Upgrade OpenSBI from v1.3 to v1.3.1 and the pre-built bios images
which fixes the boot failure seen when using QEMU to do a direct
kernel boot with Microchip Icicle Kit board machine.
The v1.3.1 release includes the following commits:
0907de3 lib: sbi: fix comment indent
eb736a5 lib: sbi_pmu: Avoid out of bounds access
7828eeb gpio/desginware: add Synopsys DesignWare APB GPIO support
c6a3573 lib: utils: Fix sbi_hartid_to_scratch() usage in ACLINT drivers
057eb10 lib: utils/gpio: Fix RV32 compile error for designware GPIO driver
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20230719165817.889465-1-bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Upgrade OpenSBI from v1.2 to v1.3 and the pre-built bios images.
The v1.3 release includes the following commits:
440fa81 treewide: Replace TRUE/FALSE with true/false
6509127 Makefile: Remove -N ldflag to prevent linker RWX warning
65638f8 lib: utils/sys: Allow custom HTIF base address for RV32
f14595a lib: sbi: Allow platform to influence cold boot HART selection
6957ae0 platform: generic: Allow platform_override to select cold boot HART
cb7e7c3 platform: generic: Allow platform_override to perform firmware init
8020df8 generic/starfive: Add Starfive JH7110 platform implementation
6997552 lib: sbi_hsm: Rename 'priv' argument to 'arg1'
9e397e3 docs: domain_support: Use capital letter for privilege modes
9e0ba09 include: sbi: Fine grain the permissions for M and SU modes
aace1e1 lib: sbi: Use finer permission semantics for address validation
22dbdb3 lib: sbi: Add permissions for the firmware start till end
1ac14f1 lib: sbi: Use finer permission sematics to decide on PMP bits
44f736c lib: sbi: Modify the boot time region flag prints
20646e0 lib: utils: Use SU-{R/W/X} flags for region permissions during parsing
3e2f573 lib: utils: Disallow non-root domains from adding M-mode regions
59a08cd lib: utils: Add M-mode {R/W} flags to the MMIO regions
001106d docs: Update domain's region permissions and requirements
da5594b platform: generic: allwinner: Fix PLIC array bounds
ce2a834 docs: generic.md: fix typo of andes-ae350
8ecbe6d lib: sbi_hsm: handle failure when hart_stop returns SBI_ENOTSUPP
b1818ee include: types: add always inline compiler attribute
9c4eb35 lib: utils: atcsmu: Add Andes System Management Unit support
787296a platform: andes/ae350: Implement hart hotplug using HSM extension
7aaeeab lib: reset/fdt_reset_atcwdt200: Use defined macros and function in atcsmu.h
a990309 lib: utils: Fix reserved memory node for firmware memory
fefa548 firmware: Split RO/RX and RW sections
2f40a99 firmware: Move dynsym and reladyn sections to RX section
c10e3fe firmware: Add RW section offset in scratch
b666760 lib: sbi: Print the RW section offset
230278d lib: sbi: Add separate entries for firmware RX and RW regions
dea0922 platform: renesas/rzfive: Configure Local memory regions as part of root domain
33bf917 lib: utils: Add fdt_add_cpu_idle_states() helper function
c45992c platform: generic: allwinner: Advertise nonretentive suspend
c8ea836 firmware: Fix fw_rw_offset computation in fw_base.S
8050081 firmware: Not to clear all the MIP
84d15f4 lib: sbi_hsm: Use csr_set to restore the MIP
199189b lib: utils: Mark only the largest region as reserved in FDT
66b0e23 lib: sbi: Ensure domidx_to_domain_table is null-terminated
642f3de Makefile: Add missing .dep files for fw_*.elf.ld
09b34d8 include: Add support for byteorder/endianness conversion
680bea0 lib: utils/fdt: Use byteorder conversion functions in libfdt_env.h
b224ddb include: types: Add typedefs for endianness
aa5dafc include: sbi: Fix BSWAPx() macros for big-endian host
e3bf1af include: Add defines for SBI debug console extension
0ee3a86 lib: sbi: Add sbi_nputs() function
4e0572f lib: sbi: Add sbi_ngets() function
eab48c3 lib: sbi: Add sbi_domain_check_addr_range() function
5a41a38 lib: sbi: Implement SBI debug console extension
c43903c lib: sbi: Add console_puts() callback in the console device
29285ae lib: utils/serial: Implement console_puts() for semihosting
