32.
4. String manipulation
Do not use the strncpy function. As mentioned in the man page, it does *not*
guarantee a NULL-terminated buffer, which makes it extremely dangerous to use.
It also zeros trailing destination bytes out to the specified length. Instead,
use this similar function when possible, but note its different signature:
void pstrcpy(char *dest, int dest_buf_size, const char *src)
Don't use strcat because it can't check for buffer overflows, but:
char *pstrcat(char *buf, int buf_size, const char *s)
The same limitation exists with sprintf and vsprintf, so use snprintf and
vsnprintf.
QEMU provides other useful string functions:
int strstart(const char *str, const char *val, const char **ptr)
int stristart(const char *str, const char *val, const char **ptr)
int qemu_strnlen(const char *s, int max_len)
There are also replacement character processing macros for isxyz and toxyz,
so instead of e.g. isalnum you should use qemu_isalnum.
Because of the memory management rules, you must use g_strdup/g_strndup
instead of plain strdup/strndup.
5. Printf-style functions
Whenever you add a new printf-style function, i.e., one with a format
string argument and following "..." in its prototype, be sure to use
gcc's printf attribute directive in the prototype.
This makes it so gcc's -Wformat and -Wformat-security options can do
their jobs and cross-check format strings with the number and types
of arguments.
6. C standard, implementation defined and undefined behaviors
C code in QEMU should be written to the C99 language specification. A copy
of the final version of the C99 standard with corrigenda TC1, TC2, and TC3
included, formatted as a draft, can be downloaded from:
http://www.open-std.org/jtc1/sc22/WG14/www/docs/n1256.pdf
The C language specification defines regions of undefined behavior and
implementation defined behavior (to give compiler authors enough leeway to
produce better code). In general, code in QEMU should follow the language
specification and avoid both undefined and implementation defined
constructs. ("It works fine on the gcc I tested it with" is not a valid
argument...) However there are a few areas where we allow ourselves to
assume certain behaviors because in practice all the platforms we care about
behave in the same way and writing strictly conformant code would be
painful. These are:
* you may assume that integers are 2s complement representation
* you may assume that right shift of a signed integer duplicates
the sign bit (ie it is an arithmetic shift, not a logical shift)
In addition, QEMU assumes that the compiler does not use the latitude
given in C99 and C11 to treat aspects of signed '<<' as undefined, as
documented in the GNU Compiler Collection manual starting at version 4.0.
7. Error handling and reporting
7.1 Reporting errors to the human user
Do not use printf(), fprintf() or monitor_printf(). Instead, use
error_report() or error_vreport() from error-report.h. This ensures the
error is reported in the right place (current monitor or stderr), and in
a uniform format.
Use error_printf() & friends to print additional information.
error_report() prints the current location. In certain common cases
like command line parsing, the current location is tracked
automatically. To manipulate it manually, use the loc_*() from
error-report.h.
7.2 Propagating errors
An error can't always be reported to the user right where it's detected,
but often needs to be propagated up the call chain to a place that can
handle it. This can be done in various ways.
The most flexible one is Error objects. See error.h for usage
information.
Use the simplest suitable method to communicate success / failure to
callers. Stick to common methods: non-negative on success / -1 on
error, non-negative / -errno, non-null / null, or Error objects.
Example: when a function returns a non-null pointer on success, and it
can fail only in one way (as far as the caller is concerned), returning
null on failure is just fine, and certainly simpler and a lot easier on
the eyes than propagating an Error object through an Error ** parameter.
Example: when a function's callers need to report details on failure
only the function really knows, use Error **, and set suitable errors.
Do not report an error to the user when you're also returning an error
for somebody else to handle. Leave the reporting to the place that
consumes the error returned.
7.3 Handling errors
Calling exit() is fine when handling configuration errors during
startup. It's problematic during normal operation. In particular,
monitor commands should never exit().
Do not call exit() or abort() to handle an error that can be triggered
by the guest (e.g., some unimplemented corner case in guest code
translation or device emulation). Guests should not be able to
terminate QEMU.
Note that &error_fatal is just another way to exit(1), and &error_abort
is just another way to abort().
-42
View File
@@ -1,42 +0,0 @@
# These are "proxy" symbols used to pass config-host.mak values
# down to Kconfig. See also MINIKCONF_ARGS in the Makefile:
# these two need to be kept in sync.
config KVM
bool
config LINUX
bool
config OPENGL
bool
config X11
bool
config SPICE
bool
config IVSHMEM
bool
config TPM
bool
config VHOST_USER
bool
select VHOST
config VHOST_KERNEL
bool
select VHOST
config XEN
bool
select FSDEV_9P if VIRTFS
config VIRTFS
bool
config PVRDMA
bool
+10 -16
View File
@@ -1,26 +1,20 @@
The QEMU distribution includes both the QEMU emulator and
various firmware files. These are separate programs that are
distributed together for our users' convenience, and they have
separate licenses.
The following points clarify the QEMU license:
The following points clarify the license of the QEMU emulator:
1) QEMU as a whole is released under the GNU General Public License,
version 2.
1) The QEMU emulator as a whole is released under the GNU General
Public License, version 2.
2) Parts of the QEMU emulator have specific licenses which are compatible
with the GNU General Public License, version 2. Hence each source file
contains its own licensing information. Source files with no licensing
information are released under the GNU General Public License, version
2 or (at your option) any later version.
2) Parts of QEMU have specific licenses which are compatible with the
GNU General Public License, version 2. Hence each source file contains
its own licensing information. Source files with no licensing information
are released under the GNU General Public License, version 2 or (at your
option) any later version.
As of July 2013, contributions under version 2 of the GNU General Public
License (and no later version) are only accepted for the following files
or directories: bsd-user/, linux-user/, hw/vfio/, hw/xen/xen_pt*.
3) The Tiny Code Generator (TCG) is mostly under the BSD or MIT licenses;
but some parts may be GPLv2 or other licenses. Again, see the
specific licensing information in each source file.
3) The Tiny Code Generator (TCG) is released under the BSD license
(see license headers in files).
4) QEMU is a trademark of Fabrice Bellard.
+314 -1112
View File
File diff suppressed because it is too large. Load diff
+355 -553
View File
File diff suppressed because it is too large. Load diff
+141 -92
View File
@@ -1,40 +1,90 @@
#######################################################################
# Common libraries for tools and emulators
stub-obj-y = stubs/
util-obj-y = crypto/ util/ qobject/ qapi/
qom-obj-y = qom/
#######################################################################
# code used by both qemu system emulation and qemu-img
ifeq ($(call lor,$(CONFIG_SOFTMMU),$(CONFIG_TOOLS)),y)
stub-obj-y = stubs/ crypto/
util-obj-y = util/ qobject/ qapi/
util-obj-y += qapi/qapi-builtin-types.o
util-obj-y += qapi/qapi-types.o
util-obj-y += qapi/qapi-types-block-core.o
util-obj-y += qapi/qapi-types-block.o
util-obj-y += qapi/qapi-types-char.o
util-obj-y += qapi/qapi-types-common.o
util-obj-y += qapi/qapi-types-crypto.o
util-obj-y += qapi/qapi-types-introspect.o
util-obj-y += qapi/qapi-types-migration.o
util-obj-y += qapi/qapi-types-misc.o
util-obj-y += qapi/qapi-types-net.o
util-obj-y += qapi/qapi-types-rocker.o
util-obj-y += qapi/qapi-types-run-state.o
util-obj-y += qapi/qapi-types-sockets.o
util-obj-y += qapi/qapi-types-tpm.o
util-obj-y += qapi/qapi-types-trace.o
util-obj-y += qapi/qapi-types-transaction.o
util-obj-y += qapi/qapi-types-ui.o
util-obj-y += qapi/qapi-builtin-visit.o
util-obj-y += qapi/qapi-visit.o
util-obj-y += qapi/qapi-visit-block-core.o
util-obj-y += qapi/qapi-visit-block.o
util-obj-y += qapi/qapi-visit-char.o
util-obj-y += qapi/qapi-visit-common.o
util-obj-y += qapi/qapi-visit-crypto.o
util-obj-y += qapi/qapi-visit-introspect.o
util-obj-y += qapi/qapi-visit-migration.o
util-obj-y += qapi/qapi-visit-misc.o
util-obj-y += qapi/qapi-visit-net.o
util-obj-y += qapi/qapi-visit-rocker.o
util-obj-y += qapi/qapi-visit-run-state.o
util-obj-y += qapi/qapi-visit-sockets.o
util-obj-y += qapi/qapi-visit-tpm.o
util-obj-y += qapi/qapi-visit-trace.o
util-obj-y += qapi/qapi-visit-transaction.o
util-obj-y += qapi/qapi-visit-ui.o
util-obj-y += qapi/qapi-events.o
util-obj-y += qapi/qapi-events-block-core.o
util-obj-y += qapi/qapi-events-block.o
util-obj-y += qapi/qapi-events-char.o
util-obj-y += qapi/qapi-events-common.o
util-obj-y += qapi/qapi-events-crypto.o
util-obj-y += qapi/qapi-events-introspect.o
util-obj-y += qapi/qapi-events-migration.o
util-obj-y += qapi/qapi-events-misc.o
util-obj-y += qapi/qapi-events-net.o
util-obj-y += qapi/qapi-events-rocker.o
util-obj-y += qapi/qapi-events-run-state.o
util-obj-y += qapi/qapi-events-sockets.o
util-obj-y += qapi/qapi-events-tpm.o
util-obj-y += qapi/qapi-events-trace.o
util-obj-y += qapi/qapi-events-transaction.o
util-obj-y += qapi/qapi-events-ui.o
util-obj-y += qapi/qapi-introspect.o
chardev-obj-y = chardev/
authz-obj-y = authz/
#######################################################################
# block-obj-y is code used by both qemu system emulation and qemu-img
block-obj-y = nbd/
block-obj-y += block.o blockjob.o job.o
block-obj-y += nbd/
block-obj-y += block.o blockjob.o
block-obj-y += block/ scsi/
block-obj-y += qemu-io-cmds.o
block-obj-$(CONFIG_REPLICATION) += replication.o
block-obj-m = block/
#######################################################################
# crypto-obj-y is code used by both qemu system emulation and qemu-img
crypto-obj-y = crypto/
io-obj-y = io/
endif # CONFIG_SOFTMMU or CONFIG_TOOLS
crypto-aes-obj-y = crypto/
#######################################################################
# storage-daemon-obj-y is code used by qemu-storage-daemon (these objects are
# used for system emulation, too, but specified separately there)
# qom-obj-y is code used by both qemu system emulation and qemu-img
storage-daemon-obj-y = block/ monitor/ qapi/ qom/ storage-daemon/
storage-daemon-obj-y += blockdev.o blockdev-nbd.o iothread.o job-qmp.o
storage-daemon-obj-$(CONFIG_WIN32) += os-win32.o
storage-daemon-obj-$(CONFIG_POSIX) += os-posix.o
qom-obj-y = qom/
#######################################################################
# io-obj-y is code used by both qemu system emulation and qemu-img
io-obj-y = io/
######################################################################
# Target independent part of system emulation. The long term path is to
@@ -44,17 +94,13 @@ storage-daemon-obj-$(CONFIG_POSIX) += os-posix.o
ifeq ($(CONFIG_SOFTMMU),y)
common-obj-y = blockdev.o blockdev-nbd.o block/
common-obj-y += bootdevice.o iothread.o
common-obj-y += dump/
common-obj-y += job-qmp.o
common-obj-y += monitor/
common-obj-y += net/
common-obj-y += qdev-monitor.o
common-obj-y += qdev-monitor.o device-hotplug.o
common-obj-$(CONFIG_WIN32) += os-win32.o
common-obj-$(CONFIG_POSIX) += os-posix.o
common-obj-$(CONFIG_LINUX) += fsdev/
common-obj-y += accel/
common-obj-y += migration/
common-obj-y += audio/
@@ -65,10 +111,16 @@ common-obj-y += replay/
common-obj-y += ui/
common-obj-m += ui/
common-obj-y += bt-host.o bt-vhci.o
bt-host.o-cflags := $(BLUEZ_CFLAGS)
common-obj-y += dma-helpers.o
common-obj-y += vl.o
vl.o-cflags := $(GPROF_CFLAGS) $(SDL_CFLAGS)
common-obj-$(CONFIG_TPM) += tpm.o
common-obj-$(CONFIG_SLIRP) += slirp/
common-obj-y += backends/
common-obj-y += chardev/
@@ -78,9 +130,29 @@ qemu-seccomp.o-libs := $(SECCOMP_LIBS)
common-obj-$(CONFIG_FDT) += device_tree.o
common-obj-y += qapi/
######################################################################
# qapi
endif # CONFIG_SOFTMMU
common-obj-y += qapi/qapi-commands.o
common-obj-y += qapi/qapi-commands-block-core.o
common-obj-y += qapi/qapi-commands-block.o
common-obj-y += qapi/qapi-commands-char.o
common-obj-y += qapi/qapi-commands-common.o
common-obj-y += qapi/qapi-commands-crypto.o
common-obj-y += qapi/qapi-commands-introspect.o
common-obj-y += qapi/qapi-commands-migration.o
common-obj-y += qapi/qapi-commands-misc.o
common-obj-y += qapi/qapi-commands-net.o
common-obj-y += qapi/qapi-commands-rocker.o
common-obj-y += qapi/qapi-commands-run-state.o
common-obj-y += qapi/qapi-commands-sockets.o
common-obj-y += qapi/qapi-commands-tpm.o
common-obj-y += qapi/qapi-commands-trace.o
common-obj-y += qapi/qapi-commands-transaction.o
common-obj-y += qapi/qapi-commands-ui.o
common-obj-y += qapi/qapi-introspect.o
common-obj-y += qmp.o hmp.o
endif
#######################################################################
# Target-independent parts used in system and user emulation
@@ -96,6 +168,7 @@ version-obj-$(CONFIG_WIN32) += $(BUILD_DIR)/version.o
######################################################################
# tracing
util-obj-y += trace/
target-obj-y += trace/
######################################################################
# guest agent
@@ -108,7 +181,6 @@ qga-vss-dll-obj-y = qga/
######################################################################
# contrib
elf2dmp-obj-y = contrib/elf2dmp/
ivshmem-client-obj-$(CONFIG_IVSHMEM) = contrib/ivshmem-client/
ivshmem-server-obj-$(CONFIG_IVSHMEM) = contrib/ivshmem-server/
libvhost-user-obj-y = contrib/libvhost-user/
@@ -116,92 +188,69 @@ vhost-user-scsi.o-cflags := $(LIBISCSI_CFLAGS)
vhost-user-scsi.o-libs := $(LIBISCSI_LIBS)
vhost-user-scsi-obj-y = contrib/vhost-user-scsi/
vhost-user-blk-obj-y = contrib/vhost-user-blk/
rdmacm-mux-obj-y = contrib/rdmacm-mux/
vhost-user-input-obj-y = contrib/vhost-user-input/
vhost-user-gpu-obj-y = contrib/vhost-user-gpu/
virtiofsd-obj-y = tools/virtiofsd/
######################################################################
trace-events-subdirs =
trace-events-subdirs += accel/kvm
trace-events-subdirs += accel/tcg
trace-events-subdirs += backends
trace-events-subdirs += util
trace-events-subdirs += crypto
trace-events-subdirs += monitor
ifeq ($(CONFIG_USER_ONLY),y)
trace-events-subdirs += linux-user
endif
ifeq ($(CONFIG_BLOCK),y)
trace-events-subdirs += authz
trace-events-subdirs += block
trace-events-subdirs += io
trace-events-subdirs += nbd
trace-events-subdirs += scsi
endif
ifeq ($(CONFIG_SOFTMMU),y)
trace-events-subdirs += audio
trace-events-subdirs += migration
trace-events-subdirs += block
trace-events-subdirs += chardev
trace-events-subdirs += hw/9pfs
trace-events-subdirs += hw/acpi
trace-events-subdirs += hw/alpha
trace-events-subdirs += hw/arm
trace-events-subdirs += hw/audio
trace-events-subdirs += hw/block
trace-events-subdirs += hw/block/dataplane
trace-events-subdirs += hw/char
trace-events-subdirs += hw/dma
trace-events-subdirs += hw/hppa
trace-events-subdirs += hw/i2c
trace-events-subdirs += hw/i386
trace-events-subdirs += hw/i386/xen
trace-events-subdirs += hw/ide
trace-events-subdirs += hw/input
trace-events-subdirs += hw/intc
trace-events-subdirs += hw/isa
trace-events-subdirs += hw/mem
trace-events-subdirs += hw/mips
trace-events-subdirs += hw/misc
trace-events-subdirs += hw/misc/macio
trace-events-subdirs += hw/net
trace-events-subdirs += hw/nvram
trace-events-subdirs += hw/pci
trace-events-subdirs += hw/pci-host
trace-events-subdirs += hw/ppc
trace-events-subdirs += hw/rdma
trace-events-subdirs += hw/rdma/vmw
trace-events-subdirs += hw/rtc
trace-events-subdirs += hw/s390x
trace-events-subdirs += hw/virtio
trace-events-subdirs += hw/audio
trace-events-subdirs += hw/misc
trace-events-subdirs += hw/misc/macio
trace-events-subdirs += hw/usb
trace-events-subdirs += hw/scsi
trace-events-subdirs += hw/sd
trace-events-subdirs += hw/nvram
trace-events-subdirs += hw/display
trace-events-subdirs += hw/input
trace-events-subdirs += hw/timer
trace-events-subdirs += hw/dma
trace-events-subdirs += hw/sparc
trace-events-subdirs += hw/sparc64
trace-events-subdirs += hw/ssi
trace-events-subdirs += hw/timer
trace-events-subdirs += hw/tpm
trace-events-subdirs += hw/usb
trace-events-subdirs += hw/sd
trace-events-subdirs += hw/isa
trace-events-subdirs += hw/mem
trace-events-subdirs += hw/i386
trace-events-subdirs += hw/i386/xen
trace-events-subdirs += hw/9pfs
trace-events-subdirs += hw/ppc
trace-events-subdirs += hw/pci
trace-events-subdirs += hw/pci-host
trace-events-subdirs += hw/s390x
trace-events-subdirs += hw/vfio
trace-events-subdirs += hw/virtio
trace-events-subdirs += hw/watchdog
trace-events-subdirs += hw/acpi
trace-events-subdirs += hw/arm
trace-events-subdirs += hw/alpha
trace-events-subdirs += hw/hppa
trace-events-subdirs += hw/xen
trace-events-subdirs += hw/gpio
trace-events-subdirs += hw/riscv
trace-events-subdirs += migration
trace-events-subdirs += net
trace-events-subdirs += hw/ide
trace-events-subdirs += hw/tpm
trace-events-subdirs += ui
endif
trace-events-subdirs += hw/core
trace-events-subdirs += hw/display
trace-events-subdirs += qapi
trace-events-subdirs += qom
trace-events-subdirs += audio
trace-events-subdirs += net
trace-events-subdirs += target/arm
trace-events-subdirs += target/hppa
trace-events-subdirs += target/i386
trace-events-subdirs += target/mips
trace-events-subdirs += target/ppc
trace-events-subdirs += target/riscv
trace-events-subdirs += target/s390x
trace-events-subdirs += target/sparc
trace-events-subdirs += util
trace-events-subdirs += target/s390x
trace-events-subdirs += target/ppc
trace-events-subdirs += qom
trace-events-subdirs += linux-user
trace-events-subdirs += qapi
trace-events-subdirs += accel/tcg
trace-events-subdirs += accel/kvm
trace-events-subdirs += nbd
trace-events-subdirs += scsi
trace-events-files = $(SRC_PATH)/trace-events $(trace-events-subdirs:%=$(SRC_PATH)/%/trace-events)
+25 -74
View File
@@ -4,15 +4,12 @@ BUILD_DIR?=$(CURDIR)/..
include ../config-host.mak
include config-target.mak
include $(SRC_PATH)/rules.mak
ifdef CONFIG_SOFTMMU
include config-devices.mak
endif
include $(SRC_PATH)/rules.mak
$(call set-vpath, $(SRC_PATH):$(BUILD_DIR))
ifdef CONFIG_LINUX
QEMU_CFLAGS += -isystem ../linux-headers
QEMU_CFLAGS += -I../linux-headers
endif
QEMU_CFLAGS += -iquote .. -iquote $(SRC_PATH)/target/$(TARGET_BASE_ARCH) -DNEED_CPU_H
@@ -42,11 +39,8 @@ STPFILES=
config-target.h: config-target.h-timestamp
config-target.h-timestamp: config-target.mak
config-devices.h: config-devices.h-timestamp
config-devices.h-timestamp: config-devices.mak
ifdef CONFIG_TRACE_SYSTEMTAP
stap: $(QEMU_PROG).stp-installed $(QEMU_PROG).stp $(QEMU_PROG)-simpletrace.stp $(QEMU_PROG)-log.stp
stap: $(QEMU_PROG).stp-installed $(QEMU_PROG).stp $(QEMU_PROG)-simpletrace.stp
ifdef CONFIG_USER_ONLY
TARGET_TYPE=user
@@ -85,14 +79,6 @@ $(QEMU_PROG)-simpletrace.stp: $(BUILD_DIR)/trace-events-all $(tracetool-y)
--probe-prefix=qemu.$(TARGET_TYPE).$(TARGET_NAME) \
$< > $@,"GEN","$(TARGET_DIR)$(QEMU_PROG)-simpletrace.stp")
$(QEMU_PROG)-log.stp: $(BUILD_DIR)/trace-events-all $(tracetool-y)
$(call quiet-command,$(TRACETOOL) \
--group=all \
--format=log-stap \
--backends=$(TRACE_BACKENDS) \
--probe-prefix=qemu.$(TARGET_TYPE).$(TARGET_NAME) \
$< > $@,"GEN","$(TARGET_DIR)$(QEMU_PROG)-log.stp")
else
stap:
endif
@@ -103,23 +89,18 @@ all: $(PROGS) stap
# Dummy command so that make thinks it has done something
@true
obj-y += trace/
#########################################################
# cpu emulator library
obj-y += exec.o exec-vary.o
obj-y += exec.o
obj-y += accel/
obj-$(CONFIG_TCG) += tcg/tcg.o tcg/tcg-op.o tcg/tcg-op-vec.o tcg/tcg-op-gvec.o
obj-$(CONFIG_TCG) += tcg/tcg-common.o tcg/optimize.o
obj-$(CONFIG_TCG_INTERPRETER) += tcg/tci.o
obj-$(CONFIG_TCG_INTERPRETER) += disas/tci.o
obj-$(CONFIG_TCG) += fpu/softfloat.o
obj-y += fpu/softfloat.o
obj-y += target/$(TARGET_BASE_ARCH)/
obj-y += disas.o
obj-$(call notempty,$(TARGET_XML_FILES)) += gdbstub-xml.o
LIBS := $(libs_cpu) $(LIBS)
obj-$(CONFIG_PLUGIN) += plugins/
#########################################################
# Linux user emulator target
@@ -128,8 +109,7 @@ ifdef CONFIG_LINUX_USER
QEMU_CFLAGS+=-I$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR) \
-I$(SRC_PATH)/linux-user/host/$(ARCH) \
-I$(SRC_PATH)/linux-user \
-Ilinux-user/$(TARGET_ABI_DIR)
-I$(SRC_PATH)/linux-user
obj-y += linux-user/
obj-y += gdbstub.o thunk.o
@@ -152,16 +132,13 @@ endif #CONFIG_BSD_USER
#########################################################
# System emulator target
ifdef CONFIG_SOFTMMU
obj-y += arch_init.o cpus.o gdbstub.o balloon.o ioport.o
obj-y += arch_init.o cpus.o monitor.o gdbstub.o balloon.o ioport.o numa.o
obj-y += qtest.o
obj-y += dump/
obj-y += hw/
obj-y += monitor/
obj-y += qapi/
obj-y += memory.o
obj-y += memory_mapping.o
obj-y += dump.o
obj-y += migration/ram.o
obj-y += softmmu/
LIBS := $(libs_softmmu) $(LIBS)
# Hardware support
@@ -171,40 +148,48 @@ else
obj-y += hw/$(TARGET_BASE_ARCH)/
endif
generated-files-y += hmp-commands.h hmp-commands-info.h
generated-files-y += config-devices.h
GENERATED_FILES += hmp-commands.h hmp-commands-info.h
endif # CONFIG_SOFTMMU
# Workaround for http://gcc.gnu.org/PR55489, see configure.
%/translate.o: QEMU_CFLAGS += $(TRANSLATE_OPT_CFLAGS)
dummy := $(call unnest-vars,,obj-y)
all-obj-y := $(obj-y)
target-obj-y :=
block-obj-y :=
common-obj-y :=
chardev-obj-y :=
include $(SRC_PATH)/Makefile.objs
dummy := $(call unnest-vars,,target-obj-y)
target-obj-y-save := $(target-obj-y)
dummy := $(call unnest-vars,.., \
authz-obj-y \
block-obj-y \
block-obj-m \
chardev-obj-y \
crypto-obj-y \
crypto-aes-obj-y \
qom-obj-y \
io-obj-y \
common-obj-y \
common-obj-m)
target-obj-y := $(target-obj-y-save)
all-obj-y += $(common-obj-y)
all-obj-y += $(target-obj-y)
all-obj-y += $(qom-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(authz-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(block-obj-y) $(chardev-obj-y)
all-obj-$(CONFIG_USER_ONLY) += $(crypto-aes-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(crypto-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(io-obj-y)
ifdef CONFIG_SOFTMMU
$(QEMU_PROG_BUILD): config-devices.mak
endif
COMMON_LDADDS = ../libqemuutil.a
# build either PROG or PROGW
$(QEMU_PROG_BUILD): $(all-obj-y) $(COMMON_LDADDS) $(softmmu-main-y)
$(QEMU_PROG_BUILD): $(all-obj-y) $(COMMON_LDADDS)
$(call LINK, $(filter-out %.mak, $^))
ifdef CONFIG_DARWIN
$(call quiet-command,Rez -append $(SRC_PATH)/pc-bios/qemu.rsrc -o $@,"REZ","$(TARGET_DIR)$@")
@@ -224,27 +209,10 @@ clean: clean-target
rm -f *.a *~ $(PROGS)
rm -f $(shell find . -name '*.[od]')
rm -f hmp-commands.h gdbstub-xml.c
rm -f trace/generated-helpers.c trace/generated-helpers.c-timestamp
ifdef CONFIG_TRACE_SYSTEMTAP
rm -f *.stp
endif
ifdef CONFIG_FUZZ
include $(SRC_PATH)/tests/qtest/fuzz/Makefile.include
include $(SRC_PATH)/tests/qtest/Makefile.include
fuzz: fuzz-vars
fuzz-vars: QEMU_CFLAGS := $(FUZZ_CFLAGS) $(QEMU_CFLAGS)
fuzz-vars: QEMU_LDFLAGS := $(FUZZ_LDFLAGS) $(QEMU_LDFLAGS)
fuzz-vars: $(QEMU_PROG_FUZZ)
dummy := $(call unnest-vars,, fuzz-obj-y)
$(QEMU_PROG_FUZZ): config-devices.mak $(all-obj-y) $(COMMON_LDADDS) $(fuzz-obj-y)
$(call LINK, $(filter-out %.mak, $^))
endif
install: all
ifneq ($(PROGS),)
$(call install-prog,$(PROGS),$(DESTDIR)$(bindir))
@@ -253,24 +221,7 @@ ifdef CONFIG_TRACE_SYSTEMTAP
$(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset"
$(INSTALL_DATA) $(QEMU_PROG).stp-installed "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset/$(QEMU_PROG).stp"
$(INSTALL_DATA) $(QEMU_PROG)-simpletrace.stp "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset/$(QEMU_PROG)-simpletrace.stp"
$(INSTALL_DATA) $(QEMU_PROG)-log.stp "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset/$(QEMU_PROG)-log.stp"
endif
generated-files-y += config-target.h
Makefile: $(generated-files-y)
# Reports/Analysis
#
# The target specific coverage report only cares about target specific
# blobs and not the shared code.
#
%/coverage-report.html:
@mkdir -p $*
$(call quiet-command,\
gcovr -r $(SRC_PATH) --object-directory $(CURDIR) \
-p --html --html-details -o $@, \
"GEN", "coverage-report.html")
.PHONY: coverage-report
coverage-report: $(CURDIR)/reports/coverage/coverage-report.html
GENERATED_FILES += config-target.h
Makefile: $(GENERATED_FILES)
+139
View File
@@ -0,0 +1,139 @@
QEMU README
===========
QEMU is a generic and open source machine & userspace emulator and
virtualizer.
QEMU is capable of emulating a complete machine in software without any
need for hardware virtualization support. By using dynamic translation,
it achieves very good performance. QEMU can also integrate with the Xen
and KVM hypervisors to provide emulated hardware while allowing the
hypervisor to manage the CPU. With hypervisor support, QEMU can achieve
near native performance for CPUs. When QEMU emulates CPUs directly it is
capable of running operating systems made for one machine (e.g. an ARMv7
board) on a different machine (e.g. an x86_64 PC board).
QEMU is also capable of providing userspace API virtualization for Linux
and BSD kernel interfaces. This allows binaries compiled against one
architecture ABI (e.g. the Linux PPC64 ABI) to be run on a host using a
different architecture ABI (e.g. the Linux x86_64 ABI). This does not
involve any hardware emulation, simply CPU and syscall emulation.
QEMU aims to fit into a variety of use cases. It can be invoked directly
by users wishing to have full control over its behaviour and settings.
It also aims to facilitate integration into higher level management
layers, by providing a stable command line interface and monitor API.
It is commonly invoked indirectly via the libvirt library when using
open source applications such as oVirt, OpenStack and virt-manager.
QEMU as a whole is released under the GNU General Public License,
version 2. For full licensing details, consult the LICENSE file.
Building
========
QEMU is multi-platform software intended to be buildable on all modern
Linux platforms, OS-X, Win32 (via the Mingw64 toolchain) and a variety
of other UNIX targets. The simple steps to build QEMU are:
mkdir build
cd build
../configure
make
Additional information can also be found online via the QEMU website:
https://qemu.org/Hosts/Linux
https://qemu.org/Hosts/Mac
https://qemu.org/Hosts/W32
Submitting patches
==================
The QEMU source code is maintained under the GIT version control system.
git clone git://git.qemu.org/qemu.git
When submitting patches, one common approach is to use 'git
format-patch' and/or 'git send-email' to format & send the mail to the
qemu-devel@nongnu.org mailing list. All patches submitted must contain
a 'Signed-off-by' line from the author. Patches should follow the
guidelines set out in the HACKING and CODING_STYLE files.
Additional information on submitting patches can be found online via
the QEMU website
https://qemu.org/Contribute/SubmitAPatch
https://qemu.org/Contribute/TrivialPatches
The QEMU website is also maintained under source control.
git clone git://git.qemu.org/qemu-web.git
https://www.qemu.org/2017/02/04/the-new-qemu-website-is-up/
A 'git-publish' utility was created to make above process less
cumbersome, and is highly recommended for making regular contributions,
or even just for sending consecutive patch series revisions. It also
requires a working 'git send-email' setup, and by default doesn't
automate everything, so you may want to go through the above steps
manually for once.
For installation instructions, please go to
https://github.com/stefanha/git-publish
The workflow with 'git-publish' is:
$ git checkout master -b my-feature
$ # work on new commits, add your 'Signed-off-by' lines to each
$ git publish
Your patch series will be sent and tagged as my-feature-v1 if you need to refer
back to it in the future.
Sending v2:
$ git checkout my-feature # same topic branch
$ # making changes to the commits (using 'git rebase', for example)
$ git publish
Your patch series will be sent with 'v2' tag in the subject and the git tip
will be tagged as my-feature-v2.
Bug reporting
=============
The QEMU project uses Launchpad as its primary upstream bug tracker. Bugs
found when running code built from QEMU git or upstream released sources
should be reported via:
https://bugs.launchpad.net/qemu/
If using QEMU via an operating system vendor pre-built binary package, it
is preferable to report bugs to the vendor's own bug tracker first. If
the bug is also known to affect latest upstream code, it can also be
reported via launchpad.
For additional information on bug reporting consult:
https://qemu.org/Contribute/ReportABug
Contact
=======
The QEMU community can be contacted in a number of ways, with the two
main methods being email and IRC
- qemu-devel@nongnu.org
https://lists.nongnu.org/mailman/listinfo/qemu-devel
- #qemu on irc.oftc.net
Information on additional methods of contacting the community can be
found online via the QEMU website:
https://qemu.org/Contribute/StartHere
-- End
-150
View File
@@ -1,150 +0,0 @@
===========
QEMU README
===========
QEMU is a generic and open source machine & userspace emulator and
virtualizer.
QEMU is capable of emulating a complete machine in software without any
need for hardware virtualization support. By using dynamic translation,
it achieves very good performance. QEMU can also integrate with the Xen
and KVM hypervisors to provide emulated hardware while allowing the
hypervisor to manage the CPU. With hypervisor support, QEMU can achieve
near native performance for CPUs. When QEMU emulates CPUs directly it is
capable of running operating systems made for one machine (e.g. an ARMv7
board) on a different machine (e.g. an x86_64 PC board).
QEMU is also capable of providing userspace API virtualization for Linux
and BSD kernel interfaces. This allows binaries compiled against one
architecture ABI (e.g. the Linux PPC64 ABI) to be run on a host using a
different architecture ABI (e.g. the Linux x86_64 ABI). This does not
involve any hardware emulation, simply CPU and syscall emulation.
QEMU aims to fit into a variety of use cases. It can be invoked directly
by users wishing to have full control over its behaviour and settings.
It also aims to facilitate integration into higher level management
layers, by providing a stable command line interface and monitor API.
It is commonly invoked indirectly via the libvirt library when using
open source applications such as oVirt, OpenStack and virt-manager.
QEMU as a whole is released under the GNU General Public License,
version 2. For full licensing details, consult the LICENSE file.
Building
========
QEMU is multi-platform software intended to be buildable on all modern
Linux platforms, OS-X, Win32 (via the Mingw64 toolchain) and a variety
of other UNIX targets. The simple steps to build QEMU are:
.. code-block:: shell
mkdir build
cd build
../configure
make
Additional information can also be found online via the QEMU website:
* `<https://qemu.org/Hosts/Linux>`_
* `<https://qemu.org/Hosts/Mac>`_
* `<https://qemu.org/Hosts/W32>`_
Submitting patches
==================
The QEMU source code is maintained under the GIT version control system.
.. code-block:: shell
git clone https://git.qemu.org/git/qemu.git
When submitting patches, one common approach is to use 'git
format-patch' and/or 'git send-email' to format & send the mail to the
qemu-devel@nongnu.org mailing list. All patches submitted must contain
a 'Signed-off-by' line from the author. Patches should follow the
guidelines set out in the CODING_STYLE.rst file.
Additional information on submitting patches can be found online via
the QEMU website
* `<https://qemu.org/Contribute/SubmitAPatch>`_
* `<https://qemu.org/Contribute/TrivialPatches>`_
The QEMU website is also maintained under source control.
.. code-block:: shell
git clone https://git.qemu.org/git/qemu-web.git
* `<https://www.qemu.org/2017/02/04/the-new-qemu-website-is-up/>`_
A 'git-publish' utility was created to make above process less
cumbersome, and is highly recommended for making regular contributions,
or even just for sending consecutive patch series revisions. It also
requires a working 'git send-email' setup, and by default doesn't
automate everything, so you may want to go through the above steps
manually for once.
For installation instructions, please go to
* `<https://github.com/stefanha/git-publish>`_
The workflow with 'git-publish' is:
.. code-block:: shell
$ git checkout master -b my-feature
$ # work on new commits, add your 'Signed-off-by' lines to each
$ git publish
Your patch series will be sent and tagged as my-feature-v1 if you need to refer
back to it in the future.
Sending v2:
.. code-block:: shell
$ git checkout my-feature # same topic branch
$ # making changes to the commits (using 'git rebase', for example)
$ git publish
Your patch series will be sent with 'v2' tag in the subject and the git tip
will be tagged as my-feature-v2.
Bug reporting
=============
The QEMU project uses Launchpad as its primary upstream bug tracker. Bugs
found when running code built from QEMU git or upstream released sources
should be reported via:
* `<https://bugs.launchpad.net/qemu/>`_
If using QEMU via an operating system vendor pre-built binary package, it
is preferable to report bugs to the vendor's own bug tracker first. If
the bug is also known to affect latest upstream code, it can also be
reported via launchpad.
For additional information on bug reporting consult:
* `<https://qemu.org/Contribute/ReportABug>`_
Contact
=======
The QEMU community can be contacted in a number of ways, with the two
main methods being email and IRC
* `<mailto:qemu-devel@nongnu.org>`_
* `<https://lists.nongnu.org/mailman/listinfo/qemu-devel>`_
* #qemu on irc.oftc.net
Information on additional methods of contacting the community can be
found online via the QEMU website:
* `<https://qemu.org/Contribute/StartHere>`_
+1 -1
View File
@@ -1 +1 @@
5.0.1
2.12.1
+1 -2
View File
@@ -1,5 +1,4 @@
common-obj-$(CONFIG_SOFTMMU) += accel.o
obj-$(call land,$(CONFIG_SOFTMMU),$(CONFIG_POSIX)) += qtest.o
obj-$(CONFIG_SOFTMMU) += accel.o
obj-$(CONFIG_KVM) += kvm/
obj-$(CONFIG_TCG) += tcg/
obj-y += stubs/
+62 -13
View File
@@ -28,7 +28,12 @@
#include "hw/boards.h"
#include "sysemu/arch_init.h"
#include "sysemu/sysemu.h"
#include "sysemu/kvm.h"
#include "sysemu/qtest.h"
#include "hw/xen/xen.h"
#include "qom/object.h"
#include "qemu/error-report.h"
#include "qemu/option.h"
static const TypeInfo accel_type = {
.name = TYPE_ACCEL,
@@ -38,7 +43,7 @@ static const TypeInfo accel_type = {
};
/* Lookup AccelClass from opt_name. Returns NULL if not found */
AccelClass *accel_find(const char *opt_name)
static AccelClass *accel_find(const char *opt_name)
{
char *class_name = g_strdup_printf(ACCEL_CLASS_NAME("%s"), opt_name);
AccelClass *ac = ACCEL_CLASS(object_class_by_name(class_name));
@@ -46,9 +51,11 @@ AccelClass *accel_find(const char *opt_name)
return ac;
}
int accel_init_machine(AccelState *accel, MachineState *ms)
static int accel_init_machine(AccelClass *acc, MachineState *ms)
{
AccelClass *acc = ACCEL_GET_CLASS(accel);
ObjectClass *oc = OBJECT_CLASS(acc);
const char *cname = object_class_get_name(oc);
AccelState *accel = ACCEL(object_new(cname));
int ret;
ms->accelerator = accel;
*(acc->allowed) = true;
@@ -57,24 +64,66 @@ int accel_init_machine(AccelState *accel, MachineState *ms)
ms->accelerator = NULL;
*(acc->allowed) = false;
object_unref(OBJECT(accel));
} else {
object_set_accelerator_compat_props(acc->compat_props);
}
return ret;
}
AccelState *current_accel(void)
void configure_accelerator(MachineState *ms)
{
return current_machine->accelerator;
const char *accel, *p;
char buf[10];
int ret;
bool accel_initialised = false;
bool init_failed = false;
AccelClass *acc = NULL;
accel = qemu_opt_get(qemu_get_machine_opts(), "accel");
if (accel == NULL) {
/* Use the default "accelerator", tcg */
accel = "tcg";
}
p = accel;
while (!accel_initialised && *p != '\0') {
if (*p == ':') {
p++;
}
p = get_opt_name(buf, sizeof(buf), p, ':');
acc = accel_find(buf);
if (!acc) {
continue;
}
if (acc->available && !acc->available()) {
printf("%s not supported for this target\n",
acc->name);
continue;
}
ret = accel_init_machine(acc, ms);
if (ret < 0) {
init_failed = true;
error_report("failed to initialize %s: %s",
acc->name, strerror(-ret));
} else {
accel_initialised = true;
}
}
if (!accel_initialised) {
if (!init_failed) {
error_report("-machine accel=%s: No accelerator found", accel);
}
exit(1);
}
if (init_failed) {
error_report("Back to %s accelerator", acc->name);
}
}
void accel_setup_post(MachineState *ms)
void accel_register_compat_props(AccelState *accel)
{
AccelState *accel = ms->accelerator;
AccelClass *acc = ACCEL_GET_CLASS(accel);
if (acc->setup_post) {
acc->setup_post(ms, accel);
}
AccelClass *class = ACCEL_GET_CLASS(accel);
register_compat_props_array(class->global_props);
}
static void register_accel_types(void)
+103 -644
View File
File diff suppressed because it is too large. Load diff
+1 -4
View File
@@ -1,4 +1,4 @@
# See docs/devel/tracing.txt for syntax documentation.
# Trace events for debugging and performance instrumentation
# kvm-all.c
kvm_ioctl(int type, void *arg) "type 0x%x, arg %p"
@@ -12,8 +12,5 @@ kvm_irqchip_commit_routes(void) ""
kvm_irqchip_add_msi_route(char *name, int vector, int virq) "dev %s vector %d virq %d"
kvm_irqchip_update_msi_route(int virq) "Updating MSI route virq=%d"
kvm_irqchip_release_virq(int virq) "virq %d"
kvm_set_ioeventfd_mmio(int fd, uint64_t addr, uint32_t val, bool assign, uint32_t size, bool datamatch) "fd: %d @0x%" PRIx64 " val=0x%x assign: %d size: %d match: %d"
kvm_set_ioeventfd_pio(int fd, uint16_t addr, uint32_t val, bool assign, uint32_t size, bool datamatch) "fd: %d @0x%x val=0x%x assign: %d size: %d match: %d"
kvm_set_user_memory(uint32_t slot, uint32_t flags, uint64_t guest_phys_addr, uint64_t memory_size, uint64_t userspace_addr, int ret) "Slot#%d flags=0x%x gpa=0x%"PRIx64 " size=0x%"PRIx64 " ua=0x%"PRIx64 " ret=%d"
kvm_clear_dirty_log(uint32_t slot, uint64_t start, uint32_t size) "slot#%"PRId32" start 0x%"PRIx64" size 0x%"PRIx32
-54
View File
@@ -1,54 +0,0 @@
/*
* QTest accelerator code
*
* Copyright IBM, Corp. 2011
*
* Authors:
* Anthony Liguori <aliguori@us.ibm.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "qemu/module.h"
#include "qemu/option.h"
#include "qemu/config-file.h"
#include "sysemu/accel.h"
#include "sysemu/qtest.h"
#include "sysemu/cpus.h"
static int qtest_init_accel(MachineState *ms)
{
QemuOpts *opts = qemu_opts_create(qemu_find_opts("icount"), NULL, 0,
&error_abort);
qemu_opt_set(opts, "shift", "0", &error_abort);
configure_icount(opts, &error_abort);
qemu_opts_del(opts);
return 0;
}
static void qtest_accel_class_init(ObjectClass *oc, void *data)
{
AccelClass *ac = ACCEL_CLASS(oc);
ac->name = "QTest";
ac->init_machine = qtest_init_accel;
ac->allowed = &qtest_allowed;
}
#define TYPE_QTEST_ACCEL ACCEL_CLASS_NAME("qtest")
static const TypeInfo qtest_accel_type = {
.name = TYPE_QTEST_ACCEL,
.parent = TYPE_ACCEL,
.class_init = qtest_accel_class_init,
};
static void qtest_type_init(void)
{
type_register_static(&qtest_accel_type);
}
type_init(qtest_type_init);
+1
View File
@@ -14,6 +14,7 @@
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "cpu.h"
#include "sysemu/hax.h"
+1
View File
@@ -12,6 +12,7 @@
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "cpu.h"
#include "sysemu/hvf.h"
+1 -12
View File
@@ -11,6 +11,7 @@
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "cpu.h"
#include "sysemu/kvm.h"
@@ -138,18 +139,6 @@ void kvm_irqchip_commit_routes(KVMState *s)
{
}
void kvm_irqchip_add_change_notifier(Notifier *n)
{
}
void kvm_irqchip_remove_change_notifier(Notifier *n)
{
}
void kvm_irqchip_change_notify(void)
{
}
int kvm_irqchip_add_adapter_route(KVMState *s, AdapterInfo *adapter)
{
return -ENOSYS;
+6
View File
@@ -11,14 +11,20 @@
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "cpu.h"
#include "tcg/tcg.h"
#include "exec/cpu-common.h"
#include "exec/exec-all.h"
void tb_flush(CPUState *cpu)
{
}
void tb_unlock(void)
{
}
void tlb_set_dirty(CPUState *cpu, target_ulong vaddr)
{
}
+1
View File
@@ -9,6 +9,7 @@
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "cpu.h"
#include "sysemu/whpx.h"
-1
View File
@@ -6,4 +6,3 @@ obj-y += translator.o
obj-$(CONFIG_USER_ONLY) += user-exec.o
obj-$(call lnot,$(CONFIG_SOFTMMU)) += user-exec-stub.o
obj-$(CONFIG_PLUGIN) += plugin-gen.o
-54
View File
@@ -1,54 +0,0 @@
/*
* Common Atomic Helper Functions
*
* This file should be included before the various instantiations of
* the atomic_template.h helpers.
*
* Copyright (c) 2019 Linaro
* Written by Alex Bennée <alex.bennee@linaro.org>
*
* SPDX-License-Identifier: GPL-2.0-or-later
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
static inline
void atomic_trace_rmw_pre(CPUArchState *env, target_ulong addr, uint16_t info)
{
CPUState *cpu = env_cpu(env);
trace_guest_mem_before_exec(cpu, addr, info);
trace_guest_mem_before_exec(cpu, addr, info | TRACE_MEM_ST);
}
static inline void
atomic_trace_rmw_post(CPUArchState *env, target_ulong addr, uint16_t info)
{
qemu_plugin_vcpu_mem_cb(env_cpu(env), addr, info);
qemu_plugin_vcpu_mem_cb(env_cpu(env), addr, info | TRACE_MEM_ST);
}
static inline
void atomic_trace_ld_pre(CPUArchState *env, target_ulong addr, uint16_t info)
{
trace_guest_mem_before_exec(env_cpu(env), addr, info);
}
static inline
void atomic_trace_ld_post(CPUArchState *env, target_ulong addr, uint16_t info)
{
qemu_plugin_vcpu_mem_cb(env_cpu(env), addr, info);
}
static inline
void atomic_trace_st_pre(CPUArchState *env, target_ulong addr, uint16_t info)
{
trace_guest_mem_before_exec(env_cpu(env), addr, info);
}
static inline
void atomic_trace_st_post(CPUArchState *env, target_ulong addr, uint16_t info)
{
qemu_plugin_vcpu_mem_cb(env_cpu(env), addr, info);
}
+51 -177
View File
@@ -7,7 +7,7 @@
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -18,38 +18,26 @@
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/plugin.h"
#include "trace/mem.h"
#if DATA_SIZE == 16
# define SUFFIX o
# define DATA_TYPE Int128
# define BSWAP bswap128
# define SHIFT 4
#elif DATA_SIZE == 8
# define SUFFIX q
# define DATA_TYPE uint64_t
# define SDATA_TYPE int64_t
# define BSWAP bswap64
# define SHIFT 3
#elif DATA_SIZE == 4
# define SUFFIX l
# define DATA_TYPE uint32_t
# define SDATA_TYPE int32_t
# define BSWAP bswap32
# define SHIFT 2
#elif DATA_SIZE == 2
# define SUFFIX w
# define DATA_TYPE uint16_t
# define SDATA_TYPE int16_t
# define BSWAP bswap16
# define SHIFT 1
#elif DATA_SIZE == 1
# define SUFFIX b
# define DATA_TYPE uint8_t
# define SDATA_TYPE int8_t
# define BSWAP
# define SHIFT 0
#else
# error unsupported data size
#endif
@@ -75,34 +63,18 @@ ABI_TYPE ATOMIC_NAME(cmpxchg)(CPUArchState *env, target_ulong addr,
{
ATOMIC_MMU_DECLS;
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP;
DATA_TYPE ret;
uint16_t info = trace_mem_build_info(SHIFT, false, 0, false,
ATOMIC_MMU_IDX);
atomic_trace_rmw_pre(env, addr, info);
#if DATA_SIZE == 16
ret = atomic16_cmpxchg(haddr, cmpv, newv);
#else
ret = atomic_cmpxchg__nocheck(haddr, cmpv, newv);
#endif
DATA_TYPE ret = atomic_cmpxchg__nocheck(haddr, cmpv, newv);
ATOMIC_MMU_CLEANUP;
atomic_trace_rmw_post(env, addr, info);
return ret;
}
#if DATA_SIZE >= 16
#if HAVE_ATOMIC128
ABI_TYPE ATOMIC_NAME(ld)(CPUArchState *env, target_ulong addr EXTRA_ARGS)
{
ATOMIC_MMU_DECLS;
DATA_TYPE val, *haddr = ATOMIC_MMU_LOOKUP;
uint16_t info = trace_mem_build_info(SHIFT, false, 0, false,
ATOMIC_MMU_IDX);
atomic_trace_ld_pre(env, addr, info);
val = atomic16_read(haddr);
__atomic_load(haddr, &val, __ATOMIC_RELAXED);
ATOMIC_MMU_CLEANUP;
atomic_trace_ld_post(env, addr, info);
return val;
}
@@ -111,45 +83,28 @@ void ATOMIC_NAME(st)(CPUArchState *env, target_ulong addr,
{
ATOMIC_MMU_DECLS;
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP;
uint16_t info = trace_mem_build_info(SHIFT, false, 0, true,
ATOMIC_MMU_IDX);
atomic_trace_st_pre(env, addr, info);
atomic16_set(haddr, val);
__atomic_store(haddr, &val, __ATOMIC_RELAXED);
ATOMIC_MMU_CLEANUP;
atomic_trace_st_post(env, addr, info);
}
#endif
#else
ABI_TYPE ATOMIC_NAME(xchg)(CPUArchState *env, target_ulong addr,
ABI_TYPE val EXTRA_ARGS)
{
ATOMIC_MMU_DECLS;
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP;
DATA_TYPE ret;
uint16_t info = trace_mem_build_info(SHIFT, false, 0, false,
ATOMIC_MMU_IDX);
atomic_trace_rmw_pre(env, addr, info);
ret = atomic_xchg__nocheck(haddr, val);
DATA_TYPE ret = atomic_xchg__nocheck(haddr, val);
ATOMIC_MMU_CLEANUP;
atomic_trace_rmw_post(env, addr, info);
return ret;
}
#define GEN_ATOMIC_HELPER(X) \
ABI_TYPE ATOMIC_NAME(X)(CPUArchState *env, target_ulong addr, \
ABI_TYPE val EXTRA_ARGS) \
ABI_TYPE val EXTRA_ARGS) \
{ \
ATOMIC_MMU_DECLS; \
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP; \
DATA_TYPE ret; \
uint16_t info = trace_mem_build_info(SHIFT, false, 0, false, \
ATOMIC_MMU_IDX); \
atomic_trace_rmw_pre(env, addr, info); \
ret = atomic_##X(haddr, val); \
DATA_TYPE ret = atomic_##X(haddr, val); \
ATOMIC_MMU_CLEANUP; \
atomic_trace_rmw_post(env, addr, info); \
return ret; \
}
@@ -163,46 +118,6 @@ GEN_ATOMIC_HELPER(or_fetch)
GEN_ATOMIC_HELPER(xor_fetch)
#undef GEN_ATOMIC_HELPER
/* These helpers are, as a whole, full barriers. Within the helper,
* the leading barrier is explicit and the trailing barrier is within
* cmpxchg primitive.
