Add a TPM2 ACPI table if a TPM 2 is used in the backend.
Also add an SSDT for the TPM 2.
Rename tpm_find() to tpm_get_version() and have this function
return the version of the TPM found, TPMVersion_Unspec if
no TPM is found. Use the version number to build version
specific ACPI tables.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In the TPM passthrough backend driver, modify the probing code so
that we can check whether a TPM 1.2 or TPM 2 is being used
and adapt the behavior of the TPM TIS accordingly.
Move the code that tested for a TPM 1.2 into tpm_utils.c
and extend it with test for probing for TPM 2. Have the
function return the version of TPM found.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Following the recent upgrade to version 1.3, extend the TPM TIS
interface with capabilities introduced for support of a TPM 2.
TPM TIS for TPM 2 introduced the following extensions beyond the
TPM TIS 1.3 (used for TPM 1.2):
- A new 32bit interface Id register was introduced.
- New flags for the status (STS) register were defined.
- New flags for the capability flags were defined.
Support the above if a TPM TIS 1.3 for TPM 2 is used with a TPM 2
on the backend side. Support the old TPM TIS 1.3 configuration if a
TPM 1.2 is being used. A subsequent patch will then determine which
TPM version is being used in the backend.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cast 64bit variables to int when used in DPRINTF. They only contain
32bit of data.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Provide the TIS 1.3 capability flags.
The interface now looks like a TIS 1.3 interface. It's fully
compatible with previous TIS 1.2 and drivers written for
TIS 1.2 continue to work.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Extend the backend to check whether the TPM_ContinueSelfTest
finished successfully and provide a flag to the TIS front-end
if it successfully finished. The TIS then sets a flag in
all localities in the STS register and keeps it until the next
reset.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Support for the XFIFO register (range) of the TIS 1.3 specification.
We support a range of 64 bytes.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Improve the access to the registers with 32 and 16 bit reads and writes.
Also enable access to a non-base register address, such as reads of the
2nd byte of a register. Map the FIFO byte access to any byte within
its 4 byte register (following specs).
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
More recent TIS specs extend the STS register to 32 bit. While
we don't store the TIS interface state, yet, we can extend it
without sideeffects.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Create the TCPA log in a separate file rather than allocating
ACPI table memory for it.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch fixes some of the memory leaks in test-visitor-serialization but not all of them.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
QOM-ified the TPM support with much code borrowed from the rng implementation.
All other TPM related code moves will be provided in a subsequent patch.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Message-id: 1364469981.24703.1.camel@d941e-10
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds support for cancelling an executing TPM command.
In Linux for example a user can cancel a command through the TPM's
sysfs 'cancel' entry using
echo "1" > /sysfs/class/misc/tpm0/device/cancel
This patch propagates the cancellation of a command inside a VM
to the host TPM's sysfs entry.
It also uses the possibility to cancel the command before QEMU VM
shutdown or reboot, which helps in preventing QEMU from hanging while
waiting for the completion of the command.
To relieve higher layers or users from having to determine the TPM's
cancel sysfs entry, the driver searches for the entry in well known
locations.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-7-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch is based of off version 9 of Stefan Berger's patch series
"QEMU Trusted Platform Module (TPM) integration"
and adds a new backend driver for it.
This patch adds a passthrough backend driver for passing commands sent to the
emulated TPM device directly to a TPM device opened on the host machine.
Thus it is possible to use a hardware TPM device in a system running on QEMU,
providing the ability to access a TPM in a special state (e.g. after a Trusted
Boot).
This functionality is being used in the acTvSM Trusted Virtualization Platform
which is available on [1].
Usage example:
qemu-system-x86_64 -tpmdev passthrough,id=tpm0,path=/dev/tpm0 \
-device tpm-tis,tpmdev=tpm0 \
-cdrom test.iso -boot d
Some notes about the host TPM:
The TPM needs to be enabled and activated. If that's not the case one
has to go through the BIOS/UEFI and enable and activate that TPM for TPM
commands to work as expected.
It may be necessary to boot the kernel using tpm_tis.force=1 in the boot
command line or 'modprobe tpm_tis force=1' in case of using it as a module.
Regards,
Andreas Niederl, Stefan Berger
[1] http://trustedjava.sourceforge.net/
Signed-off-by: Andreas Niederl <andreas.niederl@iaik.tugraz.at>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-6-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds the main code of the TPM frontend driver, the TPM TIS
interface, to QEMU. The code is largely based on the previous implementation
for Xen but has been significantly extended to meet the standard's
requirements, such as the support for changing of localities and all the
functionality of the available flags.
Communication with the backend (i.e., for Xen or the libtpms-based one)
is cleanly separated through an interface which the backend driver needs
to implement.
Whenever the frontend has collected a complete packet, it will submit
a task to the backend, which then starts processing the command. Once
the result has been returned, the backend invokes a callback function
(tpm_tis_receive_cb()).
Testing the proper functioning of the different flags and localities
cannot be done from user space when running in Linux for example, since
access to the address space of the TPM TIS interface is not possible. Also
the Linux driver itself does not exercise all functionality. So, for
testing there is a fairly extensive test suite as part of the SeaBIOS patches
since from within the BIOS one can have full access to all the TPM's registers.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-3-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds support for TPM command line options.
The command line options supported here are
./qemu-... -tpmdev passthrough,path=<path to TPM device>,id=<id>
-device tpm-tis,tpmdev=<id>,id=<other id>
and
./qemu-... -tpmdev help
where the latter works similar to -soundhw help and shows a list of
available TPM backends (for example 'passthrough').
Using the type parameter, the backend is chosen, i.e., 'passthrough' for the
passthrough driver. The interpretation of the other parameters along
with determining whether enough parameters were provided is pushed into
the backend driver, which needs to implement the interface function
'create' and return a TPMDriverOpts structure if the VM can be started or
'NULL' if not enough or bad parameters were provided.
Monitor support for 'info tpm' has been added. It for example prints the
following:
(qemu) info tpm
TPM devices:
tpm0: model=tpm-tis
\ tpm0: type=passthrough,path=/dev/tpm0,cancel-path=/sys/devices/pnp0/00:09/cancel
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-2-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Remember the original PciInfoList in info_list and use
the info variable to traverse the list.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Move the parsing of a filedescriptor into a common function
qemu_parse_fd() so others can use it as well. Have net.c call this
function.
v2:
- moving qemu_parse_fd into cutils.c
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch fixes a compilation error in xen-mapcache.c .
/home/stefanb/qemu/qemu-git/xen-mapcache.c: In function ‘xen_ram_addr_from_mapcache’:
/home/stefanb/qemu/qemu-git/xen-mapcache.c:240:42: error: variable ‘pentry’ set but not used [-Werror=unused-but-set-variable]
cc1: all warnings being treated as errors
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Berger