65c2190 lib: sbi: Speed-up sbi_printf() and friends using nputs()
321293c lib: utils/fdt: Fix fdt_pmu.c header dependency
aafcc90 platform: generic/allwinner: Fix sun20i-d1.c header dependency
745aaec platform: generic/andes: Fix ae350.c header dependency
99d09b6 include: fdt/fdt_helper: Change fdt_get_address() to return root.next_arg1
6861ee9 lib: utils: fdt_fixup: Fix compile error
4f2be40 docs: fix typo in fw.md
30ea806 lib: sbi_hart: Enable hcontext and scontext
81adc62 lib: sbi: Align SBI vendor extension id with mvendorid CSR
31b82e0 include: sbi: Remove extid parameter from vendor_ext_provider() callback
c100951 platform: generic: renesas: rzfive: Add support to configure the PMA
2491242 platform: generic: renesas: rzfive: Configure the PMA region
67b2a40 lib: sbi: sbi_ecall: Check the range of SBI error
5a75f53 lib: sbi/sbi_domain: cosmetic style fixes
bc06ff6 lib: utils/fdt/fdt_domain: Simplify region access permission check
17b3776 docs: domain_support: Update the DT example
1364d5a lib: sbi_hsm: Factor out invalid state detection
40f16a8 lib: sbi_hsm: Don't try to restore state on failed change
c88e039 lib: sbi_hsm: Ensure errors are consistent with spec
b1ae6ef lib: sbi_hsm: Move misplaced comment
07673fc lib: sbi_hsm: Remove unnecessary include
8a40306 lib: sbi_hsm: Export some functions
73623a0 lib: sbi: Add system suspend skeleton
c9917b6 lib: sbi: Add system_suspend_allowed domain property
7c964e2 lib: sbi: Implement system suspend
37558dc docs: Correct opensbi-domain property name
5ccebf0 platform: generic: Add system suspend test
908be1b gpio/starfive: add gpio driver and support gpio reset
4b28afc make: Add a command line option for debugging OpenSBI
e9d08bd lib: utils/i2c: Add minimal StarFive jh7110 I2C driver
568ea49 platform: starfive: add PMIC power ops in JH7110 visionfive2 board
506144f lib: serial: Cadence: Enable compatibility for cdns,uart-r1p8
1fe8dc9 lib: sbi_pmu: add callback for counter width
51951d9 lib: sbi_pmu: Implement sbi_pmu_counter_fw_read_hi
60c358e lib: sbi_pmu: Reserve space for implementation specific firmware events
548e4b4 lib: sbi_pmu: Rename fw_counter_value
b51ddff lib: sbi_pmu: Update sbi_pmu dev ops
641d2e9 lib: sbi_pmu: Use dedicated event code for platform firmware events
57d3aa3 lib: sbi_pmu: Introduce fw_counter_write_value API
c631a7d lib: sbi_pmu: Add hartid parameter PMU device ops
d56049e lib: sbi: Refactor the calls to sbi_hart_switch_mode()
e8e9ed3 lib: sbi: Set the state of a hart to START_PENDING after the hart is ready
c6a092c lib: sbi: Clear IPIs before init_warm_startup in non-boot harts
ed88a63 lib: sbi_scratch: Optimize the alignment code for alloc size
73ab11d lib: sbi: Fix how to check whether the domain contains fw_region
f64dfcd lib: sbi: Introduce sbi_entry_count() function
30b9e7e lib: sbi_hsm: Fix sbi_hsm_hart_start() for platform with hart hotplug
8e90259 lib: sbi_hart: clear mip csr during hart init
45ba2b2 include: Add defines for SBI CPPC extension
33caae8 lib: sbi: Implement SBI CPPC extension
91767d0 lib: sbi: Print the CPPC device name
edc9914 lib: sbi_pmu: Align the event type offset as per SBI specification
ee016a7 docs: Correct FW_JUMP_FDT_ADDR calculation example
2868f26 lib: utils: fdt_fixup: avoid buffer overrun
66fa925 lib: sbi: Optimize sbi_tlb
24dde46 lib: sbi: Optimize sbi_ipi
80078ab sbi: tlb: Simplify to tlb_process_count/tlb_process function
bf40e07 lib: sbi: Optimize sbi_tlb queue waiting
eeab500 platform: generic: andes/renesas: Add SBI EXT to check for enabling IOCP errata
f692289 firmware: Optimize loading relocation type
e41dbb5 firmware: Change to use positive offset to access relocation entries
bdb3c42 lib: sbi: Do not clear active_events for cycle/instret when stopping
674e019 lib: sbi: Fix counter index calculation for SBI_PMU_CFG_FLAG_SKIP_MATCH
f5dfd99 lib: sbi: Don't check SBI error range for legacy console getchar
7919530 lib: sbi: Add debug print when sbi_pmu_init fails
4e33530 lib: sbi: Remove unnecessary semicolon
6bc02de lib: sbi: Simplify sbi_ipi_process remove goto
dc1c7db lib: sbi: Simplify BITS_PER_LONG definition