*
* Trace this load + RMW loop as a single RMW op. This way, regardless
* of CF_PARALLEL's value, we'll trace just a read and a write.
*/
#define GEN_ATOMIC_HELPER_FN(X, FN, XDATA_TYPE, RET) \
ABI_TYPE ATOMIC_NAME(X)(CPUArchState *env, target_ulong addr, \
ABI_TYPE xval EXTRA_ARGS) \
{ \
ATOMIC_MMU_DECLS; \
XDATA_TYPE *haddr = ATOMIC_MMU_LOOKUP; \
XDATA_TYPE cmp, old, new, val = xval; \
uint16_t info = trace_mem_build_info(SHIFT, false, 0, false, \
ATOMIC_MMU_IDX); \
atomic_trace_rmw_pre(env, addr, info); \
smp_mb(); \
cmp = atomic_read__nocheck(haddr); \
do { \
old = cmp; new = FN(old, val); \
cmp = atomic_cmpxchg__nocheck(haddr, old, new); \
} while (cmp != old); \
ATOMIC_MMU_CLEANUP; \
atomic_trace_rmw_post(env, addr, info); \
return RET; \
}
GEN_ATOMIC_HELPER_FN(fetch_smin, MIN, SDATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(fetch_umin, MIN, DATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(fetch_smax, MAX, SDATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(fetch_umax, MAX, DATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(smin_fetch, MIN, SDATA_TYPE, new)
GEN_ATOMIC_HELPER_FN(umin_fetch, MIN, DATA_TYPE, new)
GEN_ATOMIC_HELPER_FN(smax_fetch, MAX, SDATA_TYPE, new)
GEN_ATOMIC_HELPER_FN(umax_fetch, MAX, DATA_TYPE, new)
#undef GEN_ATOMIC_HELPER_FN
#endif /* DATA SIZE >= 16 */
#undef END
@@ -222,34 +137,18 @@ ABI_TYPE ATOMIC_NAME(cmpxchg)(CPUArchState *env, target_ulong addr,
{
ATOMIC_MMU_DECLS;
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP;
DATA_TYPE ret;
uint16_t info = trace_mem_build_info(SHIFT, false, MO_BSWAP, false,
ATOMIC_MMU_IDX);
atomic_trace_rmw_pre(env, addr, info);
#if DATA_SIZE == 16
ret = atomic16_cmpxchg(haddr, BSWAP(cmpv), BSWAP(newv));
#else
ret = atomic_cmpxchg__nocheck(haddr, BSWAP(cmpv), BSWAP(newv));
#endif
DATA_TYPE ret = atomic_cmpxchg__nocheck(haddr, BSWAP(cmpv), BSWAP(newv));
ATOMIC_MMU_CLEANUP;
atomic_trace_rmw_post(env, addr, info);
return BSWAP(ret);
}
#if DATA_SIZE >= 16
#if HAVE_ATOMIC128
ABI_TYPE ATOMIC_NAME(ld)(CPUArchState *env, target_ulong addr EXTRA_ARGS)
{
ATOMIC_MMU_DECLS;
DATA_TYPE val, *haddr = ATOMIC_MMU_LOOKUP;
uint16_t info = trace_mem_build_info(SHIFT, false, MO_BSWAP, false,
ATOMIC_MMU_IDX);
atomic_trace_ld_pre(env, addr, info);
val = atomic16_read(haddr);
__atomic_load(haddr, &val, __ATOMIC_RELAXED);
ATOMIC_MMU_CLEANUP;
atomic_trace_ld_post(env, addr, info);
return BSWAP(val);
}
@@ -258,47 +157,29 @@ void ATOMIC_NAME(st)(CPUArchState *env, target_ulong addr,
{
ATOMIC_MMU_DECLS;
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP;
uint16_t info = trace_mem_build_info(SHIFT, false, MO_BSWAP, true,
ATOMIC_MMU_IDX);
val = BSWAP(val);
atomic_trace_st_pre(env, addr, info);
val = BSWAP(val);
atomic16_set(haddr, val);
__atomic_store(haddr, &val, __ATOMIC_RELAXED);
ATOMIC_MMU_CLEANUP;
atomic_trace_st_post(env, addr, info);
}
#endif
#else
ABI_TYPE ATOMIC_NAME(xchg)(CPUArchState *env, target_ulong addr,
ABI_TYPE val EXTRA_ARGS)
{
ATOMIC_MMU_DECLS;
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP;
ABI_TYPE ret;
uint16_t info = trace_mem_build_info(SHIFT, false, MO_BSWAP, false,
ATOMIC_MMU_IDX);
atomic_trace_rmw_pre(env, addr, info);
ret = atomic_xchg__nocheck(haddr, BSWAP(val));
ABI_TYPE ret = atomic_xchg__nocheck(haddr, BSWAP(val));
ATOMIC_MMU_CLEANUP;
atomic_trace_rmw_post(env, addr, info);
return BSWAP(ret);
}
#define GEN_ATOMIC_HELPER(X) \
ABI_TYPE ATOMIC_NAME(X)(CPUArchState *env, target_ulong addr, \
ABI_TYPE val EXTRA_ARGS) \
ABI_TYPE val EXTRA_ARGS) \
{ \
ATOMIC_MMU_DECLS; \
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP; \
DATA_TYPE ret; \
uint16_t info = trace_mem_build_info(SHIFT, false, MO_BSWAP, \
false, ATOMIC_MMU_IDX); \
atomic_trace_rmw_pre(env, addr, info); \
ret = atomic_##X(haddr, BSWAP(val)); \
DATA_TYPE ret = atomic_##X(haddr, BSWAP(val)); \
ATOMIC_MMU_CLEANUP; \
atomic_trace_rmw_post(env, addr, info); \
return BSWAP(ret); \
}
@@ -311,52 +192,47 @@ GEN_ATOMIC_HELPER(xor_fetch)
#undef GEN_ATOMIC_HELPER
/* These helpers are, as a whole, full barriers. Within the helper,
* the leading barrier is explicit and the trailing barrier is within
* cmpxchg primitive.
*
* Trace this load + RMW loop as a single RMW op. This way, regardless
* of CF_PARALLEL's value, we'll trace just a read and a write.
*/
#define GEN_ATOMIC_HELPER_FN(X, FN, XDATA_TYPE, RET) \
ABI_TYPE ATOMIC_NAME(X)(CPUArchState *env, target_ulong addr, \
ABI_TYPE xval EXTRA_ARGS) \
{ \
ATOMIC_MMU_DECLS; \
XDATA_TYPE *haddr = ATOMIC_MMU_LOOKUP; \
XDATA_TYPE ldo, ldn, old, new, val = xval; \
uint16_t info = trace_mem_build_info(SHIFT, false, MO_BSWAP, \
false, ATOMIC_MMU_IDX); \
atomic_trace_rmw_pre(env, addr, info); \
smp_mb(); \
ldn = atomic_read__nocheck(haddr); \
do { \
ldo = ldn; old = BSWAP(ldo); new = FN(old, val); \
ldn = atomic_cmpxchg__nocheck(haddr, ldo, BSWAP(new)); \
} while (ldo != ldn); \
ATOMIC_MMU_CLEANUP; \
atomic_trace_rmw_post(env, addr, info); \
return RET; \
}
GEN_ATOMIC_HELPER_FN(fetch_smin, MIN, SDATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(fetch_umin, MIN, DATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(fetch_smax, MAX, SDATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(fetch_umax, MAX, DATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(smin_fetch, MIN, SDATA_TYPE, new)
GEN_ATOMIC_HELPER_FN(umin_fetch, MIN, DATA_TYPE, new)
GEN_ATOMIC_HELPER_FN(smax_fetch, MAX, SDATA_TYPE, new)
GEN_ATOMIC_HELPER_FN(umax_fetch, MAX, DATA_TYPE, new)
/* Note that for addition, we need to use a separate cmpxchg loop instead
of bswaps for the reverse-host-endian helpers. */
#define ADD(X, Y) (X + Y)
GEN_ATOMIC_HELPER_FN(fetch_add, ADD, DATA_TYPE, old)
GEN_ATOMIC_HELPER_FN(add_fetch, ADD, DATA_TYPE, new)
#undef ADD
ABI_TYPE ATOMIC_NAME(fetch_add)(CPUArchState *env, target_ulong addr,
ABI_TYPE val EXTRA_ARGS)
{
ATOMIC_MMU_DECLS;
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP;
DATA_TYPE ldo, ldn, ret, sto;
#undef GEN_ATOMIC_HELPER_FN
ldo = atomic_read__nocheck(haddr);
while (1) {
ret = BSWAP(ldo);
sto = BSWAP(ret + val);
ldn = atomic_cmpxchg__nocheck(haddr, ldo, sto);
if (ldn == ldo) {
ATOMIC_MMU_CLEANUP;
return ret;
}
ldo = ldn;
}
}
ABI_TYPE ATOMIC_NAME(add_fetch)(CPUArchState *env, target_ulong addr,
ABI_TYPE val EXTRA_ARGS)
{
ATOMIC_MMU_DECLS;
DATA_TYPE *haddr = ATOMIC_MMU_LOOKUP;
DATA_TYPE ldo, ldn, ret, sto;
ldo = atomic_read__nocheck(haddr);
while (1) {
ret = BSWAP(ldo) + val;
sto = BSWAP(ret);
ldn = atomic_cmpxchg__nocheck(haddr, ldo, sto);
if (ldn == ldo) {
ATOMIC_MMU_CLEANUP;
return ret;
}
ldo = ldn;
}
}
#endif /* DATA_SIZE >= 16 */
#undef END
@@ -365,7 +241,5 @@ GEN_ATOMIC_HELPER_FN(add_fetch, ADD, DATA_TYPE, new)
#undef BSWAP
#undef ABI_TYPE
#undef DATA_TYPE
#undef SDATA_TYPE
#undef SUFFIX
#undef DATA_SIZE
#undef SHIFT
+1 -2
View File
@@ -6,7 +6,7 @@
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -20,7 +20,6 @@
#include "qemu/osdep.h"
#include "cpu.h"
#include "sysemu/cpus.h"
#include "sysemu/tcg.h"
#include "exec/exec-all.h"
bool tcg_allowed;
+89 -87
View File
@@ -6,7 +6,7 @@
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -16,17 +16,16 @@
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "cpu.h"
#include "trace.h"
#include "disas/disas.h"
#include "exec/exec-all.h"
#include "tcg/tcg.h"
#include "tcg.h"
#include "qemu/atomic.h"
#include "sysemu/qtest.h"
#include "qemu/timer.h"
#include "exec/address-spaces.h"
#include "qemu/rcu.h"
#include "exec/tb-hash.h"
#include "exec/tb-lookup.h"
@@ -56,7 +55,7 @@ typedef struct SyncClocks {
#define MAX_DELAY_PRINT_RATE 2000000000LL
#define MAX_NB_PRINTS 100
static void align_clocks(SyncClocks *sc, CPUState *cpu)
static void align_clocks(SyncClocks *sc, const CPUState *cpu)
{
int64_t cpu_icount;
@@ -64,7 +63,7 @@ static void align_clocks(SyncClocks *sc, CPUState *cpu)
return;
}
cpu_icount = cpu->icount_extra + cpu_neg(cpu)->icount_decr.u16.low;
cpu_icount = cpu->icount_extra + cpu->icount_decr.u16.low;
sc->diff_clk += cpu_icount_to_ns(sc->last_cpu_icount - cpu_icount);
sc->last_cpu_icount = cpu_icount;
@@ -107,15 +106,15 @@ static void print_delay(const SyncClocks *sc)
}
}
static void init_delay_params(SyncClocks *sc, CPUState *cpu)
static void init_delay_params(SyncClocks *sc,
const CPUState *cpu)
{
if (!icount_align_option) {
return;
}
sc->realtime_clock = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL_RT);
sc->diff_clk = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) - sc->realtime_clock;
sc->last_cpu_icount
= cpu->icount_extra + cpu_neg(cpu)->icount_decr.u16.low;
sc->last_cpu_icount = cpu->icount_extra + cpu->icount_decr.u16.low;
if (sc->diff_clk < max_delay) {
max_delay = sc->diff_clk;
}
@@ -156,19 +155,17 @@ static inline tcg_target_ulong cpu_tb_exec(CPUState *cpu, TranslationBlock *itb)
#if defined(DEBUG_DISAS)
if (qemu_loglevel_mask(CPU_LOG_TB_CPU)
&& qemu_log_in_addr_range(itb->pc)) {
FILE *logfile = qemu_log_lock();
int flags = 0;
if (qemu_loglevel_mask(CPU_LOG_TB_FPU)) {
flags |= CPU_DUMP_FPU;
}
qemu_log_lock();
#if defined(TARGET_I386)
flags |= CPU_DUMP_CCOP;
log_cpu_state(cpu, CPU_DUMP_CCOP);
#else
log_cpu_state(cpu, 0);
#endif
log_cpu_state(cpu, flags);
qemu_log_unlock(logfile);
qemu_log_unlock();
}
#endif /* DEBUG_DISAS */
cpu->can_do_io = !use_icount;
ret = tcg_qemu_tb_exec(env, tb_ptr);
cpu->can_do_io = 1;
last_tb = (TranslationBlock *)(ret & ~TB_EXIT_MASK);
@@ -213,20 +210,20 @@ static void cpu_exec_nocache(CPUState *cpu, int max_cycles,
We only end up here when an existing TB is too long. */
cflags |= MIN(max_cycles, CF_COUNT_MASK);
mmap_lock();
tb_lock();
tb = tb_gen_code(cpu, orig_tb->pc, orig_tb->cs_base,
orig_tb->flags, cflags);
tb->orig_tb = orig_tb;
mmap_unlock();
tb_unlock();
/* execute the generated code */
trace_exec_tb_nocache(tb, tb->pc);
cpu_tb_exec(cpu, tb);
mmap_lock();
tb_lock();
tb_phys_invalidate(tb, -1);
mmap_unlock();
tcg_tb_remove(tb);
tb_remove(tb);
tb_unlock();
}
#endif
@@ -238,48 +235,52 @@ void cpu_exec_step_atomic(CPUState *cpu)
uint32_t flags;
uint32_t cflags = 1;
uint32_t cf_mask = cflags & CF_HASH_MASK;
/* volatile because we modify it between setjmp and longjmp */
volatile bool in_exclusive_region = false;
if (sigsetjmp(cpu->jmp_env, 0) == 0) {
start_exclusive();
tb = tb_lookup__cpu_state(cpu, &pc, &cs_base, &flags, cf_mask);
if (tb == NULL) {
mmap_lock();
tb = tb_gen_code(cpu, pc, cs_base, flags, cflags);
tb_lock();
tb = tb_htable_lookup(cpu, pc, cs_base, flags, cf_mask);
if (likely(tb == NULL)) {
tb = tb_gen_code(cpu, pc, cs_base, flags, cflags);
}
tb_unlock();
mmap_unlock();
}
start_exclusive();
/* Since we got here, we know that parallel_cpus must be true. */
parallel_cpus = false;
in_exclusive_region = true;
cc->cpu_exec_enter(cpu);
/* execute the generated code */
trace_exec_tb(tb, pc);
cpu_tb_exec(cpu, tb);
cc->cpu_exec_exit(cpu);
} else {
/*
/* We may have exited due to another problem here, so we need
* to reset any tb_locks we may have taken but didn't release.
* The mmap_lock is dropped by tb_gen_code if it runs out of
* memory.
*/
#ifndef CONFIG_SOFTMMU
tcg_debug_assert(!have_mmap_lock());
#endif
if (qemu_mutex_iothread_locked()) {
qemu_mutex_unlock_iothread();
}
assert_no_pages_locked();
qemu_plugin_disable_mem_helpers(cpu);
tb_lock_reset();
}
/*
* As we start the exclusive region before codegen we must still
* be in the region if we longjump out of either the codegen or
* the execution.
*/
g_assert(cpu_in_exclusive_context(cpu));
parallel_cpus = true;
end_exclusive();
if (in_exclusive_region) {
/* We might longjump out of either the codegen or the
* execution, so must make sure we only end the exclusive
* region if we started it.
*/
parallel_cpus = true;
end_exclusive();
}
}
struct tb_desc {
@@ -292,7 +293,7 @@ struct tb_desc {
uint32_t trace_vcpu_dstate;
};
static bool tb_lookup_cmp(const void *p, const void *d)
static bool tb_cmp(const void *p, const void *d)
{
const TranslationBlock *tb = p;
const struct tb_desc *desc = d;
@@ -335,12 +336,9 @@ TranslationBlock *tb_htable_lookup(CPUState *cpu, target_ulong pc,
desc.trace_vcpu_dstate = *cpu->trace_dstate;
desc.pc = pc;
phys_pc = get_page_addr_code(desc.env, pc);
if (phys_pc == -1) {
return NULL;
}
desc.phys_page1 = phys_pc & TARGET_PAGE_MASK;
h = tb_hash_func(phys_pc, pc, flags, cf_mask, *cpu->trace_dstate);
return qht_lookup_custom(&tb_ctx.htable, &desc, h, tb_lookup_cmp);
return qht_lookup(&tb_ctx.htable, tb_cmp, &desc, h);
}
void tb_set_jmp_target(TranslationBlock *tb, int n, uintptr_t addr)
@@ -354,43 +352,28 @@ void tb_set_jmp_target(TranslationBlock *tb, int n, uintptr_t addr)
}
}
/* Called with tb_lock held. */
static inline void tb_add_jump(TranslationBlock *tb, int n,
TranslationBlock *tb_next)
{
uintptr_t old;
assert(n < ARRAY_SIZE(tb->jmp_list_next));
qemu_spin_lock(&tb_next->jmp_lock);
/* make sure the destination TB is valid */
if (tb_next->cflags & CF_INVALID) {
goto out_unlock_next;
if (tb->jmp_list_next[n]) {
/* Another thread has already done this while we were
* outside of the lock; nothing to do in this case */
return;
}
/* Atomically claim the jump destination slot only if it was NULL */
old = atomic_cmpxchg(&tb->jmp_dest[n], (uintptr_t)NULL, (uintptr_t)tb_next);
if (old) {
goto out_unlock_next;
}
/* patch the native jump address */
tb_set_jmp_target(tb, n, (uintptr_t)tb_next->tc.ptr);
/* add in TB jmp list */
tb->jmp_list_next[n] = tb_next->jmp_list_head;
tb_next->jmp_list_head = (uintptr_t)tb | n;
qemu_spin_unlock(&tb_next->jmp_lock);
qemu_log_mask_and_addr(CPU_LOG_EXEC, tb->pc,
"Linking TBs %p [" TARGET_FMT_lx
"] index %d -> %p [" TARGET_FMT_lx "]\n",
tb->tc.ptr, tb->pc, n,
tb_next->tc.ptr, tb_next->pc);
return;
out_unlock_next:
qemu_spin_unlock(&tb_next->jmp_lock);
return;
/* patch the native jump address */
tb_set_jmp_target(tb, n, (uintptr_t)tb_next->tc.ptr);
/* add in TB jmp circular list */
tb->jmp_list_next[n] = tb_next->jmp_list_first;
tb_next->jmp_list_first = (uintptr_t)tb | n;
}
static inline TranslationBlock *tb_find(CPUState *cpu,
@@ -400,11 +383,27 @@ static inline TranslationBlock *tb_find(CPUState *cpu,
TranslationBlock *tb;
target_ulong cs_base, pc;
uint32_t flags;
bool acquired_tb_lock = false;
tb = tb_lookup__cpu_state(cpu, &pc, &cs_base, &flags, cf_mask);
if (tb == NULL) {
/* mmap_lock is needed by tb_gen_code, and mmap_lock must be
* taken outside tb_lock. As system emulation is currently
* single threaded the locks are NOPs.
*/
mmap_lock();
tb = tb_gen_code(cpu, pc, cs_base, flags, cf_mask);
tb_lock();
acquired_tb_lock = true;
/* There's a chance that our desired tb has been translated while
* taking the locks so we check again inside the lock.
*/
tb = tb_htable_lookup(cpu, pc, cs_base, flags, cf_mask);
if (likely(tb == NULL)) {
/* if no translated code available, then translate it now */
tb = tb_gen_code(cpu, pc, cs_base, flags, cf_mask);
}
mmap_unlock();
/* We add the TB in the virtual pc hash table for the fast lookup */
atomic_set(&cpu->tb_jmp_cache[tb_jmp_cache_hash_func(pc)], tb);
@@ -419,8 +418,17 @@ static inline TranslationBlock *tb_find(CPUState *cpu,
}
#endif
/* See if we can patch the calling TB. */
if (last_tb) {
tb_add_jump(last_tb, tb_exit, tb);
if (last_tb && !qemu_loglevel_mask(CPU_LOG_TB_NOCHAIN)) {
if (!acquired_tb_lock) {
tb_lock();
acquired_tb_lock = true;
}
if (!(tb->cflags & CF_INVALID)) {
tb_add_jump(last_tb, tb_exit, tb);
}
}
if (acquired_tb_lock) {
tb_unlock();
}
return tb;
}
@@ -467,7 +475,7 @@ static inline bool cpu_handle_exception(CPUState *cpu, int *ret)
if (cpu->exception_index < 0) {
#ifndef CONFIG_USER_ONLY
if (replay_has_exception()
&& cpu_neg(cpu)->icount_decr.u16.low + cpu->icount_extra == 0) {
&& cpu->icount_decr.u16.low + cpu->icount_extra == 0) {
/* try to cause an exception pending in the log */
cpu_exec_nocache(cpu, 1, tb_find(cpu, NULL, 0, curr_cflags()), true);
}
@@ -525,7 +533,7 @@ static inline bool cpu_handle_interrupt(CPUState *cpu,
* Ensure zeroing happens before reading cpu->exit_request or
* cpu->interrupt_request (see also smp_wmb in cpu_exit())
*/
atomic_mb_set(&cpu_neg(cpu)->icount_decr.u16.high, 0);
atomic_mb_set(&cpu->icount_decr.u16.high, 0);
if (unlikely(atomic_read(&cpu->interrupt_request))) {
int interrupt_request;
@@ -596,9 +604,8 @@ static inline bool cpu_handle_interrupt(CPUState *cpu,
}
/* Finally, check if we need to exit to the main loop. */
if (unlikely(atomic_read(&cpu->exit_request))
|| (use_icount
&& cpu_neg(cpu)->icount_decr.u16.low + cpu->icount_extra == 0)) {
if (unlikely(atomic_read(&cpu->exit_request)
|| (use_icount && cpu->icount_decr.u16.low + cpu->icount_extra == 0))) {
atomic_set(&cpu->exit_request, 0);
if (cpu->exception_index == -1) {
cpu->exception_index = EXCP_INTERRUPT;
@@ -625,7 +632,7 @@ static inline void cpu_loop_exec_tb(CPUState *cpu, TranslationBlock *tb,
}
*last_tb = NULL;
insns_left = atomic_read(&cpu_neg(cpu)->icount_decr.u32);
insns_left = atomic_read(&cpu->icount_decr.u32);
if (insns_left < 0) {
/* Something asked us to stop executing chained TBs; just
* continue round the main loop. Whatever requested the exit
@@ -644,7 +651,7 @@ static inline void cpu_loop_exec_tb(CPUState *cpu, TranslationBlock *tb,
cpu_update_icount(cpu);
/* Refill decrementer and continue execution. */
insns_left = MIN(0xffff, cpu->icount_budget);
cpu_neg(cpu)->icount_decr.u16.low = insns_left;
cpu->icount_decr.u16.low = insns_left;
cpu->icount_extra = cpu->icount_budget - insns_left;
if (!cpu->icount_extra) {
/* Execute any remaining instructions, then let the main loop
@@ -697,15 +704,10 @@ int cpu_exec(CPUState *cpu)
g_assert(cpu == current_cpu);
g_assert(cc == CPU_GET_CLASS(cpu));
#endif /* buggy compiler */
#ifndef CONFIG_SOFTMMU
tcg_debug_assert(!have_mmap_lock());
#endif
tb_lock_reset();
if (qemu_mutex_iothread_locked()) {
qemu_mutex_unlock_iothread();
}
qemu_plugin_disable_mem_helpers(cpu);
assert_no_pages_locked();
}
/* if an exception is pending, we execute it here */
+541 -1707
View File
File diff suppressed because it is too large. Load diff
-932
View File
@@ -1,932 +0,0 @@
/*
* plugin-gen.c - TCG-related bits of plugin infrastructure
*
* Copyright (C) 2018, Emilio G. Cota <cota@braap.org>
* License: GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*
* We support instrumentation at an instruction granularity. That is,
* if a plugin wants to instrument the memory accesses performed by a
* particular instruction, it can just do that instead of instrumenting
* all memory accesses. Thus, in order to do this we first have to
* translate a TB, so that plugins can decide what/where to instrument.
*
* Injecting the desired instrumentation could be done with a second
* translation pass that combined the instrumentation requests, but that
* would be ugly and inefficient since we would decode the guest code twice.
* Instead, during TB translation we add "empty" instrumentation calls for all
* possible instrumentation events, and then once we collect the instrumentation
* requests from plugins, we either "fill in" those empty events or remove them
* if they have no requests.
*
* When "filling in" an event we first copy the empty callback's TCG ops. This
* might seem unnecessary, but it is done to support an arbitrary number
* of callbacks per event. Take for example a regular instruction callback.
* We first generate a callback to an empty helper function. Then, if two
* plugins register one callback each for this instruction, we make two copies
* of the TCG ops generated for the empty callback, substituting the function
* pointer that points to the empty helper function with the plugins' desired
* callback functions. After that we remove the empty callback's ops.
*
* Note that the location in TCGOp.args[] of the pointer to a helper function
* varies across different guest and host architectures. Instead of duplicating
* the logic that figures this out, we rely on the fact that the empty
* callbacks point to empty functions that are unique pointers in the program.
* Thus, to find the right location we just have to look for a match in
* TCGOp.args[]. This is the main reason why we first copy an empty callback's
* TCG ops and then fill them in; regardless of whether we have one or many
* callbacks for that event, the logic to add all of them is the same.
*
* When generating more than one callback per event, we make a small
* optimization to avoid generating redundant operations. For instance, for the
* second and all subsequent callbacks of an event, we do not need to reload the
* CPU's index into a TCG temp, since the first callback did it already.
*/
#include "qemu/osdep.h"
#include "cpu.h"
#include "tcg/tcg.h"
#include "tcg/tcg-op.h"
#include "trace/mem.h"
#include "exec/exec-all.h"
#include "exec/plugin-gen.h"
#include "exec/translator.h"
#ifdef CONFIG_SOFTMMU
# define CONFIG_SOFTMMU_GATE 1
#else
# define CONFIG_SOFTMMU_GATE 0
#endif
/*
* plugin_cb_start TCG op args[]:
* 0: enum plugin_gen_from
* 1: enum plugin_gen_cb
* 2: set to 1 for mem callback that is a write, 0 otherwise.
*/
enum plugin_gen_from {
PLUGIN_GEN_FROM_TB,
PLUGIN_GEN_FROM_INSN,
PLUGIN_GEN_FROM_MEM,
PLUGIN_GEN_AFTER_INSN,
PLUGIN_GEN_N_FROMS,
};
enum plugin_gen_cb {
PLUGIN_GEN_CB_UDATA,
PLUGIN_GEN_CB_INLINE,
PLUGIN_GEN_CB_MEM,
PLUGIN_GEN_ENABLE_MEM_HELPER,
PLUGIN_GEN_DISABLE_MEM_HELPER,
PLUGIN_GEN_N_CBS,
};
/*
* These helpers are stubs that get dynamically switched out for calls
* direct to the plugin if they are subscribed to.
*/
void HELPER(plugin_vcpu_udata_cb)(uint32_t cpu_index, void *udata)
{ }
void HELPER(plugin_vcpu_mem_cb)(unsigned int vcpu_index,
qemu_plugin_meminfo_t info, uint64_t vaddr,
void *userdata)
{ }
static void do_gen_mem_cb(TCGv vaddr, uint32_t info)
{
TCGv_i32 cpu_index = tcg_temp_new_i32();
TCGv_i32 meminfo = tcg_const_i32(info);
TCGv_i64 vaddr64 = tcg_temp_new_i64();
TCGv_ptr udata = tcg_const_ptr(NULL);
tcg_gen_ld_i32(cpu_index, cpu_env,
-offsetof(ArchCPU, env) + offsetof(CPUState, cpu_index));
tcg_gen_extu_tl_i64(vaddr64, vaddr);
gen_helper_plugin_vcpu_mem_cb(cpu_index, meminfo, vaddr64, udata);
tcg_temp_free_ptr(udata);
tcg_temp_free_i64(vaddr64);
tcg_temp_free_i32(meminfo);
tcg_temp_free_i32(cpu_index);
}
static void gen_empty_udata_cb(void)
{
TCGv_i32 cpu_index = tcg_temp_new_i32();
TCGv_ptr udata = tcg_const_ptr(NULL); /* will be overwritten later */
tcg_gen_ld_i32(cpu_index, cpu_env,
-offsetof(ArchCPU, env) + offsetof(CPUState, cpu_index));
gen_helper_plugin_vcpu_udata_cb(cpu_index, udata);
tcg_temp_free_ptr(udata);
tcg_temp_free_i32(cpu_index);
}
/*
* For now we only support addi_i64.
* When we support more ops, we can generate one empty inline cb for each.
*/
static void gen_empty_inline_cb(void)
{
TCGv_i64 val = tcg_temp_new_i64();
TCGv_ptr ptr = tcg_const_ptr(NULL); /* overwritten later */
tcg_gen_ld_i64(val, ptr, 0);
/* pass an immediate != 0 so that it doesn't get optimized away */
tcg_gen_addi_i64(val, val, 0xdeadface);
tcg_gen_st_i64(val, ptr, 0);
tcg_temp_free_ptr(ptr);
tcg_temp_free_i64(val);
}
static void gen_empty_mem_cb(TCGv addr, uint32_t info)
{
do_gen_mem_cb(addr, info);
}
/*
* Share the same function for enable/disable. When enabling, the NULL
* pointer will be overwritten later.
*/
static void gen_empty_mem_helper(void)
{
TCGv_ptr ptr;
ptr = tcg_const_ptr(NULL);
tcg_gen_st_ptr(ptr, cpu_env, offsetof(CPUState, plugin_mem_cbs) -
offsetof(ArchCPU, env));
tcg_temp_free_ptr(ptr);
}
static inline
void gen_plugin_cb_start(enum plugin_gen_from from,
enum plugin_gen_cb type, unsigned wr)
{
TCGOp *op;
tcg_gen_plugin_cb_start(from, type, wr);
op = tcg_last_op();
QSIMPLEQ_INSERT_TAIL(&tcg_ctx->plugin_ops, op, plugin_link);
}
static void gen_wrapped(enum plugin_gen_from from,
enum plugin_gen_cb type, void (*func)(void))
{
gen_plugin_cb_start(from, type, 0);
func();
tcg_gen_plugin_cb_end();
}
static inline void plugin_gen_empty_callback(enum plugin_gen_from from)
{
switch (from) {
case PLUGIN_GEN_AFTER_INSN:
gen_wrapped(from, PLUGIN_GEN_DISABLE_MEM_HELPER,
gen_empty_mem_helper);
break;
case PLUGIN_GEN_FROM_INSN:
/*
* Note: plugin_gen_inject() relies on ENABLE_MEM_HELPER being
* the first callback of an instruction
*/
gen_wrapped(from, PLUGIN_GEN_ENABLE_MEM_HELPER,
gen_empty_mem_helper);
/* fall through */
case PLUGIN_GEN_FROM_TB:
gen_wrapped(from, PLUGIN_GEN_CB_UDATA, gen_empty_udata_cb);
gen_wrapped(from, PLUGIN_GEN_CB_INLINE, gen_empty_inline_cb);
break;
default:
g_assert_not_reached();
}
}
union mem_gen_fn {
void (*mem_fn)(TCGv, uint32_t);
void (*inline_fn)(void);
};
static void gen_mem_wrapped(enum plugin_gen_cb type,
const union mem_gen_fn *f, TCGv addr,
uint32_t info, bool is_mem)
{
int wr = !!(info & TRACE_MEM_ST);
gen_plugin_cb_start(PLUGIN_GEN_FROM_MEM, type, wr);
if (is_mem) {
f->mem_fn(addr, info);
} else {
f->inline_fn();
}
tcg_gen_plugin_cb_end();
}
void plugin_gen_empty_mem_callback(TCGv addr, uint32_t info)
{
union mem_gen_fn fn;
fn.mem_fn = gen_empty_mem_cb;
gen_mem_wrapped(PLUGIN_GEN_CB_MEM, &fn, addr, info, true);
fn.inline_fn = gen_empty_inline_cb;
gen_mem_wrapped(PLUGIN_GEN_CB_INLINE, &fn, 0, info, false);
}
static TCGOp *find_op(TCGOp *op, TCGOpcode opc)
{
while (op) {
if (op->opc == opc) {
return op;
}
op = QTAILQ_NEXT(op, link);
}
return NULL;
}
static TCGOp *rm_ops_range(TCGOp *begin, TCGOp *end)
{
TCGOp *ret = QTAILQ_NEXT(end, link);
QTAILQ_REMOVE_SEVERAL(&tcg_ctx->ops, begin, end, link);
return ret;
}
/* remove all ops until (and including) plugin_cb_end */
static TCGOp *rm_ops(TCGOp *op)
{
TCGOp *end_op = find_op(op, INDEX_op_plugin_cb_end);
tcg_debug_assert(end_op);
return rm_ops_range(op, end_op);
}
static TCGOp *copy_op_nocheck(TCGOp **begin_op, TCGOp *op)
{
*begin_op = QTAILQ_NEXT(*begin_op, link);
tcg_debug_assert(*begin_op);
op = tcg_op_insert_after(tcg_ctx, op, (*begin_op)->opc);
memcpy(op->args, (*begin_op)->args, sizeof(op->args));
return op;
}
static TCGOp *copy_op(TCGOp **begin_op, TCGOp *op, TCGOpcode opc)
{
op = copy_op_nocheck(begin_op, op);
tcg_debug_assert((*begin_op)->opc == opc);
return op;
}
static TCGOp *copy_extu_i32_i64(TCGOp **begin_op, TCGOp *op)
{
if (TCG_TARGET_REG_BITS == 32) {
/* mov_i32 */
op = copy_op(begin_op, op, INDEX_op_mov_i32);
/* movi_i32 */
op = copy_op(begin_op, op, INDEX_op_movi_i32);
} else {
/* extu_i32_i64 */
op = copy_op(begin_op, op, INDEX_op_extu_i32_i64);
}
return op;
}
static TCGOp *copy_mov_i64(TCGOp **begin_op, TCGOp *op)
{
if (TCG_TARGET_REG_BITS == 32) {
/* 2x mov_i32 */
op = copy_op(begin_op, op, INDEX_op_mov_i32);
op = copy_op(begin_op, op, INDEX_op_mov_i32);
} else {
/* mov_i64 */
op = copy_op(begin_op, op, INDEX_op_mov_i64);
}
return op;
}
static TCGOp *copy_movi_i64(TCGOp **begin_op, TCGOp *op, uint64_t v)
{
if (TCG_TARGET_REG_BITS == 32) {
/* 2x movi_i32 */
op = copy_op(begin_op, op, INDEX_op_movi_i32);
op->args[1] = v;
op = copy_op(begin_op, op, INDEX_op_movi_i32);
op->args[1] = v >> 32;
} else {
/* movi_i64 */
op = copy_op(begin_op, op, INDEX_op_movi_i64);
op->args[1] = v;
}
return op;
}
static TCGOp *copy_const_ptr(TCGOp **begin_op, TCGOp *op, void *ptr)
{
if (UINTPTR_MAX == UINT32_MAX) {
/* movi_i32 */
op = copy_op(begin_op, op, INDEX_op_movi_i32);
op->args[1] = (uintptr_t)ptr;
} else {
/* movi_i64 */
op = copy_movi_i64(begin_op, op, (uint64_t)(uintptr_t)ptr);
}
return op;
}
static TCGOp *copy_const_i64(TCGOp **begin_op, TCGOp *op, uint64_t v)
{
return copy_movi_i64(begin_op, op, v);
}
static TCGOp *copy_extu_tl_i64(TCGOp **begin_op, TCGOp *op)
{
if (TARGET_LONG_BITS == 32) {
/* extu_i32_i64 */
op = copy_extu_i32_i64(begin_op, op);
} else {
/* mov_i64 */
op = copy_mov_i64(begin_op, op);
}
return op;
}
static TCGOp *copy_ld_i64(TCGOp **begin_op, TCGOp *op)
{
if (TCG_TARGET_REG_BITS == 32) {
/* 2x ld_i32 */
op = copy_op(begin_op, op, INDEX_op_ld_i32);
op = copy_op(begin_op, op, INDEX_op_ld_i32);
} else {
/* ld_i64 */
op = copy_op(begin_op, op, INDEX_op_ld_i64);
}
return op;
}
static TCGOp *copy_st_i64(TCGOp **begin_op, TCGOp *op)
{
if (TCG_TARGET_REG_BITS == 32) {
/* 2x st_i32 */
op = copy_op(begin_op, op, INDEX_op_st_i32);
op = copy_op(begin_op, op, INDEX_op_st_i32);
} else {
/* st_i64 */
op = copy_op(begin_op, op, INDEX_op_st_i64);
}
return op;
}
static TCGOp *copy_add_i64(TCGOp **begin_op, TCGOp *op)
{
if (TCG_TARGET_REG_BITS == 32) {
/* all 32-bit backends must implement add2_i32 */
g_assert(TCG_TARGET_HAS_add2_i32);
op = copy_op(begin_op, op, INDEX_op_add2_i32);
} else {
op = copy_op(begin_op, op, INDEX_op_add_i64);
}
return op;
}
static TCGOp *copy_st_ptr(TCGOp **begin_op, TCGOp *op)
{
if (UINTPTR_MAX == UINT32_MAX) {
/* st_i32 */
op = copy_op(begin_op, op, INDEX_op_st_i32);
} else {
/* st_i64 */
op = copy_st_i64(begin_op, op);
}
return op;
}
static TCGOp *copy_call(TCGOp **begin_op, TCGOp *op, void *empty_func,
void *func, unsigned tcg_flags, int *cb_idx)
{
/* copy all ops until the call */
do {
op = copy_op_nocheck(begin_op, op);
} while (op->opc != INDEX_op_call);
/* fill in the op call */
op->param1 = (*begin_op)->param1;
op->param2 = (*begin_op)->param2;
tcg_debug_assert(op->life == 0);
if (*cb_idx == -1) {
int i;
/*
* Instead of working out the position of the callback in args[], just
* look for @empty_func, since it should be a unique pointer.
*/
for (i = 0; i < MAX_OPC_PARAM_ARGS; i++) {
if ((uintptr_t)(*begin_op)->args[i] == (uintptr_t)empty_func) {
*cb_idx = i;
break;
}
}
tcg_debug_assert(i < MAX_OPC_PARAM_ARGS);
}
op->args[*cb_idx] = (uintptr_t)func;
op->args[*cb_idx + 1] = tcg_flags;
return op;
}
static TCGOp *append_udata_cb(const struct qemu_plugin_dyn_cb *cb,
TCGOp *begin_op, TCGOp *op, int *cb_idx)
{
/* const_ptr */
op = copy_const_ptr(&begin_op, op, cb->userp);
/* copy the ld_i32, but note that we only have to copy it once */
begin_op = QTAILQ_NEXT(begin_op, link);
tcg_debug_assert(begin_op && begin_op->opc == INDEX_op_ld_i32);
if (*cb_idx == -1) {
op = tcg_op_insert_after(tcg_ctx, op, INDEX_op_ld_i32);
memcpy(op->args, begin_op->args, sizeof(op->args));
}
/* call */
op = copy_call(&begin_op, op, HELPER(plugin_vcpu_udata_cb),
cb->f.vcpu_udata, cb->tcg_flags, cb_idx);
return op;
}
static TCGOp *append_inline_cb(const struct qemu_plugin_dyn_cb *cb,
TCGOp *begin_op, TCGOp *op,
int *unused)
{
/* const_ptr */
op = copy_const_ptr(&begin_op, op, cb->userp);
/* ld_i64 */
op = copy_ld_i64(&begin_op, op);
/* const_i64 */
op = copy_const_i64(&begin_op, op, cb->inline_insn.imm);
/* add_i64 */
op = copy_add_i64(&begin_op, op);
/* st_i64 */
op = copy_st_i64(&begin_op, op);
return op;
}
static TCGOp *append_mem_cb(const struct qemu_plugin_dyn_cb *cb,
TCGOp *begin_op, TCGOp *op, int *cb_idx)
{
enum plugin_gen_cb type = begin_op->args[1];
tcg_debug_assert(type == PLUGIN_GEN_CB_MEM);
/* const_i32 == movi_i32 ("info", so it remains as is) */
op = copy_op(&begin_op, op, INDEX_op_movi_i32);
/* const_ptr */
op = copy_const_ptr(&begin_op, op, cb->userp);
/* copy the ld_i32, but note that we only have to copy it once */
begin_op = QTAILQ_NEXT(begin_op, link);
tcg_debug_assert(begin_op && begin_op->opc == INDEX_op_ld_i32);
if (*cb_idx == -1) {
op = tcg_op_insert_after(tcg_ctx, op, INDEX_op_ld_i32);
memcpy(op->args, begin_op->args, sizeof(op->args));
}
/* extu_tl_i64 */
op = copy_extu_tl_i64(&begin_op, op);
if (type == PLUGIN_GEN_CB_MEM) {
/* call */
op = copy_call(&begin_op, op, HELPER(plugin_vcpu_mem_cb),
cb->f.vcpu_udata, cb->tcg_flags, cb_idx);
}
return op;
}
typedef TCGOp *(*inject_fn)(const struct qemu_plugin_dyn_cb *cb,
TCGOp *begin_op, TCGOp *op, int *intp);
typedef bool (*op_ok_fn)(const TCGOp *op, const struct qemu_plugin_dyn_cb *cb);
static bool op_ok(const TCGOp *op, const struct qemu_plugin_dyn_cb *cb)
{
return true;
}
static bool op_rw(const TCGOp *op, const struct qemu_plugin_dyn_cb *cb)
{
int w;
w = op->args[2];
return !!(cb->rw & (w + 1));
}
static inline
void inject_cb_type(const GArray *cbs, TCGOp *begin_op, inject_fn inject,
op_ok_fn ok)
{
TCGOp *end_op;
TCGOp *op;
int cb_idx = -1;
int i;
if (!cbs || cbs->len == 0) {
rm_ops(begin_op);
return;
}
end_op = find_op(begin_op, INDEX_op_plugin_cb_end);
tcg_debug_assert(end_op);
op = end_op;
for (i = 0; i < cbs->len; i++) {
struct qemu_plugin_dyn_cb *cb =
&g_array_index(cbs, struct qemu_plugin_dyn_cb, i);
if (!ok(begin_op, cb)) {
continue;
}
op = inject(cb, begin_op, op, &cb_idx);
}
rm_ops_range(begin_op, end_op);
}
static void
inject_udata_cb(const GArray *cbs, TCGOp *begin_op)
{
inject_cb_type(cbs, begin_op, append_udata_cb, op_ok);
}
static void
inject_inline_cb(const GArray *cbs, TCGOp *begin_op, op_ok_fn ok)
{
inject_cb_type(cbs, begin_op, append_inline_cb, ok);
}
static void
inject_mem_cb(const GArray *cbs, TCGOp *begin_op)
{
inject_cb_type(cbs, begin_op, append_mem_cb, op_rw);
}
/* we could change the ops in place, but we can reuse more code by copying */
static void inject_mem_helper(TCGOp *begin_op, GArray *arr)
{
TCGOp *orig_op = begin_op;
TCGOp *end_op;
TCGOp *op;
end_op = find_op(begin_op, INDEX_op_plugin_cb_end);
tcg_debug_assert(end_op);
/* const ptr */
op = copy_const_ptr(&begin_op, end_op, arr);
/* st_ptr */
op = copy_st_ptr(&begin_op, op);
rm_ops_range(orig_op, end_op);
}
/*
* Tracking memory accesses performed from helpers requires extra work.
* If an instruction is emulated with helpers, we do two things:
* (1) copy the CB descriptors, and keep track of it so that they can be
* freed later on, and (2) point CPUState.plugin_mem_cbs to the descriptors, so
* that we can read them at run-time (i.e. when the helper executes).
* This run-time access is performed from qemu_plugin_vcpu_mem_cb.
*
* Note that plugin_gen_disable_mem_helpers undoes (2). Since it
* is possible that the code we generate after the instruction is
* dead, we also add checks before generating tb_exit etc.
*/
static void inject_mem_enable_helper(struct qemu_plugin_insn *plugin_insn,
TCGOp *begin_op)
{
GArray *cbs[2];
GArray *arr;
size_t n_cbs, i;
cbs[0] = plugin_insn->cbs[PLUGIN_CB_MEM][PLUGIN_CB_REGULAR];
cbs[1] = plugin_insn->cbs[PLUGIN_CB_MEM][PLUGIN_CB_INLINE];
n_cbs = 0;
for (i = 0; i < ARRAY_SIZE(cbs); i++) {
n_cbs += cbs[i]->len;
}
plugin_insn->mem_helper = plugin_insn->calls_helpers && n_cbs;
if (likely(!plugin_insn->mem_helper)) {
rm_ops(begin_op);
return;
}
arr = g_array_sized_new(false, false,
sizeof(struct qemu_plugin_dyn_cb), n_cbs);
for (i = 0; i < ARRAY_SIZE(cbs); i++) {
g_array_append_vals(arr, cbs[i]->data, cbs[i]->len);
}
qemu_plugin_add_dyn_cb_arr(arr);
inject_mem_helper(begin_op, arr);
}
static void inject_mem_disable_helper(struct qemu_plugin_insn *plugin_insn,
TCGOp *begin_op)
{
if (likely(!plugin_insn->mem_helper)) {
rm_ops(begin_op);
return;
}
inject_mem_helper(begin_op, NULL);
}
/* called before finishing a TB with exit_tb, goto_tb or goto_ptr */
void plugin_gen_disable_mem_helpers(void)
{
TCGv_ptr ptr;
if (likely(tcg_ctx->plugin_insn == NULL ||
!tcg_ctx->plugin_insn->mem_helper)) {
return;
}
ptr = tcg_const_ptr(NULL);
tcg_gen_st_ptr(ptr, cpu_env, offsetof(CPUState, plugin_mem_cbs) -
offsetof(ArchCPU, env));
tcg_temp_free_ptr(ptr);
tcg_ctx->plugin_insn->mem_helper = false;
}
static void plugin_gen_tb_udata(const struct qemu_plugin_tb *ptb,
TCGOp *begin_op)
{
inject_udata_cb(ptb->cbs[PLUGIN_CB_REGULAR], begin_op);
}
static void plugin_gen_tb_inline(const struct qemu_plugin_tb *ptb,
TCGOp *begin_op)
{
inject_inline_cb(ptb->cbs[PLUGIN_CB_INLINE], begin_op, op_ok);
}
static void plugin_gen_insn_udata(const struct qemu_plugin_tb *ptb,
TCGOp *begin_op, int insn_idx)
{
struct qemu_plugin_insn *insn = g_ptr_array_index(ptb->insns, insn_idx);
inject_udata_cb(insn->cbs[PLUGIN_CB_INSN][PLUGIN_CB_REGULAR], begin_op);
}
static void plugin_gen_insn_inline(const struct qemu_plugin_tb *ptb,
TCGOp *begin_op, int insn_idx)
{
struct qemu_plugin_insn *insn = g_ptr_array_index(ptb->insns, insn_idx);
inject_inline_cb(insn->cbs[PLUGIN_CB_INSN][PLUGIN_CB_INLINE],
begin_op, op_ok);
}
static void plugin_gen_mem_regular(const struct qemu_plugin_tb *ptb,
TCGOp *begin_op, int insn_idx)
{
struct qemu_plugin_insn *insn = g_ptr_array_index(ptb->insns, insn_idx);
inject_mem_cb(insn->cbs[PLUGIN_CB_MEM][PLUGIN_CB_REGULAR], begin_op);
}
static void plugin_gen_mem_inline(const struct qemu_plugin_tb *ptb,
TCGOp *begin_op, int insn_idx)
{
const GArray *cbs;
struct qemu_plugin_insn *insn = g_ptr_array_index(ptb->insns, insn_idx);
cbs = insn->cbs[PLUGIN_CB_MEM][PLUGIN_CB_INLINE];
inject_inline_cb(cbs, begin_op, op_rw);
}
static void plugin_gen_enable_mem_helper(const struct qemu_plugin_tb *ptb,
TCGOp *begin_op, int insn_idx)
{
struct qemu_plugin_insn *insn = g_ptr_array_index(ptb->insns, insn_idx);
inject_mem_enable_helper(insn, begin_op);
}
static void plugin_gen_disable_mem_helper(const struct qemu_plugin_tb *ptb,
TCGOp *begin_op, int insn_idx)
{
struct qemu_plugin_insn *insn = g_ptr_array_index(ptb->insns, insn_idx);
inject_mem_disable_helper(insn, begin_op);
}
static void plugin_inject_cb(const struct qemu_plugin_tb *ptb, TCGOp *begin_op,
int insn_idx)
{
enum plugin_gen_from from = begin_op->args[0];
enum plugin_gen_cb type = begin_op->args[1];
switch (from) {
case PLUGIN_GEN_FROM_TB:
switch (type) {
case PLUGIN_GEN_CB_UDATA:
plugin_gen_tb_udata(ptb, begin_op);
return;
case PLUGIN_GEN_CB_INLINE:
plugin_gen_tb_inline(ptb, begin_op);
return;
default:
g_assert_not_reached();
}
case PLUGIN_GEN_FROM_INSN:
switch (type) {
case PLUGIN_GEN_CB_UDATA:
plugin_gen_insn_udata(ptb, begin_op, insn_idx);
return;
case PLUGIN_GEN_CB_INLINE:
plugin_gen_insn_inline(ptb, begin_op, insn_idx);
return;
case PLUGIN_GEN_ENABLE_MEM_HELPER:
plugin_gen_enable_mem_helper(ptb, begin_op, insn_idx);
return;
default:
g_assert_not_reached();
}
case PLUGIN_GEN_FROM_MEM:
switch (type) {
case PLUGIN_GEN_CB_MEM:
plugin_gen_mem_regular(ptb, begin_op, insn_idx);
return;
case PLUGIN_GEN_CB_INLINE:
plugin_gen_mem_inline(ptb, begin_op, insn_idx);
return;
default:
g_assert_not_reached();
}
case PLUGIN_GEN_AFTER_INSN:
switch (type) {
case PLUGIN_GEN_DISABLE_MEM_HELPER:
plugin_gen_disable_mem_helper(ptb, begin_op, insn_idx);
return;
default:
g_assert_not_reached();
}
default:
g_assert_not_reached();
}
}
/* #define DEBUG_PLUGIN_GEN_OPS */
static void pr_ops(void)
{
#ifdef DEBUG_PLUGIN_GEN_OPS
TCGOp *op;
int i = 0;
QTAILQ_FOREACH(op, &tcg_ctx->ops, link) {
const char *name = "";
const char *type = "";
if (op->opc == INDEX_op_plugin_cb_start) {
switch (op->args[0]) {
case PLUGIN_GEN_FROM_TB:
name = "tb";
break;
case PLUGIN_GEN_FROM_INSN:
name = "insn";
break;
case PLUGIN_GEN_FROM_MEM:
name = "mem";
break;
case PLUGIN_GEN_AFTER_INSN:
name = "after insn";
break;
default:
break;
}
switch (op->args[1]) {
case PLUGIN_GEN_CB_UDATA:
type = "udata";
break;
case PLUGIN_GEN_CB_INLINE:
type = "inline";
break;
case PLUGIN_GEN_CB_MEM:
type = "mem";
break;
case PLUGIN_GEN_ENABLE_MEM_HELPER:
type = "enable mem helper";
break;
case PLUGIN_GEN_DISABLE_MEM_HELPER:
type = "disable mem helper";
break;
default:
break;
}
}
printf("op[%2i]: %s %s %s\n", i, tcg_op_defs[op->opc].name, name, type);
i++;
}
#endif
}
static void plugin_gen_inject(const struct qemu_plugin_tb *plugin_tb)
{
TCGOp *op;
int insn_idx;
pr_ops();
insn_idx = -1;
QSIMPLEQ_FOREACH(op, &tcg_ctx->plugin_ops, plugin_link) {
enum plugin_gen_from from = op->args[0];
enum plugin_gen_cb type = op->args[1];
tcg_debug_assert(op->opc == INDEX_op_plugin_cb_start);
/* ENABLE_MEM_HELPER is the first callback of an instruction */
if (from == PLUGIN_GEN_FROM_INSN &&
type == PLUGIN_GEN_ENABLE_MEM_HELPER) {
insn_idx++;
}
plugin_inject_cb(plugin_tb, op, insn_idx);
}
pr_ops();
}
bool plugin_gen_tb_start(CPUState *cpu, const TranslationBlock *tb)
{
struct qemu_plugin_tb *ptb = tcg_ctx->plugin_tb;
bool ret = false;
if (test_bit(QEMU_PLUGIN_EV_VCPU_TB_TRANS, cpu->plugin_mask)) {
ret = true;
QSIMPLEQ_INIT(&tcg_ctx->plugin_ops);
ptb->vaddr = tb->pc;
ptb->vaddr2 = -1;
get_page_addr_code_hostp(cpu->env_ptr, tb->pc, &ptb->haddr1);
ptb->haddr2 = NULL;
plugin_gen_empty_callback(PLUGIN_GEN_FROM_TB);
}
return ret;
}
void plugin_gen_insn_start(CPUState *cpu, const DisasContextBase *db)
{
struct qemu_plugin_tb *ptb = tcg_ctx->plugin_tb;
struct qemu_plugin_insn *pinsn;
pinsn = qemu_plugin_tb_insn_get(ptb);
tcg_ctx->plugin_insn = pinsn;
pinsn->vaddr = db->pc_next;
plugin_gen_empty_callback(PLUGIN_GEN_FROM_INSN);
/*
* Detect page crossing to get the new host address.
* Note that we skip this when haddr1 == NULL, e.g. when we're
* fetching instructions from a region not backed by RAM.
*/
if (likely(ptb->haddr1 != NULL && ptb->vaddr2 == -1) &&
unlikely((db->pc_next & TARGET_PAGE_MASK) !=
(db->pc_first & TARGET_PAGE_MASK))) {
get_page_addr_code_hostp(cpu->env_ptr, db->pc_next,
&ptb->haddr2);
ptb->vaddr2 = db->pc_next;
}
if (likely(ptb->vaddr2 == -1)) {
pinsn->haddr = ptb->haddr1 + pinsn->vaddr - ptb->vaddr;
} else {
pinsn->haddr = ptb->haddr2 + pinsn->vaddr - ptb->vaddr2;
}
}
void plugin_gen_insn_end(void)
{
plugin_gen_empty_callback(PLUGIN_GEN_AFTER_INSN);
}
void plugin_gen_tb_end(CPUState *cpu)
{
struct qemu_plugin_tb *ptb = tcg_ctx->plugin_tb;
int i;
/* collect instrumentation requests */
qemu_plugin_tb_trans_cb(cpu, ptb);
/* inject the instrumentation at the appropriate places */
plugin_gen_inject(ptb);
/* clean up */
for (i = 0; i < PLUGIN_N_CB_SUBTYPES; i++) {
if (ptb->cbs[i]) {
g_array_set_size(ptb->cbs[i], 0);
}
}
ptb->n = 0;
tcg_ctx->plugin_insn = NULL;
}
-5
View File
@@ -1,5 +0,0 @@
#ifdef CONFIG_PLUGIN
/* Note: no TCG flags because those are overwritten later */
DEF_HELPER_2(plugin_vcpu_udata_cb, void, i32, ptr)
DEF_HELPER_4(plugin_vcpu_mem_cb, void, i32, i32, i64, ptr)
#endif
+435
View File
@@ -0,0 +1,435 @@
/*
* Software MMU support
*
* Generate helpers used by TCG for qemu_ld/st ops and code load
* functions.
*
* Included from target op helpers and exec.c.
*
* Copyright (c) 2003 Fabrice Bellard
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*/
#if DATA_SIZE == 8
#define SUFFIX q
#define LSUFFIX q
#define SDATA_TYPE int64_t
#define DATA_TYPE uint64_t
#elif DATA_SIZE == 4
#define SUFFIX l
#define LSUFFIX l
#define SDATA_TYPE int32_t
#define DATA_TYPE uint32_t
#elif DATA_SIZE == 2
#define SUFFIX w
#define LSUFFIX uw
#define SDATA_TYPE int16_t
#define DATA_TYPE uint16_t
#elif DATA_SIZE == 1
#define SUFFIX b
#define LSUFFIX ub
#define SDATA_TYPE int8_t
#define DATA_TYPE uint8_t
#else
#error unsupported data size
#endif
/* For the benefit of TCG generated code, we want to avoid the complication
of ABI-specific return type promotion and always return a value extended
to the register size of the host. This is tcg_target_long, except in the
case of a 32-bit host and 64-bit data, and for that we always have
uint64_t. Don't bother with this widened value for SOFTMMU_CODE_ACCESS. */
#if defined(SOFTMMU_CODE_ACCESS) || DATA_SIZE == 8
# define WORD_TYPE DATA_TYPE
# define USUFFIX SUFFIX
#else
# define WORD_TYPE tcg_target_ulong
# define USUFFIX glue(u, SUFFIX)
# define SSUFFIX glue(s, SUFFIX)
#endif
#ifdef SOFTMMU_CODE_ACCESS
#define READ_ACCESS_TYPE MMU_INST_FETCH
#define ADDR_READ addr_code
#else
#define READ_ACCESS_TYPE MMU_DATA_LOAD
#define ADDR_READ addr_read
#endif
#if DATA_SIZE == 8
# define BSWAP(X) bswap64(X)
#elif DATA_SIZE == 4
# define BSWAP(X) bswap32(X)
#elif DATA_SIZE == 2
# define BSWAP(X) bswap16(X)
#else
# define BSWAP(X) (X)
#endif
#if DATA_SIZE == 1
# define helper_le_ld_name glue(glue(helper_ret_ld, USUFFIX), MMUSUFFIX)
# define helper_be_ld_name helper_le_ld_name
# define helper_le_lds_name glue(glue(helper_ret_ld, SSUFFIX), MMUSUFFIX)
# define helper_be_lds_name helper_le_lds_name
# define helper_le_st_name glue(glue(helper_ret_st, SUFFIX), MMUSUFFIX)
# define helper_be_st_name helper_le_st_name
#else
# define helper_le_ld_name glue(glue(helper_le_ld, USUFFIX), MMUSUFFIX)
# define helper_be_ld_name glue(glue(helper_be_ld, USUFFIX), MMUSUFFIX)
# define helper_le_lds_name glue(glue(helper_le_ld, SSUFFIX), MMUSUFFIX)
# define helper_be_lds_name glue(glue(helper_be_ld, SSUFFIX), MMUSUFFIX)
# define helper_le_st_name glue(glue(helper_le_st, SUFFIX), MMUSUFFIX)
# define helper_be_st_name glue(glue(helper_be_st, SUFFIX), MMUSUFFIX)
#endif
#ifndef SOFTMMU_CODE_ACCESS
static inline DATA_TYPE glue(io_read, SUFFIX)(CPUArchState *env,
size_t mmu_idx, size_t index,
target_ulong addr,
uintptr_t retaddr)
{
CPUIOTLBEntry *iotlbentry = &env->iotlb[mmu_idx][index];
return io_readx(env, iotlbentry, mmu_idx, addr, retaddr, DATA_SIZE);
}
#endif
WORD_TYPE helper_le_ld_name(CPUArchState *env, target_ulong addr,
TCGMemOpIdx oi, uintptr_t retaddr)
{
unsigned mmu_idx = get_mmuidx(oi);
int index = (addr >> TARGET_PAGE_BITS) & (CPU_TLB_SIZE - 1);
target_ulong tlb_addr = env->tlb_table[mmu_idx][index].ADDR_READ;
unsigned a_bits = get_alignment_bits(get_memop(oi));
uintptr_t haddr;
DATA_TYPE res;
if (addr & ((1 << a_bits) - 1)) {
cpu_unaligned_access(ENV_GET_CPU(env), addr, READ_ACCESS_TYPE,
mmu_idx, retaddr);
}
/* If the TLB entry is for a different page, reload and try again. */
if ((addr & TARGET_PAGE_MASK)
!= (tlb_addr & (TARGET_PAGE_MASK | TLB_INVALID_MASK))) {
if (!VICTIM_TLB_HIT(ADDR_READ, addr)) {
tlb_fill(ENV_GET_CPU(env), addr, DATA_SIZE, READ_ACCESS_TYPE,
mmu_idx, retaddr);
}
tlb_addr = env->tlb_table[mmu_idx][index].ADDR_READ;
}
/* Handle an IO access. */
if (unlikely(tlb_addr & ~TARGET_PAGE_MASK)) {
if ((addr & (DATA_SIZE - 1)) != 0) {
goto do_unaligned_access;
}
/* ??? Note that the io helpers always read data in the target
byte ordering. We should push the LE/BE request down into io. */
res = glue(io_read, SUFFIX)(env, mmu_idx, index, addr, retaddr);
res = TGT_LE(res);
return res;
}
/* Handle slow unaligned access (it spans two pages or IO). */
if (DATA_SIZE > 1
&& unlikely((addr & ~TARGET_PAGE_MASK) + DATA_SIZE - 1
>= TARGET_PAGE_SIZE)) {
target_ulong addr1, addr2;
DATA_TYPE res1, res2;
unsigned shift;
do_unaligned_access:
addr1 = addr & ~(DATA_SIZE - 1);
addr2 = addr1 + DATA_SIZE;
res1 = helper_le_ld_name(env, addr1, oi, retaddr);
res2 = helper_le_ld_name(env, addr2, oi, retaddr);
shift = (addr & (DATA_SIZE - 1)) * 8;
/* Little-endian combine. */
res = (res1 >> shift) | (res2 << ((DATA_SIZE * 8) - shift));
return res;
}
haddr = addr + env->tlb_table[mmu_idx][index].addend;
#if DATA_SIZE == 1
res = glue(glue(ld, LSUFFIX), _p)((uint8_t *)haddr);
#else
res = glue(glue(ld, LSUFFIX), _le_p)((uint8_t *)haddr);
#endif
return res;
}
#if DATA_SIZE > 1
WORD_TYPE helper_be_ld_name(CPUArchState *env, target_ulong addr,
TCGMemOpIdx oi, uintptr_t retaddr)
{
unsigned mmu_idx = get_mmuidx(oi);
int index = (addr >> TARGET_PAGE_BITS) & (CPU_TLB_SIZE - 1);
target_ulong tlb_addr = env->tlb_table[mmu_idx][index].ADDR_READ;
unsigned a_bits = get_alignment_bits(get_memop(oi));
uintptr_t haddr;
DATA_TYPE res;
if (addr & ((1 << a_bits) - 1)) {
cpu_unaligned_access(ENV_GET_CPU(env), addr, READ_ACCESS_TYPE,
mmu_idx, retaddr);
}
/* If the TLB entry is for a different page, reload and try again. */
if ((addr & TARGET_PAGE_MASK)
!= (tlb_addr & (TARGET_PAGE_MASK | TLB_INVALID_MASK))) {
if (!VICTIM_TLB_HIT(ADDR_READ, addr)) {
tlb_fill(ENV_GET_CPU(env), addr, DATA_SIZE, READ_ACCESS_TYPE,
mmu_idx, retaddr);
}
tlb_addr = env->tlb_table[mmu_idx][index].ADDR_READ;
}
/* Handle an IO access. */
if (unlikely(tlb_addr & ~TARGET_PAGE_MASK)) {
if ((addr & (DATA_SIZE - 1)) != 0) {
goto do_unaligned_access;
}
/* ??? Note that the io helpers always read data in the target
byte ordering. We should push the LE/BE request down into io. */
res = glue(io_read, SUFFIX)(env, mmu_idx, index, addr, retaddr);
res = TGT_BE(res);
return res;
}
/* Handle slow unaligned access (it spans two pages or IO). */
if (DATA_SIZE > 1
&& unlikely((addr & ~TARGET_PAGE_MASK) + DATA_SIZE - 1
>= TARGET_PAGE_SIZE)) {
target_ulong addr1, addr2;
DATA_TYPE res1, res2;
unsigned shift;
do_unaligned_access:
addr1 = addr & ~(DATA_SIZE - 1);
addr2 = addr1 + DATA_SIZE;
res1 = helper_be_ld_name(env, addr1, oi, retaddr);
res2 = helper_be_ld_name(env, addr2, oi, retaddr);
shift = (addr & (DATA_SIZE - 1)) * 8;
/* Big-endian combine. */
res = (res1 << shift) | (res2 >> ((DATA_SIZE * 8) - shift));
return res;
}
haddr = addr + env->tlb_table[mmu_idx][index].addend;
res = glue(glue(ld, LSUFFIX), _be_p)((uint8_t *)haddr);
return res;
}
#endif /* DATA_SIZE > 1 */
#ifndef SOFTMMU_CODE_ACCESS
/* Provide signed versions of the load routines as well. We can of course
avoid this for 64-bit data, or for 32-bit data on 32-bit host. */
#if DATA_SIZE * 8 < TCG_TARGET_REG_BITS
WORD_TYPE helper_le_lds_name(CPUArchState *env, target_ulong addr,
TCGMemOpIdx oi, uintptr_t retaddr)
{
return (SDATA_TYPE)helper_le_ld_name(env, addr, oi, retaddr);
}
# if DATA_SIZE > 1
WORD_TYPE helper_be_lds_name(CPUArchState *env, target_ulong addr,
TCGMemOpIdx oi, uintptr_t retaddr)
{
return (SDATA_TYPE)helper_be_ld_name(env, addr, oi, retaddr);
}
# endif
#endif
static inline void glue(io_write, SUFFIX)(CPUArchState *env,
size_t mmu_idx, size_t index,
DATA_TYPE val,
target_ulong addr,
uintptr_t retaddr)
{
CPUIOTLBEntry *iotlbentry = &env->iotlb[mmu_idx][index];
return io_writex(env, iotlbentry, mmu_idx, val, addr, retaddr, DATA_SIZE);
}
void helper_le_st_name(CPUArchState *env, target_ulong addr, DATA_TYPE val,
TCGMemOpIdx oi, uintptr_t retaddr)
{
unsigned mmu_idx = get_mmuidx(oi);
int index = (addr >> TARGET_PAGE_BITS) & (CPU_TLB_SIZE - 1);
target_ulong tlb_addr = env->tlb_table[mmu_idx][index].addr_write;
unsigned a_bits = get_alignment_bits(get_memop(oi));
uintptr_t haddr;
if (addr & ((1 << a_bits) - 1)) {
cpu_unaligned_access(ENV_GET_CPU(env), addr, MMU_DATA_STORE,
mmu_idx, retaddr);
}
/* If the TLB entry is for a different page, reload and try again. */
if ((addr & TARGET_PAGE_MASK)
!= (tlb_addr & (TARGET_PAGE_MASK | TLB_INVALID_MASK))) {
if (!VICTIM_TLB_HIT(addr_write, addr)) {
tlb_fill(ENV_GET_CPU(env), addr, DATA_SIZE, MMU_DATA_STORE,
mmu_idx, retaddr);
}
tlb_addr = env->tlb_table[mmu_idx][index].addr_write & ~TLB_INVALID_MASK;
}
/* Handle an IO access. */
if (unlikely(tlb_addr & ~TARGET_PAGE_MASK)) {
if ((addr & (DATA_SIZE - 1)) != 0) {
goto do_unaligned_access;
}
/* ??? Note that the io helpers always read data in the target
byte ordering. We should push the LE/BE request down into io. */
val = TGT_LE(val);
glue(io_write, SUFFIX)(env, mmu_idx, index, val, addr, retaddr);
return;
}
/* Handle slow unaligned access (it spans two pages or IO). */
if (DATA_SIZE > 1
&& unlikely((addr & ~TARGET_PAGE_MASK) + DATA_SIZE - 1
>= TARGET_PAGE_SIZE)) {
int i, index2;
target_ulong page2, tlb_addr2;
do_unaligned_access:
/* Ensure the second page is in the TLB. Note that the first page
is already guaranteed to be filled, and that the second page
cannot evict the first. */
page2 = (addr + DATA_SIZE) & TARGET_PAGE_MASK;
index2 = (page2 >> TARGET_PAGE_BITS) & (CPU_TLB_SIZE - 1);
tlb_addr2 = env->tlb_table[mmu_idx][index2].addr_write;
if (page2 != (tlb_addr2 & (TARGET_PAGE_MASK | TLB_INVALID_MASK))
&& !VICTIM_TLB_HIT(addr_write, page2)) {
tlb_fill(ENV_GET_CPU(env), page2, DATA_SIZE, MMU_DATA_STORE,
mmu_idx, retaddr);
}
/* XXX: not efficient, but simple. */
/* This loop must go in the forward direction to avoid issues
with self-modifying code in Windows 64-bit. */
for (i = 0; i < DATA_SIZE; ++i) {
/* Little-endian extract. */
uint8_t val8 = val >> (i * 8);
glue(helper_ret_stb, MMUSUFFIX)(env, addr + i, val8,
oi, retaddr);
}
return;
}
haddr = addr + env->tlb_table[mmu_idx][index].addend;
#if DATA_SIZE == 1
glue(glue(st, SUFFIX), _p)((uint8_t *)haddr, val);
#else
glue(glue(st, SUFFIX), _le_p)((uint8_t *)haddr, val);
#endif
}
#if DATA_SIZE > 1
void helper_be_st_name(CPUArchState *env, target_ulong addr, DATA_TYPE val,
TCGMemOpIdx oi, uintptr_t retaddr)
{
unsigned mmu_idx = get_mmuidx(oi);
int index = (addr >> TARGET_PAGE_BITS) & (CPU_TLB_SIZE - 1);
target_ulong tlb_addr = env->tlb_table[mmu_idx][index].addr_write;
unsigned a_bits = get_alignment_bits(get_memop(oi));
uintptr_t haddr;
if (addr & ((1 << a_bits) - 1)) {
cpu_unaligned_access(ENV_GET_CPU(env), addr, MMU_DATA_STORE,
mmu_idx, retaddr);
}
/* If the TLB entry is for a different page, reload and try again. */
if ((addr & TARGET_PAGE_MASK)
!= (tlb_addr & (TARGET_PAGE_MASK | TLB_INVALID_MASK))) {
if (!VICTIM_TLB_HIT(addr_write, addr)) {
tlb_fill(ENV_GET_CPU(env), addr, DATA_SIZE, MMU_DATA_STORE,
mmu_idx, retaddr);
}
tlb_addr = env->tlb_table[mmu_idx][index].addr_write & ~TLB_INVALID_MASK;
}
/* Handle an IO access. */
if (unlikely(tlb_addr & ~TARGET_PAGE_MASK)) {
if ((addr & (DATA_SIZE - 1)) != 0) {
goto do_unaligned_access;
}
/* ??? Note that the io helpers always read data in the target
byte ordering. We should push the LE/BE request down into io. */
val = TGT_BE(val);
glue(io_write, SUFFIX)(env, mmu_idx, index, val, addr, retaddr);
return;
}
/* Handle slow unaligned access (it spans two pages or IO). */
if (DATA_SIZE > 1
&& unlikely((addr & ~TARGET_PAGE_MASK) + DATA_SIZE - 1
>= TARGET_PAGE_SIZE)) {
int i, index2;
target_ulong page2, tlb_addr2;
do_unaligned_access:
/* Ensure the second page is in the TLB. Note that the first page
is already guaranteed to be filled, and that the second page
cannot evict the first. */
page2 = (addr + DATA_SIZE) & TARGET_PAGE_MASK;
index2 = (page2 >> TARGET_PAGE_BITS) & (CPU_TLB_SIZE - 1);
tlb_addr2 = env->tlb_table[mmu_idx][index2].addr_write;
if (page2 != (tlb_addr2 & (TARGET_PAGE_MASK | TLB_INVALID_MASK))
&& !VICTIM_TLB_HIT(addr_write, page2)) {
tlb_fill(ENV_GET_CPU(env), page2, DATA_SIZE, MMU_DATA_STORE,
mmu_idx, retaddr);
}
/* XXX: not efficient, but simple */
/* This loop must go in the forward direction to avoid issues
with self-modifying code. */
for (i = 0; i < DATA_SIZE; ++i) {
/* Big-endian extract. */
uint8_t val8 = val >> (((DATA_SIZE - 1) * 8) - (i * 8));
glue(helper_ret_stb, MMUSUFFIX)(env, addr + i, val8,
oi, retaddr);
}
return;
}
haddr = addr + env->tlb_table[mmu_idx][index].addend;
glue(glue(st, SUFFIX), _be_p)((uint8_t *)haddr, val);
}
#endif /* DATA_SIZE > 1 */
#endif /* !defined(SOFTMMU_CODE_ACCESS) */
#undef READ_ACCESS_TYPE
#undef DATA_TYPE
#undef SUFFIX
#undef LSUFFIX
#undef DATA_SIZE
#undef ADDR_READ
#undef WORD_TYPE
#undef SDATA_TYPE
#undef USUFFIX
#undef SSUFFIX
#undef BSWAP
#undef helper_le_ld_name
#undef helper_be_ld_name
#undef helper_le_lds_name
#undef helper_be_lds_name
#undef helper_le_st_name
#undef helper_be_st_name
+9 -147
View File
@@ -25,29 +25,16 @@
#include "qemu/osdep.h"
#include "sysemu/accel.h"
#include "sysemu/tcg.h"
#include "sysemu/sysemu.h"
#include "qom/object.h"
#include "cpu.h"
#include "qemu-common.h"
#include "qom/cpu.h"
#include "sysemu/cpus.h"
#include "qemu/main-loop.h"
#include "tcg/tcg.h"
#include "qapi/error.h"
#include "qemu/error-report.h"
#include "hw/boards.h"
#include "qapi/qapi-builtin-visit.h"
typedef struct TCGState {
AccelState parent_obj;
bool mttcg_enabled;
unsigned long tb_size;
} TCGState;
#define TYPE_TCG_ACCEL ACCEL_CLASS_NAME("tcg")
#define TCG_STATE(obj) \
OBJECT_CHECK(TCGState, (obj), TYPE_TCG_ACCEL)
unsigned long tcg_tb_size;
#ifndef CONFIG_USER_ONLY
/* mask must never be zero, except for A20 change call */
static void tcg_handle_interrupt(CPUState *cpu, int mask)
{
@@ -64,7 +51,7 @@ static void tcg_handle_interrupt(CPUState *cpu, int mask)
if (!qemu_cpu_is_self(cpu)) {
qemu_cpu_kick(cpu);
} else {
atomic_set(&cpu_neg(cpu)->icount_decr.u16.high, -1);
cpu->icount_decr.u16.high = -1;
if (use_icount &&
!cpu->can_do_io
&& (mask & ~old_mask) != 0) {
@@ -72,154 +59,29 @@ static void tcg_handle_interrupt(CPUState *cpu, int mask)
}
}
}
/*
* We default to false if we know other options have been enabled
* which are currently incompatible with MTTCG. Otherwise when each
* guest (target) has been updated to support:
* - atomic instructions
* - memory ordering primitives (barriers)
* they can set the appropriate CONFIG flags in ${target}-softmmu.mak
*
* Once a guest architecture has been converted to the new primitives
* there are two remaining limitations to check.
*
* - The guest can't be oversized (e.g. 64 bit guest on 32 bit host)
* - The host must have a stronger memory order than the guest
*
* It may be possible in future to support strong guests on weak hosts
* but that will require tagging all load/stores in a guest with their
* implicit memory order requirements which would likely slow things
* down a lot.
*/
static bool check_tcg_memory_orders_compatible(void)
{
#if defined(TCG_GUEST_DEFAULT_MO) && defined(TCG_TARGET_DEFAULT_MO)
return (TCG_GUEST_DEFAULT_MO & ~TCG_TARGET_DEFAULT_MO) == 0;
#else
return false;
#endif
}
static bool default_mttcg_enabled(void)
{
if (use_icount || TCG_OVERSIZED_GUEST) {
return false;
} else {
#ifdef TARGET_SUPPORTS_MTTCG
return check_tcg_memory_orders_compatible();
#else
return false;
#endif
}
}
static void tcg_accel_instance_init(Object *obj)
{
TCGState *s = TCG_STATE(obj);
s->mttcg_enabled = default_mttcg_enabled();
}
static int tcg_init(MachineState *ms)
{
TCGState *s = TCG_STATE(current_accel());
tcg_exec_init(s->tb_size * 1024 * 1024);
tcg_exec_init(tcg_tb_size * 1024 * 1024);
cpu_interrupt_handler = tcg_handle_interrupt;
mttcg_enabled = s->mttcg_enabled;
return 0;
}
static char *tcg_get_thread(Object *obj, Error **errp)
{
TCGState *s = TCG_STATE(obj);
return g_strdup(s->mttcg_enabled ? "multi" : "single");
}
static void tcg_set_thread(Object *obj, const char *value, Error **errp)
{
TCGState *s = TCG_STATE(obj);
if (strcmp(value, "multi") == 0) {
if (TCG_OVERSIZED_GUEST) {
error_setg(errp, "No MTTCG when guest word size > hosts");
} else if (use_icount) {
error_setg(errp, "No MTTCG when icount is enabled");
} else {
#ifndef TARGET_SUPPORTS_MTTCG
warn_report("Guest not yet converted to MTTCG - "
"you may get unexpected results");
#endif
if (!check_tcg_memory_orders_compatible()) {
warn_report("Guest expects a stronger memory ordering "
"than the host provides");
error_printf("This may cause strange/hard to debug errors\n");
}
s->mttcg_enabled = true;
}
} else if (strcmp(value, "single") == 0) {
s->mttcg_enabled = false;
} else {
error_setg(errp, "Invalid 'thread' setting %s", value);
}
}
static void tcg_get_tb_size(Object *obj, Visitor *v,
const char *name, void *opaque,
Error **errp)
{
TCGState *s = TCG_STATE(obj);
uint32_t value = s->tb_size;
visit_type_uint32(v, name, &value, errp);
}
static void tcg_set_tb_size(Object *obj, Visitor *v,
const char *name, void *opaque,
Error **errp)
{
TCGState *s = TCG_STATE(obj);
Error *error = NULL;
uint32_t value;
visit_type_uint32(v, name, &value, &error);
if (error) {
error_propagate(errp, error);
return;
}
s->tb_size = value;
}
static void tcg_accel_class_init(ObjectClass *oc, void *data)
{
AccelClass *ac = ACCEL_CLASS(oc);
ac->name = "tcg";
ac->init_machine = tcg_init;
ac->allowed = &tcg_allowed;
object_class_property_add_str(oc, "thread",
tcg_get_thread,
tcg_set_thread,
NULL);
object_class_property_add(oc, "tb-size", "int",
tcg_get_tb_size, tcg_set_tb_size,
NULL, NULL, &error_abort);
object_class_property_set_description(oc, "tb-size",
"TCG translation block cache size", &error_abort);
}
#define TYPE_TCG_ACCEL ACCEL_CLASS_NAME("tcg")
static const TypeInfo tcg_accel_type = {
.name = TYPE_TCG_ACCEL,
.parent = TYPE_ACCEL,
.instance_init = tcg_accel_instance_init,
.class_init = tcg_accel_class_init,
.instance_size = sizeof(TCGState),
};
static void register_accel_types(void)
File diff suppressed because it is too large. Load diff
+2 -3
View File
@@ -30,7 +30,6 @@
#include "exec/tb-lookup.h"
#include "disas/disas.h"
#include "exec/log.h"
#include "tcg/tcg.h"
/* 32-bit helpers */
@@ -147,7 +146,7 @@ uint64_t HELPER(ctpop_i64)(uint64_t arg)
void *HELPER(lookup_tb_ptr)(CPUArchState *env)
{
CPUState *cpu = env_cpu(env);
CPUState *cpu = ENV_GET_CPU(env);
TranslationBlock *tb;
target_ulong cs_base, pc;
uint32_t flags;
@@ -166,5 +165,5 @@ void *HELPER(lookup_tb_ptr)(CPUArchState *env)
void HELPER(exit_atomic)(CPUArchState *env)
{
cpu_loop_exit_atomic(env_cpu(env), GETPC());
cpu_loop_exit_atomic(ENV_GET_CPU(env), GETPC());
}
-53
View File
@@ -125,19 +125,11 @@ GEN_ATOMIC_HELPERS(fetch_add)
GEN_ATOMIC_HELPERS(fetch_and)
GEN_ATOMIC_HELPERS(fetch_or)
GEN_ATOMIC_HELPERS(fetch_xor)
GEN_ATOMIC_HELPERS(fetch_smin)
GEN_ATOMIC_HELPERS(fetch_umin)
GEN_ATOMIC_HELPERS(fetch_smax)
GEN_ATOMIC_HELPERS(fetch_umax)
GEN_ATOMIC_HELPERS(add_fetch)
GEN_ATOMIC_HELPERS(and_fetch)
GEN_ATOMIC_HELPERS(or_fetch)
GEN_ATOMIC_HELPERS(xor_fetch)
GEN_ATOMIC_HELPERS(smin_fetch)
GEN_ATOMIC_HELPERS(umin_fetch)
GEN_ATOMIC_HELPERS(smax_fetch)
GEN_ATOMIC_HELPERS(umax_fetch)
GEN_ATOMIC_HELPERS(xchg)
@@ -200,45 +192,17 @@ DEF_HELPER_FLAGS_4(gvec_ussub16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ussub32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ussub64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smin8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smin16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smin32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smin64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smax8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smax16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smax32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_smax64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umin8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umin16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umin32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umin64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umax8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umax16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umax32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_umax64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_neg8, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_neg16, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_neg32, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_neg64, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_abs8, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_abs16, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_abs32, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_abs64, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_not, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_and, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_or, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_xor, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_andc, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_orc, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_nand, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_nor, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_eqv, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_ands, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
DEF_HELPER_FLAGS_4(gvec_xors, TCG_CALL_NO_RWG, void, ptr, ptr, i64, i32)
@@ -259,21 +223,6 @@ DEF_HELPER_FLAGS_3(gvec_sar16i, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_sar32i, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_3(gvec_sar64i, TCG_CALL_NO_RWG, void, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_shl8v, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_shl16v, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_shl32v, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_shl64v, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_shr8v, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_shr16v, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_shr32v, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_shr64v, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_sar8v, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_sar16v, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_sar32v, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_sar64v, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_eq8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_eq16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_eq32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
@@ -303,5 +252,3 @@ DEF_HELPER_FLAGS_4(gvec_leu8, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_leu16, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_leu32, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_4(gvec_leu64, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, i32)
DEF_HELPER_FLAGS_5(gvec_bitsel, TCG_CALL_NO_RWG, void, ptr, ptr, ptr, ptr, i32)
+1 -1
View File
@@ -1,4 +1,4 @@
# See docs/devel/tracing.txt for syntax documentation.
# Trace events for debugging and performance instrumentation
# TCG related tracing (mostly disabled by default)
# cpu-exec.c
+503 -933
View File
File diff suppressed because it is too large. Load diff
+6 -9
View File
@@ -6,7 +6,7 @@
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -23,14 +23,11 @@
/* translate-all.c */
struct page_collection *page_collection_lock(tb_page_addr_t start,
tb_page_addr_t end);
void page_collection_unlock(struct page_collection *set);
void tb_invalidate_phys_page_fast(struct page_collection *pages,
tb_page_addr_t start, int len,
uintptr_t retaddr);
void tb_invalidate_phys_page_range(tb_page_addr_t start, tb_page_addr_t end);
void tb_check_watchpoint(CPUState *cpu, uintptr_t retaddr);
void tb_invalidate_phys_page_fast(tb_page_addr_t start, int len);
void tb_invalidate_phys_page_range(tb_page_addr_t start, tb_page_addr_t end,
int is_cpu_write_access);
void tb_invalidate_phys_range(tb_page_addr_t start, tb_page_addr_t end);
void tb_check_watchpoint(CPUState *cpu);
#ifdef CONFIG_USER_ONLY
int page_unprotect(target_ulong address, uintptr_t pc);
+23 -33
View File
@@ -8,6 +8,7 @@
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "qemu/error-report.h"
#include "cpu.h"
#include "tcg/tcg.h"
@@ -16,7 +17,6 @@
#include "exec/gen-icount.h"
#include "exec/log.h"
#include "exec/translator.h"
#include "exec/plugin-gen.h"
/* Pairs with tcg_clear_temp_count.
To be called by #TranslatorOps.{translate_insn,tb_stop} if
@@ -32,10 +32,9 @@ void translator_loop_temp_check(DisasContextBase *db)
}
void translator_loop(const TranslatorOps *ops, DisasContextBase *db,
CPUState *cpu, TranslationBlock *tb, int max_insns)
CPUState *cpu, TranslationBlock *tb)
{
int bp_insn = 0;
bool plugin_enabled;
int max_insns;
/* Initialize DisasContext */
db->tb = tb;
@@ -43,10 +42,21 @@ void translator_loop(const TranslatorOps *ops, DisasContextBase *db,
db->pc_next = db->pc_first;
db->is_jmp = DISAS_NEXT;
db->num_insns = 0;
db->max_insns = max_insns;
db->singlestep_enabled = cpu->singlestep_enabled;
ops->init_disas_context(db, cpu);
/* Instruction counting */
max_insns = tb_cflags(db->tb) & CF_COUNT_MASK;
if (max_insns == 0) {
max_insns = CF_COUNT_MASK;
}
if (max_insns > TCG_MAX_INSNS) {
max_insns = TCG_MAX_INSNS;
}
if (db->singlestep_enabled || singlestep) {
max_insns = 1;
}
max_insns = ops->init_disas_context(db, cpu, max_insns);
tcg_debug_assert(db->is_jmp == DISAS_NEXT); /* no early exit */
/* Reset the temp count so that we can identify leaks */
@@ -57,25 +67,17 @@ void translator_loop(const TranslatorOps *ops, DisasContextBase *db,
ops->tb_start(db, cpu);
tcg_debug_assert(db->is_jmp == DISAS_NEXT); /* no early exit */
plugin_enabled = plugin_gen_tb_start(cpu, tb);
while (true) {
db->num_insns++;
ops->insn_start(db, cpu);
tcg_debug_assert(db->is_jmp == DISAS_NEXT); /* no early exit */
if (plugin_enabled) {
plugin_gen_insn_start(cpu, db);
}
/* Pass breakpoint hits to target for further processing */
if (!db->singlestep_enabled
&& unlikely(!QTAILQ_EMPTY(&cpu->breakpoints))) {
if (unlikely(!QTAILQ_EMPTY(&cpu->breakpoints))) {
CPUBreakpoint *bp;
QTAILQ_FOREACH(bp, &cpu->breakpoints, entry) {
if (bp->pc == db->pc_next) {
if (ops->breakpoint_check(db, cpu, bp)) {
bp_insn = 1;
break;
}
}
@@ -93,11 +95,11 @@ void translator_loop(const TranslatorOps *ops, DisasContextBase *db,
update db->pc_next and db->is_jmp to indicate what should be
done next -- either exiting this loop or locate the start of
the next instruction. */
if (db->num_insns == db->max_insns
&& (tb_cflags(db->tb) & CF_LAST_IO)) {
if (db->num_insns == max_insns && (tb_cflags(db->tb) & CF_LAST_IO)) {
/* Accept I/O on the last instruction. */
gen_io_start();
ops->translate_insn(db, cpu);
gen_io_end();
} else {
ops->translate_insn(db, cpu);
}
@@ -107,17 +109,9 @@ void translator_loop(const TranslatorOps *ops, DisasContextBase *db,
break;
}
/*
* We can't instrument after instructions that change control
* flow although this only really affects post-load operations.
*/
if (plugin_enabled) {
plugin_gen_insn_end();
}
/* Stop translation if the output buffer is full,
or we have executed all of the allowed instructions. */
if (tcg_op_buf_full() || db->num_insns >= db->max_insns) {
if (tcg_op_buf_full() || db->num_insns >= max_insns) {
db->is_jmp = DISAS_TOO_MANY;
break;
}
@@ -125,11 +119,7 @@ void translator_loop(const TranslatorOps *ops, DisasContextBase *db,
/* Emit code to exit the TB, as indicated by db->is_jmp. */
ops->tb_stop(db, cpu);
gen_tb_end(db->tb, db->num_insns - bp_insn);
if (plugin_enabled) {
plugin_gen_tb_end(cpu);
}
gen_tb_end(db->tb, db->num_insns);
/* The disas_log hook may use these values rather than recompute. */
db->tb->size = db->pc_next - db->pc_first;
@@ -138,11 +128,11 @@ void translator_loop(const TranslatorOps *ops, DisasContextBase *db,
#ifdef DEBUG_DISAS
if (qemu_loglevel_mask(CPU_LOG_TB_IN_ASM)
&& qemu_log_in_addr_range(db->pc_first)) {
FILE *logfile = qemu_log_lock();
qemu_log_lock();
qemu_log("----------------\n");
ops->disas_log(db, cpu);
qemu_log("\n");
qemu_log_unlock(logfile);
qemu_log_unlock();
}
#endif
}
+2 -4
View File
@@ -1,9 +1,7 @@
#include "qemu/osdep.h"
#include "hw/core/cpu.h"
#include "qemu-common.h"
#include "qom/cpu.h"
#include "sysemu/replay.h"
#include "sysemu/sysemu.h"
bool enable_cpu_pm = false;
void cpu_resume(CPUState *cpu)
{
+64 -460
View File
@@ -6,7 +6,7 @@
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -20,14 +20,11 @@
#include "cpu.h"
#include "disas/disas.h"
#include "exec/exec-all.h"
#include "tcg/tcg.h"
#include "tcg.h"
#include "qemu/bitops.h"
#include "exec/cpu_ldst.h"
#include "translate-all.h"
#include "exec/helper-proto.h"
#include "qemu/atomic128.h"
#include "trace-root.h"
#include "trace/mem.h"
#undef EAX
#undef ECX
@@ -65,57 +62,28 @@ static inline int handle_cpu_signal(uintptr_t pc, siginfo_t *info,
{
CPUState *cpu = current_cpu;
CPUClass *cc;
int ret;
unsigned long address = (unsigned long)info->si_addr;
MMUAccessType access_type = is_write ? MMU_DATA_STORE : MMU_DATA_LOAD;
switch (helper_retaddr) {
default:
/*
* Fault during host memory operation within a helper function.
* The helper's host return address, saved here, gives us a
* pointer into the generated code that will unwind to the
* correct guest pc.
*/
/* We must handle PC addresses from two different sources:
* a call return address and a signal frame address.
*
* Within cpu_restore_state_from_tb we assume the former and adjust
* the address by -GETPC_ADJ so that the address is within the call
* insn so that addr does not accidentally match the beginning of the
* next guest insn.
*
* However, when the PC comes from the signal frame, it points to
* the actual faulting host insn and not a call insn. Subtracting
* GETPC_ADJ in that case may accidentally match the previous guest insn.
*
* So for the later case, adjust forward to compensate for what
* will be done later by cpu_restore_state_from_tb.
*/
if (helper_retaddr) {
pc = helper_retaddr;
break;
case 0:
/*
* Fault during host memory operation within generated code.
* (Or, a unrelated bug within qemu, but we can't tell from here).
*
* We take the host pc from the signal frame. However, we cannot
* use that value directly. Within cpu_restore_state_from_tb, we
* assume PC comes from GETPC(), as used by the helper functions,
* so we adjust the address by -GETPC_ADJ to form an address that
* is within the call insn, so that the address does not accidentially
* match the beginning of the next guest insn. However, when the
* pc comes from the signal frame it points to the actual faulting
* host memory insn and not the return from a call insn.
*
* Therefore, adjust to compensate for what will be done later
* by cpu_restore_state_from_tb.
*/
} else {
pc += GETPC_ADJ;
break;
case 1:
/*
* Fault during host read for translation, or loosely, "execution".
*
* The guest pc is already pointing to the start of the TB for which
* code is being generated. If the guest translator manages the
* page crossings correctly, this is exactly the correct address
* (and if the translator doesn't handle page boundaries correctly
* there's little we can do about that here). Therefore, do not
* trigger the unwinder.
*
* Like tb_gen_code, release the memory lock before cpu_loop_exit.
*/
pc = 0;
access_type = MMU_INST_FETCH;
mmap_unlock();
break;
}
/* For synchronous signals we expect to be coming from the vCPU
@@ -165,7 +133,7 @@ static inline int handle_cpu_signal(uintptr_t pc, siginfo_t *info,
* currently executing TB was modified and must be exited
* immediately. Clear helper_retaddr for next execution.
*/
clear_helper_retaddr();
helper_retaddr = 0;
cpu_exit_tb_from_sighandler(cpu, old_set);
/* NORETURN */
@@ -178,48 +146,35 @@ static inline int handle_cpu_signal(uintptr_t pc, siginfo_t *info,
are still valid segv ones */
address = h2g_nocheck(address);
/*
* There is no way the target can handle this other than raising
* an exception. Undo signal and retaddr state prior to longjmp.
*/
sigprocmask(SIG_SETMASK, old_set, NULL);
clear_helper_retaddr();
cc = CPU_GET_CLASS(cpu);
cc->tlb_fill(cpu, address, 0, access_type, MMU_USER_IDX, false, pc);
g_assert_not_reached();
}
/* see if it is an MMU fault */
g_assert(cc->handle_mmu_fault);
ret = cc->handle_mmu_fault(cpu, address, 0, is_write, MMU_USER_IDX);
void *probe_access(CPUArchState *env, target_ulong addr, int size,
MMUAccessType access_type, int mmu_idx, uintptr_t retaddr)
{
int flags;
g_assert(-(addr | TARGET_PAGE_MASK) >= size);
switch (access_type) {
case MMU_DATA_STORE:
flags = PAGE_WRITE;
break;
case MMU_DATA_LOAD:
flags = PAGE_READ;
break;
case MMU_INST_FETCH:
flags = PAGE_EXEC;
break;
default:
g_assert_not_reached();
if (ret == 0) {
/* The MMU fault was handled without causing real CPU fault.
* Retain helper_retaddr for a possible second fault.
*/
return 1;
}
if (!guest_addr_valid(addr) || page_check_range(addr, size, flags) < 0) {
CPUState *cpu = env_cpu(env);
CPUClass *cc = CPU_GET_CLASS(cpu);
cc->tlb_fill(cpu, addr, size, access_type, MMU_USER_IDX, false,
retaddr);
g_assert_not_reached();
/* All other paths lead to cpu_exit; clear helper_retaddr
* for next execution.