f58c140 lib: sbi: Introduce register_extensions extension callback
e307ba7 lib: sbi: Narrow vendor extension range
042f0c3 lib: sbi: pmu: Remove unnecessary probe function
8b952d4 lib: sbi: Only register available extensions
767b5fc lib: sbi: Optimize probe of srst/susp
c3e31cb lib: sbi: Remove 0/1 probe implementations
33f1722 lib: sbi: Document sbi_ecall_extension members
d4c46e0 Makefile: Dereference symlinks on install
8b99a7f lib: sbi: Fix return of sbi_console_init
264d0be lib: utils: Improve fdt_serial_init
9a0bdd0 lib: utils: Improve fdt_ipi
122f226 lib: utils: Improve fdt_timer
df75e09 lib: utils/ipi: buffer overrun aclint_mswi_cold_init
bdde2ec lib: sbi: Align system suspend errors with spec
aad7a37 include: sbi_scratch: Add helper macros to access data type
5cf9a54 platform: Allow platforms to specify heap size
40d36a6 lib: sbi: Introduce simple heap allocator
2a04f70 lib: sbi: Print scratch size and usage at boot time
bbff53f lib: sbi_pmu: Use heap for per-HART PMU state
ef4542d lib: sbi: Use heap for root domain creation
66daafe lib: sbi: Use scratch space to save per-HART domain pointer
fa5ad2e lib: utils/gpio: Use heap in SiFive and StartFive GPIO drivers
903e88c lib: utils/i2c: Use heap in DesignWare and SiFive I2C drivers
5a8cfcd lib: utils/ipi: Use heap in ACLINT MSWI driver
3013716 lib: utils/irqchip: Use heap in PLIC, APLIC and IMSIC drivers
7e5636a lib: utils/timer: Use heap in ACLINT MTIMER driver
3c1c972 lib: utils/fdt: Use heap in FDT domain parsing
acbd8fc lib: utils/ipi: Use scratch space to save per-HART MSWI pointer
f0516be lib: utils/timer: Use scratch space to save per-HART MTIMER pointer
b3594ac lib: utils/irqchip: Use scratch space to save per-HART PLIC pointer
1df52fa lib: utils/irqchip: Don't check hartid in imsic_update_hartid_table()
355796c lib: utils/irqchip: Use scratch space to save per-HART IMSIC pointer
524feec docs: Add OpenSBI logo and use it in the top-level README.md
932be2c README.md: Improve project copyright information
8153b26 platform/lib: Set no-map attribute on all PMP regions
d64942f firmware: Fix find hart index
27c957a lib: reset: Move fdt_reset_init into generic_early_init
8bd666a lib: sbi: check A2 register in ecall_dbcn_handler.
2552799 include: Bump-up version to 1.3
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20230630160717.843044-1-bmeng@tinylab.org>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Now that we have implemented unified short frames padding in the
QEMU networking codes, the small packet check logic in the receive
path is no longer needed.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Now that we have implemented unified short frames padding in the
QEMU networking codes, remove the same logic in the NIC codes.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Now that we have implemented unified short frames padding in the
QEMU networking codes, remove the same logic in the NIC codes.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Now that we have implemented unified short frames padding in the
QEMU networking codes, remove the same logic in the NIC codes.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Now that we have implemented unified short frames padding in the
QEMU networking codes, remove the same logic in the NIC codes.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Now that we have implemented unified short frames padding in the
QEMU networking codes, remove the same logic in the NIC codes.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Now that we have implemented unified short frames padding in the
QEMU networking codes, remove the same logic in the NIC codes.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Now that we have implemented unified short frames padding in the
QEMU networking codes, remove the same logic in the NIC codes.
This actually reverts commit 40a87c6c9b.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Now that we have implemented unified short frames padding in the
QEMU networking codes, remove the same logic in the NIC codes.