*/
helper_retaddr = 0;
if (ret < 0) {
return 0; /* not an MMU fault */
}
return size ? g2h(addr) : NULL;
/* Now we have a real cpu fault. */
cpu_restore_state(cpu, pc, true);
sigprocmask(SIG_SETMASK, old_set, NULL);
cpu_loop_exit(cpu);
/* never comes here */
return 1;
}
#if defined(__i386__)
@@ -523,66 +478,28 @@ int cpu_signal_handler(int host_signum, void *pinfo,
#elif defined(__aarch64__)
#ifndef ESR_MAGIC
/* Pre-3.16 kernel headers don't have these, so provide fallback definitions */
#define ESR_MAGIC 0x45535201
struct esr_context {
struct _aarch64_ctx head;
uint64_t esr;
};
#endif
static inline struct _aarch64_ctx *first_ctx(ucontext_t *uc)
{
return (struct _aarch64_ctx *)&uc->uc_mcontext.__reserved;
}
static inline struct _aarch64_ctx *next_ctx(struct _aarch64_ctx *hdr)
{
return (struct _aarch64_ctx *)((char *)hdr + hdr->size);
}
int cpu_signal_handler(int host_signum, void *pinfo, void *puc)
{
siginfo_t *info = pinfo;
ucontext_t *uc = puc;
uintptr_t pc = uc->uc_mcontext.pc;
uint32_t insn = *(uint32_t *)pc;
bool is_write;
struct _aarch64_ctx *hdr;
struct esr_context const *esrctx = NULL;
/* Find the esr_context, which has the WnR bit in it */
for (hdr = first_ctx(uc); hdr->magic; hdr = next_ctx(hdr)) {
if (hdr->magic == ESR_MAGIC) {
esrctx = (struct esr_context const *)hdr;
break;
}
}
/* XXX: need kernel patch to get write flag faster. */
is_write = ( (insn & 0xbfff0000) == 0x0c000000 /* C3.3.1 */
|| (insn & 0xbfe00000) == 0x0c800000 /* C3.3.2 */
|| (insn & 0xbfdf0000) == 0x0d000000 /* C3.3.3 */
|| (insn & 0xbfc00000) == 0x0d800000 /* C3.3.4 */
|| (insn & 0x3f400000) == 0x08000000 /* C3.3.6 */
|| (insn & 0x3bc00000) == 0x39000000 /* C3.3.13 */
|| (insn & 0x3fc00000) == 0x3d800000 /* ... 128bit */
/* Ingore bits 10, 11 & 21, controlling indexing. */
|| (insn & 0x3bc00000) == 0x38000000 /* C3.3.8-12 */
|| (insn & 0x3fe00000) == 0x3c800000 /* ... 128bit */
/* Ignore bits 23 & 24, controlling indexing. */
|| (insn & 0x3a400000) == 0x28000000); /* C3.3.7,14-16 */
if (esrctx) {
/* For data aborts ESR.EC is 0b10010x: then bit 6 is the WnR bit */
uint64_t esr = esrctx->esr;
is_write = extract32(esr, 27, 5) == 0x12 && extract32(esr, 6, 1) == 1;
} else {
/*
* Fall back to parsing instructions; will only be needed
* for really ancient (pre-3.16) kernels.
*/
uint32_t insn = *(uint32_t *)pc;
is_write = ((insn & 0xbfff0000) == 0x0c000000 /* C3.3.1 */
|| (insn & 0xbfe00000) == 0x0c800000 /* C3.3.2 */
|| (insn & 0xbfdf0000) == 0x0d000000 /* C3.3.3 */
|| (insn & 0xbfc00000) == 0x0d800000 /* C3.3.4 */
|| (insn & 0x3f400000) == 0x08000000 /* C3.3.6 */
|| (insn & 0x3bc00000) == 0x39000000 /* C3.3.13 */
|| (insn & 0x3fc00000) == 0x3d800000 /* ... 128bit */
/* Ignore bits 10, 11 & 21, controlling indexing. */
|| (insn & 0x3bc00000) == 0x38000000 /* C3.3.8-12 */
|| (insn & 0x3fe00000) == 0x3c800000 /* ... 128bit */
/* Ignore bits 23 & 24, controlling indexing. */
|| (insn & 0x3a400000) == 0x28000000); /* C3.3.7,14-16 */
}
return handle_cpu_signal(pc, info, is_write, &uc->uc_sigmask);
}
@@ -653,81 +570,6 @@ int cpu_signal_handler(int host_signum, void *pinfo,
return handle_cpu_signal(pc, info, is_write, &uc->uc_sigmask);
}
#elif defined(__riscv)
int cpu_signal_handler(int host_signum, void *pinfo,
void *puc)
{
siginfo_t *info = pinfo;
ucontext_t *uc = puc;
greg_t pc = uc->uc_mcontext.__gregs[REG_PC];
uint32_t insn = *(uint32_t *)pc;
int is_write = 0;
/* Detect store by reading the instruction at the program
counter. Note: we currently only generate 32-bit
instructions so we thus only detect 32-bit stores */
switch (((insn >> 0) & 0b11)) {
case 3:
switch (((insn >> 2) & 0b11111)) {
case 8:
switch (((insn >> 12) & 0b111)) {
case 0: /* sb */
case 1: /* sh */
case 2: /* sw */
case 3: /* sd */
case 4: /* sq */
is_write = 1;
break;
default:
break;
}
break;
case 9:
switch (((insn >> 12) & 0b111)) {
case 2: /* fsw */
case 3: /* fsd */
case 4: /* fsq */
is_write = 1;
break;
default:
break;
}
break;
default:
break;
}
}
/* Check for compressed instructions */
switch (((insn >> 13) & 0b111)) {
case 7:
switch (insn & 0b11) {
case 0: /*c.sd */
case 2: /* c.sdsp */
is_write = 1;
break;
default:
break;
}
break;
case 6:
switch (insn & 0b11) {
case 0: /* c.sw */
case 3: /* c.swsp */
is_write = 1;
break;
default:
break;
}
break;
default:
break;
}
return handle_cpu_signal(pc, info, is_write, &uc->uc_sigmask);
}
#else
#error host CPU specific signal handler needed
@@ -736,264 +578,26 @@ int cpu_signal_handler(int host_signum, void *pinfo,
/* The softmmu versions of these helpers are in cputlb.c. */
uint32_t cpu_ldub_data(CPUArchState *env, abi_ptr ptr)
{
uint32_t ret;
uint16_t meminfo = trace_mem_get_info(MO_UB, MMU_USER_IDX, false);
trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo);
ret = ldub_p(g2h(ptr));
qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo);
return ret;
}
int cpu_ldsb_data(CPUArchState *env, abi_ptr ptr)
{
int ret;
uint16_t meminfo = trace_mem_get_info(MO_SB, MMU_USER_IDX, false);
trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo);
ret = ldsb_p(g2h(ptr));
qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo);
return ret;
}
uint32_t cpu_lduw_data(CPUArchState *env, abi_ptr ptr)
{
uint32_t ret;
uint16_t meminfo = trace_mem_get_info(MO_TEUW, MMU_USER_IDX, false);
trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo);
ret = lduw_p(g2h(ptr));
qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo);
return ret;
}
int cpu_ldsw_data(CPUArchState *env, abi_ptr ptr)
{
int ret;
uint16_t meminfo = trace_mem_get_info(MO_TESW, MMU_USER_IDX, false);
trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo);
ret = ldsw_p(g2h(ptr));
qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo);
return ret;
}
uint32_t cpu_ldl_data(CPUArchState *env, abi_ptr ptr)
{
uint32_t ret;
uint16_t meminfo = trace_mem_get_info(MO_TEUL, MMU_USER_IDX, false);
trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo);
ret = ldl_p(g2h(ptr));
qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo);
return ret;
}
uint64_t cpu_ldq_data(CPUArchState *env, abi_ptr ptr)
{
uint64_t ret;
uint16_t meminfo = trace_mem_get_info(MO_TEQ, MMU_USER_IDX, false);
trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo);
ret = ldq_p(g2h(ptr));
qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo);
return ret;
}
uint32_t cpu_ldub_data_ra(CPUArchState *env, abi_ptr ptr, uintptr_t retaddr)
{
uint32_t ret;
set_helper_retaddr(retaddr);
ret = cpu_ldub_data(env, ptr);
clear_helper_retaddr();
return ret;
}
int cpu_ldsb_data_ra(CPUArchState *env, abi_ptr ptr, uintptr_t retaddr)
{
int ret;
set_helper_retaddr(retaddr);
ret = cpu_ldsb_data(env, ptr);
clear_helper_retaddr();
return ret;
}
uint32_t cpu_lduw_data_ra(CPUArchState *env, abi_ptr ptr, uintptr_t retaddr)
{
uint32_t ret;
set_helper_retaddr(retaddr);
ret = cpu_lduw_data(env, ptr);
clear_helper_retaddr();
return ret;
}
int cpu_ldsw_data_ra(CPUArchState *env, abi_ptr ptr, uintptr_t retaddr)
{
int ret;
set_helper_retaddr(retaddr);
ret = cpu_ldsw_data(env, ptr);
clear_helper_retaddr();
return ret;
}
uint32_t cpu_ldl_data_ra(CPUArchState *env, abi_ptr ptr, uintptr_t retaddr)
{
uint32_t ret;
set_helper_retaddr(retaddr);
ret = cpu_ldl_data(env, ptr);
clear_helper_retaddr();
return ret;
}
uint64_t cpu_ldq_data_ra(CPUArchState *env, abi_ptr ptr, uintptr_t retaddr)
{
uint64_t ret;
set_helper_retaddr(retaddr);
ret = cpu_ldq_data(env, ptr);
clear_helper_retaddr();
return ret;
}
void cpu_stb_data(CPUArchState *env, abi_ptr ptr, uint32_t val)
{
uint16_t meminfo = trace_mem_get_info(MO_UB, MMU_USER_IDX, true);
trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo);
stb_p(g2h(ptr), val);
qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo);
}
void cpu_stw_data(CPUArchState *env, abi_ptr ptr, uint32_t val)
{
uint16_t meminfo = trace_mem_get_info(MO_TEUW, MMU_USER_IDX, true);
trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo);
stw_p(g2h(ptr), val);
qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo);
}
void cpu_stl_data(CPUArchState *env, abi_ptr ptr, uint32_t val)
{
uint16_t meminfo = trace_mem_get_info(MO_TEUL, MMU_USER_IDX, true);
trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo);
stl_p(g2h(ptr), val);
qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo);
}
void cpu_stq_data(CPUArchState *env, abi_ptr ptr, uint64_t val)
{
uint16_t meminfo = trace_mem_get_info(MO_TEQ, MMU_USER_IDX, true);
trace_guest_mem_before_exec(env_cpu(env), ptr, meminfo);
stq_p(g2h(ptr), val);
qemu_plugin_vcpu_mem_cb(env_cpu(env), ptr, meminfo);
}
void cpu_stb_data_ra(CPUArchState *env, abi_ptr ptr,
uint32_t val, uintptr_t retaddr)
{
set_helper_retaddr(retaddr);
cpu_stb_data(env, ptr, val);
clear_helper_retaddr();
}
void cpu_stw_data_ra(CPUArchState *env, abi_ptr ptr,
uint32_t val, uintptr_t retaddr)
{
set_helper_retaddr(retaddr);
cpu_stw_data(env, ptr, val);
clear_helper_retaddr();
}
void cpu_stl_data_ra(CPUArchState *env, abi_ptr ptr,
uint32_t val, uintptr_t retaddr)
{
set_helper_retaddr(retaddr);
cpu_stl_data(env, ptr, val);
clear_helper_retaddr();
}
void cpu_stq_data_ra(CPUArchState *env, abi_ptr ptr,
uint64_t val, uintptr_t retaddr)
{
set_helper_retaddr(retaddr);
cpu_stq_data(env, ptr, val);
clear_helper_retaddr();
}
uint32_t cpu_ldub_code(CPUArchState *env, abi_ptr ptr)
{
uint32_t ret;
set_helper_retaddr(1);
ret = ldub_p(g2h(ptr));
clear_helper_retaddr();
return ret;
}
uint32_t cpu_lduw_code(CPUArchState *env, abi_ptr ptr)
{
uint32_t ret;
set_helper_retaddr(1);
ret = lduw_p(g2h(ptr));
clear_helper_retaddr();
return ret;
}
uint32_t cpu_ldl_code(CPUArchState *env, abi_ptr ptr)
{
uint32_t ret;
set_helper_retaddr(1);
ret = ldl_p(g2h(ptr));
clear_helper_retaddr();
return ret;
}
uint64_t cpu_ldq_code(CPUArchState *env, abi_ptr ptr)
{
uint64_t ret;
set_helper_retaddr(1);
ret = ldq_p(g2h(ptr));
clear_helper_retaddr();
return ret;
}
/* Do not allow unaligned operations to proceed. Return the host address. */
static void *atomic_mmu_lookup(CPUArchState *env, target_ulong addr,
int size, uintptr_t retaddr)
{
/* Enforce qemu required alignment. */
if (unlikely(addr & (size - 1))) {
cpu_loop_exit_atomic(env_cpu(env), retaddr);
cpu_loop_exit_atomic(ENV_GET_CPU(env), retaddr);
}
void *ret = g2h(addr);
set_helper_retaddr(retaddr);
return ret;
helper_retaddr = retaddr;
return g2h(addr);
}
/* Macro to call the above, with local variables from the use context. */
#define ATOMIC_MMU_DECLS do {} while (0)
#define ATOMIC_MMU_LOOKUP atomic_mmu_lookup(env, addr, DATA_SIZE, GETPC())
#define ATOMIC_MMU_CLEANUP do { clear_helper_retaddr(); } while (0)
#define ATOMIC_MMU_IDX MMU_USER_IDX
#define ATOMIC_MMU_CLEANUP do { helper_retaddr = 0; } while (0)
#define ATOMIC_NAME(X) HELPER(glue(glue(atomic_ ## X, SUFFIX), END))
#define EXTRA_ARGS
#include "atomic_common.inc.c"
#define DATA_SIZE 1
#include "atomic_template.h"
@@ -1011,7 +615,7 @@ static void *atomic_mmu_lookup(CPUArchState *env, target_ulong addr,
/* The following is only callable from other helpers, and matches up
with the softmmu version. */
#if HAVE_ATOMIC128 || HAVE_CMPXCHG128
#ifdef CONFIG_ATOMIC128
#undef EXTRA_ARGS
#undef ATOMIC_NAME
@@ -1024,4 +628,4 @@ static void *atomic_mmu_lookup(CPUArchState *env, target_ulong addr,
#define DATA_SIZE 16
#include "atomic_template.h"
#endif
#endif /* CONFIG_ATOMIC128 */
+19 -15
View File
@@ -22,13 +22,13 @@
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "cpu.h"
#include "sysemu/sysemu.h"
#include "sysemu/arch_init.h"
#include "hw/pci/pci.h"
#include "hw/audio/soundhw.h"
#include "qapi/qapi-commands-misc.h"
#include "qapi/error.h"
#include "qemu/config-file.h"
#include "qemu/error-report.h"
#include "hw/acpi/acpi.h"
@@ -38,10 +38,6 @@
int graphic_width = 1024;
int graphic_height = 768;
int graphic_depth = 8;
#elif defined(TARGET_M68K)
int graphic_width = 800;
int graphic_height = 600;
int graphic_depth = 8;
#else
int graphic_width = 800;
int graphic_height = 600;
@@ -55,14 +51,14 @@ int graphic_depth = 32;
#define QEMU_ARCH QEMU_ARCH_ARM
#elif defined(TARGET_CRIS)
#define QEMU_ARCH QEMU_ARCH_CRIS
#elif defined(TARGET_HPPA)
#define QEMU_ARCH QEMU_ARCH_HPPA
#elif defined(TARGET_I386)
#define QEMU_ARCH QEMU_ARCH_I386
#elif defined(TARGET_LM32)
#define QEMU_ARCH QEMU_ARCH_LM32
#elif defined(TARGET_HPPA)
#define QEMU_ARCH QEMU_ARCH_HPPA
#elif defined(TARGET_M68K)
#define QEMU_ARCH QEMU_ARCH_M68K
#elif defined(TARGET_LM32)
#define QEMU_ARCH QEMU_ARCH_LM32
#elif defined(TARGET_MICROBLAZE)
#define QEMU_ARCH QEMU_ARCH_MICROBLAZE
#elif defined(TARGET_MIPS)
@@ -77,20 +73,18 @@ int graphic_depth = 32;
#define QEMU_ARCH QEMU_ARCH_PPC
#elif defined(TARGET_RISCV)
#define QEMU_ARCH QEMU_ARCH_RISCV
#elif defined(TARGET_RX)
#define QEMU_ARCH QEMU_ARCH_RX
#elif defined(TARGET_S390X)
#define QEMU_ARCH QEMU_ARCH_S390X
#elif defined(TARGET_SH4)
#define QEMU_ARCH QEMU_ARCH_SH4
#elif defined(TARGET_SPARC)
#define QEMU_ARCH QEMU_ARCH_SPARC
#elif defined(TARGET_TRICORE)
#define QEMU_ARCH QEMU_ARCH_TRICORE
#elif defined(TARGET_UNICORE32)
#define QEMU_ARCH QEMU_ARCH_UNICORE32
#elif defined(TARGET_XTENSA)
#define QEMU_ARCH QEMU_ARCH_XTENSA
#elif defined(TARGET_UNICORE32)
#define QEMU_ARCH QEMU_ARCH_UNICORE32
#elif defined(TARGET_TRICORE)
#define QEMU_ARCH QEMU_ARCH_TRICORE
#endif
const uint32_t arch_type = QEMU_ARCH;
@@ -112,3 +106,13 @@ int xen_available(void)
return 0;
#endif
}
TargetInfo *qmp_query_target(Error **errp)
{
TargetInfo *info = g_malloc0(sizeof(*info));
info->arch = g_strdup(TARGET_NAME);
return info;
}
+2 -1
View File
@@ -1,7 +1,8 @@
common-obj-y = audio.o audio_legacy.o noaudio.o wavaudio.o mixeng.o
common-obj-y = audio.o noaudio.o wavaudio.o mixeng.o
common-obj-$(CONFIG_SPICE) += spiceaudio.o
common-obj-$(CONFIG_AUDIO_COREAUDIO) += coreaudio.o
common-obj-$(CONFIG_AUDIO_DSOUND) += dsoundaudio.o
common-obj-$(CONFIG_AUDIO_PT_INT) += audio_pt_int.o
common-obj-$(CONFIG_AUDIO_WIN_INT) += audio_win_int.o
common-obj-y += wavcapture.o
+540 -258
View File
File diff suppressed because it is too large. Load diff
+820 -902
View File
File diff suppressed because it is too large. Load diff
+35 -42
View File
@@ -26,32 +26,30 @@
#define QEMU_AUDIO_H
#include "qemu/queue.h"
#include "qapi/qapi-types-audio.h"
#include "hw/qdev-properties.h"
typedef void (*audio_callback_fn) (void *opaque, int avail);
typedef enum {
AUD_FMT_U8,
AUD_FMT_S8,
AUD_FMT_U16,
AUD_FMT_S16,
AUD_FMT_U32,
AUD_FMT_S32
} audfmt_e;
#ifdef HOST_WORDS_BIGENDIAN
#define AUDIO_HOST_ENDIANNESS 1
#else
#define AUDIO_HOST_ENDIANNESS 0
#endif
typedef struct audsettings {
struct audsettings {
int freq;
int nchannels;
AudioFormat fmt;
audfmt_e fmt;
int endianness;
} audsettings;
audsettings audiodev_to_audsettings(AudiodevPerDirectionOptions *pdo);
int audioformat_bytes_per_sample(AudioFormat fmt);
int audio_buffer_frames(AudiodevPerDirectionOptions *pdo,
audsettings *as, int def_usecs);
int audio_buffer_samples(AudiodevPerDirectionOptions *pdo,
audsettings *as, int def_usecs);
int audio_buffer_bytes(AudiodevPerDirectionOptions *pdo,
audsettings *as, int def_usecs);
};
typedef enum {
AUD_CNOTIFY_ENABLE,
@@ -79,10 +77,8 @@ typedef struct SWVoiceOut SWVoiceOut;
typedef struct CaptureVoiceOut CaptureVoiceOut;
typedef struct SWVoiceIn SWVoiceIn;
typedef struct AudioState AudioState;
typedef struct QEMUSoundCard {
char *name;
AudioState *state;
QLIST_ENTRY (QEMUSoundCard) entries;
} QEMUSoundCard;
@@ -93,10 +89,10 @@ typedef struct QEMUAudioTimeStamp {
void AUD_vlog (const char *cap, const char *fmt, va_list ap) GCC_FMT_ATTR(2, 0);
void AUD_log (const char *cap, const char *fmt, ...) GCC_FMT_ATTR(2, 3);
void AUD_help (void);
void AUD_register_card (const char *name, QEMUSoundCard *card);
void AUD_remove_card (QEMUSoundCard *card);
CaptureVoiceOut *AUD_add_capture(
AudioState *s,
CaptureVoiceOut *AUD_add_capture (
struct audsettings *as,
struct audio_capture_ops *ops,
void *opaque
@@ -113,7 +109,7 @@ SWVoiceOut *AUD_open_out (
);
void AUD_close_out (QEMUSoundCard *card, SWVoiceOut *sw);
size_t AUD_write (SWVoiceOut *sw, void *pcm_buf, size_t size);
int AUD_write (SWVoiceOut *sw, void *pcm_buf, int size);
int AUD_get_buffer_size_out (SWVoiceOut *sw);
void AUD_set_active_out (SWVoiceOut *sw, int on);
int AUD_is_active_out (SWVoiceOut *sw);
@@ -124,16 +120,6 @@ uint64_t AUD_get_elapsed_usec_out (SWVoiceOut *sw, QEMUAudioTimeStamp *ts);
void AUD_set_volume_out (SWVoiceOut *sw, int mute, uint8_t lvol, uint8_t rvol);
void AUD_set_volume_in (SWVoiceIn *sw, int mute, uint8_t lvol, uint8_t rvol);
#define AUDIO_MAX_CHANNELS 16
typedef struct Volume {
bool mute;
int channels;
uint8_t vol[AUDIO_MAX_CHANNELS];
} Volume;
void audio_set_volume_out(SWVoiceOut *sw, Volume *vol);
void audio_set_volume_in(SWVoiceIn *sw, Volume *vol);
SWVoiceIn *AUD_open_in (
QEMUSoundCard *card,
SWVoiceIn *sw,
@@ -144,7 +130,7 @@ SWVoiceIn *AUD_open_in (
);
void AUD_close_in (QEMUSoundCard *card, SWVoiceIn *sw);
size_t AUD_read (SWVoiceIn *sw, void *pcm_buf, size_t size);
int AUD_read (SWVoiceIn *sw, void *pcm_buf, int size);
void AUD_set_active_in (SWVoiceIn *sw, int on);
int AUD_is_active_in (SWVoiceIn *sw);
@@ -157,8 +143,25 @@ static inline void *advance (void *p, int incr)
return (d + incr);
}
int wav_start_capture(AudioState *state, CaptureState *s, const char *path,
int freq, int bits, int nchannels);
#ifdef __GNUC__
#define audio_MIN(a, b) ( __extension__ ({ \
__typeof (a) ta = a; \
__typeof (b) tb = b; \
((ta)>(tb)?(tb):(ta)); \
}))
#define audio_MAX(a, b) ( __extension__ ({ \
__typeof (a) ta = a; \
__typeof (b) tb = b; \
((ta)<(tb)?(tb):(ta)); \
}))
#else
#define audio_MIN(a, b) ((a)>(b)?(b):(a))
#define audio_MAX(a, b) ((a)<(b)?(b):(a))
#endif
int wav_start_capture (CaptureState *s, const char *path, int freq,
int bits, int nchannels);
bool audio_is_cleaning_up(void);
void audio_cleanup(void);
@@ -168,14 +171,4 @@ void audio_sample_to_uint64(void *samples, int pos,
void audio_sample_from_uint64(void *samples, int pos,
uint64_t left, uint64_t right);
void audio_parse_option(const char *opt);
void audio_init_audiodevs(void);
void audio_legacy_help(void);
AudioState *audio_state_by_name(const char *name);
const char *audio_get_id(QEMUSoundCard *card);
#define DEFINE_AUDIO_PROPERTIES(_s, _f) \
DEFINE_PROP_AUDIODEV("audiodev", _s, _f)
#endif /* QEMU_AUDIO_H */
+60 -92
View File
@@ -33,6 +33,22 @@
struct audio_pcm_ops;
typedef enum {
AUD_OPT_INT,
AUD_OPT_FMT,
AUD_OPT_STR,
AUD_OPT_BOOL
} audio_option_tag_e;
struct audio_option {
const char *name;
audio_option_tag_e tag;
void *valp;
const char *descr;
int *overriddenp;
int overridden;
};
struct audio_callback {
void *opaque;
audio_callback_fn fn;
@@ -40,74 +56,66 @@ struct audio_callback {
struct audio_pcm_info {
int bits;
bool is_signed;
bool is_float;
int sign;
int freq;
int nchannels;
int bytes_per_frame;
int align;
int shift;
int bytes_per_second;
int swap_endianness;
};
typedef struct AudioState AudioState;
typedef struct SWVoiceCap SWVoiceCap;
typedef struct STSampleBuffer {
size_t pos, size;
st_sample samples[];
} STSampleBuffer;
typedef struct HWVoiceOut {
AudioState *s;
int enabled;
int poll_mode;
int pending_disable;
struct audio_pcm_info info;
f_sample *clip;
int rpos;
uint64_t ts_helper;
STSampleBuffer *mix_buf;
void *buf_emul;
size_t pos_emul, pending_emul, size_emul;
struct st_sample *mix_buf;
size_t samples;
int samples;
QLIST_HEAD (sw_out_listhead, SWVoiceOut) sw_head;
QLIST_HEAD (sw_cap_listhead, SWVoiceCap) cap_head;
int ctl_caps;
struct audio_pcm_ops *pcm_ops;
QLIST_ENTRY (HWVoiceOut) entries;
} HWVoiceOut;
typedef struct HWVoiceIn {
AudioState *s;
int enabled;
int poll_mode;
struct audio_pcm_info info;
t_sample *conv;
size_t total_samples_captured;
int wpos;
int total_samples_captured;
uint64_t ts_helper;
STSampleBuffer *conv_buf;
void *buf_emul;
size_t pos_emul, pending_emul, size_emul;
struct st_sample *conv_buf;
size_t samples;
int samples;
QLIST_HEAD (sw_in_listhead, SWVoiceIn) sw_head;
int ctl_caps;
struct audio_pcm_ops *pcm_ops;
QLIST_ENTRY (HWVoiceIn) entries;
} HWVoiceIn;
struct SWVoiceOut {
QEMUSoundCard *card;
AudioState *s;
struct audio_pcm_info info;
t_sample *conv;
int64_t ratio;
struct st_sample *buf;
void *rate;
size_t total_hw_samples_mixed;
int total_hw_samples_mixed;
int active;
int empty;
HWVoiceOut *hw;
@@ -119,12 +127,11 @@ struct SWVoiceOut {
struct SWVoiceIn {
QEMUSoundCard *card;
AudioState *s;
int active;
struct audio_pcm_info info;
int64_t ratio;
void *rate;
size_t total_hw_samples_acquired;
int total_hw_samples_acquired;
struct st_sample *buf;
f_sample *clip;
HWVoiceIn *hw;
@@ -138,7 +145,8 @@ typedef struct audio_driver audio_driver;
struct audio_driver {
const char *name;
const char *descr;
void *(*init) (Audiodev *);
struct audio_option *options;
void *(*init) (void);
void (*fini) (void *);
struct audio_pcm_ops *pcm_ops;
int can_be_default;
@@ -146,46 +154,24 @@ struct audio_driver {
int max_voices_in;
int voice_size_out;
int voice_size_in;
int ctl_caps;
QLIST_ENTRY(audio_driver) next;
};
struct audio_pcm_ops {
int (*init_out)(HWVoiceOut *hw, audsettings *as, void *drv_opaque);
void (*fini_out)(HWVoiceOut *hw);
size_t (*write) (HWVoiceOut *hw, void *buf, size_t size);
void (*run_buffer_out)(HWVoiceOut *hw);
/*
* get a buffer that after later can be passed to put_buffer_out; optional
* returns the buffer, and writes it's size to size (in bytes)
* this is unrelated to the above buffer_size_out function
*/
void *(*get_buffer_out)(HWVoiceOut *hw, size_t *size);
/*
* put back the buffer returned by get_buffer_out; optional
* buf must be equal the pointer returned by get_buffer_out,
* size may be smaller
*/
size_t (*put_buffer_out)(HWVoiceOut *hw, void *buf, size_t size);
void (*enable_out)(HWVoiceOut *hw, bool enable);
void (*volume_out)(HWVoiceOut *hw, Volume *vol);
int (*init_out)(HWVoiceOut *hw, struct audsettings *as, void *drv_opaque);
void (*fini_out)(HWVoiceOut *hw);
int (*run_out) (HWVoiceOut *hw, int live);
int (*write) (SWVoiceOut *sw, void *buf, int size);
int (*ctl_out) (HWVoiceOut *hw, int cmd, ...);
int (*init_in) (HWVoiceIn *hw, audsettings *as, void *drv_opaque);
void (*fini_in) (HWVoiceIn *hw);
size_t (*read) (HWVoiceIn *hw, void *buf, size_t size);
void *(*get_buffer_in)(HWVoiceIn *hw, size_t *size);
void (*put_buffer_in)(HWVoiceIn *hw, void *buf, size_t size);
void (*enable_in)(HWVoiceIn *hw, bool enable);
void (*volume_in)(HWVoiceIn *hw, Volume *vol);
int (*init_in) (HWVoiceIn *hw, struct audsettings *as, void *drv_opaque);
void (*fini_in) (HWVoiceIn *hw);
int (*run_in) (HWVoiceIn *hw);
int (*read) (SWVoiceIn *sw, void *buf, int size);
int (*ctl_in) (HWVoiceIn *hw, int cmd, ...);
};
void *audio_generic_get_buffer_in(HWVoiceIn *hw, size_t *size);
void audio_generic_put_buffer_in(HWVoiceIn *hw, void *buf, size_t size);
void audio_generic_run_buffer_out(HWVoiceOut *hw);
void *audio_generic_get_buffer_out(HWVoiceOut *hw, size_t *size);
size_t audio_generic_put_buffer_out(HWVoiceOut *hw, void *buf, size_t size);
size_t audio_generic_write(HWVoiceOut *hw, void *buf, size_t size);
size_t audio_generic_read(HWVoiceIn *hw, void *buf, size_t size);
struct capture_callback {
struct audio_capture_ops ops;
void *opaque;
@@ -205,9 +191,8 @@ struct SWVoiceCap {
QLIST_ENTRY (SWVoiceCap) entries;
};
typedef struct AudioState {
struct AudioState {
struct audio_driver *drv;
Audiodev *dev;
void *drv_opaque;
QEMUTimer *ts;
@@ -218,39 +203,36 @@ typedef struct AudioState {
int nb_hw_voices_out;
int nb_hw_voices_in;
int vm_running;
int64_t period_ticks;
bool timer_running;
uint64_t timer_last;
QTAILQ_ENTRY(AudioState) list;
} AudioState;
};
extern const struct mixeng_volume nominal_volume;
extern const char *audio_prio_list[];
void audio_driver_register(audio_driver *drv);
audio_driver *audio_driver_lookup(const char *name);
void audio_pcm_init_info (struct audio_pcm_info *info, struct audsettings *as);
void audio_pcm_info_clear_buf (struct audio_pcm_info *info, void *buf, int len);
int audio_pcm_sw_write (SWVoiceOut *sw, void *buf, int len);
int audio_pcm_hw_get_live_in (HWVoiceIn *hw);
int audio_pcm_sw_read (SWVoiceIn *sw, void *buf, int len);
int audio_pcm_hw_clip_out (HWVoiceOut *hw, void *pcm_buf,
int live, int pending);
int audio_bug (const char *funcname, int cond);
void *audio_calloc (const char *funcname, int nmemb, size_t size);
void audio_run(AudioState *s, const char *msg);
void audio_run (const char *msg);
typedef struct RateCtl {
int64_t start_ticks;
int64_t bytes_sent;
} RateCtl;
#define VOICE_ENABLE 1
#define VOICE_DISABLE 2
#define VOICE_VOLUME 3
void audio_rate_start(RateCtl *rate);
size_t audio_rate_get_bytes(struct audio_pcm_info *info, RateCtl *rate,
size_t bytes_avail);
#define VOICE_VOLUME_CAP (1 << VOICE_VOLUME)
static inline size_t audio_ring_dist(size_t dst, size_t src, size_t len)
static inline int audio_ring_dist (int dst, int src, int len)
{
return (dst >= src) ? (dst - src) : (len - src + dst);
}
@@ -266,18 +248,4 @@ static inline size_t audio_ring_dist(size_t dst, size_t src, size_t len)
#define AUDIO_STRINGIFY_(n) #n
#define AUDIO_STRINGIFY(n) AUDIO_STRINGIFY_(n)
typedef struct AudiodevListEntry {
Audiodev *dev;
QSIMPLEQ_ENTRY(AudiodevListEntry) next;
} AudiodevListEntry;
typedef QSIMPLEQ_HEAD(, AudiodevListEntry) AudiodevListHead;
AudiodevListHead audio_handle_legacy_opts(void);
void audio_free_audiodev_list(AudiodevListHead *head);
void audio_create_pdos(Audiodev *dev);
AudiodevPerDirectionOptions *audio_get_pdo_in(Audiodev *dev);
AudiodevPerDirectionOptions *audio_get_pdo_out(Audiodev *dev);
#endif /* QEMU_AUDIO_INT_H */
-549
View File
@@ -1,549 +0,0 @@
/*
* QEMU Audio subsystem: legacy configuration handling
*
* Copyright (c) 2015-2019 Zoltán Kővágó <DirtY.iCE.hu@gmail.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "audio.h"
#include "audio_int.h"
#include "qemu/cutils.h"
#include "qemu/timer.h"
#include "qapi/error.h"
#include "qapi/qapi-visit-audio.h"
#include "qapi/visitor-impl.h"
#define AUDIO_CAP "audio-legacy"
#include "audio_int.h"
static uint32_t toui32(const char *str)
{
unsigned long long ret;
if (parse_uint_full(str, &ret, 10) || ret > UINT32_MAX) {
dolog("Invalid integer value `%s'\n", str);
exit(1);
}
return ret;
}
/* helper functions to convert env variables */
static void get_bool(const char *env, bool *dst, bool *has_dst)
{
const char *val = getenv(env);
if (val) {
*dst = toui32(val) != 0;
*has_dst = true;
}
}
static void get_int(const char *env, uint32_t *dst, bool *has_dst)
{
const char *val = getenv(env);
if (val) {
*dst = toui32(val);
*has_dst = true;
}
}
static void get_str(const char *env, char **dst, bool *has_dst)
{
const char *val = getenv(env);
if (val) {
if (*has_dst) {
g_free(*dst);
}
*dst = g_strdup(val);
*has_dst = true;
}
}
static void get_fmt(const char *env, AudioFormat *dst, bool *has_dst)
{
const char *val = getenv(env);
if (val) {
size_t i;
for (i = 0; AudioFormat_lookup.size; ++i) {
if (strcasecmp(val, AudioFormat_lookup.array[i]) == 0) {
*dst = i;
*has_dst = true;
return;
}
}
dolog("Invalid audio format `%s'\n", val);
exit(1);
}
}
static void get_millis_to_usecs(const char *env, uint32_t *dst, bool *has_dst)
{
const char *val = getenv(env);
if (val) {
*dst = toui32(val) * 1000;
*has_dst = true;
}
}
static uint32_t frames_to_usecs(uint32_t frames,
AudiodevPerDirectionOptions *pdo)
{
uint32_t freq = pdo->has_frequency ? pdo->frequency : 44100;
return (frames * 1000000 + freq / 2) / freq;
}
static void get_frames_to_usecs(const char *env, uint32_t *dst, bool *has_dst,
AudiodevPerDirectionOptions *pdo)
{
const char *val = getenv(env);
if (val) {
*dst = frames_to_usecs(toui32(val), pdo);
*has_dst = true;
}
}
static uint32_t samples_to_usecs(uint32_t samples,
AudiodevPerDirectionOptions *pdo)
{
uint32_t channels = pdo->has_channels ? pdo->channels : 2;
return frames_to_usecs(samples / channels, pdo);
}
static void get_samples_to_usecs(const char *env, uint32_t *dst, bool *has_dst,
AudiodevPerDirectionOptions *pdo)
{
const char *val = getenv(env);
if (val) {
*dst = samples_to_usecs(toui32(val), pdo);
*has_dst = true;
}
}
static uint32_t bytes_to_usecs(uint32_t bytes, AudiodevPerDirectionOptions *pdo)
{
AudioFormat fmt = pdo->has_format ? pdo->format : AUDIO_FORMAT_S16;
uint32_t bytes_per_sample = audioformat_bytes_per_sample(fmt);
return samples_to_usecs(bytes / bytes_per_sample, pdo);
}
static void get_bytes_to_usecs(const char *env, uint32_t *dst, bool *has_dst,
AudiodevPerDirectionOptions *pdo)
{
const char *val = getenv(env);
if (val) {
*dst = bytes_to_usecs(toui32(val), pdo);
*has_dst = true;
}
}
/* backend specific functions */
/* ALSA */
static void handle_alsa_per_direction(
AudiodevAlsaPerDirectionOptions *apdo, const char *prefix)
{
char buf[64];
size_t len = strlen(prefix);
bool size_in_usecs = false;
bool dummy;
memcpy(buf, prefix, len);
strcpy(buf + len, "TRY_POLL");
get_bool(buf, &apdo->try_poll, &apdo->has_try_poll);
strcpy(buf + len, "DEV");
get_str(buf, &apdo->dev, &apdo->has_dev);
strcpy(buf + len, "SIZE_IN_USEC");
get_bool(buf, &size_in_usecs, &dummy);
strcpy(buf + len, "PERIOD_SIZE");
get_int(buf, &apdo->period_length, &apdo->has_period_length);
if (apdo->has_period_length && !size_in_usecs) {
apdo->period_length = frames_to_usecs(
apdo->period_length,
qapi_AudiodevAlsaPerDirectionOptions_base(apdo));
}
strcpy(buf + len, "BUFFER_SIZE");
get_int(buf, &apdo->buffer_length, &apdo->has_buffer_length);
if (apdo->has_buffer_length && !size_in_usecs) {
apdo->buffer_length = frames_to_usecs(
apdo->buffer_length,
qapi_AudiodevAlsaPerDirectionOptions_base(apdo));
}
}
static void handle_alsa(Audiodev *dev)
{
AudiodevAlsaOptions *aopt = &dev->u.alsa;
handle_alsa_per_direction(aopt->in, "QEMU_ALSA_ADC_");
handle_alsa_per_direction(aopt->out, "QEMU_ALSA_DAC_");
get_millis_to_usecs("QEMU_ALSA_THRESHOLD",
&aopt->threshold, &aopt->has_threshold);
}
/* coreaudio */
static void handle_coreaudio(Audiodev *dev)
{
get_frames_to_usecs(
"QEMU_COREAUDIO_BUFFER_SIZE",
&dev->u.coreaudio.out->buffer_length,
&dev->u.coreaudio.out->has_buffer_length,
qapi_AudiodevCoreaudioPerDirectionOptions_base(dev->u.coreaudio.out));
get_int("QEMU_COREAUDIO_BUFFER_COUNT",
&dev->u.coreaudio.out->buffer_count,
&dev->u.coreaudio.out->has_buffer_count);
}
/* dsound */
static void handle_dsound(Audiodev *dev)
{
get_millis_to_usecs("QEMU_DSOUND_LATENCY_MILLIS",
&dev->u.dsound.latency, &dev->u.dsound.has_latency);
get_bytes_to_usecs("QEMU_DSOUND_BUFSIZE_OUT",
&dev->u.dsound.out->buffer_length,
&dev->u.dsound.out->has_buffer_length,
dev->u.dsound.out);
get_bytes_to_usecs("QEMU_DSOUND_BUFSIZE_IN",
&dev->u.dsound.in->buffer_length,
&dev->u.dsound.in->has_buffer_length,
dev->u.dsound.in);
}
/* OSS */
static void handle_oss_per_direction(
AudiodevOssPerDirectionOptions *opdo, const char *try_poll_env,
const char *dev_env)
{
get_bool(try_poll_env, &opdo->try_poll, &opdo->has_try_poll);
get_str(dev_env, &opdo->dev, &opdo->has_dev);
get_bytes_to_usecs("QEMU_OSS_FRAGSIZE",
&opdo->buffer_length, &opdo->has_buffer_length,
qapi_AudiodevOssPerDirectionOptions_base(opdo));
get_int("QEMU_OSS_NFRAGS", &opdo->buffer_count,
&opdo->has_buffer_count);
}
static void handle_oss(Audiodev *dev)
{
AudiodevOssOptions *oopt = &dev->u.oss;
handle_oss_per_direction(oopt->in, "QEMU_AUDIO_ADC_TRY_POLL",
"QEMU_OSS_ADC_DEV");
handle_oss_per_direction(oopt->out, "QEMU_AUDIO_DAC_TRY_POLL",
"QEMU_OSS_DAC_DEV");
get_bool("QEMU_OSS_MMAP", &oopt->try_mmap, &oopt->has_try_mmap);
get_bool("QEMU_OSS_EXCLUSIVE", &oopt->exclusive, &oopt->has_exclusive);
get_int("QEMU_OSS_POLICY", &oopt->dsp_policy, &oopt->has_dsp_policy);
}
/* pulseaudio */
static void handle_pa_per_direction(
AudiodevPaPerDirectionOptions *ppdo, const char *env)
{
get_str(env, &ppdo->name, &ppdo->has_name);
}
static void handle_pa(Audiodev *dev)
{
handle_pa_per_direction(dev->u.pa.in, "QEMU_PA_SOURCE");
handle_pa_per_direction(dev->u.pa.out, "QEMU_PA_SINK");
get_samples_to_usecs(
"QEMU_PA_SAMPLES", &dev->u.pa.in->buffer_length,
&dev->u.pa.in->has_buffer_length,
qapi_AudiodevPaPerDirectionOptions_base(dev->u.pa.in));
get_samples_to_usecs(
"QEMU_PA_SAMPLES", &dev->u.pa.out->buffer_length,
&dev->u.pa.out->has_buffer_length,
qapi_AudiodevPaPerDirectionOptions_base(dev->u.pa.out));
get_str("QEMU_PA_SERVER", &dev->u.pa.server, &dev->u.pa.has_server);
}
/* SDL */
static void handle_sdl(Audiodev *dev)
{
/* SDL is output only */
get_samples_to_usecs("QEMU_SDL_SAMPLES", &dev->u.sdl.out->buffer_length,
&dev->u.sdl.out->has_buffer_length, dev->u.sdl.out);
}
/* wav */
static void handle_wav(Audiodev *dev)
{
get_int("QEMU_WAV_FREQUENCY",
&dev->u.wav.out->frequency, &dev->u.wav.out->has_frequency);
get_fmt("QEMU_WAV_FORMAT", &dev->u.wav.out->format,
&dev->u.wav.out->has_format);
get_int("QEMU_WAV_DAC_FIXED_CHANNELS",
&dev->u.wav.out->channels, &dev->u.wav.out->has_channels);
get_str("QEMU_WAV_PATH", &dev->u.wav.path, &dev->u.wav.has_path);
}
/* general */
static void handle_per_direction(
AudiodevPerDirectionOptions *pdo, const char *prefix)
{
char buf[64];
size_t len = strlen(prefix);
memcpy(buf, prefix, len);
strcpy(buf + len, "FIXED_SETTINGS");
get_bool(buf, &pdo->fixed_settings, &pdo->has_fixed_settings);
strcpy(buf + len, "FIXED_FREQ");
get_int(buf, &pdo->frequency, &pdo->has_frequency);
strcpy(buf + len, "FIXED_FMT");
get_fmt(buf, &pdo->format, &pdo->has_format);
strcpy(buf + len, "FIXED_CHANNELS");
get_int(buf, &pdo->channels, &pdo->has_channels);
strcpy(buf + len, "VOICES");
get_int(buf, &pdo->voices, &pdo->has_voices);
}
static AudiodevListEntry *legacy_opt(const char *drvname)
{
AudiodevListEntry *e = g_malloc0(sizeof(AudiodevListEntry));
e->dev = g_malloc0(sizeof(Audiodev));
e->dev->id = g_strdup(drvname);
e->dev->driver = qapi_enum_parse(
&AudiodevDriver_lookup, drvname, -1, &error_abort);
audio_create_pdos(e->dev);
handle_per_direction(audio_get_pdo_in(e->dev), "QEMU_AUDIO_ADC_");
handle_per_direction(audio_get_pdo_out(e->dev), "QEMU_AUDIO_DAC_");
/* Original description: Timer period in HZ (0 - use lowest possible) */
get_int("QEMU_AUDIO_TIMER_PERIOD",
&e->dev->timer_period, &e->dev->has_timer_period);
if (e->dev->has_timer_period && e->dev->timer_period) {
e->dev->timer_period = NANOSECONDS_PER_SECOND / 1000 /
e->dev->timer_period;
}
switch (e->dev->driver) {
case AUDIODEV_DRIVER_ALSA:
handle_alsa(e->dev);
break;
case AUDIODEV_DRIVER_COREAUDIO:
handle_coreaudio(e->dev);
break;
case AUDIODEV_DRIVER_DSOUND:
handle_dsound(e->dev);
break;
case AUDIODEV_DRIVER_OSS:
handle_oss(e->dev);
break;
case AUDIODEV_DRIVER_PA:
handle_pa(e->dev);
break;
case AUDIODEV_DRIVER_SDL:
handle_sdl(e->dev);
break;
case AUDIODEV_DRIVER_WAV:
handle_wav(e->dev);
break;
default:
break;
}
return e;
}
AudiodevListHead audio_handle_legacy_opts(void)
{
const char *drvname = getenv("QEMU_AUDIO_DRV");
AudiodevListHead head = QSIMPLEQ_HEAD_INITIALIZER(head);
if (drvname) {
AudiodevListEntry *e;
audio_driver *driver = audio_driver_lookup(drvname);
if (!driver) {
dolog("Unknown audio driver `%s'\n", drvname);
exit(1);
}
e = legacy_opt(drvname);
QSIMPLEQ_INSERT_TAIL(&head, e, next);
} else {
for (int i = 0; audio_prio_list[i]; i++) {
audio_driver *driver = audio_driver_lookup(audio_prio_list[i]);
if (driver && driver->can_be_default) {
AudiodevListEntry *e = legacy_opt(driver->name);
QSIMPLEQ_INSERT_TAIL(&head, e, next);
}
}
if (QSIMPLEQ_EMPTY(&head)) {
dolog("Internal error: no default audio driver available\n");
exit(1);
}
}
return head;
}
/* visitor to print -audiodev option */
typedef struct {
Visitor visitor;
bool comma;
GList *path;
} LegacyPrintVisitor;
static void lv_start_struct(Visitor *v, const char *name, void **obj,
size_t size, Error **errp)
{
LegacyPrintVisitor *lv = (LegacyPrintVisitor *) v;
lv->path = g_list_append(lv->path, g_strdup(name));
}
static void lv_end_struct(Visitor *v, void **obj)
{
LegacyPrintVisitor *lv = (LegacyPrintVisitor *) v;
lv->path = g_list_delete_link(lv->path, g_list_last(lv->path));
}
static void lv_print_key(Visitor *v, const char *name)
{
GList *e;
LegacyPrintVisitor *lv = (LegacyPrintVisitor *) v;
if (lv->comma) {
putchar(',');
} else {
lv->comma = true;
}
for (e = lv->path; e; e = e->next) {
if (e->data) {
printf("%s.", (const char *) e->data);
}
}
printf("%s=", name);
}
static void lv_type_int64(Visitor *v, const char *name, int64_t *obj,
Error **errp)
{
lv_print_key(v, name);
printf("%" PRIi64, *obj);
}
static void lv_type_uint64(Visitor *v, const char *name, uint64_t *obj,
Error **errp)
{
lv_print_key(v, name);
printf("%" PRIu64, *obj);
}
static void lv_type_bool(Visitor *v, const char *name, bool *obj, Error **errp)
{
lv_print_key(v, name);
printf("%s", *obj ? "on" : "off");
}
static void lv_type_str(Visitor *v, const char *name, char **obj, Error **errp)
{
const char *str = *obj;
lv_print_key(v, name);
while (*str) {
if (*str == ',') {
putchar(',');
}
putchar(*str++);
}
}
static void lv_complete(Visitor *v, void *opaque)
{
LegacyPrintVisitor *lv = (LegacyPrintVisitor *) v;
assert(lv->path == NULL);
}
static void lv_free(Visitor *v)
{
LegacyPrintVisitor *lv = (LegacyPrintVisitor *) v;
g_list_free_full(lv->path, g_free);
g_free(lv);
}
static Visitor *legacy_visitor_new(void)
{
LegacyPrintVisitor *lv = g_malloc0(sizeof(LegacyPrintVisitor));
lv->visitor.start_struct = lv_start_struct;
lv->visitor.end_struct = lv_end_struct;
/* lists not supported */
lv->visitor.type_int64 = lv_type_int64;
lv->visitor.type_uint64 = lv_type_uint64;
lv->visitor.type_bool = lv_type_bool;
lv->visitor.type_str = lv_type_str;
lv->visitor.type = VISITOR_OUTPUT;
lv->visitor.complete = lv_complete;
lv->visitor.free = lv_free;
return &lv->visitor;
}
void audio_legacy_help(void)
{
AudiodevListHead head;
AudiodevListEntry *e;
printf("Environment variable based configuration deprecated.\n");
printf("Please use the new -audiodev option.\n");
head = audio_handle_legacy_opts();
printf("\nEquivalent -audiodev to your current environment variables:\n");
if (!getenv("QEMU_AUDIO_DRV")) {
printf("(Since you didn't specify QEMU_AUDIO_DRV, I'll list all "
"possibilities)\n");
}
QSIMPLEQ_FOREACH(e, &head, next) {
Visitor *v;
Audiodev *dev = e->dev;
printf("-audiodev ");
v = legacy_visitor_new();
visit_type_Audiodev(v, NULL, &dev, &error_abort);
visit_free(v);
printf("\n");
}
audio_free_audiodev_list(&head);
}
+174
View File
@@ -0,0 +1,174 @@
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "audio.h"
#define AUDIO_CAP "audio-pt"
#include "audio_int.h"
#include "audio_pt_int.h"
static void GCC_FMT_ATTR(3, 4) logerr (struct audio_pt *pt, int err,
const char *fmt, ...)
{
va_list ap;
va_start (ap, fmt);
AUD_vlog (pt->drv, fmt, ap);
va_end (ap);
AUD_log (NULL, "\n");
AUD_log (pt->drv, "Reason: %s\n", strerror (err));
}
int audio_pt_init (struct audio_pt *p, void *(*func) (void *),
void *opaque, const char *drv, const char *cap)
{
int err, err2;
const char *efunc;
sigset_t set, old_set;
p->drv = drv;
err = sigfillset (&set);
if (err) {
logerr(p, errno, "%s(%s): sigfillset failed", cap, __func__);
return -1;
}
err = pthread_mutex_init (&p->mutex, NULL);
if (err) {
efunc = "pthread_mutex_init";
goto err0;
}
err = pthread_cond_init (&p->cond, NULL);
if (err) {
efunc = "pthread_cond_init";
goto err1;
}
err = pthread_sigmask (SIG_BLOCK, &set, &old_set);
if (err) {
efunc = "pthread_sigmask";
goto err2;
}
err = pthread_create (&p->thread, NULL, func, opaque);
err2 = pthread_sigmask (SIG_SETMASK, &old_set, NULL);
if (err2) {
logerr(p, err2, "%s(%s): pthread_sigmask (restore) failed",
cap, __func__);
/* We have failed to restore original signal mask, all bets are off,
so terminate the process */
exit (EXIT_FAILURE);
}
if (err) {
efunc = "pthread_create";
goto err2;
}
return 0;
err2:
err2 = pthread_cond_destroy (&p->cond);
if (err2) {
logerr(p, err2, "%s(%s): pthread_cond_destroy failed", cap, __func__);
}
err1:
err2 = pthread_mutex_destroy (&p->mutex);
if (err2) {
logerr(p, err2, "%s(%s): pthread_mutex_destroy failed", cap, __func__);
}
err0:
logerr(p, err, "%s(%s): %s failed", cap, __func__, efunc);
return -1;
}
int audio_pt_fini (struct audio_pt *p, const char *cap)
{
int err, ret = 0;
err = pthread_cond_destroy (&p->cond);
if (err) {
logerr(p, err, "%s(%s): pthread_cond_destroy failed", cap, __func__);
ret = -1;
}
err = pthread_mutex_destroy (&p->mutex);
if (err) {
logerr(p, err, "%s(%s): pthread_mutex_destroy failed", cap, __func__);
ret = -1;
}
return ret;
}
int audio_pt_lock (struct audio_pt *p, const char *cap)
{
int err;
err = pthread_mutex_lock (&p->mutex);
if (err) {
logerr(p, err, "%s(%s): pthread_mutex_lock failed", cap, __func__);
return -1;
}
return 0;
}
int audio_pt_unlock (struct audio_pt *p, const char *cap)
{
int err;
err = pthread_mutex_unlock (&p->mutex);
if (err) {
logerr(p, err, "%s(%s): pthread_mutex_unlock failed", cap, __func__);
return -1;
}
return 0;
}
int audio_pt_wait (struct audio_pt *p, const char *cap)
{
int err;
err = pthread_cond_wait (&p->cond, &p->mutex);
if (err) {
logerr(p, err, "%s(%s): pthread_cond_wait failed", cap, __func__);
return -1;
}
return 0;
}
int audio_pt_unlock_and_signal (struct audio_pt *p, const char *cap)
{
int err;
err = pthread_mutex_unlock (&p->mutex);
if (err) {
logerr(p, err, "%s(%s): pthread_mutex_unlock failed", cap, __func__);
return -1;
}
err = pthread_cond_signal (&p->cond);
if (err) {
logerr(p, err, "%s(%s): pthread_cond_signal failed", cap, __func__);
return -1;
}
return 0;
}
int audio_pt_join (struct audio_pt *p, void **arg, const char *cap)
{
int err;
void *ret;
err = pthread_join (p->thread, &ret);
if (err) {
logerr(p, err, "%s(%s): pthread_join failed", cap, __func__);
return -1;
}
*arg = ret;
return 0;
}
+22
View File
@@ -0,0 +1,22 @@
#ifndef QEMU_AUDIO_PT_INT_H
#define QEMU_AUDIO_PT_INT_H
#include <pthread.h>
struct audio_pt {
const char *drv;
pthread_t thread;
pthread_cond_t cond;
pthread_mutex_t mutex;
};
int audio_pt_init (struct audio_pt *, void *(*) (void *), void *,
const char *, const char *);
int audio_pt_fini (struct audio_pt *, const char *);
int audio_pt_lock (struct audio_pt *, const char *);
int audio_pt_unlock (struct audio_pt *, const char *);
int audio_pt_wait (struct audio_pt *, const char *);
int audio_pt_unlock_and_signal (struct audio_pt *, const char *);
int audio_pt_join (struct audio_pt *, void **, const char *);
#endif /* QEMU_AUDIO_PT_INT_H */
+54 -110
View File
@@ -36,9 +36,9 @@
#define HWBUF hw->conv_buf
#endif
static void glue(audio_init_nb_voices_, TYPE)(AudioState *s,
struct audio_driver *drv)
static void glue (audio_init_nb_voices_, TYPE) (struct audio_driver *drv)
{
AudioState *s = &glob_audio_state;
int max_voices = glue (drv->max_voices_, TYPE);
int voice_size = glue (drv->voice_size_, TYPE);
@@ -71,24 +71,20 @@ static void glue(audio_init_nb_voices_, TYPE)(AudioState *s,
static void glue (audio_pcm_hw_free_resources_, TYPE) (HW *hw)
{
g_free(hw->buf_emul);
g_free (HWBUF);
HWBUF = NULL;
}
static void glue(audio_pcm_hw_alloc_resources_, TYPE)(HW *hw)
static int glue (audio_pcm_hw_alloc_resources_, TYPE) (HW *hw)
{
if (glue(audio_get_pdo_, TYPE)(hw->s->dev)->mixing_engine) {
size_t samples = hw->samples;
if (audio_bug(__func__, samples == 0)) {
dolog("Attempted to allocate empty buffer\n");
}
HWBUF = g_malloc0(sizeof(STSampleBuffer) + sizeof(st_sample) * samples);
HWBUF->size = samples;
} else {
HWBUF = NULL;
HWBUF = audio_calloc(__func__, hw->samples, sizeof(struct st_sample));
if (!HWBUF) {
dolog ("Could not allocate " NAME " buffer (%d samples)\n",
hw->samples);
return -1;
}
return 0;
}
static void glue (audio_pcm_sw_free_resources_, TYPE) (SW *sw)
@@ -107,11 +103,7 @@ static int glue (audio_pcm_sw_alloc_resources_, TYPE) (SW *sw)
{
int samples;
if (!glue(audio_get_pdo_, TYPE)(sw->s->dev)->mixing_engine) {
return 0;
}
samples = ((int64_t) sw->HWBUF->size << 32) / sw->ratio;
samples = ((int64_t) sw->hw->samples << 32) / sw->ratio;
sw->buf = audio_calloc(__func__, samples, sizeof(struct st_sample));
if (!sw->buf) {
@@ -153,23 +145,15 @@ static int glue (audio_pcm_sw_init_, TYPE) (
sw->ratio = ((int64_t) sw->info.freq << 32) / sw->hw->info.freq;
#endif
if (sw->info.is_float) {
#ifdef DAC
sw->conv = mixeng_conv_float[sw->info.nchannels == 2];
sw->conv = mixeng_conv
#else
sw->clip = mixeng_clip_float[sw->info.nchannels == 2];
sw->clip = mixeng_clip
#endif
} else {
#ifdef DAC
sw->conv = mixeng_conv
#else
sw->clip = mixeng_clip
#endif
[sw->info.nchannels == 2]
[sw->info.is_signed]
[sw->info.swap_endianness]
[audio_bits_to_index(sw->info.bits)];
}
[sw->info.nchannels == 2]
[sw->info.sign]
[sw->info.swap_endianness]
[audio_bits_to_index (sw->info.bits)];
sw->name = g_strdup (name);
err = glue (audio_pcm_sw_alloc_resources_, TYPE) (sw);
@@ -199,8 +183,8 @@ static void glue (audio_pcm_hw_del_sw_, TYPE) (SW *sw)
static void glue (audio_pcm_hw_gc_, TYPE) (HW **hwp)
{
AudioState *s = &glob_audio_state;
HW *hw = *hwp;
AudioState *s = hw->s;
if (!hw->sw_head.lh_first) {
#ifdef DAC
@@ -215,14 +199,15 @@ static void glue (audio_pcm_hw_gc_, TYPE) (HW **hwp)
}
}
static HW *glue(audio_pcm_hw_find_any_, TYPE)(AudioState *s, HW *hw)
static HW *glue (audio_pcm_hw_find_any_, TYPE) (HW *hw)
{
AudioState *s = &glob_audio_state;
return hw ? hw->entries.le_next : glue (s->hw_head_, TYPE).lh_first;
}
static HW *glue(audio_pcm_hw_find_any_enabled_, TYPE)(AudioState *s, HW *hw)
static HW *glue (audio_pcm_hw_find_any_enabled_, TYPE) (HW *hw)
{
while ((hw = glue(audio_pcm_hw_find_any_, TYPE)(s, hw))) {
while ((hw = glue (audio_pcm_hw_find_any_, TYPE) (hw))) {
if (hw->enabled) {
return hw;
}
@@ -230,10 +215,12 @@ static HW *glue(audio_pcm_hw_find_any_enabled_, TYPE)(AudioState *s, HW *hw)
return NULL;
}
static HW *glue(audio_pcm_hw_find_specific_, TYPE)(AudioState *s, HW *hw,
struct audsettings *as)
static HW *glue (audio_pcm_hw_find_specific_, TYPE) (
HW *hw,
struct audsettings *as
)
{
while ((hw = glue(audio_pcm_hw_find_any_, TYPE)(s, hw))) {
while ((hw = glue (audio_pcm_hw_find_any_, TYPE) (hw))) {
if (audio_pcm_info_eq (&hw->info, as)) {
return hw;
}
@@ -241,10 +228,10 @@ static HW *glue(audio_pcm_hw_find_specific_, TYPE)(AudioState *s, HW *hw,
return NULL;
}
static HW *glue(audio_pcm_hw_add_new_, TYPE)(AudioState *s,
struct audsettings *as)
static HW *glue (audio_pcm_hw_add_new_, TYPE) (struct audsettings *as)
{
HW *hw;
AudioState *s = &glob_audio_state;
struct audio_driver *drv = s->drv;
if (!glue (s->nb_hw_voices_, TYPE)) {
@@ -268,8 +255,8 @@ static HW *glue(audio_pcm_hw_add_new_, TYPE)(AudioState *s,
return NULL;
}
hw->s = s;
hw->pcm_ops = drv->pcm_ops;
hw->ctl_caps = drv->ctl_caps;
QLIST_INIT (&hw->sw_head);
#ifdef DAC
@@ -280,29 +267,23 @@ static HW *glue(audio_pcm_hw_add_new_, TYPE)(AudioState *s,
}
if (audio_bug(__func__, hw->samples <= 0)) {
dolog("hw->samples=%zd\n", hw->samples);
dolog ("hw->samples=%d\n", hw->samples);
goto err1;
}
if (hw->info.is_float) {
#ifdef DAC
hw->clip = mixeng_clip_float[hw->info.nchannels == 2];
hw->clip = mixeng_clip
#else
hw->conv = mixeng_conv_float[hw->info.nchannels == 2];
hw->conv = mixeng_conv
#endif
} else {
#ifdef DAC
hw->clip = mixeng_clip
#else
hw->conv = mixeng_conv
#endif
[hw->info.nchannels == 2]
[hw->info.is_signed]
[hw->info.swap_endianness]
[audio_bits_to_index(hw->info.bits)];
}
[hw->info.nchannels == 2]
[hw->info.sign]
[hw->info.swap_endianness]
[audio_bits_to_index (hw->info.bits)];
glue(audio_pcm_hw_alloc_resources_, TYPE)(hw);
if (glue (audio_pcm_hw_alloc_resources_, TYPE) (hw)) {
goto err1;
}
QLIST_INSERT_HEAD (&s->glue (hw_head_, TYPE), hw, entries);
glue (s->nb_hw_voices_, TYPE) -= 1;
@@ -318,62 +299,31 @@ static HW *glue(audio_pcm_hw_add_new_, TYPE)(AudioState *s,
return NULL;
}
AudiodevPerDirectionOptions *glue(audio_get_pdo_, TYPE)(Audiodev *dev)
{
switch (dev->driver) {
case AUDIODEV_DRIVER_NONE:
return dev->u.none.TYPE;
case AUDIODEV_DRIVER_ALSA:
return qapi_AudiodevAlsaPerDirectionOptions_base(dev->u.alsa.TYPE);
case AUDIODEV_DRIVER_COREAUDIO:
return qapi_AudiodevCoreaudioPerDirectionOptions_base(
dev->u.coreaudio.TYPE);
case AUDIODEV_DRIVER_DSOUND:
return dev->u.dsound.TYPE;
case AUDIODEV_DRIVER_OSS:
return qapi_AudiodevOssPerDirectionOptions_base(dev->u.oss.TYPE);
case AUDIODEV_DRIVER_PA:
return qapi_AudiodevPaPerDirectionOptions_base(dev->u.pa.TYPE);
case AUDIODEV_DRIVER_SDL:
return dev->u.sdl.TYPE;
case AUDIODEV_DRIVER_SPICE:
return dev->u.spice.TYPE;
case AUDIODEV_DRIVER_WAV:
return dev->u.wav.TYPE;
case AUDIODEV_DRIVER__MAX:
break;
}
abort();
}
static HW *glue(audio_pcm_hw_add_, TYPE)(AudioState *s, struct audsettings *as)
static HW *glue (audio_pcm_hw_add_, TYPE) (struct audsettings *as)
{
HW *hw;
AudiodevPerDirectionOptions *pdo = glue(audio_get_pdo_, TYPE)(s->dev);
if (!pdo->mixing_engine || pdo->fixed_settings) {
hw = glue(audio_pcm_hw_add_new_, TYPE)(s, as);
if (!pdo->mixing_engine || hw) {
if (glue (conf.fixed_, TYPE).enabled && glue (conf.fixed_, TYPE).greedy) {
hw = glue (audio_pcm_hw_add_new_, TYPE) (as);
if (hw) {
return hw;
}
}
hw = glue(audio_pcm_hw_find_specific_, TYPE)(s, NULL, as);
hw = glue (audio_pcm_hw_find_specific_, TYPE) (NULL, as);
if (hw) {
return hw;
}
hw = glue(audio_pcm_hw_add_new_, TYPE)(s, as);
hw = glue (audio_pcm_hw_add_new_, TYPE) (as);
if (hw) {
return hw;
}
return glue(audio_pcm_hw_find_any_, TYPE)(s, NULL);
return glue (audio_pcm_hw_find_any_, TYPE) (NULL);
}
static SW *glue(audio_pcm_create_voice_pair_, TYPE)(
AudioState *s,
static SW *glue (audio_pcm_create_voice_pair_, TYPE) (
const char *sw_name,
struct audsettings *as
)
@@ -381,10 +331,9 @@ static SW *glue(audio_pcm_create_voice_pair_, TYPE)(
SW *sw;
HW *hw;
struct audsettings hw_as;
AudiodevPerDirectionOptions *pdo = glue(audio_get_pdo_, TYPE)(s->dev);
if (pdo->fixed_settings) {
hw_as = audiodev_to_audsettings(pdo);
if (glue (conf.fixed_, TYPE).enabled) {
hw_as = glue (conf.fixed_, TYPE).settings;
}
else {
hw_as = *as;
@@ -396,9 +345,8 @@ static SW *glue(audio_pcm_create_voice_pair_, TYPE)(
sw_name ? sw_name : "unknown", sizeof (*sw));
goto err1;
}
sw->s = s;
hw = glue(audio_pcm_hw_add_, TYPE)(s, &hw_as);
hw = glue (audio_pcm_hw_add_, TYPE) (&hw_as);
if (!hw) {
goto err2;
}
@@ -449,8 +397,7 @@ SW *glue (AUD_open_, TYPE) (
struct audsettings *as
)
{
AudioState *s;
AudiodevPerDirectionOptions *pdo;
AudioState *s = &glob_audio_state;
if (audio_bug(__func__, !card || !name || !callback_fn || !as)) {
dolog ("card=%p name=%p callback_fn=%p as=%p\n",
@@ -458,9 +405,6 @@ SW *glue (AUD_open_, TYPE) (
goto fail;
}
s = card->state;
pdo = glue(audio_get_pdo_, TYPE)(s->dev);
ldebug ("open %s, freq %d, nchannels %d, fmt %d\n",
name, as->freq, as->nchannels, as->fmt);
@@ -478,7 +422,7 @@ SW *glue (AUD_open_, TYPE) (
return sw;
}
if (!pdo->fixed_settings && sw) {
if (!glue (conf.fixed_, TYPE).enabled && sw) {
glue (AUD_close_, TYPE) (card, sw);
sw = NULL;
}
@@ -498,7 +442,7 @@ SW *glue (AUD_open_, TYPE) (
}
}
else {
sw = glue(audio_pcm_create_voice_pair_, TYPE)(s, name, as);
sw = glue (audio_pcm_create_voice_pair_, TYPE) (name, as);
if (!sw) {
dolog ("Failed to create voice `%s'\n", name);
return NULL;
+9 -9
View File
@@ -24,20 +24,20 @@ int waveformat_from_audio_settings (WAVEFORMATEX *wfx,
wfx->cbSize = 0;
switch (as->fmt) {
case AUDIO_FORMAT_S8:
case AUDIO_FORMAT_U8:
case AUD_FMT_S8:
case AUD_FMT_U8:
wfx->wBitsPerSample = 8;
break;
case AUDIO_FORMAT_S16:
case AUDIO_FORMAT_U16:
case AUD_FMT_S16:
case AUD_FMT_U16:
wfx->wBitsPerSample = 16;
wfx->nAvgBytesPerSec <<= 1;
wfx->nBlockAlign <<= 1;
break;
case AUDIO_FORMAT_S32:
case AUDIO_FORMAT_U32:
case AUD_FMT_S32:
case AUD_FMT_U32:
wfx->wBitsPerSample = 32;
wfx->nAvgBytesPerSec <<= 2;
wfx->nBlockAlign <<= 2;
@@ -85,15 +85,15 @@ int waveformat_to_audio_settings (WAVEFORMATEX *wfx,
switch (wfx->wBitsPerSample) {
case 8:
as->fmt = AUDIO_FORMAT_U8;
as->fmt = AUD_FMT_U8;
break;
case 16:
as->fmt = AUDIO_FORMAT_S16;
as->fmt = AUD_FMT_S16;
break;
case 32:
as->fmt = AUDIO_FORMAT_S32;
as->fmt = AUD_FMT_S32;
break;
default:
+115 -69
View File
@@ -26,7 +26,7 @@
#include <CoreAudio/CoreAudio.h>
#include <pthread.h> /* pthread_X */
#include "qemu/module.h"
#include "qemu-common.h"
#include "audio.h"
#define AUDIO_CAP "coreaudio"
@@ -36,6 +36,11 @@
#define MAC_OS_X_VERSION_10_6 1060
#endif
typedef struct {
int buffer_frames;
int nbuffers;
} CoreaudioConf;
typedef struct coreaudioVoiceOut {
HWVoiceOut hw;
pthread_mutex_t mutex;
@@ -43,6 +48,9 @@ typedef struct coreaudioVoiceOut {
UInt32 audioDevicePropertyBufferFrameSize;
AudioStreamBasicDescription outputStreamBasicDescription;
AudioDeviceIOProcID ioprocid;
int live;
int decr;
int rpos;
} coreaudioVoiceOut;
#if MAC_OS_X_VERSION_MAX_ALLOWED >= MAC_OS_X_VERSION_10_6
@@ -394,29 +402,31 @@ static int coreaudio_unlock (coreaudioVoiceOut *core, const char *fn_name)
return 0;
}
#define COREAUDIO_WRAPPER_FUNC(name, ret_type, args_decl, args) \
static ret_type glue(coreaudio_, name)args_decl \
{ \
coreaudioVoiceOut *core = (coreaudioVoiceOut *) hw; \
ret_type ret; \
\
if (coreaudio_lock(core, "coreaudio_" #name)) { \
return 0; \
} \
\
ret = glue(audio_generic_, name)args; \
\
coreaudio_unlock(core, "coreaudio_" #name); \
return ret; \
static int coreaudio_run_out (HWVoiceOut *hw, int live)
{
int decr;
coreaudioVoiceOut *core = (coreaudioVoiceOut *) hw;
if (coreaudio_lock (core, "coreaudio_run_out")) {
return 0;
}
COREAUDIO_WRAPPER_FUNC(get_buffer_out, void *, (HWVoiceOut *hw, size_t *size),
(hw, size))
COREAUDIO_WRAPPER_FUNC(put_buffer_out, size_t,
(HWVoiceOut *hw, void *buf, size_t size),
(hw, buf, size))
COREAUDIO_WRAPPER_FUNC(write, size_t, (HWVoiceOut *hw, void *buf, size_t size),
(hw, buf, size))
#undef COREAUDIO_WRAPPER_FUNC
if (core->decr > live) {
ldebug ("core->decr %d live %d core->live %d\n",
core->decr,
live,
core->live);
}
decr = audio_MIN (core->decr, live);
core->decr -= decr;
core->live = live - decr;
hw->rpos = core->rpos;
coreaudio_unlock (core, "coreaudio_run_out");
return decr;
}
/* callback to feed audiooutput buffer */
static OSStatus audioDeviceIOProc(
@@ -428,11 +438,19 @@ static OSStatus audioDeviceIOProc(
const AudioTimeStamp* inOutputTime,
void* hwptr)
{
UInt32 frameCount, pending_frames;
void *out = outOutputData->mBuffers[0].mData;
UInt32 frame, frameCount;
float *out = outOutputData->mBuffers[0].mData;
HWVoiceOut *hw = hwptr;
coreaudioVoiceOut *core = (coreaudioVoiceOut *) hwptr;
size_t len;
int rpos, live;
struct st_sample *src;
#ifndef FLOAT_MIXENG
#ifdef RECIPROCAL
const float scale = 1.f / UINT_MAX;
#else
const float scale = UINT_MAX;
#endif
#endif
if (coreaudio_lock (core, "audioDeviceIOProc")) {
inInputTime = 0;
@@ -440,37 +458,47 @@ static OSStatus audioDeviceIOProc(
}
frameCount = core->audioDevicePropertyBufferFrameSize;
pending_frames = hw->pending_emul / hw->info.bytes_per_frame;
live = core->live;
/* if there are not enough samples, set signal and return */
if (pending_frames < frameCount) {
if (live < frameCount) {
inInputTime = 0;
coreaudio_unlock (core, "audioDeviceIOProc(empty)");
return 0;
}
len = frameCount * hw->info.bytes_per_frame;
while (len) {
size_t write_len;
ssize_t start = ((ssize_t) hw->pos_emul) - hw->pending_emul;
if (start < 0) {
start += hw->size_emul;
}
assert(start >= 0 && start < hw->size_emul);
rpos = core->rpos;
src = hw->mix_buf + rpos;
write_len = MIN(MIN(hw->pending_emul, len),
hw->size_emul - start);
memcpy(out, hw->buf_emul + start, write_len);
hw->pending_emul -= write_len;
len -= write_len;
out += write_len;
/* fill buffer */
for (frame = 0; frame < frameCount; frame++) {
#ifdef FLOAT_MIXENG
*out++ = src[frame].l; /* left channel */
*out++ = src[frame].r; /* right channel */
#else
#ifdef RECIPROCAL
*out++ = src[frame].l * scale; /* left channel */
*out++ = src[frame].r * scale; /* right channel */
#else
*out++ = src[frame].l / scale; /* left channel */
*out++ = src[frame].r / scale; /* right channel */
#endif
#endif
}
rpos = (rpos + frameCount) % hw->samples;
core->decr += frameCount;
core->rpos = rpos;
coreaudio_unlock (core, "audioDeviceIOProc");
return 0;
}
static int coreaudio_write (SWVoiceOut *sw, void *buf, int len)
{
return audio_pcm_sw_write (sw, buf, len);
}
static int coreaudio_init_out(HWVoiceOut *hw, struct audsettings *as,
void *drv_opaque)
{
@@ -479,10 +507,7 @@ static int coreaudio_init_out(HWVoiceOut *hw, struct audsettings *as,
int err;
const char *typ = "playback";
AudioValueRange frameRange;
Audiodev *dev = drv_opaque;
AudiodevCoreaudioPerDirectionOptions *cpdo = dev->u.coreaudio.out;
int frames;
struct audsettings fake_as;
CoreaudioConf *conf = drv_opaque;
/* create mutex */
err = pthread_mutex_init(&core->mutex, NULL);
@@ -491,9 +516,6 @@ static int coreaudio_init_out(HWVoiceOut *hw, struct audsettings *as,
return -1;
}
fake_as = *as;
as = &fake_as;
as->fmt = AUDIO_FORMAT_F32;
audio_pcm_init_info (&hw->info, as);
status = coreaudio_get_voice(&core->outputDeviceID);
@@ -516,17 +538,16 @@ static int coreaudio_init_out(HWVoiceOut *hw, struct audsettings *as,
return -1;
}
frames = audio_buffer_frames(
qapi_AudiodevCoreaudioPerDirectionOptions_base(cpdo), as, 11610);
if (frameRange.mMinimum > frames) {
if (frameRange.mMinimum > conf->buffer_frames) {
core->audioDevicePropertyBufferFrameSize = (UInt32) frameRange.mMinimum;
dolog ("warning: Upsizing Buffer Frames to %f\n", frameRange.mMinimum);
} else if (frameRange.mMaximum < frames) {
}
else if (frameRange.mMaximum < conf->buffer_frames) {
core->audioDevicePropertyBufferFrameSize = (UInt32) frameRange.mMaximum;
dolog ("warning: Downsizing Buffer Frames to %f\n", frameRange.mMaximum);
}
else {
core->audioDevicePropertyBufferFrameSize = frames;
core->audioDevicePropertyBufferFrameSize = conf->buffer_frames;
}
/* set Buffer Frame Size */
@@ -547,8 +568,7 @@ static int coreaudio_init_out(HWVoiceOut *hw, struct audsettings *as,
"Could not get device buffer frame size\n");
return -1;
}
hw->samples = (cpdo->has_buffer_count ? cpdo->buffer_count : 4) *
core->audioDevicePropertyBufferFrameSize;
hw->samples = conf->nbuffers * core->audioDevicePropertyBufferFrameSize;
/* get StreamFormat */
status = coreaudio_get_streamformat(core->outputDeviceID,
@@ -562,7 +582,6 @@ static int coreaudio_init_out(HWVoiceOut *hw, struct audsettings *as,
/* set Samplerate */
core->outputStreamBasicDescription.mSampleRate = (Float64) as->freq;
status = coreaudio_set_streamformat(core->outputDeviceID,
&core->outputStreamBasicDescription);
if (status != kAudioHardwareNoError) {
@@ -629,12 +648,13 @@ static void coreaudio_fini_out (HWVoiceOut *hw)
}
}
static void coreaudio_enable_out(HWVoiceOut *hw, bool enable)
static int coreaudio_ctl_out (HWVoiceOut *hw, int cmd, ...)
{
OSStatus status;
coreaudioVoiceOut *core = (coreaudioVoiceOut *) hw;
if (enable) {
switch (cmd) {
case VOICE_ENABLE:
/* start playback */
if (!isPlaying(core->outputDeviceID)) {
status = AudioDeviceStart(core->outputDeviceID, core->ioprocid);
@@ -642,7 +662,9 @@ static void coreaudio_enable_out(HWVoiceOut *hw, bool enable)
coreaudio_logerr (status, "Could not resume playback\n");
}
}
} else {
break;
case VOICE_DISABLE:
/* stop playback */
if (!audio_is_cleaning_up()) {
if (isPlaying(core->outputDeviceID)) {
@@ -653,33 +675,57 @@ static void coreaudio_enable_out(HWVoiceOut *hw, bool enable)
}
}
}
break;
}
return 0;
}
static void *coreaudio_audio_init(Audiodev *dev)
static CoreaudioConf glob_conf = {
.buffer_frames = 512,
.nbuffers = 4,
};
static void *coreaudio_audio_init (void)
{
return dev;
CoreaudioConf *conf = g_malloc(sizeof(CoreaudioConf));
*conf = glob_conf;
return conf;
}
static void coreaudio_audio_fini (void *opaque)
{
g_free(opaque);
}
static struct audio_option coreaudio_options[] = {
{
.name = "BUFFER_SIZE",
.tag = AUD_OPT_INT,
.valp = &glob_conf.buffer_frames,
.descr = "Size of the buffer in frames"
},
{
.name = "BUFFER_COUNT",
.tag = AUD_OPT_INT,
.valp = &glob_conf.nbuffers,
.descr = "Number of buffers"
},
{ /* End of list */ }
};
static struct audio_pcm_ops coreaudio_pcm_ops = {
.init_out = coreaudio_init_out,
.fini_out = coreaudio_fini_out,
/* wrapper for audio_generic_write */
.run_out = coreaudio_run_out,
.write = coreaudio_write,
/* wrapper for audio_generic_get_buffer_out */
.get_buffer_out = coreaudio_get_buffer_out,
/* wrapper for audio_generic_put_buffer_out */
.put_buffer_out = coreaudio_put_buffer_out,
.enable_out = coreaudio_enable_out
.ctl_out = coreaudio_ctl_out
};
static struct audio_driver coreaudio_audio_driver = {
.name = "coreaudio",
.descr = "CoreAudio http://developer.apple.com/audio/coreaudio.html",
.options = coreaudio_options,
.init = coreaudio_audio_init,
.fini = coreaudio_audio_fini,
.pcm_ops = &coreaudio_pcm_ops,
+29 -31
View File
@@ -29,8 +29,6 @@
#define BUFPTR LPDIRECTSOUNDCAPTUREBUFFER
#define FIELD dsound_capture_buffer
#define FIELD2 dsound_capture
#define HWVOICE HWVoiceIn
#define DSOUNDVOICE DSoundVoiceIn
#else
#define NAME "playback buffer"
#define NAME2 "DirectSound"
@@ -39,8 +37,6 @@
#define BUFPTR LPDIRECTSOUNDBUFFER
#define FIELD dsound_buffer
#define FIELD2 dsound
#define HWVOICE HWVoiceOut
#define DSOUNDVOICE DSoundVoiceOut
#endif
static int glue (dsound_unlock_, TYPE) (
@@ -76,6 +72,8 @@ static int glue (dsound_lock_, TYPE) (
)
{
HRESULT hr;
LPVOID p1 = NULL, p2 = NULL;
DWORD blen1 = 0, blen2 = 0;
DWORD flag;
#ifdef DSBTYPE_IN
@@ -83,7 +81,7 @@ static int glue (dsound_lock_, TYPE) (
#else
flag = entire ? DSBLOCK_ENTIREBUFFER : 0;
#endif
hr = glue(IFACE, _Lock)(buf, pos, len, p1p, blen1p, p2p, blen2p, flag);
hr = glue(IFACE, _Lock)(buf, pos, len, &p1, &blen1, &p2, &blen2, flag);
if (FAILED (hr)) {
#ifndef DSBTYPE_IN
@@ -98,34 +96,34 @@ static int glue (dsound_lock_, TYPE) (
goto fail;
}
if ((p1p && *p1p && (*blen1p % info->bytes_per_frame)) ||
(p2p && *p2p && (*blen2p % info->bytes_per_frame))) {
dolog("DirectSound returned misaligned buffer %ld %ld\n",
*blen1p, *blen2p);
glue(dsound_unlock_, TYPE)(buf, *p1p, p2p ? *p2p : NULL, *blen1p,
blen2p ? *blen2p : 0);
if ((p1 && (blen1 & info->align)) || (p2 && (blen2 & info->align))) {
dolog ("DirectSound returned misaligned buffer %ld %ld\n",
blen1, blen2);
glue (dsound_unlock_, TYPE) (buf, p1, p2, blen1, blen2);
goto fail;
}
if (p1p && !*p1p && *blen1p) {
dolog("warning: !p1 && blen1=%ld\n", *blen1p);
*blen1p = 0;
if (!p1 && blen1) {
dolog ("warning: !p1 && blen1=%ld\n", blen1);
blen1 = 0;
}
if (p2p && !*p2p && *blen2p) {
dolog("warning: !p2 && blen2=%ld\n", *blen2p);
*blen2p = 0;
if (!p2 && blen2) {
dolog ("warning: !p2 && blen2=%ld\n", blen2);
blen2 = 0;
}
*p1p = p1;
*p2p = p2;
*blen1p = blen1;
*blen2p = blen2;
return 0;
fail:
*p1p = NULL - 1;
*p2p = NULL - 1;
*blen1p = -1;
if (p2p) {
*p2p = NULL - 1;
*blen2p = -1;
}
*blen2p = -1;
return -1;
}
@@ -169,18 +167,17 @@ static int dsound_init_out(HWVoiceOut *hw, struct audsettings *as,
dsound *s = drv_opaque;
WAVEFORMATEX wfx;
struct audsettings obt_as;
DSoundConf *conf = &s->conf;
#ifdef DSBTYPE_IN
const char *typ = "ADC";
DSoundVoiceIn *ds = (DSoundVoiceIn *) hw;
DSCBUFFERDESC bd;
DSCBCAPS bc;
AudiodevPerDirectionOptions *pdo = s->dev->u.dsound.in;
#else
const char *typ = "DAC";
DSoundVoiceOut *ds = (DSoundVoiceOut *) hw;
DSBUFFERDESC bd;
DSBCAPS bc;
AudiodevPerDirectionOptions *pdo = s->dev->u.dsound.out;
#endif
if (!s->FIELD2) {
@@ -196,8 +193,8 @@ static int dsound_init_out(HWVoiceOut *hw, struct audsettings *as,
memset (&bd, 0, sizeof (bd));
bd.dwSize = sizeof (bd);
bd.lpwfxFormat = &wfx;
bd.dwBufferBytes = audio_buffer_bytes(pdo, as, 92880);
#ifdef DSBTYPE_IN
bd.dwBufferBytes = conf->bufsize_in;
hr = IDirectSoundCapture_CreateCaptureBuffer (
s->dsound_capture,
&bd,
@@ -206,6 +203,7 @@ static int dsound_init_out(HWVoiceOut *hw, struct audsettings *as,
);
#else
bd.dwFlags = DSBCAPS_STICKYFOCUS | DSBCAPS_GETCURRENTPOSITION2;
bd.dwBufferBytes = conf->bufsize_out;
hr = IDirectSound_CreateSoundBuffer (
s->dsound,
&bd,
@@ -244,23 +242,25 @@ static int dsound_init_out(HWVoiceOut *hw, struct audsettings *as,
goto fail0;
}
ds->first_time = true;
ds->first_time = 1;
obt_as.endianness = 0;
audio_pcm_init_info (&hw->info, &obt_as);
if (bc.dwBufferBytes % hw->info.bytes_per_frame) {
if (bc.dwBufferBytes & hw->info.align) {
dolog (
"GetCaps returned misaligned buffer size %ld, alignment %d\n",
bc.dwBufferBytes, hw->info.bytes_per_frame
bc.dwBufferBytes, hw->info.align + 1
);
}
hw->size_emul = bc.dwBufferBytes;
hw->samples = bc.dwBufferBytes / hw->info.bytes_per_frame;
hw->samples = bc.dwBufferBytes >> hw->info.shift;
ds->s = s;
#ifdef DEBUG_DSOUND
dolog ("caps %ld, desc %ld\n",
bc.dwBufferBytes, bd.dwBufferBytes);
dolog ("bufsize %d, freq %d, chan %d, fmt %d\n",
hw->bufsize, settings.freq, settings.nchannels, settings.fmt);
#endif
return 0;
@@ -276,5 +276,3 @@ static int dsound_init_out(HWVoiceOut *hw, struct audsettings *as,
#undef BUFPTR
#undef FIELD
#undef FIELD2
#undef HWVOICE
#undef DSOUNDVOICE
+326 -133
View File
@@ -27,12 +27,11 @@
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "audio.h"
#define AUDIO_CAP "dsound"
#include "audio_int.h"
#include "qemu/host-utils.h"
#include "qemu/module.h"
#include <windows.h>
#include <mmsystem.h>
@@ -43,24 +42,36 @@
/* #define DEBUG_DSOUND */
typedef struct {
int bufsize_in;
int bufsize_out;
int latency_millis;
} DSoundConf;
typedef struct {
LPDIRECTSOUND dsound;
LPDIRECTSOUNDCAPTURE dsound_capture;
struct audsettings settings;
Audiodev *dev;
DSoundConf conf;
} dsound;
typedef struct {
HWVoiceOut hw;
LPDIRECTSOUNDBUFFER dsound_buffer;
bool first_time;
DWORD old_pos;
int first_time;
dsound *s;
#ifdef DEBUG_DSOUND
DWORD old_ppos;
DWORD played;
DWORD mixed;
#endif
} DSoundVoiceOut;
typedef struct {
HWVoiceIn hw;
int first_time;
LPDIRECTSOUNDCAPTUREBUFFER dsound_capture_buffer;
bool first_time;
dsound *s;
} DSoundVoiceIn;
@@ -237,6 +248,11 @@ static void GCC_FMT_ATTR (3, 4) dsound_logerr2 (
dsound_log_hresult (hr);
}
static DWORD millis_to_bytes (struct audio_pcm_info *info, DWORD millis)
{
return (millis * info->bytes_per_second) / 1000;
}
#ifdef DEBUG_DSOUND
static void print_wave_format (WAVEFORMATEX *wfx)
{
@@ -279,7 +295,7 @@ static int dsound_get_status_out (LPDIRECTSOUNDBUFFER dsb, DWORD *statusp,
return -1;
}
if (*statusp & DSBSTATUS_BUFFERLOST) {
if (*statusp & DSERR_BUFFERLOST) {
dsound_restore_out(dsb, s);
return -1;
}
@@ -301,6 +317,33 @@ static int dsound_get_status_in (LPDIRECTSOUNDCAPTUREBUFFER dscb,
return 0;
}
static void dsound_write_sample (HWVoiceOut *hw, uint8_t *dst, int dst_len)
{
int src_len1 = dst_len;
int src_len2 = 0;
int pos = hw->rpos + dst_len;
struct st_sample *src1 = hw->mix_buf + hw->rpos;
struct st_sample *src2 = NULL;
if (pos > hw->samples) {
src_len1 = hw->samples - hw->rpos;
src2 = hw->mix_buf;
src_len2 = dst_len - src_len1;
pos = src_len2;
}
if (src_len1) {
hw->clip (dst, src1, src_len1);
}
if (src_len2) {
dst = advance (dst, src_len1 << hw->info.shift);
hw->clip (dst, src2, src_len2);
}
hw->rpos = pos % hw->samples;
}
static void dsound_clear_sample (HWVoiceOut *hw, LPDIRECTSOUNDBUFFER dsb,
dsound *s)
{
@@ -312,7 +355,7 @@ static void dsound_clear_sample (HWVoiceOut *hw, LPDIRECTSOUNDBUFFER dsb,
dsb,
&hw->info,
0,
hw->size_emul,
hw->samples << hw->info.shift,
&p1, &p2,
&blen1, &blen2,
1,
@@ -322,8 +365,8 @@ static void dsound_clear_sample (HWVoiceOut *hw, LPDIRECTSOUNDBUFFER dsb,
return;
}
len1 = blen1 / hw->info.bytes_per_frame;
len2 = blen2 / hw->info.bytes_per_frame;
len1 = blen1 >> hw->info.shift;
len2 = blen2 >> hw->info.shift;
#ifdef DEBUG_DSOUND
dolog ("clear %p,%ld,%ld %p,%ld,%ld\n",
@@ -363,7 +406,7 @@ static int dsound_open (dsound *s)
return 0;
}
static void dsound_enable_out(HWVoiceOut *hw, bool enable)
static int dsound_ctl_out (HWVoiceOut *hw, int cmd, ...)
{
HRESULT hr;
DWORD status;
@@ -373,17 +416,18 @@ static void dsound_enable_out(HWVoiceOut *hw, bool enable)
if (!dsb) {
dolog ("Attempt to control voice without a buffer\n");
return;
return 0;
}
if (enable) {
switch (cmd) {
case VOICE_ENABLE:
if (dsound_get_status_out (dsb, &status, s)) {
return;
return -1;
}
if (status & DSBSTATUS_PLAYING) {
dolog ("warning: Voice is already playing\n");
return;
return 0;
}
dsound_clear_sample (hw, dsb, s);
@@ -391,85 +435,170 @@ static void dsound_enable_out(HWVoiceOut *hw, bool enable)
hr = IDirectSoundBuffer_Play (dsb, 0, 0, DSBPLAY_LOOPING);
if (FAILED (hr)) {
dsound_logerr (hr, "Could not start playing buffer\n");
return;
return -1;
}
} else {
break;
case VOICE_DISABLE:
if (dsound_get_status_out (dsb, &status, s)) {
return;
return -1;
}
if (status & DSBSTATUS_PLAYING) {
hr = IDirectSoundBuffer_Stop (dsb);
if (FAILED (hr)) {
dsound_logerr (hr, "Could not stop playing buffer\n");
return;
return -1;
}
}
else {
dolog ("warning: Voice is not playing\n");
}
break;
}
return 0;
}
static void *dsound_get_buffer_out(HWVoiceOut *hw, size_t *size)
static int dsound_write (SWVoiceOut *sw, void *buf, int len)
{
return audio_pcm_sw_write (sw, buf, len);
}
static int dsound_run_out (HWVoiceOut *hw, int live)
{
DSoundVoiceOut *ds = (DSoundVoiceOut *) hw;
LPDIRECTSOUNDBUFFER dsb = ds->dsound_buffer;
HRESULT hr;
DWORD ppos, wpos, act_size;
size_t req_size;
int err;
void *ret;
hr = IDirectSoundBuffer_GetCurrentPosition(
dsb, &ppos, ds->first_time ? &wpos : NULL);
if (FAILED(hr)) {
dsound_logerr(hr, "Could not get playback buffer position\n");
*size = 0;
return NULL;
}
if (ds->first_time) {
hw->pos_emul = wpos;
ds->first_time = false;
}
req_size = audio_ring_dist(ppos, hw->pos_emul, hw->size_emul);
req_size = MIN(req_size, hw->size_emul - hw->pos_emul);
if (req_size == 0) {
*size = 0;
return NULL;
}
err = dsound_lock_out(dsb, &hw->info, hw->pos_emul, req_size, &ret, NULL,
&act_size, NULL, false, ds->s);
if (err) {
dolog("Failed to lock buffer\n");
*size = 0;
return NULL;
}
*size = act_size;
return ret;
}
static size_t dsound_put_buffer_out(HWVoiceOut *hw, void *buf, size_t len)
{
HRESULT hr;
DSoundVoiceOut *ds = (DSoundVoiceOut *) hw;
LPDIRECTSOUNDBUFFER dsb = ds->dsound_buffer;
int err = dsound_unlock_out(dsb, buf, NULL, len, 0);
int len, hwshift;
DWORD blen1, blen2;
DWORD len1, len2;
DWORD decr;
DWORD wpos, ppos, old_pos;
LPVOID p1, p2;
int bufsize;
dsound *s = ds->s;
DSoundConf *conf = &s->conf;
if (err) {
dolog("Failed to unlock buffer!!\n");
if (!dsb) {
dolog ("Attempt to run empty with playback buffer\n");
return 0;
}
hw->pos_emul = (hw->pos_emul + len) % hw->size_emul;
return len;
hwshift = hw->info.shift;
bufsize = hw->samples << hwshift;
hr = IDirectSoundBuffer_GetCurrentPosition (
dsb,
&ppos,
ds->first_time ? &wpos : NULL
);
if (FAILED (hr)) {
dsound_logerr (hr, "Could not get playback buffer position\n");
return 0;
}
len = live << hwshift;
if (ds->first_time) {
if (conf->latency_millis) {
DWORD cur_blat;
cur_blat = audio_ring_dist (wpos, ppos, bufsize);
ds->first_time = 0;
old_pos = wpos;
old_pos +=
millis_to_bytes (&hw->info, conf->latency_millis) - cur_blat;
old_pos %= bufsize;
old_pos &= ~hw->info.align;
}
else {
old_pos = wpos;
}
#ifdef DEBUG_DSOUND
ds->played = 0;
ds->mixed = 0;
#endif
}
else {
if (ds->old_pos == ppos) {
#ifdef DEBUG_DSOUND
dolog ("old_pos == ppos\n");
#endif
return 0;
}
#ifdef DEBUG_DSOUND
ds->played += audio_ring_dist (ds->old_pos, ppos, hw->bufsize);
#endif
old_pos = ds->old_pos;
}
if ((old_pos < ppos) && ((old_pos + len) > ppos)) {
len = ppos - old_pos;
}
else {
if ((old_pos > ppos) && ((old_pos + len) > (ppos + bufsize))) {
len = bufsize - old_pos + ppos;
}
}
if (audio_bug(__func__, len < 0 || len > bufsize)) {
dolog ("len=%d bufsize=%d old_pos=%ld ppos=%ld\n",
len, bufsize, old_pos, ppos);
return 0;
}
len &= ~hw->info.align;
if (!len) {
return 0;
}
#ifdef DEBUG_DSOUND
ds->old_ppos = ppos;
#endif
err = dsound_lock_out (
dsb,
&hw->info,
old_pos,
len,
&p1, &p2,
&blen1, &blen2,
0,
s
);
if (err) {
return 0;
}
len1 = blen1 >> hwshift;
len2 = blen2 >> hwshift;
decr = len1 + len2;
if (p1 && len1) {
dsound_write_sample (hw, p1, len1);
}
if (p2 && len2) {
dsound_write_sample (hw, p2, len2);
}
dsound_unlock_out (dsb, p1, p2, blen1, blen2);
ds->old_pos = (old_pos + (decr << hwshift)) % bufsize;
#ifdef DEBUG_DSOUND
ds->mixed += decr << hwshift;
dolog ("played %lu mixed %lu diff %ld sec %f\n",
ds->played,
ds->mixed,
ds->mixed - ds->played,
abs (ds->mixed - ds->played) / (double) hw->info.bytes_per_second);
#endif
return decr;
}
static void dsound_enable_in(HWVoiceIn *hw, bool enable)
static int dsound_ctl_in (HWVoiceIn *hw, int cmd, ...)
{
HRESULT hr;
DWORD status;
@@ -478,17 +607,18 @@ static void dsound_enable_in(HWVoiceIn *hw, bool enable)
if (!dscb) {
dolog ("Attempt to control capture voice without a buffer\n");
return;
return -1;
}
if (enable) {
switch (cmd) {
case VOICE_ENABLE:
if (dsound_get_status_in (dscb, &status)) {
return;
return -1;
}
if (status & DSCBSTATUS_CAPTURING) {
dolog ("warning: Voice is already capturing\n");
return;
return 0;
}
/* clear ?? */
@@ -496,81 +626,132 @@ static void dsound_enable_in(HWVoiceIn *hw, bool enable)
hr = IDirectSoundCaptureBuffer_Start (dscb, DSCBSTART_LOOPING);
if (FAILED (hr)) {
dsound_logerr (hr, "Could not start capturing\n");
return;
return -1;
}
} else {
break;
case VOICE_DISABLE:
if (dsound_get_status_in (dscb, &status)) {
return;
return -1;
}
if (status & DSCBSTATUS_CAPTURING) {
hr = IDirectSoundCaptureBuffer_Stop (dscb);
if (FAILED (hr)) {
dsound_logerr (hr, "Could not stop capturing\n");
return;
return -1;
}
}
else {
dolog ("warning: Voice is not capturing\n");
}
break;
}
return 0;
}
static void *dsound_get_buffer_in(HWVoiceIn *hw, size_t *size)
static int dsound_read (SWVoiceIn *sw, void *buf, int len)
{
return audio_pcm_sw_read (sw, buf, len);
}
static int dsound_run_in (HWVoiceIn *hw)
{
int err;
HRESULT hr;
DSoundVoiceIn *ds = (DSoundVoiceIn *) hw;
LPDIRECTSOUNDCAPTUREBUFFER dscb = ds->dsound_capture_buffer;
HRESULT hr;
DWORD cpos, rpos, act_size;
size_t req_size;
int err;
void *ret;
int live, len, dead;
DWORD blen1, blen2;
DWORD len1, len2;
DWORD decr;
DWORD cpos, rpos;
LPVOID p1, p2;
int hwshift;
dsound *s = ds->s;
hr = IDirectSoundCaptureBuffer_GetCurrentPosition(
dscb, &cpos, ds->first_time ? &rpos : NULL);
if (FAILED(hr)) {
dsound_logerr(hr, "Could not get capture buffer position\n");
*size = 0;
return NULL;
if (!dscb) {
dolog ("Attempt to run without capture buffer\n");
return 0;
}
hwshift = hw->info.shift;
live = audio_pcm_hw_get_live_in (hw);
dead = hw->samples - live;
if (!dead) {
return 0;
}
hr = IDirectSoundCaptureBuffer_GetCurrentPosition (
dscb,
&cpos,
ds->first_time ? &rpos : NULL
);
if (FAILED (hr)) {
dsound_logerr (hr, "Could not get capture buffer position\n");
return 0;
}
if (ds->first_time) {
hw->pos_emul = rpos;
ds->first_time = false;
ds->first_time = 0;
if (rpos & hw->info.align) {
ldebug ("warning: Misaligned capture read position %ld(%d)\n",
rpos, hw->info.align);
}
hw->wpos = rpos >> hwshift;
}
req_size = audio_ring_dist(cpos, hw->pos_emul, hw->size_emul);
req_size = MIN(*size, MIN(req_size, hw->size_emul - hw->pos_emul));
if (req_size == 0) {
*size = 0;
return NULL;
if (cpos & hw->info.align) {
ldebug ("warning: Misaligned capture position %ld(%d)\n",
cpos, hw->info.align);
}
cpos >>= hwshift;
err = dsound_lock_in(dscb, &hw->info, hw->pos_emul, req_size, &ret, NULL,
&act_size, NULL, false, ds->s);
len = audio_ring_dist (cpos, hw->wpos, hw->samples);
if (!len) {
return 0;
}
len = audio_MIN (len, dead);
err = dsound_lock_in (
dscb,
&hw->info,
hw->wpos << hwshift,
len << hwshift,
&p1,
&p2,
&blen1,
&blen2,
0,
s
);
if (err) {
dolog("Failed to lock buffer\n");
*size = 0;
return NULL;
return 0;
}
*size = act_size;
return ret;
len1 = blen1 >> hwshift;
len2 = blen2 >> hwshift;
decr = len1 + len2;
if (p1 && len1) {
hw->conv (hw->conv_buf + hw->wpos, p1, len1);
}
if (p2 && len2) {
hw->conv (hw->conv_buf, p2, len2);
}
dsound_unlock_in (dscb, p1, p2, blen1, blen2);
hw->wpos = (hw->wpos + decr) % hw->samples;
return decr;
}
static void dsound_put_buffer_in(HWVoiceIn *hw, void *buf, size_t len)
{
DSoundVoiceIn *ds = (DSoundVoiceIn *) hw;
LPDIRECTSOUNDCAPTUREBUFFER dscb = ds->dsound_capture_buffer;
int err = dsound_unlock_in(dscb, buf, NULL, len, 0);
if (err) {
dolog("Failed to unlock buffer!!\n");
return;
}
hw->pos_emul = (hw->pos_emul + len) % hw->size_emul;
}
static DSoundConf glob_conf = {
.bufsize_in = 16384,
.bufsize_out = 16384,
.latency_millis = 10
};
static void dsound_audio_fini (void *opaque)
{
@@ -602,22 +783,13 @@ static void dsound_audio_fini (void *opaque)
g_free(s);
}
static void *dsound_audio_init(Audiodev *dev)
static void *dsound_audio_init (void)
{
int err;
HRESULT hr;
dsound *s = g_malloc0(sizeof(dsound));
AudiodevDsoundOptions *dso;
assert(dev->driver == AUDIODEV_DRIVER_DSOUND);
s->dev = dev;
dso = &dev->u.dsound;
if (!dso->has_latency) {
dso->has_latency = true;
dso->latency = 10000; /* 10 ms */
}
s->conf = glob_conf;
hr = CoInitialize (NULL);
if (FAILED (hr)) {
dsound_logerr (hr, "Could not initialize COM\n");
@@ -682,25 +854,46 @@ static void *dsound_audio_init(Audiodev *dev)
return s;
}
static struct audio_option dsound_options[] = {
{
.name = "LATENCY_MILLIS",
.tag = AUD_OPT_INT,
.valp = &glob_conf.latency_millis,
.descr = "(undocumented)"
},
{
.name = "BUFSIZE_OUT",
.tag = AUD_OPT_INT,
.valp = &glob_conf.bufsize_out,
.descr = "(undocumented)"
},
{
.name = "BUFSIZE_IN",
.tag = AUD_OPT_INT,
.valp = &glob_conf.bufsize_in,
.descr = "(undocumented)"
},
{ /* End of list */ }
};
static struct audio_pcm_ops dsound_pcm_ops = {
.init_out = dsound_init_out,
.fini_out = dsound_fini_out,
.write = audio_generic_write,
.get_buffer_out = dsound_get_buffer_out,
.put_buffer_out = dsound_put_buffer_out,
.enable_out = dsound_enable_out,
.run_out = dsound_run_out,
.write = dsound_write,
.ctl_out = dsound_ctl_out,
.init_in = dsound_init_in,
.fini_in = dsound_fini_in,
.read = audio_generic_read,
.get_buffer_in = dsound_get_buffer_in,
.put_buffer_in = dsound_put_buffer_in,
.enable_in = dsound_enable_in,
.run_in = dsound_run_in,
.read = dsound_read,
.ctl_in = dsound_ctl_in
};
static struct audio_driver dsound_audio_driver = {
.name = "dsound",
.descr = "DirectSound http://wikipedia.org/wiki/DirectSound",
.options = dsound_options,
.init = dsound_audio_init,
.fini = dsound_audio_fini,
.pcm_ops = &dsound_pcm_ops,
+1 -70
View File
@@ -23,6 +23,7 @@
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "qemu/bswap.h"
#include "qemu/error-report.h"
#include "audio.h"
@@ -267,76 +268,6 @@ f_sample *mixeng_clip[2][2][2][3] = {
}
};
#ifdef FLOAT_MIXENG
#define CONV_NATURAL_FLOAT(x) (x)
#define CLIP_NATURAL_FLOAT(x) (x)
#else
static const float float_scale = UINT_MAX / 2.f;
#define CONV_NATURAL_FLOAT(x) ((x) * float_scale)
#ifdef RECIPROCAL
static const float float_scale_reciprocal = 2.f / UINT_MAX;
#define CLIP_NATURAL_FLOAT(x) ((x) * float_scale_reciprocal)
#else
#define CLIP_NATURAL_FLOAT(x) ((x) / float_scale)
#endif
#endif
static void conv_natural_float_to_mono(struct st_sample *dst, const void *src,
int samples)
{
float *in = (float *)src;
while (samples--) {
dst->r = dst->l = CONV_NATURAL_FLOAT(*in++);
dst++;
}
}
static void conv_natural_float_to_stereo(struct st_sample *dst, const void *src,
int samples)
{
float *in = (float *)src;
while (samples--) {
dst->l = CONV_NATURAL_FLOAT(*in++);
dst->r = CONV_NATURAL_FLOAT(*in++);
dst++;
}
}
t_sample *mixeng_conv_float[2] = {
conv_natural_float_to_mono,
conv_natural_float_to_stereo,
};
static void clip_natural_float_from_mono(void *dst, const struct st_sample *src,
int samples)
{
float *out = (float *)dst;
while (samples--) {
*out++ = CLIP_NATURAL_FLOAT(src->l + src->r);
src++;
}
}
static void clip_natural_float_from_stereo(
void *dst, const struct st_sample *src, int samples)
{
float *out = (float *)dst;
while (samples--) {
*out++ = CLIP_NATURAL_FLOAT(src->l);
*out++ = CLIP_NATURAL_FLOAT(src->r);
src++;
}
}
f_sample *mixeng_clip_float[2] = {
clip_natural_float_from_mono,
clip_natural_float_from_stereo,
};
void audio_sample_to_uint64(void *samples, int pos,
uint64_t *left, uint64_t *right)
+4 -10
View File
@@ -33,24 +33,18 @@ struct st_sample { mixeng_real l; mixeng_real r; };
struct mixeng_volume { int mute; int64_t r; int64_t l; };
struct st_sample { int64_t l; int64_t r; };
#endif
typedef struct st_sample st_sample;
typedef void (t_sample) (struct st_sample *dst, const void *src, int samples);
typedef void (f_sample) (void *dst, const struct st_sample *src, int samples);
/* indices: [stereo][signed][swap endiannes][8, 16 or 32-bits] */
extern t_sample *mixeng_conv[2][2][2][3];
extern f_sample *mixeng_clip[2][2][2][3];
/* indices: [stereo] */
extern t_sample *mixeng_conv_float[2];
extern f_sample *mixeng_clip_float[2];
void *st_rate_start (int inrate, int outrate);
void st_rate_flow(void *opaque, st_sample *ibuf, st_sample *obuf,
size_t *isamp, size_t *osamp);
void st_rate_flow_mix(void *opaque, st_sample *ibuf, st_sample *obuf,
size_t *isamp, size_t *osamp);
void st_rate_flow (void *opaque, struct st_sample *ibuf, struct st_sample *obuf,
int *isamp, int *osamp);
void st_rate_flow_mix (void *opaque, struct st_sample *ibuf, struct st_sample *obuf,
int *isamp, int *osamp);
void st_rate_stop (void *opaque);
void mixeng_clear (struct st_sample *buf, int len);
void mixeng_volume (struct st_sample *buf, int len, struct mixeng_volume *vol);
+12 -10
View File
@@ -41,31 +41,32 @@ static inline mixeng_real glue (conv_, ET) (IN_T v)
#ifdef RECIPROCAL
#ifdef SIGNED
return nv * (2.f / ((mixeng_real)IN_MAX - IN_MIN));
return nv * (1.f / (mixeng_real) (IN_MAX - IN_MIN));
#else
return (nv - HALF) * (2.f / (mixeng_real)IN_MAX);
return (nv - HALF) * (1.f / (mixeng_real) IN_MAX);
#endif
#else /* !RECIPROCAL */
#ifdef SIGNED
return nv / (((mixeng_real)IN_MAX - IN_MIN) / 2.f);
return nv / (mixeng_real) ((mixeng_real) IN_MAX - IN_MIN);
#else
return (nv - HALF) / ((mixeng_real)IN_MAX / 2.f);
return (nv - HALF) / (mixeng_real) IN_MAX;
#endif
#endif
}
static inline IN_T glue (clip_, ET) (mixeng_real v)
{
if (v >= 1.f) {
if (v >= 0.5) {
return IN_MAX;
} else if (v < -1.f) {
}
else if (v < -0.5) {
return IN_MIN;
}
#ifdef SIGNED
return ENDIAN_CONVERT((IN_T)(v * (((mixeng_real)IN_MAX - IN_MIN) / 2.f)));
return ENDIAN_CONVERT ((IN_T) (v * ((mixeng_real) IN_MAX - IN_MIN)));
#else
return ENDIAN_CONVERT((IN_T)((v * ((mixeng_real)IN_MAX / 2.f)) + HALF));
return ENDIAN_CONVERT ((IN_T) ((v * IN_MAX) + HALF));
#endif
}
@@ -83,9 +84,10 @@ static inline int64_t glue (conv_, ET) (IN_T v)
static inline IN_T glue (clip_, ET) (int64_t v)
{
if (v >= 0x7fffffffLL) {
if (v >= 0x7f000000) {
return IN_MAX;
} else if (v < -2147483648LL) {
}
else if (v < -2147483648LL) {
return IN_MIN;
}
+67 -33
View File
@@ -21,10 +21,9 @@
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "qemu/host-utils.h"
#include "qemu/module.h"
#include "audio.h"
#include "qemu/timer.h"
@@ -33,27 +32,43 @@
typedef struct NoVoiceOut {
HWVoiceOut hw;
RateCtl rate;
int64_t old_ticks;
} NoVoiceOut;
typedef struct NoVoiceIn {
HWVoiceIn hw;
RateCtl rate;
int64_t old_ticks;
} NoVoiceIn;
static size_t no_write(HWVoiceOut *hw, void *buf, size_t len)
static int no_run_out (HWVoiceOut *hw, int live)
{
NoVoiceOut *no = (NoVoiceOut *) hw;
return audio_rate_get_bytes(&hw->info, &no->rate, len);
int decr, samples;
int64_t now;
int64_t ticks;
int64_t bytes;
now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
ticks = now - no->old_ticks;
bytes = muldiv64(ticks, hw->info.bytes_per_second, NANOSECONDS_PER_SECOND);
bytes = audio_MIN(bytes, INT_MAX);
samples = bytes >> hw->info.shift;
no->old_ticks = now;
decr = audio_MIN (live, samples);
hw->rpos = (hw->rpos + decr) % hw->samples;
return decr;
}
static int no_write (SWVoiceOut *sw, void *buf, int len)
{
return audio_pcm_sw_write(sw, buf, len);
}
static int no_init_out(HWVoiceOut *hw, struct audsettings *as, void *drv_opaque)
{
NoVoiceOut *no = (NoVoiceOut *) hw;
audio_pcm_init_info (&hw->info, as);
hw->samples = 1024;
audio_rate_start(&no->rate);
return 0;
}
@@ -62,22 +77,17 @@ static void no_fini_out (HWVoiceOut *hw)
(void) hw;
}
static void no_enable_out(HWVoiceOut *hw, bool enable)
static int no_ctl_out (HWVoiceOut *hw, int cmd, ...)
{
NoVoiceOut *no = (NoVoiceOut *) hw;
if (enable) {
audio_rate_start(&no->rate);
}
(void) hw;
(void) cmd;
return 0;
}
static int no_init_in(HWVoiceIn *hw, struct audsettings *as, void *drv_opaque)
{
NoVoiceIn *no = (NoVoiceIn *) hw;
audio_pcm_init_info (&hw->info, as);
hw->samples = 1024;
audio_rate_start(&no->rate);
return 0;
}
@@ -86,25 +96,47 @@ static void no_fini_in (HWVoiceIn *hw)
(void) hw;
}
static size_t no_read(HWVoiceIn *hw, void *buf, size_t size)
static int no_run_in (HWVoiceIn *hw)
{
NoVoiceIn *no = (NoVoiceIn *) hw;
int64_t bytes = audio_rate_get_bytes(&hw->info, &no->rate, size);
int live = audio_pcm_hw_get_live_in (hw);
int dead = hw->samples - live;
int samples = 0;
audio_pcm_info_clear_buf(&hw->info, buf, bytes / hw->info.bytes_per_frame);
return bytes;
}
if (dead) {
int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
int64_t ticks = now - no->old_ticks;
int64_t bytes =
muldiv64(ticks, hw->info.bytes_per_second, NANOSECONDS_PER_SECOND);
static void no_enable_in(HWVoiceIn *hw, bool enable)
{
NoVoiceIn *no = (NoVoiceIn *) hw;
if (enable) {
audio_rate_start(&no->rate);
no->old_ticks = now;
bytes = audio_MIN (bytes, INT_MAX);
samples = bytes >> hw->info.shift;
samples = audio_MIN (samples, dead);
}
return samples;
}
static void *no_audio_init(Audiodev *dev)
static int no_read (SWVoiceIn *sw, void *buf, int size)
{
/* use custom code here instead of audio_pcm_sw_read() to avoid
* useless resampling/mixing */
int samples = size >> sw->info.shift;
int total = sw->hw->total_samples_captured - sw->total_hw_samples_acquired;
int to_clear = audio_MIN (samples, total);
sw->total_hw_samples_acquired += total;
audio_pcm_info_clear_buf (&sw->info, buf, to_clear);
return to_clear << sw->info.shift;
}
static int no_ctl_in (HWVoiceIn *hw, int cmd, ...)
{
(void) hw;
(void) cmd;
return 0;
}
static void *no_audio_init (void)
{
return &no_audio_init;
}
@@ -117,19 +149,21 @@ static void no_audio_fini (void *opaque)
static struct audio_pcm_ops no_pcm_ops = {
.init_out = no_init_out,
.fini_out = no_fini_out,
.run_out = no_run_out,
.write = no_write,
.run_buffer_out = audio_generic_run_buffer_out,
.enable_out = no_enable_out,
.ctl_out = no_ctl_out,
.init_in = no_init_in,
.fini_in = no_fini_in,
.run_in = no_run_in,
.read = no_read,
.enable_in = no_enable_in
.ctl_in = no_ctl_in
};
static struct audio_driver no_audio_driver = {
.name = "none",
.descr = "Timer based audio emulation",
.options = NULL,
.init = no_audio_init,
.fini = no_audio_fini,
.pcm_ops = &no_pcm_ops,
+382 -223
View File
@@ -21,12 +21,11 @@
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include <sys/ioctl.h>
#include <sys/soundcard.h>
#include "qemu-common.h"
#include "qemu/main-loop.h"
#include "qemu/module.h"
#include "qemu/host-utils.h"
#include "audio.h"
#include "trace.h"
@@ -38,26 +37,40 @@
#define USE_DSP_POLICY
#endif
typedef struct OSSConf {
int try_mmap;
int nfrags;
int fragsize;
const char *devpath_out;
const char *devpath_in;
int exclusive;
int policy;
} OSSConf;
typedef struct OSSVoiceOut {
HWVoiceOut hw;
void *pcm_buf;
int fd;
int wpos;
int nfrags;
int fragsize;
int mmapped;
Audiodev *dev;
int pending;
OSSConf *conf;
} OSSVoiceOut;
typedef struct OSSVoiceIn {
HWVoiceIn hw;
void *pcm_buf;
int fd;
int nfrags;
int fragsize;
Audiodev *dev;
OSSConf *conf;
} OSSVoiceIn;
struct oss_params {
int freq;
int fmt;
audfmt_e fmt;
int nchannels;
int nfrags;
int fragsize;
@@ -106,40 +119,45 @@ static void oss_anal_close (int *fdp)
static void oss_helper_poll_out (void *opaque)
{
AudioState *s = opaque;
audio_run(s, "oss_poll_out");
(void) opaque;
audio_run ("oss_poll_out");
}
static void oss_helper_poll_in (void *opaque)
{
AudioState *s = opaque;
audio_run(s, "oss_poll_in");
(void) opaque;
audio_run ("oss_poll_in");
}
static void oss_poll_out (HWVoiceOut *hw)
{
OSSVoiceOut *oss = (OSSVoiceOut *) hw;
qemu_set_fd_handler(oss->fd, NULL, oss_helper_poll_out, hw->s);
qemu_set_fd_handler (oss->fd, NULL, oss_helper_poll_out, NULL);
}
static void oss_poll_in (HWVoiceIn *hw)
{
OSSVoiceIn *oss = (OSSVoiceIn *) hw;
qemu_set_fd_handler(oss->fd, oss_helper_poll_in, NULL, hw->s);
qemu_set_fd_handler (oss->fd, oss_helper_poll_in, NULL, NULL);
}
static int aud_to_ossfmt (AudioFormat fmt, int endianness)
static int oss_write (SWVoiceOut *sw, void *buf, int len)
{
return audio_pcm_sw_write (sw, buf, len);
}
static int aud_to_ossfmt (audfmt_e fmt, int endianness)
{
switch (fmt) {
case AUDIO_FORMAT_S8:
case AUD_FMT_S8:
return AFMT_S8;
case AUDIO_FORMAT_U8:
case AUD_FMT_U8:
return AFMT_U8;
case AUDIO_FORMAT_S16:
case AUD_FMT_S16:
if (endianness) {
return AFMT_S16_BE;
}
@@ -147,7 +165,7 @@ static int aud_to_ossfmt (AudioFormat fmt, int endianness)
return AFMT_S16_LE;
}
case AUDIO_FORMAT_U16:
case AUD_FMT_U16:
if (endianness) {
return AFMT_U16_BE;
}
@@ -164,37 +182,37 @@ static int aud_to_ossfmt (AudioFormat fmt, int endianness)
}
}
static int oss_to_audfmt (int ossfmt, AudioFormat *fmt, int *endianness)
static int oss_to_audfmt (int ossfmt, audfmt_e *fmt, int *endianness)
{
switch (ossfmt) {
case AFMT_S8:
*endianness = 0;
*fmt = AUDIO_FORMAT_S8;
*fmt = AUD_FMT_S8;
break;
case AFMT_U8:
*endianness = 0;
*fmt = AUDIO_FORMAT_U8;
*fmt = AUD_FMT_U8;
break;
case AFMT_S16_LE:
*endianness = 0;
*fmt = AUDIO_FORMAT_S16;
*fmt = AUD_FMT_S16;
break;
case AFMT_U16_LE:
*endianness = 0;
*fmt = AUDIO_FORMAT_U16;
*fmt = AUD_FMT_U16;
break;
case AFMT_S16_BE:
*endianness = 1;
*fmt = AUDIO_FORMAT_S16;
*fmt = AUD_FMT_S16;
break;
case AFMT_U16_BE:
*endianness = 1;
*fmt = AUDIO_FORMAT_U16;
*fmt = AUD_FMT_U16;
break;
default:
@@ -244,25 +262,19 @@ static int oss_get_version (int fd, int *version, const char *typ)
}
#endif
static int oss_open(int in, struct oss_params *req, audsettings *as,
struct oss_params *obt, int *pfd, Audiodev *dev)
static int oss_open (int in, struct oss_params *req,
struct oss_params *obt, int *pfd, OSSConf* conf)
{
AudiodevOssOptions *oopts = &dev->u.oss;
AudiodevOssPerDirectionOptions *opdo = in ? oopts->in : oopts->out;
int fd;
int oflags = (oopts->has_exclusive && oopts->exclusive) ? O_EXCL : 0;
int oflags = conf->exclusive ? O_EXCL : 0;
audio_buf_info abinfo;
int fmt, freq, nchannels;
int setfragment = 1;
const char *dspname = opdo->has_dev ? opdo->dev : "/dev/dsp";
const char *dspname = in ? conf->devpath_in : conf->devpath_out;
const char *typ = in ? "ADC" : "DAC";
#ifdef USE_DSP_POLICY
int policy = oopts->has_dsp_policy ? oopts->dsp_policy : 5;
#endif
/* Kludge needed to have working mmap on Linux */
oflags |= (oopts->has_try_mmap && oopts->try_mmap) ?
O_RDWR : (in ? O_RDONLY : O_WRONLY);
oflags |= conf->try_mmap ? O_RDWR : (in ? O_RDONLY : O_WRONLY);
fd = open (dspname, oflags | O_NONBLOCK);
if (-1 == fd) {
@@ -273,9 +285,6 @@ static int oss_open(int in, struct oss_params *req, audsettings *as,
freq = req->freq;
nchannels = req->nchannels;
fmt = req->fmt;
req->nfrags = opdo->has_buffer_count ? opdo->buffer_count : 4;
req->fragsize = audio_buffer_bytes(
qapi_AudiodevOssPerDirectionOptions_base(opdo), as, 23220);
if (ioctl (fd, SNDCTL_DSP_SAMPLESIZE, &fmt)) {
oss_logerr2 (errno, typ, "Failed to set sample size %d\n", req->fmt);
@@ -299,18 +308,18 @@ static int oss_open(int in, struct oss_params *req, audsettings *as,
}
#ifdef USE_DSP_POLICY
if (policy >= 0) {
if (conf->policy >= 0) {
int version;
if (!oss_get_version (fd, &version, typ)) {
trace_oss_version(version);
if (version >= 0x040000) {
int policy2 = policy;
if (ioctl(fd, SNDCTL_DSP_POLICY, &policy2)) {
int policy = conf->policy;
if (ioctl (fd, SNDCTL_DSP_POLICY, &policy)) {
oss_logerr2 (errno, typ,
"Failed to set timing policy to %d\n",
policy);
conf->policy);
goto err;
}
setfragment = 0;
@@ -367,96 +376,97 @@ static int oss_open(int in, struct oss_params *req, audsettings *as,
return -1;
}
static size_t oss_get_available_bytes(OSSVoiceOut *oss)
static void oss_write_pending (OSSVoiceOut *oss)
{
int err;
struct count_info cntinfo;
assert(oss->mmapped);
err = ioctl(oss->fd, SNDCTL_DSP_GETOPTR, &cntinfo);
if (err < 0) {
oss_logerr(errno, "SNDCTL_DSP_GETOPTR failed\n");
return 0;
}
return audio_ring_dist(cntinfo.ptr, oss->hw.pos_emul, oss->hw.size_emul);
}
static void oss_run_buffer_out(HWVoiceOut *hw)
{
OSSVoiceOut *oss = (OSSVoiceOut *)hw;
if (!oss->mmapped) {
audio_generic_run_buffer_out(hw);
}
}
static void *oss_get_buffer_out(HWVoiceOut *hw, size_t *size)
{
OSSVoiceOut *oss = (OSSVoiceOut *) hw;
if (oss->mmapped) {
*size = MIN(oss_get_available_bytes(oss), hw->size_emul - hw->pos_emul);
return hw->buf_emul + hw->pos_emul;
} else {
return audio_generic_get_buffer_out(hw, size);
}
}
static size_t oss_put_buffer_out(HWVoiceOut *hw, void *buf, size_t size)
{
OSSVoiceOut *oss = (OSSVoiceOut *) hw;
if (oss->mmapped) {
assert(buf == hw->buf_emul + hw->pos_emul && size < hw->size_emul);
hw->pos_emul = (hw->pos_emul + size) % hw->size_emul;
return size;
} else {
return audio_generic_put_buffer_out(hw, buf, size);
}
}
static size_t oss_write(HWVoiceOut *hw, void *buf, size_t len)
{
OSSVoiceOut *oss = (OSSVoiceOut *) hw;
size_t pos;
HWVoiceOut *hw = &oss->hw;
if (oss->mmapped) {
size_t total_len;
len = MIN(len, oss_get_available_bytes(oss));
total_len = len;
while (len) {
size_t to_copy = MIN(len, hw->size_emul - hw->pos_emul);
memcpy(hw->buf_emul + hw->pos_emul, buf, to_copy);
hw->pos_emul = (hw->pos_emul + to_copy) % hw->size_emul;
buf += to_copy;
len -= to_copy;
}
return total_len;
return;
}
pos = 0;
while (len) {
while (oss->pending) {
int samples_written;
ssize_t bytes_written;
void *pcm = advance(buf, pos);
int samples_till_end = hw->samples - oss->wpos;
int samples_to_write = audio_MIN (oss->pending, samples_till_end);
int bytes_to_write = samples_to_write << hw->info.shift;
void *pcm = advance (oss->pcm_buf, oss->wpos << hw->info.shift);
bytes_written = write(oss->fd, pcm, len);
bytes_written = write (oss->fd, pcm, bytes_to_write);
if (bytes_written < 0) {
if (errno != EAGAIN) {
oss_logerr(errno, "failed to write %zu bytes\n",
len);
oss_logerr (errno, "failed to write %d bytes\n",
bytes_to_write);
}
return pos;
}
pos += bytes_written;
if (bytes_written < len) {
break;
}
len -= bytes_written;
if (bytes_written & hw->info.align) {
dolog ("misaligned write asked for %d, but got %zd\n",
bytes_to_write, bytes_written);
return;
}
samples_written = bytes_written >> hw->info.shift;
oss->pending -= samples_written;
oss->wpos = (oss->wpos + samples_written) % hw->samples;
if (bytes_written - bytes_to_write) {
break;
}
}
return pos;
}
static int oss_run_out (HWVoiceOut *hw, int live)
{
OSSVoiceOut *oss = (OSSVoiceOut *) hw;
int err, decr;
struct audio_buf_info abinfo;
struct count_info cntinfo;
int bufsize;
bufsize = hw->samples << hw->info.shift;
if (oss->mmapped) {
int bytes, pos;
err = ioctl (oss->fd, SNDCTL_DSP_GETOPTR, &cntinfo);
if (err < 0) {
oss_logerr (errno, "SNDCTL_DSP_GETOPTR failed\n");
return 0;
}
pos = hw->rpos << hw->info.shift;
bytes = audio_ring_dist (cntinfo.ptr, pos, bufsize);
decr = audio_MIN (bytes >> hw->info.shift, live);
}
else {
err = ioctl (oss->fd, SNDCTL_DSP_GETOSPACE, &abinfo);
if (err < 0) {
oss_logerr (errno, "SNDCTL_DSP_GETOPTR failed\n");
return 0;
}
if (abinfo.bytes > bufsize) {
trace_oss_invalid_available_size(abinfo.bytes, bufsize);
abinfo.bytes = bufsize;
}
if (abinfo.bytes < 0) {
trace_oss_invalid_available_size(abinfo.bytes, bufsize);
return 0;
}
decr = audio_MIN (abinfo.bytes >> hw->info.shift, live);
if (!decr) {
return 0;
}
}
decr = audio_pcm_hw_clip_out (hw, oss->pcm_buf, decr, oss->pending);
oss->pending += decr;
oss_write_pending (oss);
return decr;
}
static void oss_fini_out (HWVoiceOut *hw)
@@ -467,13 +477,18 @@ static void oss_fini_out (HWVoiceOut *hw)
ldebug ("oss_fini\n");
oss_anal_close (&oss->fd);
if (oss->mmapped && hw->buf_emul) {
err = munmap(hw->buf_emul, hw->size_emul);
if (err) {
oss_logerr(errno, "Failed to unmap buffer %p, size %zu\n",
hw->buf_emul, hw->size_emul);
if (oss->pcm_buf) {
if (oss->mmapped) {
err = munmap (oss->pcm_buf, hw->samples << hw->info.shift);
if (err) {
oss_logerr (errno, "Failed to unmap buffer %p, size %d\n",
oss->pcm_buf, hw->samples << hw->info.shift);
}
}
hw->buf_emul = NULL;
else {
g_free (oss->pcm_buf);
}
oss->pcm_buf = NULL;
}
}
@@ -485,18 +500,19 @@ static int oss_init_out(HWVoiceOut *hw, struct audsettings *as,
int endianness;
int err;
int fd;
AudioFormat effective_fmt;
audfmt_e effective_fmt;
struct audsettings obt_as;
Audiodev *dev = drv_opaque;
AudiodevOssOptions *oopts = &dev->u.oss;
OSSConf *conf = drv_opaque;
oss->fd = -1;
req.fmt = aud_to_ossfmt (as->fmt, as->endianness);
req.freq = as->freq;
req.nchannels = as->nchannels;
req.fragsize = conf->fragsize;
req.nfrags = conf->nfrags;
if (oss_open(0, &req, as, &obt, &fd, dev)) {
if (oss_open (0, &req, &obt, &fd, conf)) {
return -1;
}
@@ -515,29 +531,28 @@ static int oss_init_out(HWVoiceOut *hw, struct audsettings *as,
oss->nfrags = obt.nfrags;
oss->fragsize = obt.fragsize;
if (obt.nfrags * obt.fragsize % hw->info.bytes_per_frame) {
if (obt.nfrags * obt.fragsize & hw->info.align) {
dolog ("warning: Misaligned DAC buffer, size %d, alignment %d\n",
obt.nfrags * obt.fragsize, hw->info.bytes_per_frame);
obt.nfrags * obt.fragsize, hw->info.align + 1);
}
hw->samples = (obt.nfrags * obt.fragsize) / hw->info.bytes_per_frame;
hw->samples = (obt.nfrags * obt.fragsize) >> hw->info.shift;
oss->mmapped = 0;
if (oopts->has_try_mmap && oopts->try_mmap) {
hw->size_emul = hw->samples * hw->info.bytes_per_frame;
hw->buf_emul = mmap(
if (conf->try_mmap) {
oss->pcm_buf = mmap (
NULL,
hw->size_emul,
hw->samples << hw->info.shift,
PROT_READ | PROT_WRITE,
MAP_SHARED,
fd,
0
);
if (hw->buf_emul == MAP_FAILED) {
oss_logerr(errno, "Failed to map %zu bytes of DAC\n",
hw->size_emul);
hw->buf_emul = NULL;
} else {
if (oss->pcm_buf == MAP_FAILED) {
oss_logerr (errno, "Failed to map %d bytes of DAC\n",
hw->samples << hw->info.shift);
}
else {
int err;
int trig = 0;
if (ioctl (fd, SNDCTL_DSP_SETTRIGGER, &trig) < 0) {
@@ -557,63 +572,92 @@ static int oss_init_out(HWVoiceOut *hw, struct audsettings *as,
}
if (!oss->mmapped) {
err = munmap(hw->buf_emul, hw->size_emul);
err = munmap (oss->pcm_buf, hw->samples << hw->info.shift);
if (err) {
oss_logerr(errno, "Failed to unmap buffer %p size %zu\n",
hw->buf_emul, hw->size_emul);
oss_logerr (errno, "Failed to unmap buffer %p size %d\n",
oss->pcm_buf, hw->samples << hw->info.shift);
}
hw->buf_emul = NULL;
}
}
}
if (!oss->mmapped) {
oss->pcm_buf = audio_calloc(__func__,
hw->samples,
1 << hw->info.shift);
if (!oss->pcm_buf) {
dolog (
"Could not allocate DAC buffer (%d samples, each %d bytes)\n",
hw->samples,
1 << hw->info.shift
);
oss_anal_close (&fd);
return -1;
}
}
oss->fd = fd;
oss->dev = dev;
oss->conf = conf;
return 0;
}
static void oss_enable_out(HWVoiceOut *hw, bool enable)
static int oss_ctl_out (HWVoiceOut *hw, int cmd, ...)
{
int trig;
OSSVoiceOut *oss = (OSSVoiceOut *) hw;
AudiodevOssPerDirectionOptions *opdo = oss->dev->u.oss.out;
if (enable) {
hw->poll_mode = opdo->try_poll;
switch (cmd) {
case VOICE_ENABLE:
{
va_list ap;
int poll_mode;
ldebug("enabling voice\n");
if (hw->poll_mode) {
oss_poll_out(hw);
va_start (ap, cmd);
poll_mode = va_arg (ap, int);
va_end (ap);
ldebug ("enabling voice\n");
if (poll_mode) {
oss_poll_out (hw);
poll_mode = 0;
}
hw->poll_mode = poll_mode;
if (!oss->mmapped) {
return 0;
}
audio_pcm_info_clear_buf (&hw->info, oss->pcm_buf, hw->samples);
trig = PCM_ENABLE_OUTPUT;
if (ioctl (oss->fd, SNDCTL_DSP_SETTRIGGER, &trig) < 0) {
oss_logerr (
errno,
"SNDCTL_DSP_SETTRIGGER PCM_ENABLE_OUTPUT failed\n"
);
return -1;
}
}
break;
if (!oss->mmapped) {
return;
}
audio_pcm_info_clear_buf(&hw->info, hw->buf_emul, hw->samples);
trig = PCM_ENABLE_OUTPUT;
if (ioctl(oss->fd, SNDCTL_DSP_SETTRIGGER, &trig) < 0) {
oss_logerr(errno,
"SNDCTL_DSP_SETTRIGGER PCM_ENABLE_OUTPUT failed\n");
return;
}
} else {
case VOICE_DISABLE:
if (hw->poll_mode) {
qemu_set_fd_handler (oss->fd, NULL, NULL, NULL);
hw->poll_mode = 0;
}
if (!oss->mmapped) {
return;
return 0;
}
ldebug ("disabling voice\n");
trig = 0;
if (ioctl (oss->fd, SNDCTL_DSP_SETTRIGGER, &trig) < 0) {
oss_logerr (errno, "SNDCTL_DSP_SETTRIGGER 0 failed\n");
return;
return -1;
}
break;
}
return 0;
}
static int oss_init_in(HWVoiceIn *hw, struct audsettings *as, void *drv_opaque)
@@ -623,16 +667,18 @@ static int oss_init_in(HWVoiceIn *hw, struct audsettings *as, void *drv_opaque)
int endianness;
int err;
int fd;
AudioFormat effective_fmt;
audfmt_e effective_fmt;
struct audsettings obt_as;
Audiodev *dev = drv_opaque;
OSSConf *conf = drv_opaque;
oss->fd = -1;
req.fmt = aud_to_ossfmt (as->fmt, as->endianness);
req.freq = as->freq;
req.nchannels = as->nchannels;
if (oss_open(1, &req, as, &obt, &fd, dev)) {
req.fragsize = conf->fragsize;
req.nfrags = conf->nfrags;
if (oss_open (1, &req, &obt, &fd, conf)) {
return -1;
}
@@ -651,15 +697,22 @@ static int oss_init_in(HWVoiceIn *hw, struct audsettings *as, void *drv_opaque)
oss->nfrags = obt.nfrags;
oss->fragsize = obt.fragsize;
if (obt.nfrags * obt.fragsize % hw->info.bytes_per_frame) {
if (obt.nfrags * obt.fragsize & hw->info.align) {
dolog ("warning: Misaligned ADC buffer, size %d, alignment %d\n",
obt.nfrags * obt.fragsize, hw->info.bytes_per_frame);
obt.nfrags * obt.fragsize, hw->info.align + 1);
}
hw->samples = (obt.nfrags * obt.fragsize) / hw->info.bytes_per_frame;
hw->samples = (obt.nfrags * obt.fragsize) >> hw->info.shift;
oss->pcm_buf = audio_calloc(__func__, hw->samples, 1 << hw->info.shift);
if (!oss->pcm_buf) {
dolog ("Could not allocate ADC buffer (%d samples, each %d bytes)\n",
hw->samples, 1 << hw->info.shift);
oss_anal_close (&fd);
return -1;
}
oss->fd = fd;
oss->dev = dev;
oss->conf = conf;
return 0;
}
@@ -668,105 +721,211 @@ static void oss_fini_in (HWVoiceIn *hw)
OSSVoiceIn *oss = (OSSVoiceIn *) hw;
oss_anal_close (&oss->fd);
g_free(oss->pcm_buf);
oss->pcm_buf = NULL;
}
static size_t oss_read(HWVoiceIn *hw, void *buf, size_t len)
static int oss_run_in (HWVoiceIn *hw)
{
OSSVoiceIn *oss = (OSSVoiceIn *) hw;
size_t pos = 0;
int hwshift = hw->info.shift;
int i;
int live = audio_pcm_hw_get_live_in (hw);
int dead = hw->samples - live;
size_t read_samples = 0;
struct {
int add;
int len;
} bufs[2] = {
{ .add = hw->wpos, .len = 0 },
{ .add = 0, .len = 0 }
};
while (len) {
if (!dead) {
return 0;
}
if (hw->wpos + dead > hw->samples) {
bufs[0].len = (hw->samples - hw->wpos) << hwshift;
bufs[1].len = (dead - (hw->samples - hw->wpos)) << hwshift;
}
else {
bufs[0].len = dead << hwshift;
}
for (i = 0; i < 2; ++i) {
ssize_t nread;
void *dst = advance(buf, pos);
nread = read(oss->fd, dst, len);
if (bufs[i].len) {
void *p = advance (oss->pcm_buf, bufs[i].add << hwshift);
nread = read (oss->fd, p, bufs[i].len);
if (nread == -1) {
switch (errno) {
case EINTR:
case EAGAIN:
break;
default:
oss_logerr(errno, "Failed to read %zu bytes of audio (to %p)\n",
len, dst);
if (nread > 0) {
if (nread & hw->info.align) {
dolog ("warning: Misaligned read %zd (requested %d), "
"alignment %d\n", nread, bufs[i].add << hwshift,
hw->info.align + 1);
}
read_samples += nread >> hwshift;
hw->conv (hw->conv_buf + bufs[i].add, p, nread >> hwshift);
}
if (bufs[i].len - nread) {
if (nread == -1) {
switch (errno) {
case EINTR:
case EAGAIN:
break;
default:
oss_logerr (
errno,
"Failed to read %d bytes of audio (to %p)\n",
bufs[i].len, p
);
break;
}
}
break;
}
}
pos += nread;
len -= nread;
}
return pos;
hw->wpos = (hw->wpos + read_samples) % hw->samples;
return read_samples;
}
static void oss_enable_in(HWVoiceIn *hw, bool enable)
static int oss_read (SWVoiceIn *sw, void *buf, int size)
{
return audio_pcm_sw_read (sw, buf, size);
}
static int oss_ctl_in (HWVoiceIn *hw, int cmd, ...)
{
OSSVoiceIn *oss = (OSSVoiceIn *) hw;
AudiodevOssPerDirectionOptions *opdo = oss->dev->u.oss.out;
if (enable) {
hw->poll_mode = opdo->try_poll;
switch (cmd) {
case VOICE_ENABLE:
{
va_list ap;
int poll_mode;
if (hw->poll_mode) {
oss_poll_in(hw);
va_start (ap, cmd);
poll_mode = va_arg (ap, int);
va_end (ap);
if (poll_mode) {
oss_poll_in (hw);
poll_mode = 0;
}
hw->poll_mode = poll_mode;
}
} else {
break;
case VOICE_DISABLE:
if (hw->poll_mode) {
qemu_set_fd_handler (oss->fd, NULL, NULL, NULL);
hw->poll_mode = 0;
qemu_set_fd_handler (oss->fd, NULL, NULL, NULL);
}
break;
}
return 0;
}
static void oss_init_per_direction(AudiodevOssPerDirectionOptions *opdo)
static OSSConf glob_conf = {
.try_mmap = 0,
.nfrags = 4,
.fragsize = 4096,
.devpath_out = "/dev/dsp",
.devpath_in = "/dev/dsp",
.exclusive = 0,
.policy = 5
};
static void *oss_audio_init (void)
{
if (!opdo->has_try_poll) {
opdo->try_poll = true;
opdo->has_try_poll = true;
}
}
OSSConf *conf = g_malloc(sizeof(OSSConf));
*conf = glob_conf;
static void *oss_audio_init(Audiodev *dev)
{
AudiodevOssOptions *oopts;
assert(dev->driver == AUDIODEV_DRIVER_OSS);
oopts = &dev->u.oss;
oss_init_per_direction(oopts->in);
oss_init_per_direction(oopts->out);
if (access(oopts->in->has_dev ? oopts->in->dev : "/dev/dsp",
R_OK | W_OK) < 0 ||
access(oopts->out->has_dev ? oopts->out->dev : "/dev/dsp",
R_OK | W_OK) < 0) {
if (access(conf->devpath_in, R_OK | W_OK) < 0 ||
access(conf->devpath_out, R_OK | W_OK) < 0) {
g_free(conf);
return NULL;
}
return dev;
return conf;
}
static void oss_audio_fini (void *opaque)
{
g_free(opaque);
}
static struct audio_option oss_options[] = {
{
.name = "FRAGSIZE",
.tag = AUD_OPT_INT,
.valp = &glob_conf.fragsize,
.descr = "Fragment size in bytes"
},
{
.name = "NFRAGS",
.tag = AUD_OPT_INT,
.valp = &glob_conf.nfrags,
.descr = "Number of fragments"
},
{
.name = "MMAP",
.tag = AUD_OPT_BOOL,
.valp = &glob_conf.try_mmap,
.descr = "Try using memory mapped access"
},
{
.name = "DAC_DEV",
.tag = AUD_OPT_STR,
.valp = &glob_conf.devpath_out,
.descr = "Path to DAC device"
},
{
.name = "ADC_DEV",
.tag = AUD_OPT_STR,
.valp = &glob_conf.devpath_in,
.descr = "Path to ADC device"
},
{
.name = "EXCLUSIVE",
.tag = AUD_OPT_BOOL,
.valp = &glob_conf.exclusive,
.descr = "Open device in exclusive mode (vmix won't work)"
},
#ifdef USE_DSP_POLICY
{
.name = "POLICY",
.tag = AUD_OPT_INT,
.valp = &glob_conf.policy,
.descr = "Set the timing policy of the device, -1 to use fragment mode",
},
#endif
{ /* End of list */ }
};
static struct audio_pcm_ops oss_pcm_ops = {
.init_out = oss_init_out,
.fini_out = oss_fini_out,
.run_out = oss_run_out,
.write = oss_write,
.run_buffer_out = oss_run_buffer_out,
.get_buffer_out = oss_get_buffer_out,
.put_buffer_out = oss_put_buffer_out,
.enable_out = oss_enable_out,
.ctl_out = oss_ctl_out,
.init_in = oss_init_in,
.fini_in = oss_fini_in,
.run_in = oss_run_in,
.read = oss_read,
.enable_in = oss_enable_in
.ctl_in = oss_ctl_in
};
static struct audio_driver oss_audio_driver = {
.name = "oss",
.descr = "OSS http://www.opensound.com",
.options = oss_options,
.init = oss_audio_init,
.fini = oss_audio_fini,
.pcm_ops = &oss_pcm_ops,
+552 -485
View File
File diff suppressed because it is too large. Load diff
+1 -1
View File
@@ -28,7 +28,7 @@
* Return number of samples processed.
*/
void NAME (void *opaque, struct st_sample *ibuf, struct st_sample *obuf,
size_t *isamp, size_t *osamp)
int *isamp, int *osamp)
{
struct rate *rate = opaque;
struct st_sample *istart, *iend;
+239 -95
View File
@@ -21,11 +21,10 @@
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include <SDL.h>
#include <SDL_thread.h>
#include "qemu/module.h"
#include "qemu-common.h"
#include "audio.h"
#ifndef _WIN32
@@ -39,15 +38,31 @@
#define AUDIO_CAP "sdl"
#include "audio_int.h"
#define USE_SEMAPHORE (SDL_MAJOR_VERSION < 2)
typedef struct SDLVoiceOut {
HWVoiceOut hw;
int live;
#if USE_SEMAPHORE
int rpos;
#endif
int decr;
} SDLVoiceOut;
static struct {
int nb_samples;
} conf = {
.nb_samples = 1024
};
static struct SDLAudioState {
int exit;
#if USE_SEMAPHORE
SDL_mutex *mutex;
SDL_sem *sem;
#endif
int initialized;
bool driver_created;
Audiodev *dev;
} glob_sdl;
typedef struct SDLAudioState SDLAudioState;
@@ -62,29 +77,81 @@ static void GCC_FMT_ATTR (1, 2) sdl_logerr (const char *fmt, ...)