This actually reverts commit 78aeb23ede.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Launch qemu-system-riscv64 with a given dtb for 'sifive_u' and 'virt'
machines, QEMU complains:
qemu_fdt_add_subnode: Failed to create subnode /soc: FDT_ERR_EXISTS
The whole DT generation logic should be skipped when a given DTB is
present.
Fixes: b1f19f238c ("hw/riscv: write bootargs 'chosen' FDT after riscv_load_kernel()")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230228074522.1845007-1-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
riscv_csrrw_check() already does the generic privilege level check
hence there is no need to do the specific M-mode access check in
the mseccfg predicate().
With this change debugger can access the mseccfg CSR anytime.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230228104035.1879882-18-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
At present with a debugger attached sstc CSRs can only be accssed
when CPU is in M-mode, or configured correctly.
Fix it by adjusting their predicate() routine logic so that the
static config check comes before the run-time check, as well as
adding a debugger check.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230228104035.1879882-17-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
At present {h,s}stateen CSRs are not reported in the CSR XML
hence gdb cannot access them.
Fix it by adjusting their predicate() routine logic so that the
static config check comes before the run-time check, as well as
adding a debugger check.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230228104035.1879882-16-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
It's worth noting that the vector CSR predicate() has a similar
run-time check logic to the FPU CSR. With the previous patch our
gdbstub can correctly report these vector CSRs via the CSR xml.
Commit 719d3561b2 ("target/riscv: gdb: support vector registers for rv64 & rv32")
inserted these vector CSRs in an ad-hoc, non-standard way in the
riscv-vector.xml. Now we can treat these CSRs no different from
other CSRs.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230228104035.1879882-13-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Since commit 94452ac4cf ("target/riscv: remove fflags, frm, and fcsr from riscv-*-fpu.xml")
the 3 FPU CSRs are removed from the XML target decription. The
original intent of that commit was based on the assumption that
the 3 FPU CSRs will show up in the riscv-csr.xml so the ones in
riscv-*-fpu.xml are redundant. But unforuantely that is not true.
As the FPU CSR predicate() has a run-time check on MSTATUS.FS,
at the time when CSR XML is generated MSTATUS.FS is unset, hence
no FPU CSRs will be reported.
The FPU CSR predicate() already considered such a case of being
accessed by a debugger. All we need to do is to turn on debugger
mode before calling predicate().
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230228104035.1879882-12-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
At present the odd-numbered PMP configuration registers for RV64 are
reported in the CSR XML by QEMU gdbstub. However these registers do
not exist on RV64 so trying to access them from gdb results in 'E14'.
Move the pmpcfgX index check from the actual read/write routine to
the PMP CSR predicate() routine, so that non-existent pmpcfgX won't
be reported in the CSR XML for RV64.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230228104035.1879882-11-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
At present riscv_csrrw_check() checks the CSR predicate() against
NULL and throws RISCV_EXCP_ILLEGAL_INST if it is NULL. But this is
a pure software check, and has nothing to do with the emulation of
the hardware behavior, thus it is inappropriate to return illegal
instruction exception when software forgets to install the hook.
Change to use g_assert() instead.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li<liweiwei@iscas.ac.cn>
Message-ID: <20230228104035.1879882-4-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The priority policy of riscv_csrrw_check() was once adjusted in
commit eacaf44019 ("target/riscv: Fix priority of csr related check in riscv_csrrw_check")
whose commit message says the CSR existence check should come before
the access control check, but the code changes did not agree with
the commit message, that the predicate() check actually came after
the read / write check.
In fact this was intentional. Add some comments there so that people
won't bother trying to change it without a solid reason.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li<liweiwei@iscas.ac.cn>
Message-ID: <20230228104035.1879882-3-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The gdbstub CSR XML is dynamically generated according to the result
of the CSR predicate() result. This has been working fine until
commit 7100fe6c24 ("target/riscv: Enable privileged spec version 1.12")
introduced the privilege spec version check in riscv_csrrw_check().
When debugging the 'sifive_u' machine whose priv spec is at 1.10,
gdbstub reports priv spec 1.12 CSRs like menvcfg in the XML, hence
we see "remote failure reply 'E14'" message when examining all CSRs
via "info register system" from gdb.
Add the priv spec version check in the CSR XML generation logic to
fix this issue.
Fixes: 7100fe6c24 ("target/riscv: Enable privileged spec version 1.12")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230228104035.1879882-2-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
At present create_fdt() calls htif_uses_elf_symbols() to determine
whether to insert a <reg> property for the HTIF. This unfortunately
creates a hidden dependency to riscv_load_{firmware,kernel} that
create_fdt() must be called after the ELF {firmware,kernel} image
has been loaded.