AUD_log (AUDIO_CAP, "Reason: %s\n", SDL_GetError ());
}
static int aud_to_sdlfmt (AudioFormat fmt)
static int sdl_lock (SDLAudioState *s, const char *forfn)
{
#if USE_SEMAPHORE
if (SDL_LockMutex (s->mutex)) {
sdl_logerr ("SDL_LockMutex for %s failed\n", forfn);
return -1;
}
#else
SDL_LockAudio();
#endif
return 0;
}
static int sdl_unlock (SDLAudioState *s, const char *forfn)
{
#if USE_SEMAPHORE
if (SDL_UnlockMutex (s->mutex)) {
sdl_logerr ("SDL_UnlockMutex for %s failed\n", forfn);
return -1;
}
#else
SDL_UnlockAudio();
#endif
return 0;
}
static int sdl_post (SDLAudioState *s, const char *forfn)
{
#if USE_SEMAPHORE
if (SDL_SemPost (s->sem)) {
sdl_logerr ("SDL_SemPost for %s failed\n", forfn);
return -1;
}
#endif
return 0;
}
#if USE_SEMAPHORE
static int sdl_wait (SDLAudioState *s, const char *forfn)
{
if (SDL_SemWait (s->sem)) {
sdl_logerr ("SDL_SemWait for %s failed\n", forfn);
return -1;
}
return 0;
}
#endif
static int sdl_unlock_and_post (SDLAudioState *s, const char *forfn)
{
if (sdl_unlock (s, forfn)) {
return -1;
}
return sdl_post (s, forfn);
}
static int aud_to_sdlfmt (audfmt_e fmt)
{
switch (fmt) {
case AUDIO_FORMAT_S8:
case AUD_FMT_S8:
return AUDIO_S8;
case AUDIO_FORMAT_U8:
case AUD_FMT_U8:
return AUDIO_U8;
case AUDIO_FORMAT_S16:
case AUD_FMT_S16:
return AUDIO_S16LSB;
case AUDIO_FORMAT_U16:
case AUD_FMT_U16:
return AUDIO_U16LSB;
case AUDIO_FORMAT_S32:
return AUDIO_S32LSB;
/* no unsigned 32-bit support in SDL */
case AUDIO_FORMAT_F32:
return AUDIO_F32LSB;
default:
dolog ("Internal logic error: Bad audio format %d\n", fmt);
#ifdef DEBUG_AUDIO
@@ -94,57 +161,37 @@ static int aud_to_sdlfmt (AudioFormat fmt)
}
}
static int sdl_to_audfmt(int sdlfmt, AudioFormat *fmt, int *endianness)
static int sdl_to_audfmt(int sdlfmt, audfmt_e *fmt, int *endianness)
{
switch (sdlfmt) {
case AUDIO_S8:
*endianness = 0;
*fmt = AUDIO_FORMAT_S8;
*fmt = AUD_FMT_S8;
break;
case AUDIO_U8:
*endianness = 0;
*fmt = AUDIO_FORMAT_U8;
*fmt = AUD_FMT_U8;
break;
case AUDIO_S16LSB:
*endianness = 0;
*fmt = AUDIO_FORMAT_S16;
*fmt = AUD_FMT_S16;
break;
case AUDIO_U16LSB:
*endianness = 0;
*fmt = AUDIO_FORMAT_U16;
*fmt = AUD_FMT_U16;
break;
case AUDIO_S16MSB:
*endianness = 1;
*fmt = AUDIO_FORMAT_S16;
*fmt = AUD_FMT_S16;
break;
case AUDIO_U16MSB:
*endianness = 1;
*fmt = AUDIO_FORMAT_U16;
break;
case AUDIO_S32LSB:
*endianness = 0;
*fmt = AUDIO_FORMAT_S32;
break;
case AUDIO_S32MSB:
*endianness = 1;
*fmt = AUDIO_FORMAT_S32;
break;
case AUDIO_F32LSB:
*endianness = 0;
*fmt = AUDIO_FORMAT_F32;
break;
case AUDIO_F32MSB:
*endianness = 1;
*fmt = AUDIO_FORMAT_F32;
*fmt = AUD_FMT_U16;
break;
default:
@@ -196,9 +243,9 @@ static int sdl_open (SDL_AudioSpec *req, SDL_AudioSpec *obt)
static void sdl_close (SDLAudioState *s)
{
if (s->initialized) {
SDL_LockAudio();
sdl_lock (s, "sdl_close");
s->exit = 1;
SDL_UnlockAudio();
sdl_unlock_and_post (s, "sdl_close");
SDL_PauseAudio (1);
SDL_CloseAudio ();
s->initialized = 0;
@@ -210,59 +257,119 @@ static void sdl_callback (void *opaque, Uint8 *buf, int len)
SDLVoiceOut *sdl = opaque;
SDLAudioState *s = &glob_sdl;
HWVoiceOut *hw = &sdl->hw;
int samples = len >> hw->info.shift;
if (s->exit) {
return;
}
/* dolog ("in callback samples=%zu live=%zu\n", samples, sdl->live); */
while (samples) {
int to_mix, decr;
while (hw->pending_emul && len) {
size_t write_len;
ssize_t start = ((ssize_t) hw->pos_emul) - hw->pending_emul;
if (start < 0) {
start += hw->size_emul;
/* dolog ("in callback samples=%d\n", samples); */
#if USE_SEMAPHORE
sdl_wait (s, "sdl_callback");
if (s->exit) {
return;
}
assert(start >= 0 && start < hw->size_emul);
write_len = MIN(MIN(hw->pending_emul, len),
hw->size_emul - start);
if (sdl_lock (s, "sdl_callback")) {
return;
}
memcpy(buf, hw->buf_emul + start, write_len);
hw->pending_emul -= write_len;
len -= write_len;
buf += write_len;
if (audio_bug(__func__, sdl->live < 0 || sdl->live > hw->samples)) {
dolog ("sdl->live=%d hw->samples=%d\n",
sdl->live, hw->samples);
return;
}
if (!sdl->live) {
goto again;
}
#else
if (s->exit || !sdl->live) {
break;
}
#endif
/* dolog ("in callback live=%d\n", live); */
to_mix = audio_MIN (samples, sdl->live);
decr = to_mix;
while (to_mix) {
int chunk = audio_MIN (to_mix, hw->samples - hw->rpos);
struct st_sample *src = hw->mix_buf + hw->rpos;
/* dolog ("in callback to_mix %d, chunk %d\n", to_mix, chunk); */
hw->clip (buf, src, chunk);
#if USE_SEMAPHORE
sdl->rpos = (sdl->rpos + chunk) % hw->samples;
#else
hw->rpos = (hw->rpos + chunk) % hw->samples;
#endif
to_mix -= chunk;
buf += chunk << hw->info.shift;
}
samples -= decr;
sdl->live -= decr;
sdl->decr += decr;
#if USE_SEMAPHORE
again:
if (sdl_unlock (s, "sdl_callback")) {
return;
}
#endif
}
/* dolog ("done len=%d\n", len); */
/* clear remaining buffer that we couldn't fill with data */
if (len) {
memset(buf, 0, len);
#if (SDL_MAJOR_VERSION >= 2)
/* SDL2 does not clear the remaining buffer for us, so do it on our own */
if (samples) {
memset(buf, 0, samples << hw->info.shift);
}
#endif
}
#define SDL_WRAPPER_FUNC(name, ret_type, args_decl, args, fail, unlock) \
static ret_type glue(sdl_, name)args_decl \
{ \
ret_type ret; \
\
SDL_LockAudio(); \
\
ret = glue(audio_generic_, name)args; \
\
SDL_UnlockAudio(); \
return ret; \
static int sdl_write_out (SWVoiceOut *sw, void *buf, int len)
{
return audio_pcm_sw_write (sw, buf, len);
}
static int sdl_run_out (HWVoiceOut *hw, int live)
{
int decr;
SDLVoiceOut *sdl = (SDLVoiceOut *) hw;
SDLAudioState *s = &glob_sdl;
if (sdl_lock (s, "sdl_run_out")) {
return 0;
}
SDL_WRAPPER_FUNC(get_buffer_out, void *, (HWVoiceOut *hw, size_t *size),
(hw, size), *size = 0, sdl_unlock)
SDL_WRAPPER_FUNC(put_buffer_out, size_t,
(HWVoiceOut *hw, void *buf, size_t size), (hw, buf, size),
/*nothing*/, sdl_unlock_and_post)
SDL_WRAPPER_FUNC(write, size_t,
(HWVoiceOut *hw, void *buf, size_t size), (hw, buf, size),
/*nothing*/, sdl_unlock_and_post)
if (sdl->decr > live) {
ldebug ("sdl->decr %d live %d sdl->live %d\n",
sdl->decr,
live,
sdl->live);
}
#undef SDL_WRAPPER_FUNC
decr = audio_MIN (sdl->decr, live);
sdl->decr -= decr;
#if USE_SEMAPHORE
sdl->live = live - decr;
hw->rpos = sdl->rpos;
#else
sdl->live = live;
#endif
if (sdl->live > 0) {
sdl_unlock_and_post (s, "sdl_run_out");
}
else {
sdl_unlock (s, "sdl_run_out");
}
return decr;
}
static void sdl_fini_out (HWVoiceOut *hw)
{
@@ -279,13 +386,13 @@ static int sdl_init_out(HWVoiceOut *hw, struct audsettings *as,
SDL_AudioSpec req, obt;
int endianness;
int err;
AudioFormat effective_fmt;
audfmt_e effective_fmt;
struct audsettings obt_as;
req.freq = as->freq;
req.format = aud_to_sdlfmt (as->fmt);
req.channels = as->nchannels;
req.samples = audio_buffer_samples(s->dev->u.sdl.out, as, 11610);
req.samples = conf.nb_samples;
req.callback = sdl_callback;
req.userdata = sdl;
@@ -313,12 +420,23 @@ static int sdl_init_out(HWVoiceOut *hw, struct audsettings *as,
return 0;
}
static void sdl_enable_out(HWVoiceOut *hw, bool enable)
static int sdl_ctl_out (HWVoiceOut *hw, int cmd, ...)
{
SDL_PauseAudio(!enable);
(void) hw;
switch (cmd) {
case VOICE_ENABLE:
SDL_PauseAudio (0);
break;
case VOICE_DISABLE:
SDL_PauseAudio (1);
break;
}
return 0;
}
static void *sdl_audio_init(Audiodev *dev)
static void *sdl_audio_init (void)
{
SDLAudioState *s = &glob_sdl;
if (s->driver_created) {
@@ -331,8 +449,24 @@ static void *sdl_audio_init(Audiodev *dev)
return NULL;
}
#if USE_SEMAPHORE
s->mutex = SDL_CreateMutex ();
if (!s->mutex) {
sdl_logerr ("Failed to create SDL mutex\n");
SDL_QuitSubSystem (SDL_INIT_AUDIO);
return NULL;
}
s->sem = SDL_CreateSemaphore (0);
if (!s->sem) {
sdl_logerr ("Failed to create SDL semaphore\n");
SDL_DestroyMutex (s->mutex);
SDL_QuitSubSystem (SDL_INIT_AUDIO);
return NULL;
}
#endif
s->driver_created = true;
s->dev = dev;
return s;
}
@@ -340,26 +474,36 @@ static void sdl_audio_fini (void *opaque)
{
SDLAudioState *s = opaque;
sdl_close (s);
#if USE_SEMAPHORE
SDL_DestroySemaphore (s->sem);
SDL_DestroyMutex (s->mutex);
#endif
SDL_QuitSubSystem (SDL_INIT_AUDIO);
s->driver_created = false;
s->dev = NULL;
}
static struct audio_option sdl_options[] = {
{
.name = "SAMPLES",
.tag = AUD_OPT_INT,
.valp = &conf.nb_samples,
.descr = "Size of SDL buffer in samples"
},
{ /* End of list */ }
};
static struct audio_pcm_ops sdl_pcm_ops = {
.init_out = sdl_init_out,
.fini_out = sdl_fini_out,
/* wrapper for audio_generic_write */
.write = sdl_write,
/* wrapper for audio_generic_get_buffer_out */
.get_buffer_out = sdl_get_buffer_out,
/* wrapper for audio_generic_put_buffer_out */
.put_buffer_out = sdl_put_buffer_out,
.enable_out = sdl_enable_out,
.run_out = sdl_run_out,
.write = sdl_write_out,
.ctl_out = sdl_ctl_out,
};
static struct audio_driver sdl_audio_driver = {
.name = "sdl",
.descr = "SDL http://www.libsdl.org",
.options = sdl_options,
.init = sdl_audio_init,
.fini = sdl_audio_fini,
.pcm_ops = &sdl_pcm_ops,
+188 -91
View File
@@ -18,8 +18,8 @@
*/
#include "qemu/osdep.h"
#include "hw/hw.h"
#include "qemu/host-utils.h"
#include "qemu/module.h"
#include "qemu/error-report.h"
#include "qemu/timer.h"
#include "ui/qemu-spice.h"
@@ -40,21 +40,27 @@
#define LINE_IN_SAMPLES (256 * 4)
#endif
typedef struct SpiceRateCtl {
int64_t start_ticks;
int64_t bytes_sent;
} SpiceRateCtl;
typedef struct SpiceVoiceOut {
HWVoiceOut hw;
SpicePlaybackInstance sin;
RateCtl rate;
SpiceRateCtl rate;
int active;
uint32_t *frame;
uint32_t fpos;
uint32_t *fpos;
uint32_t fsize;
} SpiceVoiceOut;
typedef struct SpiceVoiceIn {
HWVoiceIn hw;
SpiceRecordInstance sin;
RateCtl rate;
SpiceRateCtl rate;
int active;
uint32_t samples[LINE_IN_SAMPLES];
} SpiceVoiceIn;
static const SpicePlaybackInterface playback_sif = {
@@ -71,7 +77,7 @@ static const SpiceRecordInterface record_sif = {
.base.minor_version = SPICE_INTERFACE_RECORD_MINOR,
};
static void *spice_audio_init(Audiodev *dev)
static void *spice_audio_init (void)
{
if (!using_spice) {
return NULL;
@@ -84,6 +90,32 @@ static void spice_audio_fini (void *opaque)
/* nothing */
}
static void rate_start (SpiceRateCtl *rate)
{
memset (rate, 0, sizeof (*rate));
rate->start_ticks = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
}
static int rate_get_samples (struct audio_pcm_info *info, SpiceRateCtl *rate)
{
int64_t now;
int64_t ticks;
int64_t bytes;
int64_t samples;
now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
ticks = now - rate->start_ticks;
bytes = muldiv64(ticks, info->bytes_per_second, NANOSECONDS_PER_SECOND);
samples = (bytes - rate->bytes_sent) >> info->shift;
if (samples < 0 || samples > 65536) {
error_report("Resetting rate control (%" PRId64 " samples)", samples);
rate_start(rate);
samples = 0;
}
rate->bytes_sent += samples << info->shift;
return samples;
}
/* playback */
static int line_out_init(HWVoiceOut *hw, struct audsettings *as,
@@ -98,7 +130,7 @@ static int line_out_init(HWVoiceOut *hw, struct audsettings *as,
settings.freq = SPICE_INTERFACE_PLAYBACK_FREQ;
#endif
settings.nchannels = SPICE_INTERFACE_PLAYBACK_CHAN;
settings.fmt = AUDIO_FORMAT_S16;
settings.fmt = AUD_FMT_S16;
settings.endianness = AUDIO_HOST_ENDIANNESS;
audio_pcm_init_info (&hw->info, &settings);
@@ -120,78 +152,98 @@ static void line_out_fini (HWVoiceOut *hw)
spice_server_remove_interface (&out->sin.base);
}
static void *line_out_get_buffer(HWVoiceOut *hw, size_t *size)
static int line_out_run (HWVoiceOut *hw, int live)
{
SpiceVoiceOut *out = container_of(hw, SpiceVoiceOut, hw);
SpiceVoiceOut *out = container_of (hw, SpiceVoiceOut, hw);
int rpos, decr;
int samples;
if (!out->frame) {
spice_server_playback_get_buffer(&out->sin, &out->frame, &out->fsize);
out->fpos = 0;
if (!live) {
return 0;
}
if (out->frame) {
*size = audio_rate_get_bytes(
&hw->info, &out->rate,
(out->fsize - out->fpos) * hw->info.bytes_per_frame);
} else {
audio_rate_start(&out->rate);
decr = rate_get_samples (&hw->info, &out->rate);
decr = audio_MIN (live, decr);
samples = decr;
rpos = hw->rpos;
while (samples) {
int left_till_end_samples = hw->samples - rpos;
int len = audio_MIN (samples, left_till_end_samples);
if (!out->frame) {
spice_server_playback_get_buffer (&out->sin, &out->frame, &out->fsize);
out->fpos = out->frame;
}
if (out->frame) {
len = audio_MIN (len, out->fsize);
hw->clip (out->fpos, hw->mix_buf + rpos, len);
out->fsize -= len;
out->fpos += len;
if (out->fsize == 0) {
spice_server_playback_put_samples (&out->sin, out->frame);
out->frame = out->fpos = NULL;
}
}
rpos = (rpos + len) % hw->samples;
samples -= len;
}
return out->frame + out->fpos;
hw->rpos = rpos;
return decr;
}
static size_t line_out_put_buffer(HWVoiceOut *hw, void *buf, size_t size)
static int line_out_write (SWVoiceOut *sw, void *buf, int len)
{
SpiceVoiceOut *out = container_of(hw, SpiceVoiceOut, hw);
assert(buf == out->frame + out->fpos && out->fpos <= out->fsize);
out->fpos += size >> 2;
if (out->fpos == out->fsize) { /* buffer full */
spice_server_playback_put_samples(&out->sin, out->frame);
out->frame = NULL;
}
return size;
return audio_pcm_sw_write (sw, buf, len);
}
static void line_out_enable(HWVoiceOut *hw, bool enable)
static int line_out_ctl (HWVoiceOut *hw, int cmd, ...)
{
SpiceVoiceOut *out = container_of (hw, SpiceVoiceOut, hw);
if (enable) {
switch (cmd) {
case VOICE_ENABLE:
if (out->active) {
return;
break;
}
out->active = 1;
audio_rate_start(&out->rate);
rate_start (&out->rate);
spice_server_playback_start (&out->sin);
} else {
break;
case VOICE_DISABLE:
if (!out->active) {
return;
break;
}
out->active = 0;
if (out->frame) {
memset(out->frame + out->fpos, 0, (out->fsize - out->fpos) << 2);
memset (out->fpos, 0, out->fsize << 2);
spice_server_playback_put_samples (&out->sin, out->frame);
out->frame = NULL;
out->frame = out->fpos = NULL;
}
spice_server_playback_stop (&out->sin);
}
}
break;
case VOICE_VOLUME:
{
#if ((SPICE_INTERFACE_PLAYBACK_MAJOR >= 1) && (SPICE_INTERFACE_PLAYBACK_MINOR >= 2))
static void line_out_volume(HWVoiceOut *hw, Volume *vol)
{
SpiceVoiceOut *out = container_of(hw, SpiceVoiceOut, hw);
uint16_t svol[2];
SWVoiceOut *sw;
va_list ap;
uint16_t vol[2];
assert(vol->channels == 2);
svol[0] = vol->vol[0] * 257;
svol[1] = vol->vol[1] * 257;
spice_server_playback_set_volume(&out->sin, 2, svol);
spice_server_playback_set_mute(&out->sin, vol->mute);
}
va_start (ap, cmd);
sw = va_arg (ap, SWVoiceOut *);
va_end (ap);
vol[0] = sw->vol.l / ((1ULL << 16) + 1);
vol[1] = sw->vol.r / ((1ULL << 16) + 1);
spice_server_playback_set_volume (&out->sin, 2, vol);
spice_server_playback_set_mute (&out->sin, sw->vol.mute);
#endif
break;
}
}
return 0;
}
/* record */
@@ -206,7 +258,7 @@ static int line_in_init(HWVoiceIn *hw, struct audsettings *as, void *drv_opaque)
settings.freq = SPICE_INTERFACE_RECORD_FREQ;
#endif
settings.nchannels = SPICE_INTERFACE_RECORD_CHAN;
settings.fmt = AUDIO_FORMAT_S16;
settings.fmt = AUD_FMT_S16;
settings.endianness = AUDIO_HOST_ENDIANNESS;
audio_pcm_init_info (&hw->info, &settings);
@@ -228,79 +280,121 @@ static void line_in_fini (HWVoiceIn *hw)
spice_server_remove_interface (&in->sin.base);
}
static size_t line_in_read(HWVoiceIn *hw, void *buf, size_t len)
static int line_in_run (HWVoiceIn *hw)
{
SpiceVoiceIn *in = container_of (hw, SpiceVoiceIn, hw);
uint64_t to_read = audio_rate_get_bytes(&hw->info, &in->rate, len) >> 2;
size_t ready = spice_server_record_get_samples(&in->sin, buf, to_read);
int num_samples;
int ready;
int len[2];
uint64_t delta_samp;
const uint32_t *samples;
/* XXX: do we need this? */
if (ready == 0) {
memset(buf, 0, to_read << 2);
ready = to_read;
if (!(num_samples = hw->samples - audio_pcm_hw_get_live_in (hw))) {
return 0;
}
return ready << 2;
delta_samp = rate_get_samples (&hw->info, &in->rate);
num_samples = audio_MIN (num_samples, delta_samp);
ready = spice_server_record_get_samples (&in->sin, in->samples, num_samples);
samples = in->samples;
if (ready == 0) {
static const uint32_t silence[LINE_IN_SAMPLES];
samples = silence;
ready = LINE_IN_SAMPLES;
}
num_samples = audio_MIN (ready, num_samples);
if (hw->wpos + num_samples > hw->samples) {
len[0] = hw->samples - hw->wpos;
len[1] = num_samples - len[0];
} else {
len[0] = num_samples;
len[1] = 0;
}
hw->conv (hw->conv_buf + hw->wpos, samples, len[0]);
if (len[1]) {
hw->conv (hw->conv_buf, samples + len[0], len[1]);
}
hw->wpos = (hw->wpos + num_samples) % hw->samples;
return num_samples;
}
static void line_in_enable(HWVoiceIn *hw, bool enable)
static int line_in_read (SWVoiceIn *sw, void *buf, int size)
{
return audio_pcm_sw_read (sw, buf, size);
}
static int line_in_ctl (HWVoiceIn *hw, int cmd, ...)
{
SpiceVoiceIn *in = container_of (hw, SpiceVoiceIn, hw);
if (enable) {
switch (cmd) {
case VOICE_ENABLE:
if (in->active) {
return;
break;
}
in->active = 1;
audio_rate_start(&in->rate);
rate_start (&in->rate);
spice_server_record_start (&in->sin);
} else {
break;
case VOICE_DISABLE:
if (!in->active) {
return;
break;
}
in->active = 0;
spice_server_record_stop (&in->sin);
}
}
break;
case VOICE_VOLUME:
{
#if ((SPICE_INTERFACE_RECORD_MAJOR >= 2) && (SPICE_INTERFACE_RECORD_MINOR >= 2))
static void line_in_volume(HWVoiceIn *hw, Volume *vol)
{
SpiceVoiceIn *in = container_of(hw, SpiceVoiceIn, hw);
uint16_t svol[2];
SWVoiceIn *sw;
va_list ap;
uint16_t vol[2];
assert(vol->channels == 2);
svol[0] = vol->vol[0] * 257;
svol[1] = vol->vol[1] * 257;
spice_server_record_set_volume(&in->sin, 2, svol);
spice_server_record_set_mute(&in->sin, vol->mute);
}
va_start (ap, cmd);
sw = va_arg (ap, SWVoiceIn *);
va_end (ap);
vol[0] = sw->vol.l / ((1ULL << 16) + 1);
vol[1] = sw->vol.r / ((1ULL << 16) + 1);
spice_server_record_set_volume (&in->sin, 2, vol);
spice_server_record_set_mute (&in->sin, sw->vol.mute);
#endif
break;
}
}
return 0;
}
static struct audio_option audio_options[] = {
{ /* end of list */ },
};
static struct audio_pcm_ops audio_callbacks = {
.init_out = line_out_init,
.fini_out = line_out_fini,
.write = audio_generic_write,
.get_buffer_out = line_out_get_buffer,
.put_buffer_out = line_out_put_buffer,
.enable_out = line_out_enable,
#if (SPICE_INTERFACE_PLAYBACK_MAJOR >= 1) && \
(SPICE_INTERFACE_PLAYBACK_MINOR >= 2)
.volume_out = line_out_volume,
#endif
.run_out = line_out_run,
.write = line_out_write,
.ctl_out = line_out_ctl,
.init_in = line_in_init,
.fini_in = line_in_fini,
.run_in = line_in_run,
.read = line_in_read,
.enable_in = line_in_enable,
#if ((SPICE_INTERFACE_RECORD_MAJOR >= 2) && (SPICE_INTERFACE_RECORD_MINOR >= 2))
.volume_in = line_in_volume,
#endif
.ctl_in = line_in_ctl,
};
static struct audio_driver spice_audio_driver = {
.name = "spice",
.descr = "spice audio driver",
.options = audio_options,
.init = spice_audio_init,
.fini = spice_audio_fini,
.pcm_ops = &audio_callbacks,
@@ -308,6 +402,9 @@ static struct audio_driver spice_audio_driver = {
.max_voices_in = 1,
.voice_size_out = sizeof (SpiceVoiceOut),
.voice_size_in = sizeof (SpiceVoiceIn),
#if ((SPICE_INTERFACE_PLAYBACK_MAJOR >= 1) && (SPICE_INTERFACE_PLAYBACK_MINOR >= 2))
.ctl_caps = VOICE_VOLUME_CAP
#endif
};
void qemu_spice_audio_init (void)
+2 -7
View File
@@ -1,6 +1,6 @@
# See docs/devel/tracing.txt for syntax documentation.
# alsaaudio.c
# audio/alsaaudio.c
alsa_revents(int revents) "revents = %d"
alsa_pollout(int i, int fd) "i = %d fd = %d"
alsa_set_handler(int events, int index, int fd, int err) "events=0x%x index=%d fd=%d err=%d"
@@ -12,11 +12,6 @@ alsa_resume_out(void) "Resuming suspended output stream"
alsa_resume_in(void) "Resuming suspended input stream"
alsa_no_frames(int state) "No frames available and ALSA state is %d"
# ossaudio.c
# audio/ossaudio.c
oss_version(int version) "OSS version = 0x%x"
oss_invalid_available_size(int size, int bufsize) "Invalid available size, size=%d bufsize=%d"
# audio.c
audio_timer_start(int interval) "interval %d ms"
audio_timer_stop(void) ""
audio_timer_delayed(int interval) "interval %d ms"
+119 -41
View File
@@ -21,12 +21,9 @@
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qemu/host-utils.h"
#include "qemu/module.h"
#include "qemu/timer.h"
#include "qapi/opts-visitor.h"
#include "audio.h"
#define AUDIO_CAP "wav"
@@ -35,23 +32,63 @@
typedef struct WAVVoiceOut {
HWVoiceOut hw;
FILE *f;
RateCtl rate;
int64_t old_ticks;
void *pcm_buf;
int total_samples;
} WAVVoiceOut;
static size_t wav_write_out(HWVoiceOut *hw, void *buf, size_t len)
typedef struct {
struct audsettings settings;
const char *wav_path;
} WAVConf;
static int wav_run_out (HWVoiceOut *hw, int live)
{
WAVVoiceOut *wav = (WAVVoiceOut *) hw;
int64_t bytes = audio_rate_get_bytes(&hw->info, &wav->rate, len);
assert(bytes % hw->info.bytes_per_frame == 0);
int rpos, decr, samples;
uint8_t *dst;
struct st_sample *src;
int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
int64_t ticks = now - wav->old_ticks;
int64_t bytes =
muldiv64(ticks, hw->info.bytes_per_second, NANOSECONDS_PER_SECOND);
if (bytes && fwrite(buf, bytes, 1, wav->f) != 1) {
dolog("wav_write_out: fwrite of %" PRId64 " bytes failed\nReason: %s\n",
bytes, strerror(errno));
if (bytes > INT_MAX) {
samples = INT_MAX >> hw->info.shift;
}
else {
samples = bytes >> hw->info.shift;
}
wav->total_samples += bytes / hw->info.bytes_per_frame;
return bytes;
wav->old_ticks = now;
decr = audio_MIN (live, samples);
samples = decr;
rpos = hw->rpos;
while (samples) {
int left_till_end_samples = hw->samples - rpos;
int convert_samples = audio_MIN (samples, left_till_end_samples);
src = hw->mix_buf + rpos;
dst = advance (wav->pcm_buf, rpos << hw->info.shift);
hw->clip (dst, src, convert_samples);
if (fwrite (dst, convert_samples << hw->info.shift, 1, wav->f) != 1) {
dolog ("wav_run_out: fwrite of %d bytes failed\nReaons: %s\n",
convert_samples << hw->info.shift, strerror (errno));
}
rpos = (rpos + convert_samples) % hw->samples;
samples -= convert_samples;
wav->total_samples += convert_samples;
}
hw->rpos = rpos;
return decr;
}
static int wav_write_out (SWVoiceOut *sw, void *buf, int len)
{
return audio_pcm_sw_write (sw, buf, len);
}
/* VICE code: Store number as little endian. */
@@ -75,30 +112,25 @@ static int wav_init_out(HWVoiceOut *hw, struct audsettings *as,
0x02, 0x00, 0x44, 0xac, 0x00, 0x00, 0x10, 0xb1, 0x02, 0x00, 0x04,
0x00, 0x10, 0x00, 0x64, 0x61, 0x74, 0x61, 0x00, 0x00, 0x00, 0x00
};
Audiodev *dev = drv_opaque;
AudiodevWavOptions *wopts = &dev->u.wav;
struct audsettings wav_as = audiodev_to_audsettings(dev->u.wav.out);
const char *wav_path = wopts->has_path ? wopts->path : "qemu.wav";
WAVConf *conf = drv_opaque;
struct audsettings wav_as = conf->settings;
stereo = wav_as.nchannels == 2;
switch (wav_as.fmt) {
case AUDIO_FORMAT_S8:
case AUDIO_FORMAT_U8:
case AUD_FMT_S8:
case AUD_FMT_U8:
bits16 = 0;
break;
case AUDIO_FORMAT_S16:
case AUDIO_FORMAT_U16:
case AUD_FMT_S16:
case AUD_FMT_U16:
bits16 = 1;
break;
case AUDIO_FORMAT_S32:
case AUDIO_FORMAT_U32:
case AUD_FMT_S32:
case AUD_FMT_U32:
dolog ("WAVE files can not handle 32bit formats\n");
return -1;
default:
abort();
}
hdr[34] = bits16 ? 0x10 : 0x08;
@@ -107,15 +139,24 @@ static int wav_init_out(HWVoiceOut *hw, struct audsettings *as,
audio_pcm_init_info (&hw->info, &wav_as);
hw->samples = 1024;
wav->pcm_buf = audio_calloc(__func__, hw->samples, 1 << hw->info.shift);
if (!wav->pcm_buf) {
dolog ("Could not allocate buffer (%d bytes)\n",
hw->samples << hw->info.shift);
return -1;
}
le_store (hdr + 22, hw->info.nchannels, 2);
le_store (hdr + 24, hw->info.freq, 4);
le_store (hdr + 28, hw->info.freq << (bits16 + stereo), 4);
le_store (hdr + 32, 1 << (bits16 + stereo), 2);
wav->f = fopen(wav_path, "wb");
wav->f = fopen (conf->wav_path, "wb");
if (!wav->f) {
dolog ("Failed to open wave file `%s'\nReason: %s\n",
wav_path, strerror(errno));
conf->wav_path, strerror (errno));
g_free (wav->pcm_buf);
wav->pcm_buf = NULL;
return -1;
}
@@ -124,8 +165,6 @@ static int wav_init_out(HWVoiceOut *hw, struct audsettings *as,
strerror(errno));
return -1;
}
audio_rate_start(&wav->rate);
return 0;
}
@@ -134,7 +173,7 @@ static void wav_fini_out (HWVoiceOut *hw)
WAVVoiceOut *wav = (WAVVoiceOut *) hw;
uint8_t rlen[4];
uint8_t dlen[4];
uint32_t datalen = wav->total_samples * hw->info.bytes_per_frame;
uint32_t datalen = wav->total_samples << hw->info.shift;
uint32_t rifflen = datalen + 36;
if (!wav->f) {
@@ -171,39 +210,78 @@ static void wav_fini_out (HWVoiceOut *hw)
wav->f, strerror (errno));
}
wav->f = NULL;
g_free (wav->pcm_buf);
wav->pcm_buf = NULL;
}
static void wav_enable_out(HWVoiceOut *hw, bool enable)
static int wav_ctl_out (HWVoiceOut *hw, int cmd, ...)
{
WAVVoiceOut *wav = (WAVVoiceOut *) hw;
if (enable) {
audio_rate_start(&wav->rate);
}
(void) hw;
(void) cmd;
return 0;
}
static void *wav_audio_init(Audiodev *dev)
static WAVConf glob_conf = {
.settings.freq = 44100,
.settings.nchannels = 2,
.settings.fmt = AUD_FMT_S16,
.wav_path = "qemu.wav"
};
static void *wav_audio_init (void)
{
assert(dev->driver == AUDIODEV_DRIVER_WAV);
return dev;
WAVConf *conf = g_malloc(sizeof(WAVConf));
*conf = glob_conf;
return conf;
}
static void wav_audio_fini (void *opaque)
{
ldebug ("wav_fini");
g_free(opaque);
}
static struct audio_option wav_options[] = {
{
.name = "FREQUENCY",
.tag = AUD_OPT_INT,
.valp = &glob_conf.settings.freq,
.descr = "Frequency"
},
{
.name = "FORMAT",
.tag = AUD_OPT_FMT,
.valp = &glob_conf.settings.fmt,
.descr = "Format"
},
{
.name = "DAC_FIXED_CHANNELS",
.tag = AUD_OPT_INT,
.valp = &glob_conf.settings.nchannels,
.descr = "Number of channels (1 - mono, 2 - stereo)"
},
{
.name = "PATH",
.tag = AUD_OPT_STR,
.valp = &glob_conf.wav_path,
.descr = "Path to wave file"
},
{ /* End of list */ }
};
static struct audio_pcm_ops wav_pcm_ops = {
.init_out = wav_init_out,
.fini_out = wav_fini_out,
.run_out = wav_run_out,
.write = wav_write_out,
.run_buffer_out = audio_generic_run_buffer_out,
.enable_out = wav_enable_out,
.ctl_out = wav_ctl_out,
};
static struct audio_driver wav_audio_driver = {
.name = "wav",
.descr = "WAV renderer http://wikipedia.org/wiki/WAV",
.options = wav_options,
.init = wav_audio_init,
.fini = wav_audio_fini,
.pcm_ops = &wav_pcm_ops,
+27 -21
View File
@@ -1,4 +1,5 @@
#include "qemu/osdep.h"
#include "hw/hw.h"
#include "monitor/monitor.h"
#include "qapi/error.h"
#include "qemu/error-report.h"
@@ -37,29 +38,30 @@ static void wav_destroy (void *opaque)
uint8_t dlen[4];
uint32_t datalen = wav->bytes;
uint32_t rifflen = datalen + 36;
Monitor *mon = cur_mon;
if (wav->f) {
le_store (rlen, rifflen, 4);
le_store (dlen, datalen, 4);
if (fseek (wav->f, 4, SEEK_SET)) {
error_report("wav_destroy: rlen fseek failed: %s",
strerror(errno));
monitor_printf (mon, "wav_destroy: rlen fseek failed\nReason: %s\n",
strerror (errno));
goto doclose;
}
if (fwrite (rlen, 4, 1, wav->f) != 1) {
error_report("wav_destroy: rlen fwrite failed: %s",
strerror(errno));
monitor_printf (mon, "wav_destroy: rlen fwrite failed\nReason %s\n",
strerror (errno));
goto doclose;
}
if (fseek (wav->f, 32, SEEK_CUR)) {
error_report("wav_destroy: dlen fseek failed: %s",
strerror(errno));
monitor_printf (mon, "wav_destroy: dlen fseek failed\nReason %s\n",
strerror (errno));
goto doclose;
}
if (fwrite (dlen, 1, 4, wav->f) != 4) {
error_report("wav_destroy: dlen fwrite failed: %s",
strerror(errno));
monitor_printf (mon, "wav_destroy: dlen fwrite failed\nReason %s\n",
strerror (errno));
goto doclose;
}
doclose:
@@ -76,7 +78,8 @@ static void wav_capture (void *opaque, void *buf, int size)
WAVState *wav = opaque;
if (fwrite (buf, size, 1, wav->f) != 1) {
error_report("wav_capture: fwrite error: %s", strerror(errno));
monitor_printf (cur_mon, "wav_capture: fwrite error\nReason: %s",
strerror (errno));
}
wav->bytes += size;
}
@@ -104,9 +107,10 @@ static struct capture_ops wav_capture_ops = {
.info = wav_capture_info
};
int wav_start_capture(AudioState *state, CaptureState *s, const char *path,
int freq, int bits, int nchannels)
int wav_start_capture (CaptureState *s, const char *path, int freq,
int bits, int nchannels)
{
Monitor *mon = cur_mon;
WAVState *wav;
uint8_t hdr[] = {
0x52, 0x49, 0x46, 0x46, 0x00, 0x00, 0x00, 0x00, 0x57, 0x41, 0x56,
@@ -120,13 +124,13 @@ int wav_start_capture(AudioState *state, CaptureState *s, const char *path,
CaptureVoiceOut *cap;
if (bits != 8 && bits != 16) {
error_report("incorrect bit count %d, must be 8 or 16", bits);
monitor_printf (mon, "incorrect bit count %d, must be 8 or 16\n", bits);
return -1;
}
if (nchannels != 1 && nchannels != 2) {
error_report("incorrect channel count %d, must be 1 or 2",
nchannels);
monitor_printf (mon, "incorrect channel count %d, must be 1 or 2\n",
nchannels);
return -1;
}
@@ -135,7 +139,7 @@ int wav_start_capture(AudioState *state, CaptureState *s, const char *path,
as.freq = freq;
as.nchannels = 1 << stereo;
as.fmt = bits16 ? AUDIO_FORMAT_S16 : AUDIO_FORMAT_U8;
as.fmt = bits16 ? AUD_FMT_S16 : AUD_FMT_U8;
as.endianness = 0;
ops.notify = wav_notify;
@@ -154,8 +158,8 @@ int wav_start_capture(AudioState *state, CaptureState *s, const char *path,
wav->f = fopen (path, "wb");
if (!wav->f) {
error_report("Failed to open wave file `%s': %s",
path, strerror(errno));
monitor_printf (mon, "Failed to open wave file `%s'\nReason: %s\n",
path, strerror (errno));
g_free (wav);
return -1;
}
@@ -166,13 +170,14 @@ int wav_start_capture(AudioState *state, CaptureState *s, const char *path,
wav->freq = freq;
if (fwrite (hdr, sizeof (hdr), 1, wav->f) != 1) {
error_report("Failed to write header: %s", strerror(errno));
monitor_printf (mon, "Failed to write header\nReason: %s\n",
strerror (errno));
goto error_free;
}
cap = AUD_add_capture(state, &as, &ops, wav);
cap = AUD_add_capture (&as, &ops, wav);
if (!cap) {
error_report("Failed to add audio capture");
monitor_printf (mon, "Failed to add audio capture\n");
goto error_free;
}
@@ -184,7 +189,8 @@ int wav_start_capture(AudioState *state, CaptureState *s, const char *path,
error_free:
g_free (wav->path);
if (fclose (wav->f)) {
error_report("Failed to close wave file: %s", strerror(errno));
monitor_printf (mon, "Failed to close wave file\nReason: %s\n",
strerror (errno));
}
g_free (wav);
return -1;
-7
View File
@@ -1,7 +0,0 @@
authz-obj-y += base.o
authz-obj-y += simple.o
authz-obj-y += list.o
authz-obj-y += listfile.o
authz-obj-$(CONFIG_AUTH_PAM) += pamacct.o
pamacct.o-libs = -lpam
-83
View File
@@ -1,83 +0,0 @@
/*
* QEMU authorization framework base class
*
* Copyright (c) 2018 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "authz/base.h"
#include "qemu/module.h"
#include "trace.h"
bool qauthz_is_allowed(QAuthZ *authz,
const char *identity,
Error **errp)
{
QAuthZClass *cls = QAUTHZ_GET_CLASS(authz);
bool allowed;
allowed = cls->is_allowed(authz, identity, errp);
trace_qauthz_is_allowed(authz, identity, allowed);
return allowed;
}
bool qauthz_is_allowed_by_id(const char *authzid,
const char *identity,
Error **errp)
{
QAuthZ *authz;
Object *obj;
Object *container;
container = object_get_objects_root();
obj = object_resolve_path_component(container,
authzid);
if (!obj) {
error_setg(errp, "Cannot find QAuthZ object ID %s",
authzid);
return false;
}
if (!object_dynamic_cast(obj, TYPE_QAUTHZ)) {
error_setg(errp, "Object '%s' is not a QAuthZ subclass",
authzid);
return false;
}
authz = QAUTHZ(obj);
return qauthz_is_allowed(authz, identity, errp);
}
static const TypeInfo authz_info = {
.parent = TYPE_OBJECT,
.name = TYPE_QAUTHZ,
.instance_size = sizeof(QAuthZ),
.class_size = sizeof(QAuthZClass),
.abstract = true,
};
static void qauthz_register_types(void)
{
type_register_static(&authz_info);
}
type_init(qauthz_register_types)
-272
View File
@@ -1,272 +0,0 @@
/*
* QEMU access control list authorization driver
*
* Copyright (c) 2018 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "authz/list.h"
#include "trace.h"
#include "qom/object_interfaces.h"
#include "qapi/qapi-visit-authz.h"
#include "qemu/module.h"
static bool qauthz_list_is_allowed(QAuthZ *authz,
const char *identity,
Error **errp)
{
QAuthZList *lauthz = QAUTHZ_LIST(authz);
QAuthZListRuleList *rules = lauthz->rules;
while (rules) {
QAuthZListRule *rule = rules->value;
QAuthZListFormat format = rule->has_format ? rule->format :
QAUTHZ_LIST_FORMAT_EXACT;
trace_qauthz_list_check_rule(authz, rule->match, identity,
format, rule->policy);
switch (format) {
case QAUTHZ_LIST_FORMAT_EXACT:
if (g_str_equal(rule->match, identity)) {
return rule->policy == QAUTHZ_LIST_POLICY_ALLOW;
}
break;
case QAUTHZ_LIST_FORMAT_GLOB:
if (g_pattern_match_simple(rule->match, identity)) {
return rule->policy == QAUTHZ_LIST_POLICY_ALLOW;
}
break;
default:
g_warn_if_reached();
return false;
}
rules = rules->next;
}
trace_qauthz_list_default_policy(authz, identity, lauthz->policy);
return lauthz->policy == QAUTHZ_LIST_POLICY_ALLOW;
}
static void
qauthz_list_prop_set_policy(Object *obj,
int value,
Error **errp G_GNUC_UNUSED)
{
QAuthZList *lauthz = QAUTHZ_LIST(obj);
lauthz->policy = value;
}
static int
qauthz_list_prop_get_policy(Object *obj,
Error **errp G_GNUC_UNUSED)
{
QAuthZList *lauthz = QAUTHZ_LIST(obj);
return lauthz->policy;
}
static void
qauthz_list_prop_get_rules(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
QAuthZList *lauthz = QAUTHZ_LIST(obj);
visit_type_QAuthZListRuleList(v, name, &lauthz->rules, errp);
}
static void
qauthz_list_prop_set_rules(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
QAuthZList *lauthz = QAUTHZ_LIST(obj);
QAuthZListRuleList *oldrules;
oldrules = lauthz->rules;
visit_type_QAuthZListRuleList(v, name, &lauthz->rules, errp);
qapi_free_QAuthZListRuleList(oldrules);
}
static void
qauthz_list_finalize(Object *obj)
{
QAuthZList *lauthz = QAUTHZ_LIST(obj);
qapi_free_QAuthZListRuleList(lauthz->rules);
}
static void
qauthz_list_class_init(ObjectClass *oc, void *data)
{
QAuthZClass *authz = QAUTHZ_CLASS(oc);
object_class_property_add_enum(oc, "policy",
"QAuthZListPolicy",
&QAuthZListPolicy_lookup,
qauthz_list_prop_get_policy,
qauthz_list_prop_set_policy,
NULL);
object_class_property_add(oc, "rules", "QAuthZListRule",
qauthz_list_prop_get_rules,
qauthz_list_prop_set_rules,
NULL, NULL, NULL);
authz->is_allowed = qauthz_list_is_allowed;
}
QAuthZList *qauthz_list_new(const char *id,
QAuthZListPolicy policy,
Error **errp)
{
return QAUTHZ_LIST(
object_new_with_props(TYPE_QAUTHZ_LIST,
object_get_objects_root(),
id, errp,
"policy", QAuthZListPolicy_str(policy),
NULL));
}
ssize_t qauthz_list_append_rule(QAuthZList *auth,
const char *match,
QAuthZListPolicy policy,
QAuthZListFormat format,
Error **errp)
{
QAuthZListRule *rule;
QAuthZListRuleList *rules, *tmp;
size_t i = 0;
rule = g_new0(QAuthZListRule, 1);
rule->policy = policy;
rule->match = g_strdup(match);
rule->format = format;
rule->has_format = true;
tmp = g_new0(QAuthZListRuleList, 1);
tmp->value = rule;
rules = auth->rules;
if (rules) {
while (rules->next) {
i++;
rules = rules->next;
}
rules->next = tmp;
return i + 1;
} else {
auth->rules = tmp;
return 0;
}
}
ssize_t qauthz_list_insert_rule(QAuthZList *auth,
const char *match,
QAuthZListPolicy policy,
QAuthZListFormat format,
size_t index,
Error **errp)
{
QAuthZListRule *rule;
QAuthZListRuleList *rules, *tmp;
size_t i = 0;
rule = g_new0(QAuthZListRule, 1);
rule->policy = policy;
rule->match = g_strdup(match);
rule->format = format;
rule->has_format = true;
tmp = g_new0(QAuthZListRuleList, 1);
tmp->value = rule;
rules = auth->rules;
if (rules && index > 0) {
while (rules->next && i < (index - 1)) {
i++;
rules = rules->next;
}
tmp->next = rules->next;
rules->next = tmp;
return i + 1;
} else {
tmp->next = auth->rules;
auth->rules = tmp;
return 0;
}
}
ssize_t qauthz_list_delete_rule(QAuthZList *auth, const char *match)
{
QAuthZListRule *rule;
QAuthZListRuleList *rules, *prev;
size_t i = 0;
prev = NULL;
rules = auth->rules;
while (rules) {
rule = rules->value;
if (g_str_equal(rule->match, match)) {
if (prev) {
prev->next = rules->next;
} else {
auth->rules = rules->next;
}
rules->next = NULL;
qapi_free_QAuthZListRuleList(rules);
return i;
}
prev = rules;
rules = rules->next;
i++;
}
return -1;
}
static const TypeInfo qauthz_list_info = {
.parent = TYPE_QAUTHZ,
.name = TYPE_QAUTHZ_LIST,
.instance_size = sizeof(QAuthZList),
.instance_finalize = qauthz_list_finalize,
.class_size = sizeof(QAuthZListClass),
.class_init = qauthz_list_class_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_USER_CREATABLE },
{ }
}
};
static void
qauthz_list_register_types(void)
{
type_register_static(&qauthz_list_info);
}
type_init(qauthz_list_register_types);
-284
View File
@@ -1,284 +0,0 @@
/*
* QEMU access control list file authorization driver
*
* Copyright (c) 2018 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "authz/listfile.h"
#include "trace.h"
#include "qemu/error-report.h"
#include "qemu/main-loop.h"
#include "qemu/module.h"
#include "qemu/sockets.h"
#include "qemu/filemonitor.h"
#include "qom/object_interfaces.h"
#include "qapi/qapi-visit-authz.h"
#include "qapi/qmp/qjson.h"
#include "qapi/qmp/qobject.h"
#include "qapi/qmp/qerror.h"
#include "qapi/qobject-input-visitor.h"
static bool
qauthz_list_file_is_allowed(QAuthZ *authz,
const char *identity,
Error **errp)
{
QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(authz);
if (fauthz->list) {
return qauthz_is_allowed(fauthz->list, identity, errp);
}
return false;
}
static QAuthZ *
qauthz_list_file_load(QAuthZListFile *fauthz, Error **errp)
{
GError *err = NULL;
gchar *content = NULL;
gsize len;
QObject *obj = NULL;
QDict *pdict;
Visitor *v = NULL;
QAuthZ *ret = NULL;
trace_qauthz_list_file_load(fauthz, fauthz->filename);
if (!g_file_get_contents(fauthz->filename, &content, &len, &err)) {
error_setg(errp, "Unable to read '%s': %s",
fauthz->filename, err->message);
goto cleanup;
}
obj = qobject_from_json(content, errp);
if (!obj) {
goto cleanup;
}
pdict = qobject_to(QDict, obj);
if (!pdict) {
error_setg(errp, QERR_INVALID_PARAMETER_TYPE, "obj", "dict");
goto cleanup;
}
v = qobject_input_visitor_new(obj);
ret = (QAuthZ *)user_creatable_add_type(TYPE_QAUTHZ_LIST,
NULL, pdict, v, errp);
cleanup:
visit_free(v);
qobject_unref(obj);
if (err) {
g_error_free(err);
}
g_free(content);
return ret;
}
static void
qauthz_list_file_event(int64_t wd G_GNUC_UNUSED,
QFileMonitorEvent ev G_GNUC_UNUSED,
const char *name G_GNUC_UNUSED,
void *opaque)
{
QAuthZListFile *fauthz = opaque;
Error *err = NULL;
if (ev != QFILE_MONITOR_EVENT_MODIFIED &&
ev != QFILE_MONITOR_EVENT_CREATED) {
return;
}
object_unref(OBJECT(fauthz->list));
fauthz->list = qauthz_list_file_load(fauthz, &err);
trace_qauthz_list_file_refresh(fauthz,
fauthz->filename, fauthz->list ? 1 : 0);
if (!fauthz->list) {
error_report_err(err);
}
}
static void
qauthz_list_file_complete(UserCreatable *uc, Error **errp)
{
QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(uc);
gchar *dir = NULL, *file = NULL;
fauthz->list = qauthz_list_file_load(fauthz, errp);
if (!fauthz->refresh) {
return;
}
fauthz->file_monitor = qemu_file_monitor_new(errp);
if (!fauthz->file_monitor) {
return;
}
dir = g_path_get_dirname(fauthz->filename);
if (g_str_equal(dir, ".")) {
error_setg(errp, "Filename must be an absolute path");
goto cleanup;
}
file = g_path_get_basename(fauthz->filename);
if (g_str_equal(file, ".")) {
error_setg(errp, "Path has no trailing filename component");
goto cleanup;
}
fauthz->file_watch = qemu_file_monitor_add_watch(
fauthz->file_monitor, dir, file,
qauthz_list_file_event, fauthz, errp);
if (fauthz->file_watch < 0) {
goto cleanup;
}
cleanup:
g_free(file);
g_free(dir);
}
static void
qauthz_list_file_prop_set_filename(Object *obj,
const char *value,
Error **errp G_GNUC_UNUSED)
{
QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(obj);
g_free(fauthz->filename);
fauthz->filename = g_strdup(value);
}
static char *
qauthz_list_file_prop_get_filename(Object *obj,
Error **errp G_GNUC_UNUSED)
{
QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(obj);
return g_strdup(fauthz->filename);
}
static void
qauthz_list_file_prop_set_refresh(Object *obj,
bool value,
Error **errp G_GNUC_UNUSED)
{
QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(obj);
fauthz->refresh = value;
}
static bool
qauthz_list_file_prop_get_refresh(Object *obj,
Error **errp G_GNUC_UNUSED)
{
QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(obj);
return fauthz->refresh;
}
static void
qauthz_list_file_finalize(Object *obj)
{
QAuthZListFile *fauthz = QAUTHZ_LIST_FILE(obj);
object_unref(OBJECT(fauthz->list));
g_free(fauthz->filename);
qemu_file_monitor_free(fauthz->file_monitor);
}
static void
qauthz_list_file_class_init(ObjectClass *oc, void *data)
{
UserCreatableClass *ucc = USER_CREATABLE_CLASS(oc);
QAuthZClass *authz = QAUTHZ_CLASS(oc);
ucc->complete = qauthz_list_file_complete;
object_class_property_add_str(oc, "filename",
qauthz_list_file_prop_get_filename,
qauthz_list_file_prop_set_filename,
NULL);
object_class_property_add_bool(oc, "refresh",
qauthz_list_file_prop_get_refresh,
qauthz_list_file_prop_set_refresh,
NULL);
authz->is_allowed = qauthz_list_file_is_allowed;
}
static void
qauthz_list_file_init(Object *obj)
{
QAuthZListFile *authz = QAUTHZ_LIST_FILE(obj);
authz->file_watch = -1;
#ifdef CONFIG_INOTIFY1
authz->refresh = true;
#endif
}
QAuthZListFile *qauthz_list_file_new(const char *id,
const char *filename,
bool refresh,
Error **errp)
{
return QAUTHZ_LIST_FILE(
object_new_with_props(TYPE_QAUTHZ_LIST_FILE,
object_get_objects_root(),
id, errp,
"filename", filename,
"refresh", refresh ? "yes" : "no",
NULL));
}
static const TypeInfo qauthz_list_file_info = {
.parent = TYPE_QAUTHZ,
.name = TYPE_QAUTHZ_LIST_FILE,
.instance_init = qauthz_list_file_init,
.instance_size = sizeof(QAuthZListFile),
.instance_finalize = qauthz_list_file_finalize,
.class_size = sizeof(QAuthZListFileClass),
.class_init = qauthz_list_file_class_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_USER_CREATABLE },
{ }
}
};
static void
qauthz_list_file_register_types(void)
{
type_register_static(&qauthz_list_file_info);
}
type_init(qauthz_list_file_register_types);
-149
View File
@@ -1,149 +0,0 @@
/*
* QEMU PAM authorization driver
*
* Copyright (c) 2018 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "authz/pamacct.h"
#include "trace.h"
#include "qemu/module.h"
#include "qom/object_interfaces.h"
#include <security/pam_appl.h>
static bool qauthz_pam_is_allowed(QAuthZ *authz,
const char *identity,
Error **errp)
{
QAuthZPAM *pauthz = QAUTHZ_PAM(authz);
const struct pam_conv pam_conversation = { 0 };
pam_handle_t *pamh = NULL;
int ret;
trace_qauthz_pam_check(authz, identity, pauthz->service);
ret = pam_start(pauthz->service,
identity,
&pam_conversation,
&pamh);
if (ret != PAM_SUCCESS) {
error_setg(errp, "Unable to start PAM transaction: %s",
pam_strerror(NULL, ret));
return false;
}
ret = pam_acct_mgmt(pamh, PAM_SILENT);
pam_end(pamh, ret);
if (ret != PAM_SUCCESS) {
error_setg(errp, "Unable to authorize user '%s': %s",
identity, pam_strerror(pamh, ret));
return false;
}
return true;
}
static void
qauthz_pam_prop_set_service(Object *obj,
const char *service,
Error **errp G_GNUC_UNUSED)
{
QAuthZPAM *pauthz = QAUTHZ_PAM(obj);
g_free(pauthz->service);
pauthz->service = g_strdup(service);
}
static char *
qauthz_pam_prop_get_service(Object *obj,
Error **errp G_GNUC_UNUSED)
{
QAuthZPAM *pauthz = QAUTHZ_PAM(obj);
return g_strdup(pauthz->service);
}
static void
qauthz_pam_complete(UserCreatable *uc, Error **errp)
{
}
static void
qauthz_pam_finalize(Object *obj)
{
QAuthZPAM *pauthz = QAUTHZ_PAM(obj);
g_free(pauthz->service);
}
static void
qauthz_pam_class_init(ObjectClass *oc, void *data)
{
UserCreatableClass *ucc = USER_CREATABLE_CLASS(oc);
QAuthZClass *authz = QAUTHZ_CLASS(oc);
ucc->complete = qauthz_pam_complete;
authz->is_allowed = qauthz_pam_is_allowed;
object_class_property_add_str(oc, "service",
qauthz_pam_prop_get_service,
qauthz_pam_prop_set_service,
NULL);
}
QAuthZPAM *qauthz_pam_new(const char *id,
const char *service,
Error **errp)
{
return QAUTHZ_PAM(
object_new_with_props(TYPE_QAUTHZ_PAM,
object_get_objects_root(),
id, errp,
"service", service,
NULL));
}
static const TypeInfo qauthz_pam_info = {
.parent = TYPE_QAUTHZ,
.name = TYPE_QAUTHZ_PAM,
.instance_size = sizeof(QAuthZPAM),
.instance_finalize = qauthz_pam_finalize,
.class_size = sizeof(QAuthZPAMClass),
.class_init = qauthz_pam_class_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_USER_CREATABLE },
{ }
}
};
static void
qauthz_pam_register_types(void)
{
type_register_static(&qauthz_pam_info);
}
type_init(qauthz_pam_register_types);
-116
View File
@@ -1,116 +0,0 @@
/*
* QEMU simple authorization driver
*
* Copyright (c) 2018 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "authz/simple.h"
#include "trace.h"
#include "qemu/module.h"
#include "qom/object_interfaces.h"
static bool qauthz_simple_is_allowed(QAuthZ *authz,
const char *identity,
Error **errp)
{
QAuthZSimple *sauthz = QAUTHZ_SIMPLE(authz);
trace_qauthz_simple_is_allowed(authz, sauthz->identity, identity);
return g_str_equal(identity, sauthz->identity);
}
static void
qauthz_simple_prop_set_identity(Object *obj,
const char *value,
Error **errp G_GNUC_UNUSED)
{
QAuthZSimple *sauthz = QAUTHZ_SIMPLE(obj);
g_free(sauthz->identity);
sauthz->identity = g_strdup(value);
}
static char *
qauthz_simple_prop_get_identity(Object *obj,
Error **errp G_GNUC_UNUSED)
{
QAuthZSimple *sauthz = QAUTHZ_SIMPLE(obj);
return g_strdup(sauthz->identity);
}
static void
qauthz_simple_finalize(Object *obj)
{
QAuthZSimple *sauthz = QAUTHZ_SIMPLE(obj);
g_free(sauthz->identity);
}
static void
qauthz_simple_class_init(ObjectClass *oc, void *data)
{
QAuthZClass *authz = QAUTHZ_CLASS(oc);
authz->is_allowed = qauthz_simple_is_allowed;
object_class_property_add_str(oc, "identity",
qauthz_simple_prop_get_identity,
qauthz_simple_prop_set_identity,
NULL);
}
QAuthZSimple *qauthz_simple_new(const char *id,
const char *identity,
Error **errp)
{
return QAUTHZ_SIMPLE(
object_new_with_props(TYPE_QAUTHZ_SIMPLE,
object_get_objects_root(),
id, errp,
"identity", identity,
NULL));
}
static const TypeInfo qauthz_simple_info = {
.parent = TYPE_QAUTHZ,
.name = TYPE_QAUTHZ_SIMPLE,
.instance_size = sizeof(QAuthZSimple),
.instance_finalize = qauthz_simple_finalize,
.class_size = sizeof(QAuthZSimpleClass),
.class_init = qauthz_simple_class_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_USER_CREATABLE },
{ }
}
};
static void
qauthz_simple_register_types(void)
{
type_register_static(&qauthz_simple_info);
}
type_init(qauthz_simple_register_types);
-18
View File
@@ -1,18 +0,0 @@
# See docs/devel/tracing.txt for syntax documentation.
# base.c
qauthz_is_allowed(void *authz, const char *identity, bool allowed) "AuthZ %p check identity=%s allowed=%d"
# simple.c
qauthz_simple_is_allowed(void *authz, const char *wantidentity, const char *gotidentity) "AuthZ simple %p check want identity=%s got identity=%s"
# list.c
qauthz_list_check_rule(void *authz, const char *identity, const char *rule, int format, int policy) "AuthZ list %p check rule=%s identity=%s format=%d policy=%d"
qauthz_list_default_policy(void *authz, const char *identity, int policy) "AuthZ list %p default identity=%s policy=%d"
# listfile.c
qauthz_list_file_load(void *authz, const char *filename) "AuthZ file %p load filename=%s"
qauthz_list_file_refresh(void *authz, const char *filename, int success) "AuthZ file %p load filename=%s success=%d"
# pamacct.c
qauthz_pam_check(void *authz, const char *identity, const char *service) "AuthZ PAM %p identity=%s service=%s"
+5 -10
View File
@@ -1,23 +1,18 @@
common-obj-y += rng.o rng-egd.o rng-builtin.o
common-obj-y += rng.o rng-egd.o
common-obj-$(CONFIG_POSIX) += rng-random.o
common-obj-$(CONFIG_TPM) += tpm.o
common-obj-y += hostmem.o hostmem-ram.o
common-obj-$(CONFIG_POSIX) += hostmem-file.o
common-obj-$(CONFIG_LINUX) += hostmem-file.o
common-obj-y += cryptodev.o
common-obj-y += cryptodev-builtin.o
ifeq ($(CONFIG_VIRTIO_CRYPTO),y)
ifeq ($(CONFIG_VIRTIO),y)
common-obj-y += cryptodev-vhost.o
common-obj-$(CONFIG_VHOST_CRYPTO) += cryptodev-vhost-user.o
common-obj-$(call land,$(CONFIG_VHOST_USER),$(CONFIG_LINUX)) += \
cryptodev-vhost-user.o
endif
common-obj-$(call land,$(CONFIG_VHOST_USER),$(CONFIG_VIRTIO)) += vhost-user.o
common-obj-$(CONFIG_LINUX) += hostmem-memfd.o
common-obj-$(CONFIG_GIO) += dbus-vmstate.o
dbus-vmstate.o-cflags = $(GIO_CFLAGS)
dbus-vmstate.o-libs = $(GIO_LIBS)
+1
View File
@@ -23,6 +23,7 @@
#include "qemu/osdep.h"
#include "sysemu/cryptodev.h"
#include "hw/boards.h"
#include "qapi/error.h"
#include "standard-headers/linux/virtio_crypto.h"
#include "crypto/cipher.h"
+8 -15
View File
@@ -22,10 +22,10 @@
*/
#include "qemu/osdep.h"
#include "hw/boards.h"
#include "qapi/error.h"
#include "qapi/qmp/qerror.h"
#include "qemu/error-report.h"
#include "hw/virtio/vhost-user.h"
#include "standard-headers/linux/virtio_crypto.h"
#include "sysemu/cryptodev-vhost.h"
#include "chardev/char-fe.h"
@@ -46,7 +46,6 @@
typedef struct CryptoDevBackendVhostUser {
CryptoDevBackend parent_obj;
VhostUserState vhost_user;
CharBackend chr;
char *chr_name;
bool opened;
@@ -103,7 +102,7 @@ cryptodev_vhost_user_start(int queues,
continue;
}
options.opaque = &s->vhost_user;
options.opaque = &s->chr;
options.backend_type = VHOST_BACKEND_TYPE_USER;
options.cc = b->conf.peers.ccs[i];
s->vhost_crypto[i] = cryptodev_vhost_init(&options);
@@ -152,10 +151,11 @@ cryptodev_vhost_claim_chardev(CryptoDevBackendVhostUser *s,
return chr;
}
static void cryptodev_vhost_user_event(void *opaque, QEMUChrEvent event)
static void cryptodev_vhost_user_event(void *opaque, int event)
{
CryptoDevBackendVhostUser *s = opaque;
CryptoDevBackend *b = CRYPTODEV_BACKEND(s);
Error *err = NULL;
int queues = b->conf.peers.queues;
assert(queues < MAX_CRYPTO_QUEUE_NUM);
@@ -171,11 +171,10 @@ static void cryptodev_vhost_user_event(void *opaque, QEMUChrEvent event)
b->ready = false;
cryptodev_vhost_user_stop(queues, s);
break;
case CHR_EVENT_BREAK:
case CHR_EVENT_MUX_IN:
case CHR_EVENT_MUX_OUT:
/* Ignore */
break;
}
if (err) {
error_report_err(err);
}
}
@@ -216,10 +215,6 @@ static void cryptodev_vhost_user_init(
}
}
if (!vhost_user_init(&s->vhost_user, &s->chr, errp)) {
return;
}
qemu_chr_fe_set_handlers(&s->chr, NULL, NULL,
cryptodev_vhost_user_event, NULL, s, NULL, true);
@@ -304,8 +299,6 @@ static void cryptodev_vhost_user_cleanup(
backend->conf.peers.ccs[i] = NULL;
}
}
vhost_user_cleanup(&s->vhost_user);
}
static void cryptodev_vhost_user_set_chardev(Object *obj,
+11 -1
View File
@@ -23,6 +23,7 @@
#include "qemu/osdep.h"
#include "sysemu/cryptodev.h"
#include "hw/boards.h"
#include "qapi/error.h"
#include "qapi/visitor.h"
#include "qemu/config-file.h"
@@ -176,10 +177,19 @@ cryptodev_backend_complete(UserCreatable *uc, Error **errp)
{
CryptoDevBackend *backend = CRYPTODEV_BACKEND(uc);
CryptoDevBackendClass *bc = CRYPTODEV_BACKEND_GET_CLASS(uc);
Error *local_err = NULL;
if (bc->init) {
bc->init(backend, errp);
bc->init(backend, &local_err);
if (local_err) {
goto out;
}
}
return;
out:
error_propagate(errp, local_err);
}
void cryptodev_backend_set_used(CryptoDevBackend *backend, bool used)
-511
View File
@@ -1,511 +0,0 @@
/*
* QEMU dbus-vmstate
*
* Copyright (C) 2019 Red Hat Inc
*
* Authors:
* Marc-André Lureau <marcandre.lureau@redhat.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "qemu/units.h"
#include "qemu/dbus.h"
#include "qemu/error-report.h"
#include "qapi/error.h"
#include "qom/object_interfaces.h"
#include "qapi/qmp/qerror.h"
#include "migration/vmstate.h"
#include "trace.h"
typedef struct DBusVMState DBusVMState;
typedef struct DBusVMStateClass DBusVMStateClass;
#define TYPE_DBUS_VMSTATE "dbus-vmstate"
#define DBUS_VMSTATE(obj) \
OBJECT_CHECK(DBusVMState, (obj), TYPE_DBUS_VMSTATE)
#define DBUS_VMSTATE_GET_CLASS(obj) \
OBJECT_GET_CLASS(DBusVMStateClass, (obj), TYPE_DBUS_VMSTATE)
#define DBUS_VMSTATE_CLASS(klass) \
OBJECT_CLASS_CHECK(DBusVMStateClass, (klass), TYPE_DBUS_VMSTATE)
struct DBusVMStateClass {
ObjectClass parent_class;
};
struct DBusVMState {
Object parent;
GDBusConnection *bus;
char *dbus_addr;
char *id_list;
uint32_t data_size;
uint8_t *data;
};
static const GDBusPropertyInfo vmstate_property_info[] = {
{ -1, (char *) "Id", (char *) "s",
G_DBUS_PROPERTY_INFO_FLAGS_READABLE, NULL },
};
static const GDBusPropertyInfo * const vmstate_property_info_pointers[] = {
&vmstate_property_info[0],
NULL
};
static const GDBusInterfaceInfo vmstate1_interface_info = {
-1,
(char *) "org.qemu.VMState1",
(GDBusMethodInfo **) NULL,
(GDBusSignalInfo **) NULL,
(GDBusPropertyInfo **) &vmstate_property_info_pointers,
NULL,
};
#define DBUS_VMSTATE_SIZE_LIMIT (1 * MiB)
static GHashTable *
get_id_list_set(DBusVMState *self)
{
g_auto(GStrv) ids = NULL;
g_autoptr(GHashTable) set = NULL;
int i;
if (!self->id_list) {
return NULL;
}
ids = g_strsplit(self->id_list, ",", -1);
set = g_hash_table_new_full(g_str_hash, g_str_equal, g_free, NULL);
for (i = 0; ids[i]; i++) {
g_hash_table_add(set, ids[i]);
ids[i] = NULL;
}
return g_steal_pointer(&set);
}
static GHashTable *
dbus_get_proxies(DBusVMState *self, GError **err)
{
g_autoptr(GHashTable) proxies = NULL;
g_autoptr(GHashTable) ids = NULL;
g_auto(GStrv) names = NULL;
Error *error = NULL;
size_t i;
ids = get_id_list_set(self);
proxies = g_hash_table_new_full(g_str_hash, g_str_equal,
g_free, g_object_unref);
names = qemu_dbus_get_queued_owners(self->bus, "org.qemu.VMState1", &error);
if (!names) {
g_set_error(err, G_IO_ERROR, G_IO_ERROR_FAILED, "%s",
error_get_pretty(error));
error_free(error);
return NULL;
}
for (i = 0; names[i]; i++) {
g_autoptr(GDBusProxy) proxy = NULL;
g_autoptr(GVariant) result = NULL;
g_autofree char *id = NULL;
size_t size;
proxy = g_dbus_proxy_new_sync(self->bus, G_DBUS_PROXY_FLAGS_NONE,
(GDBusInterfaceInfo *) &vmstate1_interface_info,
names[i],
"/org/qemu/VMState1",
"org.qemu.VMState1",
NULL, err);
if (!proxy) {
return NULL;
}
result = g_dbus_proxy_get_cached_property(proxy, "Id");
if (!result) {
g_set_error_literal(err, G_IO_ERROR, G_IO_ERROR_FAILED,
"VMState Id property is missing.");
return NULL;
}
id = g_variant_dup_string(result, &size);
if (ids && !g_hash_table_remove(ids, id)) {
g_clear_pointer(&id, g_free);
g_clear_object(&proxy);
continue;
}
if (size == 0 || size >= 256) {
g_set_error(err, G_IO_ERROR, G_IO_ERROR_FAILED,
"VMState Id '%s' is invalid.", id);
return NULL;
}
if (!g_hash_table_insert(proxies, id, proxy)) {
g_set_error(err, G_IO_ERROR, G_IO_ERROR_FAILED,
"Duplicated VMState Id '%s'", id);
return NULL;
}
id = NULL;
proxy = NULL;
g_clear_pointer(&result, g_variant_unref);
}
if (ids) {
g_autofree char **left = NULL;
left = (char **)g_hash_table_get_keys_as_array(ids, NULL);
if (*left) {
g_autofree char *leftids = g_strjoinv(",", left);
g_set_error(err, G_IO_ERROR, G_IO_ERROR_FAILED,
"Required VMState Id are missing: %s", leftids);
return NULL;
}
}
return g_steal_pointer(&proxies);
}
static int
dbus_load_state_proxy(GDBusProxy *proxy, const uint8_t *data, size_t size)
{
g_autoptr(GError) err = NULL;
g_autoptr(GVariant) result = NULL;
g_autoptr(GVariant) value = NULL;
value = g_variant_new_fixed_array(G_VARIANT_TYPE_BYTE,
data, size, sizeof(char));
result = g_dbus_proxy_call_sync(proxy, "Load",
g_variant_new("(@ay)",
g_steal_pointer(&value)),
G_DBUS_CALL_FLAGS_NO_AUTO_START,
-1, NULL, &err);
if (!result) {
error_report("%s: Failed to Load: %s", __func__, err->message);
return -1;
}
return 0;
}
static int dbus_vmstate_post_load(void *opaque, int version_id)
{
DBusVMState *self = DBUS_VMSTATE(opaque);
g_autoptr(GInputStream) m = NULL;
g_autoptr(GDataInputStream) s = NULL;
g_autoptr(GError) err = NULL;
g_autoptr(GHashTable) proxies = NULL;
uint32_t nelem;
trace_dbus_vmstate_post_load(version_id);
proxies = dbus_get_proxies(self, &err);
if (!proxies) {
error_report("%s: Failed to get proxies: %s", __func__, err->message);
return -1;
}
m = g_memory_input_stream_new_from_data(self->data, self->data_size, NULL);
s = g_data_input_stream_new(m);
g_data_input_stream_set_byte_order(s, G_DATA_STREAM_BYTE_ORDER_BIG_ENDIAN);
nelem = g_data_input_stream_read_uint32(s, NULL, &err);
if (err) {
goto error;
}
while (nelem > 0) {
GDBusProxy *proxy = NULL;
uint32_t len;
gsize bytes_read, avail;
char id[256];
len = g_data_input_stream_read_uint32(s, NULL, &err);
if (err) {
goto error;
}
if (len >= 256) {
error_report("%s: Invalid DBus vmstate proxy name %u",
__func__, len);
return -1;
}
if (!g_input_stream_read_all(G_INPUT_STREAM(s), id, len,
&bytes_read, NULL, &err)) {
goto error;
}
g_return_val_if_fail(bytes_read == len, -1);
id[len] = 0;
trace_dbus_vmstate_loading(id);
proxy = g_hash_table_lookup(proxies, id);
if (!proxy) {
error_report("%s: Failed to find proxy Id '%s'", __func__, id);
return -1;
}
len = g_data_input_stream_read_uint32(s, NULL, &err);
avail = g_buffered_input_stream_get_available(
G_BUFFERED_INPUT_STREAM(s));
if (len > DBUS_VMSTATE_SIZE_LIMIT || len > avail) {
error_report("%s: Invalid vmstate size: %u", __func__, len);
return -1;
}
if (dbus_load_state_proxy(proxy,
g_buffered_input_stream_peek_buffer(G_BUFFERED_INPUT_STREAM(s),
NULL),
len) < 0) {
error_report("%s: Failed to restore Id '%s'", __func__, id);
return -1;
}
if (!g_seekable_seek(G_SEEKABLE(s), len, G_SEEK_CUR, NULL, &err)) {
goto error;
}
nelem -= 1;
}
return 0;
error:
error_report("%s: Failed to read from stream: %s", __func__, err->message);
return -1;
}
static void
dbus_save_state_proxy(gpointer key,
gpointer value,
gpointer user_data)
{
GDataOutputStream *s = user_data;
const char *id = key;
GDBusProxy *proxy = value;
g_autoptr(GVariant) result = NULL;
g_autoptr(GVariant) child = NULL;
g_autoptr(GError) err = NULL;
const uint8_t *data;
gsize size;
trace_dbus_vmstate_saving(id);
result = g_dbus_proxy_call_sync(proxy, "Save",
NULL, G_DBUS_CALL_FLAGS_NO_AUTO_START,
-1, NULL, &err);
if (!result) {
error_report("%s: Failed to Save: %s", __func__, err->message);
return;
}
child = g_variant_get_child_value(result, 0);
data = g_variant_get_fixed_array(child, &size, sizeof(char));
if (!data) {
error_report("%s: Failed to Save: not a byte array", __func__);
return;
}
if (size > DBUS_VMSTATE_SIZE_LIMIT) {
error_report("%s: Too large vmstate data to save: %zu",
__func__, (size_t)size);
return;
}
if (!g_data_output_stream_put_uint32(s, strlen(id), NULL, &err) ||
!g_data_output_stream_put_string(s, id, NULL, &err) ||
!g_data_output_stream_put_uint32(s, size, NULL, &err) ||
!g_output_stream_write_all(G_OUTPUT_STREAM(s),
data, size, NULL, NULL, &err)) {
error_report("%s: Failed to write to stream: %s",
__func__, err->message);
}
}
static int dbus_vmstate_pre_save(void *opaque)
{
DBusVMState *self = DBUS_VMSTATE(opaque);
g_autoptr(GOutputStream) m = NULL;
g_autoptr(GDataOutputStream) s = NULL;
g_autoptr(GHashTable) proxies = NULL;
g_autoptr(GError) err = NULL;
trace_dbus_vmstate_pre_save();
proxies = dbus_get_proxies(self, &err);
if (!proxies) {
error_report("%s: Failed to get proxies: %s", __func__, err->message);
return -1;
}
m = g_memory_output_stream_new_resizable();
s = g_data_output_stream_new(m);
g_data_output_stream_set_byte_order(s, G_DATA_STREAM_BYTE_ORDER_BIG_ENDIAN);
if (!g_data_output_stream_put_uint32(s, g_hash_table_size(proxies),
NULL, &err)) {
error_report("%s: Failed to write to stream: %s",
__func__, err->message);
return -1;
}
g_hash_table_foreach(proxies, dbus_save_state_proxy, s);
if (g_memory_output_stream_get_size(G_MEMORY_OUTPUT_STREAM(m))
> UINT32_MAX) {
error_report("%s: DBus vmstate buffer is too large", __func__);
return -1;
}
if (!g_output_stream_close(G_OUTPUT_STREAM(m), NULL, &err)) {
error_report("%s: Failed to close stream: %s", __func__, err->message);
return -1;
}
g_free(self->data);
self->data_size =
g_memory_output_stream_get_size(G_MEMORY_OUTPUT_STREAM(m));
self->data =
g_memory_output_stream_steal_data(G_MEMORY_OUTPUT_STREAM(m));
return 0;
}
static const VMStateDescription dbus_vmstate = {
.name = TYPE_DBUS_VMSTATE,
.version_id = 0,
.pre_save = dbus_vmstate_pre_save,
.post_load = dbus_vmstate_post_load,
.fields = (VMStateField[]) {
VMSTATE_UINT32(data_size, DBusVMState),
VMSTATE_VBUFFER_ALLOC_UINT32(data, DBusVMState, 0, 0, data_size),
VMSTATE_END_OF_LIST()
}
};
static void
dbus_vmstate_complete(UserCreatable *uc, Error **errp)
{
DBusVMState *self = DBUS_VMSTATE(uc);
g_autoptr(GError) err = NULL;
if (!object_resolve_path_type("", TYPE_DBUS_VMSTATE, NULL)) {
error_setg(errp, "There is already an instance of %s",
TYPE_DBUS_VMSTATE);
return;
}
if (!self->dbus_addr) {
error_setg(errp, QERR_MISSING_PARAMETER, "addr");
return;
}
self->bus = g_dbus_connection_new_for_address_sync(self->dbus_addr,
G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_CLIENT |
G_DBUS_CONNECTION_FLAGS_MESSAGE_BUS_CONNECTION,
NULL, NULL, &err);
if (err) {
error_setg(errp, "failed to connect to DBus: '%s'", err->message);
return;
}
if (vmstate_register(VMSTATE_IF(self), VMSTATE_INSTANCE_ID_ANY,
&dbus_vmstate, self) < 0) {
error_setg(errp, "Failed to register vmstate");
}
}
static void
dbus_vmstate_finalize(Object *o)
{
DBusVMState *self = DBUS_VMSTATE(o);
vmstate_unregister(VMSTATE_IF(self), &dbus_vmstate, self);
g_clear_object(&self->bus);
g_free(self->dbus_addr);
g_free(self->id_list);
g_free(self->data);
}
static char *
get_dbus_addr(Object *o, Error **errp)
{
DBusVMState *self = DBUS_VMSTATE(o);
return g_strdup(self->dbus_addr);
}
static void
set_dbus_addr(Object *o, const char *str, Error **errp)
{
DBusVMState *self = DBUS_VMSTATE(o);
g_free(self->dbus_addr);
self->dbus_addr = g_strdup(str);
}
static char *
get_id_list(Object *o, Error **errp)
{
DBusVMState *self = DBUS_VMSTATE(o);
return g_strdup(self->id_list);
}
static void
set_id_list(Object *o, const char *str, Error **errp)
{
DBusVMState *self = DBUS_VMSTATE(o);
g_free(self->id_list);
self->id_list = g_strdup(str);
}
static char *
dbus_vmstate_get_id(VMStateIf *vmif)
{
return g_strdup(TYPE_DBUS_VMSTATE);
}
static void
dbus_vmstate_class_init(ObjectClass *oc, void *data)
{
UserCreatableClass *ucc = USER_CREATABLE_CLASS(oc);
VMStateIfClass *vc = VMSTATE_IF_CLASS(oc);
ucc->complete = dbus_vmstate_complete;
vc->get_id = dbus_vmstate_get_id;
object_class_property_add_str(oc, "addr",
get_dbus_addr, set_dbus_addr,
&error_abort);
object_class_property_add_str(oc, "id-list",
get_id_list, set_id_list,
&error_abort);
}
static const TypeInfo dbus_vmstate_info = {
.name = TYPE_DBUS_VMSTATE,
.parent = TYPE_OBJECT,
.instance_size = sizeof(DBusVMState),
.instance_finalize = dbus_vmstate_finalize,
.class_size = sizeof(DBusVMStateClass),
.class_init = dbus_vmstate_class_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_USER_CREATABLE },
{ TYPE_VMSTATE_IF },
{ }
}
};
static void
register_types(void)
{
type_register_static(&dbus_vmstate_info);
}
type_init(register_types);
+24 -59
View File
@@ -9,15 +9,20 @@
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "qemu/error-report.h"
#include "qemu/module.h"
#include "qemu-common.h"
#include "sysemu/hostmem.h"
#include "sysemu/sysemu.h"
#include "qom/object_interfaces.h"
/* hostmem-file.c */
/**
* @TYPE_MEMORY_BACKEND_FILE:
* name of backend that uses mmap on a file descriptor
*/
#define TYPE_MEMORY_BACKEND_FILE "memory-backend-file"
#define MEMORY_BACKEND_FILE(obj) \
OBJECT_CHECK(HostMemoryBackendFile, (obj), TYPE_MEMORY_BACKEND_FILE)
@@ -26,21 +31,15 @@ typedef struct HostMemoryBackendFile HostMemoryBackendFile;
struct HostMemoryBackendFile {
HostMemoryBackend parent_obj;
bool discard_data;
char *mem_path;
uint64_t align;
bool discard_data;
bool is_pmem;
};
static void
file_backend_memory_alloc(HostMemoryBackend *backend, Error **errp)
{
#ifndef CONFIG_POSIX
error_setg(errp, "backend '%s' not supported on this host",
object_get_typename(OBJECT(backend)));
#else
HostMemoryBackendFile *fb = MEMORY_BACKEND_FILE(backend);
gchar *name;
if (!backend->size) {
error_setg(errp, "can't create backend with size 0");
@@ -50,15 +49,19 @@ file_backend_memory_alloc(HostMemoryBackend *backend, Error **errp)
error_setg(errp, "mem-path property not set");
return;
}
name = host_memory_backend_get_name(backend);
memory_region_init_ram_from_file(&backend->mr, OBJECT(backend),
name,
backend->size, fb->align,
(backend->share ? RAM_SHARED : 0) |
(fb->is_pmem ? RAM_PMEM : 0),
fb->mem_path, errp);
g_free(name);
#ifndef CONFIG_LINUX
error_setg(errp, "-mem-path not supported on this host");
#else
if (!host_memory_backend_mr_inited(backend)) {
gchar *path;
backend->force_prealloc = mem_prealloc;
path = object_get_canonical_path(OBJECT(backend));
memory_region_init_ram_from_file(&backend->mr, OBJECT(backend),
path,
backend->size, fb->align, backend->share,
fb->mem_path, errp);
g_free(path);
}
#endif
}
@@ -75,8 +78,7 @@ static void set_mem_path(Object *o, const char *str, Error **errp)
HostMemoryBackendFile *fb = MEMORY_BACKEND_FILE(o);
if (host_memory_backend_mr_inited(backend)) {
error_setg(errp, "cannot change property 'mem-path' of %s",
object_get_typename(o));
error_setg(errp, "cannot change property value");
return;
}
g_free(fb->mem_path);
@@ -114,8 +116,7 @@ static void file_memory_backend_set_align(Object *o, Visitor *v,
uint64_t val;
if (host_memory_backend_mr_inited(backend)) {
error_setg(&local_err, "cannot change property '%s' of %s",
name, object_get_typename(o));
error_setg(&local_err, "cannot change property value");
goto out;
}
@@ -129,39 +130,6 @@ static void file_memory_backend_set_align(Object *o, Visitor *v,
error_propagate(errp, local_err);
}
static bool file_memory_backend_get_pmem(Object *o, Error **errp)
{
return MEMORY_BACKEND_FILE(o)->is_pmem;
}
static void file_memory_backend_set_pmem(Object *o, bool value, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(o);
HostMemoryBackendFile *fb = MEMORY_BACKEND_FILE(o);
if (host_memory_backend_mr_inited(backend)) {
error_setg(errp, "cannot change property 'pmem' of %s.",
object_get_typename(o));
return;
}
#ifndef CONFIG_LIBPMEM
if (value) {
Error *local_err = NULL;
error_setg(&local_err,
"Lack of libpmem support while setting the 'pmem=on'"
" of %s. We can't ensure data persistence.",
object_get_typename(o));
error_propagate(errp, local_err);
return;
}
#endif
fb->is_pmem = value;
}
static void file_backend_unparent(Object *obj)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
@@ -193,9 +161,6 @@ file_backend_class_init(ObjectClass *oc, void *data)
file_memory_backend_get_align,
file_memory_backend_set_align,
NULL, NULL, &error_abort);
object_class_property_add_bool(oc, "pmem",
file_memory_backend_get_pmem, file_memory_backend_set_pmem,
&error_abort);
}
static void file_backend_instance_finalize(Object *o)
+17 -28
View File
@@ -9,13 +9,12 @@
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "sysemu/hostmem.h"
#include "sysemu/sysemu.h"
#include "qom/object_interfaces.h"
#include "qemu/memfd.h"
#include "qemu/module.h"
#include "qapi/error.h"
#define TYPE_MEMORY_BACKEND_MEMFD "memory-backend-memfd"
@@ -45,6 +44,11 @@ memfd_backend_memory_alloc(HostMemoryBackend *backend, Error **errp)
return;
}
if (host_memory_backend_mr_inited(backend)) {
return;
}
backend->force_prealloc = mem_prealloc;
fd = qemu_memfd_create(TYPE_MEMORY_BACKEND_MEMFD, backend->size,
m->hugetlb, m->hugetlbsize, m->seal ?
F_SEAL_GROW | F_SEAL_SHRINK | F_SEAL_SEAL : 0,
@@ -53,10 +57,9 @@ memfd_backend_memory_alloc(HostMemoryBackend *backend, Error **errp)
return;
}
name = host_memory_backend_get_name(backend);
name = object_get_canonical_path(OBJECT(backend));
memory_region_init_ram_from_fd(&backend->mr, OBJECT(backend),
name, backend->size,
backend->share, fd, errp);
name, backend->size, true, fd, errp);
g_free(name);
}
@@ -128,7 +131,6 @@ memfd_backend_instance_init(Object *obj)
/* default to sealed file */
m->seal = true;
MEMORY_BACKEND(m)->share = true;
}
static void
@@ -138,29 +140,18 @@ memfd_backend_class_init(ObjectClass *oc, void *data)
bc->alloc = memfd_backend_memory_alloc;
if (qemu_memfd_check(MFD_HUGETLB)) {
object_class_property_add_bool(oc, "hugetlb",
memfd_backend_get_hugetlb,
memfd_backend_set_hugetlb,
&error_abort);
object_class_property_set_description(oc, "hugetlb",
"Use huge pages",
&error_abort);
object_class_property_add(oc, "hugetlbsize", "int",
memfd_backend_get_hugetlbsize,
memfd_backend_set_hugetlbsize,
NULL, NULL, &error_abort);
object_class_property_set_description(oc, "hugetlbsize",
"Huge pages size (ex: 2M, 1G)",
&error_abort);
}
object_class_property_add_bool(oc, "hugetlb",
memfd_backend_get_hugetlb,
memfd_backend_set_hugetlb,
&error_abort);
object_class_property_add(oc, "hugetlbsize", "int",
memfd_backend_get_hugetlbsize,
memfd_backend_set_hugetlbsize,
NULL, NULL, &error_abort);
object_class_property_add_bool(oc, "seal",
memfd_backend_get_seal,
memfd_backend_set_seal,
&error_abort);
object_class_property_set_description(oc, "seal",
"Seal growing & shrinking",
&error_abort);
}
static const TypeInfo memfd_backend_info = {
@@ -173,9 +164,7 @@ static const TypeInfo memfd_backend_info = {
static void register_types(void)
{
if (qemu_memfd_check(MFD_ALLOW_SEALING)) {
type_register_static(&memfd_backend_info);
}
type_register_static(&memfd_backend_info);
}
type_init(register_types);
+7 -6
View File
@@ -9,27 +9,28 @@
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "sysemu/hostmem.h"
#include "qapi/error.h"
#include "qemu/module.h"
#include "qom/object_interfaces.h"
#define TYPE_MEMORY_BACKEND_RAM "memory-backend-ram"
static void
ram_backend_memory_alloc(HostMemoryBackend *backend, Error **errp)
{
char *name;
char *path;
if (!backend->size) {
error_setg(errp, "can't create backend with size 0");
return;
}
name = host_memory_backend_get_name(backend);
memory_region_init_ram_shared_nomigrate(&backend->mr, OBJECT(backend), name,
path = object_get_canonical_path_component(OBJECT(backend));
memory_region_init_ram_shared_nomigrate(&backend->mr, OBJECT(backend), path,
backend->size, backend->share, errp);
g_free(name);
g_free(path);
}
static void
+50 -134
View File
@@ -12,14 +12,12 @@
#include "qemu/osdep.h"
#include "sysemu/hostmem.h"
#include "sysemu/sysemu.h"
#include "hw/boards.h"
#include "qapi/error.h"
#include "qapi/qapi-builtin-visit.h"
#include "qapi/visitor.h"
#include "qemu/config-file.h"
#include "qom/object_interfaces.h"
#include "qemu/mmap-alloc.h"
#ifdef CONFIG_NUMA
#include <numaif.h>
@@ -29,16 +27,6 @@ QEMU_BUILD_BUG_ON(HOST_MEM_POLICY_BIND != MPOL_BIND);
QEMU_BUILD_BUG_ON(HOST_MEM_POLICY_INTERLEAVE != MPOL_INTERLEAVE);
#endif
char *
host_memory_backend_get_name(HostMemoryBackend *backend)
{
if (!backend->use_canonical_path) {
return object_get_canonical_path_component(OBJECT(backend));
}
return object_get_canonical_path(OBJECT(backend));
}
static void
host_memory_backend_get_size(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
@@ -58,8 +46,7 @@ host_memory_backend_set_size(Object *obj, Visitor *v, const char *name,
uint64_t value;
if (host_memory_backend_mr_inited(backend)) {
error_setg(&local_err, "cannot change property %s of %s ",
name, object_get_typename(obj));
error_setg(&local_err, "cannot change property value");
goto out;
}
@@ -68,9 +55,8 @@ host_memory_backend_set_size(Object *obj, Visitor *v, const char *name,
goto out;
}
if (!value) {
error_setg(&local_err,
"property '%s' of %s doesn't take value '%" PRIu64 "'",
name, object_get_typename(obj), value);
error_setg(&local_err, "Property '%s.%s' doesn't take value '%"
PRIu64 "'", object_get_typename(obj), name, value);
goto out;
}
backend->size = value;
@@ -89,7 +75,7 @@ host_memory_backend_get_host_nodes(Object *obj, Visitor *v, const char *name,
value = find_first_bit(backend->host_nodes, MAX_NODES);
if (value == MAX_NODES) {
goto ret;
return;
}
*node = g_malloc0(sizeof(**node));
@@ -107,7 +93,6 @@ host_memory_backend_get_host_nodes(Object *obj, Visitor *v, const char *name,
node = &(*node)->next;
} while (true);
ret:
visit_type_uint16List(v, name, &host_nodes, errp);
}
@@ -117,23 +102,14 @@ host_memory_backend_set_host_nodes(Object *obj, Visitor *v, const char *name,
{
#ifdef CONFIG_NUMA
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
uint16List *l, *host_nodes = NULL;
uint16List *l = NULL;
visit_type_uint16List(v, name, &host_nodes, errp);
visit_type_uint16List(v, name, &l, errp);
for (l = host_nodes; l; l = l->next) {
if (l->value >= MAX_NODES) {
error_setg(errp, "Invalid host-nodes value: %d", l->value);
goto out;
}
}
for (l = host_nodes; l; l = l->next) {
while (l) {
bitmap_set(backend->host_nodes, l->value, 1);
l = l->next;
}
out:
qapi_free_uint16List(host_nodes);
#else
error_setg(errp, "NUMA node binding are not supported by this QEMU");
#endif
@@ -215,7 +191,7 @@ static bool host_memory_backend_get_prealloc(Object *obj, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
return backend->prealloc;
return backend->prealloc || backend->force_prealloc;
}
static void host_memory_backend_set_prealloc(Object *obj, bool value,
@@ -224,6 +200,14 @@ static void host_memory_backend_set_prealloc(Object *obj, bool value,
Error *local_err = NULL;
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
if (backend->force_prealloc) {
if (value) {
error_setg(errp,
"remove -mem-prealloc to use the prealloc property");
return;
}
}
if (!host_memory_backend_mr_inited(backend)) {
backend->prealloc = value;
return;
@@ -234,7 +218,7 @@ static void host_memory_backend_set_prealloc(Object *obj, bool value,
void *ptr = memory_region_get_ram_ptr(&backend->mr);
uint64_t sz = memory_region_size(&backend->mr);
os_mem_prealloc(fd, ptr, sz, backend->prealloc_threads, &local_err);
os_mem_prealloc(fd, ptr, sz, smp_cpus, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
@@ -243,49 +227,14 @@ static void host_memory_backend_set_prealloc(Object *obj, bool value,
}
}
static void host_memory_backend_get_prealloc_threads(Object *obj, Visitor *v,
const char *name, void *opaque, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
visit_type_uint32(v, name, &backend->prealloc_threads, errp);
}
static void host_memory_backend_set_prealloc_threads(Object *obj, Visitor *v,
const char *name, void *opaque, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
Error *local_err = NULL;
uint32_t value;
visit_type_uint32(v, name, &value, &local_err);
if (local_err) {
goto out;
}
if (value <= 0) {
error_setg(&local_err,
"property '%s' of %s doesn't take value '%d'",
name, object_get_typename(obj), value);
goto out;
}
backend->prealloc_threads = value;
out:
error_propagate(errp, local_err);
}
static void host_memory_backend_init(Object *obj)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
MachineState *machine = MACHINE(qdev_get_machine());
/* TODO: convert access to globals to compat properties */
backend->merge = machine_mem_merge(machine);
backend->dump = machine_dump_guest_core(machine);
backend->prealloc_threads = 1;
}
static void host_memory_backend_post_init(Object *obj)
{
object_apply_compat_props(obj);
backend->prealloc = mem_prealloc;
}
bool host_memory_backend_mr_inited(HostMemoryBackend *backend)
@@ -297,7 +246,8 @@ bool host_memory_backend_mr_inited(HostMemoryBackend *backend)
return memory_region_size(&backend->mr) != 0;
}
MemoryRegion *host_memory_backend_get_memory(HostMemoryBackend *backend)
MemoryRegion *
host_memory_backend_get_memory(HostMemoryBackend *backend, Error **errp)
{
return host_memory_backend_mr_inited(backend) ? &backend->mr : NULL;
}
@@ -312,23 +262,6 @@ bool host_memory_backend_is_mapped(HostMemoryBackend *backend)
return backend->is_mapped;
}
#ifdef __linux__
size_t host_memory_backend_pagesize(HostMemoryBackend *memdev)
{
Object *obj = OBJECT(memdev);
char *path = object_property_get_str(obj, "mem-path", NULL);
size_t pagesize = qemu_mempath_getpagesize(path);
g_free(path);
return pagesize;
}
#else
size_t host_memory_backend_pagesize(HostMemoryBackend *memdev)
{
return qemu_real_host_page_size;
}
#endif
static void
host_memory_backend_memory_complete(UserCreatable *uc, Error **errp)
{
@@ -383,10 +316,8 @@ host_memory_backend_memory_complete(UserCreatable *uc, Error **errp)
assert(sizeof(backend->host_nodes) >=
BITS_TO_LONGS(MAX_NODES + 1) * sizeof(unsigned long));
assert(maxnode <= MAX_NODES);
if (maxnode &&
mbind(ptr, sz, backend->policy, backend->host_nodes, maxnode + 1,
flags)) {
if (mbind(ptr, sz, backend->policy,
maxnode ? backend->host_nodes : NULL, maxnode + 1, flags)) {
if (backend->policy != MPOL_DEFAULT || errno != ENOSYS) {
error_setg_errno(errp, errno,
"cannot bind memory to host NUMA nodes");
@@ -400,7 +331,7 @@ host_memory_backend_memory_complete(UserCreatable *uc, Error **errp)
*/
if (backend->prealloc) {
os_mem_prealloc(memory_region_get_fd(&backend->mr), ptr, sz,
backend->prealloc_threads, &local_err);
smp_cpus, &local_err);
if (local_err) {
goto out;
}
@@ -420,6 +351,24 @@ host_memory_backend_can_be_deleted(UserCreatable *uc)
}
}
static char *get_id(Object *o, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(o);
return g_strdup(backend->id);
}
static void set_id(Object *o, const char *str, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(o);
if (backend->id) {
error_setg(errp, "cannot change property value");
return;
}
backend->id = g_strdup(str);
}
static bool host_memory_backend_get_share(Object *o, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(o);
@@ -438,23 +387,6 @@ static void host_memory_backend_set_share(Object *o, bool value, Error **errp)
backend->share = value;
}
static bool
host_memory_backend_get_use_canonical_path(Object *obj, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
return backend->use_canonical_path;
}
static void
host_memory_backend_set_use_canonical_path(Object *obj, bool value,
Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
backend->use_canonical_path = value;
}
static void
host_memory_backend_class_init(ObjectClass *oc, void *data)
{
@@ -466,50 +398,34 @@ host_memory_backend_class_init(ObjectClass *oc, void *data)
object_class_property_add_bool(oc, "merge",
host_memory_backend_get_merge,
host_memory_backend_set_merge, &error_abort);
object_class_property_set_description(oc, "merge",
"Mark memory as mergeable", &error_abort);
object_class_property_add_bool(oc, "dump",
host_memory_backend_get_dump,
host_memory_backend_set_dump, &error_abort);
object_class_property_set_description(oc, "dump",
"Set to 'off' to exclude from core dump", &error_abort);
object_class_property_add_bool(oc, "prealloc",
host_memory_backend_get_prealloc,
host_memory_backend_set_prealloc, &error_abort);
object_class_property_set_description(oc, "prealloc",
"Preallocate memory", &error_abort);
object_class_property_add(oc, "prealloc-threads", "int",
host_memory_backend_get_prealloc_threads,
host_memory_backend_set_prealloc_threads,
NULL, NULL, &error_abort);
object_class_property_set_description(oc, "prealloc-threads",
"Number of CPU threads to use for prealloc", &error_abort);
object_class_property_add(oc, "size", "int",
host_memory_backend_get_size,
host_memory_backend_set_size,
NULL, NULL, &error_abort);
object_class_property_set_description(oc, "size",
"Size of the memory region (ex: 500M)", &error_abort);
object_class_property_add(oc, "host-nodes", "int",
host_memory_backend_get_host_nodes,
host_memory_backend_set_host_nodes,
NULL, NULL, &error_abort);
object_class_property_set_description(oc, "host-nodes",
"Binds memory to the list of NUMA host nodes", &error_abort);
object_class_property_add_enum(oc, "policy", "HostMemPolicy",
&HostMemPolicy_lookup,
host_memory_backend_get_policy,
host_memory_backend_set_policy, &error_abort);
object_class_property_set_description(oc, "policy",
"Set the NUMA policy", &error_abort);
object_class_property_add_str(oc, "id", get_id, set_id, &error_abort);
object_class_property_add_bool(oc, "share",
host_memory_backend_get_share, host_memory_backend_set_share,
&error_abort);
object_class_property_set_description(oc, "share",
"Mark the memory as private to QEMU or shared", &error_abort);
object_class_property_add_bool(oc, "x-use-canonical-path-for-ramblock-id",
host_memory_backend_get_use_canonical_path,
host_memory_backend_set_use_canonical_path, &error_abort);
}
static void host_memory_backend_finalize(Object *o)
{
HostMemoryBackend *backend = MEMORY_BACKEND(o);
g_free(backend->id);
}
static const TypeInfo host_memory_backend_info = {
@@ -520,7 +436,7 @@ static const TypeInfo host_memory_backend_info = {
.class_init = host_memory_backend_class_init,
.instance_size = sizeof(HostMemoryBackend),
.instance_init = host_memory_backend_init,
.instance_post_init = host_memory_backend_post_init,
.instance_finalize = host_memory_backend_finalize,
.interfaces = (InterfaceInfo[]) {
{ TYPE_USER_CREATABLE },
{ }
Loaded 100 of 6866 files, more files were not shown because too many files have changed in this diff. Show more