Decouple such dependency be adding a new parameter to create_fdt(),
whether custom HTIF base address is used. The flag will be set if
non ELF {firmware,kernel} image is given by user.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20221229091828.1945072-13-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Rename previous riscv_find_firmware() to riscv_find_bios(), and
introduce a new riscv_find_firmware() to implement the first half
part of the work done in riscv_find_and_load_firmware().
This new API is helpful for machine that wants to know the final
chosen firmware file name but does not want to load it.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221229091828.1945072-12-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At present the HTIF proxy syscall is unsupported. On RV32, only
device 0 is supported so there is no console device for RV32.
The only way to implement console funtionality on RV32 is to
support the SYS_WRITE syscall.
With this commit, the Spike machine is able to boot the 32-bit
OpenSBI generic image.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221229091828.1945072-8-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The pending register upper limit is currently set to
plic->num_sources >> 3, which is wrong, e.g.: considering
plic->num_sources is 7, the upper limit becomes 0 which fails
the range check if reading the pending register at pending_base.
Fixes: 1e24429e40 ("SiFive RISC-V PLIC Block")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-16-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At present the SiFive PLIC model "priority-base" expects interrupt
priority register base starting from source 1 instead source 0,
that's why on most platforms "priority-base" is set to 0x04 except
'opentitan' machine. 'opentitan' should have set "priority-base"
to 0x04 too.
Note the irq number calculation in sifive_plic_{read,write} is
correct as the codes make up for the irq number by adding 1.
Let's simply update "priority-base" to start from interrupt source
0 and add a comment to make it crystal clear.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Message-Id: <20221211030829.802437-14-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 28d8c28120 ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine")
changed the value of VIRT_IRQCHIP_NUM_SOURCES from 127 to 53, which
is VIRTIO_NDEV and also used as the value of "riscv,ndev" property
in the dtb. Unfortunately this is wrong as VIRT_IRQCHIP_NUM_SOURCES
should include interrupt source 0 but "riscv,ndev" does not.
While we are here, we also fix the comments of platform bus irq range
which is now "64 to 96", but should be "64 to 95", introduced since
commit 1832b7cb3f ("hw/riscv: virt: Create a platform bus").
Fixes: 28d8c28120 ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-13-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At present the default value of "num-sources" property is zero,
which does not make a lot of sense, as in sifive_plic_realize()
we see s->bitfield_words is calculated by:
s->bitfield_words = (s->num_sources + 31) >> 5;
if the we don't configure "num-sources" property its default value
zero makes s->bitfield_words zero too, which isn't true because
interrupt source 0 still occupies one word.
Let's change the default value to 1 meaning that only interrupt
source 0 is supported by default and a sanity check in realize().
While we are here, add a comment to describe the exact meaning of
this property that the number should include interrupt source 0.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-9-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At present the PLIC config parser can only handle legal config string
like "MS,MS". However if a config string like ",MS,MS,,MS,MS,," is
given the parser won't get the correct configuration.
This commit improves the config parser to make it more robust.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-7-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
hw/pci/Kconfig says MSI_NONBROKEN should be selected by interrupt
controllers regardless of how MSI is implemented. msi_nonbroken is
initialized to true in both riscv_aplic_realize() and
riscv_imsic_realize().
Select MSI_NONBROKEN in RISCV_APLIC and RISCV_IMSIC.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221211030829.802437-2-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
hw/pci/Kconfig says MSI_NONBROKEN should be selected by interrupt
controllers regardless of how MSI is implemented. msi_nonbroken is
initialized to true in sifive_plic_realize().
Let SIFIVE_PLIC select MSI_NONBROKEN and drop the selection from
RISC-V machines.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Message-Id: <20221211030829.802437-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The priv spec v1.12 says:
If no PMP entry matches an M-mode access, the access succeeds. If
no PMP entry matches an S-mode or U-mode access, but at least one
PMP entry is implemented, the access fails. Failed accesses generate
an instruction, load, or store access-fault exception.
At present the exception cause is set to 'illegal instruction' but
should have been 'instruction access fault'.
Fixes: d102f19a20 ("target/riscv/pmp: Raise exception if no PMP entry is configured")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221205065303.204095-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
sstatus register dump is currently missing in riscv_cpu_dump_state().
As sstatus is a copy of mstatus, which is described in the priv spec,
it seems redundant to print the same information twice.
Add some comments for this to let people know this is intentional.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221125050354.3166023-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng